03 - Romold Product Range Sewerage+Drainage

PRODUCT RANGE 2003SEWAGE + DRAINAGEJanuary 2003

2

INFORMATION FROM THE UNDERGROUNDGENERAL PRODUCT INFORMATION

e x a m p l e :ROMOLD„COMBI“-chamber DN 800,produced out of onepiece only .

ROMOLD COMBI-CHAMBERSmonolithic construction

SEALING RING STRAIGHT INLETROMOLD-PE chamber bases with channel DN150 are delivered with pre-assembled inlet sealin the straight inlet (except bases with bendedchannel, type 1 BB).

THE QUALITY ASSURANCE SYSTEMaccording to ISO 9002 and the usage ofcertified, new materials only, guarantee bestand constant quality of ROMOLD PE-chambers.

CHAMBER ELEMENT SEAL FORROMOLD-PE-„SYSTEM-CHAMBERS“ROMOLD PE-system-chambers correspond tothe known construction of chambers built upout of bases, rings and cones. Highcomponents (e. g. cones from 50 to 150 cm)reduce the number of required parts.

PVC PIPES ACCORDING TO EN 1401,PE-PIPES ACCORDING TO DIN 8074/75,19537 AND PP-PIPES ACCORDING TOEN 1852can be connected directly to ROMOLDchambers. Other pipe systems can beconnected as long as adapters are availablefor the PVC pipe systems.

CERTIFICATE WITH SO-CALLED “Ü-SYMBOL“All ROMOLD manholes possesses both alicense as well as being independentlymonitored.

ADDITIONAL INFORMATION YOU WILLFIND IN THE INTERNET:WWW.ROMOLD.DEor get in contact with us.

ROMOLD CHAMBER-COVERSup to class B are installed directly on thechambers. ROMOLD covers class D conduct thetraffic loads into the ground by using a flange.

class Bclass D

3

LIST OF CONTENTS PAGE

COVERS WITH ACCESSORIES 4CONES, RINGS AND ELEMENT SEALS 5

COMBI-CHAMBERS AND CHAMBER BASES WITH CHANNEL: 6-14CHAMBER-DN 1000: 6-8

CHANNEL DN 150 (bend DN 200/150) 6

CHANNEL DN 250/200 7CHANNEL DN 400/300 8CHANNEL DN 500/450 8

CHAMBER-DN 800: 9-12CHANNEL DN 150 (bend DN 200/150) 9CHANNEL DN 200 (bend DN 200/150) 10

CHANNEL DN 250/200 11CHANNEL DN 400/300 12

CHAMBER-DN 625: 13

CHANNEL DN 150 13CHANNEL DN 250/200 13CHANNEL DN 300 13

CHAMBER-DN 500: 14

CHANNEL DN 150 14CHANNEL DN 250/200 14

COMBI-CHAMBERS AND CHAMBER BASES WITHOUT CHANNEL (for closed pipe systems) 15-16

CHAMBER BASE FOR DOUBLE-PIPE SYSTEMS 16ENERGY-COMPENSATING CHAMBERS FOR MOUNTAIN DRAINAGE 17PUMP CHAMBERS 18-19

CONTROL CHAMBERS FOR PRESSURE PIPE SYSTEMS 19ROAD GULLIES 20ACCESSORIES: 21-23

INLET SEALS 21TOOLS (cup-saws & adapters) 21ADDITIONAL CHANNELS FOR CHAMBER BASES 22

PIPE ADAPTER 22OUTLET SPIGOTS / SPECIAL DIAMETERS 22WELDED PE-SPIGOTS 23

4

CHAMBER COVERS

CHAMBER COVERS DN 625 item weight height

LGH: PE-for green areas:

PE-cover, for green areas, incl. seal and two integrated handles LGH 63 D 6,50 kg 3 cm

LEA: class A, EN:

GG, without ventilation, DIN 1229/EN 124, with ROMOLD-frame LEA 63 G 51,00 kg 4 cm

LAA: class A, ÖNORM (Austria):

GG, without ventilation, ÖNORM B 5110, with ROMOLD-frame LAA 63 G 53,00 kg 4 cm

LDB: class B, DIN/EN:

BEGU, without ventilation, DIN 19596/EN 124, with ROMOLD-frame LDB 63 B 71,00 kg 4 cm

BEGU, with ventilation, DIN 4271/EN 124, with ROMOLD-frame LDB 63 BV 67,00 kg 4 cm

BEGU, watertight, lockable, DIN 1229/EN 124, with ROMOLD-frame LDB 63 BDR 71,00 kg 4 cm

LAB: class B, ÖNORM (Austria):

GG, without ventilation, ÖNORM B 5110, with ROMOLD-frame LAB 63 G 67,00 kg 4 cm

GG, with ventilation, ÖNORM B 5110, with ROMOLD-frame LAB 63 GV 61,00 kg 4 cm

LDD: Klasse D, DIN/EN:

BEGU, without ventilation, DIN 19584/EN 124, with ROMOLD-frame with flange LDD 63 B 189,00 kg 13 cm

BEGU, with ventilation, DIN 19584/EN 124, with ROMOLD-frame with flange LDD 63 BV 189,00 kg 13 cm

GG, watertight, lockable, DIN/EN 124, with ROMOLD-frame with flange LDD 63 GDR 200,00 kg 13 cm

CHAMBER COVERS DN 500 item weight height

LG: for green areas:

PE-cover, for green areas, incl. seal LG 50 D 4,00 kg 2 cm

LEB: class B, EN:

