052-1HB00-0BA1

So easy.

The Original,that sets the standard

Hundreds of thousands of LOGO!sare already in use: When it comesto switching and control, manysatisfied users all over the worldare already innovative LOGO!customers.

With LOGO!, customers can solvemany of their applications much faster,more conveniently, and above all,more cost-effectively than with con-ventional technology. LOGO! is a com-plete solution, is compact in size, andoffers a wide range of practical func-tions for virtually every single applica-tion.

Save money: One LOGO! instead of a whole array of switching devices!

The multifunctional logic module isan essential component of Siemensmicrosystems, and replaces a wholerange of conventional switchingdevices at comparatively low cost.With LOGO!, you can also utilize inte-grated programming, operator input,and display functions without havingto pay extra for them! Smaller controlcabinets, the need for fewer acces-sories, and lower storage costs in-crease savings even more (as much as50 % of the total cost!). And becauseLOGO! is completely wear-resistant,reliability is optimized and mainte-nance costs kept to a minimum.

Save time: LOGO! equals less wiring

With LOGO! you can save as much as80 % of the time normally required formaintaining uptime from configuringto maintenance because it is no longernecessary to assemble a large numberof different switching elements. Allyou need is one LOGO! Just press afew keys to program the logic moduleand customize your solution instead ofhaving to painstakingly wire each func-tion separately.

Alternatively, you can write and testyour program quickly on your PC andtransfer it to LOGO! via program mod-ule or PC cable, as often as you wish,and always error-free. This reduces thestart-up time for small quantities andreally moves series production intohigh gear. Free sample programs anda constantly growing collection of self-written, reusable programs help saveeven more time.

In addition, LOGO! fits into any controlcabinet or distributor box and is easyto install because it can simply besnapped onto a standard DIN rail.Furthermore, if you have to changesomething later, you don’t have to doany rewiring. All you have to do ispress a button or plug in a programmodule.

Save space: Smaller controlcabinets thanks to LOGO!

LOGO! can save you up to 70% spacein both the control cabinet and in thestockroom, so you can plan right fromthe start to make your cabinets smaller!

With LOGO! you need only four modu-lar spaces to replace the functions ofmany timers, relays, clocks, and con-tactor relays on the DIN rail. For exam-ple, a compressor control system is re-duced to the size of a shoe box. Oryou can install LOGO! as a completecontrol system, with operator keypadand display, and it fits right into themachine frame.

2

The Universal Logic Modulethat saves you money,time, and space

LOGO!

equals less

wiring.

One LOGO!

instead of

a switching

device array.

Smaller

cabinets thanks

to LOGO!

Also, LOGO! proves that you don’thave to sacrifice flexibility. On thecontrary,with 19 integrated functions,LOGO! still has sufficient expansionoptions available to make additionalhardware unnecessary.

LOGO! clears up your stockroom too;because it doesn’t only replace hugenumbers of conventional switchingdevices, which in itself considerablysimplifies ordering and stockkeeping,you also save on accessories such ascable channels, cables, DIN rails,mounting hardware, etc. With stock onhand consisting of only a few LOGO!versions, you are ready for anyapplication, whether in the factory orat the customer’s place of business.

With LOGO! you’re on the safe side

With LOGO!, you’ll realize savingsthroughout your operation.Configuring is reduced, installation andstart-up becomes quick and easy,wiring costs and malfunctions aresignificantly reduced - meaning pro-duction will be faster. Additionally,function block diagrams can simply beduplicated for serial applications orcustomized to suit customer require-ments. Documentation can be createdeasily and quickly at the push of a but-ton or click of a mouse. LOGO! makesa lot of things easier, faster, and morecost-efficient.

Hundreds of thousands of LOGO!sare already in use

You will be astonished at what youcan control and switch with LOGO!The applications that LOGO! cancontrol are virtually limitless!

