0Job Number 5502 “CMM Programmer-Airfoils” Job Location(s): Minnetonka, MN Employment Type Full Time Hours per Week: 40 Work Hours (i.e. shift): 1st shift; M-F Start Date: asap Starting Salary Range: $22-28 Required Education: Certification or Vocational Required Experience: 6 + yrs Position Description Our company is looking for a full time CMM Programmer that has previous experience inspecting airfoils for the Aerospace industry. This person will perform dimensional inspection of manufactured components using hand tools and a variety of automated inspection equipment. Primarily performs advanced inspections but may include a number of intermediate and basic activities. Prepares accurate inspection records for delivery to the customer. Maintains cleanliness of equipment and work environment. ESSENTIAL FUNCTIONS: • Sets up and inspects customer-supplied products, specifically airfoils and airfoil-related products, using a variety of equipment, including hand tools, comparators, touch-probe CMMs including Zeiss and Brown & Sharpe. Inspections include first articles, special tests, capability studies, and gage R&R studies. • Maintains information systems. Completes accurate records (on paper and electronic data) in order to provide customers with excellent results. Also completes accurate records for continuous improvement. These records include inspection reports, time cards, training records, equipment maintenance logs, continuous improvement initiatives, and corrective action reports. Understands the function and purpose of these records. Completes records neatly with a goal for 100% accuracy of content and spelling. • Performs intermediate checks of equipment to confirm calibration before use. • Works with others to have verification checks performed on failures. • Assists in receiving materials. Lifts, carries, and palletizes product. • Cleans work areas and common building areas according to documented procedures. Organizes work and storage areas for efficient workflow and to showcase the quality of work in the lab. • Interfaces directly with customers to confirm job expectations at job start. Works directly with customers on problem-solving assignments. Participates in customer meetings as needed. • Performs source inspections and customer on-site inspections as assigned. EDUCATION, EXPERIENCE, AND COMPETENCIES REQUIRED • Six years experience in precision inspection of airfoils and airfoil-related components using a wide range of inspection equipment. • Professional attitude, appearance, and organization of work area. • Demonstrates outstanding character in the workplace. • Demonstrates a working knowledge of all equipment, a thorough understanding of equipment mechanics, capability, and limitations. Knows how to inspect for wear and inaccuracy or when to recommend recalibration. • Has developed advanced written and oral communication skills. Demonstrates good interpersonal skills in building effective working relationships with customers and coworkers. • Demonstrates a teachable attitude for optimal learning and career growth. • Demonstrates the ability to manage time effectively, prioritize work, analyze and solve problems, and complete paperwork accurately. • Experience working independently under pressure with multiple deadlines. • Performs jobs with an average labor utilization of 92% or higher and with nearly no errors. • Ability to lift a minimum of 50 lbs occasionally and to sit at a single workstation for an entire shift, with scheduled breaks. Job Number 5687 “3D Inspection Technician” Job Location(s): Bloomington, MN Employment Term: Regular Employment Type Full Time Hours per Week: 40 Starting Salary Range: $40-50K/yr
14
Embed
0Job Number 5502 “CMM Programmer Airfoils” - …mnasq.org/wp-content/uploads/postings/Various-Positions.pdf · 0Job Number 5502 “CMM Programmer-Airfoils ... strong blue print
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
0Job Number 5502 “CMM Programmer-Airfoils”
Job Location(s): Minnetonka, MN
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 1st shift; M-F
Start Date: asap
Starting Salary Range: $22-28
Required Education: Certification or Vocational
Required Experience: 6 + yrs
Position Description
Our company is looking for a full time CMM Programmer that has previous experience inspecting airfoils for the Aerospace industry. This person will perform dimensional inspection of manufactured components using hand tools and a variety of
automated inspection equipment. Primarily performs advanced inspections but may include a number of intermediate and basic activities. Prepares accurate inspection records for delivery to the customer. Maintains cleanliness of equipment and work
environment.
ESSENTIAL FUNCTIONS:
• Sets up and inspects customer-supplied products, specifically airfoils and airfoil-related products, using a variety of equipment, including hand tools, comparators, touch-probe CMMs including Zeiss and Brown & Sharpe. Inspections include first articles, special
tests, capability studies, and gage R&R studies. • Maintains information systems. Completes accurate records (on paper and electronic data) in order to provide customers with
excellent results. Also completes accurate records for continuous improvement. These records include inspection reports, time cards, training records, equipment maintenance logs, continuous improvement initiatives, and corrective action reports.
