American Metric ® Corporation Ametric ® 8 GROUP: 005 Single Roller Chain Double Roller Chain Triple Roller Chain Chain Size Pin Diameter 6 x 2.8 8 x 1/8 3/8 x 7/32 1/2 x 5/16 5/8 x 3/8 3/4 x 7/16 1 x 17 1¼ x 3/4 1½ x 1 1¾ x 1¼ 2 x 1¼ 2½ x 1½ 3 x 1¾ 2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89 29.24 1.49 1.85 2.31 3.28 4.45 3.66 3.66 4.09 3.58 3.97 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89 29.24 Breaking Strength N 2,200 3,000 5,000 9,000 18,000 8,200 10,000 12,000 6,800 6,800 22,400 29,000 60,000 95,000 160,000 200,000 250,000 355,000 560,000 lbs/ft kg/m Weight 0.05 0.07 0.12 0.28 0.47 0.19 0.17 0.28 0.26 0.42 0.61 0.79 1.80 2.35 4.57 5.71 7.06 11.02 16.80 0.08 0.15 0.18 0.41 0.70 0.28 0.26 0.42 0.38 0.62 0.91 1.18 2.68 3.50 6.80 8.50 10.5 16.4 25.0 C.L. Width Extension k 2.5 2.9 3.1 3.3 3.9 1.5 – 1.5 2.0 1.5 4.1 4.6 5.4 6.1 6.6 7.4 7.9 10 10 5 x 2.5 6 x 2.8 8 x 1/8 3/8 x 7/32 1/2 x 5/16 1/2 x 1/8 1/2 x 3/32 1/2 x 3/16 1/2 X 1/4 1/2 x 1/4 5/8 x 3/8 3/4 x 7/16 1 x 17 1¼ x 3/4 1½ x 1 1¾ x 1¼ 2 x 1¼ 2½ x 1½ 3 x 1¾ Ametric® Chain No. 02 12 22 32* 42 43 45 46 47 48 52 62 82 102 122 142 162 202 242 ISO No. 03B 04B 05B 06B 08B 081 082 083 085 085 10B 12B 16B 20B 24B 28B 32B 40B 48B Pitch p 5.00 6.00 8.00 9.52 12.70 12.70 12.70 12.70 12.70 12.70 15.87 19.05 25.40 31.75 38.10 44.45 50.80 63.50 76.20 Between Inner Plates b 1 2.50 2.80 3.00 5.72 7.75 3.30 2.38 4.88 6.38 6.40 9.65 11.68 17.02 19.56 25.40 30.99 30.99 38.10 45.72 Roller Diameter d 1 3.20 4.00 5.00 6.35 8.51 7.75 7.75 7.75 7.77 7.75 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37 48.26 Chain Width* l 7.4 7.4 8.6 13.5 17 10.2 8.2 12.9 14.0 15.4 19.6 22.7 36.1 43.2 53.4 65.1 67.4 82.6 99.1 0.23 0.36 0.78 1.36 1.82 2.38 5.30 7.30 13.4 16.6 21.0 32.6 50.0 2012 2022 2032* 2042 2052 2062 2082 2102 2122 2142 2162 2202 2242 04B-2 05B-2 06B-2 08B-2 10B-2 12B-2 16B-2 20B-2 24B-2 28B-2 32B-2 40B-2 48B-2 6.00 8.00 9.52 12.70 15.87 19.05 25.40 31.75 38.10 44.45 50.80 63.50 76.20 2.80 3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 38.10 45.72 4.00 5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37 48.26 2.9 3.1 3.3 3.9 4.1 4.6 5.4 6.1 6.6 7.4 7.9 10 10 13.3 14.3 23.8 31 36.2 42.2 68 79 101 124 126 154 190 1.85 2.31 3.28 4.45 5.08 5.72 8.28 10.19 14.63 15.90 17.81 22.89 29.24 5,000 7,800 16,900 32,000 44,500 57,800 106,000 170,000 280,000 360,000 450,000 630,000 1,000,000 0.15 0.24 0.52 0.91 1.22 1.60 3.56 4.91 9.00 11.15 14.11 21.91 33.60 10,200 23,600 47,500 66,700 86,700 160,000 250,000 425,000 530,000 670,000 950,000 1,500,000 3022 3032* 3042 3052 3062 3082 3102 3122 3142 3162 3202 3242 8 x 1/8 3/8 x 7/32 1/2 x 5/16 5/8 x 3/8 3/4 x 7/16 1 x 17 1¼ x 3/4 1½ x 1 1¾ x 1¼ 2 x 1¼ 2½ x 1½ 3 x 1¾ 05B-3 06B-3 08B-3 10B-3 12B-3 16B-3 20B-3 24B-3 28B-3 32B-3 40B-3 48B-3 8.00 9.52 12.70 15.87 19.05 25.40 31.75 38.10 44.45 50.80 63.50 76.20 3.00 5.72 7.75 9.65 11.68 17.02 19.56 25.40 30.99 30.99 38.10 45.72 5.00 6.35 8.51 10.16 12.07 15.88 19.05 25.40 27.94 29.21 39.37 48.26 0.36 0.79 1.35 1.81 2.10 5.04 7.12 13.44 16.8 21.5 32.72 50.4 0.54 1.18 2.01 2.70 3.12 7.50 10.6 20.0 25.0 32.0 48.7 75.0 3.1 3.3 3.9 4.1 4.6 5.4 6.1 6.6 7.4 7.9 10 10 19.9 34 44.9 52.8 61.7 99.9 116 150 184 184 227 281 Note: *= straight side bar construction (DIN 8180/8187 and BS 228) Standard Metric Roller Chain Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer. 1-005 - 00825 Inner Link Outer Link (Riveted Conn. Link) Conn. Link with Spring Clip Conn. Link with Cotter Pins Half Link with Cotter Pin Offset Link Roller Link or Inner Link - Used for replacement of dam- aged rollers. Offset Link - Used to assemble chain strands when an odd number of pitches is desired. Connector Link - Used to asemble chain strands when an even number of pitches is desired.
87
Embed
001 Front Cover - American Metric Inc, Online Store · 2017-10-09 · American Metric® Corporation Ametric ® 10 Single Chain Double Chain Triple Chain 22 N 32 N* 42 N 52 N 62 N
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
American Metric® CorporationAmetric®
8 GROUP: 005
Single Roller Chain
Double Roller Chain
Triple Roller Chain
ChainSize
PinDiameter
6 x 2.88 x 1/83/8 x 7/321/2 x 5/165/8 x 3/83/4 x 7/161 x 171¼ x 3/41½ x 11¾ x 1¼2 x 1¼2½ x 1½3 x 1¾
5 x 2.56 x 2.88 x 1/83/8 x 7/321/2 x 5/161/2 x 1/81/2 x 3/321/2 x 3/161/2 X 1/41/2 x 1/45/8 x 3/83/4 x 7/161 x 171¼ x 3/41½ x 11¾ x 1¼2 x 1¼2½ x 1½3 x 1¾
SS = Stainless SteelR.C.L. = Riveted Connector Link
Form 1
Form 3
Form 2
Ametric®Chain
No. Form
813.1813.2813.3813.4
816.1816.2816.3
819.1825.1838.1
850.1850.2850.3850.3 SS899.1
2212
223
211
11333
BreakingStrength
N
10,00014,00010,00013,500
15,00015,00013,500
25,00045,00045,000
50,000100,00050,00032,00045,000
Weightkg/m
0.340.680.650.64
0.740.830.87
1.072.282.62
3.304.102.152.151.46
PinBore
d
4.24.04.0
4.55
5.05.0
5.18
5.07.0510.2
14.414.48.28.28.2
OverallWidth
l
10.219.017.016.4
17.020.020.0
22.532.234.5
35.635.627.027.027.0
RollerDiameter
d1
7.758.518.518.51
10.1610.1610.16
12.0715.8818.00
26.0026.0030.0030.0030.00
BetweenInner Plate
b1
3.39.57.757.85
6.59.59.65
11.7012.7015.20
15.0015.0010.010.010.0
Pitchp
mm
12.7012.7012.7012.70
15.8815.8815.88
19.0525.4038.10
50.0050.0050.8050.80100.00
ISONo.
