✆ 1300 780 450 79 Bollards Slimline 15 Regal 19 Urban 23 Modern 27 Luxford 33 Traditional 37 Enviro 43 Pre-cast 47 Lighting 55 Power 65 Security 69 Retractable 79 Industrial 91 Card Readers 97 Accessories 102 Product Range > Retractable Advantage Manual Slimline Manual Advantage Semi-automatic Slimline Semi-automatic Advantage Automatic Slimline Automatic Retractable • Vehicular access control through to medium and high security applications • Manual and automatic models • Fast lower-raise operation • Visual deterrent to ramming • Impact tested and rated models Leda stainless steel bollards are normally manufactured from Grade 304. Grade 316 is available if specified. Electro-polishing minimises the possibility of ‘tea staining’ and is recommended for corrosive or saltwater locations.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
✆ 1 3 0 0 7 8 0 4 5 0
79
B o l l a r d s
Slimline 15
Regal 19
Urban 23
Modern 27
Luxford 33
Traditional 37
Enviro 43
Pre-cast 47
Lighting 55
Power 65
Security 69
Retractable 79
Industrial 91
Card Readers 97
Accessories 102
P roduc t Range > Ret ra c t ab le
AdvantageManual Slimline
Manual
AdvantageSemi-automatic
SlimlineSemi-automatic
AdvantageAutomatic
SlimlineAutomatic
Retractable
• Vehicular access control through tomedium and high security applications
• Manual and automatic models
• Fast lower-raise operation
• Visual deterrent to ramming
• Impact tested and rated models
Leda stainless steel bollards are normally manufactured from Grade 304. Grade 316 is available if specified. Electro-polishing minimises the possibility of ‘tea staining’ and is recommended for corrosive or saltwater locations.
✆ 1 3 0 0 7 8 0 4 5 0
80
P roduc t Range > Ret ra c t ab le > F ea tu re s & App l i c a t ions
For over a decade Leda has been recognised as Australia’s market leader in retractable bollards, with a comprehensive range of products catering for vehicular access control and security applications.
Leda Retractable Bollards hold distinct advantages over boom gates and other forms of vehicular access control as they provide much higher impact ratings and are pedestrian friendly.
There are two application-based product lines, each offering a range of diameters in both mild steel (galvanised or electrostatically powder coated) and stainless steel models.
S l im l ine Range
• Medium to high security applications
• Impact tested and rated
• Designed to physically stop vehicles
• Higher visual deterrent to ramming
• Taller, stronger and quicker operation
• Continuity of design with fixed and lighting bollards from the Leda range.Refer Slimline and Lighting sections
• Australian designed and manufactured.
High Security Applications• Government & public buildings
• Hotels & high-profile buildings
• Military installations
• Government utilities and key infrastructure
• Embassies & consulates
High Duty Cycle• Busways
• Shopping centres
• Security checkpoints
Advan tage Range
• Vehicular access control applications
• Economical solution
Access Control Applications• City squares &
pedestrian malls
• Dedicated pedestrian areas & parks
• Car parks
• Business parks
• University campuses
✆ 1 3 0 0 7 8 0 4 5 0
All other vehicles access
Recommended maximum width of 4.0mfor access points, allowing large vehicle access.
RetractableBollards
Fixed Perimeter Bollards
(Traffic Light option)
Fixed orLocking & Removable Bollards (for access by larger vehicles)
Cars only access
Recommended maximum width of 3.0m
RetractableBollards
Fixed Perimeter Bollards
(Traffic Light option)
81
B o l l a r d s
Slimline 15
Regal 19
Urban 23
Modern 27
Luxford 33
Traditional 37
Enviro 43
Pre-cast 47
Lighting 55
Power 65
Security 69
Retractable 79
Industrial 91
Card Readers 97
Accessories 102
P roduc t Range > Ret ra c t ab le > F ea tu re s & App l i c a t ions
Ope ra t i on
Leda offers clients the flexibility of these operation options:
Manual• Economical access control solution for
low-level security applications
• Operates with a lifting handle
Semi Automatic – Gas Strut• Gas strut enables the bollard to rise under
its own stored power, making it ideal where there are weight or OH&S lifting concerns
• Locks using Leda’s unique patented locking system
Automatic – Pneumatic• Pneumatic operation
• Various control and operating options
• Quick raising and lowering speeds
• Reaches full 900mm extension in under 3 seconds
• Designed for continual operation(100% duty cycle)
How many bo l l a rd s?
Leda recommend that active vehicle lanes have a minimum of 2 bollards per lane to assist larger vehicles transiting the area and reduce the possibility of accidental damage. For busy access points, fixed bollards can be fitted with optional traffic lights.
✆ 1 3 0 0 7 8 0 4 5 0
ControlCabinet
RetractableBollards
ControlOverride
Wall MountedCard Reader
Leda’s unique control systemis designed to allow limited operation
during power outages.