Understands the function and purpose of these records. Completes records neatly with a goal for 100% accuracy of content and spelling.
• Performs intermediate checks of equipment to confirm calibration before use.
• Works with others to have verification checks performed on failures. • Assists in receiving materials. Lifts, carries, and palletizes product.
• Cleans work areas and common building areas according to documented procedures. Organizes work and storage areas for efficient workflow and to showcase the quality of work in the lab.
• Interfaces directly with customers to confirm job expectations at job start. Works directly with customers on problem-solving assignments. Participates in customer meetings as needed.
• Performs source inspections and customer on-site inspections as assigned.
EDUCATION, EXPERIENCE, AND COMPETENCIES REQUIRED
• Six years experience in precision inspection of airfoils and airfoil-related components using a wide range of inspection equipment. • Professional attitude, appearance, and organization of work area.
• Demonstrates outstanding character in the workplace. • Demonstrates a working knowledge of all equipment, a thorough understanding of equipment mechanics, capability, and
limitations. Knows how to inspect for wear and inaccuracy or when to recommend recalibration. • Has developed advanced written and oral communication skills. Demonstrates good interpersonal skills in building effective
working relationships with customers and coworkers.
• Demonstrates a teachable attitude for optimal learning and career growth. • Demonstrates the ability to manage time effectively, prioritize work, analyze and solve problems, and complete paperwork
accurately. • Experience working independently under pressure with multiple deadlines.
• Performs jobs with an average labor utilization of 92% or higher and with nearly no errors.
• Ability to lift a minimum of 50 lbs occasionally and to sit at a single workstation for an entire shift, with scheduled breaks.
Job Number 5687 “3D Inspection Technician”
Job Location(s): Bloomington, MN
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Starting Salary Range: $40-50K/yr
Required Education: High School or Equivalent
Required Experience: 1+ yrs
Position Description
An engineering firm specializing in 3D scanning and metrology solutions is currently looking for a motivated 3D Inspection Technician to add to our growing company.
Our engineers and management have been providing world-class 3D scanning, CAD modeling and quality inspection services to a variety of industries worldwide for over 30 years. As a leader in the 3D scanning industry, we are constantly evolving in order to
stay on top. Our projects are as varied as any real world object, including, but not limited to, tiny figurines, entire planes, cast parts, sculptures, electronic devices including cell phones, turbine blades, guns, race cars, boats, national treasures and more. We
never know what new and exciting projects are around the corner, which keeps us on our toes and forces us to be ready for the
unexpected.
We are searching for the perfect candidate to join our team working with these exciting projects!
The 3D Inspection Technician will perform: * In-house 3D scanning and measurement using the appropriate tool for the job
* On-site 3D scanning at client locations within the metro area and around the globe * Post processing of 3D scanning and measurement data to prepare scan data for inspection
* Engineering 3D scan data into CAD models
* CAD modeling and design
We are looking for a candidate who is/has: * Working knowledge of GD&T (MUST have)
DOE, FMEA and Risk Management processes preferred.
Statistical process management software (Minitab) preferred.
Microsoft Office at an Intermediate or higher level required.
Trigonometry, Geometry and Algebra required.
ISO 13485 or 9001 preferred.
Microsoft Project preferred.
Experience:
5+ years work experience as a Product Designer utilizing Design Control
Procedures with Medical Devices (in an ISO 13485 or ISO 9001certified company) required.
5+ years experience on Product Development teams with Medical Devices required.
3+ years experience with Auto CAD2000 or higher preferred.
4+ years experience with Solid Works required.
Job order number 5822 “Visual Inspector”
Visual Inspector
Location-Miami, FL
Salary: DOQ
A well-established company in Florida is looking for an above-average visual Inspector with experience. Candidate is responsible for comparing Master Control to product that has been submitted for inspection as well as to visually inspect the submitted product on a 100% basis.
