0205-05_bunkering_hoses

CONTENT

INDUSTRIAL HOSES

AQUATIC INDUSTRIA 10Water Hoses

1 0AUQUATIC INDUSTRIA 20 1 0AQUATIC 5 SP 10AQUATIC 10 SP 1 1AQUATIC 10 1 1AQUATIC FECAL 10 1 1AQUATIC GLASS 12AQUATIC GLASS EXTREME 10G 1 2AQUATIC GLASS EXTREME 10GAS 1 2SUPERFLEX FECAL 1 3SUPERFLEX FECAL SUPER 1 3SUPERFLEX FLAME 1 3SUPERFLEX FLAME CLEAR 1 4SUPERFLEX PVC 14WHIRPOOL PVC 1 4

AGRO 20Agriculture Hoses

1 5AGRO 40 1 5AGRO 80 1 5AGRO M 1 6AGRO L 1 6AIR ACTIV PU 1 6

AIR ACTIV 10Air and Multipurpose Hoses

1 7AIR ACTIV 20 1 7AIR ARIACORD 10 17AIR ARIACORD 20 1 8AIR ARIACORD 40 1 8AIR MINING 40 1 8HORIZON 200 19HORIZON 250 1 9HORIZON 300 1 9ORTAC 250 2 0ORTAC 300 2 0ORTAC 400 2 0GORILLA 2 1

NEPTUNE 1500High pressure washer Hoses

2 2NEPTUNE 3000 2 2NEPTUNE 4500 2 2

PYROFLEX® II HOT AIRHot air Hoses

2 3PLICORD® TORRIDAIR™ HOT AIR BLOWER 23ARIACORD HOT AIR 160 HASCE 2 3ARIACORD HOT AIR 160 HADE 2 4

CALORCORD WALL 10 Steam / Hot water Hoses

2 5CALORCORD SLIM 10 2 5RADIACORD FREEZ 2 5CALOR STEAM 150 2 6CALOR STEAM 165 2 6CALOR STEAM 165 / NETWASH 10 2 6CALOR STEAM 165 / NETWASH 20 2 7CALOR STEAM 210 2 7CALOR STEAM 230 2 7

DRINKFOOD ABRA 7Food Quality Hoses

2 8DRINKFOOD ABRA 7 SP 2 8DRINKFOOD NBR 10 2 8DRINKFOOD NBR 10 SP 29DRINKFOOD NR 10 2 9DRINKFOOD NR 10 SP 2 9GRAY FLEXTRA® LT 3 0HARVEST™ 3 0TAN FLEXTRA® 3 0DRINKFOOD CLEAR A 3 1DRINKFOOD CLEAR 3 1DRINKFOOD CLEAR PR 3 1DRINKFOOD PU 3 2DRINKFOOD PVC 32DRINKFOOD RED 3 2CRISTAL FOOD SP 3 3CRISTAL FOOD 3

ABRASPIR CEMENTO 10 SP

3

Abrasion Resistant Hoses 3 4

ABRASPIR SILOFLEX 8 SP 34ABRASPIR SILO SD 7 3 4ABRASPIR MINING 10 3 5SAND TURBOCORD 10 3 5SAND TURBOCORD 10 ECO 3 5ABRASPIR PLASTER 40 3 6ABRASPIR CLC HARD 3 6ABRASPIR CLC ECO 3 6FLEXTRA® DRY MATERIAL 3 7BLUCOR 3 7PØÍRUBY PRO HADICI BLUCOR 3 7STREETCLEANER HARD 3 8STREETCLEANER 38STREETCLEANER FLEXI PU 3 8

CHEMIVAC EPDM Chemical Transfer Hoses

3 9CHEMIVAC EPDM 10 SP 3 9CHEMIVAC XLPE 10 SP 3 9CHEMIVAC XLPE 16 4 0CHEMIVAC XLPE 16 SP 4 0CHEMIVAC UPEL 16 SP 4 0VIPER™ 4 1FABCHEM™ 4 1HI-PER® 4 1BLUE FLEXWING® SPECLAR™ (XLPE) 4 2RAKCHEM EGE 7 bar /10 bar / 14 bar (Polypropylen) 43RAKCHEM EEE 10 bar (Polypropylen) 4 3RAKCHEM SSE 10 bar (Polypropylen) 4 4RAKCHEM SST 7 bar /10 bar (PTFE) 4 4

PETROFLEX CARBOIL 10Petrochemical Hoses

4 5PETROFLEX FUEL 10 ECO 4 5PETROFLEX 10 EN 12115 4 5PETROFLEX 16 EN 12115 4 6PETROFLEX 10 SP 4 6PETROFLEX 10 SP EN 12115 4 6PETROFLEX 16 SP 4 7PETROFLEX PVC 4 7PETROFLEX CRISTAL 4 7PLICORD® LW BLACK FLEXTRA II™ 4 8RED FLEXTRA® 7 4 8RED FLEXTRA® 10 4 8RAKPETROL 8 4 9 KANAFLEX - KANAPOWER ST 120 LT 4 9PALADIN 49JET RANGER™ 5 0WINCRAFT 5 0FLEXSTEEL® HARDWALL 5 0FLEXSTEEL® VAPOR ASSIST 5 1PYROFLEX® HOT TAR & ASPHALT 5 2PYROFLEX® HOT TAR WAND 5 2REDPOINT BITUMEN 220 5 2RAKOIL GGE 7/10 bar/14 bar (Polypropylen) 53RAKOIL GGR 10 bar (Polyamid) 5 3

Hydraulická hadice DUNLOP 1 SN Hydraulic Hoses

5 4Hydraulická hadice DUNLOP 2 SN 5 4Hydraulická hadice DUNLOP 4 SP/SN 5 4Hydraulická hadice 1 SN 5 5Hydraulická hadice 2 SN 5 5Hydraulická hadice 4 SP 5 5

3

SUCTION HOSES

CLIMA AIRAir - dust

5 8CLIMA S1 5 8CLIMA S1 ANTISTATIK 5 8CLIMA S2 5 9CLIMA CRISTAL S1 5 9CLIMA CRISTAL S2 5 9

CLIMA CLEARAir - dust and hot gases

6 0CLIMA TERMO 6 0CLIMA TPR 6 0

CLIMA TPR SP6Hot gases

6 1VENTIDUST ABGAS/TPE 6 1VENTIDUST ABGAS/TPS 6 1

VENTIDUST PUR S Abrasive materials

6 2VENTIDUST PUR M 6 2VENTIDUST PUR H 6 2FLEXA PUR 5 6 3FLEXA PUR 7 6 3FLEXA PUR S 6 4FLEXA PUR M 6 4FLEXA PUR H 6 4FLEXA PUR ROBUST 6 5FLEXA PUR ROBUST EXTRA 6 5FLEXA PUR HEAVY 6 5

VENTIDUST UNI V2High temperatures

6 6VENTIDUST UNI VITON 6 6VENTIDUST UNI V9 6 6

CLIMA LUX - SUPERLASTIC blackAir - dust and heating

6 7CLIMA HEATING - SPIRAFLEX P/L 6 7CLIMA HEATING TR 300 6 7

CLIPFLEX PE 85°CHigh temperatures and chemical fumes

6 8CLIPFLEX HYPALON 175°C 6 8CLIPFLEX VITON 210°C 6 8CLIPFLEX PTFE 250°C 6 9CLIPFLEX SILIKON 300°C 6 9 CLIPFLEX HIGH-TEMP 6 9

VINFLEX NEREZAbrasive materials and hot air

7 0VINFLEX POZINK 7 0VINFLEX NEREZ ECO 7 0

HOSE COUPLINGS

STORZ hose couplingSTORZ Couplings

7 2STORZ - female thread 7 2STORZ – female thread, swivel 72STORZ - male thread 7 3STORZ - male thread, swivel 7 3STORZ - gasket 7 3STORZ – dustcap 7 3STORZ WITH FLANGE 7 4STORZ REDUCTION 7 4FEMALE THREADED FLANGE - PN 16 7 4MALE THREADED FLANGE - PN 16 7 4

TANKWAGEN EN 14420-6 (DIN 28450) VK TW TANKWAGEN Couplings EN14420-6 (DIN 28450)

7 5 TANKWAGEN EN 14420-6 (DIN 28450) MK 7 5TANKWAGEN EN 14420-6 (DIN 28450) VB 7 5TANKWAGEN EN 14420-6 (DIN 28450) MB 7 5TANKWAGEN GA – male hose couplings 7 6TANKWAGEN GI - female hose couplings 7 6TANKWAGEN EN14420-6 (DIN 28450) lip seal 7 6TANKWAGEN EN14420-6 (DIN 28450) fat seal 7 6TW EN14420-3 (DIN 2817) Safety Clamp 7 7RUBBER EXPANSION JOINT NBR DIN / TW3 7 7REDUCING NIPPLES MALE X FEMALE – G, BSP acc. DIN ISO 228 7 7REDUCING NIPPLES MALE X MALE – G, BSP acc. DIN ISO 228 7 8DOUBLE NIPPLES MALE X MALE – G, BSP acc. DIN ISO 228 7 8

RAKLOK TYPE ARAKLOK Couplings

7 9RAKLOK TYPE B 8 0RAKLOK TYPE C 8 1RAKLOK TYPE D 8 2RAKLOK TYPE E 8 3RAKLOK TYPE F 8 4RAKLOK TYPE DC 8 5RAKLOK TYPE DP 8 6RAKLOK TYPE DIN AU 8 7RAKLOK TYPE DIN CU – for assembly with Safety Clamp 8 7RAKLOK TYPE DIN EU - for assembly with Safety Clamp 8 7RAKLOK TYPE DIN DU with thread seal 8 8RAKLOK TYPE SW A - for welding 8 8RAKLOK TYPE SW D - for welding 8 8RAKLOK TYPE SW B - for welding 8 9RAKLOK TYPE SW F - for welding 8 9GASKET - for RAKLOK couplings 8 9THREAD seal for RAKLOK couplings 9 0RAKLOK HANDLE 9 1RAKLOK RING 9 1RAKLOK CHAIN 9 1RAKLOK PIN 9 1

GUILLEMIN - hose tail with locking ringGUILLEMIN Couplings

9 2GUILLEMIN - female thread with locking ring 9 2GUILLEMIN - male thread with locking ring 9 3GUILLEMIN - female thread without locking ring 9 3GUILLEMIN - male thread without locking ring 9 3GUILLEMIN DUSTCAP – with locking ring 9 3GUILLEMIN Handled plug without locking ring 9 4GUILLEMIN REDUCTION 9 4GUILLEMIN Gasket 9 4 Pharmaceutical and petrochemical industries

TODO - MATIC® - Dry Break Couplings

9 5Tank Unit threaded 9 5Hose Unit threaded 9 5ACCESSORIES 9 5TODO - GAS® LPG industries 9 6Tank Unit threaded 9 6Hose Unit threaded 9 6ACCESSORIES 9 6API COUPLINGS (API R.P. 1004) for bottom loading 9 6API Adaptor - automatic 9 6API Adaptor with handle - mechanical 9 6API coupler with handle - mechanical 9 6DUSTCAP - API 9

CONTENT

7

DUSTCAP - API 9 7AIR INTERLOCK VALVE 9 7

WORM DRIVE CLAMP W 1Hose Clamps

9 8WORM DRIVE CLAMP W 4 9 8SUPERIOR CLAMP W 1 9 8SUPERIOR CLAMP W 4 9 8HOSE CLAMP HERKULES 9 9HOSE CLAMP 9 9HOSE CLAMP DIN 20039 A 9 9HOSE CLAMP DIN 20039 B 9 9TW Safety clamps EN14420-3 (DIN2817) 9 9

COUPLER – Male threadStandard Quick Disconnect Couplings DN 7,2

100COUPLER – Female thread 100COUPLER – with hose tail 100COUPLING – with squeeze nut and spring guard 100PLUG – Male thread 100PLUG – Female thread 100PLUG – with hose tail 101PLUG – with squeeze nut and spring guard 101MULTI WAY Connector 3x female thread 101MULTI WAY Connector 4x female thread 101Male threaded hose tail 101

GEKA - hose coupling GEKA Couplings

102GEKA – female thread 102GEKA – male thread 102GEKA – dust cap 102GEKA – gasket 102

CHECK VALVE – with female threadCheck Valves

103FOOT VALVE – inlet with strainer – outlet female thread 103

Spray nozzle with hose tailGeka Heavy Type Spray Nozzles

103Spray nozzle with GEKA coupling bayonet 103

EA COUPLING - with hose tail Universal Hose Couplings

104EA COUPLING - with hose tail and safety collar 104EA COUPLING – female thread 104EA DUSTCAP 104EA COUPLING – male thread 104EA GASKET 104GASKETS - hardened PVC 105

HOT TAR SCREWINGHot Tar Screwing

105

HOSE COUPLING (malleable iron)Sandblast Couplings

105 FEMALE THREAD COUPLING (malleable iron) 105GASKET (for malleable iron couplings) 105NOZZLE HOLDER - aluminium with female thread 106HOSE COUPLING – (nylon) 106FEMALE THREAD COUPLING - (nylon) 106GASKET - for nylon couplings 106NOZZLE HOLDER - nylon with female thread 106

HEXAGON BALL VALVES Ball Valves

106Hexagon Ball valve with 2 x female thread 106Hexagon Ball valve with female/male thread 107STANDARD BALL VALVES 107Standard Ball valve with 2 x female thread 107

APN - forged aluminiumAir Blow Guns

107AHL - forged aluminium 107AHM - brass 108APK - plastic

CONTENT

108

5

AABRASPIR CEMENTO 10 SP 34ABRASPIR CLC ECO 36ABRASPIR CLC HARD 36ABRASPIR MINING 10 3 5ABRASPIR PLASTER 40 36ABRASPIR SILOFLEX 8 SP 34ABRASPIR SILO SD 7 34AGRO 20 1 5AGRO 40 1 5AGRO 80 1 5AGRO L 16AGRO M 16AHM - brass 108AIR ACTIV 10 1 7AIR ACTIV 20 1 7AIR ACTIV PU 16AIR ARIACORD 10 1 7AIR ARIACORD 20 18AIR ARIACORD 40 18AIR BLOW GUNS 107AIR INTERLOCK VALVE 97AIR MINING 40 18API Adaptor - automatic 96API Adaptor with handle - mechanical. 96API coupler with handle - mechanical 96API COUPLINGS (API R.P. 1004) for bottom loading 96APK - plastic 108APN - forged aluminium 107APN - forged aluminium 107AQUATIC 5 SP 10AQUATIC 10 1 1AQUATIC 10 SP 1 1AQUATIC FECAL 10 1 1AQUATIC GLASS 12AQUATIC GLASS EXTREME 10G 12AQUATIC GLASS EXTREME 10GAS 12AQUATIC INDUSTRIA 10 10ARIACORD HOT AIR 160 HADE 24ARIACORD HOT AIR 160 HASCE 2 3AUQUATIC INDUSTRIA 20 10

BALL VALVES B

106BIG RELEASE 110BLUCOR 3 7BLUCOR™ COUPLINGS 3 7BLUE FLEXWING® SPECLAR™ (XLPE) 42

CALORCORD SLIM 10C

25CALORCORD WALL 10 2 5CALOR STEAM 150 26CALOR STEAM 165 26CALOR STEAM 165 / NETWASH 10 26CALOR STEAM 165 / NETWASH 20 2 7CALOR STEAM 210 2 7CALOR STEAM 230 2 7CHECK VALVE – with female thread 103CHEMIVAC EPDM 3 9CHEMIVAC EPDM 10 SP 3 9CHEMIVAC UPEL 16 SP 40CHEMIVAC XLPE 10 SP 3 9CHEMIVAC XLPE 16 40CHEMIVAC XLPE 16 SP 40CLIMA AIR 58CLIMA CLEAR 60CLIMA CRISTAL S1 5 9CLIMA CRISTAL S2 5 9CLIMA HEATING - SPIRAFLEX P/L 6 7CLIMA HEATING TR 300 6 7CLIMA LUX - SUPERLASTIC black 6 7CLIMA S1 58CLIMA S1 ANTISTATIK 58CLIMA S2 5 9CLIMA TERMO 60CLIMA TPR 60CLIMA TPR SP6 6 1CLIPFLEX HIGH-TEMP 6 9CLIPFLEX HYPALON 175°C 68CLIPFLEX PE 85°C 68CLIPFLEX PTFE 250°C 6 9CLIPFLEX SILIKON 300°C 6 9

68

COMMERCIAL TERMS AND CONDITIONS 115COUPLER – Female thread 100COUPLER – Male thread 100COUPLER – with hose tail 100COUPLINGS GUILLEMIN 92COUPLINGS RAKLOK 7 9COUPLING – with squeeze nut and spring guard 100CRISTAL FOOD 3 3CRISTAL FOOD SP 3 3

DOUBLE NIPPLES MALE X MALE – G, BSP acc. DIN ISO 228 D

78DRINKFOOD ABRA 7 28DRINKFOOD ABRA 7 SP 28DRINKFOOD CLEAR 3 1DRINKFOOD CLEAR A 3 1DRINKFOOD CLEAR PR 31DRINKFOOD NBR 10 28DRINKFOOD NBR 10 SP 2 9DRINKFOOD NR 10 2 9DRINKFOOD NR 10 SP 2 9DRINKFOOD PU 32DRINKFOOD PVC 32DRINKFOOD RED 32DRY BREAK COUPLINGS 9 5DUSTCAP - API 97

EA COUPLING – female thread E

104EA COUPLING – male thread 104EA COUPLING - with hose tail 104EA COUPLING - with hose tail and safety collar 104EA DUSTCAP 104EA GASKET 104EA UNIVERSAL COUPLINGS 104ELASTOMERS AND POLYMERS SPECIFICATION 114

FABCHEM™ F

4 1FEMALE THREAD COUPLING (malleable iron) 105FEMALE THREAD COUPLING - (nylon) 106FEMALE THREADED FLANGE - PN 16 74FLEXA PUR 5 6 3FLEXA PUR 7 6 3FLEXA PUR H 64FLEXA PUR HEAVY 6 5FLEXA PUR M 64FLEXA PUR ROBUST 6 5FLEXA PUR ROBUST EXTRA 6 5FLEXA PUR S 64FLEXSTEEL® HARDWALL 50FLEXSTEEL® VAPOR ASSIST 5 1FLEXTRA® DRY MATERIAL 3 7FOOT VALVE – inlet with strainer – outlet female thread 103

GASKET (for malleable iron couplings) G

105GASKET - for nylon couplings 106GASKET - for RAKLOK couplings 89GASKETS - hardened PVC 105GEKA COUPLINGS 102GEKA – dust cap 102GEKA – female thread 102GEKA – gasket 102GEKA HEAVY TYPE SPRAY NOZZLES 103GEKA - hose coupling 102GEKA – male thread 102GORILLA 2 1GRAY FLEXTRA® LT 30GUILLEMIN DUSTCAP – with locking ring 93GUILLEMIN - female thread with locking ring 92GUILLEMIN - female thread without locking ring 93GUILLEMIN Gasket 94GUILLEMIN Handled plug without locking ring 94GUILLEMIN - hose tail with locking ring 92GUILLEMIN - male thread with locking ring 93GUILLEMIN - male thread without locking ring 93GUILLEMIN REDUCTION 94

HARVEST™ H

30HEXAGON BALL VALVES 106Hexagon Ball valve with 2 x female thread

INDEX

106

Hexagon Ball valve with female/male thread 107HI-PER® 4 1HORIZON 200 19HORIZON 250 1 9HORIZON 300 1 9HOSE CLAMP 99HOSE CLAMP DIN 20039 A 99HOSE CLAMP DIN 20039 B 99HOSE CLAMP HERKULES 99HOSE COUPLING (malleable iron) 105HOSE COUPLING – (nylon) 106Hose Unit threaded 95HOT TAR SCREWING 105

JET RANGER™ I - O

50KANAFLEX - KANAPOWER ST 120 LT 4 9MALE THREADED FLANGE - PN 16 74Male threaded hose tail 101MIDDLE RELEASE 110MULTI WAY Connector 3x female thread 101MULTI WAY Connector 4x female thread 101 NEPTUNE 1500 22NEPTUNE 3000 22NEPTUNE 4500 22NOZZLE HOLDER - aluminium with female thread 106NOZZLE HOLDER - nylon with female thread 106

ORTAC 250 O

20ORTAC 300 20ORTAC 400 20

PALADINP

49PETROFLEX 10 EN 12115 4 5PETROFLEX 10 SP 46PETROFLEX 10 SP EN 12115 46PETROFLEX 16 EN 12115 46PETROFLEX 16 SP 4 7PETROFLEX CARBOIL 10 4 5PETROFLEX CRISTAL 4 7PETROFLEX FUEL 10 ECO 4 5PETROFLEX PVC 4 7PLICORD® LW BLACK FLEXTRA II™ 48PLICORD® TORRIDAIR™ HOT AIR BLOWER 2 3PLUG – Female thread 100PLUG – Male thread 100PLUG – with hose tail 101PLUG – with squeeze nut and spring guard 101PYROFLEX® HOT TAR & ASPHALT 52PYROFLEX® HOT TAR WAND 52PYROFLEX® II HOT AIR 2 3

RADIACORD FREEZ R

2 5RAKCHEM EEE 10 bar 4 3RAKCHEM EGE 7 bar /10 bar / 14 bar 4 3RAKCHEM SSE 10 / 14 bars 44RAKCHEM SST 7 bar /10 bar (PTFE) 44RAKLOK HANDLE 91RAKLOK CHAIN 91RAKLOK PIN 91RAKLOK RING 91RAKLOK TYPE A 79RAKLOK TYPE B 80RAKLOK TYPE BW B - for welding 89RAKLOK TYPE BW F - for welding 89RAKLOK TYPE C 81RAKLOK TYPE D 82RAKLOK TYPE DC 85RAKLOK TYPE DIN AU 87RAKLOK TYPE DIN CU – for assembly with Safety Clamp 87RAKLOK TYPE DIN DU with thread seal 88RAKLOK TYPE DIN EU - for assembly with Safety Clamp 87RAKLOK TYPE DP 86RAKLOK TYPE E 83RAKLOK TYPE F 84RAKLOK TYPE SW A - for welding 88RAKLOK TYPE SW D - for welding 88RAKOIL GGE 7/10 bar/14 bar 5 3RAKOIL GGR 10 bar 53RAKPETROL 8 4 9

RED FLEXTRA® 7 48RED FLEXTRA® 10 48REDPOINT BITUMEN 220 52REDUCING NIPPLES MALE X FEMALE – G, BSP acc. DIN ISO 228 77REDUCING NIPPLES MALE X MALE – G, BSP acc. DIN ISO 228 78RUBBER EXPANSION JOINT NBR DIN / TW3 77

SANDBLAST COUPLINGS S

105SAND TURBOCORD 10 3 5SAND TURBOCORD 10 ECO 3 5SPOJKY TW TANKER DIN 28450 7 5Spray nozzle with GEKA coupling bayonet 103Spray nozzle with hose tail 103STANDARD BALL VALVES 107Standard Ball valve with 2 x female thread 107STANDARD QUICK DISCONNECT COUPLINGS DN 7,2 100STORZ COUPLINGS 72STORZ - cover 73STORZ – dustcap 73STORZ - female thread 72STORZ – female thread, swivel 72STORZ - gasket 73STORZ hose coupling 72STORZ - male threadSTORZ - male thread, swivel 7 3STORZ REDUCTION 74STORZ WITH FLANGE 74STREETCLEANER 38STREETCLEANER FLEXI PU 38STREETCLEANER HARD 38SUPERFLEX FECAL 1 3SUPERFLEX FECAL SUPER 1 3SUPERFLEX FLAME 1 3SUPERFLEX FLAME CLEAR 14SUPERFLEX PVC 14SUPERIOR CLAMP W 1 98SUPERIOR CLAMP W 4 98

TAN FLEXTRA® T

30Tank Unit threaded 95Tank Unit threaded 96TANKWAGEN EN14420-6 (DIN 28450) fat seal 76TANKWAGEN EN14420-6 (DIN 28450) lip seal 76TANKWAGEN EN 14420-6 (DIN 28450) MB 75TANKWAGEN EN 14420-6 (DIN 28450) MK 75TANKWAGEN EN 14420-6 (DIN 28450) VB 75TANKWAGEN EN 14420-6 (DIN 28450) VK 75TANKWAGEN GA – male hose couplings 76TANKWAGEN GI - female hose couplings 76THREAD seal for RAKLOK couplings 90TODO – GAS® LPG industries 96TODO – MATIC® Pharmaceutical and petrochemical industries 95TW EN14420-3 (DIN 2817) Safety Clamp 77TW Safety clamps EN14420-3 (DIN2817) 99

VENTIDUST ABGAS/TPEV

6 1VENTIDUST ABGAS/TPS 6 1VENTIDUST PUR H 62VENTIDUST PUR M 62VENTIDUST PUR S 62VENTIDUST UNI V2 66VENTIDUST UNI V9 66VENTIDUST UNI VITON 66VINFLEX NEREZ 70VINFLEX NEREZ ECO 70VINFLEX POZINK 70VIPER™ 4 1

WHIRPOOL PVC W

14WINGCRAFT 50WORM DRIVE CLAMP W 1 98WORM DRIVE CLAMP W 4

INDEX

98

7

GENERAL INFORMATIONS

Explanatory notes of symbols Millimeter eqvivalents of fractions

Pressure characteristics

Tolerance of producing hoses according to ISO1307/92

Tolerance of hose lenghts according to ISO1307/92

Explanatory notes

Working temperature

temperature limit of delivered medium

Safety

rate of bursting and working pressure

Norm

norms and atests of single hose types

Reinforcement

inside reinforcement indicate the pressure resistance of hose, the reinforcement can be from textile, nylone, steel, etc.

Tube

inner layer of material which is open contact with delivered medium

Cover

outer layer of material which protect the hose in front of mechanical damage and other outer effects

Use

option use of single hose type according to the experiences of producer or distributor

Innside diameter

(mm)

vacuum

(% of vacuum)

outer diameter

(mm)

radius

(mm)

wall thickness

(mm)

specifc weight

(kg)

working pressure

(WP - bar)

packaging

(m)

mm inch mm inch

6 1/4” 40 1 9/16”

8 5/16” 45 1 3/4”

10 3/8” 50/51 2”

13 1/2” 63 2 1/2”

16 5/8” 75/76 3”

19 3/4” 90 3 1/2”

22 7/8” 102 4”

25 1” 127 5”

32 1 1/4” 133 5 1/4”

38 1 1/2” 152 6”

Pressure conversion

1 MPa = 10 bar

1 bar = 14,5 PSI = 100 kPa

Vacuum conversion

100% vacuum = absolute vacuum

100% vacuum = - 1 bar

mm tolerance - mm tolerance - mm

to 3,2 ± 0,30 ± 0,50

from 3,3 to 10 ± 0,40 ± 0,50

from 10,1 to 20 ± 0,60 ± 0,80

from 20,1 to 25 ± 0,80 ± 1,00

from 25,1 to 40 ± 1,00 ± 1,20

from 40,1 to 63 ± 1,20 ± 1,40

from 63,1 to 90 ± 1,40 ± 1,60

from 90,1 to 125 ± 1,60 ± 2,00

from 125,1 to 150 ± 2,00 ± 2,50

from 150,1 to 200 ± 2,50 ± 2,50

from 200,1 to 315 ± 3,00 ± 3,00

mm tolerance - mm

to 300 ± 3,00

from 301 to 600 ± 4,50

from 601 to 900 ± 6,00

from 901 to 1200 ± 9,00

from 1201 to 1800 ± 12,00

from 1800 ± 1%

INDUSTRIAL HOSESINDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS AUTOMATIC NOZZLES TECHNICAL SHEETS

EXPLANATIONS

Industrial hoses

Water Hosesstr. 10 - 14

Agriculture Hosesstr. 15 - 16

Air and Multipurpose Hoses str. 17 - 21

High pressure washer Hosesstr. 22

Hot air Hosesstr. 23 - 24

Steam / Hot water Hosesstr. 25 - 27

Food Quality Hosesstr. 28 - 33

Abrasion Resistant Hosesstr. 34 - 38

Chemical Transfer Hosesstr. 39 - 44

Petrochemical Hosesstr. 45 - 53

Hydraulic Hosesstr. 54 - 55

INDUSTRIAL HOSESINDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS TECHNICAL SHEETS

AQUATIC INDUSTRIA 10

AUQUATIC INDUSTRIA 20

AQUATIC 5 SP

Water Hoses

Temperature Range Security Factor Norm

-35°C to 80°C 3:1 -

Reinforcement

Textile Wrapped


-40°C to +70°C 3 : 1 -

Reinforcement

Textile Wrapped


-30°C to + 85°C 4 : 1 -

Reinforcement

Textile Wrapped, steel helix

Tube :

SBR, black

Cover :

SBR black, smooth, abrasion and weather resistant

Use :

heavy duty water hose for tough applications in industry, agriculture and construc-

tion sites (Also available in 6 bars).

Tube :

SBR, black

Cover :

SBR black, smooth, abrasion resistant

Use :

extra heavy duty water hose for tough applications in industry, agriculture and

construction sites

Tube :

SBR, black

Cover :

SBR, black, cloth impression, weather resistant

Use :

water hose for suction and delivery purposes in tough applications in industry,

agriculture and construction

5 10,6 2,8 10 - - 0,09 100

8 13 2,5 10 - - 0,12 100

10 15 2,5 10 - - 0,14 100

13 19 3,0 10 - - 0,21 100

16 23 3,5 10 - - 0,29 100

19 26 3,5 10 - - 0,35 100

22 30 4,0 10 - - 0,45 100

25 33 4,0 10 - - 0,51 100

Other sizes on request

6 14 4,0 20 - - 0,18 100

7 16 4,5 20 - - 0,23 100

8 17 4,5 20 - - 0,26 100

10 19 4,5 20 - - 0,30 100

13 23 5,0 20 - - 0,40 100

16 26 5,0 20 - - 0,47 100

19 30 5,5 20 - - 0,60 100

25 37 6,0 20 - - 0,82 100


25 35 5,0 5 95 125 0,62 40

32 43 5,5 5 95 160 1,17 40

38 48 5,5 5 95 190 1,23 40

50 61 5,5 5 95 250 2,06 40

60 72 6,0 5 90 300 2,42 40

75 87 6,0 5 90 375 3,83 40

80 92 6,0 5 90 400 4,23 40

90 103 6,5 5 90 450 4,65 40

100 114 7,0 5 90 500 5,09 40

110 124 7,0 5 90 550 6,20 40


11

INDUSTRIAL HOSES

INDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS TECHNICAL SHEETS

AQUATIC 10 SP

AQUATIC 10

AQUATIC FECAL 10

Water Hoses


-35°C to +80° C 4:1 -

Reinforcement



-30°C to +70°C 4:1 -

Reinforcement

Textile Wrapped


-30°C to +70° C 3:1 -

Reinforcement

Textile Wrapped

Tube :

SBR, black

Cover :

SBR, Black, cloth impression, abrasion and weather resistant

Use :



Tube :

SBR, black

Cover :

SBR, Black, cloth impression, abrasion and weather resistant

Use :



Tube :

SBR, black

Cover :

SBR, Black, corrugated, abrasion and weather resistant

Use :

uction and discharge hose for industry, agriculture, and irrigation plants. To con-

vey water, mud, faces and waste water with a PH index from 5-10. (Also available

in 5 bars)

25 33 4,0 10 95 125 0,62 40

32 40 4,0 10 95 160 0,80 40

40 52 6,0 10 95 200 1,57 40

50 62 6,0 10 95 250 2,15 40

60 73 6,5 10 90 300 2,71 40

75 87 6,0 10 90 375 3,49 40

80 92 6,0 10 90 400 3,71 40

90 105 7,5 10 90 450 4,92 40

100 116 8,0 10 90 500 5,82 40

Other sizes on request (DN 19 to DN300)

18 26 4,0 10 - - 0,34 40

25 34 4,5 10 - - 0,53 40

32 44 6,0 10 - - 0,97 40

40 54 7,0 10 - - 1,42 40

50 68 9,0 10 - - 2,34 40

60 82 11,0 10 - - 3,49 40

70 93 11,5 10 - - 4,20 40

80 103 11,5 10 - - 4,72 40

90 113 11,5 10 - - 5,02 40

100 126 13,0 10 - - 6,46 40


for pressure to 5 bar we offer type AQUATIC 6

25 33 4,0 10 100 125 0,61 1-40

50 60 5,0 10 100 250 1,66 1-40

75 87 6,0 10 100 375 3,17 1-40

80 92 6,0 10 100 400 3,29 1-40

100 114 7,0 10 100 500 4,60 1-40

110 124 7,0 10 100 550 5,62 1-40

125 141 8,0 10 100 625 7,01 1-40

150 168 9,0 10 100 750 10,83 1-40

200 222 11,0 10 100 1000 16,35 1-40

300 328 14,0 10 100 1500 35,83 1-40


for pressure to 5 bar we offer type AQUATIC FECAL 5


AQUATIC GLASS

AQUATIC GLASS EXTREME 10G

AQUATIC GLASS EXTREME 10GAS

Water Hoses


-30°C to +90°C 3:1 -

Radiation temperature approx. 450ºC

Reinforcement

Textile Wrapped


-30°C to +90°C 3 : 1 -


Reinforcement

Textile Wrapped, Steel helix


-30°C to +90°C 4 : 1 -


Reinforcement


Tube :

EPDM, black

Cover :

EPDM, Black, abrasion and weather resistant, vulcanized glass fabric

Use :

Mainly used as a cooling or hot water hose in the iron and steel industry (also

available in 5 bars)

Tube :

EPDM, black

Cover :

EPDM, Black, abrasion and weather resistant, vulcanized glass fabric

Use :

Mainly used as a cooling or hot water hose in the iron and steel industry.