GG, without ventilation, EN 124, with ROMOLD-frame LEB 50 G 35,00 kg 2 cm

LED: class D, EN:

GG, with ventilation, lockable., EN 124, with ROMOLD-frame with flange LED 50 GVLS 80,00 kg 11 cm

GG, watertight, lockable, EN 124, with ROMOLD-frame with flange LED 50 GD 80,00 kg 11 cm

ACCESSORIES item weight

cover for temporary use at the job site, yellow LGH 63 RAL1033 5,00 kgadjustment ring DN 625, height 10-40 cm (seal see „element seal ES 63“, p. 5) E 63/40.10 11,50 kg

5

CONES, RINGS & ELEMENT SEALSCONES DN 1000 & DN 800 AND RINGS DN 1000 - DN 500

CONES DN 1000 item weight height

UE 100.63: LW 625, partly eccentric, with CrNi-steps:

UE 100.63/75 S 33,00 kg 50-75 cm

UE 100.63/100 S 45,00 kg 75-100 cm

UE 100.63/125 S 57,00 kg 100-125 cm

UE 100.63/150 S 67,00 kg 125-150 cm

U 100.63: LW 625, centric, with CrNi-steps:

U 100.63/75 S 33,00 kg 50-75 cm

U 100.63/100 S 45,00 kg 75-100 cm

U 100.63/125 S 57,00 kg 100-125 cm

U 100.63/150 S 67,00 kg 125-150 cm


U 100.80/75 S 34,00 kg 50-75 cm

U 100.80/100 S 45,00 kg 75-100 cm

CONES DN 800 item weight height


U 80.63/75 S 23,00 kg 50-75 cm

U 80.63/100 S 30,00 kg 75-100 cm

U 80.63/125 S 37,50 kg 100-125 cm

U 80.63/150 S 43,00 kg 125-150 cm

RINGS item weight height

E 100: DN 1000, with CrNi-steps:

E 100/50 S 29,00 kg 50 cm

E 100/100 S 51,00 kg 100 cm

E 80: DN 800, with CrNi-steps:

E 80/50 S 20,00 kg 50 cm

E 80/100 S 34,00 kg 100 cm

E 63: DN 625:

E 63/40.8 10,00 kg 10-40 cm

E 63/60.8 12,50 kg 30-60 cm

E 63/90.8 17,50 kg 60-90 cm

E 50: DN 500:

E 50/40 7,00 kg 10-40 cm

E 50/60 10,50 kg 30-60 cm

E 50/90 15,00 kg 60-90 cm

ELEMENT SEALS item weight height

DN 1000, EPDM, according to DIN 4060, for chamber elements DN 1000 ES 100 1,40 kg DN 1000




6

COMBI-CHAMBERS & CHAMBER BASES DN 1000WITH CHANNEL DN 150 (TYPE 1BB: DN 200/150)

COMBI-CHAMBERS DN 1000 WITH CHANNEL DN 150 item weight height

pre-assembled inlet seal DN 150 at the straight inlet

1 BC: straight channel DN 150:

1 BC 100.63.15/110 SBID 46,50 kg 85-110 cm

1 BC 100.63.15/135 SBID 58,00 kg 110-135 cm

1 BC 100.63.15/160 SBID 69,50 kg 135-160 cm

3 BC: straight channel DN 150 with two extra inlets DN 150, 45° right and left, +1/2 D:

3 BC 100.63.15/110 SBID 47,50 kg 85-110 cm

3 BC 100.63.15/135 SBID 59,00 kg 110-135 cm

3 BC 100.63.15/160 SBID 70,50 kg 135-160 cm

BASES DN 1000 WITH CHANNEL DN 150 (1 BB: DN 200/150) item weight height

Type 1 B and 3 B: pre-assembled inlet seal DN 150 at the straight inlet

1 B: straight channel DN 150:

1 B 100.15/60 BID 37,00 kg 60 cm

1 B 100.15/160 SBID 82,00 kg 160 cm

3 B: straight channel DN 150 with two extra inlets DN 150, 45° right and left, +1/2 D:

3 B 100.15/60 BID 38,00 kg 60 cm

3 B 100.15/160 SBID 83,00 kg 160 cm

1 BB: bended channel DN 200/150:

bend right:

90° right 1 BB 100.20.15/65-90° BI 39,00 kg 65 cm

81° right 1 BB 100.20.15/65-99° BI 39,00 kg 65 cm

72° right 1 BB 100.20.15/65-108° BI 39,00 kg 65 cm

63° right 1 BB 100.20.15/65-117° BI 39,00 kg 65 cm

54° right 1 BB 100.20.15/65-126° BI 39,00 kg 65 cm

45° right 1 BB 100.20.15/65-135° BI 39,00 kg 65 cm

36° right 1 BB 100.20.15/65-144° BI 39,00 kg 65 cm

27° right 1 BB 100.20.15/65-153° BI 39,00 kg 65 cm

18° right 1 BB 100.20.15/65-162° BI 39,00 kg 65 cm

9° right 1 BB 100.20.15/65-171° BI 39,00 kg 65 cm

bend left:

9° left 1 BB 100.20.15/65-189° BI 39,00 kg 65 cm

18° left 1 BB 100.20.15/65-198° BI 39,00 kg 65 cm

27° left 1 BB 100.20.15/65-207° BI 39,00 kg 65 cm

36° left 1 BB 100.20.15/65-216° BI 39,00 kg 65 cm

45° left 1 BB 100.20.15/65-225° BI 39,00 kg 65 cm

54° left 1 BB 100.20.15/65-234° BI 39,00 kg 65 cm

63° left 1 BB 100.20.15/65-243° BI 39,00 kg 65 cm

72° left 1 BB 100.20.15/65-252° BI 39,00 kg 65 cm

81° left 1 BB 100.20.15/65-261° BI 39,00 kg 65 cm

90° left 1 BB 100.20.15/65-270° BI 39,00 kg 65 cm

7

COMBI-CHAMBERS & CHAMBER BASES DN 1000WITH CHANNEL DN 250/200

BASES DN 1000 WITH CHANNEL DN 250/200 item weight height

type of base: standard („BI“) extra charge for type „BS“ (plain bottom):

1 B: straight channel DN 250/200:

1 B 100.25.20/65 BI 36,00 kg 65 cm

5 B: straight channel DN 250/200 with four extra inlets DN 250, 45°and 90° right and left, +1/2 D:

5 B 100.25.20/60 BI 40,50 kg 60 cm


bend right:

90° right 1 BB 100.25.20/65-90° BI 39,00 kg 65 cm

81° right 1 BB 100.25.20/65-99° BI 39,00 kg 65 cm

72° right 1 BB 100.25.20/65-108° BI 39,00 kg 65 cm

63° right 1 BB 100.25.20/65-117° BI 39,00 kg 65 cm

54° right 1 BB 100.25.20/65-126° BI 39,00 kg 65 cm

45° right 1 BB 100.25.20/65-135° BI 39,00 kg 65 cm

36° right 1 BB 100.25.20/65-144° BI 39,00 kg 65 cm

27° right 1 BB 100.25.20/65-153° BI 39,00 kg 65 cm

18° right 1 BB 100.25.20/65-162° BI 39,00 kg 65 cm

9° right 1 BB 100.25.20/65-171° BI 39,00 kg 65 cm

bend left:

9° left 1 BB 100.25.20/65-189° BI 39,00 kg 65 cm

18° left 1 BB 100.25.20/65-198° BI 39,00 kg 65 cm

27° left 1 BB 100.25.20/65-207° BI 39,00 kg 65 cm

36° left 1 BB 100.25.20/65-216° BI 39,00 kg 65 cm

45° left 1 BB 100.25.20/65-225° BI 39,00 kg 65 cm

54° left 1 BB 100.25.20/65-234° BI 39,00 kg 65 cm

63° left 1 BB 100.25.20/65-243° BI 39,00 kg 65 cm

72° left 1 BB 100.25.20/65-252° BI 39,00 kg 65 cm

81° left 1 BB 100.25.20/65-261° BI 39,00 kg 65 cm

90° left 1 BB 100.25.20/65-270° BI 39,00 kg 65 cm

COMBI-CHAMBERS DN 1000 WITH CHANNEL DN 250/200item weight height


1 BCE: straight channel DN 250/200, cone partly eccentric:

1 BCE 100.63.25.20/115 SBI 54,00 kg 90-115 cm

5 BC: straight channel DN 250/200 with four extra inlets DN 250, 45°and 90° right and left, +1/2 D, cone partly eccentric:

5 BC 100.63.25.20/115 SBI 55,00 kg 90-115 cm

8




1 B 100.40.30/65 BI 40,50 kg 65 cm


bend right:90° right 1 BB 100.40.30/65-90° BI 42,00 kg 65 cm81° right 1 BB 100.40.30/65-99° BI 42,00 kg 65 cm72° right 1 BB 100.40.30/65-108° BI 42,00 kg 65 cm63° right 1 BB 100.40.30/65-117° BI 42,00 kg 65 cm54° right 1 BB 100.40.30/65-126° BI 42,00 kg 65 cm45° right 1 BB 100.40.30/65-135° BI 42,00 kg 65 cm36° right 1 BB 100.40.30/65-144° BI 42,00 kg 65 cm27° right 1 BB 100.40.30/65-153° BI 42,00 kg 65 cm18° right 1 BB 100.40.30/65-162° BI 42,00 kg 65 cm9° right 1 BB 100.40.30/65-171° BI 42,00 kg 65 cmbend left9° left 1 BB 100.40.30/65-189° BI 42,00 kg 65 cm18° left 1 BB 100.40.30/65-198° BI 42,00 kg 65 cm27° left 1 BB 100.40.30/65-207° BI 42,00 kg 65 cm36° left 1 BB 100.40.30/65-216° BI 42,00 kg 65 cm45° left 1 BB 100.40.30/65-225° BI 42,00 kg 65 cm54° left 1 BB 100.40.30/65-234° BI 42,00 kg 65 cm63° left 1 BB 100.40.30/65-243° BI 42,00 kg 65 cm72° left 1 BB 100.40.30/65-252° BI 42,00 kg 65 cm81° left 1 BB 100.40.30/65-261° BI 42,00 kg 65 cm90° left 1 BB 100.40.30/65-270° BI 42,00 kg 65 cm


in- and outlet with spigot. type of base: standard („BI“)


1 B 100.50.45/80 BIR 56,60 kg 80 cm


bend right:54° right 1 BB 100.50.45/80-126° BIR 58,50 kg 80 cm45° right 1 BB 100.50.45/80-135° BIR 58,50 kg 80 cm36° right 1 BB 100.50.45/80-144° BIR 58,50 kg 80 cm27° right 1 BB 100.50.45/80-153° BIR 58,50 kg 80 cm18° right 1 BB 100.50.45/80-162° BIR 58,50 kg 80 cm9° right 1 BB 100.50.45/80-171° BIR 58,50 kg 80 cmbend left:9° left 1 BB 100.50.45/80-189° BIR 58,50 kg 80 cm18° left 1 BB 100.50.45/80-198° BIR 58,50 kg 80 cm27° left 1 BB 100.50.45/80-207° BIR 58,50 kg 80 cm36° left 1 BB 100.50.45/80-216° BIR 58,50 kg 80 cm45° left 1 BB 100.50.45/80-225° BIR 58,50 kg 80 cm54° left 1 BB 100.50.45/80-234° BIR 58,50 kg 80 cm