Job Order Number 5833 “Director of Continuous Improvement”
Job Location(s): Dallas, TX
Employment Type Full Time
Hours per Week: 40
Start Date: asap
Starting Salary Range: $90-100K
Required Education: High School or Equivalent
Required Experience: 1+ yrs
Position Description
We are happy to partner with a growing company in the Dallas/Ft. Worth area who is looking for a Director of Continuous Quality Improvement. The ideal candidate will have a strong project management background and the ability to effectively communicate
with employees and clients on all levels. Proven leadership in a fast-paced setting managing multiple deadlines and conflicting tasks is a must. Experience implementing quality programs involving metrics a plus. This company houses an ever-changing environment
and they need someone who can keep up! Relocation assistance possible for the right candidate.
Job Order number 5835 “Engineering Specialist-Cabinets”
Job Location(s): Milwaukee, WI; Hudson, WI; St. Paul, MN
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Starting Salary Range: $51-61,000 K
Required Education: Associate Degree
Required Experience: 1+
Position Description
Our company is looking for an Engineering Specialist to address engineering questions and problems and perform work primarily
on the cabinet product line as well as support custom walk-in refrigeration systems and our product line. This candidate will process engineering changes and perform assembly of new products in the test area and prepare and create product designs and
concepts from sales and marketing for new products and one of a kind special customer orders. This includes meeting cost, appearance and product data as set by sales and marketing specifications.
Qualified candidates will have considerable knowledge in design proficiency in CAD systems, strong analytical skills. Candidates
should also have an Associates Degree in related field or five years experience or equivalent combination of education and work experience.
Skill with: Excel spreadsheets and Access databases, written (technical) and verbal communication
Ability to: prioritize and manage multiple priorities and learn manufacturing systems and processes
Basic knowledge of: mechanical engineering concepts and principles and refrigeration systems design and operation.
This is a great opportunity to work with a fantastic brand in an interesting and challenging position! We look forward to meeting
you and discussing this position further.
Job Order Number 5836 “CMM Programmer”
Job Location(s): Minneapolis, MN
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 4:30pm-3am M-TH & 2:30-10:30 F
Start Date: asap
Starting Salary Range: up to $24
Required Education: High School or Equivalent
Required Experience: 1+
Position Description
We have an immediate need for a 2nd shift CMM Programmer in our Machining Division.
Primary responsibilities for this position include programming a Brown and Sharp Global Advantage CMM and inspecting parts as
necessary. The successful candidate will possess experience working in a precision machining environment, 2+ years of programming experience on PC-DMIS version 4.3 and above, experience with offline programming from CAD models, Catia V5
knowledge is a plus, solid inspection skills, strong blue print reading and geometric dimensioning and tolerancing skills, and basic SPC skills. High school diploma or equivalent required.
Qualified candidates are highly encouraged to apply now! We look forward to meeting you.
Job Order Number 5848 “CMM Programmer- Lead”
Job Location(s): Minnetonka, MN
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 2nd shift
Start Date: asap
Starting Salary Range: DOE
Required Education: High School or Equivalent
Required Experience: 1+
Position Description
The QC Group, Inc. located in Minnetonka, MN is looking for a Lead CMM Programmer. Our company just moved to a brand new
facility and is growing by leaps and bounds. Come and work for a company that values its external customers as well as it's internal!
Perform coordinate measuring machine operation and part layout.
Position Requirements
Must have excellent written and verbal communication skills. Must have working knowledge with personal computers. Must have
high school diploma or GED. Must understand concepts of geometric dimensioning, tolerancing and part inspection. Previous
experience in operation of CMM, or demonstrate ability to be trained in operation of CMM.
Duties and Responsibilities
• Operation of coordinate measuring machine and other precision measuring devices such as the optical comparator, bench micrometer, standard gages, height master, profilometer concentricity/roundness checker, etc.
• Inspect and approve first piece production on any new set-ups • Maintain records of inspection for layout of new and/or repaired tools
• Perform CMM dimensional inspection of fixtures and gages for calibration purposes • Ensure all parts to be inspected are properly identified
• Maintain files as per prescribed by work instructions and procedures
• Maintain condition of inspection equipment • Inspection of incoming component parts, fixtures and tools
• Create complex programs using the CAD model • Perform other associated duties as needed to continue the productive operation of the department and division.
• Keep work area clean and orderly.
Job Order Number 5850 “Product Release Technician”
Location-Auburn Hills, MI Pay: $20/hr
Our client is currently seeking a Product Release Technician for their facility in Auburn, Michigan. This person would be responsible for ensuring compliance to policies, procedures, GMP (good manufacturing practices) and ISO (international organization for standardization) requirements of documentation for product release. Candidate needs demonstrated skill in inspection and review of documentation as well as a minimum of 2 yrs exp in QA/ QC or equivalent.
