DATA SHEET MARINE LOADING ARMS Company Contact Address Tel.-No. Fax-No. E-mail Berth Location Date Arm data arm number/ tag No. 1 2 3 4 inlet connection size [inch] rating [lbs] ship‘s end connection size [inch] rating [lbs] drain connection size shore end [inch] ship‘s end [inch] operation manual/hydraulic indicate simultaneously connected arms Accessories required bolted flange or manual coupler or hydraulic coupler vacuum breaker insulation joint nitrogen purge to apex platforms & ladders emergency release system describe other requirements Product data product name operating pressure [psi] design pressure [psi] operating temperature [°F] design temperature [°F] max. flow rate [gal/hr] specific gravity viscosity @ ....... °F [cSt] Site data ambient temperature [°F] design wind speed (max.) [mph] seismic factor (if any) Please fax or mail to EMCO WHEATON or your EMCO WHEATON Representative. |
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
DATA SHEET MARINE LOADING ARMS
Company Contact
Address Tel.-No.
Fax-No.
E-mail
Berth Location Date
Arm dataarm number/ tag No. 1 2 3 4
inlet connection size [inch]
rating [lbs]
ship‘s end connection size [inch]
rating [lbs]
drain connection size shore end [inch]
ship‘s end [inch]
operation manual/hydraulic
indicate simultaneously connected arms
Accessories required bolted �ange or
manual coupler or
hydraulic coupler
vacuum breaker
insulation joint
nitrogen purge to apex
platforms & ladders
emergency release system
describe other requirements
Product dataproduct name
operating pressure [psi]
design pressure [psi]
operating temperature [°F]
design temperature [°F]
max. �ow rate [gal/hr]
speci�c gravity
viscosity @ ....... °F [cSt]
Site dataambient temperature [°F]
design wind speed (max.) [mph]
seismic factor (if any)
Please fax or mail to EMCO WHEATON or your EMCO WHEATON Representative.
|
D
ata
Shee
t m
arin
e lo
adin
g a
rms
USA
07
/06
Data sheet – marine loading arms
minimum maximum
E distance dock face to center line of riser
J distance dock face to berthing line
F distance top of dock to highest high water level (HHWL)
G distance top of dock to lowest low water level (LLWL)
S distance between center lines of risers
Q1 height of �ange above dock or
Q2 depth of �ange below dock
Y inlet �ange size and rating
If there are any berth features which interfere with the function or installation of the arms please supply drawing.
Berth data
minimum maximum
tanker size - Dead Weight Tonnage (DWT)
H height of �ange to water line laden
I height of �ange to water line light
K distance of �ange to ship‘s side
L height of �ange above ship‘s deck
M height of ship‘s rail
P surge fore and aft
R sway
N distance between �anges
X vessel �ange size and rating
Vessel data
EMCO WHEATON USA INC9111 Jackrabbit Road · Houston, Texas 77095 · USA
Whilst the content of this lea�et has been edited with the greatest care, we are not liable for any errors and/or omissions. Subject to change without notice.