Tube :

EPDM, black

Cover :

EPDM, Black, abrasion and weather resistant, vulcanized glass fabric. External helix

protects the hose

Use :

Mainly used as a cooling or hot water hose in the iron and steel industry.

13 24 5,5 10 - 91 0,40 40

19 31 6,0 10 - 133 0,60 40

25 39 7,0 10 - 175 0,80 40

32 48 8,0 10 - 224 1,20 40

40 58 9,0 10 - 280 1,70 40

50 68 9,0 10 - 350 2,00 40


production according to your demand posssible already by output of 20 meter

125 147 11,0 10 - 875 5,60 30

125 147 11,0 16 - 875 5,60 30

150 174 12,0 10 - 1050 17,60 30

150 174 12,0 16 - 1050 17,60 30


The fttings are standard vulcanized in place

125 147 11,0 10 85 875 5,60 30

125 147 11,0 16 85 875 5,60 30

150 174 12,0 10 75 1050 17,60 30

150 174 12,0 16 75 1050 17,60 30


The fttings are standard vulcanized in place

13

INDUSTRIAL HOSES


SUPERFLEX FECAL

SUPERFLEX FECAL SUPER

SUPERFLEX FLAME

Water Hoses


-15°C to +60°C 3:1 -

Reinforcement

Anti shock rigid PVC helix


-30°C to +50°C 3:1 -

Reinforcement



-35°C to +60°C 3:1 -

Reinforcement


Material :

Material:

Plasticized PVC hose with super elastic material, incorporated reinforcement of

anti-shock rigid PVC helix. Inside surface smooth, light corrugation outside. Very

strong and fexible, is resistant to crushing, abrasion, to atmospherical agents and

to most chemicals.

Use :

For water, mud, faces and waste water. Due to the high fexibility, is highly recom-

mended for use on tank trucks.

Material :

Plasticized Blue PVC hose with super elastic material for low temperature, rein-

forcement with anti-shock rigid PVC helix. The special compound of PVC makes

this hose super highly fexible and cold weather resistant, then any other existing

conventional hose.

Use :

For water, mud, faces and waste water. Due to the high fexibility, is highly re-

commended for use on tank trucks and can operate under very low temperatures.

Material :

Plasticized Red PVC hose with super elastic material for low temperature, rein-

forcement with anti-shock rigid PVC helix. The special compound of PVC makes

this hose super highly fexible and cold weather resistant, then any other existing

conventional hose.

Use :

For sewer cleaning, water, mud, faces and waste water.

25 32,6 3,8 7 100 100 0,41 30

40 49,0 4,5 6 100 160 0,73 30

50 59,6 4,8 5 100 200 1,00 30

63 73,4 5,2 5 90 260 1,39 30

76 87,0 5,5 4 90 310 1,70 30

90 102,6 6,3 4 90 360 2,15 30

100 113,4 6,7 3 85 410 2,70 30

110 124,0 7,0 3 85 450 3,00 30

127 142,0 7,5 3 80 510 3,60 30

Other sizes on request (from DN 20 to DN 60)

25 32,6 3,8 7 100 65 0,41 30

40 49,0 4,5 6 100 130 0,73 30

50 59,6 4,8 5 100 160 1,00 30

63 73,4 5,2 5 90 210 1,39 30

76 87,0 5,5 4 90 250 1,70 30

90 102,6 6,3 4 90 300 2,15 30

100 113,4 6,7 3 85 330 2,70 30

110 124,0 7,0 3 85 360 3,00 30

127 142,0 7,5 3 80 410 3,60 30


25 32,6 3,8 3,0 80 80 0,41 30

32 40,0 4,0 3,0 80 105 0,60 30

40 49,0 4,5 2,4 80 130 0,73 30

50 59,6 4,8 2,2 80 160 1,00 30

63 73,4 5,2 2,0 70 210 1,39 30

76 87,0 5,5 1,8 70 250 1,70 30

100 113,4 6,7 1,3 70 330 2,70 30

127 142,0 7,5 1,1 60 410 3,60 30

150 168,0 9,0 0,9 60 500 5,00 20



SUPERFLEX FLAME CLEAR

SUPERFLEX PVC

WHIRPOOL PVC

Water Hoses


-40°C to +50°C 5:1 -

Reinforcement



-15°C to +60°C 3 : 1 -

Reinforcement



-10°C to +60°C 3 : 1 -

Reinforcement


Material :

Plasticized Transparent with white helix PVC hose with super elastic material for

low temperature, reinforcement with anti-shock rigid PVC helix. The special com-

pound of PVC makes this hose super highly fexible and cold weather resistant,

then any other existing conventional hose.

Use :

For sewer cleaning, water, mud, faces and waste water .

Material :

Plasticized PVC hose with incorporated helix reinforcement of anti-shock rigid

PVC. Smooth inside surface, light corrugation outside. Easy handling, light and

fexible. Resistant to abrasion, to atmospherical agents and to most chemicals.

Use :

Irrigation, suction and delivery of fertilizers, insecticide, middle suction and

delivery of liquids.

Material :

Plasticized PVC hose with helix reinforcement of anti-shock rigid PVC. Internal and

external surface smooth.

Use :

Whirlpools, swimming pools, domestic discharge.

32 40,0 4,0 3,0 80 105 0,60 30

40 49,0 4,5 2,4 80 130 0,73 30

50 59,6 4,8 2,2 80 160 1,00 30

70 81,0 5,5 1,8 70 225 1,60 30

76 87,0 5,5 1,8 70 250 1,70 30

100 113,4 6,7 1,3 70 330 2,70 30

110 124,0 7,0 1,2 60 360 3,00 30

120 135,0 7,5 1,1 60 390 3,35 30

127 142,0 7,5 1,1 60 410 3,60 30

150 168,0 9,0 0,9 60 500 5,00 20


25 29,8 2,4 5 60 140 0,30 30

32 37,2 2,6 5 60 180 0,39 30

40 46,0 3,0 5 60 220 0,55 30

50 57,2 3,6 5 60 270 0,80 30

60 67,2 3,6 5 60 330 0,97 30

63 70,4 3,7 5 60 350 0,90 30

70 77,8 3,9 4 60 450 1,20 30

76 84,2 4,1 4 60 500 1,15 30

80 89 4,5 4 60 550 1,55 30

90 100,0 5,0 4 60 590 1,85 30

15 20 2,5 7 70 80 0,20 30

25 32 3,5 7 70 120 0,42 30

26 32 3,0 6 70 130 0,40 30

27 32 2,5 6 70 140 0,39 30

32 40 4,0 6 70 150 0,62 30

34 40 3,0 5 70 145 0,48 30

40 48 4,0 6 70 160 0,72 30

43 50 3,5 4 70 180 0,72 30

45 50 2,5 3 70 170 0,61 30

55 63,0 4,0 4 70 250 1,00 30


15

INDUSTRIAL HOSES


AGRO 20

AGRO 40

AGRO 80

Agriculture hoses


-10°C to +60°C 3:1 -

Reinforcement

Braided polyester threads


-10°C to +60°C 3:1 -

Reinforcement



-10°C to +60°C 3:1 -

Reinforcement


Tube :

PVC, black

Cover :

PVC, yellow, smooth, abrasive and weather resistant. Light weight, fexible hose

and resistant to most chemicals.

Use :

In agriculture, delivery pressure hose of fungicide solutions also containing mine-

ral oils for agriculture spraying.

Tube :

PVC, black

Cover :

PVC, blue, smooth, abrasive and weather resistant. Light weight, fexible hose and

resistant to most chemicals.

Use :



Tube :

PVC, black

Cover :

PVC, dark blue, smooth, abrasive and weather resistant. Light weight, fexible

hose and resistant to most chemicals.

Use :



8 13 2,5 20 - - 0,11 100

10 15 2,5 20 - - 0,13 100

13 19 3,0 20 - - 0,19 100

16 23 3,5 20 - - 0,28 50

19 26,5 3,8 20 - - 0,34 50

25 33,5 4,3 20 - - 0,49 50


8 14 3,0 40 - - 0,13 100

10 16,5 3,3 40 - - 0,17 100

13 21 4,0 40 - - 0,27 100

16 24 4,0 40 - - 0,33 100

19 28 4,5 40 - - 0,44 100

25 35 5,0 40 - - 0,62 100

8 15 3,5 80 - - 0,17 100

10 18 4,0 80 - - 0,24 100

13 21 4,0 80 - - 0,29 100



AGRO M

AGRO L

AIR ACTIV PU

Agriculture hoses


-10°C to +60°C 3:1 -

Reinforcement



-10°C to +60°C 3 : 1 -

Reinforcement



-10°C to +80°C 3,5 : 1 -

Reinforcement


Material :

Flat plasticized Blue PVC hose with interlaced polyester reinforcement. Weather

resistant light and easy handling. Resistant to light abrasion and chemicals (For

detailed information please see chemicals resistance chart).

Use :

Irrigation for delivery of fertilizers, acids, solutions, when more strength is

required.

Material :

Flat plasticized Yellow PVC hose with interlaced polyester reinforcement. Weather

resistant light and easy handling. Resistant to light abrasion and chemicals (For

detailed information please see chemicals resistance chart).

Use :


required.

Tube :

PU, blue/black

Cover :

PVC, blue, smooth, abrasive and weather resistant. Light weight, fexible hose and

resistant to most chemicals.

Use :


required.

25 - - 10 - - 0,19 50-100

32 - - 10 - - 0,24 50-101

40 - - 9 - - 0,32 50-102

52 - - 8 - - 0,41 50-103

63 - - 8 - - 0,56 50-104

76 - - 7 - - 0,68 50-105

80 - - 7 - - 0,74 50-106

102 - - 7 - - 1,00 50-107

127 - - 6 - - 1,35 50-108

153 - - 4 - - 1,60 50-109


38 - - 5 - - 0,22 50-100

40 - - 5 - - 0,23 50-101

45 - - 5 - - 0,25 50-102

52 - - 5 - - 0,28 50-103

63 - - 4 - - 0,36 50-104

76 - - 4 - - 0,45 50-105

80 - - 4 - - 0,49 50-106

90 - - 4 - - 0,58 50-107

102 - - 4 - - 0,65 50-108

153 - - 3 - - 1,30 50-109


6 10 2,0 20 - - 0,065 100

8 12 2,0 20 - - 0,080 100

10 14,5 2,3 20 - - 0,110 100

11 16 2,5 20 - - 0,135 100

13 19 3,0 20 - - 0,185 100

17

INDUSTRIAL HOSES


AIR ACTIV 10

AIR ACTIV 20

AIR ARIACORD 10

Air and Multipurpose Hoses


-10°C to +60°C 3:1 -

Reinforcement

Textile Wrapped with fbres


-10°C to +80°C 3:1 -

Reinforcement

Textile Wrapped with fbres


-20°C to +70°C 3:1 -

Reinforcement

Textile Wrapped

Tube :

Thermoplast, black

Cover :

Thermoplast, black, smooth, abrasive and weather resistant. Light weight and

fexible hose.

Use :

Compressed air, oxygen and water. Suitable for compressors.

Tube :

NBR, black

Cover :

PVC, black, smooth, abrasive and weather resistant. Light weight and fexible

hose.

Use :

Compressed air, water and applications where a higher pressure is demanded.

Suitable for compressors

Tube :

SBR, black, suitable for oil-laden air

Cover :

SBR, black, smooth, cloth impression abrasive and weather resistant.

Use :

Compressed air, water and oxygen

6 11 2,5 10 - - 0,085 100

8 13 2,5 10 - - 0,105 100

10 15 2,5 10 - - 0,125 100

13 19 3,0 10 - - 0,190 100

16 23 3,5 10 - - 0,270 50

19 26 3,5 10 - - 0,315 50

25 33 4,0 10 - - 0,465 50

6 14 4,0 20 - - 0,160 100

8 17 4,5 20 - - 0,225 100

10 19 4,5 20 - - 0,260 100

13 23 5,0 20 - - 0,360 100

16 26 5,0 20 - - 0,420 50

19 30 5,5 20 - - 0,540 50

25 37 6,0 20 - - 0,740 50

25 34 4,5 10 - - 0,53 40

32 42 5,0 10 - - 0,77 40

38 50 6,0 10 - - 1,12 40

50 64 7,0 10 - - 1,73 40

60 76 8,0 10 - - 2,38 40

76 92 8,0 10 - - 2,95 40

80 96 8,0 10 - - 2,88 40

90 107 8,5 10 - - 3,69 40

100 117 8,5 10 - - 4,06 40



AIR ARIACORD 20

AIR ARIACORD 40

AIR MINING 40



-20°C to +70°C 3:1 -

Reinforcement

Textile Wrapped


-20°C to +70°C 3 : 1 -

Reinforcement

Textile Wrapped


-40°C to +70°C 3 : 1 -

Reinforcement

Steel wire braided

Tube :


Cover :


Use :

Suitable for delivering compressed air and water in power plants, road constructi-

on, tunnelling and quarrying.

Tube :


Cover :


Use :

A robust compressed air hose for lubricant-laden compressed air. Suitable for use

in quarries, surface mining and road construction.

Tube :

SBR/NBR, black, suitable for oil-laden air

Cover :

SBR, yellow, smooth, cloth impression, abrasive and weather resistant.

Use :

A robust compressed air hose for lubricant-laden compressed air. Suitable for use

in quarries, surface mining and road construction.

19 30 5,5 20 - - 0,56 40

25 37 6,0 20 - - 0,80 40

32 48 8,0 20 - - 1,40 40

38 54 8,0 20 - - 1,62 40

50 68 9,0 20 - - 2,36 40

60 78 9,0 20 - - 2,58 40

76 95 9,5 20 - - 3,49 40

90 108 9,0 20 - - 3,79 40

100 118 9,0 20 - - 4,23 40


63 80 8,5 40 - - 2,42 40

75 92 8,5 40 - - 2,83 40

85 102 8,5 40 - - 3,40 40

100 122 11,0 40 - - 5,20 40


25 39 7,0 40 - - 1,17 40

38 54 8,0 40 - - 1,92 40

51 68 8,5 40 - - 2,64 40

63 81 9,0 40 - - 3,52 40

75 94 9,5 40 - - 4,43 40

100 116 8,0 40 - - 5,12 40

19

INDUSTRIAL HOSES


HORIZON 200

HORIZON 250

HORIZON 300



-40°C to +88°C 3:1 -

Reinforcement

Helix synthetic yarn, 2“ is braided


-40°C to +88°C 3:1 -

Reinforcement



-40°C to +88°C 3:1 -

Reinforcement


Tube :

Versigard® synthetic rubber, RMA Class C (Limited Oil Resistance)

Cover :

Black, Red, Yellow, Green or Blue Versigard® synthetic

Use :

Economical hose for air and water in all industrial branches, agriculture and

building industry. An economical air and water hose, Horizon is for a wide range

of industrial, construction, and agricultural applications.

Tube :


Cover :


Use :

An economical air and water hose, Horizon is for a wide range of industrial, con-

struction, and agricultural applications..

Tube :


Cover :


Use :

An economical air and water hose, Horizon is for a wide range of industrial, con-

struction, and agricultural applications.

5 11,2 3,1 13,8 - - 0,12 152,5

6 12,4 3,2 13,8 - - 0,13 152,5

8 14,7 3,4 13,8 - - 0,18 152,5

10 17,0 3,5 13,8 - - 0,22 152,5

13 20,6 3,8 13,8 - - 0,30 152,5

16 24,6 4,3 13,8 - - 0,40 152,5

19 28,4 4,7 13,8 - - 0,51 152,5

25 36,8 5,9 13,8 - - 0,79 152,5

32 43,9 6,0 13,8 - - 1,12 152,5

38 50,3 6,2 13,8 - - 1,28 152,5

51 63,5 6,3 13,8 - - 1,73 152,5

6 13,5 3,8 17,2 - - 0,16 152,5

8 15 3,5 17,2 - - 0,19 152,5

10 17,8 3,9 17,2 - - 0,25 152,5

13 21,3 4,2 17,2 - - 0,33 152,5

16 24,9 4,5 17,2 - - 0,40 152,5

19 29 5,0 17,2 - - 0,52 152,5

6 13,5 3,8 20,7 - - 0,15 152,5

9,5 17,8 4,2 20,7 - - 0,25 152,5

13 21,3 4,2 20,7 - - 0,33 152,5

19 29,2 5,1 20,7 - - 0,55 152,5

25 37,6 6,3 20,7 - - 0,86 152,5


ORTAC 250

ORTAC 300

ORTAC 400



-28°C to +88°C 5 : 1 -

Reinforcement



-28°C to +88°C 5 : 1 -

Reinforcement



-28°C to +88°C 5 : 1 Ortac 400 Yellow is USMSHA approved.

Reinforcement


Tube :

Nitrile synthetic rubber, RMA Class A (high oil resistance)

Cover :

Red or Yellow Carbryn® synthetic rubber, RMA Class A (high oil resistance).

Use :

Used in the most abusive industrial applications, Ortac will handle air, oil, water,

kerosene, and some chemicals. Nonconductive, minimum electrical resistance

greater than one (1) megohm per inch of hose length; at 1000 Volts DC

Tube :


Cover :


Use :




Tube :


Cover :


Use :




6 13,5 3,8 17,2 - - 0,13 152,5

8 17,5 4,8 17,2 - - 0,21 152,5

10 17,5 3,8 17,2 - - 0,22 152,5

13 21,3 4,2 17,2 - - 0,30 152,5

16 25,4 4,7 17,2 - - 0,39 152,5

19 29,0 5,0 17,2 - - 0,51 152,5

25 37,3 6,2 17,2 - - 0,76 152,5

32 45,0 6,5 17,2 - - 1,04 152,5

38 52,8 7,4 17,2 - - 1,43 152,5

51 63,5 6,3 17,2 - - 1,61 152,5

5 11,2 3,1 20,7 - - 0,10 152,5

6 15,5 4,8 20,7 - - 0,21 152,5

8 17,3 4,7 20,7 - - 0,24 152,5

10 18,5 4,3 20,7 - - 0,27 152,5

13 22,6 4,8 20,7 - - 0,37 152,5

16 26,9 5,5 20,7 - - 0,52 152,5

19 30,2 5,6 20,7 - - 0,60 152,5

25 38,1 6,6 20,7 - - 0,88 152,5

32 46,0 7,0 20,7 - - 1,13 152,5

38 52,8 7,4 20,7 - - 1,31 152,5

6 15,5 4,8 27,6 - - 0,24 152,5

10 18,5 4,3 27,6 - - 0,30 152,5

13 22,6 4,8 27,6 - - 0,39 152,5

19 30,0 5,5 27,6 - - 0,61 152,5

25 38,0 6,5 27,6 - - 0,91 152,5

21

INDUSTRIAL HOSES


GORILLA



-28°C to +88°C 5:1 -

Reinforcement

Helix Flexten® yarn, 2“ is braided synthetic yarn

Tube :


Cover :

Yellow Carbryn® synthetic rubber, RMA Class A (high oil resistance).

Use :

A premium-quality, multipurpose industrial hose with a wide range of applications

in factories, construction, agriculture, quarries, mines, railroads, the oil and gas

industry, and shipbuilding. All sizes are rated at 500 psi (3.4 Mpa) maximum

working pressure. Nonconductive, minimum electrical resistance greater than one

(1) megaohm per inch of hose length at 1000 Volts DC

5 11,9 3,5 34,5 - - 0,12 152,5

6 15,5 4,8 34,5 - - 0,25 152,5

8 17,5 4,8 34,5 - - 0,30 152,5

10 18,5 4,3 34,5 - - 0,33 152,5

13 22,6 4,8 34,5 - - 0,42 152,5

16 26,9 5,5 34,5 - - 0,52 152,5

19 30,2 5,6 34,5 - - 0,61 152,5

25 38,1 6,6 34,5 - - 0,86 137,25

32 45,0 6,5 34,5 - - 1,18 137,3

38 51,8 6,9 34,5 - - 1,36 106,75

51 66,5 7,8 34,5 - - 1,77 61


NEPTUNE 1500

NEPTUNE 3000

NEPTUNE 4500

High pressure washer Hoses


-28°C to +93°C 5:1 -

Reinforcement

Braided (1) synthetic yarn up through 1/2“. Braided (2) synthetic yarn for 3/4“.


-29°C to +121°C 5 : 1 -

Reinforcement

Braided (1) steel wire.


-29°C to +121°C 3 : 1 -

Reinforcement

Braided (2) steel wires

Tube :

Nitrile synthetic rubber

Cover :

Blue, Gray, Red, Yellow or Black oil-resistant synthetic rubber, RMA Class B (Medi-

um Oil Resistance)

Use :

For pressure washer equipment, agricultural sprayers, and high-pressure air lines.

Tube :


Cover :

Blue, Gray, Red, Yellow or Black oil-resistant synthetic rubber, RMA Class B (Medi-

um Oil Resistance)

Use :

For use on pressure washer machines with working pressures up to 206 bars.

Tube :


Cover :

Black or Blue oil-resistant synthetic rubber, RMA Class B (Medium Oil Resistance)

Use :

For use on pressure washer machines with working pressures up to 310 bars.

(Also available Neptune 6000 with a WP of 415 bars)

6 15 4,5 103,4 - - 0,16 152,5

8 17,5 4,8 103,4 - - 0,22 152,5

10 19 4,5 103,4 - - 0,27 152,5

13 21,3 4,2 103,4 - - 0,28 152,5

19 31,8 6,4 103,4 - - 0,63 152,5

6 13,5 3,8 206,8 - - 0,24 152,5

10 17,5 3,8 206,8 - - 0,36 152,5

13 20,8 3,9 206,8 - - 0,48 152,5

6 13,7 3,9 310,3 - - 0,31 152,5

10 17,5 3,8 310,3 - - 0,40 152,5

13 20,8 3,9 310,3 - - 0,54 152,5

Also available Neptune 6000 with a WP of 415 bars

23

INDUSTRIAL HOSES


PYROFLEX® II HOT AIR

PLICORD® TORRIDAIR™ HOT AIR BLOWER

ARIACORD HOT AIR 160 HASCE

Hot air Hoses


-29°C to +163°C 4:1 -

Reinforcement

Helix-plied synthetic fabric with wire helix


-29°C to +204°C 4:1 -

Reinforcement

Helix-plied synthetic fabric with double wire helixspiral


-30°C to +160°C 3:1 -

Reinforcement

Textile wrapped, double steel wire helix.

Tube :

Black heat-resistant Versigard® synthetic rubber

Cover :

Heat-resistant black Versigard synthetic rubber with orange helix stripe (wrapped

impression)

Use :

For conveying hot air from compressors to tanks on bulk dry material carriers.

Tube :

Black, STF (Super Thermo-Flo) Versigard® synthetic rubber

Cover :

Black, weather-resistant, STF (Super Thermo-Flo) Versigard® synthetic rubber

(wrapped impression)

Use :

Designed to transfer hot, nonoily air from manifold blowers or in-plant compres-

sors to holding tanks used in the transfer of dry bulk materials.

Tube :

EPDM, Black, smooth, high temperature variant

Cover :

EPDM, black, slightly corrugated, resistant to heat, ozone and weather, cloth

impression

Use :

A compressor hose for use with silo vehicles as a connecting hose between the

discharge compressor and the silo.

51 65 7,0 3,4 98 127 1,82 30,5

76 90 7,0 3,4 98 178 2,87 30,5

102 117 7,5 3,4 98 254 3,94 30,5


51 64 6,5 5,2 98 127 1,58 30,5

63 76 6,5 5,2 98 152 2,01 30,5

76 90 7,0 5,2 98 178 2,74 30,5

102 118 8,0 5,2 98 254 3,71 30,5


51 61 5,0 10 90 357 1,70 40

63 74 5,5 10 85 441 2,20 40

76 88 6,0 8 85 532 3,10 40

90 102 6,0 7 80 630 3,70 40

102 114 6,0 7 80 714 4,80 40



ARIACORD HOT AIR 160 HADE

Hot air Hoses


-30°C to +160°C 3:1 -

Reinforcement

Textile wrapped

Tube :


Cover :

EPDM, black, abrasion resistant, weather resistant, cloth impression.

Use :

A compressor hose for use with silo vehicles as a connecting hose between the

discharge compressor and the silo.

51 63 6,0 10 - 459 1,30 40

63 75 6,0 10 - 567 1,60 40

76 90 7,0 10 - 684 2,20 40

102 118 8,0 10 - 918 3,30 40


25

INDUSTRIAL HOSES


CALORCORD WALL 10

CALORCORD SLIM 10

RADIACORD FREEZ

Steam / Hot water Hoses


-40°C to +120°C 4 : 1 -

Reinforcement

Textile wrapped


-40°C to +120°C 4:1 -

Reinforcement

Textile wrapped


-20°C to +100°C 3:1 -

Reinforcement

Textile wrapped

Tube :


Cover :


Use :

Hot water delivery hose

Tube :


Cover :


Use :

Hot water delivery hose

Tube :

SBR, Black, smooth, high temperature variant

Cover :

SBR, black, abrasion resistant, weather resistant, cloth impression.

Use :

Hot water and anti-freezing liquids delivery hose

10 20 5,0 10 - - 0,30 40

12 22 5,0 10 - - 0,35 40

20 30 5,0 10 - - 0,51 40

25 35 5,0 10 - - 0,61 40

30 41 5,5 10 - - 0,79 40

40 54 7,0 10 - - 1,35 40

50 68 9,0 10 - - 2,27 40

60 82 11,0 10 - - 3,30 40

70 92 11,0 10 - - 3,76 40

80 103 11,5 10 - - 4,39 40


5 10 2,5 10 - - 0,09 40

8 13 2,5 10 - - 0,10 40

10 15 2,5 10 - - 0,12 40

16 23 3,5 10 - - 0,27 40

19 27 4,0 10 - - 0,36 40

25 34 4,5 10 - - 0,52 40

20 26 3,0 10 - - 0,30 40

25 32 3,5 10 - - 0,43 40

32 40 4,0 10 - - 0,63 40

40 49 4,5 10 - - 0,91 40

50 60 5,0 10 - - 1,26 40

60 70 5,0 10 - - 1,45 40

70 81 5,5 10 - - 1,71 40

80 92 6,0 10 - - 2,15 40

90 102 6,0 10 - - 2,40 40

100 113 6,5 10 - - 2,90 40



CALOR STEAM 150

CALOR STEAM 165

CALOR STEAM 165 / NETWASH 10



-40°C to +150°C 3:1 -

Reinforcement

Textile wrapped


-30°C to +165°C 3 : 1 DIN 2825

Reinforcement

Textile wrapped


-30°C to +165°C 3 : 1 -

Reinforcement

Textile wrapped

Tube :

EPDM, Black, smooth

Cover :

EPDM, Black, smooth, cloth impression, weather resistant.

Use :

Hot water and steam delivery hose up to +150ºC

Tube :

EPDM, Black, smooth

Cover :

EPDM, Black, smooth, cloth impression, weather resistant.

Use :

Hot water and steam delivery hose up to +165ºC

Tube :

EPDM, white, smooth, food quality, resistant to temperature and cleaning agents.

Cover :

EPDM, blue, resistant to abrasion, grease and oil, cloth impression.

Use :

Suitable for steam and hot water cleaning purposes and for conveying liquid

products such as milk. Suitable for use in dairies, slaughterhouses and in the food

industry.

10 21 5,5 4 - - 0,31 40

12 23 5,5 4 - - 0,39 40

15 26 5,5 4 - - 0,16 40

19 31 6,0 4 - - 0,61 40

25 37 6,0 4 - - 0,76 40

30 45 7,5 4 - - 1,17 40

35 50 7,5 4 - - 1,33 40

40 56 8,0 4 - - 1,60 40

50 67 8,5 4 - - 2,12 40

60 82 11,0 4 - - 3,30 40


16 29 6,5 8 - 112 0,60 40

19 33 7,0 8 - 133 0,70 40

25 40 7,5 8 - 175 0,90 40

32 48 8,0 8 - 224 1,20 40


13 23 5,0 10 - 85 0,37 40

16 26 5,0 10 - 100 0,43 40

19 29 5,0 10 - 115 0,55 40

25 35 5,0 10 - 150 0,60 40


27

INDUSTRIAL HOSES


CALOR STEAM 165 / NETWASH 20

CALOR STEAM 210

CALOR STEAM 230



-30°C to +165°C 4:1 -

Reinforcement

Textile wrapped


40°C to +210°C 3:1 -

Reinforcement

Two high tensile steel braids


40°C to +210°C 3:1 -

Reinforcement

Two high tensile steel braids

Tube :

EPDM, white, smooth, food quality, resistant to temperature and cleaning agents.

Cover :

EPDM, blue, resistant to abrasion, grease and oil, cloth impression.

Use :

Suitable for steam and hot water cleaning purposes and for conveying liquid

products such as milk. Suitable for use in dairies, slaughterhouses and in the food

industry.

Tube :

EPDM, Black, smooth

Cover :

EPDM, Black, smooth, cloth impression, pin-pricked.

Use :

Special hose for saturated steam, used in closed steam systems in heating and

cleaning applications, drain after use. Also suitable for high pressure air and water

applications.

Tube :

EPDM, Black, smooth

Cover :

EPDM, red, smooth, cloth impression, pin pricked

Use :

Special hose for saturated steam, used in closed steam systems in heating and

cleaning applications, drain after use. Also suitable for high pressure air and water

applications.

13 23 5,0 20 - 85 0,37 40

16 26 5,0 20 - 100 0,43 40

19 29 5,0 20 - 115 0,55 40

25 35 5,0 20 - 150 0,60 40


13 25 6,0 18 - - 0,50 40

16 28 6,0 18 - - 0,56 40

19 34 7,0 18 - - 0,78 40

25 41 8,0 18 - - 0,12 40

32 48 8,0 18 - - 1,35 40

38 56 8,0 18 - - 1,80 40

50 68 9,0 18 - - 2,35 40

63 83 10,0 18 - - 3,40 40

76 95 9,5 18 - - 3,90 40

102 120 9,0 18 - - 5,00 40


16 28 6,0 18 - 112 0,50 40

19 32 6,5 18 - 133 0,60 40

25 38 6,5 18 - 175 0,80 40

32 46 7,0 18 - 224 1,00 40



DRINKFOOD ABRA 7

DRINKFOOD ABRA 7 SP

DRINKFOOD NBR 10

Food Quality Hoses


-35C to +70ºC 3:1 F.D.A., certifed by I.T.C. Zlín

Reinforcement

High tensile textile cord, antistatic wire


-35C to +70ºC 3 : 1 F.D.A., certifed by I.T.C. Zlín

Reinforcement

High tensile textile cord, antistatic wire, steel helix


-35C to +70ºC 5 : 1 F.D.A.