CHAMBER BASES DN 1000WITH CHANNEL DN 400/300 & DN 500/450

9

COMBI-CHAMBERS & CHAMBER BASES DN 800WITH CHANNEL DN 150 (TYPE 1 BB: DN 200/150)



1 BC: straight channel DN 150:

1 BC 80.63.15/110 SBID 32,50 kg 85-110 cm1 BC 80.63.15/135 SBID 40,00 kg 110-135 cm1 BC 80.63.15/160 SBID 48,50 kg 135-160 cm1 BC 80.63.15/185 SBID 57,00 kg 160-185 cm1 BC 80.63.15/210 SBID 65,50 kg 185-210 cm

3 BC: straight channel DN 150 with two extra inlets DN 150, 45° right and left, +5 cm:


5 BC: straight channel DN 150 with four extra inlets DN 150, 45° and 90° right and left, +1/2 D cm:



Type 1 B, 3 B and 5 B: pre-assembled inlet seal DN 150 at the straight inlet


1 B 80.15/60 BID 23,00 kg 60 cm1 B 80.15/160 SBID 51,50 kg 160 cm

3 B: straight channel DN 150 with two extra inlets DN 150, 45° right and left, +5 cm:


5 B: straight channel DN 150 with four extra inlets DN 150, 45° and 90° right and left, +1/2 D cm:


1 BB: bended channel DN 200/150:bend right:

90° right 1 BB 80.20.15/65-90° BI 30,00 kg 65 cm

81° right 1 BB 80.20.15/65-99° BI 30,00 kg 65 cm

72° right 1 BB 80.20.15/65-108° BI 30,00 kg 65 cm

63° right 1 BB 80.20.15/65-117° BI 30,00 kg 65 cm

54° right 1 BB 80.20.15/65-126° BI 30,00 kg 65 cm

45° right 1 BB 80.20.15/65-135° BI 30,00 kg 65 cm

36° right 1 BB 80.20.15/65-144° BI 30,00 kg 65 cm

27° right 1 BB 80.20.15/65-153° BI 30,00 kg 65 cm

18° right 1 BB 80.20.15/65-162° BI 30,00 kg 65 cm

9° right 1 BB 80.20.15/65-171° BI 30,00 kg 65 cm

bend left:9° left 1 BB 80.20.15/65-189° BI 30,00 kg 65 cm18° left 1 BB 80.20.15/65-198° BI 30,00 kg 65 cm27° left 1 BB 80.20.15/65-207° BI 30,00 kg 65 cm36° left 1 BB 80.20.15/65-216° BI 30,00 kg 65 cm45° left 1 BB 80.20.15/65-225° BI 30,00 kg 65 cm54° left 1 BB 80.20.15/65-234° BI 30,00 kg 65 cm63° left 1 BB 80.20.15/65-243° BI 30,00 kg 65 cm72° left 1 BB 80.20.15/65-252° BI 30,00 kg 65 cm81° left 1 BB 80.20.15/65-261° BI 30,00 kg 65 cm90° left 1 BB 80.20.15/65-270° BI 30,00 kg 65 cm

10

COMBI-CHAMBERS & CHAMBER BASES DN 800WITH CHANNEL DN 200 (TYPE 1 BB: DN 200/150)


5 BC: straight channel DN 200 with four extra inlets DN 200, 45° and 90° right and left, +1/2 D cm:

5 BC 80.63.20/115 SBI 37,50 kg 90-115 cm

5 BC 80.63.20/140 SBI 44,50 kg 115-140 cm

5 BC 80.63.20/165 SBI 51,50 kg 140-165 cm

5 BC 80.63.20/190 SBI 59,50 kg 165-190 cm

5 BC 80.63.20/215 SBI 68,50 kg 190-215 cm



5 B 80.20/65 BI 25,50 kg 65 cm

5 B 80.20/165 SBI 58,50 kg 165 cm


bend right:

90° right 1 BB 80.20.15/65-90° BI 30,00 kg 65 cm

81° right 1 BB 80.20.15/65-99° BI 30,00 kg 65 cm

72° right 1 BB 80.20.15/65-108° BI 30,00 kg 65 cm

63° right 1 BB 80.20.15/65-117° BI 30,00 kg 65 cm

54° right 1 BB 80.20.15/65-126° BI 30,00 kg 65 cm

45° right 1 BB 80.20.15/65-135° BI 30,00 kg 65 cm

36° right 1 BB 80.20.15/65-144° BI 30,00 kg 65 cm

27° right 1 BB 80.20.15/65-153° BI 30,00 kg 65 cm

18° right 1 BB 80.20.15/65-162° BI 30,00 kg 65 cm

9° right 1 BB 80.20.15/65-171° BI 30,00 kg 65 cm

bend left:

9° left 1 BB 80.20.15/65-189° BI 30,00 kg 65 cm

18° left 1 BB 80.20.15/65-198° BI 30,00 kg 65 cm

27° left 1 BB 80.20.15/65-207° BI 30,00 kg 65 cm

36° left 1 BB 80.20.15/65-216° BI 30,00 kg 65 cm

45° left 1 BB 80.20.15/65-225° BI 30,00 kg 65 cm

54° left 1 BB 80.20.15/65-234° BI 30,00 kg 65 cm

63° left 1 BB 80.20.15/65-243° BI 30,00 kg 65 cm

72° left 1 BB 80.20.15/65-252° BI 30,00 kg 65 cm

81° left 1 BB 80.20.15/65-261° BI 30,00 kg 65 cm

90° left 1 BB 80.20.15/65-270° BI 30,00 kg 65 cm

11

COMBI-CHAMBERS & CHAMBER BASES DN 800WITH CHANNEL DN 250/200


type of base: standard („BI“) extra charge for type „BS“ (1B and 1 BB only):


1 B 80.25.20/65 BI 30,00 kg 65 cm

5 B: straight channel DN 250/200 with four extra inlets DN 200/150, 45° and 90° right and left, +1/2 D cm:

5 B 80.25.20/65 BI 29,00 kg 65 cm


bend right:

90° right 1 BB 80.25.20/65-90° BI 31,00 kg 65 cm

81° right 1 BB 80.25.20/65-99° BI 31,00 kg 65 cm

72° right 1 BB 80.25.20/65-108° BI 31,00 kg 65 cm

63° right 1 BB 80.25.20/65-117° BI 31,00 kg 65 cm

54° right 1 BB 80.25.20/65-126° BI 31,00 kg 65 cm

45° right 1 BB 80.25.20/65-135° BI 31,00 kg 65 cm

36° right 1 BB 80.25.20/65-144° BI 31,00 kg 65 cm

27° right 1 BB 80.25.20/65-153° BI 31,00 kg 65 cm

18° right 1 BB 80.25.20/65-162° BI 31,00 kg 65 cm

9° right 1 BB 80.25.20/65-171° BI 31,00 kg 65 cm

bend left:

9° left 1 BB 80.25.20/65-189° BI 31,00 kg 65 cm

18° left 1 BB 80.25.20/65-198° BI 31,00 kg 65 cm

27° left 1 BB 80.25.20/65-207° BI 31,00 kg 65 cm

36° left 1 BB 80.25.20/65-216° BI 31,00 kg 65 cm

45° left 1 BB 80.25.20/65-225° BI 31,00 kg 65 cm

54° left 1 BB 80.25.20/65-234° BI 31,00 kg 65 cm

63° left 1 BB 80.25.20/65-243° BI 31,00 kg 65 cm

72° left 1 BB 80.25.20/65-252° BI 31,00 kg 65 cm

81° left 1 BB 80.25.20/65-261° BI 31,00 kg 65 cm

90° left 1 BB 80.25.20/65-270° BI 31,00 kg 65 cm

COMBI-CHAMBERS DN 800 WITH CHANNEL DN 250/200 item weight height

type of base: standard („BI“)

1 BC: straight channel DN 250/200:

1 BC 80.63.25.20/115 SBI 38,00 kg 90-115 cm

5 BC: straight channel DN 250/200 with four extra inlets DN 200/150, 45° and 90° right and left, +1/2 D cm:

5 BC 80.63.25.20/115 SBI 39,00 kg 90-115 cm

12

CHAMBER BASES DN 800WITH CHANNEL DN 400/300 (TYPE 5 B: DN 300)

BASES DN 800 WITH CHANNEL DN 400/300 (5 B: DN 300) item weight height



1 B 80.40.30/65 BI 33,50 kg 65 cm

5 B: straight channel DN 300 with four extra inlets DN 200/150, 45° and 90° right and left, +1/2 D cm:This type is not available as „BS“.

5 B 80.30/65 BI 28,50 kg 65 cm

1 BB: bended channel DN 400/300 :

bend right:90° right 1 BB 80.40.30/65-90° BI 35,00 kg 65 cm81° right 1 BB 80.40.30/65-99° BI 35,00 kg 65 cm72° right 1 BB 80.40.30/65-108° BI 35,00 kg 65 cm63° right 1 BB 80.40.30/65-117° BI 35,00 kg 65 cm54° right 1 BB 80.40.30/65-126° BI 35,00 kg 65 cm45° right 1 BB 80.40.30/65-135° BI 35,00 kg 65 cm36° right 1 BB 80.40.30/65-144° BI 35,00 kg 65 cm27° right 1 BB 80.40.30/65-153° BI 35,00 kg 65 cm18° right 1 BB 80.40.30/65-162° BI 35,00 kg 65 cm9° right 1 BB 80.40.30/65-171° BI 35,00 kg 65 cmbend left:9° left 1 BB 80.40.30/65-189° BI 35,00 kg 65 cm18° left 1 BB 80.40.30/65-198° BI 35,00 kg 65 cm27° left 1 BB 80.40.30/65-207° BI 35,00 kg 65 cm36° left 1 BB 80.40.30/65-216° BI 35,00 kg 65 cm45° left 1 BB 80.40.30/65-225° BI 35,00 kg 65 cm54° left 1 BB 80.40.30/65-234° BI 35,00 kg 65 cm63° left 1 BB 80.40.30/65-243° BI 35,00 kg 65 cm72° left 1 BB 80.40.30/65-252° BI 35,00 kg 65 cm81° left 1 BB 80.40.30/65-261° BI 35,00 kg 65 cm90° left 1 BB 80.40.30/65-270° BI 35,00 kg 65 cm

