1 Quit Connecting to a Projector via Video Cable Overview This documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors located in all 2006 construction classrooms throughout the building using the physical cable connection. Learning Objective Independently learn how to connect the computer to the LCD projector via the physical video cable. Prerequisi tes Knowledge of: The computer desktop and how to operate a remote control. Access to: A Tablet PC, classroom with ceiling mounted Epson 835p projector, monitor cable for connection. Primary Audience Lake Forest Country Day School Faculty and Staff Author Brad Cooper, Systems Support Specialist I Keith Gillette, Director of Information Technology Lake Forest Country Day School Instructio ns Arrows change slides. Print button prints all slides to default printer. Quit exits.
4
Embed
0Quit Connecting to a Projector via Video Cable OverviewThis documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1Quit
Connecting to a Projector via Video Cable
Overview This documentation will show how to connect a Tablet PC to the Epson 835p ceiling-mounted LCD projectors located in all 2006 construction classrooms throughout the building using the physical cable connection.
LearningObjective
Independently learn how to connect the computer to the LCD projector via the physical video cable.
Prerequisites Knowledge of: The computer desktop and how to operate a remote control.Access to: A Tablet PC, classroom with ceiling mounted Epson 835p projector, monitor cable for connection.
PrimaryAudience
Lake Forest Country Day School Faculty and Staff
Author Brad Cooper, Systems Support Specialist IKeith Gillette, Director of Information TechnologyLake Forest Country Day School
Instructions Arrows change slides. Print button prints all slides to default printer. Quit exits.
2Quit
Connecting to a Projector via Video Cable (1/2)
1. Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote
2. Point remote at projector & push the red Power button
– The projector will beep– The status light on the projector will begin to flash green– The projector will display auto-setup on the screen
3. Wait for the projector to finish focusing before connecting the cable. (See next slide.)
4. Push the Comp1 source button on projector remote
5. Locate the cable with the Video plug& Audio plug:
3Quit
6. Connect the Video connector to the monitor port
7. Connect the Audio plug to the headphone or speaker jack
8. As needed, hold Fn + press & release F4 to cycle through 4 output options:
9. As needed, adjust the Tablet PC & ceiling speaker volume.
Connect to Expansion Base ← or → directly to EliteBook 2740p
Connecting to a Projector via Video Cable (2/2)
HP Ultra-slim Expansion Base HP EliteBook 2740p direct connection
Ceiling speaker remote control
4Quit
The End!
Document Control
Version Date Complete Author Description Date Approved Approved By