This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: 1X Plus Amplification Diluent
· Product number: FP1498· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008 Void· Hazard pictograms Void· Signal word Void· Hazard statements Void· Additional information:
Safety data sheet available on request.· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· General information: No special measures required.· After inhalation: Supply fresh air; consult doctor in case of complaints.· After skin contact: If skin irritation continues, consult a doctor.· After eye contact: Rinse opened eye for several minutes under running water.· After swallowing: If symptoms persist consult doctor.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
· 5.1 Extinguishing media· Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).· 6.4 Reference to other sections
See Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handling No special measures required.· Information about fire - and explosion protection: No special measures required.
(Contd. on page 3) GB
Page 3/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: 1X Plus Amplification Diluent
(Contd. of page 2)
44.1.4
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace:
1330-43-4 disodium tetraborate, anhydrous (<1.0%)
WEL Long-term value: 1 mg/m³
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.· Respiratory protection: Not required.· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
Solids content: 14.8 %· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritation Based on available data, the classification criteria are not met.· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.
(Contd. on page 5) GB
Page 5/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: 1X Plus Amplification Diluent
(Contd. of page 4)
44.1.4
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: 1X Plus Amplification Diluent
(Contd. of page 5)
44.1.4
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
· UN "Model Regulation": Void
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 30
· National regulations:
· Other regulations, limitations and prohibitive regulations
· Substances of very high concern (SVHC) according to REACH, Article 57
1330-43-4 disodium tetraborate, anhydrous
10043-35-3 boric acid
· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH360FD May damage fertility. May damage the unborn child.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicSVHC: Substances of Very High ConcernvPvB: very Persistent and very BioaccumulativeRepr. 1B: Reproductive toxicity – Category 1B
GB
Page 1/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: Opal 520 Reagent
· Product number: FP1487A· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Acute Tox. 4 H302 Harmful if swallowed.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labelling:4-IODOPHENYLBORONIC ACID
· Hazard statementsH302 Harmful if swallowed.H315 Causes skin irritation.H319 Causes serious eye irritation.H335 May cause respiratory irritation.
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 520 Reagent
(Contd. of page 1)
44.1.4
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hoursafter the accident.
· After inhalation: In case of unconsciousness place patient stably in side position for transportation.· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.· After swallowing: Call for a doctor immediately.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.
(Contd. on page 3) GB
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 520 Reagent
(Contd. of page 2)
44.1.4
· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Dispose contaminated material as waste according to item 13.Ensure adequate ventilation.
· 6.4 Reference to other sectionsSee Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: Keep container tightly sealed.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Avoid contact with the eyes and skin.
· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.Suitable respiratory protective device recommended.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
(Contd. on page 4) GB
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 520 Reagent
(Contd. of page 3)
44.1.4
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection:
Tightly sealed goggles
· Environmental Exposure Controls N/A
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: According to product specification
· Odour: Characteristic· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: Undetermined.Initial boiling point and boiling range: 189 °C
· Flash point: 95 °C
· Flammability (solid, gas): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto-ignition temperature: Product is not selfigniting.
· Explosive properties: Product does not present an explosion hazard.
· Explosion limits:Lower: Not determined.Upper: Not determined.
· Vapour pressure: Not determined.
· Density: Not determined.· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Not miscible or difficult to mix.
· Partition coefficient: n-octanol/water: Not determined.
(Contd. on page 5) GB
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 520 Reagent
(Contd. of page 4)
44.1.4
· Viscosity:Dynamic: Not determined.Kinematic: Not determined.
· Solvent content:Organic solvents: 0.0 %
Solids content: 3.9 %· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity
Harmful if swallowed.· Primary irritant effect:· Skin corrosion/irritation
Causes serious eye irritation.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure
May cause respiratory irritation.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 520 Reagent
(Contd. of page 5)
44.1.4
· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
SECTION 14: Transport information
· 14.1 UN-Number· ADR, IMDG, IATA UN2810
· 14.2 UN proper shipping name· ADR 2 8 1 0 T O X I C L I Q U I D , O R G A N I C , N . O . S . ( 4 -
IODOPHENYLBORONIC ACID)· IMDG, IATA T O X I C L I Q U I D , O R G A N I C , N . O . S . ( 4 -
IODOPHENYLBORONIC ACID)
· 14.3 Transport hazard class(es)
· ADR, IMDG, IATA
· Class 6.1 Toxic substances.· Label 6.1
· 14.4 Packing group· ADR, IMDG, IATA III
· 14.5 Environmental hazards: Not applicable.