Additionally, the ideal candidate will possess the following knowledge and experience:
Knowledge of precision tolerancing, component assembly operations and small piece part assembly.
Knowledge of quality system for corrective action, product segregation, non-conformity
Extensive working knowledge of GMP/ISO Regulations and requirements.
Ability to operate in Windows & some applicable information system.
Must have Knowledge of I-sheets, change control systems, corrective action system, material spec, routers and purchase requisitions.
Qualified candidates with great communication skills are highly encouraged to apply now!
Job Number 5865 “Quality Supervisor”
Job Location(s): Minneapolis, MN
Employment Type Full Time
Work Hours (i.e. shift): days flex
Start Date: asap
Starting Salary Range: $25-30/hr
Required Education: High School or Equivalent
Required Experience: 1 +
Position Description
Fantastic company just outside Minneapolis in search of a top-notch Quality Supervisor.
Candidate must have quality machining experience, preferably in the aircraft, hydraulic, and semiconductor industries. This
position is multifaceted; requiring hands-on technical knowledge and ability to operate within an ISO environment. Ability to read complex/non-typical part specifications and package to various certifications is necessary. Print reading/GD&T and high level
quality tool proficiency required (calibration, gaging, SPC, etc.). The ability to communicate well, dedication to continuous learning and improvement, and ability to lead/take initiative are important aspects of this position.
We look forward to meeting with you and discussing this great opportunity!
Job Order Number 5867 “Inspector”
Job Location(s): Chicago, IL
Hours per Week: 40
Work Hours (i.e. shift): 6-2:30
Start Date: asap
Starting Salary Range: $15-20/hr
Required Education: High School or Equivalent
Required Experience: 1+
Position Description
We have a metal stamping company in the automotive industry that is in search of an Inspector. Candidate needs: knowledge of TS16949 and to know how to complete PPAPS (production part approval process). What a great
opportunity to do some more on the job learning as well as possibly get your foot in the door with an established company!
We look forward to meeting with you and discussing this great opportunity!
Job Order Number 5868 “Quality Supervisor”
Job Location(s): Minneapolis, MN; Brooklyn Park, MN; Coon Rapids, MN
Hours per Week: 40
Work Hours (i.e. shift): 6-3:30 (M-TH); 6-10 (F)
Start Date: asap
Starting Salary Range: Please contact
Required Education: High School or Equivalent
Required Experience: 1 +
Position Description
Are you a quality candidate that is technically focused with the ability to communicate well with customers and peers? If so then
read on!
Our company, which works in precision CNC Milling of close tolerance parts, is looking for an experienced Quality Supervisor that is skilled, a self-starter, and prepared to lead the quality department in the aerospace/defense industry.
CMM Programming ability is a must (PCDMIS software experience preferred). 30% to 40% of job duty/time is CMM Programming; final and in-process inspection as primary focus.
Required: Calibration, supplier regulation, audit experience and ISO knowledge
We look forward to meeting with you and speaking with you further regarding this fantastic opportunity!
Job Order Number 5874 ‘QA Tech’ Job Location(s): St. Paul, MN; Minneapolis, MN
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Start Date: asap
Starting Salary Range: $22/hr
Required Education: Certification or Vocational
Required Experience: 3 +
Position Description
Ability to work under pressure? Make reliable decisions? Strong interpersonal skills? Good computer skills?
If this sounds like you than read on!
Our company, located just outside Minneapolis, is looking for a top-notch Quality Assurance Technician. This candidate will be
responsible for continuously improving the quality of the product and manufacturing operations by performing the following
duties...
Perform incoming material inspections per documented procedures by interpreting engineering drawings and testing / inspecting product using a variety of metrologies including, but not limited to: calipers, micrometers, height gages, thread
gages, pin gages, optical comparators.
Maintain incoming quality inspection files including, but not limited to: current print revision levels, material certifications, and inspection logs.
Implement the Supplier Corrective Action process per documented procedures
Facilitate MRB activities per documented procedures
Facilitate the Warranty and Annual Returns Process per documented procedures
Document and track results of warranty evaluations and supply data to be used for continuous process improvement and
metrics.