08B-1
10B-1
12B-116B-1
Sprockets available upon request.
Metric Hollow Pin Chain
1-005 - 090512
OverallMax.
g
10.511.812.2
-
14.714.7
-
16.123.028.0
-40.026.026.0
-
Group: 005
American Metric® CorporationAmetric®
13
O-Ring Chain
X-Ring Chain
Ametric Part Number
Pitch(P)
Width between Inner Plates
(W)(Min)
RollerDiameter
(D)(Max)
Bearing Pin Diameter
(d)(Max)
BreakingLoad
J415 ORJ428 ORJ520 ORJ525 ORJ530 ORJ630 ORJ460 OR
12.7012.7015.87515.87515.87519.0519.05
5.157.956.387.959.529.5212.7
7.758.51
10.1610.1610.1611.9011.90
4.074.465.305.305.305.955.95
2,2003,2003,2003,6004,2003,600
Automotive O-Ring Chains (Also For Industrial Application)
Intl. Ref. No.
Ametric Part Num-
berPitch(P)
Width between
Inner Plates
(W)(Min)
Roller Diameter
(D)(Max)
IP Height(H1)
(Max)
OP Height
(H2)(Max)
IP Thick-ness(T1)
(Max)
OP Thick-ness(T2)
(Max)
Width Over
Bearing Pin(A)
(Max)
Bearing Pin Diam-
eter(d)
(Max)
Width Over Joint
Fasten-ers(B)
Average Weight
Per Meter(Kg)
Tensile Strength
KN(Min)
08B OR10B OR
42 OR52 OR
12.7015.875
7.759.65
8.5110.16
11.5614.48
10.5713.51
1.581.58
1.501.58
19.0021.94
4.455.06
20.3023.53
0.6930.921
185.59231.48
Other O-Ring Chains
Ametric O-Ring Chain with unique design are engineered to offer superior resistance to wear.
Ametric Part Number
Pitch(P)
Width between Inner Plates
(W)(Min)
RollerDiameter
(D)(Max)
Bearing Pin Diameter
(d)(Max)
J428 XRJ520 XRJ525 XRJ530 XR
12.7015.87515.87515.875
7.956.387.959.52
8.5110.1610.1610.16
4.465.305.305.30
2,2003,2003,2003,600
BreakingLoad
X-Ring Chains
1-005-030624
1-005-090512 Group: 005
American Metric® CorporationAmetric®
14
Non-Standard Metric Roller Chain
ChainSize
Ametric®Chain
No.
BetweenPlates
b1
PitchP
mm
RollerDiameter
d1
OverallWidth
I1
Weightkg/m
BreakingStrength
N
3/8 x 1/81/2 x 7/32
1/2 x 3/161/2 x 1/41/2 x 3/161/2 x 1/41/2 x 5/161/2 x 3/8
5/8 x 1/43/4 x 7/163/4 x 17/32
3/4 x 7/161 x 1/21 x 1/21 x 1/2
30 x 17 mm35 mm x 3/4
39.149
47.147.246.147.442.147.5
5162.163.4
63.581.485.285.3
630.1635.1
6.008.51
7.757.757.758.518.518.51
10.1612.0712.07
12.0712.7014.0015.88
15.8819.05
9.6014.60
12.7019.3015.9019.7020.9023.40
20.5028.5033.20
28.5032.6035.4036.30
41.5046.10
0.260.72
0.330.500.550.660.720.81
0.781.511.67
1.511.582.382.18
3.502.90
8,00018,200
8,20016,00017,50018,00020,00018,200
22,40040,00035,000
45,00035,00058,00063,000
60,00085,000
3.305.21
4.886.404.886.407.949.53
6.4811.6813.50
11.6812.7012.7012.70
17.0219.60
9.5212.70
12.7012.7012.7012.7012.7012.70
15.8719.0519.05
19.0525.425.425.4
30.0035.00
Non-Standard Straight Side Metric Roller Chain
ChainSize
Ametric®Chain
No.
BetweenPlates
b1
PitchP
mm
RollerDiameter
d1
ChainWidth
IWeightkg/m
BreakingStrength
N
3/8 x 5/321/2 x 5/165/8 x 3/83/4 x 7/161 x 17 mm
1¼ x 3/41½ x 1/2100 mm x 1
1/2 x 5/16
3147.653.163.385.4
102.1122.1699.1
2047.6
6.358.51
10.1612.0715.88
19.0525.4025.40
1.23.94.14.65.4
6.16.66.6
0.380.700.911.182.68
3.506.805.70
9,10018,00022,40029,00060,000
95,000160,000180,000
3.947.759.6511.6817.02
19.5625.4025.40
9.5212.7015.8719.0525.4
31.7538.10100.00
Double Roller Chain5/8 x 3/8 3/4 x 7/161 x 17 mm1¼ x 3/4 1½ x 1/2
2053.12063.32085.42102.12122.1
WidthInner Plates
b2
PinDiameter
d2
3.314.455.085.728.28
10.1914.6314.63
Con. LinkWidth
k
11.6017.0019.6022.7036.10
43.2053.4053.40
10.5011.3013.2815.6225.04
29.0037.9037.90
8.5110.1612.0715.8819.0525.40
3.94.14.65.46.16.6
1.361.822.385.307.30
13.40
7.759.6511.6817.0219.5625.40
12.7015.8719.0525.1031.7538.10
4.455.085.728.28
10.1914.63
31.0036.2042.2068.0079.00
101.00
11.3013.2815.6225.4029.0037.90
32,00040,00053,000106,000170,000280,000
Metric Special Roller Chain
1-005 - 090514Group: 005
WidthPlates
b2
5.458.70
7.209.789.309.9311.30
10.0817.0019.70
17.0019.0020.0021.07
25.4027.00
PinDiameter
d2
2.784.45
3.663.974.184.454.45
5.086.105.72
6.107.007.508.28
8.2810.40
American Metric® CorporationAmetric®
15
Metric Chain Attachments
Note: The above attachments are produced as connector links for self assembly. Chain with riveted attachments can be produced assem-bled-to-order in our South Carolina facility.
A1, K1 and R1 Connector Links and Inner LinksChain
No.p
Pitchb2
max.
A1
K1
R1
d1max.
b1min. m DL I F H s
2232
434646 (9076)*47.14242 (DIN)
5252 (DIN)
6262 (DIN)
8282 IL83 (DIN)83630.1
102102 IL103122123142162163
gmax.
FBmin.
89.525
12.712.712.712.712.712.7
15.87515.875
19.0519.05
25.425.425.425.430
31.7531.7531.7538.138.144.4550.850.8
35.72
3.34.884.884.887.757.75
9.659.65
11.6811.68
17.0217.027.757.7517.02
19.5619.569.6525.411.6830.9930.9917.02
4.778.53
5.87.98.67.211.311.3
13.2813.28
15.6215.62
25.425.411.311.325.4
2929
13.2837.915.6246.545.525.4
56.35
7.757.757.757.758.518.51
10.1610.16
12.0712.07
15.8815.878.518.5115.88
19.0519.0510.1625.412.0727.9429.2115.88
7.18.2
9.910.310.29.911.811.7
14.714.2
16.116.4
2121
11.811.821
26.426.414.733.416.137
42.221
5,0009,000
8,2009,000
12,0008,200
18,00018,000
22,40022,400
29,00029,000
60,00060,00018,00018,00060,000
95,00095,00022,400
160,00029,000
200,000250,00060,000
88
10.51611
10.512.511
14.114.28
15.8515.85
18.8519131835
26.1525.25
153819455030
33.5
3.53.54.33.54.54.5
5.25.5
5.66.6
6.86.84.54.89
98.45.5116.614149
6.69.5
910.610.29.7
13.112.7
15.915.9
17.519.05
25.425.413.113.128.9
31.7531.7516.744
18.554.154
28.9
1213.5
15.116.615
15.819
18.2
23.822.315
26.17525.8
37.437.419.319.345.1
4541.926.7642678
76.343.8
56.5
777710
8.89
10.410.31
1213.46
15.915.9108.620
19.819.85
102511323518
0.81.25
0.951.251.350.951.61.58
1.581.58
1.811.81
3.053.61.61.53
3.534.41.75
1.8663
1-005 - 090512
*Obsolete Part numbers. Current Inventory will not be replenished.