· 14.6 Special precautions for user Warning: Toxic substances.· Danger code (Kemler): 60· EMS Number: F-A,S-A· Stowage Category A · Stowage Code SW2 Clear of living quarters.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
(Contd. on page 7) GB
Page 7/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Maximum net quantity per inner packaging: 30 mlMaximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation": UN 2810 TOXIC LIQUID, ORGANIC, N.O.S . (4-IODOPHENYLBORONIC ACID), 6.1, III
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH302 Harmful if swallowed.H315 Causes skin irritation.H319 Causes serious eye irritation.H335 May cause respiratory irritation.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 4: Acute toxicity – Category 4Skin Irrit. 2: Skin corrosion/irritation – Category 2Eye Irrit. 2: Serious eye damage/eye irritation – Category 2STOT SE 3: Specific target organ toxicity (single exposure) – Category 3
GB
Page 1/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: Opal 570 Reagent
· Product number: FP1488A· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Acute Tox. 4 H302 Harmful if swallowed.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labelling:4-IODOPHENYLBORONIC ACID
· Hazard statementsH302 Harmful if swallowed.H315 Causes skin irritation.H319 Causes serious eye irritation.H335 May cause respiratory irritation.
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 570 Reagent
(Contd. of page 1)
44.1.4
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hoursafter the accident.
· After inhalation: In case of unconsciousness place patient stably in side position for transportation.· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.· After swallowing: Call for a doctor immediately.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.(Contd. on page 3)
GB
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 570 Reagent
(Contd. of page 2)
44.1.4
· 6.2 Environmental precautions:Dilute with plenty of water.Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Dispose contaminated material as waste according to item 13.Ensure adequate ventilation.
· 6.4 Reference to other sectionsSee Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: Keep container tightly sealed.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Avoid contact with the eyes and skin.
· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.Suitable respiratory protective device recommended.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
(Contd. on page 4) GB
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 570 Reagent
(Contd. of page 3)
44.1.4
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection:
Tightly sealed goggles
· Environmental Exposure Controls N/A
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: According to product specification
· Odour: Characteristic· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: Undetermined.Initial boiling point and boiling range: 189 °C
· Flash point: 95 °C
· Flammability (solid, gas): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto-ignition temperature: Product is not selfigniting.
· Explosive properties: Product does not present an explosion hazard.
· Explosion limits:Lower: Not determined.Upper: Not determined.
· Vapour pressure: Not determined.
· Density: Not determined.· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Fully miscible.
· Partition coefficient: n-octanol/water: Not determined.
(Contd. on page 5) GB
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 570 Reagent
(Contd. of page 4)
44.1.4
· Viscosity:Dynamic: Not determined.Kinematic: Not determined.
· Solvent content:Organic solvents: 0.0 %
· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity
Harmful if swallowed.· Primary irritant effect:· Skin corrosion/irritation
Causes serious eye irritation.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure
May cause respiratory irritation.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 570 Reagent
(Contd. of page 5)
44.1.4
· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.· Recommended cleansing agents: Water, if necessary together with cleansing agents.
SECTION 14: Transport information
· 14.1 UN-Number· ADR, IMDG, IATA UN2810
· 14.2 UN proper shipping name· ADR 2 8 1 0 T O X I C L I Q U I D , O R G A N I C , N . O . S . ( 4 -
IODOPHENYLBORONIC ACID)· IMDG, IATA T O X I C L I Q U I D , O R G A N I C , N . O . S . ( 4 -
IODOPHENYLBORONIC ACID)
· 14.3 Transport hazard class(es)
· ADR, IMDG, IATA
· Class 6.1 Toxic substances.· Label 6.1
· 14.4 Packing group· ADR, IMDG, IATA III
· 14.5 Environmental hazards: Not applicable.