Reinforcement

High tensile textile cord

Tube :

NR/SBR, white, smooth, robust, abrasion and kink resistant

Cover :

SBR, black, smooth with cloth impression, abrasion and weather resistant

Use :

Specially designed hose for pneumatic transport of abrasive dry products such as

grain, powdered milk, plastic granulate, with built in antistatic wire

Tube :

NR/SBR, white, smooth, robust, abrasion and kink resistant

Cover :

SBR, black, smooth with cloth impression, abrasion and weather resistant

Use :

Specially designed hose for pneumatic transport of abrasive dry products such as

grain, powdered milk, plastic granulate, with built in antistatic wire

Tube :

NBR, white, smooth, food quality

Cover :

NBR, blue, smooth with cloth impression

Use :

Robust delivery hose for transporting fatty liquids and beverages such as milk,

olive oil, etc.

50 64 7,0 7 - 250 1,85 40

75 93 9,0 7 - 320 3,37 40

80 100 10,0 7 - 380 3,96 40

90 110 10,0 7 - 410 4,39 40

100 120 10,0 7 - 440 4,83 40

110 130 10,0 7 - 480 5,27 40


50 64 7,0 7 90 250 1,80 40

75 90 7,5 7 90 340 2,90 40

80 95 7?5 7 90 400 3,10 40

90 106 8,0 7 90 420 3,75 40

100 116 8,0 7 90 440 4,00 40


13 21 4,0 10 - 30 0,30 40

19 29 5,0 10 - 40 0,52 40

25 35 5,0 10 - 50 0,65 40

32 46 7,0 10 - 60 1,17 40

40 54 7,0 10 - 100 1,41 40

50 66 8,0 10 - 120 2,02 40

60 78 9,0 10 - 150 2,69 40

63 78 7,5 10 - 160 2,33 40


steam cleaning up to 130°C (max 30 min. in open system)

29

INDUSTRIAL HOSES


DRINKFOOD NBR 10 SP

DRINKFOOD NR 10

DRINKFOOD NR 10 SP

Food Quality Hoses


-35C to +70ºC 5:1 F.D.A.

Reinforcement

High tensile textile cord, steel helix



Reinforcement




Reinforcement

High tensile textile cord, steel helix

Tube :

NBR, white, smooth, food quality

Cover :

NBR, blue, smooth with cloth impression

Use :

Robust delivery hose for transporting fatty liquids and beverages such as milk,

olive oil, etc.

Tube :

EPDM, white, smooth, food quality

Cover :

EPDM, red, smooth with cloth impression

Use :

Robust delivery hose for transporting fat free liquids and beverages such as beer,

wine, fruit juice, etc.

Tube :

EPDM, white, smooth, food quality

Cover :

EPDM, red, smooth with cloth impression

Use :

Robust delivery hose for transporting fat free liquids and beverages such as beer,

wine, fruit juice, etc.

25 35 5,0 10 95 40 0,75 40

32 44 6,0 10 95 50 1,07 40

40 52 6,0 10 95 100 1,25 40

50 62 6,0 10 95 140 1,70 40

63 75 6,0 10 90 150 2,13 40

76 88 6,0 10 90 190 2,70 40

80 96 8,0 10 90 230 3,60 40

100 120 10,0 10 85 280 5,40 40



19 29 5,0 10 - 90 0,40 40

25 35 5,0 10 - 100 0,50 40

32 46 7,0 10 - 140 1,00 40

38 52 7,0 10 - 175 1,10 40

40 54 7,0 10 - 180 1,20 40

50 66 8,0 10 - 230 1,70 40

63 82 8,5 10 - 310 2,70 40

75 91 8,0 10 - 420 3,10 40

80 96 8,0 10 - 470 4,00 40

102 122 10,0 10 - 560 5,90 40



19 29 5,0 10 95 100 0,50 40

25 35 5,0 10 95 110 0,60 40

32 46 7,0 10 95 140 1,10 40

38 52 7,0 10 95 180 1,30 40

40 54 7,0 10 90 190 1,40 40

50 66 8,0 10 90 255 2,10 40

63 82 9,5 10 90 330 3,30 40

76 90 7,0 10 85 440 4,10 40

80 95 7,5 10 85 490 5,10 40

102 122 10,0 10 85 580 7,90 40




GRAY FLEXTRA® LT

HARVEST™

TAN FLEXTRA®

Food Quality Hoses


-32°C to 100°C 4:1 FDA, USDA and 3-A

Reinforcement

Synthetic textile fabric plies and two galvanized helix wires


-32°C to 100°C 4 : 1 F.D.A. / USDA

Reinforcement

Helix-plied synthetic fabric with double galvanized helix wires


-40°C to +82°C 4 : 1 F.D.A.

Reinforcement

Helix-plied synthetic fabric with galvanized helix wire

Tube :

White Chemivic®

Cover :

Gray Chemivic®, corrugated, wrapped impression

Use :

for transferring edibles in gravity fow, pressure, or suction service. Larger I.D.

sizes (5“ and 6“) applicable as “must” hoses in the wine industry.

Tube :

FDA, White Pureten™ synthetic rubber

Cover :

Gray Versigard® synthetic rubber (corrugated)/orange branding tape

(wrapped impression)

Use :

For tank truck and/or in-plant applications for the transfer of dry, nonoily bulk

foodstuffs.

Tube :

Pureten™ gum rubber

Cover :

Tan Pliofex® gum rubber (corrugated) with yellow helix stripe (wrapped impres-

sion)

Use :

For tank truck and in-plant service. Used to convey nonoily abrasive materials

such as sand, limestone, plastic pellets, and dry abrasive food products. Do not

use where static electricity is a problem.

38 49 5,5 10,3 98 64 1,15 30,5

51 62 5,5 10,3 98 76 1,49 30,5

63 76 6,5 10,3 98 127 2,17 30,5

76 89 6,5 10,3 98 140 2,90 30,5

102 116 7,0 10,3 98 191 3,85 30,5

127 144 8,5 10,3 98 305 5,71 30,5

152 169 8,5 10,3 98 432 6,77 30,5


51 69 9,0 10,3 98 127 2,34 30,5

76 95 9,5 10,3 98 178 3,45 30,5

102 121 9,5 10,3 98 254 5,12 30,5

127 150 11,5 10,3 98 381 7,08 30,5


38 53 7,5 10,3 98 102 1,47 30,5

51 66 7,5 10,3 98 102 1,80 30,5

76 92 8,0 10,3 98 152 2,89 30,5

102 119 8,5 10,3 98 229 4,08 30,5

127 147 10,0 10,3 98 305 6,34 15,3

152 172 10,0 10,3 98 381 7,32 15,3


31

INDUSTRIAL HOSES


DRINKFOOD CLEAR A

DRINKFOOD CLEAR

DRINKFOOD CLEAR PR

Food Quality Hoses


-10°C to +60°C 5:1 CEE 90/128 B, C

Reinforcement

Steel helix


-10°C to +60°C 5:1 CEE 90/128 B, C

Reinforcement

Steel helix


-10°C to +60°C 3:1 CEE 1935 / 2004 class A, B and C

Reinforcement

Steel helix and polyester yarn

Material :

Plasticized Transparent PVC hose. Inside and outside smooth. Very fexible,

resistant to atmospherical agents and most chemicals.

Use :

Particularly indicated for suction and delivery of liquids. Suitable for suction and

delivery of alimentary liquids

Material :

Plasticized Transparent PVC hose. Inside and outside smooth. Very fexible,

resistant to atmospherical agents and most chemicals..

Use :

Particularly indicated for suction and delivery of liquids. Suitable for suction and

delivery of alimentary liquids

Material :

Plasticized Transparent PVC hose with double reinforcement. Inside smooth sur-

face. Very fexible, resistant to weather agents and to most chemicals.

Use :

Particularly indicated for suction and delivery of water, alcohol (max. 25%) and

alimentary liquids.

12 18 3,0 6 85 23 0,18 60

16 22 3,0 6 85 30 0,25 60

20 27 3,5 5 85 34 0,35 60

25 33 4,0 5 85 42 0,50 60

32 41 4,5 4 85 53 0,65 60

40 50 5,0 4 85 66 0,87 30

50 60 5,0 4 85 82 1,25 30

60 72 6,0 3,5 80 130 1,70 30

63 75 6,0 3,5 80 138 1,80 30


50 65 7,5 4 95 125 1,60 30

60 75 7,5 3 90 140 2,10 30

70 86 8,0 3 90 180 2,45 30

76 92 8,0 3 90 200 2,70 30

80 96 8,0 3 90 220 3,05 20

90 106 8,0 2 90 260 3,65 20

102 118 8,0 2 90 300 4,15 20

110 128 9,0 1,6 90 320 4,80 20

127 145 9,0 1,2 90 350 5,50 20

150 170 10,0 1,2 90 450 6,90 20


10 18,5 4,25 20 90 30 0,26 60

12 20,5 4,25 20 90 36 0,29 60

14 22,5 4,25 20 90 42 0,32 60

16 25,0 4,50 20 90 48 0,37 60

18 27,0 4,50 20 90 54 0,44 60

20 29,6 4,80 15 90 60 0,50 60

25 35,0 5,00 15 90 75 0,65 60

32 43,0 5,50 12 90 95 0,85 60

38 50,0 6,00 12 90 110 1,15 30

40 52,0 6,00 12 90 120 1,20 30



DRINKFOOD PU

DRINKFOOD PVC

DRINKFOOD RED

Food Quality Hoses


-15°C to +60°C 3:1 -

Reinforcement

Impact resistant white helix of hardened PVC


-10°C to +60°C 3 : 1 CEE 90 / 128 A+B+C

Reinforcement

Impact resistant white helix hardened PVC


-10°C to +60°C 3 : 1 CEE 90/128 B+C

Reinforcement

Impact resistant red helix hardened PVC

Material :

Polyurethane hose reinforced with anti-shock rigid PVC helix, inside surface

perfectly smooth, outside corrugated. Considerable mechanical features. Very

light and fexible. It allows a high resistance against abrasion and bending due to

polyurethane characteristics (5 times superior to normal PVC). Weather resistant,

suitable for most chemicals.

Use :

Suction and delivery of abrasive liquids mud, sand, cement, corn, gravel and for

heavy duty and abrasive industrial application.

Material :

Plasticized PVC hose with incorporated helix reinforcement of anti-shock rigid

PVC. Inside surface smooth, light corrugated outside. Easy handling, light, fexible,

resistant to crushing, abrasion, atmospherical agents and most chemicals. Wea-

ther resistant.

Use :

Suction and delivery of mineral waters, fruit juices, wines, liqueurs up to 25%

alcohol contents, vinegar, alimentary liquids etc.

Material :

Plasticized Transparent PVC hose with incorporated red helix reinforcement

of anti-shock rigid PVC. Inside surface smooth, light corrugation outside. Very

strong and fexible. Resistant to crushing, abrasion, atmospherical agents and

most chemicals. Weather resistant.

Use :

Suction and delivery of dregs, wines, liqueurs up to 25% alcohol contents, alimen-

tary liquids, etc.

38 46 4,0 5 70 182 0,52 30

40 48,0 4,0 5 70 195 0,55 30

45 53,4 4,2 5 70 215 0,67 30

50 59,0 4,5 5 70 235 0,80 30

52 61,0 4,5 5 70 235 0,80 30

60 69,0 4,5 5 70 275 0,97 30

25 30,6 2,8 5 70 130 0,30 30

32 38,0 3,0 5 70 155 0,39 30

40 47,0 3,5 5 70 195 0,55 30

50 58,2 4,1 5 70 235 0,80 30

60 68,2 4,1 5 70 275 0,97 30

70 79,0 4,5 5 70 320 1,20 30

80 90,4 5,2 4 70 365 1,55 30

90 102,0 6,0 4 70 420 1,85 30

100 112,0 6,0 4 70 470 2,20 30

Other sizes on request (from DN 20 - to DN305)

20 26,2 3,1 9 100 110 0,31 50

25 31,6 3,3 9 100 170 0,40 50

32 39,0 3,5 9 100 230 0,52 50

40 48,2 4,1 9 100 0,27 0,76 50

50 59,4 4,7 8 100 350 1,10 50

63 73,8 5,4 8 100 440 1,46 50

76 87,0 5,5 8 100 525 1,90 50

80 92,0 6,0 7 100 555 2,20 30

100 113,8 6,9 6 90 695 3,30 30


Antistatic accompliishment on demand

33

INDUSTRIAL HOSES


CRISTAL FOOD SP

CRISTAL FOOD

Food Quality Hoses


-15°C to +60°C 3:1 -

Reinforcement

Impact resistant white helix hardened PVC


-10°C to +60°C - -

Reinforcement

-

Material :

Plasticized hygienic unexceptionable Transparent PVC hose with incorporated

helix reinforced of anti-shock rigid PVC. Inside surface smooth, light corrugation

outside. Easy handling, light, fexible, resistant to crushing, abrasion, atmospheri-

cal agents and most chemicals.

Use :

Suction and delivery of mineral waters, fruit juices, wines, liquors up to 25% alco-

hol contents, vinegar, alimentary liquid, etc.

Material :

Plasticized PVC hose. Internal and external surface smooth.

Use :

Pressure less transport of liquid, fuid and powdery food mediums.

20 25,6 2,8 5 70 110 0,24 30

25 30,6 2,8 5 70 130 0,30 30

32 38,0 3,0 5 70 155 0,55 30

40 47,0 3,5 5 70 195 0,39 30

50 58,2 4,1 5 70 235 0,80 30

63 71,4 4,2 5 70 290 1,04 30

70 79 4,5 5 70 320 1,20 30

76 85,4 4,7 5 70 340 1,30 30

80 91,2 5,6 4 70 365 1,55 30

100 112,0 6,0 4 70 470 2,20 30


2 4 - - - 0,012 200

3 5 - - - 0,015 200

4 6 - - - 0,020 200

5 8 - - - 0,040 200

6 9 - - - 0,045 100

7 10 - - - 0,050 100

8 12 - - - 0,080 100

9 13 - - - 0,092 100

10 14 - - - 0,100 100

12 17 - - - 0,145 100



ABRASPIR CEMENTO 10 SP

ABRASPIR SILOFLEX 8 SP

ABRASPIR SILO SD 7

Abrasion Resistant Hoses


-40°C to +70°C 3:1 -

Reinforcement

Textile wrapped, Anti defection embedded helix.


-40°C to +90°C 3 : 1 -

Reinforcement

Textile wrapped, Anti defection embedded helix.


-40°C to 90°C 3 : 1 -

Reinforcement

High tensile textile cord, steel helix, antistatic wire.

Tube :

SBR/NR, Black, smooth, antistatic.

Cover :

SBR/NR, Black, smooth, cloth impression, antistatic.

Use :

Bulk abrasive materials suction and discharge hose .

Abrasion :<100mm³ (DIN 53516).

Tube :

NR, Black, smooth, antistatic.

Cover :

NR/SBR, Black, smooth, cloth impression, antistatic.

Use :

Bulk abrasive materials suction and discharge hose .

Abrasion : 50mm³ (DIN 53516).

Tube :

NR/SBR, Black, smooth.

Cover :

SBR, Black, smooth, cloth impression, abrasion and weather resistant.

Use :

Special hose for pneumatic or hydraulic transport of abrasive media such as

cement, sand etc. antistatic compound of hose liner protects from static electricity.

50 64 7,0 10 90 - 1,78 40

60 74 7,0 10 90 - 2,12 40

70 84 7,0 10 90 - 2,51 40

80 95 7,5 10 90 - 3,07 40

100 118 9,0 10 90 - 4,68 40

120 140 10,0 10 90 - 6,10 40


50 66 8,0 8 90 - 1,95 40

75 91 8,0 8 90 - 3,76 40

80 100 10,0 8 90 - 3,88 40

90 110 10,0 8 90 - 4,65 40

100 120 10,0 8 90 - 5,48 40

125 145 10,0 8 90 - 5,70 40


50 64 7,0 7 - 350 1,60 40

76 90 7,0 7 - 532 2,40 40

80 97 8,5 7 - 560 3,10 40

90 108 9,0 7 - 630 3,70 40

102 120 9,0 7 - 714 4,10 40

110 128 9,0 7 - 770 4,40 40

125 143 9,0 7 - 875 5,00 40


Also available on request as a 4 bar hose

35

INDUSTRIAL HOSES


ABRASPIR MINING 10

SAND TURBOCORD 10

SAND TURBOCORD 10 ECO



-25°C to 70°C 3:1 -

Reinforcement



-25°C to 70°C 3:1 -

Reinforcement

Textile cord


-25°C to +70°C 3:1 -

Reinforcement

Textile cord

Tube :

NR/BR/SBR, black, smooth, antistatic, abrasion according to DIN 53516: ~55mm³.

Cover :

SBR, black, smooth / textile impression antistatic, abrasion and weather resistant.

Use :

Specially designed hose for professional use in under ground mining, tunnelling

and street building, suitable for all commonly used media

Tube :

NR/BR, black, smooth, electrical conductivity, abrasion according to DIN 53516:

<50mm³

Cover :

NR/BR, black, smooth with cloth impression

Use :

Specially designed hose for professional use in all shot blast applications and

suitable for all commonly used blasting media.

Tube :

NR/BR/SBR, black, smooth, antistatic, abrasion according to DIN 53516: ~70mm³

Cover :

NR /BR/SBR, black, smooth / textile impression antistatic, abrasion and weather

resistant.

Use :

Ultra wear resistant and thick tube, designed for high kink resistance and perfect

fow, suitable for commonly used fttings

32 52 10,0 10 - 224 1,70 40

38 58 10,0 10 - 266 2,00 40

50 70 10,0 10 - 350 2,50 40

60 80 10,0 10 - 420 2,90 40

63 85 11,0 10 - 441 3,40 40

65 87 11,0 10 - 455 3,50 40


19 34 7,5 10 - - 0,68 40

25 40 7,5 10 - - 0,84 40

32 48 8,0 10 - - 1,13 40

40 60 10,0 10 - - 1,78 40

50 72 11,0 10 - - 2,42 40

60 82 11,0 10 - - 2,82 40


13 27 7,0 10 - 91 0,60 40

19 33 7,0 10 - 133 0,70 40

25 39 7,0 10 - 175 0,90 40

32 48 7,5 10 - 224 1,30 40

38 56 9,0 10 - 266 1,70 40

51 71 10,0 10 - 357 2,40 40



ABRASPIR PLASTER 40

ABRASPIR CLC HARD

ABRASPIR CLC ECO



-25°C to +80°C 3:1 -

Reinforcement

Textile cord


-35°C to +70°C 3 : 1 -

Reinforcement

Textile cord, steel helix, antistatic wire


-35°C to +70°C 3 : 1 -

Reinforcement

Textile cord, steel helix

Tube :

NR/BR/SBR, black, smooth, antistatic, abrasion according to DIN 53516: ~70mm³.

Cover :

NR/SBR, black, smooth with cloth impression, abrasion and weather resistant.

Use :

High pressure hose for plaster spraying and mortar injection machines

Tube :

NR/SBR, black, smooth.

Cover :

SBR, black, smooth with cloth impression, abrasion and weather resistant.

Use :

Special hose for pneumatic or hydraulic transport of abrasive media such as ce-

ment, sand etc. antistatic compound of hose liner protects from static electricity.

Tube :

NR/SBR, black, smooth.

Cover :

SBR, black, smooth with cloth impression, abrasion and weather resistant.

Use :

Special hose for high performance suction equipment for transport of dry or wet

media such as mud, sand, or blasting media. protected against static electricity.

19 31 6,0 40 - 95 0,74 40

25 39 7,0 40 - 125 0,90 40

35 49 7,0 40 - 175 1,20 40

38 54 8,0 40 - 190 1,88 40

50 68 9,0 40 - 250 2,20 40

65 89 12,0 40 - 325 3,80 40


50 62 6,0 5 90 150 1,47 40

75 93 9,0 5 90 225 3,38 40

80 96 8,0 5 90 240 3,20 40

90 106 8,0 5 90 270 3,50 40

100 120 10,0 5 90 300 4,89 40

125 145 10,0 5 90 375 6,46 40

150 172 11,0 5 90 450 9,65 40


40 50 5,0 6 50 200 1,15 40

50 60 5,0 5 45 250 1,55 40

60 72 6,0 4 45 300 2,12 40

75 87 6,0 3 40 375 2,88 40

80 92 6,0 3 40 400 3,06 40

90 102 6,0 3 40 450 3,41 40

100 114 7,0 2 40 500 4,22 40

110 124 7,0 2 30 550 5,10 40


37

INDUSTRIAL HOSES


FLEXTRA® DRY MATERIAL

BLUCOR

BLUCOR™ COUPLINGS



-40°C to +80°C 3:1 -

Reinforcement

Helix-plied synthetic fabric with wire helix.


-32°C to +82°C 3:1 -

Reinforcement

Helix-plied synthetic fabric with wire helix.

Tube :

4,8 mm Gauge Black Tufsyn® synthetic rubber (static dissipating/static

conductive)

Cover :

Black Pliofex® synthetic rubber (corrugated) with yellow helix band (wrapped

impression)

Use :

To convey nonoily abrasive materials such as sand, limestone, and plastic pellets.

Recommended where static build-up can be a problem

Tube :4,8 mm Black Pureten™, 4,8 mm Black Tufsyn™ (static dissipating/static conductive)or 4,8 mm Tan Pureten

Cover :Black corrugated abrasion-resistant Pliofex® (wrapped impression)

Use :Blucor™ material handling hose with the Goodyear 150 psi bolt-on split fange coupling is an easy and economical choice. Blucor has the high strength needed to handle pressure or

suction service in the transfer of dry bulk, slurry, salt, cement, fertilizers, and a limited quantity of oil-based products.

Use :

Each ftting is manufactured of high-tensile 432 aluminium alloy. All fanges are

150 lbs. ANSI B16.5. Bolt-on split fange couplings are supplied with necessary

mounting hardware (bolts, nuts and washers). Internal confgurations of ftting

corrugations have been designed specifcally to match the corrugation of the

Goodyear Blucor

25 40 7,5 5 98 76 1,01 30,5

38 54 8,0 5 98 89 1,53 30,5

51 67 8,0 5 98 102 1,92 30,5

53 80 8,5 5 98 127 2,46 30,5

76 94 9,0 5 98 152 3,20 30,5

102 121 9,5 5 98 229 4,60 30,5


76 111,5 17,8 10 98 406 7,02 30,5

102 133,1 15,6 10 98 508 8,58 30,5

152 187,5 17,8 10 98 914 14,51 30,5

203 240 18,5 10 98 1219 21,59 30,5

254 289,1 17,6 10 98 1524 25,26 15,3

305 398,5 46,8 10 98 1829 37,59 15,3


76 190,5 - - - - 5,36 -

102 228,6 - - - - 5,96 -

152 279,4 - - - - 12,22 -

203 342,9 - - - - 20,86 -

254 406,4 - - - - 37,25 -

305 482,6 - - - - 44,70 -


STREETCLEANER HARD

STREETCLEANER FLEXI PU


STREETCLEANER


-30°C to 85°C 3:1 -

Reinforcement

textile cord, steel helix


-40°C to +90°C, (+125ºC short time) - -

Colour :

Black or transparent

Reinforcement

Shore A ~85, copper plated spring steel helix embedded into wall.

Tube :

NR/BR, black, corrugated

Cover :

NR/BR, black, corrugated with cloth impression

Use :

Special fold hose for street sweeping machines, leaves suck off hose, grass suck

off hose, clusters suck in hose

Material :

Wall made of abrasion resistant Polyurethane.

Use :

Suction and delivery hose for street sweeping machines, Highly fexible in compa-

rison with the rubber type


-30°C to 85°C 3:1 -

Reinforcement

textile cord, steel helix.

Tube :

NR/BR, black, corrugated

Cover :

NR/BR, black, corrugated with cloth impression

Use :

Special fold hose for street sweeping machines, leaves suck off hose, grass suck

off hose, clusters suck in hose

152 - - 0,5 70 570 2,80 0,5-8

203 - - 0,5 60 750 3,85 0,5-8

220 - - 0,5 60 840 4,35 0,5-8

254 - - 0,5 50 950 4,85 0,5-8

280 - - 0,5 50 1070 5,50 0,5-8

305 - - 0,5 50 1160 5,90 0,5-8

400 - - 0,5 30 1640 9,10 0,5-8

Other sizes on request (to DN300)

length of the hose from 0,5 m to 12 m

200 cca 221 - 0,65 - 266 2,80 0,5-10

152 - - 0,5 70 510 2,55 0,5-8

203 - - 0,5 60 650 3,50 0,5-8

220 - - 0,5 60 730 3,90 0,5-8

254 - - 0,5 50 820 4,45 0,5-8

280 - - 0,5 50 910 5,05 0,5-8

305 - - 0,5 50 1000 5,40 0,5-8

400 - - 0,5 30 1400 8,30 0,5-8


length of the hose from 0,5 m to 12 m

39

INDUSTRIAL HOSES


CHEMIVAC EPDM

CHEMIVAC EPDM 10 SP

CHEMIVAC XLPE 10 SP

Chemical Transfer Hoses


-30°C to 95°C 3:1 -

Reinforcement

Textile, 2 crossed copper wires.


-30°C to +100°C (+120°C short time) 4:1 FDA

Reinforcement

Helix-plied synthetic fabric, steel, copper wire


-30°C to 95°C 3:1 -

Reinforcement

Textile, 2 crossed copper wires, steel helix.

Tube :

EPDM, black, smooth, electrically conductive

Cover :

EPDM, black, cloth impression, electrically conductive, abrasion and weather

resistant.

Use :

Suitable for use as a suction and discharge hose in the chemical industry and in

raw materials extraction. Resistant to hot water, detergents, non-oxidising

acids and alkalis.

Tube :

EPDM, black, smooth, electrically conductive

Cover :

EPDM, black, cloth impression, electrically conductive, abrasion and weather

resistant.

Use :

Suitable for use as a suction and discharge hose in the chemical industry and in

raw materials extraction. Resistant to hot water, detergents, non-oxidising

acids and alkalis.

Tube :

XLPE, transparent

Cover :

EPDM, Green, smooth, cloth impression, electrically conductive, abrasion and

weather resistant.

Use :

Handles the majority of today‘s industrial chemicals in pressure, gravity fow, or

suction service.

19 30 5,5 10 - 190 0,50 40

25 34 4,5 10 - 250 0,60 40

32 44 6,0 10 - 320 0,90 40

38 52 7,0 10 - 380 1,20 40

50 68 9,0 10 - 500 2,00 40

63 81 9,0 10 - 600 2,40 40

75 90 7,5 10 - 750 2,30 40

100 120 10,0 10 - 1020 4,50 40


20 29 4,5 10 90 80 0,54 40

30 42 6,0 10 90 130 1,01 40

40 52 6,0 10 90 160 1,28 40

50 62 6,0 10 90 190 1,65 40

60 73 6,5 10 90 240 2,06 40

80 94 7,0 10 90 320 3,02 40

100 116 8,0 10 85 430 4,27 40


19 31 6,0 10 90 110 0,65 40

25 41 8,0 10 90 130 1,14 40

38 54 8,0 10 90 170 1,56 40

40 56 8,0 10 90 190 1,63 40

51 67 8,0 10 90 220 2,11 40

63 81 9,0 10 90 280 3,05 40

76 95 9,5 10 90 370 3,83 40

102 121 9,5 10 85 450 5,18 40



CHEMIVAC XLPE 16

CHEMIVAC XLPE 16 SP

CHEMIVAC UPEL 16 SP



-30°C to +100°C (+120°C short time) 3:1 FDA

Reinforcement

Helix-plied synthetic fabric, copper wire


-30°C to +100°C (+120°C short time) 4 : 1 FDA

Reinforcement

Helix-plied synthetic fabric, steel helix, copper wire


-35°C to 100°C (+120°C short time) 4 : 1 -

Reinforcement

High tensile textile cord, steel helix, two crossing antistatic wires

Tube :

XLPE, transparent

Cover :


weather resistant.

Use :


suction service.

Tube :

XLPE, transparent

Cover :


weather resistant.

Use :


suction service.

Tube :

UPE, black, smooth.

Cover :

EPDM, black, smooth with cloth impression, abrasion and weather resistant.

Use :

Chemical hose for tank trucks and storage tanks

13 21 4,0 16 39 0,30 40

16 24 4,0 16 48 0,30 40

19 27 4,0 16 57 0,30 40

25 34 4,5 16 75 0,50 40

32 41 4,5 16 96 0,60 40

40 51 5,5 16 120 0,90 40

51 61 5,0 16 153 1,10 40


19 31 6,0 16 90 57 0,60 40

25 36 5,5 16 90 75 0,70 40

32 43 5,5 16 90 96 0,80 40

40 52 6,0 16 90 120 1,20 40

51 64 6,5 16 90 153 1,70 40

63 77 7,0 16 90 189 2,20 40

76 89 6,5 16 85 228 2,70 40

80 95 7,5 16 80 240 3,20 40

102 120 9,0 16 80 306 5,00 40


25 37 6,0 16 90 125 0,98 40

32 46 7,0 16 90 160 1,42 40

38 51 6,5 16 90 190 1,68 40

50 64 7,0 16 90 250 2,51 40

63 78 7,5 16 90 315 3,30 40

75 90 7,5 16 90 375 4,35 40

100 116 8,0 16 85 500 6,06 40

125 145 10,0 16 85 625 9,99 40

150 172 11,0 16 75 750 14,81 40

200 224 12,0 16 65 1000 21,27 40


Also CHEMIVAC UPEL 10 SP bar type available.

41

INDUSTRIAL HOSES


VIPER™

FABCHEM™

HI-PER®



-40°C to +121°C 4:1 -

Reinforcement

Helix-plied synthetic fabric with double wire helix


-40°C to +66°C 4:1 -

Reinforcement



-40°C to +149°C 4:1 F.D.A.

Reinforcement


Tube :

Beige Alphasyn™ Modifed Cross-Linked Polyethylene (Modifed XLPE)

Cover :

Black Omegasyn™ abrasion-resistant EPDM with white helix stripe

Use :

For use in pressure, gravity fow and/or suction service. Hose may be cleaned

using open-end steam up to 3 bar or in a bath containing 10% Sodium Hydroxide

(NaOH), up to 100°C.

Tube :

Pliosyn Ultra-High Molecular Weight Polyethylene (UHMWPE)

Cover :

Green Versigard® synthetic rubber with bright orange longitudinal stripe, corruga-

ted (wrapped impression)

Use :

It handles the majority of common industrial chemicals in pressure, gravity fow,

and suction service.

Tube :

Tefon® Fluoroethylenepropylene (FEP) has FDA/USDA compliant materials

Cover :

Blue Versigard® synthetic rubber with bright orange helix transfer tape (wrapped

impression)

Use :

A premium hose which is Tefon® lined to handle a broad spectrum of fuids and

25 38 6,5 13,8 98 102 0,86 30,5

38 50 6,0 13,8 98 127 1,19 30,5

51 66 7,5 13,8 98 178 1,86 30,5

63 78 7,5 13,8 98 203 2,25 30,5

76 92 8,0 13,8 98 254 2,89 30,5

102 119 8,5 13,8 98 356 3,84 30,5


13 24 5,5 13,8 98 76 0,49 30,5

19 31 6,0 13,8 98 89 0,68 30,5

25 37 6,0 13,8 98 102 0,89 30,5

32 44 6,0 13,8 98 102 1,09 30,5

38 50 6,0 13,8 98 127 1,25 30,5

51 65 7,0 13,8 98 152 1,82 30,5

63 80 8,5 13,8 98 203 2,65 30,5

76 93 8,5 13,8 98 229 3,14 30,5

102 119 8,5 13,8 98 254 4,18 30,5


13 25 6,0 13,8 98 76 0,55 30,5

19 28 4,5 13,8 98 127 0,83 30,5

25 39 7,0 13,8 98 191 1,06 30,5

32 44 6,0 13,8 98 279 1,25 30,5

38 54 8,0 13,8 98 356 1,85 30,5

51 68 8,5 13,8 98 457 2,54 30,5

63 80 8,5 13,8 98 559 2,99 30,5

76 93 8,5 13,8 98 889 3,75 30,5



BLUE FLEXWING® SPECLAR™ (XLPE)



- 32°C to +66°C 4:1 -

Reinforcement


Tube :

Clear Speclar™ synthetic rubber Cross-Linked Polyethylene (XLPE)

Cover :

Blue Versigard® synthetic rubber with helix white stripe (wrapped impression

Use :


suction service.