DIN = German Standard Series Attachment
Group: 005
American Metric® CorporationAmetric®
16
Metric Chain Attachments
Note: The above attachments are produced as connector links for self assembly. Chain with riveted attachments can be produced assem-bled-to-order in our South Carolina facility.
EP1, EP2 And EPX Connector Links and Inner Links
ChainNo.
222222
32323232
4343
46
47.1
4242424242
52525252
626262
828282
8383
630.1
102
103103
122
123123
142
162
163163
203203
EP1EP2EPX
EP1 = One extended pin • EP2 = Two extended pins, one side • EPX = One Extra Long Extended Pin
Note: The above attachments are produced as connector links for self assembly. Chain with riveted attachments can be produced assem-bled-to-order in our South Carolina facility.DIN = German Standard Series Attachment
1-005 - 090512
SA1
SK1
Group: 005
American Metric® CorporationAmetric®
18
SA2
SK2
Metric Chain Attachments
SA2, and SK2 Connector Links and Inner Links
Note: The above attachments are produced as connector links for self assembly. Chain with riveted attachments can be produced assem-bled-to-order in our South Carolina facility.DIN = German Standard Series Attachment
ChainNo.
pPitch
b1min.
b2max.
d1max.
gmax.
FBmin. m DL G IF HF s
32
4242 (DIN)
5252 (DIN)
6262 (DIN)
8282 (DIN)82 IL
102
9.525
12.712.7
15.87515.875
19.0519.05
25.425.425.4
31.75
5.72
7.757.75
9.659.65
11.6811.68
17.0217.0217.02
19.56
8.53
11.311.3
13.2813.28
15.6215.62
25.425.425.4
29
6.35
8.518.51
10.1610.16
12.0712.07
15.8815.8815.88
19.05
8.2
11.811.7
14.714.7
16.116.1
212121
26.4
9,000
18,00018,000
22,40022,400
29,00029,000
60,00060,00060,000
95,000
18.2
23.2223.22
29.3129.31
32.9932.99
45.945.945.9
58.04
3.5
4.34.5
5.35.5
5.66.6
86.88
9
9.525
12.712.7
15.87515.875
19.0519.05
25.425.425.4
31.75
9.2
14.112.7
15.915.9
17.519.05
26.525.426.6
31.75
12.6
18.3418.34
24.723.1
31.2828.43
36.6436.6436.64
42
1.25
1.581.58
1.581.58
1.811.81
3.053.053.05
3.53
1-005 - 090512Group: 005
American Metric® CorporationAmetric®
19
Metric Chain Attachments
Note: The above attachments are produced as connector links for self assembly. Chain with riveted attachments can be produced assem-bled-to-order in our South Carolina facility.DIN = German Standard Series Attachment
A2 & K2 Connector Links and Inner Links
ChainNo.
32
4242 (DIN)
5252 (DIN)
6262 (DIN)
8282 (DIN)82 IL
102
122
142
162
pPitch
9.525
12.7
15.875
19.05
25.4
31.75
38.1
44.45
50.8
b1min.
5.72
7.75
9.65
11.68
17.02
19.56
25.4
30.99
30.99
b2max.
8.53
11.3
13.28
15.62
25.4
29
37.9
46.5
45.5
d1max.
6.35
8.51
10.16
12.07
15.88
19.05
25.4
27.94
29.21
gmax.
8.2
11.8
14.7
16.1
21
26.4
33.4
37
42.2
FBmin.
9,000
18,000
22,400
29,000
60,000
95,000
160,000
200,000
250,000
m DL
17.6
23.2223.22
29.31
32.9932.99
45.945.945.9
58.04
71.3
81.1
92.8
3.5
4.34.5
5.35.5
5.66.6
86.88
9
10.5
13.1
13.1
G
9.525
12.712.7
15.87515.875
19.0519.05
25.425.425.4
31.75
38.1
44.45
50.8
I
9.5
14.112.7
15.915.9
17.519.05
26.625.426.6
31.75
38.1
44.45
50.8
F
13.5
18.618.2
23.822.32
30.526.20
3839.138
42.85
54.2
61.5
71.4
H
6.5
8.48.89
10.410.3
1213.4
13.715.913.7
19.8
26.67
28.58
31.75
s
1
1.581.58
1.581.58
1.811.81
3.053.053.05
3.53
4.8
6
6
A2
K2
1-005 - 090512 Group: 005
American Metric® CorporationAmetric®
20
729.1735.1738.1
738.2*741.1741.2
741.3741.4741.5*
741.6758.1766.1
ChainNo.
* = Straight Side Plates
Attachment Link Types
A4 = Bent attachment, one side, on inner plate.
B4 = Bent attachment, two sides, on inner plate.
D4 = Straight attachment, one side, on inner plate.
E4 = Straight attachment, two sides, on inner plate
A7 = Bent attachment, one side, on outside plate.
B7 = Bent attachment, two sides, on outside plate.
D7 = Straight attachment, one side, on outside plate.
E7 = Straight attachment, two sides, on outside plate
DINNo.S 32S 42S 52
S 45
S 55
S 62S 77S 88
Pitchp
29.2134.9338.1
38.441.441.4
41.441.441.5
41.9158.3466.27
h1max61.074.977.5
82.074.976.5
74.997.586.5
97.8106.0121.3
h2
43.054.059.2
57.554.054.5
54.069.559.1
69.882.096.8
h3
16.623.622.1
19.8
19.8
24.636.343.7
h4max25.434.331.8
30.2
30.2
38.650.055.6
h5max24.431.835.1
35.1
35.1
38.140.146.0
b2max20.1925.4
28.58
24.3528.5828.58
28.5831.1726.9
31.831.1737.52
imax8.7
14.011.4
15.411.412.5
11.414.515.8
11.420.820.8
m
6.58.36.6
9.09.98.5
9.98.38.3
6.68.38.3
n
8.011.58.1
9.011.48.5
11.414.711.0
1312.511.0
Agricultural Roller Chain
Note: The above attachments are produced as connector links for self assembly. Chain with riveted attachments can be produced assem-bled-to-order in our South Carolina facility.
Group: 005
Ask for Our Agricultural Roller Chain Catalog To See Special Chains and attachments For This Industry
1-005 -090512
American Metric® CorporationAmetric®
21
ChainSize
3/8 x 3/161/2 x 5/165/8 x 3/83/4 x 1/2
1 x 5/81-1/4 x 3/41-1/2 x 1
6 x 2.88 x 1/83/8 x 7/321/2 x 5/165/8 x 3/8
3/4 x 7/161 x 1730 x 171-1/4 x 3/4
35 x 3/41-1/2 x 11-3/4 x 1-1/42 x 1-1/4
ChainNo.
06C08A10A12A
16A20A24A
04B05B06B08B10B
12B16B
–20B
–24B28B32B
ISONo.