· 14.6 Special precautions for user Warning: Toxic substances.· Danger code (Kemler): 60· EMS Number: F-A,S-A· Stowage Category A · Stowage Code SW2 Clear of living quarters.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
(Contd. on page 7) GB
Page 7/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Maximum net quantity per inner packaging: 30 mlMaximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation": UN 2810 TOXIC LIQUID, ORGANIC, N.O.S . (4-IODOPHENYLBORONIC ACID), 6.1, III
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH302 Harmful if swallowed.H315 Causes skin irritation.H319 Causes serious eye irritation.H335 May cause respiratory irritation.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 4: Acute toxicity – Category 4Skin Irrit. 2: Skin corrosion/irritation – Category 2Eye Irrit. 2: Serious eye damage/eye irritation – Category 2STOT SE 3: Specific target organ toxicity (single exposure) – Category 3
GB
Page 1/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: Opal 690 Reagent
· Product number: FP1497A· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Acute Tox. 4 H302 Harmful if swallowed.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labelling:4-IODOPHENYLBORONIC ACID
· Hazard statementsH302 Harmful if swallowed.H315 Causes skin irritation.H319 Causes serious eye irritation.H335 May cause respiratory irritation.
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 690 Reagent
(Contd. of page 1)
44.1.4
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· General information:
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hoursafter the accident.
· After inhalation: In case of unconsciousness place patient stably in side position for transportation.· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.· After swallowing: Call for a doctor immediately.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.
(Contd. on page 3) GB
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 690 Reagent
(Contd. of page 2)
44.1.4
· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Dispose contaminated material as waste according to item 13.Ensure adequate ventilation.
· 6.4 Reference to other sectionsSee Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: Keep container tightly sealed.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Avoid contact with the eyes and skin.
· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.Suitable respiratory protective device recommended.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
(Contd. on page 4) GB
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 690 Reagent
(Contd. of page 3)
44.1.4
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection:
Tightly sealed goggles
· Environmental Exposure Controls N/A
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: According to product specification
· Odour: Characteristic· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: Undetermined.Initial boiling point and boiling range: 189 °C
· Flash point: 95 °C
· Flammability (solid, gas): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto-ignition temperature: Product is not selfigniting.
· Explosive properties: Product does not present an explosion hazard.
· Explosion limits:Lower: Not determined.Upper: Not determined.
· Vapour pressure: Not determined.
· Density: Not determined.· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Not miscible or difficult to mix.
· Partition coefficient: n-octanol/water: Not determined.
(Contd. on page 5) GB
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 690 Reagent
(Contd. of page 4)
44.1.4
· Viscosity:Dynamic: Not determined.Kinematic: Not determined.
· Solvent content:Organic solvents: 0.0 %
· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity
Harmful if swallowed.· Primary irritant effect:· Skin corrosion/irritation
Causes serious eye irritation.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure
May cause respiratory irritation.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Opal 690 Reagent
(Contd. of page 5)
44.1.4
· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
SECTION 14: Transport information
· 14.1 UN-Number· ADR, IMDG, IATA UN2810
· 14.2 UN proper shipping name· ADR 2 8 1 0 T O X I C L I Q U I D , O R G A N I C , N . O . S . ( 4 -
IODOPHENYLBORONIC ACID)· IMDG, IATA T O X I C L I Q U I D , O R G A N I C , N . O . S . ( 4 -
IODOPHENYLBORONIC ACID)
· 14.3 Transport hazard class(es)
· ADR, IMDG, IATA
· Class 6.1 Toxic substances.· Label 6.1
· 14.4 Packing group· ADR, IMDG, IATA III
· 14.5 Environmental hazards: Not applicable.