From domestic and commercialapplications,here are some control examples…• Lighting in appartments, stairwells,

shop windows• Fluorescent lighting circuits• Blinds, sunshades• Heating and ventilation systems• Garage doors• Alarm and bell systems • Whirlpools• Solariums• Irrigation and sprinkler systems

…to industrial applications,here are just a few control examples…• Elevating platforms, lifts• Cable-welding machines• Etching and purifying plants• Industrial saws, planers, bending

machines and cutters• Cutting machines• Strapping machines• Boilers• Heating, cooling, ventilation and

air-conditioning systems• Silo works• Conveyor systems• Level measuring systems• Fractional-horsepower motors,

pumps and valves• Compressors • Energy management systems• Load transfer switches• Access control/parking lot

monitoring systems• Barrier and gate control systems.

LOGO! is suitable for all environ-ments - Even on the high seas!

LOGO! meets the highest require-ments for vibration resistance, electro-magnetic compatibility (EMC), andclimatic conditions, such as humidity.

Obviously this makes LOGO! ideal forindustrial applications.Thanks to theRadio Interference Suppression ClassB rating, it can be used in mixed officeand industrial environments. And sinceLOGO! has all the required approvals,it’s also available throughout theworld. But that’s not all. LOGO! alsoproves its quality in rough sea environ-ments.

The following international shipbuildingapprovals certify this:• American Bureau of Shipping• Bureau Veritas• Det Norske Veritas• Germanischer Lloyd and• Lloyds Register of Shipping.

In order to set a new standard, oldstandards must be left behind.

It’s with good reason that you canexpect from Siemens, the inventorsof the original universal logic module,new versions with even more memorycapacity, more functionality, as well asmore user-friendly handling.

We set the standard - and we willcontinue to do so.

3

In this issue

On page

Wiring? LOGO! solves wiringproblems at the push of a button ............4/5

LOGO!Basic..............................................6/7

LOGO!Long ..............................................8/9

LOGO!Bus................................................10/11

LOGO! Roundup• LOGO!Soft • LOGO!Soft Comfort ............................12

• LOGO!Accessories ..............................13/14

• SIMATIC S7-200SIPLUS additions..................................14

• Microsystems/Microsolutions ..............15

LOGO! at a glance....................................16

New 04/1999

New 01/1999

New 01/1999

New 01/1999

New 04/1999

New 1999

A large number of switching and con-trol applications require unique, cus-tomized solutions. This means that youmust plan, pre-select and purchasethe required components and hard-ware for a particular application.Contactors, timing relays, and clockshave to be purchased, as must the individual components needed forassembly and wiring.

LOGO! makes all of this a lot easier,faster, and more convenient!

Siemens has integrated everythingyou need in the way of tools intoLOGO! - including the functions.LOGO! is not only optimally suited toa wide range of standard applications,but can also accommodate individualcustomer requirements, such asadded convenience and energy savings.

LOGO! makes your work simplerand easier:

1.You describe the task you wantsolved.2.You snap LOGO! onto the DIN railand connect the inputs and outputs.3. Then you select the required func-tions and simply combine them withyour function block diagram by press-ing a key.4. Finally you carry out testing andstart-up.

Changes? In no time at all withLOGO!

LOGO! will considerably reduce thetime and effort involved in carrying outchanges, expansions, and updating! Allyou have to do is combine the inte-grated functions into a new functionblock diagram with the push of a but-ton. In this way, “rewiring” is as sim-ple as can be, and requires no costly,time-consuming replacement or addi-tions to existing hardware.

From circuit diagram to the LOGO!control program

Are you comfortable with traditionalladder logic? If so, the LOGO! functionblock diagram will present no problemwhatsoever. In the function block dia-gram, straightforward symbols repre-sent the individual functions to beused.You simply combine these ready-to-use functions to form your diagram.

A practical example of an OFFdelay:

After switching off switches S1 andS2, the lamp is to remain on foranother 2 minutes.

The figure below shows your previouscircuit diagram:

And this is your new function blockdiagram with LOGO!:

4

Wiring?LOGO! solves wiring problems at the push of a button!