13

COMBI-CHAMBERS DN 625WITH CHANNEL DN 150, DN 250/200 & DN 300



1 B: straight channel DN 150 :

1 B 63.15/90 BID 18,00 kg 60-90 cm

1 B 63.15/120 BID 24,50 kg 90-120 cm

1 B 63.15/150 BID 31,00 kg 120-150 cm

1 B 63.15/180 BID 37,50 kg 150-180 cm

1 B 63.15/210 BID 44,00 kg 180-210 cm


5 B 63.15/90 BID 20,50 kg 60-90 cm

5 B 63.15/120 BID 25,50 kg 90-120 cm

5 B 63.15/150 BID 31,50 kg 120-150 cm

5 B 63.15/180 BID 38,50 kg 150-180 cm

5 B 63.15/210 BID 46,00 kg 180-210 cm

COMBI-CHAMBERS DN 625 WITH CHANNEL DN 250/200 items weight height


1 B 63.25.20/90 BI 21,50 kg 60-90 cm

1 B 63.25.20/120 BI 28,00 kg 90-120 cm

1 B 63.25.20/150 BI 34,50 kg 120-150 cm

1 B 63.25.20/180 BI 41,00 kg 150-180 cm

1 B 63.25.20/210 BI 47,50 kg 180-210 cm

3 B: straight channel DN 250/200 with two extra inlets DN 200/150, 45° right and left, +1/2 D:

3 B 63.25.20/90 BI 22,50 kg 60-90 cm

3 B 63.25.20/120 BI 29,00 kg 90-120 cm

3 B 63.25.20/150 BI 35,50 kg 120-150 cm

3 B 63.25.20/180 BI 42,00 kg 150-180 cm

3 B 63.25.20/210 BI 48,50 kg 180-210 cm



1 B 63.30/90 BI 21,00 kg 60-90 cm

1 B 63.30/120 BI 28,00 kg 90-120 cm

1 B 63.30/150 BI 34,00 kg 120-150 cm

1 B 63.30/180 BI 41,00 kg 150-180 cm

1 B 63.30/210 BI 47,00 kg 180-210 cm

14

COMBI-CHAMBERS DN 500WITH CHANNEL DN 150 & DN 250/200



3 BM: channel straight DN 150 with two extra inlets DN 150, 45°-90° right and left, +1/2 D:

3 BM 50.15/90 BID 16,30 kg 60-90 cm

3 BM 50.15/120 BID 20,50 kg 90-120 cm

3 BM 50.15/150 BID 24,50 kg 120-150 cm

3 BM 50.15/180 BID 29,00 kg 150-180 cm

3 BM 50.15/210 BID 35,00 kg 180-210 cm

COMBI-CHAMBERS DN 500 WITH CHANNEL DN 250/200 item weight height


1 B 50.25.20/90 BI 18,00 kg 60-90 cm

1 B 50.25.20/120 BI 22,00 kg 90-120 cm

1 B 50.25.20/150 BI 28,00 kg 120-150 cm

1 B 50.25.20/180 BI 34,00 kg 150-180 cm

1 B 50.25.20/210 BI 40,00 kg 180-210 cm

15

COMBI-CHAMBERS & BASES WITHOUT CHANNELFOR CLOSED PIPE SYSTEMS, FOR THE INSTALLATION OF CLEANING FITTINGS, ETC. - CHAMBER-DN 1000 & DN 800

COMBI-CHAMBERS DN 1000 WITHOUT CHANNEL item weight height

FCE 100: COMBI-chamber with plain bottom, with pump sump, cone partly eccentric:

FCE 100.63/115 SBS 62,00 kg 90-115 cmFCE 100.63/140 SBS 75,50 kg 115-140 cmFCE 100.63/165 SBS 88,50 kg 140-165 cm

BASE DN 1000 WITHOUT CHANNEL item weight height

F 100: plain bottom without channel, with pump sump:

F 100/115 SBS 72,50 kg 115 cmF 100/165 SBS 95,50 kg 165 cm


FC 80: COMBI-chamber with plain bottom, with pump sump:

FC 80.63/115 SBS 41,50 kg 90-115 cmFC 80.63/140 SBS 49,50 kg 115-140 cmFC 80.63/165 SBS 57,00 kg 140-165 cmFC 80.63/190 SBS 64,50 kg 165-190 cmFC 80.63/215 SBS 72,00 kg 190-215 cm

BASE DN 800 WITHOUT CHANNEL item weight height

F 80: plain bottom without channel, with pump sump:

F 80/165 SBS 63,50 kg 165 cm

16

COMBI-CHAMBERS WITHOUT CHANNEL &BASES FOR PIPE-IN-PIPE SYSTEMS

FOR CLOSED PIPE SYSTEMS, FOR THE INSTALLATION OF CLEANING FITTINGS, ETC. - CHAMBER-DN 625 & DN 500CHAMBER BASE DN 1000 FOR PE-DOUBLE PIPE SYSTEMS


F 63: plain bottom without channel:

F 63/90 BS 19,00 kg 60-90 cmF 63/120 BS 25,50 kg 90-120 cmF 63/150 BS 32,00 kg 120-150 cmF 63/180 BS 38,50 kg 150-180 cmF 63/210 BS 46,00 kg 180-210 cm


F 50: plain bottom without channel:

F 50/90 BS 18,00 kg 60-90 cmF 50/120 BS 22,00 kg 90-120 cmF 50/150 BS 26,00 kg 120-150 cmF 50/180 BS 29,00 kg 150-180 cmF 50/210 BS 33,00 kg 180-210 cm

BASE WITH DOUBLE-WALL DESIGN DN 1000 item weight height

FBD 100: Base for pipe-in-pipe systems:

FBD 100/60 BS 70,00 kg 60 cm

Accessories (2 pieces /chamber required):connection for pressure test 1.1/4“, IG, brass FBD-DA 50control opening DN 100 FBD-PE 100spigot for protection pipe, max. DN 400 (2 pieces / chamber required) see „spigot RSG“ page 23inlet seal for medium pipe DN 150 - DN 300 (2 pieces / chamber required) see „inlet seals“ page 21

17

ENERGY COMPENSATING CHAMBERS FOR MOUNTAIN DRAINAGE, CHAMBERS-DN 1000, DN 800 & DN 625

ENERGY COMPENSATING CHAMBERS DN 1000 item weight height

max. pipe diameter: DN 500

RB 100: round bottom:

without steps (plain surface at the inside), height 70 cm RB 100/70 33,50 kg 70 cmwithout steps (plain surface at the inside), height 100 cm RB 100/100 42,00 kg 100 cmwith CrNi steps, height 100 cm RB 100/100 S 45,00 kg 100 cm




without steps (plain surface at the inside), height 65 cm RB 80/65 18,50 kg 65 cm




without steps (plain surface at the inside), height 90 cm RB 63/90 17,00 kg 90 cm

ACCESSORIES item

chamber rings and cones see page 5spigot at the inlet see „RST“ page 23spigot at the outlet see „RSR“ page 23

18

PUMP CHAMBERSDN 900 FIXED HEIGHT & DN 800

PUMP CHAMBER DN 900 - FOR SUSPENDED PUMPS item weight height

PC 90: for one or two suspended pumps:

PC 90/175 BS 59,00 kg 175 cm

PUMP-SYSTEM CHAMBER DN 800 - FOR 1 PUMP item weight height

RB 80/65 BI & UP 80.63/150: for one suspended pump:

pump-chamber base, height 65 cm RB 80/65 BI 20,30 kg 65 cm

cone for the installation of traverse, height 150 cm UP 80.63/150 43,00 kg 150 cm

traverse GG PCB 90 G 10,20 kg

chamber rings see page 5

element seals see page 5

inlet seals see page 21

PUMP-SYSTEM CHAMBER DN 800 - FOR 2 PUMPS item weight height

F 80/65 BS & UP 80.63/150: for two suspended pumps:

pump-chamber base, height 65 cm F 80/65 BS 34,00 kg 65 cm

cone for the installation of traverse, height 150 cm UP 80.63/150 43,00 kg 150 cm

traverse GG PCB 90 G 10,20 kg

chamber rings see page 5

element seals see page 5

inlet seals see page 21

19

PUMP CHAMBERS & CONTROL CHAMBERSPUMP CHAMBERS DN 1000 & DN 625 WITH VARIABLE HEIGHT, FOR STANDING PUMPS,

CONTROL CHAMBERS FOR PRESSURE PIPELINES

PUMP-SYSTEM CHAMBER DN 1000 - FOR STANDING PUMPS item weight height

FP 100: pump chamber base with plain bottom and rubber support for the pump against vibrations:

FP 100/140 SBSA 93,00 kg 140 cm

supporting frame for one pump FP-R 100/1supporting frame for two pumps FP-R 100/2inlet seals see page 21

PUMP-COMBI-CHAMBERS DN 625 - FOR 1 PUMP

see: „COMBI-chambers DN 625 without channel“ at page 16

CONTROL CHAMBERS FOR PRESSURE PIPELINES

see: „bases and COMBI chambers DN 1000 & DN 800“ at page 15

20

DRAINAGEROAD GULLIES DN 400 & DN 300

ROAD GULLIES DN 400 - for public traffic areas item weight height

GR 40.50.30.15: for covers 300 x 500 mm and concrete ring 10 b according to DIN 4052:

road gully with straight outlet GR 40.50.30.15/45 BI 9,00 kg 35-45 cm

road gully with outlet 45° right GR 40.50.30.15/45-135° BI 9,00 kg 35-45 cm

road gully with outlet 45° left GR 40.50.30.15/45-225° BI 9,00 kg 35-45 cm

cover cl. C 250 or D 400 together with concrete ring 10 b according to DIN 4052 to be provided by the customer

GR 40.50.50.15: for covers 500 x 500 mm and concrete ring 10 a according to DIN 4052:

road gully with straight outlet GR 40.50.50.15/45 BI 10,00 kg 35-45 cm

cover cl. C 250 or D 400 together with concrete ring 10 a according to DIN 4052 to be provided by the customer

ROAD GULLIES DN 300 - with siphon and separator function item weight height

LEC: cover DN 300 (300 x 300 mm), class C:

LEC 31 GR 22,30 kg 5 cm

GS 31.10 P: road gully with branch for camera travel, outlet spigot DN 100:

GS 31.10/73 P 9,50 kg 73 cm

GS 31.10/151 P 18,50 kg 151 cm

GS 31.12 P: road gully with branch for camera travel, outlet spigot DN 125:

GS 31.12/73 P 8,50 kg 73 cm

GS 31.12 N: road gully without branch for camera travel, outlet spigot DN 125:

GS 31.12/73 N 8,50 kg 73 cm

21

INLET SEALS, CUP SAWS & ACCESSORIES

INLET SEALS item weight pipe DN

IS: inlet seal according to DIN 4060, material SBR, for PVC-KG pipes according to EN 1401, PE-pipes according to DIN 8074/75, 19537and PP-pipes according to EN 1852:

for pipe OD 32 mm IS 32 0,01 kg

for pipe OD 40 mm IS 40 0,02 kgfor pipe OD 50 mm IS 50 0,05 kg

for pipe OD 63 mm IS 63 0,06 kgfor pipe OD 75 mm IS 75 0,07 kg

for pipe OD 90 mm IS 90 0,08 kgfor pipe OD 110 mm IS 110 0,16 kg DN 100

for pipe OD 125 mm IS 125 0,17 kg DN 125for pipe OD 140 mm IS 140 0,22 kg

for pipe OD 160 mm IS 160 0,23 kg DN 150for pipe OD 180 mm IS 180 0,29 kg

for pipe OD 200 mm IS 200 0,32 kg DN 200for pipe OD 225 mm IS 225 0,36 kgfor pipe OD 250 mm IS 250 0,38 kg DN 250

for pipe OD 315 mm IS 315 0,42 kg DN 300

for pipe OD 400 mm IS 400 0,64 kg DN 400

CUP SAW & ADAPTER item weight pipe DN

CS: cup saw for inlet seal:

cup saw for inlet seal OD 32 mm (IS 32) CS 32 0,07 kg

cup saw for inlet seal OD 40 mm (IS 40) CS 40 0,10 kgcup saw for inlet seal OD 50 mm (IS 50) CS 50 0,12 kg

cup saw for inlet seal OD 63 mm (IS 63) CS 63 0,15 kgcup saw for inlet seal OD 75 mm (IS 75) CS 75 0,17 kg

cup saw for inlet seal OD 90 mm (IS 90) CS 90 0,26 kgcup saw for inlet seal OD 110 mm (IS 110) CS 110 0,38 kg DN 100

cup saw for inlet seal OD 125 mm (IS 125) CS 125 0,46 kg DN 125cup saw for inlet seal OD 140 mm (IS 140) CS 140 0,54 kg

cup saw for inlet seal OD 160 mm (IS 160) CS 160 0,70 kg DN 150cup saw for inlet seal OD 180 mm (IS 180) CS 180 0,88 kg

cup saw for inlet seal OD 200 mm (IS 200) CS 200 1,06 kg DN 200cup saw for inlet seal OD 225 mm (IS 225) CS 225 1,36 kgcup saw for inlet seal OD 250 mm (IS 250) CS 250 1,66 kg DN 250

cup saw for inlet seal OD 315 mm (IS 315) CS 315 2,52 kg DN 300

cup saw for inlet seal OD 400 mm (IS 400) CS 400 3,54 kg DN 400

CSA: adapter:

adapter, for all cup saws CSA2 0,25 kg

22

ADDITIONAL CHANNELS & PIPE ADAPTER

ADDITIONAL CHANNEL FOR CHAMBER BASE item weight pipe DN

GZ: incl. welding work:

channel DN 150 (OD =160 mm) GZ 160 DN 150

channel DN 250 (OD =250 mm) GZ 250 DN 250channel DN 300 (OD =315 mm) GZ 315 DN 315

channel DN 400 (OD =400 mm) GZ 400 DN 400

OUTLET SPIGOT FOR SPECIAL DIAMETER item weight pipe OD

SPR: welded to the standard outlet

OD 180 mm, to chamber channel DN 150, PN 6 & PN 10 SPR 180/160.13 A 2,30 kg OD 180

OD 180 mm, to chamber channel DN 200, PN 6 SPR 200/180.11 A 2,50 kg OD 180OD 225 mm, to chamber channel DN 250, PN 6 SPR 250/225.13 A 3,50 kg OD 225

OD 280 mm, to chamber channel DN 250, PN 6 SPR 280/250.16 A 3,50 kg OD 280

OD 355 mm, to chamber channel DN 400, PN 6 SPR 400/355.15 A 8,00 kg OD 355

23

PE-SPIGOTSWELDED TO ROMOLD PE-CHAMBERS

WELDED PE-SPIGOT item pipe DN pipe OD

RSG: straight:

straight PE spigot, OD=110 mm (DN 100), L=30 cm RSG 110/30 100 110 mm


straight PE spigot, OD=140 mm, L=30 cm RSG 140/30 140 mm









RSS: with slope:

PE spigot with slope, OD=110 mm (DN 100), L=30 cm RSS 110/30 100 110 mm


PE spigot with slope, OD=140 mm, L=30 cm RSS 140/30 140 mm









RST: tangential:

tangential PE spigot, OD=110 mm (DN 100), L=80 cm RST 110/80 100 110 mm


tangential PE spigot, OD=140 mm, L=80 cm RST 140/80 140 mm









RSR: outlet at round bottom:

PE spigot at round bottom, OD=110 mm (DN 100), L=80 cm RSR 110/80 100 110 mm


PE spigot at round bottom, OD=140 mm, L=80 cm RSR 140/80 140 mm









Ände

rung

en in

Tec

hnik

und

Aus

stat

tung

sow

ie Ir

rtüm

er v

orbe

halte

n. A

lle P

reis

e in

E z

zgl.

gülti

ger M

wSt

. Es

gelte

n un

sere

allg

emei

nen

Ges

chäf

tsbe

ding

unge

n

E

E-PL

DE/

A T R

omol

d/Eb

ner 0

201

Axxx

x 02

01

DEUTSCHLANDROMOLD GmbHGörlitzer Straße 12D-83395 FreilassingTelefon: ++49-8654-4768-0Telefax: ++49-8654-476847e-mail: [email protected]: www.romold.de

WWW.ROMOLD.DE

03 - Romold Product Range Sewerage+Drainage

Documents