· 14.6 Special precautions for user Warning: Toxic substances.· Danger code (Kemler): 60· EMS Number: F-A,S-A· Stowage Category A · Stowage Code SW2 Clear of living quarters.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
(Contd. on page 7) GB
Page 7/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Maximum net quantity per inner packaging: 30 mlMaximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation": UN 2810 TOXIC LIQUID, ORGANIC, N.O.S . (4-IODOPHENYLBORONIC ACID), 6.1, III
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH302 Harmful if swallowed.H315 Causes skin irritation.H319 Causes serious eye irritation.H335 May cause respiratory irritation.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 4: Acute toxicity – Category 4Skin Irrit. 2: Skin corrosion/irritation – Category 2Eye Irrit. 2: Serious eye damage/eye irritation – Category 2STOT SE 3: Specific target organ toxicity (single exposure) – Category 3
GB
Page 1/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: Spectral DAPI
· Product number: FP1490A· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008 Void· Hazard pictograms Void· Signal word Void· Hazard statements Void· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16. GB
(Contd. on page 2)
Page 2/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Spectral DAPI
(Contd. of page 1)
44.1.4
SECTION 4: First aid measures
· 4.1 Description of first aid measures· General information: No special measures required.· After inhalation: Supply fresh air; consult doctor in case of complaints.· After skin contact: If skin irritation continues, consult a doctor.· After eye contact: Rinse opened eye for several minutes under running water.· After swallowing: If symptoms persist consult doctor.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
· 5.1 Extinguishing media· Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).· 6.4 Reference to other sections
See Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handling No special measures required.· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.(Contd. on page 3)
GB
Page 3/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Spectral DAPI
(Contd. of page 2)
44.1.4
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.· Respiratory protection: Not required.· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritation Based on available data, the classification criteria are not met.· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A
(Contd. on page 5) GB
Page 5/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Spectral DAPI
(Contd. of page 4)
44.1.4
· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
· UN "Model Regulation": Void
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
GB
(Contd. on page 6)
Page 6/6
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Spectral DAPI
(Contd. of page 5)
44.1.4
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very Bioaccumulative
GB
Page 1/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: Antibody Diluent, 1X, 100mL
· Product number: ARD1001EA· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Skin Sens. 1 H317 May cause an allergic skin reaction.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labelling:Proclin-300
· Hazard statementsH317 May cause an allergic skin reaction.
· Precautionary statementsP261 Avoid breathing dust/fume/gas/mist/vapours/spray.P280 Wear protective gloves.P272 Contaminated work clothing should not be allowed out of the workplace.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P302+P352 IF ON SKIN: Wash with plenty of water.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.
(Contd. on page 2) GB
Page 2/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Antibody Diluent, 1X, 100mL
(Contd. of page 1)
44.1.4
· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· After inhalation:
Supply fresh air and to be sure call for a doctor.In case of unconsciousness place patient stably in side position for transportation.
· After eye contact: Rinse opened eye for several minutes under running water.· After swallowing: If symptoms persist consult doctor.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
· 5.1 Extinguishing media· Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Ensure adequate ventilation.
(Contd. on page 3) GB
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Antibody Diluent, 1X, 100mL
(Contd. of page 2)
44.1.4
· 6.4 Reference to other sectionsSee Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.
· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.Suitable respiratory protective device recommended.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection: Goggles recommended during refilling(Contd. on page 4)
GB
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Antibody Diluent, 1X, 100mL
(Contd. of page 3)
44.1.4
· Environmental Exposure Controls N/A
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: According to product specification
· Odour: Characteristic· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: Undetermined.Initial boiling point and boiling range: 100 °C
· Flash point: Not applicable.
· Flammability (solid, gas): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto-ignition temperature: Product is not selfigniting.
· Explosive properties: Product does not present an explosion hazard.
· Explosion limits:Lower: Not determined.Upper: Not determined.
· Vapour pressure at 20 °C: 23 hPa
· Density: Not determined.· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Not miscible or difficult to mix.
· Partition coefficient: n-octanol/water: Not determined.
· Viscosity:Dynamic: Not determined.Kinematic: Not determined.
Solids content: 1.7 %· 9.2 Other information No further relevant information available.
· Additional information N/A
GB
(Contd. on page 5)
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Antibody Diluent, 1X, 100mL
(Contd. of page 4)
44.1.4
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritation Based on available data, the classification criteria are not met.· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation
May cause an allergic skin reaction.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Antibody Diluent, 1X, 100mL
(Contd. of page 5)
44.1.4
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
· UN "Model Regulation": Void
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH301 Toxic if swallowed.H311 Toxic in contact with skin.H314 Causes severe skin burns and eye damage.H315 Causes skin irritation.H317 May cause an allergic skin reaction.H319 Causes serious eye irritation.H331 Toxic if inhaled.