L1

S1 S2

K1T = 2 min

N

qKKL H>1B H M J__N

S1

S2

L1 L1

N qKKL HVbB HYtM J__NT = 2 min

Overview

Program developmentdata interchange PC/moduleStart program

Enter programErase programSet clock

= Cursor „_“ ➔ Move

= Confirm

= Back one step

= Cursor „■“ ➔ Select e.g. off or

Program input(from output to input)

Note

or

Press simultaneously

▼

▼

▼ ▲

➔➔

➔ ➔

ESC OK

▼

▼

▼ ▲

▼

▲

OK

ESC

➔OK ➔ESC

ESCOK

5

The 6 integrated basic functions The 13 integrated special functions

qKKL H &B H M J__N

qKKL H>1B H M J__N

qKKL ? 1B H ß I__N

qKKL H &B H ß J__N

qKKL H>1B H ß J__N

qKKL H=1B H M I__N

AND (und)ReihenschaltungSchließer

OR (oder) ParallelschaltungSchließer

NOT (nicht)Inverter

NAND (und nicht)ParallelschaltungÖffner

NOR (oder nicht)ReihenschaltungÖffner

XOR (exklusiv oder)2fach-Wechsler

Trg

QT

qKKLTrgHotBT HXVMQ

I__N

ON delay

Trg

QR

qKKLTrgHVVBR HouMQ

I__N

Current impulse

qKKLS HRSBR H MQ

I__N

LatchingS

QR

QT

EnqKKL

En H BT HVVMQ

I__N

Clock-pulse generator

TQ

RTrg

T

qKKLTrgHVbBR HXoMQT J__N

RetentiveON delay

qKKLNo1HdgBNo2HhjMQNo3J__N

ClockNo1:

No2:

Sa...SuON:OFF:

SuON:OFF:

12:0020:00

8:0022:00

Sa Su

12

Q

20 20

8 22

20 8 20

12

12

Operatinghours counter

REnRalMi

Mn

OTQ

Par: Mi = 4h

R GKKLEn H hBRalHbsMQParJ__N

Impulse relay/pulse output

TQ

TrgqKKL

TrgHotBT HVbMQ

I__N

Triggerfa = 5Hz fa = 3Hz

G_T

Q1sec 1sec

Fre qKKLFreH/\BParHotMQ

I__NSW = 4HzSW = 3Hz

Year timeswitchMM.D D+

ON: 02.2 5OFF: 04.1 5

25 15

qKKLH B

No H MI__N

MMDD Q

feb mar apr

Q

qKKLEN H BInvH M

I__NPAR

Pulse generatorQInv

state TH

Q

EN

TL TH TL TH TL THTLTH

T

Trg

QR

qKKLTrgHVbBR HYtMQT J__N

OFF delay

R GKKLCntHZcBDirHlmMQParJ__N

Up and downcounters

RCntDirPar

Q

3

1

-1

So easy.

New 01/1999

New 01/1999

ANDseries connection

ORParallel connection ofnormally open contacts

NOTInverter

NAND (and not)Parallel connection ofnormally open contacts

NOR (or not)Series connection ofnormally open contacts

XOR (exclusive or)Double changeovercontact

6

Power supplyterminals

Here is where you connectthe power supply. For everymains voltage, whether12 VDC, 24 VDC, 24 VAC or115 to 230 VAC, there is asuitable LOGO! version.

Digital inputs

Here, you simply connectmaintained-contact switches,momentary-contact switches,sensors, and so on, directly.

Digital outputs

The loads (e.g. lighting,small motors, valves,etc.) are controlled with ahigh switching capacityof 10A.

LC display

When you enter thefunction block diagram,all steps (e.g. logic oper-ations and setpoints), aswell as the integratedready-to-use basic andspecial functions (e.g.those for timers, coun-ters, clocks, and so on),are displayed.During operation, thedisplay includes thestates of inputs and out-puts and (in the case ofthe C versions with inte-grated clock) the day ofthe week and the time.

LOGO!Basic:The all-inclusive logic module

LOGO!Basic – Product Brief

● 4 versions

● Compact dimensions2.84” x 3.54 “ x 2.17” (WxH xD)72 (4 modular spaces) x90x55 mm

● 19 integrated ready-to-usefunctions

● 6 inputs/4 outputs

● Integrated clocks with typically80 hours of reserve power on theLOGO!12RC/24RC/230RC

● Max. 56 functions

● Twelve-month clock

● Asynchronous pulse generator

● Interval time-delay relay

● Trigger

● Integrated retentivity

● 3 operating hours counters

● 2 inputs of 1kHz each on theLOGO!12RC/24

● 4 latches

Module illustrated in original size

Completeness is one of the mostconvincing features of LOGO!.For this reason, the same extensiverange of functions provided on allLOGO!Long versions has also been in-cluded in all versions of LOGO!Basic!This provides you with all the flexibilityyou need. After all, this allows you tocombine the 6 basic and 13 specialfunctions in up to 56 function blocks.In this respect, you do not need toworry about clocks, time relays, coun-ters and contactor relays.