Perform Dock Audits per documented procedures.
Provide support to Quality Engineers, Production, and Design Engineers as needed. And utilizing the following skills…
Excellent verbal and written communication skills including: customer / supplier interaction and communications.
Ability to meet deadlines; accomplish work in order of priority; professionally maintain composure and effectiveness under pressure and changing conditions.
Ability to learn new duties and adjust to new situations encountered on the job within a reasonable amount of time.
Customer Requirements: TS16949, Customer Quality System
Computer Skills: MS Word, Excel, Minitab, Lotus Notes
Technical: Print reading, GD&T, Product & Process knowledge, Metrology, SAP, Use common electrical/mechanical product evaluation equipment, strong interpersonal skills, good computer skills.
The Qualified candidate will have the following experience and education…
Vocational degree or 5 years of experience in a manufacturing environment with 3 years in quality assurance.
3-5 years of experience in a manufacturing environment.
1-3 years of experience facilitating warranty process claims and resolution including customer interactions and communications.
Supplemental education in manufacturing quality assurance courses or seminars.
Ability to interpret electrical & mechanical drawings, specifications and manuals.
This is a great opportunity to solidify the skills you already have and learn about a great company!
Qualified candidates are highly encouraged to apply now; this position will not last long. We look forward to meeting you!
Job Order Number 5888 ‘Quality Technician’
Job Location(s): Milwaukee, WI
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Start Date: asap
Starting Salary Range: DOQ
Required Education: High School or Equivalent
Required Experience: 1 to 20+ years
Position Description
We have an exciting opportunity for an experienced Quality Technician who wants to work for a growing company! This may be
your opportunity to get your foot in the door! Solidify the experience you have already! Pick up some new skills; we are looking for someone who knows or has a willingness to learn programming.
This is a great job that won’t last long. We are looking for a top-notch candidate with experience participating in Gage R&R and
Capability Studies. This ideal candidate will be a CQT and/or CCT. As well as have solid skills in: blueprint reading, in-process inspection, gage calibration, working with PPAP's and ISIR's.
Thread knowledge; english and metric and GD&T and CMM Operation a HUGE plus.
Job Order Number 5889 ‘QA Tech’
Ability to work under pressure? Make reliable decisions? Strong interpersonal skills? Good computer skills?
If this sounds like you than read on!
Our company, located just outside Minneapolis, is looking for a top-notch Quality Assurance Technician. This candidate will be
responsible for continuously improving the quality of the product and manufacturing operations by performing the following
duties...
Perform incoming material inspections per documented procedures by interpreting engineering drawings and testing / inspecting product using a variety of metrologies including, but not limited to: calipers, micrometers, height gages, thread gages, pin gages, optical comparators.
Maintain incoming quality inspection files including, but not limited to: current print revision levels, material certifications, and inspection logs.
Implement the Supplier Corrective Action process per documented procedures
Facilitate MRB activities per documented procedures
Facilitate the Warranty and Annual Returns Process per documented procedures
Document and track results of warranty evaluations and supply data to be used for continuous process improvement and metrics.
Perform Dock Audits per documented procedures.
Provide support to Quality Engineers, Production, and Design Engineers as needed.
And utilizing the following skills…
Excellent verbal and written communication skills including: customer / supplier interaction and communications.
Ability to meet deadlines; accomplish work in order of priority; professionally maintain composure and effectiveness under pressure and changing conditions.
Ability to learn new duties and adjust to new situations encountered on the job within a reasonable amount of time.
Customer Requirements: TS16949, Customer Quality System
Computer Skills: MS Word, Excel, Minitab, Lotus Notes
Technical: Print reading, GD&T, Product & Process knowledge, Metrology, SAP, Use common electrical/mechanical product evaluation equipment, strong interpersonal skills, good computer skills.
The Qualified candidate will have the following experience and education…
Vocational degree or 5 years of experience in a manufacturing environment with 3 years in quality assurance.
3-5 years of experience in a manufacturing environment.
1-3 years of experience facilitating warranty process claims and resolution including customer interactions and communications.
Supplemental education in manufacturing quality assurance courses or seminars.
Ability to interpret electrical & mechanical drawings, specifications and manuals.
This is a great opportunity to solidify the skills you already have and learn about a great company!
Qualified candidates are highly encouraged to apply now; this position will not last long. We look forward to
meeting you!