(Contd. on page 7) GB
Page 7/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: Antibody Diluent, 1X, 100mL
(Contd. of page 6)
44.1.4
H335 May cause respiratory irritation.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 3: Acute toxicity – Category 3Skin Corr. 1B: Skin corrosion/irritation – Category 1BSkin Irrit. 2: Skin corrosion/irritation – Category 2Eye Irrit. 2: Serious eye damage/eye irritation – Category 2Skin Sens. 1: Skin sensitisation – Category 1STOT SE 3: Specific target organ toxicity (single exposure) – Category 3Aquatic Acute 1: Hazardous to the aquatic environment - acute aquatic hazard – Category 1Aquatic Chronic 1: Hazardous to the aquatic environment - long-term aquatic hazard – Category 1
GB
Page 1/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: PolyHRP Broad Spectrum
· Product number: ARH1001EA, ARH1A01EA· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Skin Sens. 1 H317 May cause an allergic skin reaction.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labelling:Proclin-300
· Hazard statementsH317 May cause an allergic skin reaction.
· Precautionary statementsP261 Avoid breathing dust/fume/gas/mist/vapours/spray.P280 Wear protective gloves.P272 Contaminated work clothing should not be allowed out of the workplace.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.P302+P352 IF ON SKIN: Wash with plenty of water.P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.
(Contd. on page 2) GB
Page 2/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: PolyHRP Broad Spectrum
(Contd. of page 1)
44.1.4
· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· After inhalation:
Supply fresh air and to be sure call for a doctor.In case of unconsciousness place patient stably in side position for transportation.
· After eye contact: Rinse opened eye for several minutes under running water.· After swallowing: If symptoms persist consult doctor.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
· 5.1 Extinguishing media· Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: Do not allow to enter sewers/ surface or ground water.· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Ensure adequate ventilation.
(Contd. on page 3) GB
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: PolyHRP Broad Spectrum
(Contd. of page 2)
44.1.4
· 6.4 Reference to other sectionsSee Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: None.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.
· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.Suitable respiratory protective device recommended.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection: Goggles recommended during refilling(Contd. on page 4)
GB
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: PolyHRP Broad Spectrum
(Contd. of page 3)
44.1.4
· Environmental Exposure Controls N/A
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: According to product specification
· Odour: Characteristic· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: Undetermined.Initial boiling point and boiling range: 100 °C
· Flash point: Not applicable.
· Flammability (solid, gas): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto-ignition temperature: Product is not selfigniting.
· Explosive properties: Product does not present an explosion hazard.
· Explosion limits:Lower: Not determined.Upper: Not determined.
· Vapour pressure at 20 °C: 23 hPa
· Density: Not determined.· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Not miscible or difficult to mix.
· Partition coefficient: n-octanol/water: Not determined.
· Viscosity:Dynamic: Not determined.Kinematic: Not determined.
Solids content: 1.7 %· 9.2 Other information No further relevant information available.
· Additional information N/A
GB
(Contd. on page 5)
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: PolyHRP Broad Spectrum
(Contd. of page 4)
44.1.4
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritation Based on available data, the classification criteria are not met.· Serious eye damage/irritation Based on available data, the classification criteria are not met.· Respiratory or skin sensitisation
May cause an allergic skin reaction.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: PolyHRP Broad Spectrum
(Contd. of page 5)
44.1.4
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
· UN "Model Regulation": Void
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH301 Toxic if swallowed.H311 Toxic in contact with skin.H314 Causes severe skin burns and eye damage.H317 May cause an allergic skin reaction.H331 Toxic if inhaled.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects.