In short, LOGO!Basic has every-thing on-board - in a compactdesign and at a low price!

7

Keypad

You enter your functionblock diagram using the sixoperator buttons. That is tosay, you combine the inte-grated functions quickly andeasily at the push of a but-ton - without any specialknowledge or know-how!Clear? Then press “OK” -and your “wiring” choresare complete.

Interface for programmodule or PC cable

Your function block diagramand the setpoints are alwaysstored in the integratedEEPROM - and are thus safein the event of a power failure!As an option, you can dupli-cate programs generated withLOGO! program modulesquickly and easily, then usethem again for your next appli-cation.

And if you want, you can con-nect LOGO! directly to yourPC via cable. The LOGO!Softprogramming software allowsyou to create function blockdiagrams, conduct simula-tions, tests, archive, docu-ment, and also print.

Technical specifications LOGO!12RC LOGO!24 LOGO!24RC LOGO!230RC

Inputs 6 6 6 6

Input DC 12 V DC 24 V AC/DC 24 V AC 115,voltage 230 V

Permitted range 10.8 V to 20.4 V to 20.4 V to 85 V to15.6 V DC 28.8 V DC 28.8 V DC 265 V AC

20.4 V to26.4 V AC

“0“ signal Max. 4 V DC Max. 5 V DC Max. 5 V AC/DC Max. 40 V AC“1“ signal Min. 8 V DC Min. 15 V DC Min. 15 V AC/DC Min. 79 V AC

Input current 1.5 mA 3.0 mA 5.0 mA 0.24 mA

Outputs 4 relays 4 transistors 4 relays 4 relays

Continuous current 10 A for 0.3 A 10 A for 10 A forresistive resistive resistiveload; load; load;3 A for 3 A for 3 A forinductive inductive inductiveload load load

Short-circuit protection External electronic External Externalfuse (approx. 1 A) fuse fuserequired required required

Switching frequency 2 Hz for 10 Hz 2 Hz for 2 Hz forresistive resistive resistiveload; load; load;0.5 Hz for 0.5 Hz for 0.5 Hz forinductive inductive inductiveload load load

Power dissipation typ. 1 W typ. 0.8 W typ. 1.5 W max. 3 W

Integrated clocks/ 8/typ. 80 h –– 8/typ. 80 h 8/typ. 80 hreserve power

Connecting cables 2 x 1.5 mm2, 1 x 2.5 mm2

Ambient temperature 0 to +55 °C

Storage temperature -40 to + 70 °C

Interference suppression to EN 55011 (Limit Class B)

Protection IP 20

Certification to VDE 0631, IEC 1131, UL, FM, CSA, Ship Building Approvals

Installation on DIN rail 35 mm, 4 modular spaces wide

Dimensions (WxHxD) 2.84˝ x 3.54˝ x 2.17˝ = 72 (4 modular spaces) x 90 x 55 mm

So easy.

New 04/1999New 04/1999

New 04/1999New 04/1999

8

LOGO!Long.Smaller than two LOGO!s –but with twice as manypossibilities

LOGO!Long – Product Brief

● 4 versions● Compact dimensions

4.96” x 3.54” x 2.17” (WxHxD)126 (7 modular spaces) x90x55 mm

● 19 integrated functions● 12 inputs/8 outputs● Integrated with type.

80 hours of reserve poweron the LOGO!230RCL/12RCL/24RCL.

● Max. 56 functions● Twelve-month clock● Asynchronous pulse

generator● Integrated retentivity● 3 operating hours counters● 2 inputs of 1kHz each on the

LOGO!12RCL/24L/24RCL● 4 latches

LOGO!Long doubles your capabilityyet remains compact!

LOGO!Long provides 12 inputs and8 outputs in one unit - twice as manyas the basic LOGO!.Expansion is no longer a problem ifyour application requires more inputsand/or outputs. Furthermore you savespace, because LOGO!Long needsconsiderably less space than twoLOGO!Basics.