SafetyLoop
AccessControl
1.0mMax
Air Compressor& Reservoir
Electronic or PneumaticController
MainsPower
ControlCabinet
RetractableBollards
FixedBollards
ControlOverride
Card ReaderBollards
SafetyLoopAccess
Control
1.0mMax
Air Compressor& Reservoir
Electronic or PneumaticController
MainsPower
82
Power Requ i rement s
Pneumatic models: 240V AC, 10A, or 3-phase 415V.To protect against power outages, high security installations may require connection to an uninterrupted power supply (UPS).
Cont ro l l e r
Programmable Control Board (PCB) or Programmable Logical Controller (PLC), located in the control cabinet, is essential for all functions and allows the flexibility to customise bollard operational requirements to suit each installation. Operation functions can be interfaced with the building management or access control system.
Control Cabinets can be located internally in a secure room or externally in a secure weather-resistant enclosure.
In s t a l l a t i on
Retractable Bollards normally require a 1.6m deep excavation. Security applications may require that the bollards be installed in a continuous concrete strip footing. Leda engineers can assist in the structural design of appropriate footings. For further general information on installation refer to the Installation section.
P roduc t Range > Ret ra c t ab le > Ope ra t ion
Add i t i ona l Op t ions
• Control cabinets – wall / floor mounted
• PE beams – automatic detection
• Traffic lights – for busy access points
• Safety loops – prevent accidental extension. (Override function is recommended for security applications.)
• Access control options- push button (guardhouse)- swipe card (car parks)- remote control (garages)
• Locks – pneumatic bollards
• Sump pumps – for areas with poor drainage. Standard 24V marine pump
Main tenance
Preventative maintenance programs are recommended for all Leda Retractable Bollards.
A suitable program can be tailored to suit the site.
Typ i ca l
Con f i gu ra t i ons
✆ 1 3 0 0 7 8 0 4 5 0
1600mmconcrete perspecification
1600mm minrecommended
excavation
Ø 800 minimumrecommended excavation
1445
Ø50mm minimumconduit
Reinforcement cage(optional)
Drainage hose(to stormwater or sump)
InstallationOption AConcrete
InstallationOption B
Concrete & Rock
500mmconcrete perspecification
1000mmhighly compacted
blue metal /road base
Paving / bitumen finish
83
B o l l a r d s
Slimline 15
Regal 19
Urban 23
Modern 27
Luxford 33
Traditional 37
Enviro 43
Pre-cast 47
Lighting 55
Power 65
Security 69
Retractable 79
Industrial 91
Card Readers 97
Accessories 102
Typ i ca l
In s t a l l a t i on
P roduc t Range > Ret ra c t ab le > Ins t a l l a t ion
Installation of retractable bollards can involve individual or multiple units, and the application may range from access control or high security.
Acces s con t ro l app l i c a t i ons
• For individual installations or where security is not an issue, the easiest method of installing the bollards is through simple excavation using a mechanised posthole auger.
• Bollards can be inserted into the hole, extended and ‘plumbed’ for alignment.
• Steel cage reinforcement is added and the hole back-filled with 30MPa concrete.
Full installation detailsare available from Leda.
Secu r i t y app l i c a t i ons
• For security applications, the footings need to be specified to meet the impact resistance and performance required by the bollards.
• Leda’s engineering division can assist through all phases to ensure that security specifications are complied with.
• Leda’s electrical engineers will also prepare specifications regarding the control, UPS back-up and surge protection for the installation.
Techn i ca l a s s i s t ance
Leda boasts unrivalled service, advice and technical support and can assist in the installation process by:
1. Providing installation manuals and instructions to allow installation by third parties.
2. Project manage the civil works and electrical installation to system commissioning.
3. Carry out complete installation from design to commissioning.
Whatever the option, Leda has the expertise.