4.777.859.4
12.57
15.7518.925.22
2.83.05.727.759.65
11.6817.0217.0219.56
19.625.430.9930.99
7.4711.1513.817.7
22.527.435.3
4.14.778.5311.3
13.28
15.6225.425.429.0
27.037.946.545.5
5.087.95
10.1611.91
15.8819.0522.23
4.05.0
6.358.51
10.16
12.0715.8815.8819.05
19.0525.4
27.9429.21
3.593.965.085.94
7.929.5311.1
1.852.313.284.455.08
5.728.288.28
10.19
10.1914.6315.9
17.81
11.014.819.424.2
30.138.248.2
6.66.311.015.318.2
21.033.633.638.6
41.850.562
60.8
21.529.937.547
60.674.194
–12.221.629.534.8
40.565.465.475.3
78.598.7122
119.6
Break-ing
Strength
11.115.3519.424.2
31.338.248.2
–6.3511.1515.318.0
20.933.733.738.7
41.850.562.361.1
L3max.
L2max.
L1max.
I3max.
I2max.
I1max.
Extended Pin DimensionsPlateHeightg max.
C. L.Extension
k max.
PinDiameter
d2 h9
13.217.820.525.4
33.540.450.3
7.48.6
13.517
19.6
22.736.036.041.5
38.353.063.663.6
22.030.138.748.3
61.576.396.1
12.714.323.130.736.2
41.867.567.578.0
78.0101.3122.9121.7
32.545.256.871.1
92112.2141.9
–19.933.744.952.8
61.399.399.3114.7
114.7149.5182.9180.5
3.33.94.14.6
5.46.16.6
2.93.13.33.94.1
4.65.45.46.1
6.16.67.47.9
9.1121518
24.130.136.2
5.07.18.211.814.7
16.12121
26.4
26.033.437
42.2
7,90014,10022,20031,800
56,70088,500
127,000
3,0005,0009,000
18,00022,400
29,00060,00060,00095,000
85,000160,000200,000250,000
9.52512.7
15.87519.05
25.431.7538.1
68
9.52512.7
15.875
19.0525.430
31.75
3538.144.4550.8
RollerDiameterd1 max.
OverallWidth
b2 max.
InnerWidth
b1 min.Pitch
p
Extended Pin Description EPT = Triple span two sides (Overall width = I3) EPD = Double span one side (Overall width = I2) EPX = Triple span one side (Overall width = I3)
35405060
80100120
1222324252
6282
630.1102
635.1122142162
Assembled Extended Pin Roller Chain
1-705 -090512 Group: 705
Note: PART NUMBERS FOR ASSEMBLED EXTENDED PIN ROLLER CHAIN DIFFERENT TNAN EXTENDED PIN ATTACHMENTS (SEE METRIC CHAIN ATTACHMENTS PAGE)
Ask for Our Agricultural Roller Chain Catalog To See Special Chains and attachments For This Industry
American Metric® CorporationAmetric®
22
Assembly Combinations
Single Chain with double span extended pins on one side
Single Chain with triple span ex-tended pins on one side
Single Chain with double span ex-tended pins on both sides
Double Chain with triple span ex-tended pins on one side
Double Chain with triple span extended pins on both sides
ChainSize
6 x 2.88 x 1/83/8 x 7/323/8 x 7/32
1/2 x 5/161/2 x 5/165/8 x 3/85/8 x 3/8
3/4 x 7/163/4 x 7/161 x 171 x 17
1-1/4 x 3/41-1/4 x 3/41-1/2 x 11-1/2 x 1
ChainNo.
04B05B06B
06B-2
08B08B-210B
10B-2
12B12B-216B
16B-2
20B20B-224B
24B-2
ISONo.
2.83
5.725.72
7.757.759.659.65
11.6811.6817.0217.02
19.5619.5625.425.4
45
6.356.35
8.518.5110.1610.16
12.0712.0715.8815.88
19.0519.0525.425.4
1.852.313.283.28
4.454.455.085.08
5.725.728.288.28
10.1910.1914.6314.63
–––
34
–44.9
–52.8
–61.7
–99.9
–116–
150
BreakingStrength
N
3,0005,0009,00016,000
18,00032,00022,40040,000
29,00053,00060,000106,000
95,000170,000160,000280,000
I3max.
M2max.
I2max.e1
C. L.Exten-
sion
PinDiameter
d2 h9
11.219.5
––
25.6–
30–
34.8–
56.8–
65.5–
85.5–
2.93.13.33.3
3.93.94.14.1
4.64.65.45.4
6.16.16.66.6
13.314.323.8
–
31–
36.2–
42.2–
68–
79–
101–
5.55.64
10.2410.24
13.9213.9216.5916.59
19.4619.4631.8831.88
36.4536.4548.3648.36
3.84
7.247.24
10.110.111.6211.62
13.6313.6322.322.3
25.4825.4833.6633.66
4.14.88.58.5
11.311.313.313.3
15.615.625.425.4
29.029.037.937.9
68
9.5259.525
12.712.7
15.87515.875
19.0519.0525.425.4
31.7531.7538.138.1
RollerDiameterd1 max.
InnerWidth
b1 min.Pitch
p
122232
2032
42204252
2052
62206282
2082
10221021222122
M1max.
Attachment Width
e
TransversePitch
Assembled Extended Pin Roller Chain
Group: 705 1-705 - 090512
American Metric® CorporationAmetric®
23 1-805 - 090512
Part Numbering System for Assembled Extended Pin Roller Chain
Attachment every pitch
Attachment every 2nd outer link pitch
Attachment every 3rd pitch
Attachment every 4th outer link pitch
Attachment every 5th pitch
Attachment every 6th outer link pitch
Attachment every 7th pitch
Attachment every 8th outer link pitch
Attachment every 9th pitch
Attachment every 10th outer link pitch
Description
Code Number(pitches)
T1
T2-EL
T3
T4-EL
T5
T6-EL
T7
T8-EL
T9
T10-EL
Single Span One Side
EP1
Triple Span Two Sides
EPT
Double Span One Side
EPD
Triple Span One Side
EPX
T1-EPT
T2-EL-EPT
T3-EPT
T4-EL-EPT
T5-EPT
T6-EL-EPT
T7-EPT
T8-EL-EPT
T9-EPT
T10-EL-EPT
T1-EPD
T2-EL-EPD
T3-EPD
T4-EL-EPD
T5-EPD
T6-EL-EPD
T7-EPD
T8-EL-EPD
T9-EPD
T10-EL-EPD
T1-EPT
T2-EL-EPT
T3-EPT
T4-EL-EPT
T5-EPT
T6-EL-EPT
T7-EPT
T8-EL-EPT
T9-EPT
T10-EL-EPT
T1-EPX
T2-EL-EPX
T3-EPX
T4-EL-EPX
T5-EPX
T6-EL-EPX
T7-EPX
T8-EL-EPX
T9-EPX
T10-EL-EPX
Part Numbering System for Roller Chain with Attachments
Attachment every pitch
Attachment every 2nd outer link pitchAttachment every 2nd inner link pitch
Attachment every 3rd pitch
Attachment every 4th outer link pitchAttachment every 4th inner link pitch
Attachment every 5th pitch
Attachment every 6th outer link pitchAttachment every 6th inner link pitch
Attachment every 7th pitch
Attachment every 8th outer link pitchAttachment every 8th inner link pitch
Attachment every 9th pitch
Attachment every 10th outer link pitchAttachment every 10th inner link pitch
Description
Code Number(pitches)
T1
T2-ELT2-IL
T3
T4-ELT4-IL
T5
T6-ELT6-IL
T7
T8-ELT8-IL
T9
T10-ELT10-IL
A1 K1 R SA1 SK1 A2 K2 SA2 SK2
T1-A1
T2-EL-A1T2-IL-A1
T3-A1
T4-EL-A1T4-IL-A1
T5-A1
T6-EL-A1T6-IL-A1
T7-A1
T8-EL-A1T8-IL-A1
T9-A1
T10-EL-A1T10-IL-A1
T1-K1
T2-EL-K1T2-IL-K1
T3-K1
T4-EL-K1T4-IL-K1
T5-K1
T6-EL-K1T6-IL-K1
T7-K1
T8-EL-K1T8-IL-K1
T9-K1
T10-EL-K1T10-IL-K1
T1-R
T2-EL-RT2-IL-R
T3-R
T4-EL-RT4-IL-R
T5-R
T6-EL-RT6-IL-R
T7-R
T8-EL-RT8-IL-R
T9-R
T10-EL-RT10-IL-R
T1-SA1
T2-EL-SA1T2-IL-SA1
T3-SA1
T4-EL-SA1T4-IL-SA1
T5-SA1
T6-EL-SA1T6-IL-SA1
T7-SA1
T8-EL-SA1T8-IL-SA1
T9-SA1
T10-EL-SA1T10-IL-SA1
T1-SK1
T2-EL-SK1T2-IL-SK1
T3-SK1
T4-EL-SK1T4-IL-SK1
T5-SK1
T6-EL-SK1T6-IL-SK1
T7-SK1
T8-EL-SK1T8-IL-SK1
T9-SK1
T10-EL-SK1T10-IL-SK1
T2-EL-A2
T4-EL-A2
T6-EL-A2
T8-EL-A2
T10-EL-A2
T2-EL-K2
T4-EL-K2
T6-EL-K2
T8-EL-K2
T10-EL-K2
T2-EL-SA2
T4-EL-SA2
T6-EL-SA2
T8-EL-SA2
T10-EL-SA2
T2-EL-SK2
T4-EL-SK2
T6-EL-SK2
T8-EL-SK2
T10-EL-SK2
Assembled Roller ChainWith Attachments or Extended Pins
Group: 705
American Metric® CorporationAmetric®
24 GROUP: 605
Special Roller ChainAssembled To Order
To insure customers receive what they need, when they need it, procedures for ordering chains assembled-to-order are established as follows:
1) Quantity of lengths (pieces) of chain required.