LOGO!Long also offers additionalfunctions

There’s almost twice as much mem-ory! It is now possible to combine notonly 30, but 56 functions. Also, Typeidentifier “C” for the integrated clockis now found in all LOGO! versions(exception: LOGO!24/24L).

The function scope has also increased.The LOGO! versions are nowequipped with a twelve-month clockand three five-digit operating hourscounters.New is the “pulse generator” function,which allows you to set differentmark-to-space ratios. Beginning imme-diately, two 1 kHz inputs instead ofonly one are available for acquiringhigh-speed pulses in conjunction withthe integrated trigger function.

The retentivity for counters, operatinghours counters, current rush relaysand latching have also been integrat-ed, effective immediately. And if youwant to protect your program againstcopying, you can use the know-howprotection feature with the optionalprogram module card “Card red”.

Completely new, and with the verysame performance characteristics, theLOGO!12RCL for applications in the12 V range.

Less is sometimes more. This is trueof the new LOGO!Basic, LOGO!Longand LOGO!Bus. Fewer versions withmore functionality provide greaterflexibility for your applications while atthe same time reducing warehousingoverheads.

Module illustrated in original size

9

So easy.

Technical specifications LOGO!12RCL LOGO!24L LOGO!24RCL LOGO!230RCL

Inputs 12 12 12 12

Input/ DC 12 V DC 24 V DC 24 V AC 115,Supply voltage 230 V

Permitted range 10.8 V to 20.4 V to 20.4 V to 85 V to15.6 V DC 28.8 V DC 28.8 V DC 265 V AC

“0“ signal Max. 4 V DC Max. 5 V DC Max. 5 V DC Max. 40 V AC“1“ signal Min. 8 V DC Min. 12 V DC Min. 12 V DC Min. 79 V AC

Input current 1.5 mA 5 mA 5 mA 2 mA

Outputs 8 Relays 8 Transistor 8 Relays 8 Relays

Continuous current Per terminal: 0.3A Per terminal: Per terminal:10 A for 10 A for 10 A forresistive load; resistive load; resistive load;3 A for 3 A for 3 A forinductive load inductive load inductive load

Short-circuit protection External Electronic External Fusefuse (approx. 1 A) fuse requiredrequired required (max. 16 A)(max. 16 A) (max. 16 A)

Switching frequency 2 Hz for 10 Hz 2 Hz for 2 Hz forresistive load; resistive load; resistive load;0.5 Hz for 0.5 Hz for 0.5 Hz forinductive load inductive load inductive load

Power dissipation typ. 1.6 W typ. 1 W typ. 2.9 W typ. 4.5 W

Integrated clocks/ 8/typ. 80h – 8/typ. 80h 8/typ. 80hreserve power

Connecting cable 2 x 1.5 mm2, 1 x 2.5 mm2

Ambient temperature 0 to +55°C

Storage temperature -40 to +70°C

Interference suppression to EN 55011 (Limit Value Class B)

Protection IP 20

Certification to VDE 0631, IEC 1131, UL, FM, CSA, Ship Building approvals

Installation on DIN rail 35 mm, 7 modular spaces wide

Dimensions (W x H x D) 4.96˝ x 3.54˝ x 2.17˝ = 126 (7 modular spaces) x 90 x 55 mm

New 01/1999New 01/1999

New 01/1999New 01/1999

LOGO!Bus:Start communicating!

LOGO! remains easy to handle evenwhen used as an intelligent AS-Inter-face slave because no additional engi-neering effort is involved for commu-nications.

Autonomous when there are busmalfunctions

In their role as an AS-Interface slave,the LOGO!Bus versions serve to ex-change process signals and status orcontrol information in networked sys-tems with high-level controllers likethe SIMATIC S7-200 micro PLC. Here,LOGO!Bus can also be operated on astand-alone basis at any time: if busmalfunctions occur, LOGO! simplycontinues working on its own!