✆ 1 3 0 0 7 8 0 4 5 0
Material C250LO steel pipe, steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished
Features • 900mm extension
• Economical manual operation
• Integral lifting handle
• Patented locking system (Bollard locks in raised position)
• Retracts flush with pavement
• Chequer plate (non-slip) lid and surround
80NB88.9mm OD
wall thickness varies
Mild Steel (Galvanised)MRB90 A (4.00mm wall)MRB90 B (5.90mm wall)
Stainless SteelSMRB90 A (3.05mm wall)SMRB90 B (5.49mm wall)SMRB90 C (7.62mm wall)
Material ERW steel linepipe, steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished
Features • 900mm extension
• Gas strut enables bollard to rise under its own stored power
• Patented locking system (Bollard locks in raised position)
• Retracts flush with pavement
• Chequer plate (non-slip) lid and surround
100NB114.3mm OD
wall thickness varies
Mild Steel (Galvanised)MRB100GS A (4.50mm wall)MRB100GS B (6.02mm wall)MRB100GS C (8.56mm wall)
Stainless SteelSMRB100GS A (3.05mm wall)SMRB100GS B (5.49mm wall)SMRB100GS C (7.62mm wall)
200NB219.0mm OD
wall thickness varies
Mild Steel (Galvanised)MRB200GS A (4.80mm wall)MRB200GS B (8.00mm wall)
Stainless SteelSMRB200GS A (3.76mm wall)SMRB200GS B (8.18mm wall)
1
1
1 2
2111
150NB168.3mm OD
wall thickness varies
Mild Steel (Galvanised)MRB150GS A (4.80mm wall)MRB150GS B (7.11mm wall)
MRB150GS C (10.97mm wall)
Stainless SteelSMRB150GS A (3.40mm wall)SMRB150GS B (7.11mm wall)SMRB150GS C (10.49mm wall)
11
2
112
Slimline
Semi Automatic
Drainage pipe
30MPa concretearound outer casing
3
3
Security
85
B o l l a r d s
Slimline 15
Regal 19
Urban 23
Modern 27
Luxford 33
Traditional 37
Enviro 43
Pre-cast 47
Lighting 55
Power 65
Security 69
Retractable 79
Industrial 91
Card Readers 97
Accessories 102
P roduc t Range > Ret ra c t ab le
✆ 1 3 0 0 7 8 0 4 5 0
200NB219.0mm OD
wall thickness varies
Mild Steel (Galvanised)ARB200 A (4.80mm wall)ARB200 B (8.00mm wall)ARB200 C (12.50mm wall)
Stainless SteelSARB200 A (3.76mm wall)SARB200 B (8.18mm wall)SARB200 C (12.70mm wall)
22
3
223
Slimline
Automatic
150NB168.3mm OD
wall thickness varies
Mild Steel (Galvanised)ARB150 A (4.80mm wall)ARB150 B (7.11mm wall)
ARB150 C (10.97mm wall)
Stainless SteelSARB150 A (3.40mm wall)SARB150 B (7.11mm wall)SARB150 C (10.49mm wall)
11
2
112
12
12
Material ERW steel linepipe, steel lid / surround Grade 304 stainless steel pipe, cast stainless steel lid / surroundFinish Galvanised or electrostatically powder coated Linished or electro-polished
Features • 900mm extension
• Pneumatic operation
• Various control options
• High duty cycle (100%)
• Full extension in under 3 seconds
• Retracts flush with pavement
• Chequer plate (non-slip) lid and surround
900
1450
Line of Pavement
Drainage pipe
Optionalreflective tape
30MPa concretearound outer casing
OptionalSuspended Slab
Installation
ARB150 S BARB150 S C
SARB150 S BSARB150 S C
Air Compressors (1 bollard - 6 bollards)Air compressors are determined once air usage can be calculated. This is determined by:1. The number of bollards2. Airline distance3. Frequency of operation.In certain applications, where the compressor cannot be located close enough to the bollards, it may be necessary to install an air reservoir. 3-phase silent compressors are also available as an option.
Typical Top View
367
467
Control CabinetARBCCFor single and multiple bollard operation.PCB Programmable Control Board for basic operationsPLC Programmable Logic Controller for more sophisticated operations
112
SSL150FT A (3.40mm wall) SSL150FT B (7.11mm wall) SSL150FT C (10.97mm wall)
Air Compressors (1 bollard - 10 bollards)Air compressors are determined once air usage can be calculated. This is determined by:1. The number of bollards2. Airline distance3. Frequency of operation.In certain applications, where the compressor cannot be located close enough to the bollards, it may be necessary to install an air reservoir. 3-phase silent compressors are also available as an option.
376
306
150NBTop View
TheEconomical
Option
Up to 10 bollardscan be operated by one PLC controller
Control CabinetTPNCC10(For up to 10 Advantage Bollards – PLC control)
89
B o l l a r d s
Slimline 15
Regal 19
Urban 23
Modern 27
Luxford 33
Traditional 37
Enviro 43
Pre-cast 47
Lighting 55
Power 65
Security 69
Retractable 79
Industrial 91
Card Readers 97
Accessories 102
P roduc t Range > Ret ra c t ab le
✆ 1 3 0 0 7 8 0 4 5 0
Lane MarkerMaterial Galvanised steel housing White plastic post with reflectorsFinish Galvanised / plastic
Features
• Lane control and dileneation –• Automatic pneumatic operation
• Shallow installation
• Flexible and durable upright
• Retracts flush with roadway
Line of Roadway
End View
136
Top View
745nominal
Side ViewFold DownETB75A
230
1056
90
P roduc t Range > Ret ra c t ab le
Re t ra c t ab le Bo l l a rd s
The R igh t Adv i ce
When considering installing retractable bollards, it is advisable to contact your Leda
sales office to ensure the selection of the appropriate product. Experienced Leda staff can assist in helping you through the multiple
operation and technical issues.
Leda design staff will also prepare the necessary working drawing and the recommended operation manuals.
Se r v i ce and Ma in tenance
Retractable bollards and compressors / power packs need to be cleaned and serviced
at recommended intervals (depending on usage) to ensure trouble-free operation. It is extremely important that clean, dry air is
maintained. Leda’s technical staff will assist in developing the correct maintenance program