2) Ametric® Chain number ANSI Chain Number or ISO Chain Number.
3) Length of chain in feet / meters, or number of links.
4) Open ended chain (for C.L., O.L. or H.L connection) or endless (riveted connection).
5) Attachment links, if required.
5a) Type of attachments.
Double hole / pitch attachments A2, K2, SA2, SK2 and EP2 (not shown) also available.
If this information is not available, the following information is required.
PitchInner width b1Width of inner link b2Roller or bush diameterTransverse pitch e (only for multi-strand chain)Strands (single, double, triple or quadruple)
K
SAR
SK
A1
EP or D1
1-605 - 090512
American Metric® CorporationAmetric®
25 GROUP: 805
Special Roller ChainAssembled To Order
5b) Spacing "T" for attachments.
Spacing based on pitches, such as "T4", every fourth pitch. Specify "EL" external attachment links (shown) or "IL" internal attachment links.
Spacing based on pitches such as "T3", every third pitch. In the case of an odd number of pitches, a combination of "EL" and "IL" links should be used. If both "EL" and "IL" links are not available, an "OL" offset link or "HL" half link is required. This can reduce the original strength by 80%, however.
Note: The nylon (Polyamide 6.6) bushings/ bearings line the inside wall of the rollers for exceptional lubrication free performance.
Double and triple strand chain also available.
Roller Chain With Nylon Bushings/Bearings
ChainNo.
CZ3CY3
CZ4CY4
CZ5CY5
CZ6CY6
P
19.05
25.40
31.75
38.10
R1R
WW1
D L1L2
P P
H
11.90
15.88
19.05
22.23
18.3
24.6
30.0
36.0
7.0
9.0
11.4
15.0
15.75
22.30
28.00
31.50
1.2
1.5
2.0
3.2
8.8
11.7
14.6
17.5
3.28
3.97
5.08
5.95
11.2
15.0
19.2
23.5
12.95
17.45
21.20
26.20
R R1 W1 W t H D L1 L2
t
Roller Specifications RollerType Main Roller Color Aux. Roller Color
General Type
Conduction Type
General Type
Conduction Type
DP
DPC
DN
DNC
Gray
Black
Gray
Black
Black
Black
Gray
Gray
Metric Triple Speed Chain
Group: 005
American Metric® CorporationAmetric®
40 1-005 - 060203
European and American StandardAccumulator Chain
Other designs, pin lengths, roller diameters upon request.
ChainNo.
Design Pitchp
InnerWidth
b1min.
Width ofInner Link
b2max.
WidthBetween/Over
Outer Plates Widthof Rollers
b5
RollerDiameter
d1
PinDiameter
d2h9
Dimensionover Pin
lmax.
b3min.
b4min.
T 455 SF 40 SFK
513 SF 513 SFK
T 513 SFT 513 SFK
548 SF 548 SFK
T 548 SFT 548 SFK
713 SF 713 SFK
722 SF 722 SFK
728 SF 728 SFK
T3
1
T
1
T
2
2
2
9.52512.7
19.05
19.05
25.4
25.4
25.4
38.1
50.8
5.727.85
11.68
11.68
17.02
17.02
7.75
11.68
17.02
8.5311.15
15.62
15.62
25.45
25.45
11
15.62
25.45
29.1411.28
15.8
15.8
25.81
25.81
11.1
15.8
25.8
–14.48
19.55
–
32
–
14.4
19.55
32
–9
11.5
–
12.5
–
8.3
11.5
12.5
6.357.85
12.07
12.07
15.88
15.88
12
12.07
15.88
3.283.96
5.72
5.72
8.28
8.28
4.45
5.72
8.28
3433
48
61.7
65
99.9
35
48
65
Accumulator Chains Series SF Stainless Steel513 RF SF513 RF SFK
548 RF SF548 RF SFK
722 RF SF722 RF SFK
728 RF SF728 RF SFK
1
1
2
2
19.05
25.4
38.1
50.8
11.68
17.02
11.68
17.02
15.62
25.45
15.62
25.45
15.8
25.81
15.8
25.81
19.55
32
19.55
32
11.5
12.5
11.5
12.5
12.07
15.88
12.07
15.88
5.72
8.28
5.72
8.28
48
65
48
65
Connecting links with Seeger circlip ring. Our connecting links principally have the same Length I as the standard pins.SF = Accumulator rollers made of Steel, SFK = Accumulator Roller made of Plastic
Accumulator chain sprockets available. Please contact our Special Products Dept. for information.
ANSI
Group: 005
American Metric® CorporationAmetric®
41 1-005 - 060203
European and American StandardAccumulator Chain
CenterDistance
e Steel PlasticVariant I
d
TemperatureRange
oC
BreakingLoad
FBN
Weightkg/m
Variant IId
Load perConveyor
Roller with 10 m of
ConveyingLength kg
Material Diameter
10.24
31.5
38.92
44.9
63.76
22.7
31.5
44.9
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
9.216.75
24
24
38.5
38.5
18
24
50
26
26
26
28
28
28
2upon request
1510
3010
3025
7525
4.54.5
1510
3025
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
16,00014,100
32,000
90,000
70,000
160,000
18,000
32,000
70,000
1.18
3.12.3
4.53.1
7.24.9
9.37.3
2.11.3
2.21.3
7.63.6
Coefficient of Friction: Steel on Steel, Oiled 0.15 Maximum Conveying Length 25 - 30 MetersCoefficient of Friction: Steel on Plastics < 0.1 Upon Request Guide Plates Can be Installed for Long Conveying Lengths
ConveyorRollers
d
31.5
44.9
31.5
44.9
X
X
X
X
X
X
X
X
24
38.5
24
38.5
7.5
15
7.5
15
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
- 30 to + 200- 10 to + 60
18,500
40,000
18,500
40,000
3.12.3
7.24.9
2.21.3
7.63.6
Group: 005
American Metric® CorporationAmetric®
42 1-005 - 80417
Metric Leaf Chain
ChainNo.