10

LOGO!Bus as an intelligent and autonomousAS-Interface slave

LOGO!Bus – Product Brief

● 2 versions

● Compact dimensions4.96” x 3.54” x 2.17” (WxHxD)126 (7 modular spaces) x90x55 mm

● 19 integrated functions

● 12 inputs/8 outputs

● Integrated clock with type.80 hours reserve power

● Max. 56 functions

● Twelve-month clock

● Asynchronous pulsegenerator

● Integrated retentivity

● 3 operating hours counters

● 2 inputs of 1kHz each on theLOGO!24RCLB11

● 4 latches

Module illustrated in original size

Smooth data interchange throughadditional inputs and outputs

Logical that LOGO!Bus has been opti-mally equipped for these special tasks.It has 12 digital inputs and 8 digitaloutputs and provides an additional4 virtual inputs and 4 virtual outputsfor seamless data exchange on theAS-i bus (actuator-sensor interface).

New application possibilities

The perfect interaction between mas-ter and intelligent slave allows for newapplications in many small distributedcontrol tasks. The AS-i bus makes thispossible. Actuators, for example, maybe signal devices or motors, sensorsmay be switches, pushbuttons, orproximity switches.

Applications

LOGO!Bus offers the full expandedLOGO!Long functionality and alsoenables data interchange on theAS-i bus.

This is important, for example, whendistributed control tasks need to behandled by centralized operator controland monitoring, or if production andconveyor systems are coordinated viaa central controller.

11

Technical specifications LOGO!24RCLB11 LOGO!230RCLB11

Inputs 12 12AS-i inputs 4 4

Input/Supply voltage DC 24 V AC 115, 230 V

Permitted range 20.4 V to 85 V to28.8 V DC 265 V AC

“0“ signal Max. 5V Max. 40V“1“ signal Min. 15 V Min. 79 V

Input current 5 mA 2 mA

Outputs 8 relays 8 relaysAS-i outputs 4 4

Continuous current Per terminal: Per terminal:10 A for resistive load; 10 A for resistive load;3 A for inductive load 3 A for inductive load

Short-circuit protection External fuse External fuserequired required(max. 16 A) (max. 16 A)

Switching frequency 2 Hz for resistive load; 2 Hz bei resistive load;0.5 Hz for 0.5 Hz forinductive load inductive load

Power dissipation typ. 2.9 W typ. 4.5 W

Integrated clocks/ 8/typ. 80h 8/typ. 80hreserve power

Connecting cables 2 x 1.5 mm2, 1 x 2.5 mm2

Ambient temperature 0 to +55°C

Storage temperature -40 to +70°C

Interference suppression to EN 55011 (Limit Value Class B)

Protection IP 20

Certification to VDE 0631, IEC 1131, UL, FM, CSA,Ship Building approvals

Installation on DIN rail 35 mm, 7 modular spaces wide

Dimensions (W x H x D) 4.96˝ x 3.54˝ x 2.17˝ 126 (7 modular spaces) x 90 x 55 mm

So easy.

New 01/1999New 01/1999

12

LOGO! Roundup

LOGO!SoftHelps create and processfunction block diagrams righton the PC

This optional, multi-languageprogramming software runs underWindows, and enables conven-ient creation, testing, simulation,modification, archiving and prin-ting of LOGO! control diagramson the PC - even independentlyof LOGO!

LOGO!Soft ComfortBrings you flexibility anduser-friendliness

With LOGO!Soft Comfort, you cancreate your control programs moreefficiently, more conveniently, andwith greater readability than everbefore. Programs are created via“drag and drop” right on the PC.

Some particularly user-friendly fea-tures are off-line program simulation,status displays for several functionssimultaneously, and an option forextensive documentation of controlprograms. In addition, this optionalCD-ROM-based programming soft-ware provides extensive, detailedon-line help.

The multi-language LOGO!Soft Com-fort executes under Windows 95 ornewer Windows version, has servercapabilities, and offers you freedomand maximum comfort for creatingyour control programs.

New 01/1999

New 04/1999

So easy.

13

LOGO! program modulesLittle helpers for the control program

When it comes to duplication and databackup, you hold all the cards thanks toLOGO! program modules.Use card yellow for quick, easy copyingof control programs.Use card red to keep your control pro-gram from getting into the wrong handsand to prevent your control program frombeing displayed, modified, or duplicated.

