-
MAIN FEATURES OF MS.P60 COLUMN FORMWORK:
MS.P60 COLUMN FORMWORK is a system for efficient concrete
construction technology. MS.P60 COLUMN FORMWORK increased
efficiency and reduces costs through the following:
STEEL: Hot rolled steel, highly resisting steel type ..
Frame depth: 100mm
Frame Thickness: 6mm
MAX CONCRETE PRESSURE: 60 kN/m2
PLYWOOD: long life plywood with thickness 18 mm delivered with
panels.
PANELS DIMNS: available width sizes from 650 to 1300mm and
height sizes from 900 to 3600mm.
COLUMNS CONCRETE DIMNS: guaranteed the largest possible
ranges with the least possible amount of panels with 50 mm
increments can be shuttered square or rectangular columns.
SYSTEM HANDLED: crane handling operation allow using system
in
both small and large construction sites.
ACCESSORIES: full range and interchangeability of all
accessories.
MS.P60 column formwork Main Features
-
MS.P60 column formwork
MS.P60 column panel
Lifting eye CIW
Access bracket post
Access bracket
Timber board
washer nut
bolt D16-L260mm
head plate CIW
tilt up shore X4
tilt up shore X1
double base plate CIW
Main Features
W Section
Ply wood
-
Lateral concrete pressure according to DIN 18218 Fresh concrete
temperature 15 OC without retarding admix
Fresh concrete temperature 15 OC with setting retarded by 5
h
MS.P60 column formwork Technical data
Prerequisites: Compaction with internal vibrator Weight of fresh
concrete 25 kN/m Setting of concrete 5 h
-
Panels arrangement
MS.P60 column panels guaranteed the largest possible range
of
sizes with the least possible amount of panels, the following
table
showing panels arrangement to fit the needed column concrete
dimension
Panel arrangement(cm)
Column concrete dimension (cm)
Min dim Max dim
Direction X
Direction Y
Width Length Width Length B L B L
65
65
25 25
25 25
50
50
95 80 130 115
95 95
80 80
130 115
130 130 115 115
65
(65+95) 100&70
50
145
(65+130) 135&70 180
(95+95) 100 165 (130+95) 135&100 210
(130+130) 135 245
95
(65+95) 100&70
80
145
(65+130) 135&70 180
(95+95) 100 165 (130+95) 135&100 210
(130+130) 135 245
130
(65+95) 100&70
115
145
(65+130) 135&70 180 (95+95) 100 165
(130+95) 135&100 210
(130+130) 135 245
Any other column dimensions within or out previous ranges with
50
mm increments and can be shuttered also.
MS.P60 column formwork Technical data
100mm
50mm
-
MS.P60 column formwork Technical data
B=115 cm
L=
11
5
cm
B=L=25 cm
Max & Min concrete column dim for panel 1.30m
Y
X
MS.P60 Column Panel
1.30m
B=80 cm L=
80
cm
B=L=25 cm
Max & Min concrete column dim for panel 0.95m
Y
X
50 cm 50 cm
B=L=25 cm
Max & Min concrete column dim for panel 0.65m
Y
X
-
Push pull props
Push pull props available in different ranges to fit needed
length and applied
load showing in the following table:-
0
Push pull props standard ranges and working load
Working Range(L)
Tube Diameter
Working Load Weight Code No
Min(m) Max(m) (mm) (ton) (Kg) PP1 1.00 1.50 48 2.75 9.00
PP2 1.30 1.80 48 1.75 9.83 PP3 1.65 2.35 48 1.25 13.14 PP4 1.65
2.35 60 2.25 15.29 PP5 2.15 2.90 60 1.70 17.17 PP6 2.65 3.40 60
1.25 18.99 PP7 3.15 3.90 60 1.00 23.07
MS.P60 column formwork Technical data
L (working range)
-
Tilt-up shores
Tilt-up shores available in different ranges to fit needed
length and applied load
as showing in the following table and chart:-
1. Tilt-up shores ranges
2. Tilt-up shores Safe working loads
Working Range(L) Weight
Code No
Min(m) Max(m) (Kg)
X0 1.04 1.83 12.70
X1 1.75 3.12 21.10
X2 1.98 3.35 22.00
X3 2.59 3.96 24.60
X4 3.20 4.88 29.30
MS.P60 column formwork Technical data
Exte
nsi
on
(m
)
Safe working load (kg)
-
MS.P60 column formwork
Concrete Column
dimensions
400x400x3600 mm
400x400
mm
MS.P column panel
650x3600 mm
MS.P column panel
650x3600 mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
400x400x3600 mm
400x400
mm
MS.P column panel
650x3600 mm
MS.P column panel
650x3600 mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
700x700x3600 mm
