SAP Note Header Data Symptom The company LANIER belongs to Ricoh, and Ricoh is a gold-level member of the SAP Printer Vendor program and within this program offers support for the printer model / device type pairs listed below. For general information about the SAP Printer Vendor program please check note 1130927. The printer model / device type combinations are visible in the newest data version of the "Device type Wizard". Please read note 1036961 for a description how to use the device type wizard and how to select one of the combinations shown below. The device types are delivered as attachments to this note. Please download the files and proceed with the installation as described in note 1103422. Certain features of the device types become active only with the following releases and support package levels: Additional print options: (see note 1049778) SAP_BASIS 6.20 SP63 and higher SAP_BASIS 6.40 SP21 and higher SAP_BASIS 7.00 SP14 and higher SAP_BASIS 7.10 standard And later SAP versions Printer vendor: Lanier WWW: www.lanier.com (For information on technical support, refer to section D under "Details" below.) Other Terms SPAD, device type, SAP Printer Vendor program, LANIER Solution Supported Printer model / Device type combinations 1266113 - Printer Vendor Wizard Note: Lanier Version 37 Validity: 26.09.2015 - active Language English (Master) Released On 12.10.2015 07:35:57 Release Status Released for Customer Component BC-CCM-PRN-PVP-RC SAP Printer Vendor program: Ricoh BC-CCM-PRN-DVM Printer Administration Priority Recommendations / Additional Info Category Special development Model ID Printer model Device type [DC17] LD035 (Lt1) RC001118 [DC17] LD035 (Lt2) RC001218 [DC17] LD035 (Lt1) RC000118 [DC17] LD035 (Lt2) RC000218 [DC17] LD045 (Lt1) RC001118 [DC17] LD045 (Lt2) RC001218 [DC17] LD045 (Lt1) RC000118 [DC17] LD045 (Lt2) RC000218 [DC17] LD135 (Lt1) RC001118 [DC17] LD135 (Lt2) RC001218 [DC17] LD135 (Lt1) RC000118 [DC17] LD135 (Lt2) RC000218 [DC17] LD145 (Lt1) RC001118 [DC17] LD145 (Lt2) RC001218 [DC17] LD145 (Lt1) RC000118 [DC17] LD145 (Lt2) RC000218 [DC28] LP135n (Lt1) RC001118 [DC28] LP135n (Lt2) RC001218 [DC28] LP135n (Lt1) RC000118 Other Components
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SAP Note
Header Data
Symptom
The company LANIER belongs to Ricoh, and Ricoh is a gold-level member of the SAP Printer Vendor program and within this program offers support for the printer model / device type pairs listed below. For general information about the SAP Printer Vendor program please check note 1130927. The printer model / device type combinations are visible in the newest data version of the "Device type Wizard". Please read note 1036961 for a description how to use the device type wizard and how to select one of the combinations shown below. The device types are delivered as attachments to this note. Please download the files and proceed with the installation as described in note 1103422. Certain features of the device types become active only with the following releases and support package levels: Additional print options: (see note 1049778) SAP_BASIS 6.20 SP63 and higher SAP_BASIS 6.40 SP21 and higher SAP_BASIS 7.00 SP14 and higher SAP_BASIS 7.10 standard And later SAP versions Printer vendor: Lanier WWW: www.lanier.com (For information on technical support, refer to section D under "Details" below.)