13 24,4 5,7 13,8 98 153 0,45 30,5

19 31 6,0 13,8 98 178 0,67 30,5

25 37,3 6,2 13,8 98 204 0,82 30,5

32 44,4 6,2 13,8 98 229 1,04 30,5

38 51,8 6,9 13,8 98 254 1,42 30,5

51 65,5 7,3 13,8 98 305 1,82 30,5

63 79,5 8,3 13,8 98 381 2,46 30,5

76 94 9,0 13,8 98 457 3,34 30,5

102 120,1 9,1 13,8 98 610 4,48 30,5

152 175 11,5 13,8 98 915 9,15 30,5

43

INDUSTRIAL HOSES



RAKCHEM EEE 10 bar

RAKCHEM EGE 7 bar /10 bar / 14 bar


-30°C to +80°C 5:1 BS 5842

Reinforcement

Inner and outer helix

We can manufacture the hoses acc.to your needs

Inner helix :

E= polypropylene – other options are A - aluminium alloy, G - galvanized steel/

S - stainless steel

Outer helix :

E= polypropylene - other options are A - aluminium alloy, G - galvanized steel /

S - stainless steel

Inner lining :

E= polypropylene – other option is T – PTFE

Cover :

Polypropylene with grey stripe (other colours on request)

Use :

RAKCHEM EEE is recommended for the delivery and/or suction of a wide range of chemical products compatible with polypropylene in cistern trucks, railcars or fxed deposits

Note :

Rakchem hoses can be supplied with for example RAKLOK, Storz, Guillemin, TW, male- female threaded couplings and fanges, according to norm DIN or ANSI. The composite hoses

can be assembled within 24 hours in our warehouse in Most.


-30°C to +80°C 5 : 1 BS 5842, certifed by FTZU

Ostrava - Radvanice

Reinforcement



Inner helix: :

E= polypropylene – other options are A - aluminium alloy, G - galvanized steel/

S - stainless steel

Outer helix :

G= galvanized steel - other options are A - aluminium alloy, E - polypropylene /

S - stainless steel

Inner lining :


Cover :

Polypropylene with red stripe (other colours on request)

Use :

RAKCHEM EGE is recommended for the delivery and/or suction of a wide range of chemical products compatible with polypropylene in cisterntrucks, railcars or fxed deposits.

Note :

Rakchem can be supplied with for example RAKLOK, Storz, Guillemin, TW, male- female threaded couplings and fanges, according to norm DIN or ANSI. The composite hoses can be

assembled within 24 hours in our warehouse in Most

19 - - 10 - 60 0,76 30

25 - - 10 - 65 0,89 30

32 - - 10 - 70 1,09 30

40 - - 10 - 100 1,51 30

50 - - 10 - 180 1,97 30

65 - - 10 - 220 2,96 30

80 - - 10 - 280 3,54 30

100 - - 10 - 340 6,32 20


19 - - 7 to 14 - 60 0,76 30

25 - - 7 to 14 - 65 0,89 30

32 - - 7 to 14 - 70 1,09 30

40 - - 7 to 14 - 100 1,51 30

50 - - 7 to 14 - 180 1,97 30

65 - - 7 to 14 - 220 2,96 30

80 - - 7 to 14 - 280 3,54 30

100 - - 7 to 14 - 340 6,32 20




RAKCHEM SST 7 bar /10 bar (PTFE)

RAKCHEM SSE 10 / 14 bars


-30°C to +100°C 5:1 BS 5842

Reinforcement



-30°C to +80°C 5:1 BS 5842

Reinforcement



Inner helix :

S= stainless steel – other options are A - aluminium alloy, G - galvanized steel/

E - polypropylene

Outer helix :

S= stainless steel - other options are A - aluminium alloy, G - galvanized steel /

E - polypropylene

Inner lining :

T= PTFE - other option is E – polypropylene

Cover :

Polypropylene with green stripe (other colours on request)


Inner helix :

S= stainless steel – other options are A - aluminium alloy, G - galvanized steel/

E - polypropylene

Outer helix :

S= stainless steel - other options are A - aluminium alloy, G - galvanized steel /

E - polypropylene

Inner lining :


Cover :

Polypropylene with green stripe (other colours on request)

Use :

RAKCHEM SST is recommended for the delivery and/or suction of a wide range of highly aggressive chemical products and is used in applications where polypropylene is not appropri-

ate .Its inner lining of PTFE and the stainless steel wire helix make it ideal in use with cistern trucks, railcars or fxed deposits

Note :



Use :

RAKCHEM SSE is recommended for the delivery and/or suction of a wide range of chemical products compatible with polypropylene in cistern trucks, railcars or fxed deposits

Note :



19 - - 7/10 - 60 0,76 30

25 - - 7/10 - 65 0,89 30

32 - - 7/10 - 70 1,09 30

40 - - 7/10 - 100 1,51 30

50 - - 7/10 - 180 1,97 30

65 - - 7/10 - 220 2,96 30

80 - - 7/10 - 280 3,54 30

100 - - 7/10 - 340 6,32 20

Other sizes on request, the length according to your wish

19 - - 10 - 60 0,76 30

25 - - 10 - 65 0,89 30

32 - - 10 - 70 1,09 30

40 - - 10 - 100 1,51 30

50 - - 10 - 180 1,97 30

65 - - 10 - 220 2,96 30

80 - - 10 - 280 3,54 30

100 - - 10 - 340 6,32 20


45

INDUSTRIAL HOSES


PETROFLEX CARBOIL 10

PETROFLEX FUEL 10 ECO

PETROFLEX 10 EN 12115

Petrochemical Hoses


-35°C to +70°C 4:1 -

Reinforcement

high tensile textile cord


- 35°C to +70°C 3:1 -

Reinforcement

high tensile textile cord, two crossing antistatic wires

Temperature Range Security Factor

-30°C to +70°C (+90º short time) 4:1

Norm

EN 12115, certifed by FTZU Ostrava-Radvanice

Reinforcement


Tube :

NBR, black, smooth, oil resistant

Cover :

CR, black, smooth, cloth impression, abrasion and weather resistant

Use :

Special hose for mineral oil products, used for tank trucks, storage tanks, loading

stations

Tube :


Cover :

CR, black, smooth, cloth impression, abrasion and weather resistant

Use :


stations

Tube :

NBR, black, smooth, oil resistant, electrically conductive

Cover :

NBR, black, smooth, cloth impression, abrasion and weather resistant

Use :


stations

5 12 3,5 10 - 40 0,13 100

8 15 3,5 10 - 60 0,17 100

10 17 3,5 10 - 80 0,21 100

13 20 3,5 10 - 100 0,25 100

15 23 4,0 10 - 120 0,33 100

19 27 4,0 10 - 150 0,41 100

25 35 5,0 10 - 200 0,67 100


4 9 2,5 10 - 50 0,07 100

5 10 2,5 10 - 55 0,08 100

6 13 3,5 10 - 70 0,14 100

7 13 3,0 10 - 70 0,13 100

8 14,6 3,3 10 - 80 0,16 100

10 16 3,0 10 - 80 0,17 100

12 19 3,5 10 - 80 0,24 100


19 29 5,0 10 - 100 0,54 40

25 35 5,0 10 - 125 0,66 40

32 42 5,0 10 - 160 0,81 40

38 48 5,0 10 - 190 0,98 40

50 62 6,0 10 - 250 1,37 40

63 75 6,0 10 - 315 1,87 40

70 86 8,0 10 - 340 2,30 40

76 89 7,0 10 - 375 2,58 40

80 96 8,0 10 - 425 3,34 40

100 114 7,0 10 - 500 3,96 40



PETROFLEX 16 EN 12115

PETROFLEX 10 SP

PETROFLEX 10 SP EN 12115

Petrochemical Hoses


-30°C to +70°C (+90º short time) 4:1

Norm

EN 12115, certifed by FTZU Ostrava-Radvanice

Reinforcement



-30°C to +70°C (+90º short time) 4 : 1

Norm

certifed by FTZU Ostrava-Radvanice

Reinforcement

high tensile textile cord, helix wire, two crossing antistatic wires


-30°C to +70°C(+90º short time) 4 : 1

Norm

EN12115, certifed by FTZU Ostrava-Radvanice

Reinforcement


Tube :

NBR, black, smooth, oil resistant, electrically conductive

Cover :


Use :


stations

Tube :


Cover :


Use :

Suction and delivery hose for mineral oil products with an aromatic content

of 50% max.

Tube :


Cover :


Use :


of 50% max.

19 29 5,0 16 100 100 0,54 40

25 35 5,0 16 100 125 0,72 40

32 42 5,0 16 100 160 0,88 40

38 48 5,0 16 100 190 1,13 40

50 61 5,5 16 100 250 1,80 40

63 75 6,0 16 100 315 2,43 40

76 89 7,0 16 100 375 3,72 40

80 96 8,0 16 100 425 3,99 40

100 116 8,0 16 90 500 5,34 40

150 166 8,0 16 85 750 11,17 40


19 29 5,0 10 100 100 0,54 40

25 35 5,0 10 100 125 0,72 40

32 42 5,0 10 100 160 0,88 40

38 48 5,0 10 100 190 1,13 40

50 61 5,5 10 100 250 1,80 40

63 75 6,0 10 100 315 2,43 40

76 89 7,0 10 100 375 3,72 40

80 96 8,0 10 100 425 3,99 40

100 116 8,0 10 90 500 5,34 40

150 166 8,0 10 85 750 11,17 40


19 29 5,0 10 100 100 0,54 40

25 35 5,0 10 100 125 0,72 40

32 42 5,0 10 100 160 0,88 40

38 48 5,0 10 100 190 1,13 40

50 61 5,5 10 100 250 1,80 40

63 75 6,0 10 100 315 2,43 40

76 89 7,0 10 100 375 3,72 40

80 96 8,0 10 100 425 3,99 40

100 116 8,0 10 90 500 5,34 40

150 166 8,0 10 85 750 11,17 40


47

INDUSTRIAL HOSES


PETROFLEX 16 SP

PETROFLEX PVC

PETROFLEX CRISTAL

Petrochemical Hoses


-30°C to +70°C (+90º short time) 4:1

Norm

certifed by FTZU Ostrava-Radvanice

Reinforcement



-15°C to +60°C 4:1 -

Reinforcement

Impact resistant helix, hardened PVC


-10°C to +60°C - -

Reinforcement

-

Tube :


Cover :


Use :


of 50% max.

Tube :

Plasticized Blue PVC hose with incorporated reinforcement of anti-shock rigid PVC

helix. Inside surface smooth, light corrugation outside. Very strong and resistant

to crushing, abrasion, atmospherical agents and most chemicals.

Use :

Suction and delivery of carburants, petrol, gas, mineral oil, etc.


Material :

Plasticized PVC hose. Internal and external surface smooth.

Use :

Pressure less transport of oil product including gas.

19 31 6,0 16 100 100 0,64 40

25 37 6,0 16 100 125 0,82 40

32 44 6,0 16 100 160 0,98 40

38 50 6,0 16 100 190 1,23 40

50 63 6,5 16 100 250 0,92 40

63 77 7,0 16 100 315 2,56 40

76 91 8,0 16 100 375 3,89 40

80 98 9,0 16 100 425 4,32 40

100 118 9,0 16 90 500 5,62 40

150 168 9,0 16 85 750 12,4 40


25 12 4,3 8 100 168 0,55 30

32 15 4,5 8 100 205 0,17 30

40 17 5,0 7 100 255 7,00 30

50 20 5,0 6 100 300 0,80 30

63 23 5,6 6 100 370 1,15 30

70 27 5,8 5 100 410 1,68 30

76 35 5,8 5 100 440 2,00 30

80 35 6,0 5 100 460 2,20 30

90 35 7,0 4 100 530 2,60 30

100 35 7,5 4 90 600 3,30 30


2 4 1,0 - - - 0,012 200

3 5 1,0 - - - 0,015 200

4 6 1,0 - - - 0,020 200

5 8 1,5 - - - 0,040 200

6 9 1,5 - - - 0,045 100

7 10 1,5 - - - 0,050 100

8 12 2,0 - - - 0,080 100

9 13 2,0 - - - 0,092 100

10 14 2,0 - - - 0,100 100

12 17 2,5 - - - 0,145 100



PLICORD® LW BLACK FLEXTRA II™

RED FLEXTRA® 7

RED FLEXTRA® 10

Petrochemical Hoses


-40°C to +82°C 4:1 -

Reinforcement



-34°C to +82°C 4:1 Certifed by FTZU Ostrava Radvanice

Reinforcement



- 34°C to +82°C 4 : 1 Certifed by FTZU Ostrava Radvanice

Reinforcement


Tube :

Black Nitrile RMA Class A (High Oil Resistance)

Cover :

Black Chemivic® (corrugated)

Use :

Used by tank trucks, bulk petroleum stations, and others to transfer petroleum

products under pressure, suction and/or gravity fow. Extremely fexible and

lightweight to provide excellent service. Not recommended where aromatic

content exceeds 50%.

Tube :

Nitrile synthetic rubber RMA Class A (High Oil Resistance)

Cover :

Red Wingprene, corrugated synthetic rubber RMA Class A (High Oil Resistance)

with white helix stripe.

Use :

For the transfer of gasoline and other petroleum-based products under pressure,

gravity fow or full-suction where maximum fexibility is needed.

Tube :

Nitrile synthetic rubber RMA Class A (High Oil Resistance)

Cover :

Red Wingprene, corrugated synthetic rubber RMA Class A (High Oil Resistance)

with white helix stripe.

Use :

For the transfer of gasoline and other petroleum-based products under pressure,

gravity fow or full-suction where maximum fexibility is needed.

51 61,5 5,3 5,2 98 76 1,40 30,5

63 74,2 5,6 5,2 98 102 1,82 30,5

76 86,4 5,2 5,2 98 102 2,07 30,5

102 115,1 6,6 5,2 98 178 3,53 30,5

51 60 4,5 7 98 102 1,29 30,5

63 73 5,0 7 98 127 1,68 30,5

76 87 5,5 7 98 152 2,19 30,5

102 115 6,5 7 98 229 3,42 30,5


51 64 6,5 10,3 98 102 1,76 30,5

76 91 7,5 10,3 98 152 2,96 30,5

102 117 7,5 10,3 98 229 3,96 30,5


49

INDUSTRIAL HOSES


RAKPETROL 8

KANAFLEX - KANAPOWER ST 120 LT

PALADIN

Petrochemical Hoses


-30°C to +70°C 4:1 -

Reinforcement



- 34°C to +60°C 4:1 certifed by FTZU Ostrava-Radvanice

Reinforcement

Textile wrapped, hardened orange PVC helix, copper wire


-34°C to 60°C 3 : 1 -

Reinforcement

Textile wrapped, hardened PVC helix, copper wire

Tube :

NBR, black, oil resistant

Cover :

NBR, black, smooth, cloth impression, abrasion and oil resistant

Use :



lightweight to provide excellent service. Not recommended where aromatic

content exceeds 50%.

Tube :


Cover :

NBR, black, hardened orange PVC helix, abrasion and oil resistant

Use :



lightweight (50% less weight than a rubber hose) to provide excellent service. Not

recommended where aromatic content exceeds 40%.

Tube :


Cover :

Black Chemivic® synthetic rubber with Pliovic® outer helix

Use :

Designed as a lightweight and fexible hose to transfer gasoline and other petroleum products under pressure, gravity fow or medium suction (up to 23“ Hg) at ambient temperatures.

Maximum aromatic content 70%. Outer PVC helix provides abrasion resistance and low coeffcient of friction. With Antistatic wire (low resistance).

51 61 5,00 8 95 180 1,32 40

63 73 5,00 8 95 325 1,65 40

76 86 5,00 8 95 532 2,29 40

102 114 6,00 8 95 229 3,49 40


51 68,0 8,50 4,33 - 127 0,51 30,5

76 93,5 8,75 4,33 - 152 0,62 30,5

102 122,5 10,25 4,33 - 203 0,98 30,5

For armour of heel pieces TW Tankder Din 28450,Storz, Gullemin, Kamlok etc. must be

used so-called armour slleve- length 20cm/heel piece.

Armouring provided by band Bandimex, clip GBS or Security Factor clip Spannloc.

51 72,9 10,95 10,3 78 51,0 1,61 30,5

76 99,6 11,80 10,3 78 76,0 2,43 30,5

102 123,2 10,60 4,2 78 127,0 22,98 30,5

Armouring provided by band Bandimex, clip GBS or Security Factor clip Spannloc.


JET RANGER™

WINGCRAFT

FLEXSTEEL® HARDWALL

Petrochemical Hoses


-37°C to +93°C 4:1 EN 1361/ C NPA 407 API 1529, 5th edition

Reinforcement

Spiral-plied (4) synthetic fabric and one nylon breaker


-37°C to 93°C 4 : 1 meet standard UL 330

Also available acc to EN1360

Reinforcement

steel braid

Tube :

Black Nitrile synthetic rubber

Cover :

Black Wingprene® (ORS) static dissipating/static conductive synthetic rubber

(wrapped fnish)

Use :

Used in the fuelling and defuelling of commercial and private aircraft. Resistant to

jet fuel and higher aromatic aviation gasoline’s. Also for use on hydrant service.

Tube :

Black Nitrile synthetic rubber

Cover :

Black Wingprene® (ORS) static dissipating/static conductive synthetic rubber.

Use :

Used in the fuelling and defuelling of commercial and private aircraft. Resistant to

jet fuel and higher aromatic aviation gasoline’s. Also for use on hydrant service.

Tube :

Nitrile synthetic rubber (ORS)

Cover :

Black, Green, Red, Blue, or Yellow Chemivic® synthetic rubber (ORS)

Use :

Flexsteel® Hardwall is for dispensing pump applications that require a hardwall

construction for full fow and no internal spring guards. The wire-braid construc-

tion provides excellent kink resistance, low computer creep, and long service life


-37°C to +93°C 4:1 EN 1361/ C NPA 407 API 1529, 5th edition

Reinforcement

Spiral-plied synthetic fabric

38 52 7,0 20,7 - - 1,28 30,5

50 65 7,5 20,7 - - 1,70 30,5

63 80 8,5 20,7 - - 2,28 30,5

76 92 8,0 20,7 - - 2,66 30,5

25 40,1 7,6 20,7 - - 0,94 30,5

32 48 8,0 20,7 - - 1,25 30,5

38 54 8,0 20,7 - - 1,43 30,5

51 69,1 9,1 20,7 - - 2,13 31,5

63 81,8 9,4 20,7 - - 2,56 32,5

76 94 9,0 20,7 - - 3,01 33,5

102 121,9 10,0 20,7 - - 4,31 34,5

16 25 4,5 10,3 - - 0,63 152,5

19 29 5,0 10,3 - - 0,67 152,5

*22,2 32,5 5,0 10,3 - - 1,00 152,5

25 35 5,0 10,3 - - 0,77 152,5


*tento rozmìr není Flexsteel Hardwall, ale pouze venkovní hadice Flexsteel Vapor Assist.

51

INDUSTRIAL HOSES


FLEXSTEEL® VAPOR ASSIST

Petrochemical Hoses


-40°C to 60°C 4:1

Norm

EN 13483, Trbf 131/2, ATEX, C.A.R.B. and UL 330/CUL

Reinforcement

Braided (1) steel wire

Tube :

Nitrile synthetic rubber (ORS)

Cover :

Chemivic® synthetic rubber (ORS)

Use :

For Stage II Vacuum Assist Systems where a pump in the dispenser pulls the

gasoline vapours away from the vehicle fll pipe during fuelling. The wire-braid

construction for the fuel hose provides excellent kink resistance, low computer

creep, and long service life.

Note :

Contains inner Nylon hose for exhausting benzin fumes during fulling the vehicles

19 28,5 4,75 10,3 - - 0,89

22,2 32,5 5,15 10,3 - - 1,00

Supplied only in certin lenghts with special endings


Petrochemical Hoses

PYROFLEX® HOT TAR & ASPHALT

PYROFLEX® HOT TAR WAND

REDPOINT BITUMEN 220


-32°C to +177°C 4:1 -

Reinforcement

Spiral-plied Flexten® with wire helix


-32°C to +177°C 4:1 -

Reinforcement

Spiral-plied (2) steel wire


-32°C to 177°C 4:1 -

Reinforcement

Two steel braids, double steel wire helix

Tube :

Black Nitrile (special heat resistant) synthetic rubber RMA Class A (High Oil

Resistance)

Cover :

Black Wingprene® synthetic rubber RMA Class A (High Oil Resistance) with spiral

red stripe

Use :

For the transfer of high temperature petroleum based materials such as tar, as-

phalt, and hot oils. It is suitable for suction and discharge service on tank trucks,

tank cars, or at bulk stations. Heat resistant tube and Flexten reinforcement.

Tube :

Black Nitrile (special heat resistance)

Cover :

Black Wingprene® (wrapped fnish) fame-retardant

Use :

A high quality wand hose used in asphalt crack flling applicator and dispensing

service.

Tube :

EPDM, black, (special heat resistance)

Cover :

EPDM, black, smooth, cloth impression, abrasion and weather resistant

Use :

For loading and discharging of high temperature petroleum based materials such

as tar, asphalt, and hot oils. It is suitable for suction and discharge service on tank

trucks, tank cars, or at bulk stations. Heat resistant tube and Flexten reinforce-

ment.

38 58 10,0 10,3 98 102 1,92 30,5

51 69 9,0 10,3 98 127 2,46 30,5

63 82 9,5 10,3 98 152 3,04 30,5

76 94 9,0 10,3 98 178 3,66 30,5

102 122 10,0 10,3 98 254 5,15 30,5


19 34 7,0 20,7 - - 1,09 30,5

25 41 8,0 20,7 - - 1,32 30,5

38 54 8,0 20,7 - - 2,30 30,5


25 39 7,0 10 98 150 1,09 40

32 46 7,0 10 98 160 1,32 40

50 66 8,0 10 98 200 2,30 40

75 92 8,5 10 98 450 3,20 40

102 125 11,5 10 98 600 4,80 40


53

INDUSTRIAL HOSES


Petrochemical Hoses

RAKOIL GGE 7/10 bar/14 bar

RAKOIL GGR 10 bar


-30°C to +80°C 5:1 BS 5842 certifed

by FTZU Ostrava - Radvanice

Reinforcement



-30°C to +115°C 5:1 BS 5842

Reinforcement



Inner helix :

G= galvanized steel – other options are A - aluminium alloy, S- stainless steel,

E - polypropylene

Outer helix :


E - polypropylene

Inner lining :

E= polypropylene - other option is T – PTFE

Cover :

Polypropylene with yellow stripe (other colours on request)


Inner helix :


E - polypropylene

Outer spiral :


E - polypropylene

Inner lining :

R= polyamide

Cover :

Polypropylene with yellow stripe (other colours on request)

Use :

RAKOIL GGE is recommended for use in delivery and/or suction of fuels, oils and lubricants in cistern trucks, railcars or fxed deposits.

Note :

Rakoil hoses can be supplied with for example RAKLOK, Storz, Guillemin, TW, male- female threaded couplings and fanges, according to norm DIN or ANSI. The composite hoses can

be assembled within 24 hours in our warehouse in Most.

Use :

RAKOIL GGR is recommended for use with high temperature in delivery and/or suction of fuels, oils and lubricants in cistern trucks, railcars or fxed deposits.

Note :

Rakoil hoses can be supplied with for example RAKLOK, Storz, Guillemin, TW, male- female threaded couplings and fanges, according to norm DIN or ANSI. The composite hoses can

be assembled within 24 hours in our warehouse in Most.

19 - - 7 to 14 - 60 0,76 30

25 - - 7 to 14 - 65 0,89 30

32 - - 7 to 14 - 70 1,09 30

40 - - 7 to 14 - 100 1,51 30

50 - - 7 to 14 - 180 1,97 30

65 - - 7 to 14 - 220 2,96 30

80 - - 7 to 14 - 280 3,54 30

100 - - 7 to 14 - 340 6,32 20


19 - - 10 - 60 0,76 30

25 - - 10 - 65 0,89 30

32 - - 10 - 70 1,09 30

40 - - 10 - 100 1,51 30

50 - - 10 - 180 1,97 30

65 - - 10 - 220 2,96 30

80 - - 10 - 280 3,54 30

100 - - 10 - 340 6,32 20



Hydraulic hose DUNLOP 1 SN

Hydraulic hose DUNLOP 2 SN

Hydraulic hose DUNLOP 4 SP/SN

Hydraulic Hoses


-40°C to +100°C 4:1 DIN EN 853, ISO 1436,

SAE 100 R1 AT

Reinforcement

one high tensile steel wire braid


-40°C to +100°C 4 : 1 DIN EN 853, ISO 1436,

SAE 100 R1 AT

Reinforcement

4 high tensile steel spirals

Tube :

oil resistant synthetic rubber

Cover :

abrasion, ozone and weather resistant synthetic rubber

Use :

Mineral oils, vegetable and colza oils, glycol and polyglycol based oils, synthetic

ester based oils, oils in water emulsion, water, diesel fuel (up to 93°C).

Tube :


Cover :


Use :



Tube :


Cover :


Use :

Mineral oils, synthetic ester based oils, glycols and polyglycols, oils in water

emulsion, water.


-40°C to +100°C 4:1 DIN EN 853, ISO 1436,

SAE 100 R1 AT

Reinforcement

two high tensile steel wire braids

6 13,4 3,7 225 80 100 0,315 40

8 15,0 3,5 215 80 115 0,345 40

10 17,4 3,7 180 80 130 0,390 40

12 20,6 4,3 160 80 180 0,515 40

16 23,7 3,9 130 80 200 0,707 40

20 27,7 3,9 105 80 240 0,874 40

25 35,6 5,3 90 80 300 1,083 40

32 43,5 5,8 65 60 420 1,300 40

38 50,8 6,4 50 60 500 1,589 40

50 64,0 7,0 40 60 630 2,165 40


6 15,0 4,5 400 95 100 0,445 40

8 16,6 4,3 350 95 115 0,537 40

10 19,0 4,5 330 95 130 0,607 40

12 22,2 5,1 275 95 180 0,751 40

16 25,4 4,7 250 95 200 0,891 40

20 29,3 4,7 215 80 240 1,083 40

25 38,1 6,6 165 80 300 1,332 40

32 48,3 8,2 125 80 420 1,990 40

38 54,6 8,3 90 80 500 2,402 40

50 67,3 8,7 80 80 630 3,120 40


6 17,9 6,0 450 - 150 0,600 40

10 21,4 5,7 445 - 180 0,780 40

12 24,6 6,3 415 - 230 0,970 40

16 28,2 6,1 350 - 250 1,120 40

20 32,2 6,1 350 - 300 1,575 40

25 39,7 7,4 280 - 340 2,150 40

25 38,7 6,9 380 - 340 2,087 40

32 45,5 6,8 325 - 460 2,571 40

40 53,5 6,8 290 - 560 3,439 40

50 68,1 9,1 250 - 700 4,903 40


55

INDUSTRIAL HOSES


Hydraulic hose 1 SN

Hydraulic hose 2 SN

Hydraulic hose 4 SP

Hydraulic Hoses


-40°C to +100°C 4:1 DIN EN 853

Reinforcement

one high tensile steel wire braid


-40°C to +100°C 4:1 DIN EN 853

Reinforcement

two high tensile steel wire braids


-40°C to +100°C 4 : 1 DIN EN 853

Reinforcement

4 high tensile steel spirals

Tube :


Cover :


Use :



Tube :


Cover :


Use :



Tube :

NBR, black colour, resistent to petroleum products

Cover :


Use :

Mineral oils, synthetic ester based oils, glycols and polyglycols, oils in water

emulsion, water.

5 11,8 3,4 250 80 90 0,17 40

6 14,0 4,0 225 80 100 0,22 40

8 15,5 3,8 215 80 115 0,26 40

10 17,5 3,8 180 80 130 0,34 40

12 21,0 4,5 160 80 180 0,42 40

16 24,0 4,0 130 80 200 0,50 40

19 28,0 4,5 105 80 240 0,63 40

25 36,0 5,5 90 80 300 0,98 40

32 43,5 5,8 65 60 420 1,25 40

38 50,6 6,3 50 60 500 1,60 40

51 64,0 6,5 40 60 630 2,20 40


5 13,7 4,4 415 95 90 0,32 40

6 15,4 4,7 400 95 100 0,35 40

8 16,4 4,2 350 95 115 0,41 40

10 19,2 4,6 330 95 130 0,53 40

12 22,2 5,1 275 95 180 0,64 40

16 25,5 4,8 250 95 200 0,75 40

19 29,5 5,3 215 80 240 0,88 40

25 38,0 6,5 165 80 300 1,42 40

32 48,0 8,0 125 80 420 2,05 40

38 54,6 8,3 90 80 500 2,51 40

51 67,0 8,0 80 80 630 3,16 40


6 17,8 5,9 500 - 150 0,61 40

10 21,4 5,7 445 - 180 0,78 40

12 24,7 6,4 415 - 230 0,92 40

16 28,3 6,2 350 - 250 1,14 40

19 32,1 6,6 350 - 300 1,49 40

25 39,8 7,4 280 - 340 2,02 40

32 50,8 9,4 210 - 460 3,16 40

38 57,0 9,5 185 - 560 3,68 40

51 70,2 9,6 165 - 660 5,29 40


SUCTION HOSESINDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS TECHNICAL SHEETS

EXPLANATIONS

Suction hoses

hoses for air and dustpage 58 - 60

hoses for dust and hot gasespage 60 - 61

hoses for abrasive materials page 62 - 65

hoses for high temperaturepage 66

hoses for air, dust and heating page 67

hoses for high temperature and chemical fumespage 68 - 69

hoses for abrasive materials and hot airpage 70


CLIMA AIR

CLIMA S1

CLIMA S1 ANTISTATIK

air and dust

Temperature Range : Colour :

-10°C to +50°C blue

Material :

Plasticized PVC hose with spiral reinforcement of anti-shock rigid PVC. Inside

surface perfectly smooth, outside coorrugated. Very light and fexible.

Product is available per order

Use :

Suction of air, fumes, gas, powders. Aerating and conditioning plants.


-15°C to +60°C Grey, black per order

Material :

Plasticized PVC hoses with spiral reinforcement of anti-shock rigid PVC. Smooth

inside surface, outside corrugated. Very lightweight and fexible.

Use :

Air conditioning, light pneumatical transport, wood-machine tools, cable prote-

ction,...

Temperature Range : Colour : Hose has atest

-15°C to +60°C black to SNV surrounding

Material :


inside surface, outside corrugated. Very lightweight and fexible.

Use :

For industries, domestic vacuum cleaners, aerating and conditioning plants and

suction of fumes, gas, etc. Antistatic hose for combustible environment (FTZU

Radvanice certifed)

20 - 0,50 - 40 40 0,10 30

25 - 0,50 - 30 40 0,11 30

32 - 0,50 - 30 40 0,14 30

35 - 0,50 - 30 40 0,17 30

38 - 0,50 - 30 50 0,20 30

40 - 0,50 - 30 60 0,20 30

45 - 0,50 - 25 80 0,25 30

50 - 0,50 - 25 90 0,29 30

55 - 0,50 - 25 90 0,36 30

60 - 0,50 - 25 100 0,43 30

63 - 0,50 - 25 100 0,46 30

70 - 0,50 - 25 110 0,50 30

76 - 0,50 - 25 110 0,55 30

100 - 0,50 - 20 160 0,75 30

110 - 0,50 - 20 190 0,90 30

120 - 0,50 - 20 200 1,00 30


16 - 0,70 - 40 28 0,15 20

20 - 0,70 - 40 30 0,15 20

25 - 0,75 - 40 30 0,16 30

32 - 0,75 - 40 35 0,21 30

38 - 0,75 - 35 45 0,26 30

40 - 0,80 - 35 50 0,28 30

50 - 0,85 - 35 60 0,43 30

60 - 0,85 - 30 70 0,50 30

63 - 0,85 - 30 70 0,52 30

70 - 0,90 - 30 90 0,58 30

76 - 0,90 - 30 100 0,64 30

100 - 1,00 - 30 140 0,97 30

110 - 1,00 - 30 150 1,10 30

120 - 1,00 - 30 160 1,20 30

127 - 1,00 - 30 170 1,27 30

150 - 1,10 - 30 180 1,60 20


25 - 0,75 - 40 30 0,16 30

32 - 0,75 - 40 35 0,21 30

40 - 0,80 - 35 50 0,28 30

50 - 0,85 - 35 60 0,43 30

60 - 0,85 - 30 70 0,50 30

63 - 0,85 - 30 70 0,52 30

70 - 0,90 - 30 90 0,58 30

76 - 0,90 - 30 100 0,64 30

100 - 1,00 - 30 140 0,97 30

110 - 1,00 - 30 150 1,10 30

127 - 1,00 - 30 170 1,27 30

150 - 1,10 - 30 180 1,60 20

160 - 1,10 - 30 190 1,78 20

170 - 1,10 - 30 220 1,90 20

180 - 1,10 - 25 300 2,00 20

200 - 1,10 - 25 400 2,20 10


59

SUCTION HOSES


CLIMA S2

CLIMA CRISTAL S1

CLIMA CRISTAL S2

air and dust


-10°C to +50°C grey

+ 14 F ÷ +122F

Material :

Plasticized Pvc hose with spiral reinforcement of anti-shock rigid Pvc. Smooth

inside, outside corrugated. Very light and fexible. Resistant to atmospherical

agents and most chemicals.