Job Order Number 5897 ‘Construction Quality Manager’ Job Location(s): Minneapolis, MN; San Francisco, CA; Woodbridge, CA
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 1st
Start Date: asap
Starting Salary Range: DOE
Required Education: Certification or Vocational
Required Experience: 10+
Great position! Great pay! Great Opportunity! CQCM with PE License Needed for Rail/Light Rail Project in the Bay area...
Our client, a leading program and construction management services firm specializing in a full spectrum of program management, construction management, and related construction support services, is seeking a Construction Quality Control Manager for a
Rail/Light Rail project in the Bay area that will be responsible for developing, updating, and verifying compliance while managing both the design and construction of the project.
Relocation available for the right candidate!!
Experience Required:
10+ years background in quality management in a construction environment
PE License
Design Build
Rail/Light Rail
Civil Engineering
Experience Preferred:
Quality Manager ASQ Certification
Licensed PE in the stated of CA
15+ years in of design and construction experience
Job Order Number 5900 ‘Quality Assurance Specialist’
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 1st shift
Start Date: asap
Starting Salary Range: $38-45K
Required Education: Associate Degree
Required Experience: 1 +
Position Description
Our company is seeking an experienced Quality Assurance Specialist to provide technical expertise to establishing and
understanding quality criteria for production to ensure that both internal and external customer satisfaction is maintained. The qualified candidate will also perform internal calibrations for micrometers and calipers and to facilitate external calibration as
required to maintain compliance.
QUALIFICATIONS:
Associate degree in related field or High School diploma with quality auditing experience
Certified as Lead Auditor ISO9001:2008
Technical writing experience
Experience in delivering training and presentations
Experience in the use and application of quality control tools, Pareto, root cause analysis, line charts, check sheets etc.
Work for a growing company that offers flexible first shift hours!
Qualified candidates are highly encouraged to apply now.
Job Order Number 5903 ‘Construction Quality Control Manager’
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 1st
Start Date: asap
Starting Salary Range: DOE
Required Education: Certification or Vocational
Required Experience: 10+
Position Description
Great position! Great pay! Great Opportunity!
Construction Quality Control Manager Needed for Rail/Light Rail Project in the Bay Area
Our client, a leading program and construction management services firm specializing in a full spectrum of program management, construction management, and related construction support services, is seeking a Construction Quality Control Manager for a
Rail/Light Rail project in the Bay area that will be responsible for developing, updating, and verifying compliance while managing both the design and construction of the project.
Relocation available for the right candidate!! Experience Required:
10+ years background in quality management in a construction environment
Rail/Light Rail
Civil Engineering
Experience Preferred But Not Required:
Licensed PE in the stated of CA
15+ years in of design and construction experience
Design Build
Qualified candidates are highly encouraged to apply now!
Job Order Number 5908 ‘CMM Operator’
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 2nd shift
Start Date: asap
Starting Salary Range: $20-30/hr
Required Education: High School or Equivalent
Required Experience: 6+
Position Description
The QC Group, is searching for the right candidate for a great and unique opportunity!
We are searching for just the right person to help us grow our business in Albuquerque, New Mexico. Training will begin in Minnesota, but candidate will be moved with all relocation expenses covered, to our new lab in New Mexico.
We are hiring an inspector who can perform dimensional inspection of manufactured components using hand tools and a variety of
automated inspection equipment. This position would primarily perform advanced inspections but may include a number of intermediate and basic activities.
Do you work well with others; peers and customers in a team environment?
Additionally you will:
Set up and inspect customer-supplied products, using a variety of equipment
Maintain information systems. Completes records neatly with a goal for 100% accuracy of content and spelling.
Assist in receiving materials. Lifts, carries, and palletizes product.
Clean work areas, building maintenance or improvements, and common building areas according to documented procedures. Organizes work and storage areas.
Successfully completes additional classroom training as needed. Remains familiar with current technology by reading industry periodicals and books, learning from videos, taking QC classes, and pursuing outside training and educational
opportunities.
EDUCATION, EXPERIENCE, AND COMPETENCIES REQUIRED
Six years experience in precision inspection of a variety of mechanical components using a wide range of inspection equipment.
Professional attitude, appearance, and organization of work area.
Demonstrates outstanding character in the workplace.