Other Terms
SPAD, device type, SAP Printer Vendor program, LANIER
Solution
Supported Printer model / Device type combinations
1266113 - Printer Vendor Wizard Note: Lanier
Version 37 Validity: 26.09.2015 - active Language English (Master)
Released On 12.10.2015 07:35:57
Release Status Released for Customer
Component BC-CCM-PRN-PVP-RC SAP Printer Vendor program: Ricoh
The following four sections provide this detailed information: A. LANIER printer devices: General information B. LANIER Device types: General information C. LANIER printer devices: Model-specific information D. Support information For more information, refer to the technical documentation by LANIER, as indicated in section D below. A. LANIER Printer Devices: General Information LANIER provides a family of printers and multi-functional devices, both color and black-&-white. The devices feature the following functions: - multiple Input bins & Output bins - multiple Paper sizes: from A6,B6, up to A3,12"x18" - Duplex printing - Finishing (Stapling & Punching) [*M] - Job separation [*M] - EconoMode (Toner saving) [*M] - Color printing [*M] - Printing color print jobs as greyscale on black-&-white devices [*M] - Slip sheet printing [*M] - Edge-to-edge printing [*M] - Unicode printing [*U] - Locked printing - Barcoding and OCR-A/B printing [*B][*M] [*B]: Barcoding and OCR-A/B printing requires the "Barcode & OCR Package - Intelligent version" or "Barcode & OCR Package" by LANIER. Refer to note [*B] in section B below. [*M]: This function is not supported on all models. Refer to the model-specific information in section C below. [*U]: Unicode printing may require the "Unicode Font Package" by LANIER, depending on the languages to be printed. Refer to note [*U] in section B below. Unicode printing is supported on all device models, except where stated otherwise in section C below. For model-specific information, refer to section C below. B. LANIER Device Types: General Information LANIER provides a family of generic Device types, based on PCL5 and PJL, that can be used for all supported LANIER printer devices. Currently available are: - RC001U18 - RC001V18 - RC001118 - RC001218 - RC000118 - RC000218 - RC100U18 - RC100118 - RC100218 The Device types are named RCmxxcvv, where: - m = {0,1} indicates the controller type of the device model - xx = {00,01} indicates the functionality supported - c = {U,V,1,2} indicates the character set supported - vv = {18,...} indicates the version They differ with respect to the following functionalities: - barcoding support There are no differences regarding supported fonts, print options, etc. The following barcoding solutions are supported: - RCm00cvv support the "Barcode & OCR Package" - RCm01cvv support the "Barcode & OCR Package - Intelligent version" Refer to note [*B] below. If both RC001 and RC000 Device types exist for a device model, the former should be used if no barcoding is required. The following character sets and languages are supported:
[DC115] Pro 8120 (Lt2) RC000218
Note: In above table, the Device type name is preceded
by the supported character set as follows: - UnA= Unicode
- UnR= (resid)
- Lt1= Latin-1
- Lt2= Latin-2
Note: The suffix "SP" or "SPF" of a model name may be omitted
above.
- (c=U) Unicode (UTF-8): { all languages supported by Unicode v3.0; refer to note [*U] below } - (c=V) Unicode (resident) (UTF-8): { only those languages supported by the device-resident fonts; refer to note [*U] below } - (c=1) Latin-1: (Western Europe): { English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Norwegian, Danish, Finnish } - (c=2) Latin-2: (Eastern Europe): { Hungarian, Polish, Czech, Croatian, Romanian, Slovak, Slovenian } The following SAP font families are supported: - by RCmxxUvv: { ANDALE_J[*U], ANDALE_K[*U], ANDALE_S[*U], ANDALE_T[*U], COURIER, COURCYR, COUR_I7, LETGOTH, HELVE, HELVCYR, HELV_I7, LNPRINT, OCRA[*B], OCRB[*B], TIMES, TIMECYR, TIME_I7 } - by RCmxxVvv: { (same as above, except ANDALE_x) } - by RCmxx1vv and RCmxx2vv: { COURIER, LETGOTH, HELVE, TIMES, LNPRINT, OCRA[*B], OCRB[*B] } The RCmxxcvv Device types support the following options of POSS (Print Options for SAPscript and Smartforms): - Input Tray: to select the input bin - Output Tray: to select the output bin - Print in Color: to change a color print job to greyscale - Double-sided Printing: to select the duplex printing mode (simplex, duplex, tumble) - Stapling Function: to enable stapling and to select the stapling mode - Punch Function: to enable punching and to select the punching mode - Job Separation: to enable the separation between consecutive jobs - User Authentication: to specify a password for Locked printing - Draft Print (Toner saver): to support economical printing with less toner Note: (POSS limitations) Some of these POSS options are not supported on all models, or only if an optional hardware accessory (e.g. a finisher) is installed. Please refer to the model-specific information in section C below. Some device-supported features are not supported by POSS, e.g.: - Slip sheet printing: to insert slip sheets between printed pages - Edge-to-Edge printing: to enlarge the print area to the entire physical page Please refer to note [*C] below. For printing ABAP reports, no POSS-like mechanism is available. Please refer to note [*C] below. Note: (Color printing) The Color flag in the Output device definition should always be checked [X] for a particular model, unless indicated otherwise in section C below. Note: (ABAP printing) The Device types are pre-configured to use the HPL2 ABAP list driver, in order to generate nicer looking output. Should this be unwanted for any reason, it may be disabled. Refer to note [*C] below. Note: [*B] (Barcoding) Barcoding requires the "Barcode & OCR Package - Intelligent version" or the "Barcode & OCR Package" by LANIER. (For the latter note that it does not constitute a SAP standard approach for barcoding and is hence only considered a workaround. Furthermore: - The Device types RC000cvv are only available for Latin-1 and Latin-2, not for Unicode. - With the Unicode Device type RC100Uvv, the hook/fork/chair characters of OCR-A are not supported.) Note: [*C] (Device type customization) For supporting and configuring certain features and settings, modifications in the Device Type may be necessary. This is not possible with the original RCmxxcvv Device types. In order to be able to modify a Device type, a copy has to be created in the Y/Z customer name space. For more information, please refer to the LANIER Web Site for SAP Printing, as indicated in section D below. In case of questions or any problems related to customized Device types, please contact LANIER Technical Support directly, as indicated in section D below. You cannot go via SAP support, since customized Device types are not covered under the Printer Vendor Program. Note: [*U] (Unicode printing) - The device resident fonts support the languages Latin-x, Cyrillic, Greek, and Hebrew. - Unicode printing for languages other than these, requires the "Unicode Font Package" by LANIER, which allows to print them in "Andale" typeface. For other typefaces, please contact LANIER Technical Support. - If no "Unicode Font Package" is installed on a device, the RCmxxVvv Device types should be used. - Hebrew printing is currently only supported with using SAP system fonts COURIER, LETGOTH, and ANDALE_x; not with HELVE and TIMES. Hebrew punctuation and cantillation marks (accents) and points cannot be printed. - There is no Unicode version of the Device types RC000cvv, only of RC001cvv and RC1xxcvv. C. LANIER Printer Devices: Model-Specific Information This section provides, for each supported printer model, information about optional device accessories, support of POSS options, and deviations from the general information in sections A and B above.