Use :

Suction of air, fumes, gas, powders, sawing, dust. Aerating and conditioning

plants, wood working plants etc.


-10°C to +50°C Transparent with white spiral

Material :

Plasticized PVC hoses with spiral reinforcement of anti-shock rigid PVC. Inside

surface perfectly smooth, outside corrugated. Very light and fexible.

Use :

Suction of air, fumes, gas, powders. Aerating and conditioning plants.


-10°C to +60°C Full transparent

Material :


inside surface, outside corrugated. Flexible with an high mechanical resistance.

Resistant to atmospherical agents and to most chemical.

Use :

Vaery fexible vacuum hose, for industries, domestic vacuum cleaners, aerating

and conditioning plants and suction of fumes, gas, etc.

20 - 1,00 - 40 26 0,13 50

25 - 1,00 - 40 32 0,16 50

32 - 1,00 - 35 40 0,24 50

40 - 1,00 - 30 50 0,33 50

50 - 1,00 - 30 60 0,50 50

60 - 1,00 - 30 68 0,60 50

70 - 1,20 - 30 85 0,70 50

76 - 1,20 - 25 100 0,78 50

100 - 1,20 - 25 155 1,25 30

110 - 1,20 - 25 170 1,40 30

127 - 1,20 - 25 190 1,60 30

150 - 1,20 - 20 200 2,00 20

200 - 1,40 - 15 240 2,70 20

250 - 1,40 - 10 280 3,60 10

300 - 1,40 - 10 330 4,50 10


Can be manufactured antistatic upon request.

20 - 0,50 - 40 40 0,10 20

25 - 0,50 - 30 40 0,11 20

30 - 0,50 - 30 40 0,14 30

32 - 0,50 - 30 40 0,14 30

35 - 0,50 - 30 40 0,17 30

38 - 0,50 - 30 50 0,20 30

40 - 0,50 - 30 60 0,20 30

50 - 0,50 - 25 90 0,29 30

55 - 0,50 - 25 90 0,36 30

60 - 0,50 - 25 100 0,43 30

70 - 0,50 - 25 110 0,50 30

76 - 0,50 - 25 110 0,55 30

90 - 0,50 - 20 150 0,67 30

100 - 0,50 - 20 160 0,75 30

110 - 0,50 - 20 190 0,90 30

120 - 0,50 - 20 200 1,00 30


25 - 0,75 - 40 30 0,16 30

32 - 0,75 - 40 35 0,21 30

40 - 0,80 - 35 50 0,28 30

50 - 0,85 - 35 60 0,43 30

60 - 0,85 - 30 70 0,50 30

63 - 0,85 - 30 70 0,52 30

70 - 0,90 - 30 90 0,58 30

76 - 0,90 - 30 100 0,64 30

100 - 1,00 - 30 140 0,97 30

110 - 1,00 - 30 150 1,10 30

127 - 1,00 - 30 170 1,27 30

150 - 1,10 - 30 180 1,60 20

160 - 1,10 - 30 190 1,78 20

170 - 1,10 - 30 220 1,90 20

180 - 1,10 - 25 300 2,00 20

200 - 1,10 - 25 400 2,20 10




CLIMA CLEAR

CLIMA TERMO

CLIMA TPR

air, dust and burning


-20°C to +50°C Transparent with white spiral

Material :


inside surface, outside corrugated. Flexible with an high mechanical resistance.

Resistant to atmospherical agents and to most chemicals.

Use :

Very fexible vacuum hose, for industries, domestic vacuum cleaners, aerating and

conditioning plants and suction of fumes, gas, etc.


-20°C to +100°C (+120°C short time) grey

Meets CL-UL 94 V-O antifame standards.

Material :

Flexible ducting hose made in coated PVC, fame-resistant, textil fabric reinforced

with a steel helix welded between the two fabric layers.

Use :

Civil and naval conditioning plants, ventilation systems, suction of smokes, fumes,

powders, gas.


-40°C to +125°C black

-40 F +250 F

Material :

Flexible duct made in PP/epdm, with a steel spiral. very light and fexible is extre-

mely resistant to high temperature, chemicals and abrasion.

Use :

Suction of hot air and fumes in chemical plants, Mines and Shipyards

25 - 0,50 - 30 40 0,05 30

32 - 0,50 - 30 40 0,14 30

40 - 0,50 - 30 60 0,20 30

50 - 0,50 - 25 90 0,29 30

60 - 0,80 - 25 100 0,43 30

63 - 0,80 - 25 100 0,46 30

70 - 0,80 - 25 110 0,50 30

76 - 0,80 - 25 110 0,55 30

100 - 0,80 - 20 160 0,75 30

110 - 1,00 - 20 190 0,90 30

127 - 1,00 - 20 230 1,10 30

150 - 1,00 - 20 270 1,50 30

160 - 1,00 - 10 280 1,67 20

170 - 1,00 - 10 285 1,75 20

180 - 1,00 - 10 450 1,85 20

200 - 1,20 - 10 600 2,20 10


40 - - - - 20 0,11 10

51 - - - - 25 0,14 10

60 - - - - 30 0,16 10

70 - - - - 35 0,19 10

76 - - - - 40 2,00 10

102 - - - - 50 0,28 10

110 - - - - 55 0,30 10

127 - - - - 63 0,35 10

152 - - - - 75 0,41 10

180 - - - - 90 0,48 10

203 - - - - 100 0,54 10

254 - - - - 125 0,60 10

305 - - - - 150 1,01 10

315 - - - - 160 1,05 10

356 - - - - 175 1,18 10

406 - - - - 200 1,34 10


38 - 0,40 - 20 30 0,17 20

45 - 0,40 - 20 36 0,20 20

51 - 0,40 - 20 40 0,22 20

60 - 0,40 - 17 50 0,26 20

70 - 0,45 - 17 60 0,43 20

76 - 0,45 - 17 65 0,46 20

102 - 0,55 - 13 85 0,58 20

110 - 0,65 - 13 90 0,62 20

127 - 0,65 - 10 105 0,77 20

152 - 0,65 - 8 125 0,93 20

180 - 0,65 - 5 150 1,31 20

203 - 0,65 - 4 165 1,49 20

254 - 0,65 - 4 210 1,95 20

305 - 0,65 - 3 250 2,40 20

356 - 0,65 - 3 290 2,80 20

406 - 0,65 - 2 350 4,10 20


61

SUCTION HOSES


CLIMA TPR SP6

VENTIDUST ABGAS/TPE

VENTIDUST ABGAS/TPS

dust and hot gases



Material : TPR SP 6 fexible hoses are manufactured of EPDM coated polyester

fabric with a spring steel spiral integrated into the wall. Vibration-resistant. They

are universally suited for intermediate-temperature applications. Heavy-duty,

excellent chemical resistance, UV and ozone-resistant.

Use : For ventilation, connections, heating, dust removal. Ideal for the exhaust

of gases and dusts in chemical industry applications. Kink-proof, small bending

radius.



Material : ABGAS/TPE hoses are manufactured a polyester fabric coated with TPK

on both sides, with an embedded, heat-resistant nylon spiral and additional TPK

abrasion protection covering the spiral. Robust, highly fexible and tear-resistant

due to fabric reinforcement. Color black or black with red abrasion protection.

Non-recoverable.

Use : Light, highly fexible, non-recoverable rubber hose with smooth interior and

nylon spiral specially designed for hose reels and on-foor equipment for waste

gas extraction with blower support in car manufacturing and garages. Good

chemical resistance to gas, diesel, oil and fats.



Material : ABGAS/TPS hoses are manufactured of polyester fabric coated with TPK

on both sides, with an embedded spring steel spiral and additional TPK abrasion

protection covering the spiral. Robust, highly fexible and tear-resistant due to

fabric reinforcement. Color black with black abrasion protection. Non-recoverable.

Use : Light, highly fexible, non-recoverable rubber hose with smooth interior and

spring steel spiral specially designed for hose reels and on-foor equipment for

waste gas extraction with blower support in car manufacturing and garages. Good

chemical resistance to gas, diesel, oil and fats.

38 - - 0,65 25

cca 2 x

DN of

hose

0,25

5 / 7,5 /

10 / 20

40 - - 0,6 25 0,32

45 - - 0,55 22 0,41

51 - - 0,5 20 0,41

60 - - 0,45 20 0,45

63 - - 0,45 20 0,52

70 - - 0,4 18 0,59

76 - - 0,35 15 0,70

80 - - 0,35 12 0,74

90 - - 0,3 10 0,83

102 - - 0,25 8 0,87

110 - - 0,25 8 1,01

127 - - 0,2 6 1,30

152 - - 0,15 5 1,44

160 - - 0,15 5 1,51

51 - - 0,50 20

cca 2 x

DN of

hose

0,41

5 / 7,5 /

10 / 20

60 - - 0,45 20 0,45

63 - - 0,45 20 0,52

70 - - 0,40 18 0,59

76 - - 0,35 15 0,70

80 - - 0,35 12 0,74

90 - - 0,30 10 0,83

102 - - 0,25 8 0,87

110 - - 0,25 8 1,01

121 - - 0,20 6 1,20

127 - - 0,20 6 1,30

140 - - 0,18 5,5 1,38

152 - - 0,15 5 1,44

160 - - 0,15 5 1,51

25 31 - 1,70 20 25 0,09

10 / 20

28 34 - 1,60 20 28 0,12

32 38 - 1,50 20 32 0,14

44 50 - 1,30 16 44 0,17

51 57 - 1,30 15 51 0,21

63 69 - 1,00 14 63 0,27

76 82 - 0,80 1 76 0,32

80 86 - 0,70 9 80 0,33

89 95 - 0,70 9 89 1,45

102 108 - 0,60 8 102 0,57

110 116 - 0,40 5 110 0,62

125 131 - 0,20 5 125 0,70

130 136 - 0,20 5 130 0,72

150 156 - 0,20 4 150 0,78

160 166 - 0,20 4 160 0,80


VENTIDUST PUR S

VENTIDUST PUR M

VENTIDUST PUR H

abrasive materials

Temperature Range : Colour : FDA certifcate

-20°C to +50°C transparent with white spiral

Material : Plasticized PVC hoses with spiral reinforcement of anti-shock rigid

PVC. Smooth inside surface, outside corrugated. Flexible with an high mechanical

resistance. Resistant to atmospherical agents and to most chemicals.

Use : Very fexible vacuum hose, for industries, domestic vacuum cleaners, aera-

ting and conditioning plants and suction of fumes, gas, etc.


-20°C to +80°C Clear transparent with ivory spiral

Material : Polyuretane hose reinforced with anti-shock rigid PVC spiral, inside sur-

face perfectly smooth, outside corrugated. Considerable mechanical features. Very

light and fexible. It allows a high resistance against abrasion and bending due to

polyurethane characteristics (5 times superior to normal PVC). Weather resistant,

suitable for most chemicals.

Use : Suction and discharge of abrasive powders, fumes, shavings, vapours and

for heavy duty industrial and abrasive applications.


-20°C to +80°C transparent with grey spiral

Material : Polyuretane hose reinforced with anti-shock rigid PVC spiral, inside

surface: perfectly smooth, outside corrugated. Considerable mechanical features.

Very light and fexible allows a high resistance against abrasion and bending

due to polyurethane characteristics (5 times superior to normal PVC). Weather

resistant, suitable for most chemicals.

Use : Suction and delivery of abrasive liquids mud, sand, cement, corn, gravel and

for heavy duty and abrasive industrial application.

20 - 0,40 - 40 25 0,12 20

25 - 0,40 - 40 30 0,14 20

32 - 0,40 - 40 35 0,19 20

40 - 0,50 - 30 50 0,24 20

50 - 0,60 - 30 70 0,34 20

60 - 0,60 - 30 80 0,40 20

70 - 0,60 - 30 95 0,52 20

76 - 0,60 - 30 100 0,55 20

100 - 0,80 - 30 140 0,80 20

110 - 0,80 - 30 150 0,98 20

120 - 0,80 - 30 160 1,01 20

127 - 0,80 - 30 170 1,10 20

130 - 0,80 - 30 170 1,15 20

150 - 0,80 - 30 200 1,45 20

200 - 1,00 - 30 260 2,30 10



38 - 0,80 - 30 130 0,31 30

40 - 1,00 - 30 140 0,35 30

50 - 1,00 - 30 175 0,54 30

60 - 1,00 - 30 200 0,64 30

70 - 1,00 - 30 250 0,75 30

76 - 1,00 - 25 270 0,78 30

100 - 1,00 - 25 400 1,25 30

102 - 1,00 - 25 400 1,25 30

120 - 1,00 - 20 470 1,50 30

127 - 1,00 - 20 500 1,60 30

140 - 1,00 - 20 570 1,80 30

150 - 1,00 - 20 600 2,00 20

203 - 1,40 - 20 650 2,90 20

254 - 1,40 - 15 700 3,60 20

305 - 1,40 - 15 780 4,30 20



30 - 1,20 3,0 90 130 0,32 30

32 - 1,20 3,0 90 140 0,34 30

38 - 1,20 3,0 90 180 0,41 30

40 - 1,30 3,0 90 190 0,49 30

50 - 1,50 3,0 80 215 0,69 30

60 - 1,50 3,0 80 230 0,91 30

63 - 1,50 3,0 80 240 0,96 30

70 - 1,50 2,5 80 250 1,00 30

76 - 1,50 2,5 80 270 1,15 30

90 - 2,00 2,5 70 380 1,40 30

100 - 2,00 2,5 70 420 1,60 30

102 - 2,00 2,5 70 420 1,60 30

120 - 2,00 2,0 65 480 2,35 30

127 - 2,00 1,5 65 530 2,50 30

150 - 2,00 1,5 65 800 3,10 20



63

SUCTION HOSES


FLEXA PUR 5

FLEXA PUR 7

abrasive materials


-40°C to +90°C transparent

Material : PU hoses are composed of a 0.5 mm polyurethane coating with a bron-

zed spring steel spiral integrated into the wall. High tear and abrasion resistance,

excellent elasticity. In most cases more abrasion-resistant than PVC hoses. The

transparency of the material allows monitoring the inside of the hose. Will also

remain fexible below 0°C.

Use : Aspiration of dust, wood four, shavings , granulate, powder, gases and

fumes. Furniture and wood industry, shavings exhaust, chemical industry, paint

industry, oil fog exhaust, machine manufacturing, photography.



Material : PU hoses are composed of a 0,7 mm polyurethane coating with a bron-

zed spring steel spiral integrated into the wall. High tear and abrasion resistance,

excellent elasticity. In most cases more abrasion-resistant than PVC hoses. The

transparency of the material allows monitoring the inside of the hose. Will also

remain fexible below 0°C.

Use : Exhaust of dust, wood four, shavings , granulate, powder, gases and fumes.

Furniture and wood industry, shavings exhaust, chemical industry, paint industry,

oil fog exhaust, machine manufacturing, photography.

Layer between

spirals 0,5 mm

Layer between

spirals 0,5 mm

25 - 0,5 1,70 20 25 -

10 /

max 20

28 - 0,5 1,60 20 28 -

32 - 0,5 1,50 20 32 -

38 - 0,5 1,40 20 38 -

51 - 0,5 1,30 15 51 -

63 - 0,5 1,00 14 63 -

70 - 0,5 0,90 12 70 -

76 - 0,5 0,80 10 76 -

100 - 0,5 0,60 8 102 -

110 - 0,5 0,60 8 110 -

125 - 0,5 0,50 7 125 -

140 - 0,5 0,50 6 140 -

150 - 0,5 0,50 6 150 -

160 - 0,5 0,50 6 160 -


fameproof certifcate only on demand

25 - - 1,70 20 25 -

10 /

max 20

28 - - 1,60 20 28 -

32 - - 1,50 20 32 -

38 - - 1,40 20 38 -

51 - - 1,30 15 51 -

63 - - 1,00 14 63 -

70 - - 0,90 12 70 -

76 - - 0,80 10 76 -

102 - - 0,60 8 102 -

110 - - 0,60 8 110 -

125 - - 0,50 7 125 -

140 - - 0,40 6 140 -

150 - - 0,35 5 150 -

160 - - 0,35 3 160 -


fameproof certifcate only on demand


FLEXA PUR S

FLEXA PUR M

FLEXA PUR H

abrasive materials


-40°C to +90°C Traslucent with steel zinc-plated spiral

Material :

PU hose reinforced with steel zinc-plated spiral. Inside semi-smooth surface.

Considerable mechanical features. Very light and fexible. It allows a high

resistance against abrasion and bending, thanks to the PU features, which are

times superior to normal PVC. Weather resistant, suitable for most chemicals.

Use :

Suction and discharge of abrasive powders, fumes, shavings, vapours and heavy

duty industrial and abrasive applications.


-40°C to +90°C Traslucent with steel zinc-plated spiral

Material :

PU hose reinforced with a coppered steel spiral. Inside surface smooth. Conside-

rable mechanical features. Very light and fexible. It allows a high resistance aga-

inst abrasion and bending, thanks to the PU features, which are 5 times superior

to normal PVC. Weather resistant, suitable for most chemicals.

Use :




-40°C to +90°C Traslucent with steel zinc-plated spira

Material :

Pu hose reinforced with a coppered steel spiral, Heavy duty version. Inside surface

smooth. Considerable mechanical features. Very light and fexible. It allows a high

resistance against abrasion and bending, thanks to the PU features, which are 5

times superior to normal PVC. Weather resistant, suitable for most chemicals.

Use :



60 - 0,35 - 4,0 30 0,28

10 /

max 20

70 - 0,35 - 4,0 35 0,36

76 - 0,35 - 4,0 38 0,39

102 - 0,40 - 3,0 50 0,52

110 - 0,40 - 2,5 55 0,56

120 - 0,40 - 2,5 60 0,61

127 - 0,40 - 2,5 64 0,65

152 - 0,40 - 1,5 75 0,77

203 - 0,45 - 1,0 100 1,12

254 - 0,50 - 1,0 125 1,32

305 - 0,50 - 0,8 150 1,58

350 - 0,50 - 0,8 175 1,82


Variants :

DIN 4202 61 freproof design, type , antistatic design -type PUR S HIREFLEX PUR S ANISTAT, blackdesign - type , antistatic + black design - type PUR S BLACK PUR S BLACK ANISTAT, FDE foodstuff design - type , el.conducting + black design - type PUR S FDA PUR S EL,

design against mIcrobes - type PUR S AE

38 - 0,40 - 20 30 0,19

10 /

max 20

40 - 0,40 - 20 32 0,20

51 - 0,40 - 20 40 0,25

60 - 0,40 - 17 50 0,30

63 - 0,40 - 17 55 0,31

70 - 0,45 - 17 60 0,47

76 - 0,45 - 17 65 0,51

102 - 0,55 - 13 85 0,65

110 - 0,55 - 12 90 0,69

127 - 0,65 - 10 105 0,85

152 - 0,65 - 8 125 1,05

203 - 0,65 - 4 165 1,65

305 - 0,65 - 3 250 2,65

356 - 0,60 - 3 300 3,10


Variants :

DIN 4202 61 freproof design, type , antistatic design -type PUR S HIREFLEX PUR S ANISTAT, el. conductive +black design - type , FDA foodstuff design - typePUR S BLACK PUR S FDA

40 - 0,80 - 50 50 0,38

10 /

max 20

51 - 0,90 - 50 60 0,48

60 - 0,90 - 40 70 0,55

70 - 1,00 - 40 80 0,74

76 - 1,10 - 35 90 0,78

102 - 1,10 - 25 120 1,00

110 - 1,10 - 25 130 1,25

120 - 1,10 - 20 140 1,35

127 - 1,10 - 20 150 1,40

130 - 1,10 - 20 150 1,45

140 - 1,10 - 15 160 1,55

152 - 1,10 - 15 170 1,65

160 - 1,10 - 15 180 2,40

203 - 1,10 - 10 230 3,00

254 - 1,10 - 5 290 3,75

305 - 1,10 - 5 350 4,50

Other sizes on request (od DN 38 - do DN 400)

65

SUCTION HOSES


FLEXA PUR ROBUST

FLEXA PUR ROBUST EXTRA

FLEXA PUR HEAVY

abrasive materials



Material : Flexible, heavy polyurethane hoses, transparent with molded-in bronzed

spring steel spiral. Relatively smooth interior wall (thickness between spirals = 1.5

mm). Robust for the discharge of solid media. High interior abrasive resistance.

In many cases more abrasion-resistant than PVC hoses. Also available as food-

grade versions. Extremely vacuum-resistant.

Use : Industrial vacuum cleaners, wood industry, granulate output, plastic proces-

sing, mechanical engineering, agriculture, sandblasting, textile industry, delivery

of cereals.



Material : Flexible, heavy polyurethane hoses, transparent with molded-in bronzed

spring steel spiral. Relatively smooth interior wall (thickness between spirals = 2,1

mm). Robust for the discharge of solid media. High interior abrasive resistance.

Also available as food-grade versions. Extremely vacuum-resistant.

Use : Industrial vacuum cleaners, wood industry, granulate output, structural and

civil engineering, food industry, chemical industry, plastic processing, mechanical

engineering, agriculture, sandblasting, textile industry, delivery of cereals.



Material : Hoses are manufactured of an extremely thick-walled polyurethane coat with a twist- and dislocation-proof, bronzed spring steel spiral molded into the hose wall (thickness between spirals = 3 mm). Relatively smooth interior wall with particular reinforcement of the abrasion-sensitive weak point below the wire, therefore extremely abrasion-resistant. In many cases more abrasion-resistant than rubber and PVC hoses.

Use : Designed for silo vehicles, for the discharge of gravel, sand, cement, sandblasting materials and other abrasive materials, for heavy industrial vacuum cleaners, delivery of

cereals, sugar and milk powder delivery, granulate output, steel wool exhaust, wrecking companies, chemical industry.

Layer between

spirals 1,5 mm

Layer between

spirals 2,1 mm

Layer between

spirals 3 mm

25 32 1,5 4,10 90

cca 1,5

x DN of

hose

0,31

10 /

max 15

32 39 1,5 3,20 90 0,40

38 46 1,5 2,70 80 0,47

50 58 1,5 2,00 60 0,62

60 68 1,5 1,70 50 0,75

75 85 1,5 1,30 40 0,94

100 110 1,5 1,00 30 1,21

125 135 1,5 0,80 25 1,51

150 160 1,5 0,70 20 1,80

200 210 1,5 0,50 15 2,89

225 235 1,5 0,40 15 3,20

250 260 1,5 0,40 15 3,49

Other sizes on request (DN 25 - 500)

Variants :

FDA design - PUR ROBUST FDA, resistent to microbes - PUR ROBUST AE

38 48 2,1 3,80

100%

vacuum cca 4 x

DN of

hose

0,80

10 /

max 15

40 50 2,1 3,70 0,85

50 60 2,1 2,90 1,08

60 70 2,1 2,20 1,38

75 87 2,1 1,90 1,59

100 112 2,1 1,40 2,10

110 122 2,1 1,30 2,29

125 137 2,1 1,10 2,59

150 162 2,1 1,00 3,10

200 213 2,1 0,70 90 4,98

225 237 2,1 0,60 70 5,58

250 263 2,1 0,60 65 6,01


Variants :

FDA design - PUR ROBUST EXTRA FDA,resistent to microbes - PUR ROBUST AE

38 51 3,0 3,80 80

cca 4 x

DN of

hose

0,80

10 /

max 15

40 53 3,0 3,70 80 0,85

50 63 3,0 2,90 80 1,08

60 73 3,0 2,40 80 1,29

75 89 3,0 1,90 80 1,59

100 114 3,0 1,40 80 2,10

110 123 3,0 1,30 80 2,29

125 139 3,0 1,10 80 2,59

150 164 3,0 1,00 80 3,10

200 217 3,0 0,70 80 4,98

225 238 3,0 0,60 70 5,58

250 266 3,0 0,60 65 6,01


Variants :

FDA design - PUR HEAVY FDA,

resistent to microbes - PUR HEAVY AE


VENTIDUST UNI V2

VENTIDUST UNI VITON

VENTIDUST UNI V9

high temperature



Material :

UNI V2 hoses are manufactured of one layer of neoprene-coated glass-fber

fabric with an inner exposed spring steel spiral and outer glass fber cord. They

are universally applicable in the intermediate temperature range and can be laid in

closest areas (small bending radii). Also available with spiral-free sleeves (reduced

or extended).


-40°C to +220°C light green

Material :

UNI VITON hoses are manufactured of 2 layers of Viton coated glass-fber fabric

with an intermediate, shielded spring steel spiral and outer glass fber cord. They

are universally applicable in the intermediate temperature range. Good fow cha-

racteristics due to additional interior lining. They can be laid in closest areas (small

bending radii) and very fexible and lightweight. Good resistance to UV-radiation

and chemicals


-85°C to +310°C red

Material :

UNI V9 hoses are manufactured of 1 layer of silicone-coated glass-fber fabric

with inner exposed spring steel spiral and outer glass fber cord. They are

universally applicable for high-temperature and low-pressure applications. They

can be laid in closest areas (small bending radii), are kink-proof, very fexible and

lightweight. Also available with spiral-free sleeves (reduced or extended).

Use :

For the exhaust of air, gas, fumes, vehicle construction, aircraft construction, shipbuilding, mechanical engineering, air conditioning, IT equipment, chemical industry, hot air technolo-

gy, instrumentation and control, ventilation, as interconnecting tube, compensator and for cooling, UV-Dryer.

Use :

For the exhaust of cold/hot air and chemical fumes, vehicle construction, aircraft construction, shipbuilding, mechanical engineering, air conditioning, IT equipment, chemical industry,

instrumentation and control, ventilation, as interconnecting tube, for paint industry and drying technology.

Use :

For the exhaust of cold/hot air, gas and fumes, granulate dryers, aircraft construction, astronautics, vehicle construction, mechanical engineering, armored (military) cars. Hot-air and

cryoengineering, exhaust and weld fume exhaust, drying technology, car heating,UV-Dryer.

19 22 - 1,50 53

cca 0,5

x DN of

hose

0,08 4

25 29 - 1,40 53 0,12 4

32 35 - 1,40 50 0,13 4

38 41,5 - 1,40 50 0,17 4

51 55 - 1,20 44 0,25 4

63 67 - 1,10 40 0,30 4

70 74 - 1,10 35 0,39 4

76 80 - 1,00 35 0,41 4

102 106 - 0,90 26 0,57 4

127 132 - 0,80 17 0,81 4

152 157 - 0,60 14 1,1 4


Variants :

2 layer-design for granulates transport in plastic industry of for higher woring load - UNI M2, DIN 4102 B1 freproof design - UNI M2/L

19 22 - 2,80 65

cca 1 x

DN of

hose

0,19 4

25 30 - 2,80 65 0,23 4

32 36 - 2,70 60 0,28 4

38 43 - 2,60 60 0,31 4

51 56 - 2,60 52 0,36 4

63 68 - 2,40 45 0,49 4

70 75 - 2,10 44 0,54 4

76 81 - 2,10 43 0,58 4

102 107 - 1,90 35 0,77 4

127 133 - 1,40 23 0,93 4

152 158 - 1,20 17 1,20 4

203 209 - 0,70 9 1,65 4

254 260 - 0,50 7 2,10 4

305 311 - 0,30 5 2,61 4


19 22 - 1,80 58

cca 0,5

x DN of

hose

0,08 4

38 41,5 - 1,50 58 0,17 4

51 55 - 1,50 50 0,25 4

63 67 - 1,30 50 0,29 4

76 80 - 1,10 40 0,42 4

102 106 - 1,00 30 0,65 4

127 132 - 0,80 17 0,80 4

152 157 - 0,70 14 0,98 4

203 208 - 0,50 7 1,33 4

254 259 - 0,40 5 1,65 4

305 310 - 0,10 3 2,00 4


Variants :

2 layer-design for granulates transport in plastic industry of for higher woring load - UNI M9, 3 layer-design for granulates transport in plastic industry of for extreme applications - UNI M9/S,

design for fumes from welding - UNI M9/L

67

SUCTION HOSES


CLIMA LUX - SUPERLASTIC black

CLIMA HEATING - SPIRAFLEX P/L

CLIMA HEATING TR 300

air, dust and heating


0°C to +85°C black - white

Material : SUPERELASTIC hoses are manufactured of two PVC-layers with a sand-

wiched spring steel spiral and with additional axial and radial yarn reinforcement.

Smooth interior, extremely fexible and vacuum-resistant. Extremely fexible and

lightweight, tensile, good resistance to oil, bases and acids, good resistance to

chemicals, largely smooth interior, smallest bending radii, UV and ozone-resistant.

Cadmium-free.

Use : Household and industrial vacuum cleaners, boat building, caravans, textile

industry, ventilation technology, mechanical engineering, weld fume exhaust, cable

protection, drying of buildings.


-20°C to +100°C yellow with black spiral

Material : SPIRAFLEX P/L (lightweight type) hoses are manufactured of PVC-coated

polyamide fabric with an integrated spring steel spiral and outer scuff strips and

spiral-free connection sleeves at both ends. Large diameters allow high-volume

exhaust. Excellent compressibility ensures space-saving packing. As desired,

available with spiral-free end sleeves or end rings, hooks and eyes. Also available

without spiral.

Use : Such ventilation tubes are mostly used in connection with mobile fan heaters

for winter construction heating, cereal drying, hall and tent heating, stable ventila-

tion, weld fume exhaust, hot house heating and container cleaning.


-85°C to 310°C grey with black spiral

Material : TR 300 hoses are manufactured of one layer of a specially coated

thermo-fabric with sewed-on spring spiral and outer fre protection. The hose is

seamless and has a close spiral distance and an absolutely smooth interior (redu-

ced air resistance). Spiral-free sleeves at both ends. Asbestos-free.

Use : Heavy industry, glass manufacturing, fre departments, car manufacturing,

military garages, car safety standards authority stations, truck and car garages,

shipyards, refneries, disaster prevention, airport foor service.

25 31 - 1,70 40 25 0,22 15

28 34 - 1,60 35 28 0,24 15

32 38 - 1,50 30 32 0,27 15

35 41 - 1,40 30 35 0,34 15

38 44 - 1,40 30 35 0,37 15

41 47 - 1,40 30 41 0,40 15

51 57 - 1,30 28 51 0,49 15

63 69 - 1,00 25 63 0,61 15

76 83 - 0,80 18 76 0,85 15

89 96 - 0,80 17 89 0,98 15

102 109 - 0,80 15 102 1,15 15

120 128 - 0,60 11 120 1,34 15

125 133 - 0,60 11 125 1,43 15

152 160 - 0,55 11 152 1,65 15


Variants :

grey-white design - type , freproof design - type SUPERLASTIC grey SUPERLASTIC mushroom

152 150 - 3,00 3,5

cca 0,7

x DN of

hose

1,12

5 / 7,6

180 150 - 3,00 3,5 1,18

203 150 - 2,75 3,5 1,23

254 150 - 2,75 2,1 1,38

305 150 - 1,75 2,1 1,48

356 150 - 1,50 3,9 1,82

407 150 - 1,25 3,9 2,12

425 150 - 1,20 3,9 2,45

457 150 - 1,10 3,9 2,75

500 150 - 1,00 3,3 3,40

525 150 - 1,00 1,8 3,70

600 150 - 0,85 1,4 4,60

700 150 - 0,75 1,4 5,72

750 150 - 0,65 1,1 6,10


Variants :

design with stiftening - type SPIRAFLEX P/LS, design without steel spiral - type SPIRAFLEX SMOOT,

antistatic desisgn-black colour-type SPIRAFLEX ANTISTAT

100 50 -

on

demand

5,0

cca 1 x

DN of

hose

- 5

127 50 - 5,0 - 5

152 50 - 5,0 - 5

180 50 - 5,0 - 5

203 50 - 5,0 - 5

254 50 - 4,5 - 5

305 50 - 4,5 - 5

425 50 - 4,0 - 5

525 50 - 3,5 - 5

600 50 - 3,5 - 5

Variants :

design to max. temperature +250°C - HEATING TR 250,design to max. temperature +400°C - HEATING TR 400,design to max. temperature +500°C - HEATING TR 500, design to max. temperature +600°C - HEATING TR 600,

design to max. temperature +1000°C - HEATING TR 1000


CLIPFLEX PE 85°C

CLIPFLEX HYPALON 175°C

CLIPFLEX VITON 210°C

high temperature and chemical fumes


-40°C to +85°C white

Material :

PE hoses are manufactured of one layer of transparent PE-coated polyethylene

fabric with an outer special-steel spiral. Very environmentally compatible. No

acidic fumes generate at burning. Specially designed for aerology plants as an

environmentally compatible, economic alternative to PVC. To be fxed with the

Clipfex clip.