LF 122LF 124LF 126
LF 152LF 154LF 156
LF 192LF 194LF 196
LF 252LF 254LF 256
LF 312LF 314LF 316
LF 382LF 384LF 386
LF 442LF 444LF 446
LF 502LF 504LF 506LF 508
2 x 24 x 46 x 6
2 x 2 4 x 4 6 x 6
2 x 24 x 4 6 x 6
2 x 2 4 x 4 6 x 6
2 x 2 4 x 4 6 x 6
2 x 2 4 x 46 x 6
2 x 2 4 x 46 x 6
2 x 24 x 4 6 x 68 x 8
PitchP
12.7
15.875
19.05
25.4
31.75
38.1
44.45
50.80
Lacing
OverallWidth
W
9.015.221.4
1017.124.1
10.718.125.4
17.229.341.3
20.336.551.5
26.546.567.5
30.554.580.5
30.554.580.5105.5
PinDiameter
D1
4.45
5.08
5.72
8.28
10.19
14.63
15.87
17.83
ChainHeight
H1
10.7
12.6
14.7
21.4
24.5
33.4
40
43
PlateThickness
T
1.55
1.72
1.83
3
3.75
5
6
6
LinkHeight
H2
20
20
20
35
35
50
60
60.
LinkLength
L
30
30
30
45
45
60
70
70
LinkHole
D2
10
10
10
16
16
26
36
36
BreakLoad
N
18,00036,00054,000
26,00050,00078,000
33,00066,00099,000
70,000140,000210,000
105,000210,000315,000
175,000350,000475,000
210,000410,000605,000
265,000530,000800,000
1,050,000
Weightkg/m
0.390.741.1
0.50.961.39
0.591.151.7
1.563.044.53
2.013.935.86
4.188.4812.2
6.2512.218.2
6.7313.119.525.8
SHOWN WITH TER-MINAL LINK
SHOWN WITHOUTTERMINAL LINK
European Standard Leaf Chain
Intl. Ref. No.
LL 08 22LL 08 44LL 08 66
LL 10 22LL 10 44LL 10 66
LL 12 22LL 12 44LL 12 66
LL 16 22LL 16 44LL 16 66
LL 20 22LL 20 44LL 20 66
LL 24 22LL 24 44LL 24 66
LL 28 22LL 28 44LL 28 66
LL 32 22LL 32 44LL 32 66LL 32 88
Group: 005
American Metric® CorporationAmetric®
43 1-005 - 80417
Metric Leaf Chain
ChainNo.
FB 124FB 126
FB 154FB 156FB 158
FB 194FB 196
FB 194 SFB 196 S
FB 254FB 256FB 258
4 x 46 x 6
4 x 4 6 x 68 x 8
4 x 4 6 x 6
4 x 4 6 x 6
4 x 4 6 x 68 x 8
PitchP
12.7
15.875
19.05
19.05
25.4
Lacing
OverallWidth
W
15.221.4
17.124.130.9
18.125.4
22.231.7
29.341.352.1
PinDiameter
D1
4.45
5.08
5.72
6.5
8.28
ChainHeight
H1
11.7
14.4
16.1
18.1
23
PlateThickness
T
1.55
1.72
1.83
2.35
3
BreakLoad
N
36,00054,000
52,00078,000
102,000
64,00095,000
85,000130,000
140,000210,000280,000
Weightkg/m
0.931.4
1.21.82.3
1.42.3
22.9
3.55
6.8
Leaf Chain with Case-Hardened BushingsPlateWidth
B
12.819
14.521.528
15.222.6
19.228.8
25.637.549
W W W
T
D1
H1
D1D1
T T
BBB
FH 384FH 386FH 388
FH 504FH 506FH 508
FH 634FH 636FH 638
4 x 4 6 x 68 x 8
4 x 4 6 x 68 x 8
4 x 4 6 x 68 x 8
38.1
50.8
63.5
53.275.294.2
60.287.2111.2
81.2112.2142.2
14.63
17.81
22.89
33
43
52
5
6
8
354,000540,000700,000
530,000800,000
1,050,000
845,0001,270,0001,690,000
9.112.516.5
13.520
26.5
19.429.138.8
Leaf Chain in Special Heavy Duty Construction426283
2 x 22 x 33 x 44 x 44 x 66 x 68 x 82 x 22 x 33 x 44 x 44 x 66 x 68 x 82 x 22 x 33 x 44 x 44 x 66 x 68 x 82 x 22 x 33 x 44 x 44 x 66 x 68 x 82 x 22 x 33 x 44 x 44 x 66 x 68 x 8
CAM Chains are designed for excellent wear resistance and smooth transmission with minimal noise even under high RPM. ALSO USED FOR INDUSTRIAL APPLICATIONS
Drive Chains are precision engineered to offer excellent performance in terms of low wear and long life. ALSO USED FOR INDUSTRIAL APPLICATIONS
1-005-040205
1-005-040205
Group: 005
American Metric® CorporationAmetric®
50
Metric High Performance ChainBest Value Chain we offer
(Replaces Standard Chain for only A Slight Increase in cost But significant improvements in strength and ware)
Average Breaking Load - 12B-1
High Comp A Comp B Comp C
Wear Life 08B-1
High Performance
Comp A
These High Performance chains have been specially developed for client applications that require exceptional strength and endurance. Inspiration in the detail of the plates, pins, bush-es, and rollers, manufacture to close tolerance and assembly with care. This is what makes these chains tougher than the rest.
ISO Number
08B-1
10B-1
12B-1
16B-1
20B-1
Ametric®Part
Number Pitch
Width be-tween Inner
Plates
(Min.)Roller Dia.
(Max.)
Plate Height
(Max.)
WidthOver Bear-
ing Pin
(Max.)
BearingPin Dia.
(Max.)
Tensile Strength
(KN)
(Min.)
Tensile Strength
(KN)
(Avg.)
Allowable Load(KN)
(Max.)
42 HP
52 HP
62 HP
82 HP
102 HP
12.70
15.875
19.05
25.40
31.75
7.75
9.65
11.68
17.02
19.56
8.51
10.16
12.07
15.88
19.05
11.81
14.73
16.13
21.08
26.42
17.00
21.80
22.70
36.10
43.20
4.45
5.08
5.72
8.27
10.19
20.79
27.65
33.34
73.55
110.82
22.66
29.87
36.69
78.48
116.74
4.5
5.6
7.25
15
23.75
Models also available in double and triple strandsAlso available in ANSI Chain
1-005-060306Group: 005
American Metric® CorporationAmetric®
51
Metric Self Lubricating Chain
Self Lubricating chain features unique powder alloy steel bushes that are impregnated with a special oil. This delivers a maintenance-free wear life up to two times in excess of standard chains. Used for clean enviroment applications where greasing is often not possible: like food processing, printing, pharmaceuticals and electronics.
A special Zinc Aluminum Coating gives this chain outstanding resistance, with the same strength and breaking load of standard chains, to perform in the harshest enviroments. This Corrosion Resistant chain has been proven against Nickel, Zinc and other plated chains.
Nickel
ZincBlue
Zinc Yellow
Stainless Steel
Zinc Aluminum Coating
Nickel
ZincBlue
Zinc Yellow
Stainless Steel
Zinc Aluminum Coating
Testing done as per ASTM B117
1-005-030606Group: 005
Available in RoHS COMPLIANT Finishes, Please Specify.
American Metric® CorporationAmetric®
53 1-020 - 70115
European Type Silent Chain
Center Guide Side Guide (A)
ChainNo.