MS.P column panel
950x3600 mm
MS.P column panel
950x3600 mm
700x700
mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
1150x1150x3600 mm
MS.P column panel
1300x3600 mm
MS.P column panel
1300x3600 mm
1150x1150
mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
300x600x3600 mm
MS.P column panel
950x3600 mm
MS.P column panel
650x3600 mm 300x600
mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
500x1000x3600 mm
MS.P column panel
1300x3600 mm MS.P column panel
650x3600 mm
500x1000 mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
700x1150x3600 mm
MS.P column panel
1300x3600 mm MS.P column panel
950x3600 mm
700x1150 mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
400x2000x3600 mm
MS.P column panel
950x3600 mm
MS.P column panel
650x3600 mm 400x2000
mm
MS.P column panel
1300x36000 mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
500x3500x3600 mm
MS.P column panel
1300x3600 mm
MS.P column panel
650x3600 mm
500x3500 mm
Sketch Applications
-
MS.P60 column formwork
MS.P column panel
950x1200 mm
Concrete Column
dimensions
700x700x4800 mm
MS.P column panel 950x1200 mm
MS.P column panel
950x3600 mm
700x700
mm
Sketch Applications
-
MS.P60 column formwork
Concrete Column
dimensions
700x700x7200 mm
MS.P column panel
950x3600 mm
700x700
mm MS.P column panel
950x3600 mm
Sketch Applications
-
y
PRODUCT
CODE WEIGHT(kg)
1 wing nut 212004
PRODUCT
CODE WEIGHT(kg)
1 Counter plate120x120x8mm 212001
2 Counter plate120x120x6mm 212002
3 Counter plate120x120x4mm 212003
MS.P60 column formwork Accessories Component
Counter Plate (Anchor plate/Tie plate)
Wing Nut
Used with wing nut and tie rod to clamp
column shutters together.
Used with wing nut and boltD16-
L260mm for fixation of four sides of the
panels of column.
Used with boltD16-L120mm for fixation
of wailing splices with panel.
Used with counter plate and tie rod to
clamp column shutters together.
Used with counter plate and boltD16-
L260mm for fixation of four sides of the
panels of column.
120mm
120mm
M16
21mm
-
PRODUCT CODE WEIGHT(kg)
1 Washerd nut 103mm 212005
PRODUCT CODE WEIGHT(kg)
1 Hexagon Nut D16-L30mm
212006
MS.P60 column formwork Accessories Component
Hexagon Nut D16-L18mm
Used with bolt D16-L80mm for
connecting panels with each others
vertically and horizontally.
Used with tie rod to clamp column
shutters together.
Used with boltD16-L260mm for fixation
of four sides of the panels of column.
Washerd Nut
M16
103mm
M16 mm
-
L (
1m
2
m
3m
4
m
5m
6
m )
PRODUCT CODE WEIGHT(kg)
1 M-Tie rod 16mm 212007
2 M-Tie rod 20mm 212008
PRODUCT CODE WEIGHT(kg)
1 Plastic sleeve 212009
PRODUCT CODE WEIGHT(kg)
1 Plastic cone 212010
MS.P60 column formwork Accessories Component
M-Tie Rod
Used to fix complementary formwork
during the pouring operation.
Produced in standard length of 6 meters
and cut to necessary length on the
construction site.
Safe Working Load 65 KN (According To
Regulation DIN 18216).
Diameter 16 mm.
L : length of tie rod
Plastic sleeve (pvc tube)
Plastic cone(Tie cone)
The expandable PVC tube allows the tie
bars to be removed after concrete has
been placed.
The polyurethane cone is easily extracted
after use.
The cone gives a cover of 10 mm to the
PVC tubular sleeve / spacer.
16mm
O.D 25mm
O.D 20mm
-
Ply wood
PRODUCT CODE WEIGHT(kg)
1 M-Tie rod 212007
2 Plastic tube 212009
3 Plastic cone 212010
4 Counter plate 212001
5 Wing nut 212004
6 Washerd nut 212005
MS.P60 column formwork Accessories Component
M-Tie Rod With Washer nut
1 2
3
4
5
6
M-Tie Rod with Counter plate
Counter plate
Counter plate
Counter plate
W section
-
PRODUCT CODE WEIGHT(kg)
1 Wailing splice 800 mm 212021
2 Wailing splice 650 mm 212022
3 Counter plate 212023
4 M-Bolt D16mm-L120mmET 212024
MS.P60 column formwork
MS.P60 Wailing Splices
MS.P60 Lifting Eye
Accessories Component
Available in two sizes, using for
connecting panels with each other and
aligns them vertically and horizontally,
to rigidify the over lapped formwork.