Use : Asbestos disposal, for the exhaust of cold/hot air and chemical fumes in

chemical industry, ventilation and air conditioning, special-purpose machinery,

paint industry.


-40°C to +175°C grey-green

Material :

HYPALON hoses are manufactured of 1 layer of red viton-coated Trevira fabric

with an outer special-steel spiral (on request also available in VA). Good chemical

resistance. Flame-resistant. To be fxed with the Clipfex clip. Klippfex hoses are

highly fexible and offer excellent axial compressibility properties.

Use :

Ventilation and air conditioning, special-purpose machinery, paint industry.


-25°C to +210°C red-grey

Material :

VITON hoses are manufactured of 1 layer of red viton-coated Trevira fabric with

an outer special-steel spiral (on request also available in VA). Good chemical

resistance. Flame-resistant. To be fxed with the clip. Clipfex hoses are highly

fexible and offer excellent axial compressibility properties.

Use :

Asbestos disposal, for the exhaust of cold/hot air and chemical fumes in chemical

industry, ventilation and air conditioning, special-purpose machinery, paint

industry.

50 - - 0,90 40

cca 0,8

x DN of

hose

0,40

3 / 6

60 - - 0,78 28 0,50

80 - - 0,61 16 0,70

90 - - 0,56 12 0,80

100 - - 0,51 10 0,90

125 - - 0,33 6,4 1,10

150 - - 0,22 4,4 1,40

180 - - 0,17 3,1 1,60

200 - - 0,14 2,5 1,80

225 - - 0,11 2 2,00

250 - - 0,10 1,6 2,20

275 - - 0,08 1,3 2,50

300 - - 0,07 1,1 2,70

350 - - 0,06 0,8 3,20

400 - - 0,05 0,6 3,60

50 - - 0,90 40

cca 0,8

x DN of

hose

0,40

3 / 6

60 - - 0,78 28 0,50

100 - - 0,51 10 0,90

125 - - 0,33 6,4 1,10

150 - - 0,22 4,4 1,40

200 - - 0,14 2,5 1,80

225 - - 0,11 2 2,00

250 - - 0,10 1,6 2,20

300 - - 0,07 1,1 2,70

350 - - 0,06 0,8 3,20

400 - - 0,05 0,6 3,60


Variants :

design with inner layer of transparent PTFE - HYPALON CHEMOCLIP,design with electrically conductive inner PTFE - HYPALON CHEMOCLIP EL

50 - - 0,90 40

0,8 x DN

of hose

0,40

3 / 6

60 - - 0,78 28 0,50

80 - - 0,61 16 0,70

90 - - 0,56 12 0,80

100 - - 0,51 10 0,90

125 - - 0,33 6,4 1,10

150 - - 0,22 4,4 1,40

180 - - 0,17 3,1 1,60

200 - - 0,14 2,5 1,80

225 - - 0,11 2,0 2,00

250 - - 0,10 1,6 2,20

275 - - 0,08 1,3 2,50

300 - - 0,07 1,1 2,70

350 - - 0,06 0,8 3,20

400 - - 0,05 0,6 3,60

69

SUCTION HOSES


CLIPFLEX PTFE 250°C

CLIPFLEX SILIKON 300°C

CLIPFLEX HIGH-TEMP

high temperature and chemical fumes


-150°C to +250°C light grey

Material :

CLIPFLEX TEFLON hoses are manufactured of 1 layer of light brown Tefon-coated

glass fabric with an outer special-steel spiral. Excellent chemical resistance.

Physiologically safe coating. No adhesion of media to the interior wall. To be fxed

with the Clipfex clip.

Use :

Chemical industry, ventilation and air conditioning, special-purpose machinery, paint industry.


-70°C to +300°C (+330°C short time) silver grey

Material :

S hoses are composed of 1 layer of silicone-coated glass fabric with an outer

special-steel spiral. Highly fexible, compressible, abrasion-resistant. For the

ventilation of cold/hot air.

Use :

For extreme temperature exposure and chemical stress, for hot air and hot steam

discharge, mechanical engineering, oven construction.


-20°C to +400°C (+450°C short time) silver

Material :

HIGH-TEMP hoses are manufactured of two layers of a heat-resistant special

fabric with an outer spiral of hot-galvanized special steel. Extremely fexible, good

compressibility. Abrasion protection by an outer spiral.

Use :

For extreme temperature exposure and chemical stress, for hot air and hot steam

discharge, mechanical engineering, oven construction.

50 - - 0,90 40,0

cca 0,8

x DN of

hose

0,40

3 / 6

60 - - 0,78 28,0 0,50

80 - - 0,61 15,6 0,70

90 - - 0,56 12,3 0,80

100 - - 0,51 10,0 0,90

125 - - 0,33 6,4 1,10

150 - - 0,22 4,4 1,40

180 - - 0,17 3,1 1,60

200 - - 0,14 2,5 1,80

225 - - 0,11 2,0 2,00

250 - - 0,10 1,6 2,20

275 - - 0,08 1,3 2,50

300 - - 0,07 1,1 2,70

350 - - 0,05 0,8 3,20

400 - - 0,04 0,6 3,60

50 - - 0,61 52

cca 0,8

x DN of

hose

0,50

3 / 6

60 - - 0,56 48 0,60

80 - - 0,42 40 0,80

90 - - 0,40 38 0,90

100 - - 0,38 37 1,00

125 - - 0,31 30 1,20

150 - - 0,25 22 1,30

180 - - 0,18 16 1,40

200 - - 0,15 13 1,60

225 - - 0,13 11 2,00

250 - - 0,10 8 2,10

275 - - 0,09 7 2,30

300 - - 0,06 5 2,40

350 - - 0,05 4 3,30

400 - - 0,04 3 3,80

50 - - 0,85 35,0 30 0,50

3 / 6

60 - - 0,68 25,0 36 0,60

100 - - 0,30 9,0 60 0,80

125 - - 0,21 6,0 75 1,00

150 - - 0,16 4,0 90 1,10

200 - - 0,10 2,2 120 1,50

225 - - 0,08 1,8 158 1,80

250 - - 0,07 1,5 175 2,00

275 - - 0,06 1,2 193 2,40

300 - - 0,05 1,0 210 2,60

350 - - 0,04 0,65 245 3,10

400 - - 0,03 0,55 280 3,90


Variants :

design to max. temperature +500°C - HIGH-TEMP 500,design to max. temperature +650°C - HIGH-TEMP 650,design to max. temperature +800°C - HIGH-TEMP 800,

design to max. temperature +1100°C - HIGH-TEMP 1100,


VINFLEX NEREZ

VINFLEX POZINK

VINFLEX NEREZ ECO

abrasive materials and hot air


-40°C to +600°C metal grey

Material :

Stainless steel 1.4301. More-edged profle from double bendedprofle, good

elasticity, high resistence to abrasion, high temperatures, corrosion, mechanic

strain, high frmness in pressure, traction and impact.

Use :

Pneutransport, exhaustion nad blowing of very hot waste products, smore, fume

and abrasive materials. Can be used as disconnecting element in exhaust systems

or as vibration compensator.



Material :

Zinced steel 1.0330. - ÈSN 734201:2002. More-edged profle from double

bendedprofle, good elasticity, high resistence to abrasion, high temperatures,

corrosion, mechanic strain. Hose has more large profle than type VINFLEX NEREZ.

Use : Pneutransport, exhaustion nad blowing of very hot waste products, smoke,

fume and abrasive materials. Can be used as disconnecting element in exhaust

systems or as vibration compensator.



Material :

Stainless steel 1.4301.-ÈSN 734201:2002. More-edged profle from double

bended profle, good elasticity, high resistence to abrasion, high temperatures,

corrosion, mechanic strain. Hose has more large profle than type VINFLEX NEREZ.

Use :

Exhaustion of very hot waste products, suitable as well for gas-, liquid- and frm

fuels - used namely as chimney inlay. Can be used for pneutransport, exhaustion

and blowing abrasive materials.

20 23,5 - - - 115 0,46 10

30 33,5 - - - 160 0,70 10

40 43,5 - - - 182 1,05 10

45 48,5 - - - 191 1,18 10

50 54 - - - 205 1,63 10

60 64 - - - 234 1,94 10

70 74 - - - 273 2,30 10

75 80 - - - 292 2,43 10

85 89 - - - 330 2,76 10

100 104 - - - 390 3,10 10

110 114 - - - 430 3,55 10

115 119 - - - 450 3,74 10

120 124 - - - 468 3,92 10

128 132 - - - 600 4,,21 10

130 134 - - - 620 5,08 10

140 144 - - - 780 5,48 10


20 23 - - - 115 0,46 10

30 33 - - - 160 0,70 10

40 43,5 - - - 182 1,05 10

50 54 - - - 205 1,63 10

60 64 - - - 234 1,94 10

70 74 - - - 273 2,30 10

100 104 - - - 390 3,25 10

104 108 - - - 410 3,39 10

110 114 - - - 430 3,55 10

115 119 - - - 450 3,74 10

120 124 - - - 468 3,92 10

125 129 - - - 550 4,06 10

130 134 - - - 620 5,08 10

140 144 - - - 780 5,48 10

153,5 157,5 - - - 980 6,20 10

205 209 - - - 1580 8,00 10


100 104 2,0 - - - 1,44 21

110 114 2,0 - - - 1,58 21

120 124 2,0 - - - 1,72 21

125 129 2,0 - - - 1,79 21

130 134 2,0 - - - 1,86 21

140 144 2,0 - - - 2,01 21

150 154 2,0 - - - 2,15 21

160 164 2,0 - - - 2,29 21

170 174 2,0 - - - 2,43 21

180 184 2,0 - - - 2,57 21

190 194 2,0 - - - 2,71 21

200 204 2,0 - - - 2,85 21

220 224 2,0 - - - 3,13 21

250 254 2,0 - - - 3,55 21

270 274 2,0 - - - 3,83 21

300 304 2,0 - - - 4,26 21


HOSE COUPLINGSINDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS TECHNICAL SHEETS

STORZ COUPLINGS

STORZ hose coupling

STORZ - female thread

STORZ – female thread, swivel

All types are available with D (only for delivery) or DS (for suction and delivery) gaskets

Storz couplings are symmetrical couplings with a bayonet locking system which is protected by a collar. These couplings also have a gasket which can be easily changed.

The size of the Storz is determined by the lug distance. To close the suction- and discharge hose you can use a plug, these plugs have a chain to avoid losing the plug.

Material : INOX 316, ALU, Bronze

The couplings are female- and/or male threaded (according to DIN ISO 228). The assembly on a hose is made by a Storz with a ribbed hose tail.

WP MATERIAL

PN 16 bar ALU =>NBR, BRASS =>NBR, SS =>VITON/PTFE

SIZE KA (mm) D (mm) L (mm)

25 31 13 53

38 52 38 90

C-25 66 38 90

C-52 66 42 90

C-52 66 45 90

C-52 66 52 90

65 81 65 100

B-75 89 75 125

B-75 89 80 125

90 105 90 160

100 115 100 150

A-110 133 100 170

A-110 133 110 170

Other sizes on request (25 - 250)

SIZE KA (mm) IG (mm) MATERIAL

D-25 31 G 1” Alu

38 52 G 1 1/4” Alu

C-52 66 G 1 1/2” Alu

C-52 66 G 2” Alu

65 81 G 1 1/2” Alu

B-75 89 G 2” Alu

B-75 89 G 2 1/2” Alu

B-75 89 G 3” Alu

90 105 G 3” Alu

100 115 G 4” Alu

A-110 133 G 3” Alu

A-110 133 G 4” Alu


SIZE KA (mm) IG (mm) MATERIAL

D-25 31 G 1” Alu

C-52 66 G 1” Alu

C-52 66 G 1 1/4” Alu

C-52 66 G 1 1/2” Alu

C-52 66 G 2” Alu

65 81 G 2” Alu

65 81 G 2 1/2” Alu

B-75 89 G 2” Alu

B-75 89 G 2 1/2” Alu

B-75 89 G 3” Alu

100 115 G 4” Alu

A-110 133 G 4” Alu


73

HOSE COUPLINGS


STORZ - male thread

STORZ - male thread, swivel

STORZ Gasket

STORZ Dustcap


SIZE KA (mm) AG (mm) MATERIAL

D-25 31 G 3/4” Alu

D-25 31 G 1” Alu

C-52 66 G 2” Alu

62 81 G 1 1/2” Alu

62 81 G 2” Alu

62 81 G 2 1/2” Alu

B-75 89 G 2” Alu

B-75 89 G 2 1/2” Alu

B-75 89 G 3” Alu

A-110 133 G 4” Alu


SIZE KA (mm) AG (mm) MATERIAL

D-25 31 G 1” Alu

38 52 G 1 1/4” Alu

C-52 66 G 1 1/2” Alu

C-52 66 G 2” Alu

65 81 G 2 1/2” Alu

B-75 89 G 2” Alu

B-75 89 G 2 1/2” Alu

B-75 89 G 3” Alu

90 105 G 3” Alu

100 115 G 4” Alu

A-110 133 G 4” Alu

A-110 133 G 4 1/2” Alu


NA SIZE A x D x H MATERIAL

D-25 29x18x9 Silikon

38 49x32x9,8 Silikon

C-52 64x47x10 Silikon

65 79x60x10 Silikon

B-75 87x67x10,5 Silikon

90 103x93x10 Silikon

100 113x93x10 Silikon

A-110 130x102x12 Silikon


We supply also in NBR black or white, Viton

SIZE KA (mm) MATERIAL

D-25 31 Alu

38 52 Alu

C-52 66 Alu

65 81 Alu

B-75 89 Alu

90 105 Alu

100 115 Alu

A-110 133 Alu


We supply in Aluminium, brass, stainless steel


FEMALE THREADED FLANGE - PN 16

MALE THREADED FLANGE - PN 16

STORZ WITH FLANGE

STORZ REDUCTION


SIZE IG D Lk

25 G 1” 115 85 (4x14)

50 G 2” 165 125 (4x18)

65 G 2 1/2” 185 145 (4x18)

80 G 2 1/2” 200 160 (8x18)

100 G 4” 220 180 (8x18)

150 G 5” 285 240 (8x22)


SIZE AG D Lk

25 G 1” 115 85 (4x14)

32 G 1 1/2” 140 100 (4x18)

40 G 2” 150 110 (4x18)

50 G 2” 165 125 (4x18)

65 G 2 1/2” 185 145 (4x18)

80 G 2 1/2” 200 160 (8x18)

100 G 4” 220 180 (8x18)

100 G 4 1/2” 220 180 (8x18)

125 G 5” 250 210 (8x18)

150 G 6” 285 240 (8x22)

200 G 8” 340 295 (8x22)



D- DN 25 31 Alu

C- DN 50 66 Alu

65- DN 65 81 Alu

B- DN 65 89 Alu

B- DN 80 89 Alu

100- DN 100 115 Alu

A- DN 100 133 Alu




C-D 66-31 Alu

65-C 81-66 Alu

B-C 89-66 Alu

B-65 89-81 Alu

A-C 133-66 Alu

A-B 133-89 Alu

A-100 133-115 Alu



75

HOSE COUPLINGS


TANKWAGEN EN14420-6 (DIN28450)

TANKWAGEN EN 14420-6 (DIN 28450) VK

TANKWAGEN EN 14420-6 (DIN 28450) MK

TANKWAGEN EN 14420-6 (DIN 28450) VB

TANKWAGEN EN 14420-6 (DIN 28450) MB

The TW EN14420-6 (DIN28450) are couplings, which you can connect 2 elements in an easy and secure way. The female part (MK) a coupling nut with lever and crown can be connec-

ted to male part (VK). When the coupling nut is turned, the 2 hooks are connected to the adapter, when you push down the handle you will have a leak free connection. The European

Comity for Normalisation (CEN) has decided in 1973 that the TW coupling in Ø ID 100 mm have to have 3 hooks. This is the norm for Tank trucks and train wagons.The TW couplings

are conform EN14420-6 (DIN 28450, BS2464.3) with a working pressure of 16 bars. The types are VK /MK / VB and MB and available in the sizes DN50-2” / DN80-3” and DN100-4”.

Also available are female and male threaded hose shanks and Safety clamps. The TW couplings are used for charge and discharge of petroleum, chemical products etc.

WP NORM MATERIAL

PN 16 bar DIN 28450 Alu => NBR / Forged Brass => NBR / SS316 => HYPALON

TYPE Art. Nr SIZE MATERIAL WEIGHT (kg)

VK 050 SS 005099 1 1/2” SS316 0,37

VK 050 SS 005100 2” SS316 0,32

VK 080 SS 005101 3” SS316 0,70

VK 100 SS 005102 4” SS316 1,13

VK 050 MS 005098 1 1/2” MS 0,39

VK 050 MS 005103 2” MS 0,34

VK 080 MS 005104 3” MS 0,78

VK 100 MS 005105 4” MS 1,10

VK 050 Alu 005106 2” Alu 0.11

VK 080 Alu 005107 3” Alu 0.26


MK 050 SS 005110 2” SS316 0,64

MK 080 SS 005111 3” SS316 1,39

MK 100 SS 005112 4” SS316 2,41

MK 050 MS 005113 2” MS 0,70

MK 080 MS 005114 3” MS 1,54

MK 100 MS 005115 4” MS 2,71


MB 050 SS 005210 2” SS316 0,33

MB 080 SS 005211 3” SS316 0,77

MB 100 SS 005212 4” SS316 1,19

MB 050 MS 005213 2” MS 0,35

MB 080 MS 005214 3” MS 1,05

MB 100 MS 005215 4” MS 1,38

MB 050 Alu 005216 2” Alu 0,12

MB 080 Alu 005217 3” Alu 0,30

MB 100 Alu 005218 4” Alu 0,46


VB 050 SS 005200 2” SS316 0,29

VB 080 SS 005201 3” SS316 0,72

VB 100 SS 005202 4” SS316 1,15

VB 050 MS 005203 2” MS 0,41

VB 080 MS 005204 3” MS 0,63

VB 100 MS 005205 4” MS 1,25

VB 050 Alu 005206 2” Alu 0,14

VB 080 Alu 005207 3” Alu 0,27

VB 100 Alu 005208 4” Alu 0,40

VB 050 PP 005197 2” Polypropylen 0,04



MK 080 SS is also available with security lock


TANKWAGEN GA – male hose couplings

TANKWAGEN GI - female hose couplings

TANKWAGEN EN14420-6 (DIN 28450) lip seal

TANKWAGEN EN14420-6 (DIN 28450) fat seal

TYPE Art. Nr SIZE MATERIAL

GA 015 SS 005298 1/2” SS316

GA 019 SS 005299 3/4” SS316

GA 025 SS 005300 1” SS316

GA 032 SS 005301 1 1/4” SS316

GA 038 SS 005302 1 1/2” SS316

GA 050 SS 005303 2” SS316

GA 075 SS 005304 3” SS316

GA 080 SS 005306 3” SS316

GA 100 SS 005305 4” SS316

GA 019 MS 005310 3/4” MS

GA 025 MS 005311 1” MS

GA 032 MS 005312 1 1/4” MS

GA 035 MS 005307 1 1/2” MS

GA 038 MS 005313 1 1/2” MS

GA 050 MS 005314 2” MS

GA 075 MS 005315 3” MS

GA 080 MS 005317 3” MS

GA 100 MS 005316 4” MS



GI 025 SS 005400 1” SS316

GI 038 SS 005401 1 1/2” SS316

GI 050 SS 005402 2” SS316

GI 075 SS 005403 3” SS316

GI 019 MS 005410 3/4” MS

GI 025 MS 005411 1” MS

GI 032 MS 5412 1 1/4” MS

GI 032/2 MS 5409 2” MS

GI 035 MS 5407 1 1/2” MS

GI 038 MS 5413 1 1/2” MS

GI 038/2 MS 5408 2” MS

GI 050 MS 5414 2” MS

GI 075 MS 5417 3” MS



CSM 050 005635 2” HYPALON (CSM)


NBR 050 005605 2” PERBUNAN (NBR)


FPM 050 005615 2” VITON (FPM)

FPM 080 005617 3” VITON (FPM)

EPDM 050 005625 2” EPDM

EPDM 080 005627 3” EPDM






FPM 050 005715 2” VITON (FPM)

FPM 080 005717 3” VITON (FPM)

PTFE 050 005845 2” Tefon ( PTFE)

PTFE 080 005847 3” Tefon ( PTFE)

77

HOSE COUPLINGS


TW EN14420-3 (DIN 2817) Safety Clamp

RUBBER EXPANSION JOINT NBR DIN / TW3

REDUCING NIPPLES MALE X FEMALE – G, BSP acc. DIN ISO 228

Pressure 10 bar, temperature -30°C / +90°C


SC 013 Alu 005509 DN 13 Alu 0,10

SC 019 Alu 005510 DN 19 Alu 0,10

SC 025 Alu 005511 DN 25 Alu 0,10

SC 032 Alu 005512 DN 32 Alu 0,10

SC 038 Alu 005513 DN 38 Alu 0,20

SC 050 Alu 005514 DN 50 Alu 0,30

SC 063 Alu 005515 DN 63 Alu 0,40

SC 075 Alu 005518 DN 75 Alu 0,50

SC 080 Alu 005516 DN 80 Alu 0,50

SC 100 Alu 005517 DN 100 Alu 1,10

SC 025 SS 0005541 DN 25 SS316 0,25

SC 038 SS 005543 DN 38 SS316 0,43

SC 050 SS 005544 DN 50 SS316 0,60

SC 075 SS 005546 DN 75 SS316 0,90

SC 100 SS 005548 DN 100 SS316 1,40


TYPE Art. Nr SIZE FLANGE TW3 (mm) WEIGHT (kg)

ERV 050 TW 10TW050 2” 130 / 8x11,5 1,21

ERV 080 TW 10TW080 3” 154 / 8x11,5 1,35

ERV 100 TW 10TW100 4” 174 / 8x14,0 1,65

TYPE MATERIAL IG AG

RS 1 x 3/4 MS 1” 3/4”

RS 1 x 11/4 MS 1” 11/4”

RS 11/4 x 1 MS 11/4” 1”

RS 11/4 x 11/2 MS 11/4” 11/2”

RS 11/4 x 2 MS 11/4” 2”

RS 11/2 x 2 MS 11/2” 2”

RS 11/2 x 21/2 MS 11/2” 21/2”

RS 2 x 11/2 MS 2” 11/2”

RS 2 x 3 MS 2” 3”

RS 21/2 x 3 MS 21/2” 3”

RS 3 x 2 MS 3” 2”

RS 31/2 x 3 MS 31/2” 3”

RS 3 x 4 MS 3” 4”

RS 4 x 3 MS 4” 3”

RS 1 x 3/4 SS316 1” 3/4”

RS 1 x 11/4 SS316 1” 11/4”

RS 11/4 x 1 SS316 11/4” 1”

RS 11/4 x 11/2 SS316 11/4” 11/2”

RS 11/4 x 2 SS316 11/4” 2”

RS 11/2 x 2 SS316 11/2” 2”

RS 11/2 x 21/2 SS316 11/2” 21/2”

RS 2 x 11/2 SS316 2” 11/2”

RS 2 x 3 SS316 2” 3”

RS 21/2 x 3 SS316 21/2” 3”

RS 3 x 2 SS316 3” 2”

RS 31/2 x 3 SS316 31/2” 3”

RS 3 x 4 SS316 3” 4”

RS 4 x 3 SS316 4” 3”



REDUCING NIPPLES MALE X MALE – G, BSP acc. DIN ISO 228

DOUBLE NIPPLES MALE X MALE – G, BSP acc. DIN ISO 228

TYPE MATERIAL G1 G2

RN 3/4 x 1 MS 3/4” 1”

RN 1 x 11/4 MS 1” 11/4”

RN 1 x 11/2 MS 1” 11/2”

RN 1 x 2 MS 1” 2”

RN 11/4 x 11/2 MS 11/4” 11/2”

RN 11/4 x 2 MS 11/4” 2”

RN 11/2 x 2 MS 11/2” 2”

RN 2 x 21/2 MS 2” 21/2”

RN 2 x 3 MS 2” 3”

RN 3 x 4 MS 3” 4”

RN 3 x 51/2 MS 3” 51/2”

RN 4 x 51/2 MS 4” 51/2”

RN 3/4 x 1 SS316 3/4” 1”

RN 1 x 11/4 SS316 1” 11/4”

RN 1 x 11/2 SS316 1” 11/2”

RN 1 x 2 SS316 1” 2”

RN 11/4 x 11/2 SS316 11/4” 11/2”

RN 11/4 x 2 SS316 11/4” 2”

RN 11/2 x 2 SS316 11/2” 2”

RN 2 x 21/2 SS316 2” 21/2”

RN 2 x 3 SS316 2” 3”

RN 3 x 4 SS316 3” 4”

RN 3 x 51/2 SS316 3” 51/2”

RN 4 x 51/2 SS316 4” 51/2”


TYPE MATERIAL G1 G2

DN 1/2 MS MS 1/2” 1/2”

DN 3/4 MS MS 3/4” 3/4”

DN 1” MS MS 1” 1”

DN 11/4” MS MS 11/4” 11/4”

DN 11/2” MS MS 11/2” 11/2”

DN 2” MS 2” 2”

DN 21/2” MS 21/2” 21/2”

DN 3” MS 3” 3”

DN 4” MS 4” 4”

DN 1/2 SS316 1/2” 1/2”

DN 3/4 SS316 3/4” 3/4”

DN 1” SS316 1” 1”

DN 11/4” SS316 11/4” 11/4”

DN 11/2” SS316 11/2” 11/2”

DN 2” SS316 2” 2”

DN 21/2” SS316 21/2” 21/2”

DN 3” SS316 3” 3”

DN 4” SS316 4” 4”


79

HOSE COUPLINGS


RAKLOK COUPLINGS

RAKLOK TYPE A

The Raklok couplings are a-symmetrical. They are used to make a connection between hoses and/ or pipes, also from a fxed point of an installation to a tank-truck. The connection is

produced when you put the adapter into the coupler and push the handles of the coupler down. This how you get a good connection in a moment.

Pressure rates chart (bar)

SIZE 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6”