LOGO! ManualFor everyone who wants the facts inblack and white

The LOGO! manual contains extensiveinformation on how to operate LOGO! Italso provides detailed descriptions of allintegrated LOGO! functions and, ofcourse, plenty of practical examples. Themanual also contains complete technicalspecifications for all LOGO! versions,information on the AS-Interface, how tocompute memory requirements, andmuch, much more.

LOGO! PC cableThe easiest connection to and fromLOGO!

You can transfer the LOGO! control pro-gram to LOGO! and vice versa simply viathe LOGO! PC cable. Whenever you wantto do so, just connect LOGO! directly toyour PC via cable.

14

LOGO!ContactThe hum-free contactor

With LOGO!Contact you can switchresistive loads up to 20 A and motorsup to 4 kW directly and quietly.LOGO!Contact comes in two versions: LOGO!Contact 24 for 24 VDC andLOGO!Contact 230 for 230 VACswitching voltage.

LOGO!Contact is the ideal solutionfor switching powerful loads in noise-sensitive areas such as hospitals ordomestic environments. It is equallysuitable for numerous industrialapplications.

LOGO!PowerThe perfect power supply

Two LOGO!Power versions for outputcurrents of 24V 1.3 A, 24 V 2.5 A, aswell as for 12 V 1.9 A and 12 V 4.5 A,for all LOGO! 12 VDC and 24 VDCversions. They convert line voltages of120/230 VAC to the relevant operating

voltage. LOGO!Power is ideal forinstallation in control cabinets or wher-ever 12 or 24 V is required for domesticpurposes.

SIMATIC S7-200The micro PLC that is endlesslyversatile yet convincingly simple

When your demands begin to grow,and you want to grow with them,and you need more power,SIMATIC S7-200 is the right choice foryou. The micro PLC from Siemens iscapable of handling more and moreapplications, from simple control appli-cations to complex automation tasks.

The S7-200 is simple to use, has real-time capabilities, and is communica-tive. With these characteristics, theSIMATIC micro PLC family is equallyconvincing to those just entering andthose changing over to the S7-200world.

SIPLUS additionsRefining products to customerspecifications

The large product family of Siemensmicrosystems is constantly conqueringnew applications and areas of exper-tise. Sometimes this includes morerugged environmental conditions. When-ever LOGO! and SIMATIC S7-200 areto be used under extreme conditions,whenever extended

temperature ranges, protection againstcondensation or other voltage valuesare required, the solution is: SIPLUSadditions.

You provide the task, we providethe solution!

New 03/1999

New 03/1999

Under the keyword Microsolutions,Siemens, as a global player, offers youa complete modular system with prod-ucts which are perfectly attuned toone another. From single components,solutions are made - with everythingcoming from a single source and avail-able throughout the world.

Thanks to microsolutions, it is possibleto set up compact distributed controlsolutions based on the “plug andplay” principle. In addition to SIMATICS7-200 and LOGO!, the building-blocksystem contains HMI devices,SIMODRIVE drives, SIRIUS l.v.switchgear, AS-i modules (such as ac-tuators and sensors), and easily inte-

grated components from other manu-facturers.

A microsolution results when actua-tors, operator control equipment or au-tonomous intelligent LOGO! slaves arelinked by a master controller via AS-iI/O components (such as proximityswitches or valves) to form a cost-opti-mized, function-optimized system.

And everything you need is availablefrom a single source. The advantage:from consultation to ordering and fromdelivery to start-up, you will be able toproduce the optimum solution from asingle source provider!

15

With our microsystems, the SIMATICS7-200 micro PLC and the LOGO!universal logic module, we have rede-fined switching and control in the low-end performance range - and by doingso, we have set the global standard.With the microsystems fromSiemens, a new era in electrotechnol-ogy and industrial automation has be-gun!

More and more frequently, innovativeusers are replacing their own electron-ics, PLCs from other manufacturersand centralized control solutions, as

well as contactors, relays and clocks,with more flexible solutions based onour microsystems. And for good rea-son:

Microsystems from Siemens excelthanks to their proverbially easy han-dling and high degree of functionality -and, of course, through further bene-fits of both quality and cost. With ourmicrosystems, you can markedly raisethe quality of your machines andplant, reduce hardware, space and ca-bling overheads, speed up the start-upprocess, and simplify subsequentmodifications.

