Top Banner
SANG VILLA PROJECT - AL HASA-KSA Daily Hazard Alert Report Legislation: Environmental Standards on Material Recovery and Recycling of Waste 2012. Dated 03/24/2012 Royal Decree No 21 (6/9/1389 H) on Safety in Workplace dated 11/15/1969 Health and safety in Workplace ACT 1974. Occupational Health Services Convention, ILO, 1985 (No. 161) Ref # Tayyab/SANG/ 2014/06 Location (s): General condition of equipment is discussed due to frequent change of work locations within day. Dat e 06-01-2015 General Comments: Abrasive wheel grinders are great machines, but careless operation can injure your hands, fingers, eyes, and respiratory system; further information relates to disk must be printed rather than pasted stickers which not supporting to get information during accident investigation. Sr. No Observation (s) Hazard/Risk Involved Risk Level Corrective Action Person Responsible Time Scale Close out Status 1 1: Multipurpose grinders found without handles. Plate #1 2: Multipurpose grinder found without color- coding system. Plate #4,5,6 3: Abrasive wheels found un qualifying to stipulated duty Loos grip Injury Noise Wheel explosion Eye injury Flying objects Hot surfaces Sharp edges Burn from hot piece of work “Run On” after siting off Earthing bonding wires missing Medium Regular inspection s. Inspection before start each day work TBT Training of workers Color coding implementation Ensure guard is fitted and clumped Don’t use faulty equipment and associated abrasive wheels. Use abrasive disks are compatible to Site Safety In Charge
5

06-01-15-Grinding and Cutting Equipments (2)

Jul 17, 2016

Download

Documents

Saboor Kabier

Grinding Cutting Equipments
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: 06-01-15-Grinding and Cutting Equipments (2)

SANG VILLA PROJECT - AL HASA-KSADaily Hazard Alert Report

Legislation: Environmental Standards on Material Recovery and Recycling of Waste 2012. Dated 03/24/2012 Royal Decree No 21 (6/9/1389 H) on Safety in Workplace dated 11/15/1969 Health and safety in Workplace ACT 1974. Occupational Health Services Convention, ILO, 1985 (No. 161)

Ref# Tayyab/SANG/2014/06

Location (s): General condition of equipment is discussed due to frequent change of work locations within day. Date 06-01-2015

General Comments: Abrasive wheel grinders are great machines, but careless operation can injure your hands, fingers, eyes, and respiratory system; further information relates to disk must be printed rather than pasted stickers which not supporting to get information during accident investigation.

Sr. No Observation (s) Hazard/Risk Involved

Risk Level Corrective Action Person Responsible Time Scale Close out Status

1 1: Multipurpose grinders found without handles.Plate #1

2: Multipurpose grinder found without color-coding system.Plate #4,5,6

3: Abrasive wheels found un qualifying to stipulated dutyPlate#3

4: Chop Saw found without color coding performing in restricted areaPlate# 2

Loos gripInjuryNoiseWheel explosionEye injuryFlying objectsHot surfacesSharp edgesBurn from hot piece of work“Run On” after siting offEarthing bonding wires missing

Medium Regular inspection s.Inspection before start each day workTBTTraining of workersColor coding implementationEnsure guard is fitted and clumpedDon’t use faulty equipment and associated abrasive wheels.Use abrasive disks are compatible to machine in dia and RPM.Don’t use machine without guard.Don’t use wrong type of diskDon’t Apply High pressure during operation.Never leave a machine energized and unattended.Don’t reduce speed of disk on work piece.Allowing machine properly halt before putting on ground.Wear PPE accordingly requirement to operation e.g. Gloves, Safety Glasses, dust

Site Safety In Charge

Page 2: 06-01-15-Grinding and Cutting Equipments (2)

masks, ear plugs.

The hierarchy of controls needs to be considered when identifying control measures. The highest level of control should be implemented where ever reasonably practicable.

Highest Level of Control Lowest Level of Control

Elimination Substitution Engineering Controls Administration Controls Personal Protective E Equipment

Green= LOW Yellow= Medium Red= HIGHType of observation

Unsafe Condition √ Environmental Damage √ Property Loss √Unsafe Act Near Miss/ Incident/ Accident Hygienic Issues

Reminder (s)

Reported by: Mr. Muhammad Tayyab Signature: Area: Development 1Designation: EHS Officer

Page 3: 06-01-15-Grinding and Cutting Equipments (2)

Plate # 1 Plate #2

Plate #3 Plate #4

Page 4: 06-01-15-Grinding and Cutting Equipments (2)

Plate# 5 Plate#6

Plate# 7 Plate#8