MATERIAL 13 19 25 32 38 50 65 75 100 125 150

Forged Brass 24 24 24 24 24 24 17 17 7 - -

Bronze 17 17 17 17 17 17 10 10 7 5 5

Aluminium 17 17 17 17 17 17 10 10 7 5 5

SS316 316 17 17 17 17 17 17 14 14 10 5 5

PP - 7 7 7 7 7 - - - - -

NORM MATERIAL

MIL Alu => NBR / MS => NBR / SS316 => NBR

DIN Alu => NBR /PU MS => NBR / PU SS316 => NBR / PTFE


A050 Alu 004100 G 1/2” Alu 0,02

A075 Alu 004101 G 3/4” Alu 0,03

A100 Alu 004102 G 1” Alu 0,05

A125 Alu 004103 G 1 1/4” Alu 0,06

A150 Alu 004104 G 1 1/2” Alu 0,10

A200 Alu 004105 G 2” Alu 0,15

A250 Alu 004106 G 2 1/2” Alu 0,28

A300 Alu 004107 G 3” Alu 0,27

A400 Alu 004108 G 4” Alu 0,50

A500 Alu 004109 G 5” Alu 0,67

A600 Alu 004110 G 6” Alu 0,85

A050 MS 004120 G 1/2” MS 0,07

A075 MS 004121 G 3/4” MS 0,12

A100 MS 004122 G 1” MS 0,16

A125 MS 004123 G 1 1/4” MS 0,25

A150 MS 004124 G 1 1/2” MS 0,33

A200 MS 004125 G 2” MS 0,47

A250 MS 004126 G 2 1/2” MS 0,77

A300 MS 004127 G 3” MS 0,95

A400 MS 004128 G 4” MS 1,69

A500 MS 004129 G 5” MS 2,18

A600 MS 004130 G 6” MS 4,27

A050 PP 004131 G 1/2” PP -

A075 PP 004132 G 3/4” PP -

A100 PP 004133 G 1” PP -

A125 PP 004134 G 1 1/4” PP -

A150 PP 004135 G 1 1/2” PP -

A200 PP 004136 G 2” PP -

A300 PP 004137 G 3” PP -

A400 PP 004138 G 4” PP -

A 050 SS 004139 G 1/2” - 3/4” SS316 0,10

A050 SS 004140 G 1/2” SS316 0,08

A075 SS 004141 G 3/4” SS316 0,10

A100 SS 004142 G 1” SS316 0,14

A125 SS 004143 G 1 1/4” SS316 0,21

A150 SS 004144 G 1 1/2” SS316 0,28

A200 SS 004145 G 2” SS316 0,39

A250 SS 004146 G 2 1/2” SS316 0,79

A300 SS 004147 G 3” SS316 0,82

A400 SS 004148 G 4” SS316 1,25

A500 SS 004149 G 5” SS316 1,84

A600 SS 004150 G 6” SS316 2,82

Also available with NPT thread


RAKLOK TYPE B


B050 Alu 004200 G 1/2” Alu 0,08

B075 Alu 004201 G 3/4” Alu 0,09

B100 Alu 004202 G 1” Alu 0,14

B125 Alu 004203 G 1 1/4” Alu 0,27

B150 Alu 004204 G 1 1/2” Alu 0,31

B200 Alu 004205 G 2” Alu 0,37

B250 Alu 004206 G 2 1/2” Alu 0,48

B300 Alu 004207 G 3” Alu 0,65

B400 Alu 004208 G 4” Alu 0,84

B500 Alu 004209 G 5” Alu 1,08

B600 Alu 004210 G 6” Alu 1,96

B050 MS 004220 G 1/2” MS 0,17

B075 MS 004221 G 3/4” MS 0,23

B100 MS 004222 G 1” MS 0,30

B125 MS 004223 G 1 1/4” MS 0,52

B150 MS 004224 G 1 1/2” MS 0,64

B200 MS 004225 G 2” MS 0,94

B250 MS 004226 G 2 1/2” MS 1,06

B300 MS 004227 G 3” MS 1,37

B400 MS 004228 G 4” MS 2,22

B500 MS 004229 G 5” MS 3,32

B600 MS 004230 G 6” MS 3,84

B050 PP 004231 G 1/2” PP -

B075 PP 004232 G 3/4” PP -

B100 PP 004233 G 1” PP -

B125 PP 004234 G 1 1/4” PP -

B150 PP 004235 G 1 1/2” PP -

B200 PP 004236 G 2” PP -

B300 PP 004237 G 3” PP -

B400 PP 004238 G 4” PP -

B050 SS 004239 G 1/2” - 3/4” SS316 0,16

B050 SS 004240 G 1/2” SS316 0,13

B075 SS 004241 G 3/4” SS316 0,18

B100 SS 004242 G 1” SS316 0,27

B125 SS 004243 G 1 1/4” SS316 0,47

B150 SS 004244 G 1 1/2” SS316 0,55

B200 SS 004245 G 2” SS316 0,67

B250 SS 004246 G 2 1/2” SS316 0,96

B300 SS 004247 G 3” SS316 1,34

B400 SS 004248 G 4” SS316 1,86

B500 SS 004249 G 5” SS316 2,36

B600SS 004250 G 6” SS316 3,33


81

HOSE COUPLINGS


RAKLOK TYPE C


C050 Alu 004300 G 1/2” Alu 0,08

C075 Alu 004301 G 3/4” Alu 0,11

C100 Alu 004302 G 1” Alu 0,16

C125 Alu 004303 G 1 1/4” Alu 0,30

C150 Alu 004304 G 1 1/2” Alu 0,38

C200 Alu 004305 G 2” Alu 0,49

C250 Alu 004306 G 2 1/2” Alu 0,60

C300 Alu 004307 G 3” Alu 0,86

C400 Alu 004308 G 4” Alu 1,17

C500 Alu 004309 G 5” Alu 1,68

C600 Alu 004310 G 6” Alu 2,40

C050 MS 004320 G 1/2” MS 0,17

C075 MS 004321 G 3/4” MS 0,24

C100 MS 004322 G 1” MS 0,39

C125 MS 004323 G 1 1/4” MS 0,64

C150 MS 004324 G 1 1/2” MS 0,81

C200 MS 004325 G 2” MS 1,00

C250 MS 004326 G 2 1/2” MS 1,23

C300 MS 004327 G 3” MS 2,18

C400 MS 004328 G 4” MS 3,85

C500 MS 004329 G 5” MS 5,01

C600 MS 004330 G 6” MS 6,90

C050 PP 004331 G 1/2” PP -

C075 PP 004332 G 3/4” PP -

C100 PP 004333 G 1” PP -

C125 PP 004334 G 1 1/4” PP -

C150 PP 004335 G 1 1/2” PP -

C200 PP 004336 G 2” PP -

C300 PP 004337 G 3” PP -

C400 PP 004338 G 4” PP -

C050 SS 004340 G 1/2” SS316 0,13

C075 SS 004341 G 3/4” SS316 0,20

C100 SS 004342 G 1” SS316 0,30

C125 SS 004343 G 1 1/4” SS316 0,47

C150 SS 004344 G 1 1/2” SS316 0,60

C200 SS 004345 G 2” SS316 0,84

C250 SS 004346 G 2 1/2” SS316 1,24

C300 SS 004347 G 3” SS316 1,69

C400 SS 004348 G 4” SS316 2,39

C500 SS 004349 G 5” SS316 3,25

C600 SS 004350 G 6” SS316 4,90


RAKLOK TYPE D


D050 Alu 004400 G 1/2” Alu 0,08

D075 Alu 004401 G 3/4” Alu 0,10

D100 Alu 004402 G 1” Alu 0,15

D125 Alu 004403 G 1 1/4” Alu 0,27

D150 Alu 004404 G 1 1/2” Alu 0,33

D200 Alu 004405 G 2” Alu 0,41

D250 Alu 004406 G 2 1/2” Alu 0,51

D300 Alu 004407 G 3” Alu 0,73

D400 Alu 004408 G 4” Alu 0,97

D500 Alu 004409 G 5” Alu 1,43

D600 Alu 004410 G 6” Alu 1,69

D050 MS 004420 G 1/2” MS 0,17

D075 MS 004421 G 3/4” MS 0,21

D100 MS 004422 G 1” MS 0,35

D125 MS 004423 G 1 1/4” MS 0,52

D150 MS 004424 G 1 1/2” MS 0,68

D200 MS 004425 G 2” MS 0,83

D250 MS 004426 G 2 1/2” MS 1,13

D300 MS 004427 G 3” MS 1,89

D400 MS 004428 G 4” MS 2,47

D500 MS 004429 G 5” MS 3,91

D600 MS 004430 G 6” MS 4,43

D050 PP 004431 G 1/2” PP -

D075 PP 004432 G 3/4” PP -

D100 PP 004433 G 1” PP -

D125 PP 004434 G 1 1/4” PP -

D150 SS 004435 G 1 1/2” PP -

D200 PP 004436 G 2” PP -

D300 PP 004437 G 3” PP -

D400 PP 004438 G 4” PP -

D050 SS 004439 G 1/2” - 3/4” SS316 0,18

D050 SS 004440 G 1/2” SS316 0,15

D075 SS 004441 G 3/4” SS316 0,19

D100 SS 004442 G 1” SS316 0,28

D125 SS 004443 G 1 1/4” SS316 0,46

D150 SS 004444 G 1 1/2” SS316 0,60

D200 SS 004445 G 2” SS316 0,80

D250 SS 004446 G 2 1/2” SS316 0,94

D300 SS 004447 G 3” SS316 1,38

D400 SS 004448 G 4” SS316 2,13

D500 SS 004449 G 5” SS316 2,83

D600 SS 004450 G 6” SS316 4,14


83

HOSE COUPLINGS


RAKLOK TYPE E


E050 Alu 004500 G 1/2” Alu 0,03

E075 Alu 004501 G 3/4” Alu 0,05

E100 Alu 004502 G 1” Alu 0,06

E125 Alu 004503 G 1 1/4” Alu 0,12

E150 Alu 004504 G 1 1/2” Alu 0,19

E200 Alu 004505 G 2” Alu 0,29

E250 Alu 004506 G 2 1/2” Alu 0,41

E300 Alu 004507 G 3” Alu 0,57

E400 Alu 004508 G 4” Alu 0,88

E500 Alu 004509 G 5” Alu 1,24

E600 Alu 004510 G 6” Alu 1,54

E050 MS 004520 G 1/2” MS 0,12

E075 MS 004521 G 3/4” MS 0,20

E100 MS 004522 G 1” MS 0,34

E125 MS 004523 G 1 1/4” MS 0,41

E150 MS 004524 G 1 1/2” MS 0,54

E200 MS 004525 G 2” MS 0,79

E250 MS 004526 G 2 1/2” MS 1,34

E300 MS 004527 G 3” MS 1,69

E400 MS 004528 G 4” MS 3,11

E500 MS 004529 G 5” MS 4,68

E600 MS 004530 G 6” MS 5,57

E050 PP 004531 G 1/2” PP -

E075 PP 004532 G 3/4” PP -

E100 PP 004533 G 1” PP -

E125 PP 004534 G 1 1/4” PP -

E150 PP 004535 G 1 1/2” PP -

E200 PP 004536 G 2” PP -

E250 PP 004537 G 2 1/2” PP -

E300 PP 004538 G 3” PP -

E400 PP 004539 G 4” PP -

E050 SS 004540 G 1/2” SS316 0,09

E075 SS 004541 G 3/4” SS316 0,16

E100 SS 004542 G 1” SS316 0,28

E125 SS 004543 G 1 1/4” SS316 0,31

E150 SS 004544 G 1 1/2” SS316 0,45

E200 SS 004545 G 2” SS316 0,67

E250 SS 004546 G 2 1/2” SS316 1,06

E300 SS 004547 G 3” SS316 1,47

E400 SS 004548 G 4” SS316 2,15

E500 SS 004549 G 5” SS316 2,99

E600 SS 004550 G 6” SS316 4,76


RAKLOK TYPE F


F050 Alu 004600 G 1/2” Alu 0,03

F075 Alu 004301 G 3/4” Alu 0,05

F100 Alu 004002 G 1” Alu 0,08

F125 Alu 003703 G 1 1/4” Alu 0,13

F150 Alu 003404 G 1 1/2” Alu 0,16

F200 Alu 003105 G 2” Alu 0,22

F250 Alu 002806 G 2 1/2” Alu 0,35

F300 Alu 002507 G 3” Alu 0,49

F400 Alu 002208 G 4” Alu 0,83

F500 Alu 001909 G 5” Alu 0,91

F600 Alu 001610 G 6” Alu 1,00

F050 MS 004620 G 1/2” MS 0,11

F075 MS 004621 G 3/4” MS 0,17

F100 MS 004622 G 1” MS 0,23

F125 MS 004623 G 1 1/4” MS 0,32

F150 MS 004624 G 1 1/2” MS 0,45

F200 MS 004625 G 2” MS 0,64

F250 MS 004626 G 2 1/2” MS 0,88

F300 MS 004627 G 3” MS 1,26

F400 MS 004628 G 4” MS 2,26

F500 MS 004629 G 5” MS 2,81

F600 MS 004630 G 6” MS 3,35

F050 PP 004631 G 1/2” PP -

F075 PP 004632 G 3/4” PP -

F100 PP 004633 G 1” PP -

F125 PP 004634 G 1 1/4” PP -

F150 PP 004635 G 1 1/2” PP -

F200 PP 004636 G 2” PP -

F250 PP 004637 G 2 1/2” PP -

F300 PP 004638 G 3” PP -

F400 PP 004639 G 4” PP -

F050 SS 004639 G 1/2” SS316 0,16

F050 SS 004640 G 1/2” SS316 0,11

F075 SS 004641 G 3/4” SS316 0,17

F100 SS 004642 G 1” SS316 0,25

F125 SS 004643 G 1 1/4” SS316 0,36

F150 SS 004644 G 1 1/2” SS316 0,47

F200 SS 004645 G 2” SS316 0,62

F250 SS 004646 G 2 1/2” SS316 0,87

F300 SS 004647 G 3” SS316 1,27

F400 SS 004648 G 4” SS316 2,08

F500 SS 004649 G 5” SS316 2,95

F600 SS 004650 G 6” SS316 3,80


85

HOSE COUPLINGS


RAKLOK TYPE DC


DC050 Alu 004800 G 1/2” Alu 0,08

DC075 Alu 004801 G 3/4” Alu 0,09

DC100 Alu 004802 G 1” Alu 0,17

DC125 Alu 004803 G 1 1/4” Alu 0,25

DC150 Alu 004804 G 1 1/2” Alu 0,30

DC250 Alu 004805 G 2” Alu 0,37

DC200 Alu 004806 G 2 1/2” Alu 0,44

DC300 Alu 004807 G 3” Alu 0,60

DC400 Alu 004808 G 4” Alu 0,76

DC500 Alu 004809 G 5” Alu 0,85

DC600 Alu 004810 G 6” Alu 1,46

DC050 MS 004820 G 1/2” MS 0,17

DC075 MS 004821 G 3/4” MS 0,19

DC100 MS 004822 G 1” MS 0,31

DC125 MS 004823 G 1 1/4” MS 0,49

DC150 MS 004824 G 1 1/2” MS 0,63

DC250 MS 004825 G 2” MS 0,76

DC200 MS 004826 G 2 1/2” MS 1,01

DC300 MS 004827 G 3” MS 1,28

DC400 MS 004828 G 4” MS 2,08

DC500 MS 004829 G 5” MS 2,85

DC600 MS 004830 G 6” MS 3,64

DC075 PP 004832 G 3/4” PP -

DC100 PP 004833 G 1” PP -

DC150 PP 004835 G 1 1/2” PP -

DC200 PP 004836 G 2” PP -

DC300 PP 004837 G 3” PP -

DC400 PP 004838 G 4” PP -

DC050 SS 004840 G 1/2” SS316 0,13

DC075 SS 004841 G 3/4” SS316 0,18

DC100 SS 004842 G 1” SS316 0,26

DC125 SS 004843 G 1 1/4” SS316 0,44

DC150 SS 004844 G 1 1/2” SS316 0,50

DC250 SS 004845 G 2” SS316 0,56

DC200 SS 004846 G 2 1/2” SS316 0,89

DC300 SS 004847 G 3” SS316 1,20

DC400 SS 004848 G 4” SS316 1,62

DC500 SS 004849 G 5” SS316 2,12

DC600 SS 004850 G 6” SS316 4,28


RAKLOK TYPE DP


DP050 Alu 004700 G 1/2” Alu 0,02

DP075 Alu 004701 G 3/4” Alu 0,03

DP100 Alu 004702 G 1” Alu 0,05

DP125 Alu 004703 G 1 1/4” Alu 0,06

DP150 Alu 004704 G 1 1/2” Alu 0,09

DP200 Alu 004705 G 2” Alu 0,16

DP250 Alu 004706 G 2 1/2” Alu 0,22

DP300 Alu 004707 G 3” Alu 0,29

DP400 Alu 004708 G 4” Alu 0,43

DP500 Alu 004709 G 5” Alu 0,52

DP600 Alu 004710 G 6” Alu 0,75

DP050 MS 004720 G 1/2” MS 0,08

DP075 MS 004721 G 3/4” MS 0,09

DP100 MS 004722 G 1” MS 0,15

DP125 MS 004723 G 1 1/4” MS 0,22

DP150 MS 004724 G 1 1/2” MS 0,33

DP200 MS 004725 G 2” MS 0,46

DP250 MS 004726 G 2 1/2” MS 0,57

DP300 MS 004727 G 3” MS 0,84

DP400 MS 004728 G 4” MS 1,96

DP500 MS 004729 G 5” MS 2,31

DP600 MS 004730 G 6” MS 2,55

DP075 PP 004732 G 3/4” PP -

DP100 PP 004733 G 1” PP -

DP150 PP 004735 G 1 1/2” PP -

DP200 PP 004736 G 2” PP -

DP300 PP 004737 G 3” PP -

DP400 PP 004738 G 4” PP -

DP050 SS 004740 G 1/2” SS316 0,06

DP075 SS 004741 G 3/4” SS316 0,08

DP100 SS 004742 G 1” SS316 0,12

DP125 SS 004743 G 1 1/4” SS316 0,21

DP150 SS 004744 G 1 1/2” SS316 0,28

DP200 SS 004745 G 2” SS316 0,42

DP250 SS 004746 G 2 1/2” SS316 0,62

DP300 SS 004747 G 3” SS316 0,89

DP400 SS 004748 G 4” SS316 1,20

DP500 SS 004749 G 5” SS316 1,73

DP600 SS 004750 G 6” SS316 2,96

87

HOSE COUPLINGS


RAKLOK TYPE DIN AU

RAKLOK TYPE DIN CU – for assembly with Safety Clamp

RAKLOK TYPE DIN EU - for assembly with Safety Clamp


DIN AU050 Alu D04100 G 1/2” Alu 0,02

DIN AU075 Alu D04101 G 3/4” Alu 0,03

DIN AU100 Alu D04102 G 1” Alu 0,05

DIN AU125 Alu D04103 G 1 1/4” Alu 0,06

DIN AU150 Alu D04104 G 1 1/2” Alu 0,10

DIN AU200 Alu D04105 G 2” Alu 0,15

DIN AU250 Alu D04106 G 2 1/2” Alu 0,28

DIN AU300 Alu D04107 G 3” Alu 0,24

DIN AU400 Alu D04108 G 4” Alu 0,5

DIN AU500 Alu D04109 G 5” Alu 0,67

DIN AU600 Alu D04110 G 6” Alu 0,85

DIN AU050 SS D04140 G 1/2” SS316 0,08

DIN AU075 SS D04141 G 3/4” SS316 0,10

DIN AU100 SS D04142 G 1” SS316 0,14

DIN AU125 SS D04143 G 1 1/4” SS316 0,21

DIN AU150 SS D04144 G 1 1/2” SS316 0,28

DIN AU200 SS D04145 G 2” SS316 0,39

DIN AU250 SS D04146 G 2 1/2” SS316 0,79

DIN AU300 SS D04147 G 3” SS316 0,82

DIN AU400 SS D04148 G 4” SS316 1,25

DIN AU500 SS D04149 G 5” SS316 1,84

DIN AU600 SS D04150 G 6” SS316 2,82

DIN AU075 MS D04121 G 3/4” MS 0,12

DIN AU100 MS D04122 G 1” MS 0,16

DIN AU125 MS D04123 G 1 1/4” MS 0,25

DIN AU150 MS D04124 G 1 1/2” MS 0,33

DIN AU200 MS D04125 G 2” MS 0,44


DIN CU075 SS D04341 G 3/4” SS316 0,20

DIN CU100 SS D04342 G 1” SS316 0,30

DIN CU125 SS D04343 G 1 1/4” SS316 0,47

DIN CU150 SS D04344 G 1 1/2” SS316 0,60

DIN CU200 SS D04345 G 2” SS316 0,84

DIN CU250 SS D04346 G 2 1/2” SS316 1,24

DIN CU300 SS D04347 G 3” SS316 1,69

DIN CU400 SS D04348 G 4” SS316 2,39

DIN CU200 MS D04325 G 2” MS 1,00

DIN CU400 MS D04328 G 4” MS 3,85


DIN EU075 SS D04541 G 3/4” SS316 0,16

DIN EU100 SS D04542 G 1” SS316 0,28

DIN EU125 SS D04543 G 1 1/4” SS316 0,31

DIN EU150 SS D04544 G 1 1/2” SS316 0,45

DIN EU200 SS D04545 G 2” SS316 0,67

DIN EU250 SS D04546 G 2 1/2” SS316 1,06

DIN EU300 SS D04547 G 3” SS316 1,47

DIN EU400 SS D04548 G 4” SS316 2,15

EU200 MS D04525 G 2” MS 0,79

EU400 MS D04528 G 4” MS 3,11


RAKLOK TYPE DIN DU with thread seal

RAKLOK TYPE SW A - for welding

RAKLOK TYPE SW D - for welding


DIN DU050 Alu D04400 G 1/2” Alu 0,08

DIN DU075 Alu D04401 G 3/4” Alu 0,10

DIN DU100 Alu D04402 G 1” Alu 0,15

DIN DU125 Alu D04403 G 1 1/4” Alu 0,27

DIN DU150 Alu D04404 G 1 1/2” Alu 0,33

DIN DU200 Alu D04405 G 2” Alu 0,41

DIN DU250 Alu D04406 G 2 1/2” Alu 0,51

DIN DU300 Alu D04407 G 3” Alu 0,73

DIN DU400 Alu D04408 G 4” Alu 0,97

DIN DU500 Alu D04409 G 5” Alu 1,43

DIN DU600 Alu D04410 G 6” Alu 1,69

DIN DU050 SS D04440 G 1/2” SS316 0,15

DIN DU075 SS D04441 G 3/4” SS316 0,19

DIN DU100 SS D04442 G 1” SS316 0,28

DIN DU125 SS D04443 G 1 1/4” SS316 0,46

DIN DU150 SS D04444 G 1 1/2” SS316 0,60

DIN DU200 SS D04445 G 2” SS316 0,80

DIN DU250 SS D04446 G 2 1/2” SS316 0,94

DIN DU300 SS D04447 G 3” SS316 1,38

DIN DU400 SS D04448 G 4” SS316 2,13

DIN DU500 SS D04449 G 5” SS316 2,83

DIN DU600 SS D04450 G 6” SS316 4,14

DIN DU075 MS D04421 G 3/4” MS 0,21

DIN DU100 MS D04422 G 1” MS 0,35

DIN DU125 MS D04423 G 1 1/4” MS 0,51

DIN DU150 MS D04424 G 1 1/2” MS 0,68

DIN DU200 MS D04425 G 2” MS 0,83



SW A050 SS 007983 G 1/2” SS316

SW A075 SS 007984 G 3/4” SS316

SW A100 SS 007985 G 1” SS316

SW A125 SS 007986 G 1 1/4” SS316

SW A150 SS 007987 G 1 1/2” SS316

SW A200 SS 007988 G 2” SS316

SW A250 SS 007989 G 2 1/2” SS316

SW A300 SS 007990 G 3” SS316

SW A400 SS 007991 G 4” SS316

SW A500 SS 007992 G 5” SS316

SW A600 SS 007993 G 6” SS316


SW D050 007994 G 1/2” SS316

SW D075 007995 G 3/4” SS316

SW D100 007996 G 1” SS316

SW D125 007997 G 1 1/4” SS316

SW D150 007998 G 1 1/2” SS316

SW D200 007999 G 2” SS316

SW D250 008000 G 2 1/2” SS316

SW D300 008001 G 3” SS316

SW D400 008002 G 4” SS316

SW D500 008003 G 5” SS316

SW D600 008004 G 6” SS316

89

HOSE COUPLINGS


RAKLOK TYPE BW B - for welding

RAKLOK TYPE BW F - for welding

GASKET - for RAKLOK couplings


BW B050 SS 008006 G 1/2” SS316

BW B075 SS 008007 G 3/4” SS316

BW B100 SS 008008 G 1” SS316

BW B125 SS 008009 G 1 1/4” SS316

BW B150 SS 008010 G 1 1/2” SS316

BW B200 SS 008011 G 2” SS316

BW B250 SS 008012 G 2 1/2” SS316

BW B300 SS 008013 G 3” SS316

BW B400 SS 008014 G 4” SS316

BW B500 SS 008015 G 5” SS316

BW B600 SS 008016 G 6” SS316


BW F050 008018 G 1/2” SS316

BW F075 008019 G 3/4” SS316

BW F100 008020 G 1” SS316

BW F125 008021 G 1 1/4” SS316

BW F150 008022 G 1 1/2” SS316

BW F200 008023 G 2” SS316

BW F250 008024 G 2 1/2” SS316

BW F300 008025 G 3” SS316

BW F400 008026 G 4” SS316

BW F500 008027 G 5” SS316

BW F600 008028 G 6” SS316


NBR 050 000400 G 1/2” PERBUNAN (NBR)

NBR 075 000401 G 3/4” PERBUNAN (NBR)

NBR 100 000402 G 1” PERBUNAN (NBR)

NBR 125 000403 G 1 1/4” PERBUNAN (NBR)








FPM 050 000400 G 1/2” VITON (FPM)

FPM 050 000411 G 1/2” VITON (FPM)

FPM 075 000412 G 3/4” VITON (FPM)

FPM 100 000413 G 1” VITON (FPM)

FPM 125 000414 G 1 1/4” VITON (FPM)

FPM 150 000415 G 1 1/2” VITON (FPM)

FPM 200 000416 G 2” VITON (FPM)

FPM 250 000417 G 2 1/2” VITON (FPM)

FPM 300 000418 G 3” VITON (FPM)

FPM 400 000419 G 4” VITON (FPM)

FPM 500 000420 G 5” VITON (FPM)

FPM 600 000421 G 6” VITON (FPM)

VQM 050 000422 G 1/2” SILICONE (VMQ)

VQM 075 000423 G 3/4” SILICONE (VMQ)

VQM 100 000424 G 1” SILICONE (VMQ)

VQM 125 000425 G 1 1/4” SILICONE (VMQ)









THREAD seal for RAKLOK couplings


CSM 050 000433 G 1/2” HYPALON (CSM)

CSM 075 000434 G 3/4” HYPALON (CSM)

CSM 100 000435 G 1” HYPALON (CSM)

CSM 125 000436 G 1 1/4” HYPALON (CSM)

CSM 150 000437 G 1 1/2” HYPALON (CSM)


CSM 250 000439 G 2 1/2” HYPALON (CSM)





EPDM 050 000444 G 1/2” EPDM

EPDM 075 000445 G 3/4” EPDM

EPDM 100 000446 G 1” EPDM

EPDM 125 000447 G 1 1/4” EPDM

EPDM 150 000448 G 1 1/2” EPDM

EPDM 200 000449 G 2” EPDM

EPDM 250 000450 G 2 1/2” EPDM

EPDM 300 000451 G 3” EPDM

EPDM 400 000452 G 4” EPDM

EPDM 500 000453 G 5” EPDM

EPDM 600 000454 G 6” EPDM

CR 050 000519 G 1/2” NEOPRENO (CR)

CR 075 000520 G 3/4” NEOPRENO (CR)

CR 100 000521 G 1” NEOPRENO (CR)

CR 125 000522 G 1 1/4” NEOPRENO (CR)

CR 150 000523 G 1 1/2” NEOPRENO (CR)


CR 250 000525 G 2 1/2” NEOPRENO (CR)





PTFE/FPM 050 000466 G 1/2” TEFL+VITON

PTFE/FPM 075 000467 G 3/4” TEFL+VITON

PTFE/FPM 100 000468 G 1” TEFL+VITON

PTFE/FPM 125 000469 G 1 1/4” TEFL+VITON








PTFE/NBR 050 000455 G 1/2” TEFL+NBR

PTFE/NBR 075 000456 G 3/4” TEFL+NBR

PTFE/NBR 100 000457 G 1” TEFL+NBR

PTFE/NBR 125 000458 G 1 1/4” TEFL+NBR









PTFE 050 000530 G 1/2” Tefon (PTFE)

PTFE 075 000531 G 3/4” Tefon (PTFE)

PTFE 100 000532 G 1” Tefon (PTFE)

PTFE 125 000533 G 1 1/4” Tefon (PTFE)

PTFE 150 000534 G 1 1/2” Tefon (PTFE)


PTFE 250 000536 G 2 1/2” Tefon (PTFE)





91

HOSE COUPLINGS


RAKLOK HANDLE

RAKLOK RING

RAKLOK CHAIN

RAKLOK PIN

Art. Nr SIZE MATERIAL

000477 050 1/2” - 075 3/4” SS316

000479 100 1” SS316

000480 125 1 1/4” - 250 2 1/2” SS316

000482 300 3” - 500 5” SS316

000483 600 6” SS316

000488 125 1 1/4” - 250 2 1/2” Forged Brass with steel ring


000493 050 1/2” - 075 3/4” SS316

000494 100 1” SS316

000496 125 1 1/4” - 250 2 1/2” SS316

000498 300 3” - 500 5” SS316

000499 600 6” SS316


000493 30 cm SS316


000501 050 1/2” - 075 3/4” SS316

000503 100 1” SS316

000504 125 1 1/4” - 250 2 1/2” SS316

000506 300 3” - 500 5” SS316

000508 600 6” SS316

000511 050 1/2” - 075 3/4” ST

000513 100 1” ST

000514 125 1 1/4” - 250 2 1/2” ST

000515 250 2 1/2” ST

000516 300 3” - 500 5” ST

000517 600 6” ST


COUPLINGS GUILLEMIN

GUILLEMIN - hose tail with locking ring

GUILLEMIN - female thread with locking ring

The Guillemin couplings are symmetrical. They are connected by 4 hooks If the installation is mobile they in general the coupler with locking ring that makes the connection between

the two couplers. At least one of the 2 couplers needs the locking ring. All the couplings have BSP thread according to ISO 228 which is conform to the EN14420-8 (NFE 03.005) and

DIN 259. The working pressure of these couplings is 16 bars. Material: SS316 / ALU / Bronze and PP. The standard gaskets that are used in the SS316 / AL and Bronze couplings is

NBR. On petition we have available other qualities like PTFE, Viton®, Hypalon® or white EPDM.

WP MATERIAL

PN 16 bar Alu => NBR / Forged Brass => NBR / SS316 => NBR (Also available in VITON, Hypalon, EPDM, PTFE)

Art. Nr SIZE HOSE DIAMETER MATERIAL

006001 DN20 F/H 25 Alu

006002 DN25 F/H 30 Alu

006003 DN32 F/H 35 Alu

006004 DN40 F/H 40 Alu

006005 DN40 F/H 45 Alu

006006 DN50 F/H 50 Alu

006007 DN50 F/H 55 Alu

006008 DN65 F/H 65 Alu

006009 DN65 F/H 70 Alu

006010 DN65 F/H 75 Alu

006011 DN80 F/H 76 Alu

006012 DN80 F/H 81 Alu

006013 DN80 F/H 85 Alu

006014 DN80 F/H 90 Alu

006015 DN100 F/H 100 Alu

006016 DN100 F/H 110 Alu

006017 DN150 F/H 152 Alu

006041 DN20 F/H 25 SS316

006042 DN25 F/H 30 SS316

006043 DN32 F/H 35 SS316

006044 DN40 F/H 40 SS316

006045 DN40 F/H 45 SS316

006046 DN50 F/H 50 SS316

006047 DN50 F/H 55 SS316

006049 DN65 F/H 70 SS316

006051 DN80 F/H 76 SS316

006052 DN80 F/H 80 SS316

006053 DN80 F/H 85 SS316

006054 DN80 F/H 90 SS316

006055 DN100 F/H 100 SS316

006056 DN100 F/H 110 SS316

006057 DN150 F/H 152 SS316

006064 DN40 F/H 40 PP

006065 DN40 F/H 45 PP

006066 DN50 F/H 50 PP

006067 DN50 F/H 55 PP

006071 DN80 F/H 76 PP

006072 DN80 F/H 80 PP

006074 DN80 F/H 90 PP

Art. Nr SIZE THREAD MATERIAL

006201 20 G 3/4” Alu

006202 25 G 1” Alu

006203 32 G 1 1/4” Alu

006204 40 G 1 1/2” Alu

006205 50 G 2” Alu

006206 65 G 2 1/2” Alu

006207 80 G 3” Alu

006208 100 G 4” Alu

006234 40 G 1 1/2” PP

006235 50 G 2” PP

006237 80 G 3” PP

006238 100 G 4” PP

006244 40 G 1 1/2” SS316

006245 50 G 2” SS316

006246 65 G 2 1/2” SS316

006247 80 G 3” SS316

006248 100 G 4” SS316

93

HOSE COUPLINGS


GUILLEMIN - male thread with locking ring

GUILLEMIN - female thread without locking ring

GUILLEMIN - male thread without locking ring

GUILLEMIN DUSTCAP – with locking ring


006301 20 G 3/4” Alu

006302 25 G 1” Alu

006303 32 G 1 1/4” Alu

006304 40 G 1 1/2” Alu

006305 50 G 2” Alu

006306 65 G 2 1/2” Alu

006307 80 G 3” Alu

006308 100 G 4” Alu

006310 150 G 6” Alu

006344 40 G 1 1/2” SS316

006345 50 G 2” SS316

006346 65 G 2 1/2” SS316

006347 80 G 3” SS316

006348 100 G 4” SS316


006401 20 G 3/4” Alu

006402 25 G 1” Alu

006403 32 G 1 1/4” Alu

006404 40 G 1 1/2” Alu

006405 50 G 2” Alu

006406 65 G 2 1/2” Alu

006407 80 G 3” Alu

006408 100 G 4” Alu

006444 40 G 1 1/2” SS316

006445 50 G 2” SS316

006447 80 G 3” SS316

006448 100 G 4” SS316


006501 20 G 3/4” Alu

006502 25 G 1” Alu

006503 32 G 1 1/4” Alu

006504 40 G 1 1/2” Alu

006505 50 G 2” Alu

006506 65 G 2 1/2” Alu

006507 80 G 3” Alu

006508 100 G 4” Alu

006545 50 G 2” SS316

006547 80 G 3” SS316

006548 100 G 4” SS316


006601 020 3/4” Alu

006602 025 1” Alu

006603 032 1 1/4” Alu

006604 040 1 1/2” Alu

006605 050 2” Alu

006606 065 2 1/2” Alu

006607 080 3” Alu

006608 100 4” Alu

006634 040 1 1/2” PP

006635 050 2” PP

006637 075 3” PP

006638 100 4” PP

006644 040 1 1/2” SS316

006645 050 2” SS316

006646 065 2 1/2” SS316

006647 080 3” SS316

006648 100 4” SS316


GUILLEMIN Handled plug without locking ring

GUILLEMIN REDUCTION

GUILLEMIN Gasket


006705 050 2” Alu

006707 075 3” Alu

006708 100 4” Alu

006745 050 2” SS316

006747 080 3” SS316


006900 50 x 80 mm Alu

006901 80 x 100 mm Alu

006902 50 x 65 mm Alu

006903 65 x 80 mm Alu

006940 50 x 80 mm SS316

006941 80 x 100 mm SS316

006942 50 x 65 mm SS316

006943 65 x 80 mm SS316


000279 050 2” white NBR

000280 065 2 1/2” white NBR

000281 075 3” white NBR

000282 100 4” white NBR

000304 040 1 1/2” black NBR

000305 050 2” black NBR

000307 075 3” black NBR

000308 100 4” black NBR

000312 025 1” VITON (FPM)

000314 040 1 1/2” VITON (FPM)

000315 050 2” VITON (FPM)

000317 075 3” VITON (FPM)

000318 100 4” VITON (FPM)

000325 050 2” Tefon (PTFE)

000327 075 3” Tefon (PTFE)

000328 100 4” Tefon (PTFE)

95

HOSE COUPLINGS


DRY BREAK COUPLINGS

TODO – MATIC® Pharmaceutical and petrochemical industries

Tank Unit threaded

Hose Unit threaded

ACCESSORIES

Our DRY-BREAK® couplings provide a simple, quick, safe and environmentally friendly method for the handling of liquids and gasses. They minimise risk of operator exposure to

emissions, provide better ergonomics, reduce human error and achieve commercial benefts through time saving / clean up costs.

Our range of products are supplied into a diverse range of industries including road and railcar loading / unloading, container flling, ship to shore transfer, offshore supply vessels,

chemical and pharmaceutical industry, LPG industry, aviation and military refuelling.