Demonstrates a working knowledge of all equipment .This includes terminology of major components, a thorough understanding of equipment mechanics, capability, and limitations. Knows how to inspect for wear and inaccuracy or when
to recommend recalibration.
Has developed advanced written and oral communication skills.
Demonstrates good interpersonal skills in building effective working relationships with customers and coworkers.
Demonstrates a teachable attitude for optimal learning and career growth.
Demonstrates the ability to manage time effectively, prioritize work, analyze and solve problems, and complete paperwork accurately.
Experience working independently under pressure with multiple deadlines.
Performs jobs with an average labor utilization of 92% or higher and with nearly no errors.
MUST be willing to relocate to New Mexico
Job Order Number 5913 ‘CMM Operator’
Employment Type Full Time
Hours per Week: 40
Start Date: asap
Starting Salary Range: DOE
Required Education: High School or Equivalent
Required Experience: 1 +
Position Description
Our company is looking for a CMM Operator in our St. Paul location. The candidate will use a variety of tools and processes to
inspect materials and finished castings to ensure that they meet customer specifications and ISO 9001 requirements
Responsibilities:
Operate a Romer Arm CMM or manual measurement tools to complete casting & tooling dimensional layouts.
Complete PPAP or FAI documents.
Review a sample size of each customer order prior to shipping. Rejects defective parts and marks defect on part or inspection tag.
Review any new tooling or changes to tooling prior to production and complete authorization on Traveler form.
Identify and cut test bars and perform analysis (Micro, Spectro, etc.) as required. Certify materials to customer specifications. Maintain quality department equipment as required.
Take SPC measurements
Qualifications:
High school diploma or GED.
2 years experience in a foundry. One (1) year experience in a quality department and/or related training.
1 year experience operating a CMM (eg. Romer Arm, Faro Arm, Zeiss, Brown & Sharpe)
Prior experience successfully working within an ISO certified facility.
Ability to add, subtract, multiply and divide using whole numbers, common fractions and decimals. Ability to compute rate, ratio, percent and to read and interpret metal rule.
Knowledge of and experience with spreadsheets and word processing software, including Microsoft office products.
Ability to apply commonsense understanding to carry out detailed written or verbal instructions.
Ability to deal with problems involving standardized situation
Working knowledge of SPC’s
Job Order Number 5916 ‘Manufacturing Quality Technician-Advanced’
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 8-5
Start Date: asap
Starting Salary Range: $17/hr
Required Education: Certification or Vocational
Required Experience: 2+
Position Description
Do you have strong analytical skills? Are you a self starter? Work well in a team? Strong interpersonal skills? If so, then read on!
Our company is looking for a Manufacturing Quality Technician to perform all aspects of instrument testing by following detailed test procedures. Candidate qualifies, evaluates and accepts or rejects instrumentation based on testing results for compliance to
specifications and recognizes problems that might affect the quality or integrity of the product and communicates findings. In this
position you should be willing to be attentive to opportunities for continuous improvement and suggest alternatives and solutions to problems and flexible in performing non-routine work or new assignments. Uses initiative and technical skills to diagnose test
failures and/or identify general Test and Manufacturing problems.
Must have:
The ability to follow written instructions, and possess an attention to detail with a high degree of accuracy.
Good written and effective verbal communication skills, while maintaining their motivation and focus on assigned tasks.
Education:
2 year Associates degree in a technical field
2 yrs experience in testing, medical lab and/or operation of medical Instruments or equipment
2 years of experience in a regulated (FDA, ISO13485, or GMP) manufacturing setting
Computer Skills: Experience with Microsoft Word and Excel a minimum.
Job Order Number 5917 ‘Quality Auditor’
Job Location(s): Milwaukee, WI
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 4p-12a
Start Date: asap
Starting Salary Range: $12-15/hr
Required Education: High School or Equivalent
Required Experience: 1+
Position Description
Experienced Process/Product Auditor needed for short term position in great location. If you are a customer-focused individual
who has proven ability to audit processes and products, document and report audit findings to management, and work with
continuous improvement and production work instructions we want to hear from you! Must have experience with interpreting
wiring and assembly drawings as well as Microsoft Office.