(Contd. on page 7) GB
Page 7/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: PolyHRP Broad Spectrum
(Contd. of page 6)
44.1.4
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 3: Acute toxicity – Category 3Skin Corr. 1B: Skin corrosion/irritation – Category 1BSkin Sens. 1: Skin sensitisation – Category 1Aquatic Acute 1: Hazardous to the aquatic environment - acute aquatic hazard – Category 1Aquatic Chronic 1: Hazardous to the aquatic environment - long-term aquatic hazard – Category 1
GB
Page 1/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: DMSO
· Product number: DMSO0500UL· CAS Number:
67-68-5· EC number:
200-664-3· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labelled according to the CLP regulation.· Hazard pictograms
· Precautionary statementsP280 Wear protective gloves / eye protection / face protection.P264 Wash thoroughly after handling.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.P332+P313 If skin irritation occurs: Get medical advice/attention.P337+P313 If eye irritation persists: Get medical advice/attention.
(Contd. on page 2) GB
Page 2/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: DMSO
(Contd. of page 1)
44.1.4
P302+P352 IF ON SKIN: Wash with plenty of water.· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.1 Chemical characterisation: Substances· CAS No. Description
· 4.1 Description of first aid measures· After inhalation: In case of unconsciousness place patient stably in side position for transportation.· After eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.· After swallowing: If symptoms persist consult doctor.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions:
Dilute with plenty of water.Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
· 6.4 Reference to other sectionsSee Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
GB
(Contd. on page 3)
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: DMSO
(Contd. of page 2)
44.1.4
SECTION 7: Handling and storage
· 7.1 Precautions for safe handling Store in cool, dry place in tightly closed receptacles.· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: Keep container tightly sealed.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace: Not required.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Avoid contact with the eyes and skin.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer.
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection:
Tightly sealed goggles
· Environmental Exposure Controls N/A GB
(Contd. on page 4)
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: DMSO
(Contd. of page 3)
44.1.4
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: Colourless
· Odour: Odourless· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: 18.45 °CInitial boiling point and boiling range: 189 °C
· Flash point: 95 °C
· Flammability (solid, gas): Not applicable.
· Ignition temperature: 270 °C
· Decomposition temperature: Not determined.
· Auto-ignition temperature: Not determined.
· Explosive properties: Product does not present an explosion hazard.
· Density at 20 °C: 1.1 g/cm³· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Fully miscible.
· Partition coefficient: n-octanol/water: Not determined.
· Viscosity:Dynamic at 20 °C: 198 mPasKinematic: Not determined.Organic solvents: 100.0 %
· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.
(Contd. on page 5) GB
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: DMSO
(Contd. of page 4)
44.1.4
· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.
Causes serious eye irritation.· Respiratory or skin sensitisation Based on available data, the classification criteria are not met.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for waterDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: DMSO
(Contd. of page 5)
44.1.4
· Recommended cleansing agents: Water, if necessary together with cleansing agents.
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
· UN "Model Regulation": Void
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I Substance is not listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)LC50: Lethal concentration, 50 percentLD50: Lethal dose, 50 percentPBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very Bioaccumulative
(Contd. on page 7) GB
Page 7/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
44.1.4
SECTION 1: Identification of the substance/mixture and of the company/undertaking
· 1.1 Product identifier
· Trade name: AR6 Buffer
· Product number: AR600125ML, AR600250ML, AR6001KT· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.· Application of the substance / the mixture
Laboratory chemicalsPreparation
· 1.3 Details of the supplier of the safety data sheet· Manufacturer/Supplier:
PerkinElmer Inc549 Albany stBoston, MA 02118
· Further information obtainable from:US Technical Support800-762-4000
· 1.4 Emergency telephone number:If inside USA, call CHEMTREC at 1-800-424-9300If outside USA, call CHEMTREC at 1-703-527-3887
SECTION 2: Hazards identification
· 2.1 Classification of the substance or mixture· 2.1.1 Classification according to Regulation (EC) No 1272/2008
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.· 2.1.3 Additional information: For the wording of the relevant risk phrases refer to section 16.
· 2.2 Label elements· Labelling according to Regulation (EC) No 1272/2008
The product is classified and labelled according to the CLP regulation.· Hazard pictograms
GHS07
· Signal word Warning
· Hazard-determining components of labelling:Proclin-300
· Hazard statementsH315 Causes skin irritation.H319 Causes serious eye irritation.H317 May cause an allergic skin reaction.