CERTIFICATION

TUV - ADR, RID, IMDG, EUD 97/23/EC (PED), 94/9/EC (ATEX), compatible with NATO STANAG 3756, API RP 104

SIZE DN CONNECTION MATERIAL GASKET WP (bar)

DN 19 56 mm Alu / MS / SS FPM (Viton) 10 / 25











BSP threads according to ISO 228-G. NPT threads according to ANSI B 2.1., fanges acc, norm DIN, ASA, TW and TTMA

Gaskets: Viton, Kalrez, Chemraz, EPDM, NBR















ACCESSORIES

Dust plugs DN 25 - 150 Alu / MS / SS

Dust caps DN 25 - 150 Alu / MS / SS / CR Rubber

Safety pressure tight cap (PTC) DN 40 - 150 SS

Wrenches DN 40 - 150 SS


TODO – GAS® LPG industries

Tank Unit threaded

Hose Unit threaded

ACCESSORIES

API COUPLINGS (API R.P. 1004) for bottom loading

API Adaptor - automatic

API Adaptor with handle - mechanical.

API coupler with handle - mechanical


DN 19 56 mm MS / SS / SS spec. NBR / FPM (Viton) 25









DN 19 56 mm MS / SS NBR / FPM (Viton) 25








SIZE END CONNECTIONS MATERIAL GASKET WP (bar)

DN 100 TW3/100 and TTMA fange Alu FPM (Viton) 10

alternative: with sight glass

norm: API R.P.1004



alternative: with sight gllass

norm: API. R.P. 1004 / EN 13083 STANDARDS AND TO 94/63/CE EUROPEAN DIRECTIVE



norm API R.P.1004

ACCESSORIES

Dust plugs DN 25 - 150 Alu / MS / SS

Dust caps DN 25 - 150 Alu / MS / SS / pryž

Safety pressure tight cap (PTC) DN 40 - 150 SS

Wrenches DN 40 - 150 SS

97

HOSE COUPLINGS


DUSTCAP - API

DUSTCAP - API

AIR INTERLOCK VALVE

For mechanically operated male API

SIZE MATERIAL GASKET

DN 100 Alu FPM (Viton)

norm API R.P. 1004

SIZE MATERIAL GASKET

DN 100 Alu FPM (Viton)

norm API RP 1004


WORM DRIVE CLAMP W 1

WORM DRIVE CLAMP W 4

SUPERIOR CLAMP W 1

HOSE CLAMPS

SUPERIOR CLAMP W 4

SIZE BAND WIDTH SIZE BAND WIDTH SIZE BAND WIDTH

W1 8-12 9 mm W1 40-60 9 mm W1 110-130 9 mm

W1 10-16 9 mm W1 50-70 9 mm W1 120-140 9 mm

W1 12-25 9 mm W1 60-80 9 mm W1 130-150 9 mm

W1 16-25 9 mm W1 70-90 9 mm W1 140-160 9 mm

W1 20-32 9 mm W1 80-100 9 mm W1 150-170 9 mm

W1 25-40 9 mm W1 90-110 9 mm Pressure: 25 bar

W1 32-50 9 mm W1 100-120 9 mm Material galvanized steel


W1 8-12 9 mm W1 25-40 9 mm W1 70-90 9 mm

W1 10-16 9 mm W1 32-50 9 mm W1 80-100 9 mm

W1 12-25 9 mm W1 40-60 9 mm W1 90-110 9 mm

W1 16-25 9 mm W1 50-70 9 mm Pressure: 25 bar

W1 20-32 9 mm W1 60-80 9 mm Material steinless steel


17-19 18 mm 60-63 22 mm 140-148 26 mm

20-22 18 mm 64-67 22 mm 149-161 26 mm

23-25 18 mm 68-73 24 mm 162-174 26 mm

26-28 18 mm 74-79 24 mm 175-187 26 mm

29-31 20 mm 80-85 24 mm 188-200 26 mm

32-35 20 mm 86-91 24 mm 201-213 26 mm

36-39 20 mm 92-97 24 mm 214-226 26 mm

40-43 20 mm 98-103 24 mm 227-239 26 mm

44-47 22 mm 104-112 24 mm 240-252 26 mm

48-50 22 mm 113-121 24 mm - -

52-55 22 mm 122-130 24 mm Pressure: 40 bar

56-59 22 mm 131-139 26 mm Material galvanized steel


17-19 18 mm 60-63 22 mm 140-148 26 mm

20-22 18 mm 64-67 22 mm 149-161 26 mm

23-25 18 mm 68-73 24 mm 162-174 26 mm

26-28 18 mm 74-79 24 mm 175-187 26 mm

29-31 20 mm 80-85 24 mm 188-200 26 mm

32-35 20 mm 86-91 24 mm 201-213 26 mm

36-39 20 mm 92-97 24 mm 214-226 26 mm

40-43 20 mm 98-103 24 mm 227-239 26 mm

44-47 22 mm 104-112 24 mm 240-252 26 mm

48-50 22 mm 113-121 24 mm - -

52-55 22 mm 122-130 24 mm Pressure: 40 bar

56-59 22 mm 131-139 26 mm Material galvanized steel

99

HOSE COUPLINGS


HOSE CLAMP HERKULES

HOSE CLAMP

TW Safety clamps EN14420-3 (DIN2817)

Max. WP MATERIAL NORM

PN 16-25 bar Iron -

Art. Nr. FOR HOSE RANGE

S 22 13 mm 17-22

S 24 19 mm 37-32

Max. WP 16 bar

HOSE CLAMP DIN 20039 A


SL 29 13 mm 22-29

SL 34 19 mm 28-34

SL 40 25 mm 32-40

SL 49 32 mm 39-49

SL 60 38 mm 48-60

SL 72 50 mm 56-72

SL 76 50 mm 60-76

SL 94 63 mm 77-94

SL 400 75 mm 89-101

SL 115 75 mm 94-115

SL 525 89 mm 113-127

SL 145 89 mm 115-145

SL 550 100 mm 127-140

SL 600 100 mm 135-155

SL 675 125 mm 155-175

SL 769 150 mm 175-195

SL 875 175 mm 210-225

SL 988 200 mm 227-250

Max. WP 16 bar

HOSE CLAMP DIN 20039 B


SK 29 13 mm 22-29

SK 34 19 mm 28-32

SK 39 25 mm 35-42

SK 44 28 mm 42-45

SK 51 35 mm 45-53

SK 60 42 mm 55-60

SK 73 50 mm 60-73

SK 75 75 mm 86-102

Max. WP 16 bar

Art. Nr. Art. Nr SIZE MATERIAL WEIGHT (kg)

SC 013 Alu 005509 DN 13 Alu 0,10

SC 019 Alu 005510 DN 19 Alu 0,10

SC 025 Alu 005511 DN 25 Alu 0,10

SC 032 Alu 005512 DN 32 Alu 0,10

SC 038 Alu 005513 DN 38 Alu 0,20

SC 050 Alu 005514 DN 50 Alu 0,30

SC 063 Alu 005515 DN 63 Alu 0,40

SC 075 Alu 005518 DN 75 Alu 0,50

SC 080 Alu 005516 DN 80 Alu 0,50

SC 100 Alu 005517 DN 100 Alu 1,10

SC 025 SS 0005541 DN 25 SS316 0,25

SC 038 SS 005543 DN 38 SS316 0,43

SC 050 SS 005544 DN 50 SS316 0,60

SC 075 SS 005546 DN 75 SS316 0,90

SC 100 SS 005548 DN 100 SS316 1,40



STANDARD QUICK DISCONNECT COUPLINGS DN 7,2

COUPLER – Male thread

COUPLER – Female thread

COUPLER – with hose tail

COUPLING – with squeeze nut and spring guard

PLUG – Male thread

PLUG – Female thread

MAX. WP TEMP. RANGE MEDIUM DN THREAD FLOW CAPACITY ONE HAND SHUT OFF NORM AREA

PN 35 bar -20°C - +100°C Air a.o. 7,2 ISO 228 / DIN 2999 1100 l/min yes 1 way EU worldwide

TYPE THREAD WEIGHT (g)

ES 18 A G 1/8” 70

ES 14 A G 1/4” 73

ES 38 A G 3/8” 76

ES 12 A G 1/2” 87


ES 18 I G 1/8” 90

ES 14 I G 1/4” 92

ES 38 I G 3/8” 85

ES 12 I g 1/2” 87

TYPE FOR HOSE WEIGHT (g)

ES 6 T 6 mm 64

ES 8 T 8 mm 67

ES 9 T 9 mm 68

ES 10 T 10 mm 70

ES 13 T 13 mm 75


ES 58 TQF 5 x 8 mm 90

ES 6 TQF 6 x 8 mm 90

ES 6510 TQF 6,5 x 10 mm 120

ES 8 TQF 8 x 10 mm 120

ES 812 TQF 8 x 12 mm 123

ES 9 TQF 9 x 12 mm 123

TYPE THREAD WEIGHT (g) MATERIAL

ES 18 NA G 1/8” 17 MS 58

ES 14 NA G 1/4” 21 MS 58

ES 38 NA G 3/8” 26 MS 58

ES 12 NA G 1/2” 41 MS 58

ES 18 NAS G 1/8” 15 ST Z. PL.

ES 14 NAS G 1/4” 19 ST Z. PL.

ES 38 NAS G 3/8” 24 ST Z. PL.

ES 12 NAS G 1/2” 39 ST Z. PL..

TYPE THREAD WEIGHT (g) MATERIAL

ES 18 NI G 1/8” 16 MS 58

ES 14 NI G 1/4” 24 MS 58

ES 38 NI G 3/8” 23 MS 58

ES 12 NI G 1/2” 38 MS 58

ES 18 NIS G 1/8” 15 ST Z. PL.

ES 14 NIS G 1/4” 22 ST Z. PL.

ES 38 NIS G 3/8” 21 ST Z. PL.

ES 12 NIS G 1/2” 35 ST Z. PL.

101

HOSE COUPLINGS


PLUG – with hose tail

PLUG – with squeeze nut and spring guard

MULTI WAY Connector 3x female thread

MULTI WAY Connector 4x female thread

Male threaded hose tail

TYPE FOR HOSE WEIGHT (g) MATERIAL

ES 6 S 6 mm 14 MS 58

ES 8 S 8 mm 18 MS 58

ES 9 S 9 mm 17 MS 58

ES 10 S 10 mm 19 MS 58

ES 13 S 13 mm 24 MS 58

ES 6 SS 6 mm 13 ST Z. PL.





ES 4 SQF 4 x 6 mm 30

ES 58 SQF 5 x 8 mm 31

ES 6 SQF 6 x 8 mm 31

ES 6510 SQF 6,5 x 10 mm 73

ES 8 SQF 8 x 10 mm 73

ES 812 SQF 8 x 12 mm 73

ES 9 SQF 9x 12 mm 73


DWS 38 3 x G 3/8” 93

DWS 12 3 x G 1/2” 100


VWS 38 4 x G 3/8” 191

VWS 12 4 x G 1/2” 70

MAX. WP MATERIAL MEDIUM THREAD CONE

PN 12 bar MS 58 Compressed air, gases ISO 228 / DIN 2999 37°

TYPE THREAD FOR HOSE WEIGHT (g)

T 186 M G 1/8” 6 mm 12

T 189 M G 1/8” 9 mm 20

T 146 M G 1/4” 6 mm 19

T 148 M G 1/4” 8 mm 21

T 149 M G 1/4” 9 mm 22

T 1411 M G 1/4” 11 mm 26

T 1413 M G 1/4” 13 mm 34

T 386 M G 3/8” 6 mm 25

T 388 M G 3/8” 8 mm 27

T 389 M G 3/8” 9 mm 28

T 3811 M G 3/8” 11 mm 33

T 3813 M G 3/8” 13 mm 36

T 126 M G 1/2” 6 mm 37

T 129 M G 1/2” 9 mm 41

T 1213 M G 1/2” 13 mm 44

T 3419 (tm) G 3/4” 19 mm 125

T 1025 (tm) G 1” 25 mm 210


GEKA COUPLINGS

GEKA - hose coupling

GEKA – female thread

GEKA – male thread

GEKA – dust cap

GEKA – gasket

MAX. WP TEMPERATURE MATERIAL GASKET MEDIUM THREAD CLAW DISTANCE

PN 50 bar up to 95ºC MS 58 NBR water ISO 228 40mm


GSK 10 10 mm 93

GSK 13 13 mm 94

GSK 16 16 mm 102

GSK 19 19 mm 102

GSK 25 25 mm 123

GSK 32 32 mm 176

GSK 38 38 mm 183


GKI 14 G 1/4” 76

GKI 38 G 3/8” 80

GKI 12 G 1/2” 94

GKI 34 G 3/4” 96

GKI 10 G 1” 100

GKI 54 G 1 1/4” 114

GKI 15 G 1 1/2” 135

TYPE GASKET WEIGHT (g)

GKA 14 G 1/4” 89

GKA 38 G 3/8” 83

GKA 12 G 1/2” 88

GKA 34 G 3/4” 90

GKA 10 G 1” 92

GKA 54 G 1 1/4” 101

GKA 15 G 1 1/2” 135

TYPE SIZE WEIGHT (g)

GKO - 103

TYPE MATERIAL COLOUR

GKOR-N NBR black

103

HOSE COUPLINGS


CHECK VALVES

CHECK VALVE – with female thread

FOOT VALVE – inlet with strainer – outlet female thread

GEKA HEAVY TYPE SPRAY NOZZLES

Spray nozzle with hose tail

Spray nozzle with GEKA coupling bayonet

MAX. WP TEMPERATURE MATERIAL MAT. SPRING OPENING PRESSURE STRAINER THREAD

PN 16 bar up to +100°C MS 58 SS Appr. 0,02 bars SS / Nylon ISO 228


RSV 14 G 1/4” 80

RSV 38 G 3/8” 85

RSV 12 G 1/2” 100

RSV 34 G 3/4” 150

RSV 10 G 1” 235

RSV 54 G 1 1/4” 335

RSV 15 G 1 1/2” 450

RSV 20 G 2” 730


FVMF 38 G 3/8” 90

FVMF 12 G 1/2” 115

FVMF 34 G 3/4” 165

FVMF 10 G 1” 245

FVMF 54 G 1 1/4” 350

FVMF 15 G 1 1/2” 520

FVMF 20 G 2” 810

MAX WP TEMPERATURE MATERIAL GASKET MEDIUM CLAW DISTANCE

PN 10 bar up to +95°C MS 58 NBR water 40 mm

TYPE DN CONNECTION NOZZLE BORE WEIGHT (g)

SDT 13 13 mm 5 mm 130

SDT 16 16 mm 7 mm 225

SDT 19 19 mm 7 mm 230

SDT 25 25 mm 8 mm 405

SDT 32 32 mm 8 mm 500

TYPE DN CONNECTION NOZZLE BORE WEIGHT (g)

SDK 12 GEKA - spojka 5 mm 220




EA UNIVERSAL COUPLINGS

EA COUPLING - with hose tail

EA COUPLING - with hose tail and safety collar

EA COUPLING – female thread

EA DUSTCAP

EA COUPLING – male thread

EA GASKET

MAX. WP TEMPERATURE MATERIAL MEDIUM CLAW DISTANCE NORM GASKET THREAD

PN 16 bar -40°C - 95°C Carbon Steel Compressed air 42 mm DIN 3489 perbunan ISO 228


SKG 6 6 mm 157

SKG 10 10 mm 150

SKG 13 13 mm 141

SKG 15 15 mm 142

SKG 19 19 mm 155

SKG 25 25 mm 176

SKG 32 32 mm 244


SKB 13 13 mm 174

SKB 15 15 mm 175

SKB 19 19 mm 182

SKB 25 25 mm 240


KIG 14 G 1/4” 138

KIG 38 G 3/8” 135

KIG 12 G 1/2” 150

KIG 34 G 3/4” 155

KIG 10 G 1” 184

KIG 54 G 1 1/4” 197

KIG 8 Rd 32 x 1/8” 244

TYPE TYPE TYPE

VKO without chain 130

VKM with chain 140

VKM-K chain (spare part) 7


KAG 14 G 1/4” 157

KAG 38 G 3/8” 170

KAG 12 G 1/2” 162

KAG 34 G 3/4” 175

KAGO 34 G 3/4” 150

KAG 10 G 1” 174

KAGO 10 G 1” 165

KAG 54 G 1 1/4” 230

TYPE RESISTANCE MATERIAL TEMPERATURE RANGE

GOER Oil PERBUNAN -40 - + 95

GDOR Steam OHASIL -40 - + 200

GVOR Chemicals VITON -40 - + 200

105

HOSE COUPLINGS


GASKETS - hardened PVC

HOT TAR SCREWING

HOT TAR SCREWING

SANDBLAST COUPLINGS

HOSE COUPLING (malleable iron)

FEMALE THREAD COUPLING (malleable iron)

GASKET (for malleable iron couplings)

Hot tar screwing of steel/malleable iron, zinc plated and yellow chromated. Easy to screw through wing nut; tapered stem with safety collar

MAX. WP MATERIAL MEDIUM THREAD CONE

PN 25 bar malleable iron/ steel tar ISO 228 1:03

TYPE TYPE CONNECTION DN WEIGHT (g)

HTV-SB hot tar screwing complete 19 mm x G 3/4” 15 506

HTVT-SB tapered stem 19 mm, cone 1:3 15 200

HTVM wing nut G 1 1/4” - 207

HTVET nipple G 3/4 x G 1 1/4”, cone 1:3 - 99

MAX. WP MATERIAL GASKET MEDIUM THREAD CLAW DISTANCE

PN 12 bar mall. iron/ aluminium/ nylon perbunan blasting media ISO 228 / coarse thread 58 mm


SS 25 T 25 x 7 mm 481

SS 32 TN 32 x 8 mm 827

SS 32 T 32 x 8 mm 570

SS 38 T 38 x 9 mm 784

SS 40 T 40 x 10 mm 893


SK 38 TN G 1 1/4” 509

SK 38 T G 1 1/4” 392

SK 38/15TN G 1 1/2” 464

SK 38/15 T G 1 1/2” 340

SK 50 TN coarse thread 50 mm 448

SK 50 T coarse thread 50 mm 324

TYPE FOR TYPE MATERIAL WEIGHT (g)

SKD …T PERBUNAN 11

SKD-1 …TN PERBUNAN 20

TYPE FOR MALE THREAD WEIGHT (g)

HPD 18 G 1/8” 0,13

HPD 14 G 1/4” 0,31

HPD 38 G 3/8” 0,37

HPD 12 G 1/2” 0,53

HPD 34 G 3/4” 0,73

HPD 10 G 1” 1,15


NOZZLE HOLDER - aluminium with female thread

HOSE COUPLING – (nylon)

FEMALE THREAD COUPLING - (nylon)

GASKET - for nylon couplings

NOZZLE HOLDER - nylon with female thread

BALL VALVES

Hexagon Ball valve with 2 x female thread

HEXAGON BALL VALVES

Miniature ball valves of brass, nickel plated for pneumatic or water installations in industry, construction or civil applications

body: brass, nickel plated handle: plastic ball: brass, chromed seals: PTFE

TYPE FOR HOSE THREAD WEIGHT (g)

SD 32-32 A 32 x 8 G 1 1/4” 248

SD 50-32 A 32 x 8 coarse thread 50 mm 231


CQP-3/4 19 x 7 mm 193

CQP-1 25 x 7 mm 165

CQP-2 32 x 8 mm 222

CQP-3 38 x 9 mm 244

CQP-4 42 x 9/40 x 10 mm 215


CFP G 1 1/4” 126

CFP-50 coarse thread 50mm 107

TYPE FOR COUPLING MATERIAL WEIGHT (g)

SDR-1 CQP-3/4 perbunan 20

SDR-2 CQP-1 perbunan 17

SDR-3 All other types perbunan 18

TYPE FOR HOSE THREAD WEIGHT (g)

NHP-34 19 x 7 mm coarse thread 50 mm 115




NEP-34 19 x 7 mm G 1 1/4” 109

NEP-1 25 x 7 mm G 1 1/4” 102

NEP-2 32 x 8 mm G 1 1/4” 154

NEP-3 38 x 9 mm G 1 1/4” 166

MAX. WP TEMPERATURE RANGE MATERIAL GASKET MEDIUM THREAD

PN 10 bar -10°C / +90°C brass nickel plated PTFE compressed air / water ISO 228

TYPE THREAD DN WEIGHT (g)

KM14TS G 1/4” 5,5 71

KM38TS G 3/8” 8 86

KM12TS G 1/2” 10 137

107

HOSE COUPLINGS


Hexagon Ball valve with female/male thread

STANDARD BALL VALVES

Standard Ball valve with 2 x female thread

AIR BLOW GUNS

APN - forged aluminium

APN - forged aluminium

All Valves with full free passage, reduced dimensions. For Construction, Industry, Agriculture and civil installations.

body and sockets: brass / spindle and nut: brass / ball: brass chromed

ball seals: PTFE / spindle seals: Viton®-O-Ring

handle: Steel coated with PVC

adhesive: Loctite AVX 586

TYPE THREAD DN WEIGHT (g)

KMZ14TS G 1/4” 5,5 61

KMZ38TS G 3/8” 8 83

KMZ12TS G 1/2” 10 130

MAX. WP TEMPERATURE RANGE MATERIAL GASKET THREADS MEDIUM

PN 16 bar -20°C / +120°C MS 58 PTFE / Viton ISO 228 water


ART16-38 G 3/8” 100

ART16-12 G 1/2” 150

ART16-34 G 3/4” 200

ART16-10 G 1” 350

ART16-54 G 1 1/4” 550

ART16-15 G 1 1/2” 750

ART16-20 G 2” 1250

ART16-25 G 2 1/2” -

ART16-30 G 3” -

AR16-40 G 4” -

MAX. WP TEMPERATURE RANGE MATERIAL MAT. NOZZLE MEDIUM THREAD THREAD NOZZLE

PN 12 bar -20°C / +100°C ALU / MS58 ST. Z. PL. compressed air ISO 228 / DIN 13 M 12x1,25 / G 3/8”

TYPE CONNECTION NOZZLE BORE WEIGHT (g)

APN 6 for hose 6 mm 2 mm 254





AHL 6 for hose 6 mm 2 mm 104






AHM - brass

APK - plastic


AHM 6 for hose 6 mm 2 mm 206




AHM 14 Thread G 1/4“ m 2 mm 209

MAX. WP TEMPERATURE RANGE MATERIAL MAT. NOZZLE NOZZLE BORE MEDIUM THREAD

PN 12 bar -20°C / +80°C Plastic ST 3 MM Compressed Air ISO 228

TYPE CONNECTION WEIGHT (g)

APKO G 1/4”i 96

APK 14 NA ES 14 NA 118

109

TECHNICAL CHARTS


TECHNICAL CHARTSINDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS TECHNICAL SHEETS

CHEMICAL RESISTENCE GUIDE

Medium

PVC

EPDM

NBR

NR

SBR

PTFE

XLPE

Acetanhydrid X B X X B B

Acetone X A X D D B A

Amoniac

Amylacetone X X X A

Amylnaphtalen X X X X X

Anetol X X

Anilin X C X X X A A

Anilin colours B X B B C A

Asphalt X X X X X A X

Bleachery (croft) B X X X A A

Benzene X X X X X A B

Benzin D X A X X A B

Benzin leadless X X C X X B

Benzin paint X A X X A

Avgas X A X X X A

Heavy benzin X D X X A A

High-octane benzin X X B A

Benzylacetylate X X X A

Benzylalcohol X X X X X A A

Bitumen

Bromine X X X X X A X

Butan X X A X X A A

Butylacetat X D X X X D A

Butylacrylat X X X X B

Butylbenzen X X X A

Butylchloride X X X B

Cyklohexane X X B X X A A

Cyklohexanol X X D X X A A

Ammonia gaseous B A B B A A

Ammonia gaseous 65°C D B X D D A B

Ammonia liquid X A B C C A A

Ammonia water 25% C B C A

Tar X X X X X A X

Coal tar X A X X A

Dioxan X B X X X A A

Nitrogen B A A A A A A

Ethanol B A D A A D A

Ethers X X D X X A

Etylacetate X C X X X A

Ethylacrylate X B X X X A

Ethylbenzene X X X X X A A

Ethylenchlorid D X X X C B

Etylether X D X X A A

Phenol X B X X X A A

Fluor X X X X X X X

Formaldehyde 40% B B X B D A A

Formaline B B A

Medium

PVC

EPDM

NBR

NR

SBR

PTFE

XLPE

Freon 12 X B X X X A

Freon 22 X X X X A

Heptan D X A X X A A

Hydroxyl ammonia C B C A

Hydroxal pottasium A A X A B A B

Soda hydroxyl D A B B B A

Calcium hydroxyl A A A A B A A

Chlorine liquid X X X X X X

Chlorine gas, dry B D X X D A X

Chlorine gas, moist X D X X D A X

Chloraceton X A X X X A A

Chlorbenzene X X X X X A B

Chlorbutan X X X X B

Chlorphenol X X X X X A

Chloride phosphorite A X X X A

Chloride nickelous A A A A A A

Chloride sulphuric X D X X A

Soda chloride B B X X A B

Calcium chloride B A X X X A B

Chloritoluene X X X X X A B

Isooctan D X A X X A B

Iodine X D D D D A

Iodoform X X A X X

Acid adipe D B B B A

Acid acrilic A

Benzoic acid X D D X X A A

Acid boric A A A A A A A

Acid bromohydrogen B A X A X A B

Citric acid B A A A A A A

Acid dichloracetic X B X A

Ketons X A D X X A

Nitric acid fuming X X X X X A

Nitric acid 10% D X X X A A

Nitric acid 20% B B X X X A A

Nitric acid 30% B D X X X B A

Nitric acid 30-70% D C X X X A

Acid fuorhydrogen 75% X D X X X A A

Acid phosphoric 10% B X X A A A A

Acid phosphoric 10-85% X X B X A A

Acid chloracetic 25% X B X D X D A

Acidchlorhydrogen 20% B B C B B A A

Acidchlorhydrogen 37% X B C C C A A

Acid chromium 50% D D X X X B A

Malic acid B X D D D A B

carbol acid X B X X X A A

Butyric acid B B X D X A A

Lactic acid, cold C X X B B A

111

TECHNICAL CHARTS


Medium

PVC

EPDM

NBR

NR

SBR

PTFE

XLPE

Lactic Acid, hot X X X X A

Uric acid

Formic acid B A X B B A A

Naphtalen acid X B X X A

Acetatic acid 10% B E X C C B A

Acetatic acid 50% B A X B X B A

Sulphuric acid 25% B A X B X A A

Sulphuric acid 25-50% C A X B X A A

Sulphuric acid 50-96% X D X X X A A

Sulphuric acid fuming X X X X X A X

Sorrel acid B A X X X A A

Carbonic acid B B X A A A A

Varnish X B X X A

Varnish diluters X X X X X E

Soda lye D X E X X A

LPG X E X X A

Tallow X A X X A

Fat acids B X D X X A

Methan D A X X

Methylacetat X A X X X A A

Methanol B A A A A A A

Methylbenzen X X X A

Urea B A A A

Soap dilutions A A A B A A A

Naphtalen D X X X X A A

Diesel oil X A X X A A

Vinegar B A X A C A

Acetate potassium A C B X A

Acetate aluminium C A C X X A A

Acetate nickelous A B A X A A

Acetate plumbic B A B A X A A

Soda acetate A B X X A A

Calcic acetate A B X X A A

Zinc acetate A C C X A

Ferrous acetate X X X A

Octanol B B A

Anilin oil B X X X

Piny oil X X X X X A A

Wood oil X A X X A A

Mineral oil X A X X A A

Petroleum oil X A X X A

Cuttin oil X A X X A

Oleum X X X X X A X

Steam +180°C X A X X X A X

Paraffnic wax B X A X X A

Hydrogen peroxide < 10% B C X X X A C

Hydrogen peroxide > 10% X X X X A C

Medium

PVC

EPDM

NBR

NR

SBR

PTFE

XLPE

Petroleum X A X X A A

Natural gas X A X X A

Propan B X A X X A A

Propanol A A A

Raw oil X A X X A

Mercury A A A A A A

Color diluters X X X X X A

Benzin diluters C X A X X A

Varnish diluters X X X X X A

Sulphur X C X X X A

Plaster X X

Sulphate ferrous X A A A A A A

Soda lye D A B B B A

Salt brine X A C A A A A

Terpentine X X X X X A A

Toulen X X X X X A A

Lime B B X B

Lime chloric A X X X A B

Soda lime A B A

Xenon X E E E E

Xylen X X X X X A

CHEMICAL RESISTENCE GUIDE

A

Explanations

A … perfect resistence

B … good resistence

C … average-condiditioned resistence

D … small resistence

X … without resistence

Notice - warning !

This guide serves merely for better orientation while choosing suitable material.

Be aware, please, that these data are just for orientation and cannot be taken as a 100%

information. Chemical resistence is infuenced, besides media, further factors, like

temperature and working conditions.

Temperature

Generally, the higher temperature of chemical, the stronger - more aggresive is its

effect.

Operational conditions

Here holds: hose to certain degree the chemical so called „sucks in“ and in static position

functions without problems. But during more offen manipulation (fold) come to medium

leakage and hose sstops serving tofven purpouse.

“Demand our special consultation!”

TECHNICAL CHARTSINDUSTRIAL HOSES SUCTION HOSES HOSE COUPLINGS TECHNICAL SHEETS

Commercial title Marking Characteristic Not suitable for

PVC PVC Good resistence to aging and outer infuences,

partially oil- and chemical resistence, minimal

heat resistence

Concentrated acids, hycrocarbons, ketons, ftalates,

chlorid, acetats

SBR SBR Good physical characteristics, good resistance to

abrasion, minimal resistance to oil and ozone

Ozone, concentrated acids, oils, fats and hydrocar-

bons

Nitril (Bunan) NBR Perfect oilproofness, good physical characteristics Ozone, ketone, chlorids, aldehyds

EPDM / Versigard® EPDM Generally frst rate polymer, perfect resistence ho

high temperatures, ozone and outer surrounding.

Very good resistence to chemicals, minimal to oils.

Mineral oils, dilutants, aromatic hydrocarbons

Butyl / WeatherexTM IIR Very good resistence to oute infuences, low

porosity. Good physical characteristics, partly

resistent to petroleum substances.

Cyclohexan, hexan, benzin, benzens

Neopren® CR First rate resistence to outer infuence and ag-

ing, good oilproof and physical characteristics.

Fireproof

Concentrate oxidizing acids, esthers, ketons,

chlorids, aromatic hydrocarbons

Hypalon® / HysuniteTM CSM First rate resistance to aging, ozone, outer

infuence, nad acids, good resistence to warm and

abrasion, partial to oils.

Concentrated oxidizing adics, esters, ketons,

chlorid, aromatic hydrocarbons

Natural / PuretenTM NR First rate physical characteristics, perfect resistence

to abrasion, minimal to fre

Ozone, concentrated acids, oils, fats, hydrocarbons

Silicon VMQ Very good resistence to high temperatures. First

rate resistence to ozone, aging andouter

surrounding infuence, very good mechanic

characteristics, lesser mechanic frmness

Aromatic hydrocarbons, chlorids, ethers

Viton® / FlosynTM FKM First rate heat resistence, especially in air and oil,

very good chemical resistance, freproof.

Esters and ketons

Netted polyethylen / SpeclarTM XLPE First rate resistance to diluters, oils and chemicals.

Must not be changed for standart PE.

Chlorine, fuor, brommme, iod, oleum

Highmolecural polyethylen / PliosinTM UHMWPE First rate resistence to dilutants, oils, and

chemicals. Must not be changed for standart PE.

Chlorine, fuor, bromme, tar, oleum

Tefon PTFE First rate resistence to chemicals and dilutants,

high surface hydrophoby, good heat resistence

Aromatic hydrocarbons, chlorides, ethers, hot lye

Polyuretan PU Very good physical charactdristic, frst rate

abrasion resistence, good resistence to oils, heat

and aging.

Concentrated acids, chlorides, aldehyds

Nylon PA Very good chemical resistence, good resisstence

to low temperatures, limited physically mechanical

characteristics (elstacity, frmness).

Chlorides, concentrated acids

ELASTOMERS AND POLYMERS SPECIFICATION

0205-05_bunkering_hoses

Documents

air ariacord

ariacord hot air

hot airhot air hoses

drinkfood pvc

cristal food sp

drinkfood pu

drinkfood red

steam hot water hoses