Pitchp
Chain Widthba
Center Guide
Width BetweenGuides (ba)Side Guide
Approximate Breaking Strength
KPWeightkg/m
KX 015AKX 020AKX 025KX 030KX 030AKX 035
KX 315AKX 320AKX 325KX 330KX 335KX 350KX 365
KX 425KX 435KX 440KX 450KX 465
KX 535KX 540KX 550KX 565KX 575
KX 650KX 650AKX 665KX 675KX 6100KX 6125KX 6180
KX 865KX 875KX 8100KX 8100AKX 8125KX 8150
9.5259.5259.5259.5259.5259.525
12.712.712.712.712.712.712.7
15.87515.87515.87515.87515.875
19.0519.0519.0519.0519.05
25.425.425.425.425.425.425.4
38.138.138.138.138.138.1
19.0525.425.4
31.7531.7538.1
19.0525.425.4
31.7538.150.863.5
25.431.7544.4550.863.5
31.7544.4550.863.572.2
50.850.863.576.2
101.6127.0180.0
63.576.288.988.9
127.0152.4
12.719.05
23.8
12.719.05
34.9
85.7
1,5002,3003,1003,9003,9004,700
2,1003,1004,1505,2006,2008,300
10,400
5,5007,3009,20011,00014,600
8,80011,00013,20017,60019,800
16,80021,00021,00025,20033,60042,00048,000
31,50037,80050,40050,40063,00075,600
0.640.860.961.161.161.39
0.831.121.391.541.842.423.02
1.682.312.753.354.30
2.663.222.955.156.20
5.605.606.808.2010.7012.7013.50
10.3011.6016.2016.2020.1023.60
There are slight dimensional differences between manufactures of silent chain. For maximum life our silent chain sprockets should be used with our silent chain. To assure proper purchase, send sample for identification.
NOTE: ORIGINAL, WABCO-WESTINGHOUSE, GERMAN BRAND CHAIN AND SPROCKETS AVAILABLE BY SPECIAL QUOTE. DELIVERY USUALLY 6 TO 8 WEEKS.
Group: 020
American Metric® CorporationAmetric®
54 GROUP: 520 1-520 -90719
German Type Silent Chain
ChainNo.
Pitchp *RZ
NominalWidth
bn
WorkingWidth
ba
OverallWidth
bg
BreakingLoadFa[N]
Weightkg/m
SprocketWidth
b (mm) H o s t
KH 2212 AKH 2215 AKH 2220 AKH 2225
KH 015 AKH 020 AKH 025KH 030KH 035
KH 315 AKH 320 AKH 325KH 330KH 335KH 350
KH 425KH 435KH 450KH 465
KH 535KH 550KH 565KH 575
KH 650KH 665KH 675KH 6100
KH 865KH 875KH 8100KH 8150
KH 9100KH 9115KH 9150KH 9180
5/16”7.9375 mm
3/8”9.525 mm
1/2”12.7 mm
5/8”15.875 mm
3/4”19.05 mm
1”25.4 mm
1-1/2”38.1 mm
2”50.8 mm
12141825
1014172125
101417212533
13172533
17253337
17212533
21253349
25293745
12152025
1520253035
152025303550
25355065
35506575
506575100
6575100150
100115150180
11131727
12.518.826.53339
12.519
26.53339
51.5
2735.55269
35.552
68.577
5365
77.5103
65.578103153
104120153186
17192331
2026313744
2227.533394558
3341.558
74.5
43597684
6173
85.5111
77.590115165
117133166199
5,8006,9009,000
13,200
14,50021,00027,40034,00040,000
18,50026,50034,60043,00051,00067,500
46,00061,00089,000117,500
73,500108,000142,000160,000
127,000157,000187,000245,000
257,000306,000403,000600,000
490,000570,000725,000880,000
0.500.570.740.95
0.640.860.941.161.39
0.831.121.391.541.842.42
1.682.313.354.30
2.663.955.156.20
5.606.808.20
10.70
10.3011.6016.2023.60
22.4025.6032.6038.20
1012
16.530
1218303540
121830354055
30405570
40557080
557080
105
7585110160
110125160190
7.7
9.2
12.3
15.4
18.4
25
37
49.2
4.2
5.2
6.7
8.4
10
13.1
20.1
26.8
1
1.5
1.5
2
2
3
3
4
2
2
2.5
3
3.5
4
6
7
Dimensions in mm – *RZ = Number of rows = total number of plates per cradle joint. – Other pitches and chain widths available upon request. – Sprockets available upon request.
Internal Guide External Guide
Designation of an inverted tooth chain type 300, 1/2" pitch
Norminal Width 30 mmInternal Guide: KH 300
Norminal Width 20 mmExternal Guide: KH 320 A
American Metric® CorporationAmetric®
55 GROUP: 5201-520 - 060223
Biflex Toothed Chain
ChainNo.
Pitchp *RZ
NominalWidth
bn
WorkingWidth
ba
OverallWidth
bg
BreakingLoadFa[N]
Weightkg/m
SprocketWidth
b (mm) H s t
BIZ 015ABIZ 020ABIZ 025BIZ 030BIZ 040BIZ 050BIZ 065
BIZ 530ABIZ 535BIZ 550BIZ 565BIZ 590BIZ 5125BIZ 5135
3/8”9.525 mm
1/2”12.7 mm
3/4”19.05 mm
10141721253341
10131721253341495365
15172533456165
15202530405065
152025304050657580100
3035506590125135
12.518.826.53339
51.564
12.517.226.53339
51.5647783
102
2735.552
68.593.5127135
20263137445669
222633394558708389
108
39435976
101134143
17,40025,20032,90041,00048,00064,00079,000
28,30034,50053,00066,00078,000
104,000129,000154,000166,000204,000
72,00095,000
139,000184,000251,000340,000362,000
0.91.21.51.82.12.83.4
1.31.62
2.42.83.74.65.45.87.2
3.53.95.67.39.8
13.214.1
1218.33035455570
1216.530354555708085
105
2540557095
130140
14
18
27
1.5
1.5
2
2
2.5
3.5
Dimensions in mm – *RZ = in-series number = total number of plates per joint. – Other pitches and chain widths available upon request. – Sprockets available upon request.
Biflex toothed chains are available with the following pitches: 3/8”, 1/2”, 3/4”.
If not otherwise specified, the chains are delivered open with a split pin fastener included.
For circulating chains even numbers of pitches must be used. Chains with odd numbers of pitches cannot be connected together and are only permitted in cases where the chain ends are connected to parts of the machine.
Internal Guide External Guide
Designation of a 1/2” Biflex toothed chainNominal Width 30 mmInternal Guide: BIZ 330
Dimensions in mm – *RZ = total number of plates per rolling pivot joint. – Other chain widths available upon request. – Sprockets available upon request.
They are delivered open and with a split pin connector included, if not otherwise specified.
For continuous chains even numbers of pitches must be used, because ends of chains with an odd number of pitches cannot be joined.
Odd numbers are permitted only if the ends of the chain are to be connected to mechanical components.
Internal Guide External Guide
Designation of an HDL-tooth chain, 1/2” pitchNominal Width 65 mmInternal Guide: HDL 365
Nominal Width 20 mmExternal Guide: HDL 320A
o
6.7
8.7
10.7
14
Group: 520
American Metric® CorporationAmetric®
57
P1 W1
H1
ChainNo.
