p01 Session 9 (I) Ceramic and Concrete Tile Roofs 9.1. Introduction 9.2. Ceramic and concrete tiles 9.3. Construction systems 9.4. Construction details 9.5. Bibliography The California Endowment, L.A. Archs: RCHS + H&R, 2006 Based on the original presentations by Prof. M. Ángeles Beltrán. Adapted by Prof. Julián García [email protected]Translated by Luis M. Martín Vernacular tile roofs at Grazalema. Andalucia, Spain.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
09 (I). Ceramic and Concrete Tile Roofs p01
Session 9 (I)Ceramic and ConcreteTile Roofs
9.1. Introduction9.2. Ceramic and concrete tiles9.3. Construction systems9.4. Construction details9.5. Bibliography
The California Endowment, L.A. Archs: RCHS + H&R, 2006
Based on the original presentations by Prof. M. Ángeles Beltrán. Adapted by
9.1. Introduction. MaterialsCeramic TilesProduced as follows:
· Raw material preparation + Shaping· Drying raw tiles· Glazing· Burning· Sorting
Finishing: raw ceramic or glazedUNE EN 1304Reaction to fire = M0Bending resistance:> = 900 NFrosting: 150 cyclesThermal conductivity: Absorption <5%
Concrete tilesHardened cement mortar.UNE EN 490 (European level)Reaction to fire = M0Bending resistance:> = 2000 NFrosting: + 25 cyclesThermal conductivity: 1.2 Kcal / m ° CAbsorption <10%
09 (I). Ceramic and Concrete Tile Roofs p03
9.2. Ceramic and concrete tiles. International and Spanish standards9.2.1. International standards
Ceramic (left) and concrete international standards. John Wiley and sons. Best Practises Guide to Residential Construction, 2006.
09 (I). Ceramic and Concrete Tile Roofs p04
Vocabulary and details. John Wiley and sons. Best Practises Guide to Residential Construction, 2006.
09 (I). Ceramic and Concrete Tile Roofs p05
Vocabulary and details. John Wiley and sons. Best Practises Guide to Residential Construction, 2006.
09 (I). Ceramic and Concrete Tile Roofs p06
9.2.2. Spanish standards. Ceramics
Arabic tile Mixed (pseudo-s) tile
09 (I). Ceramic and Concrete Tile Roofs p07
Spanish standards. Ceramics
Flat tile Other elements
09 (I). Ceramic and Concrete Tile Roofs p08
Spanish standards. Concrete
Concrete tiles
According to CTE DB HS, the minimum slopes for ceramic and concrete tiles must be:
09 (I). Ceramic and Concrete Tile Roofs p09
Connection systems
· Cement mortars. Cement, lime and sand (1: 2: 10) or waterproof mortar M-2.5. A slope <30 ° is recommended.· Dry installation. Drilling screws and nails, with diameters and lengths that allow its insertion. Screws will be anchored to wooden or metal furring strips.· Adhesives, silicones and foams. Mainly polyurethane foam, used for all concrete and ceramic tiles.
09 (I). Ceramic and Concrete Tile Roofs p010
Superficial supports
· Brickwork slopes. Ceramic brick, cement mortar and a reinforced compression layer.· Concrete. Site slabs or precast elements.· Steel or timber substructures. Covered with several furring strips and metal or fiber- cement board.
Deplazes, A (Ed.) (2009) Constructing Architecture. Materials, processes, structures. Birkhäuser, BaselKnaack, U.; Klein, T. (2009) The Future Envelope 1: A multidisciplinary approach. 2009. Research in Architectural Engineering SeriesKnaack, U.; Klein, T. (2009) The Future Envelope 2: Architecture - Climate – Skin. Research in Architectural Engineering Series Schunk, E. et al. (2003) Roof Construction Manual. Pitched Roofs. Birkhäuser, BaselSchunk, E. et al. (2003) Roof Construction Manual. Flat Roofs. Birkhäuser, Basel
Spanish regulations:· Código Técnico de la Edificación· Normas UNE-EN 10077-1, UNE-EN 12210, UNE-EN 12207, UNE-EN 12208, UNE-EN 12400, UNE-EN 12567-1, UNE-EN 14351-1 y UNE-EN -ISO 140-3