LOGO! at a glance

Siemens Aktiengesellschaft Order No. E80001-V111-A475-X-7600Printed in Germany41U4193 WS 29960.

Siemens AGAutomation & DrivesP.O. Box 4848D-90327 Nuremberg Subject to change without prior notice 4/97

LOGO!Basic versions

6 inputs, 4 outputs;

4.96˝ x 3.54˝ x 2.17˝= 72 (4 modular spaces) x 90 x 55 mm (WxHxD)

R: Relay outputs, C: Clock

• 12RC 6ED1 052-1BB00-0BA1• 24 6ED1 052-1CA00-0BA1• 24RC 6ED1 052-1HB00-0BA1• 230RC 6ED1 052-1FB00-0BA1

LOGO!Long versions

12 inputs, 8 outputs;

4.96˝ x 3.54˝ x 2.17˝= 126 (7 modular spaces) x 90 x 55 mm (WxHxD)

R: Relay outputs, C: Clock, L: Long

• 12RCL 6ED1 053-1BB00-0BA1• 24L 6ED1 053-1CA00-0BA1• 24RCL 6ED1 053-1HB00-0BA1• 230RCL 6ED1 053-1FB00-0BA1

LOGO!Bus versions

12 inputs, 8 outputs;

4.96˝ x 3.54˝ x 2.17˝= 126 (7 modular spaces) x 90 x 55 mm (WxHxD)

R: Relay outputs, C: Clock, L: Long, B: Bus

• 24RCLB11 6ED1 053-1HH00-0BA1• 230RCLB11 6ED1 053-1FH00-0BA1

LOGO!Accessories (optional)

• Soft 6ED1 058-0AA00-0BA1• Soft Comfort 6ED1 058-0BA00-0YC1• PC Cable 6ED1 057-1AA00-0BA0• Card yellow 6ED1 056-1BA00-0AA0• Card red 6ED1 056-4BA00-0AA0• Manual 6ED1 050-1AA00-0AE1• Contact 24 6ED1 057-4CA00-0AA0• Contact 230 6ED1 057-4EA00-0AA0• Power (12V/1.9A) 6EP1 321-1SH01• Power (12V/4.5A) 6EP1 322-1SH01• Power (24V/1.3A) 6EP1 331-1SH01• Power (24V/2.5A) 6EP1 332-1SH41

LOGO!Starter-Kit

• News-Box 6ED1 057-3AA00-0BA5

LOGO! is available everywhere - even in your area:

At all Siemens distributors, selected electrical equipmentwholesalers, and via catalog/mail order.

Need more information?Contact our Infoservice via post or fax

The following publications are available on request free ofcharge from:

Siemens AG, Infoservice, AD/Z 461,P.O. Box 2348, D-90713 Fürth

Fax: ++49/911/978-3321

/ “GO! Special Edition”, the collected applications of ourcustomers for bright switching and control

/ “SIMATIC S7-200 Microsystems” the new brochurefor the Micro PLC family

/ “SIMATIC S7-200 Success Story”, the application reportson Micro PLCs

/ “SIMATIC Services”, with info on the SIMATIC card foron-line shopping

/ “LOGO!Power 1.3A and 2.5A”, the leaflet for the perfectpower supply

/ “SIPLUS additions”, the info sheet for the use ofequipment under extreme conditions

On the Web - 24 hours on-line

It goes without saying that we are also available to you onthe World Wide Web.You can find the latest information onnews and target dates, products and solutions (such as freesoftware, tips and tricks, applications), go shopping on line,and much more under: www.ad.siemens.de/logo

Great news for everyone starting intothe new dimension of LOGO! microsystems:

The LOGO!News-Box. The complete Starter-Kit containingeverything you need to start saving money, time and space:• LOGO!230RC• LOGO!PC cable• LOGO!Soft version 3.0• LOGO!Manual and microsystems

Tips & Tricks CD-ROMEven better news the LOGO!News-Box packageis available at a very attractive kick-off price.

New 04/1999

New 01/1999

New 01/1999

New 01/1999New 04/1999

New 02/1999New 03/1999

New 06/1999

Product designation Siemens Order No.

New 06/1999