STANDARD "V" SERIES PIV CHAIN LONG LIFE "L" SERIES PIV CHAIN
W2
H2
P2
"V" SERIES PIV CHAIN "L "SERIES PIV CHAIN
W1Weight
kg
0.600.630.650.680.730.750.88
1.151.311.361.521.571.621.681.73
2.272.352.442.792.882.963.05
Numberof Links
29303133363743
27313236
384041
29303236373840
H2
9.59.59.59.59.59.59.5
12.812.812.812.812.812.812.812.8
18.818.818.818.818.818.818.8
W2
25.625.625.625.625.625.625.6
37.637.637.637.637.637.637.637.6
44.644.644.644.644.644.644.6
15.315.315.315.315.315.315.3
20.120.120.120.120.120.120.120.1
25.525.525.525.525.525.525.5
L 029L 030L 031L 033L 036L 037L 043
L 227L 231L 232L 236
L 238L 240L 241
L 329L 330L 332L 336L 337L 338L 340
P2Chain
No.Numberof Links
24252627293035
2225262930313233
26272832333435
2528333435
38394041
36373839
H1
9.59.59.59.59.59.59.5
13.413.413.413.413.413.413.413.4
16161616161616
20.620.620.620.620.6
20.620.620.620.6
23.423.423.423.4
24.624.624.624.624.624.624.6
37.637.637.637.637.637.637.637.6
44.644.644.644.644.644.644.6
5959595959
70.670.670.670.6
77777777
P1
18.718.718.718.718.718.718.7
24.9524.9524.9524.9524.9524.9524.9524.95
28.628.628.628.628.628.628.6
35.8535.8535.8535.8535.85
35.8535.8535.8535.85
46.546.546.546.5
V 024V 025V 026V 027V 029V 030V 035
VZ 222VZ 225VZ 226VZ 229VZ 230VZ 231VZ 232VZ 233
VZ 326VZ 327VZ 328VZ 332VZ 333VZ 334VZ 335
VZ 425VZ 428VZ 433VZ 434VZ 435
VZ 538VZ 539VZ 540VZ 541
VZ 636VZ 637VZ 638VZ 639
PIV® is the registered trademark of Link Belt
Note: The new Long Life "L" series is more flexible and durable, plus completely interchanges with the old "V" series.A better value for the same money.
Complete units may be special ordered.We will begin a stocking program for these units in the near future.
European PIV® Type Chain
1-004 - 71107 Group: 004
American Metric® CorporationAmetric®
58
Metric Chain Connecting LinkAssortment Kit
CL AK11
PIECES SIZES
202020202020201010106
0212223242434648526282
1-005 - 060306Group: 005
American Metric® CorporationAmetric®
59
American Standard (ANSI) Roller Chain(All dimensions in inches)
Single Roller Chain
Double Roller Chain
ANSIChain
No.
AverageStrength(lbs)ANSI Stan-
dard
4551,0452,455
2,8643,977
5459,43215,773
24,81835,52248,181
63,38677,68198,090141,476
Weightlbs/ft
0.0540.1010.221
0.2750.416
0.6841.0061.743
2.6223.7695.029
6.7739.019
10.83015.557
C.L.Width
Extensionk
0.0310.0200.030
0.0490.047
0.0590.0710.091
0.1690.1570.181
0.4890.2280.2760.295
152535
4140
506080
100120140
160180200240
Ametric®Chain
No.
15-125-135-1
41-140-1
50-160-180-1
100-1120-1140-1
160-1180-1200-1240-1
ISONo.
03 C-104 C-106 C-1
085-108 A-1
10 A-112 A-116 A-1
20 A-124 A-128 A-1
32 A-136 A-140 A-148 A-1
Pitchp
3/161/43/8
1/21/2
5/83/41
1 1/41 1/21 3/4
22 1/42 1/2
3
BetweenInnerPlates
b1
0.0940.1250.188
0.2460.309
0.3700.4950.620
0.7440.9930.993
1.2421.3971.4901.864
RollerDiameter
d1
0.0980.1300.200
0.3060.313
0.4000.4690.625
0.7500.8751.000
1.1241.4061.5621.875
ChainWidth
l
0.2400.3110.488
0.5410.654
0.8151.0201.287
1.5911.9802.142
2.5512.8663.1573.760
Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.
0.0200.031
0.1300.047
.0.0940.0670.063
0.1610.1540.181
0.1890.2280.2720.291
25-235-2
41-240-2
50-260-280-2
100-2120-2140-2
160-2180-2200-2240-2
25-235-2
41-240-2
50-260-280-2
100-2120-2140-2
160-2180-2200-2240-2
04 C-206 C-2
085-208 A-2
10 A-212 A-216 A-2
20 A-224 A-228 A-2
32 A-236 A-240 A-348 A-2
1/43/8
1/21/2
5/83/41
1 1/41 1/21 3/4
22 1/42 1/2
3
0.1250.188
0.2460.309
0.3700.4950.620
0.7440.9930.993
1.2421.3971.4901.864
0.1300.200
0.3060.313
0.4000.4690.625
0.7500.8751.000
1.1241.4061.5621.875
0.5170.886
1.0121.220
1.4961.9212.469
3.0083.7724.067
4.8545.4575.9807.220
1,9094,477
3,8417,954
13,20418,65932,227
49,86371,56797,158
127,817157,953199,407285,292
0.1880.422
0.5430.751
1.3411.9583.453
5.2307.846
10.152
13.50519.59421.61930.330
1-105-060213
Inner Link Outer Link(Riveted Conn. Link)
Conn. Link with Spring Clip
Conn. Link with Cotter Pins
Half Link with Cotter Pin
Offset Link
Roller Link or Inner Link - Used for replacement of dam-aged rollers.
Offset Link - Used to assemble chain strands when an odd number of pitches is desired.
Connector Link - Used to asemble chain strands when an even number of pitches is desired.
Group: 105
American Metric® CorporationAmetric®
60
American Standard (ANSI) Roller Chain(All dimensions in inches)
Triple Roller Chain
ANSIChain
No.
AverageStrength(lbs)ANSI Stan-
dardWeightlbs/ft
C.L.Width
Extensionk
Ametric®Chain
No.ISONo.
Pitchp
BetweenInnerPlates
b1
RollerDiameter
d1
ChainWidth
l
Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.
0.0200.0310.047
0.0590.0710.075
0.1610.1500.181
0.1890.2280.2720.287
25-335-340-3
50-360-380-3
100-3120-3140-3
160-3180-3200-3240-3
25-335-340-3
50-360-380-3
100-3120-3140-3
160-3180-3200-3240-3
04 C-306 C-308 A-3
10 A-312 A-316 A-3
20 A-324 A-328 A-3
32 A-336 A-340 A-348 A-3
1/43/81/2
5/83/41
1 1/41 1/21 3/4
22 1/42 1/2
3
0.1250.1880.309
0.3700.4950.620
0.7440.9930.993
1.2421.3971.4901.864
0.1300.2000.313
0.4000.4690.625
0.7500.8751.000
1.1241.4061.5621.875
0.8271.2871.787
2.2442.8153.610
4.4175.5675.992
7.1578.0478.799
10.681
2,8646,50011,364
17,68225,25045,090
70,36399,362134,839
177,407223,543276,769399,200
0.0950.7041.274
2.0723.0445.291
7.89311.75514.887
20.13025.62932.87848.013
1-105-060213
b1
GROUP 105
P P
h2T
LL
b1
T
d1 d2
d1 d2
TLc
Lc
Lc TLc
Group: 105
American Metric® CorporationAmetric®
61
American Standard (ANSI) ChainHeavy Duty Series Roller Chains
American Standard (ANSI) ChainS Type Steel Agricultural Chain Attachments
W
P
h2
G
b1 F
d4
h4
K
ANSIChain
No.
S32K1S32K1F1
S42K1S45K1S51K1S52K1
S52K1F1S55K1S62K1
S62A2K1S62F2K1
S77K1S88K1
Group: 105
American Metric® CorporationAmetric®
94
American Standard (ANSI) Special Roller ChainAssembled To Order
To insure customers receive what they need, when they need it, procedures for ordering chains assembled-to-order are established as follows:
1) Quantity of lengths (pieces) of chain required.
2) Ametric® Chain number, ANSI Chain Number or ISO Chain Number.
3) Length of chain in feet / meters, or number of links.
4) Open ended chain (for C.L., O.L. or H.L connection) or endless (riveted connection).
5) Attachment links, if required.
5a) Type of attachments.
Double hole / pitch attachments A2, K2, SA2, SK2 and EP2 (not shown) also available.
*If this information is not available, the following information is required.*
PitchInner width b1Width of inner link b2Roller or bush diameterTransverse pitch e (only for multi-strand chain)Strands (single, double, triple or quadruple)