· Precautionary statementsP261 Avoid breathing dust/fume/gas/mist/vapours/spray.P280 Wear protective gloves / eye protection / face protection.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
(Contd. on page 2) GB
Page 2/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: AR6 Buffer
(Contd. of page 1)
44.1.4
P337+P313 If eye irritation persists: Get medical advice/attention.P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.· 2.3 Other hazards· Results of PBT and vPvB assessment· PBT: Not applicable.· vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
· 3.2 Chemical characterisation: Mixtures· Description: Mixture of substances listed below with nonhazardous additions.
· Additional information: For the wording of the relevant risk phrases refer to section 16.
SECTION 4: First aid measures
· 4.1 Description of first aid measures· After inhalation:
Supply fresh air and to be sure call for a doctor.In case of unconsciousness place patient stably in side position for transportation.
· After eye contact:Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: If symptoms persist consult doctor.· 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available.· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
· 5.1 Extinguishing media· Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions.· 5.2 Special hazards arising from the substance or mixture No further relevant information available.· 5.3 Advice for firefighters· Protective equipment: Wear self-contained respiratory protective device.
SECTION 6: Accidental release measures
· 6.1 Personal precautions, protective equipment and emergency procedures Not required.· 6.2 Environmental precautions: No special measures required.· 6.3 Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).(Contd. on page 3)
GB
Page 3/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: AR6 Buffer
(Contd. of page 2)
44.1.4
Ensure adequate ventilation.· 6.4 Reference to other sections
See Section 7 for information on safe handling.See Section 8 for information on personal protection equipment.See Section 13 for disposal information.
SECTION 7: Handling and storage
· 7.1 Precautions for safe handlingEnsure good ventilation/exhaustion at the workplace.Prevent formation of aerosols.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities· Storage:· Requirements to be met by storerooms and containers: No special requirements.· Information about storage in one common storage facility: Not required.· Further information about storage conditions: Keep container tightly sealed.· 7.3 Specific end use(s) For research use only.
SECTION 8: Exposure controls/personal protection
· Additional information about design of technical facilities: No further data; see item 7.
· 8.1 Control parameters· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored atthe workplace.
· 8.2 Exposure controls· Personal protective equipment:· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Avoid contact with the eyes and skin.
· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.Suitable respiratory protective device recommended.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer. As the product is a preparation of several substances, the resistanceof the glove material can not be calculated in advance and has therefore to be checked prior to the application.
(Contd. on page 4) GB
Page 4/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: AR6 Buffer
(Contd. of page 3)
44.1.4
· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.
· Eye protection:
Tightly sealed goggles
· Environmental Exposure Controls N/A
SECTION 9: Physical and chemical properties
· 9.1 Information on basic physical and chemical properties· General Information· Appearance:
Form: FluidColour: According to product specification
· Odour: Characteristic· Odour threshold: Not determined.
· pH-value: N/A
· Change in conditionMelting point/freezing point: Undetermined.Initial boiling point and boiling range: 100 °C
· Flash point: Not applicable.
· Flammability (solid, gas): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto-ignition temperature: Product is not selfigniting.
· Explosive properties: Product does not present an explosion hazard.
· Explosion limits:Lower: Not determined.Upper: Not determined.
· Vapour pressure at 20 °C: 23 hPa
· Density: Not determined.· Relative density Not determined.· Vapour density Not determined.· Evaporation rate Not determined.
· Solubility in / Miscibility withwater: Not miscible or difficult to mix.
· Partition coefficient: n-octanol/water: Not determined.
· Viscosity:Dynamic: Not determined.Kinematic: Not determined.
(Contd. on page 5) GB
Page 5/7
Safety data sheetaccording to 1907/2006/EC, Article 31
· 9.2 Other information No further relevant information available.