Used for system handling by crane
(It should be placed near the frame
stiffening)
PRODUCT CODE WEIGHT(kg)
1 Lifting eye angle 212025
2 Hexagon Nut 212026
3 M-Bolt D16mm-L60mm FT 212027
0
1
2
3
4
1
2
3
M16mm
650mm
800mm
401mm
100mm
80mm
100mm
22mm
30mm
30mm
-
PRODUCT CODE WEIGHT(kg)
1 Access bracket 212028
2 Access bracket post 212029
3 M-Bolt D16mm-L120mm ET 212030
4 Rivet Pin with spring clips 212031
MS.P60 Access Bracket C/W
MS.P60 column formwork Accessories Component
Used for construction of pouring and
services platforms, helping labors in
erection and pouring.
The work platforms should have timber
board
Timber board should use in its position at
the middle and top of the post.
It is recommended to maintain the
distance between two brackets not
greater than 2.40 meters.
0
1
2
3
4
750mm
900mm
1000mm
18mm
18mm
9mm
100mm
-
PRODUCT CODE WEIGHT(kg)
1 Swivel head 212032
2 M-Bolt D16mm-L120mmET 212033
3 Rivet Pin 212034
MS.P60 column formwork Accessories Component
Swivel Head C/W
Head Plate C/W
Used For fixing Push Pull Prop
or tilt up shore with Formwork
Panel easily and quickly.
Used For fixing Push Pull Prop or
tilt up shore with Formwork Panel
easily and quickly.
PRODUCT CODE WEIGHT(kg)
1 Head plate 212035
2 M-Bolt D16mm-L60mm ET
212036
3 Rivet Pin 212037
1
2
3
1
2
3
18mm
18mm
100mm
150mm
18mm
120mm
70mm 70mm
18mm
-
PRODUCT CODE WEIGHT(kg)
1 Double base plate 212038
2 Rivet Pin 212039
PRODUCT CODE WEIGHT(kg)
1 Rivet Pin 16mm
212039
MS.P60 column formwork Accessories Component
Double Base plate C/W
Rivet Pin with Spring Clips
Used For fixing Push Pull Prop or
tilt up shore in the ground in
order to avoid turnover of the
formwork.
Used to join and fix push pull prop
or tilt up shore with double base
and swivel head or head plate
1
2
16mm
18mm
250mm
100mm
60mm
108mm
18mm
-
PRODUCT CODE WEIGHT(kg)
1 Tilt up shore x1 212040
2 Tilt up shore x4 212041
3 Head plate C/W 212042
4 Double plate C/W 212043
MS.P60 column formwork Accessories Component
Tilt Up Shore (X1 X4)
Tilt up shore Allows to Have
Formwork Perfectly Vertical and
Can Reach up To 4.8 column
formwork Height.
2
1
4 3
60mm
-
PRODUCT CODE WEIGHT(kg)
1 Push pull props PP2 212044
2 Push pull props PP6 212045
3 Swivel Head C/W 212046
4 Double plate C/W 212047
2
4
MS.P60 column formwork Accessories Component
Tilt up Shore with Push pull props
Push pull prop Allows to Have
Formwork Perfectly Vertical. Push pull prop available with
different standard ranges as shown
in technical data
3
3
-
Complete with washer nut
Used for fixation of the four sides of
The panels of column
Complete with counter plate
Used in fixation of the access bracket with panels
Used in fixation of the splices with panels
Used in fixation of lifting eye with panels
Used in fixation of swivel head
and head plate with panels
PRODUCT CODE WEIGHT(kg)
1 M-Bolt D16mm-L260mm FT 212048
PRODUCT CODE WEIGHT(kg)
1 M-Bolt D16mm-L120mm ET 212049
PRODUCT CODE WEIGHT(kg)
1 M-Bolt D16mm-L60mm ET 212050
MS.P60 column formwork Accessories Component
D16mm-L120mm (English thread)
D16mm-L60mm (English thread)
MS.P60 bolts
D16mm-L260mm (French thread)