Job Order Number 5918 ‘Quality Assurance Inspector’
Job Location(s): Dallas, TX
Employment Term: Regular
Employment Type Full Time
Hours per Week: 40
Work Hours (i.e. shift): 8-5
Start Date: asap
Starting Salary Range: $15-18/hr
Required Education: Certification or Vocational
Required Experience: 5+
Position Description
Our company is looking for a QA Inspector to perform complex inspection of electronic and electro-mechanical assemblies, sub-
assemblies, sheet metal parts, machined parts, components, and or devices to assure conformance to specifications, assembly
practices, and established quality standards for correct manufacturing techniques. Candidate works independently with minimum supervision.
1.) Plans and evaluates the inspection of sheetmetal, machined parts, assemblies, sub-assemblies, components and or devices
including solder joints, wire wrap, cabling, exterior finishes, internal and external dimensions to assure conformance to spec, instructions, and criteria.
2.) Uses engineering drawings, assembly drawings, schematics, and other specifications to assure product conformance. 3) Uses established methods, sequences, and set-ups to visually inspect in- process and completed electronic and electro-
mechanical units.
4.) Uses measuring instruments (digital electronic meters, micometers, calipers, tape measures, height gage, and other standard inspection equipment) to dimensionally inspect sheet metal and machined parts to requirements and visually inspect welded,
soldered joints, and crimped wires to workmanship standard. 5.) Maintain inspection records in ERP database.
6.) Work experience in an ISO 9001 certified manufacturing environment.
Must have a high school diploma or equivalent GED. Formal training such as a two-year college program in quality assurance.
Extensive and diversified electronic and electro-mechanical inspection skills and knowledge. Must have at least five 5 years related
experience in a manufacturing, machine shop environment. Requires an understanding of quality control practices, military specs, standards, and procedures, related manufacturing techniques, and electronics, and ability to read and interpret blueprints,
schematics, engineering drawings, etc. Must be computer literate with Microsoft Office experience with Word Excel Spreadsheet knowledge.
We look forward to meeting you!
Job Order Number 5919 ‘3rd Party Inspector’
Job Location(s): Milan, IL
Employment Term: Regular
Employment Type Full Time
Work Hours (i.e. shift): 8-2
Start Date: asap!
Starting Salary Range: $18-20/hr
Required Education: High School or Equivalent
Required Experience: 5 to 20+ years
Position Description
Great pay and hours!
Fantastic company based in MN is looking for a few 3rd Party Inspectors near Milan IL, to perform visual inspection, and possible repair of parts. Candidates should have 5 + years inspection experience, and be familiar with visual inspection as well as some of
the basic measurement tools.
Use the opportunity to hone your skills for good experience to add to your resume! We are looking to fill this position asap so don’t hesitate to apply now!
We look forward to speaking to you!
Job Order Number 5920 ‘3rd Party Inspector’
location: North of Cleveland, OH
HOT JOB!!
Are you looking for a position that pays well? Someplace you can possibly get your foot in the door? Want to start
tomorrow?? Utilize your skills and pick up a few new ones for your resume. This is a great opportunity!
Our company is looking for a 3rd Party Inspector immediately to join an Inspection team that will be put in place to help
increase level of quality prior to shipment to customer. Apply today and work tomorrow!
Some of the skills necessary are as follows:
+Good working knowledge of geometric dimensioning and tolerancing (GD &T)
+Must be able to utilize a variety of handheld gages -- micrometers, calipers, bore gages, comparators, height stands, etc. . .
+Must be able to perform visual inspection of aerospace products
+Must pass or have a recent eye exam equivalent to Jaeger Type 1 for near vision, and Color vision -- being able to
distinguish and differentiate between colors used during product acceptance.
We are anxiously looking forward to receiving your resume! This will not last long; Qualified candidates are encouraged to
apply now!
Location: North of Cleveland
Compensation: $18-20/hr
Job Order Number 5817 ‘Quality Supervisor’
Employment Term: Regular
Employment Type Full Time
Hours per Week: 30-40
Start Date: asap
Starting Salary Range: $15-16
Required Education: High School or Equivalent
Required Experience: 1+
Position Description
We are excited to be looking for our new Quality Supervisor that will join our team.
Do you have great communication skills, computer literacy and experience using & programming video measuring system (Micro-
Vu)? Are you self-motivated? If so then we are looking for you!
As our Quality Supervisor you will perform inspection 60% of the time, perform internal audits and assist the Quality Manager. We are also looking for someone who is knowledgeable in statistics and PPAPs/AS 9102 as well as experienced with the use of