· Additional information N/A
SECTION 10: Stability and reactivity
· 10.1 Reactivity No further relevant information available.· 10.2 Chemical stability· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.· 10.3 Possibility of hazardous reactions No dangerous reactions known.· 10.4 Conditions to avoid No further relevant information available.· 10.5 Incompatible materials: No further relevant information available.· 10.6 Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11: Toxicological information
· 11.1 Information on toxicological effects· Acute toxicity Based on available data, the classification criteria are not met.· Primary irritant effect:· Skin corrosion/irritation
Causes serious eye irritation.· Respiratory or skin sensitisation
May cause an allergic skin reaction.· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)· Germ cell mutagenicity Based on available data, the classification criteria are not met.· Carcinogenicity Based on available data, the classification criteria are not met.· Reproductive toxicity Based on available data, the classification criteria are not met.· STOT-single exposure Based on available data, the classification criteria are not met.· STOT-repeated exposure Based on available data, the classification criteria are not met.· Aspiration hazard Based on available data, the classification criteria are not met.
SECTION 12: Ecological information
· 12.1 Toxicity· Aquatic toxicity: No further relevant information available.· 12.2 Persistence and degradability N/A· 12.3 Bioaccumulative potential N/A· Behaviour in environmental systems: N/A· 12.4 Mobility in soil No further relevant information available.· Ecotoxicity: N/A· Ecotoxical effects: N/A· Additional ecological information:· Other adverse effects: Generally not hazardous for water· 12.5 Results of PBT and vPvB assessment· PBT: Not applicable.
(Contd. on page 6) GB
Page 6/7
Safety data sheetaccording to 1907/2006/EC, Article 31
Printing date 02.03.2017 Revision: 02.03.2017
Trade name: AR6 Buffer
(Contd. of page 5)
44.1.4
· vPvB: Not applicable.· 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations
· 13.1 Waste treatment methods· Recommendation Must be specially treated adhering to official regulations.
· Uncleaned packaging:· Recommendation: Disposal must be made according to official regulations.
· 14.5 Environmental hazards:· Marine pollutant: No
· 14.6 Special precautions for user Warning: Corrosive substances.· Danger code (Kemler): 80· EMS Number: F-A,S-B· Stowage Category A · Stowage Code SW2 Clear of living quarters.
· 14.7 Transport in bulk according to Annex II ofMarpol and the IBC Code Not applicable.
Maximum net quantity per inner packaging: 30 mlMaximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation": UN 1760 CORROSIVE LIQUID, N.O.S. (PROCLIN-300), 8, III
SECTION 15: Regulatory information
· 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
· Directive 2012/18/EU· Named dangerous substances - ANNEX I None of the ingredients is listed.· REGULATION (EC) No 1907/2006 ANNEX XVII Conditions of restriction: 3· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other informationThe information provided in this Material Safety Data Sheet is based on our present knowledge,and believed to be correct at the date of publication. However, no representation is madeconcerning its accuracy and completeness. It is intended as guidance only, and is not to beconsidered a warranty or quality specification. All materials may present unknown hazards, andshould be used with caution. Although certain hazards are described, we cannot guarantee thatthese are the only hazards which exist. PerkinElmer, Inc. shall not be heldliable for any damage resulting from handling or from contact with the product.
· Relevant phrasesH301 Toxic if swallowed.H311 Toxic in contact with skin.H314 Causes severe skin burns and eye damage.H317 May cause an allergic skin reaction.H331 Toxic if inhaled.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects.
· Abbreviations and acronyms:ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the InternationalCarriage of Dangerous Goods by Road)IMDG: International Maritime Code for Dangerous GoodsIATA: International Air Transport AssociationGHS: Globally Harmonised System of Classification and Labelling of ChemicalsEINECS: European Inventory of Existing Commercial Chemical SubstancesELINCS: European List of Notified Chemical SubstancesCAS: Chemical Abstracts Service (division of the American Chemical Society)PBT: Persistent, Bioaccumulative and ToxicvPvB: very Persistent and very BioaccumulativeAcute Tox. 3: Acute toxicity – Category 3Skin Corr. 1B: Skin corrosion/irritation – Category 1BSkin Irrit. 2: Skin corrosion/irritation – Category 2Eye Irrit. 2: Serious eye damage/eye irritation – Category 2Skin Sens. 1: Skin sensitisation – Category 1Aquatic Acute 1: Hazardous to the aquatic environment - acute aquatic hazard – Category 1Aquatic Chronic 1: Hazardous to the aquatic environment - long-term aquatic hazard – Category 1