The entries are sorted by the model ID [DCxx]. Note: The suffix "SP" or "SPF" of a model name may be omitted. [*W] For yet more and detailed information, refer to the LANIER Web Site for SAP Printing, as indicated in section D below. == [DC17] == LD035, LD045, LD135, LD145 Optional accessories: 1 paper bank, 1 Large Capacity Tray, 1 output tray 3 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not supported / only black-&-white Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. Unicode printing is not supported. == [DC28] == LP135n Optional accessories: hard disk, duplex unit, 2 paper banks Barcode & OCR Package - Intelligent version POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not supported / only black-&-white Double-sided printing: supported with duplex unit Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. Unicode printing is not supported. == [DC35] == LD115, LD118, LD118d, LD116, LD120, LD120d Optional accessories: 2 paper banks, 1-Bin Tray Barcode & OCR Package POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard, 1 optional Color mode: not supported / only black-&-white Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. Unicode printing is not supported. Barcoding: For this model, there is no SAP standard barcoding solution; for a workaround, please refer to [*W] above. == [DC36] == MP 3500 ~ LD335, MP 4500 ~ LD345 Optional accessories: 1 paper bank, 1 Large Capacity Tray, 1 output tray 3 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not supported / only black-&-white
Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. == [DC37] == MP 2510 ~ LD325, MP 3010 ~ LD330 Optional accessories: duplex unit, Bypass tray, 1 paper bank, 1 Large Capacity Tray, 2 output trays 2 finishers Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not supported / only black-&-white Double-sided printing: supported with duplex unit Job separation: supported Stapling: supported with finisher Punching: not supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. == [DC39] == MP 5500 ~ LD255, MP 6500 ~ LD265, MP 7500 ~ LD275, MP 6000 ~ LD260, MP 7000 ~ LD270, MP 8000 ~ LD280 Optional accessories: 1 Large Capacity Tray, 1 output tray 3 finishers (2 with optional punch unit), 9-bin mailbox Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 4 standard, 1 optional Output trays: 12 optional Color mode: not supported / only black-&-white Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. == [DC40] == SP C410DN ~ LP226cn, SP C411DN ~ LP231cn, SP C400DN Optional accessories: hard disk, 2 paper feed units Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC42] == MP C2500 ~ LD425c, MP C3000 ~ LD430c, MP C2000 ~ LD420c Optional accessories: 1 paper bank, 1 Large Capacity Tray, 2 output trays 3 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package
POSS options: Input trays: 3 standard, 2 optional Output trays: 1 standard, 3 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC43] == MP C3500 ~ LD435c, MP C4500 ~ LD445c Optional accessories: 1 paper bank, 1 Large Capacity Tray, 1 output tray 3 finishers (2 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 2 optional Output trays: 1 standard, 3 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC44] == SP 9100DN ~ LP275hdn Optional accessories: 1 Large Capacity Tray, 2 finishers (both with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 1 optional Output trays: 4 optional Color mode: not supported / only black-&-white Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. == [DC46] == MP 1600 ~ LD316, MP 2000 ~ LD320d Optional accessories: 2 paper banks, 1 output tray Barcode & OCR Package - Intelligent version POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard, 1 optional Color mode: not supported / only black-&-white Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. Unicode printing: only with resident fonts. Under Unicode, OCR-A printing is not fully supported. == [DC47] == SP C811DN ~ LP440c Optional accessories: 2 paper banks, 1 Large Capacity Tray 2 finishers (both with optional punch unit)
Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard, 2 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC50] == SP 4100N ~ LP131n, SP 4110N ~ LP136n, SP 4100NL ~ LP131nL Optional accessories: hard disk, duplex unit, 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not supported / only black-&-white Double-sided printing: supported with duplex unit Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition must be unchecked [_]. == [DC51] == SP C420DN ~ LP331cn Optional accessories: hard disk, 3 paper feed units Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC52] == MP C6000 ~ LD260c, MP C7500 ~ LD275c Optional accessories: 2 Large Capacity Trays, 1 output tray 3 finishers (1 with optional punch unit), 9-bin mailbox Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 4 standard, 1 optional Output trays: 1 standard, 10 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC53] == MP 4000/4000B ~ LD040/LD040B, MP 5000/5000B ~ LD050/LD050B, MP 4001 ~ LD140/LD140G, MP 5001 ~ LD150/LD150G Optional accessories:
hard disk, 2 paper banks, 1 Large Capacity Tray, 1 output tray 3 finishers (2 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC54] == MP 2550/2550B ~ LD425/LD425B, MP 3350/3350B ~ LD433/LD433B, MP 2851 ~ LD528, MP 3351 ~ LD533 Optional accessories: duplex unit, 2 paper banks, 1 Large Capacity Tray, 1 output tray 3 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not needed / always grayscale Double-sided printing: supported with duplex unit Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC57] == SP 8200DN ~ LP150dn Optional accessories: hard disk, 2 paper banks, 1 Large Capacity Tray 2 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 2 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC59] == SP 4210N ~ LP37N Optional accessories: duplex unit, hard disk, 2 paper banks Barcode & OCR Package - Intelligent version (needs hard disk) Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported with duplex unit Job separation: not supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC60] ==
Pro 907EX, Pro 1107EX, Pro 1357EX Optional accessories: 2 Large Capacity Trays, 1 multi-bypass tray, 1 output tray 2 finishers (all with optional punch unit), 2 stacker trays Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 4 optional Output trays: 1 standard, 3 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC61] == MP C2800 ~ LD528C/LD528CG, MP C3300 ~ LD533C/LD533CG, LD630C/LD630CG, LD635C/LD635CG Optional accessories: 3 paper banks, 1 Large Capacity Tray, 2-3 output trays 3 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3-4 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC62] == MP C4000 ~ LD540C/LD540CG, MP C5000 ~ LD550C/LD550CG, LD645C/LD645CG, LD655C/LD655CG Optional accessories: 2 paper banks, 1 Large Capacity Tray, 2-3 output trays 3 finishers (2 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3-4 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC63] == MP C2050 ~ LD520C, MP C2550 ~ LD525C, LD620C, LD625C Optional accessories: 2 paper banks, 3 output trays 1 finisher (with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 2 optional Output trays: 1 standard, 4 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks:
The color flag in the Output Device definition should be checked [X]. == [DC63L] == LD520CL Optional accessories: 2 paper banks, 2 output trays POSS options: Input trays: 3 standard, 2 optional Output trays: 1 standard, 2 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling & Punching: not supported User authentication: not supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. Barcoding: For this model, there is no SAP standard barcoding solution; for a workaround, please refer to [*W] above. Unicode printing: only with resident fonts == [DC64] == SP C820DN ~ LP540C, SP C821DN ~ LP550C Optional accessories: hard disk, 2 paper banks, 1 Large Capacity Tray 2 finishers (all with optional punch unit), 4-bin mailbox Unicode Font Package (needs hard disk) POSS options: Input trays: 3 standard, 4 optional Output trays: 1 standard, 6 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. Barcoding: For this model, there is no SAP standard barcoding solution; for a workaround, please refer to [*W] above. == [DC68] == Pro 907, Pro 1107, Pro 1357 Optional accessories: Bypass tray, 2 Large Capacity Trays, 2 Stacker output trays 2 finishers (both with optional punch unit) POSS options: Input trays: 3 standard, 4 optional Output trays: 4 optional Color mode: not supported / only black-&-white Double-sided printing: supported Job offset: supported Stapling: supported with finisher (*) Punching: supported with finisher and punch unit (*) User authentication: not supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition must be unchecked [_]. Barcoding: For this model, there is no SAP standard barcoding solution; for a workaround, refer to [*W] above. Unicode: The Unicode Font Package is integrated with the device. (*) Short-edge stapling & punching with SAP Paper formats { DINA4, DINA5, LETTER, EXECUTIV } requires a workaround; refer to [*W] above. == [DC69] == MP 6001 ~ LD261, MP 7001 ~ LD271, MP 8001 ~ LD281, MP 9001 ~ LD291 Optional accessories: 1 Large Capacity Tray, 1 output tray 3 finishers (all with optional punch unit), 9-bin mailbox Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 4 standard, 1 optional Output trays: 1 standard, 10 optional
Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC70] == MP 171SPF ~ LD117, MP 201SPF Optional accessories: hard disk, 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC72] == SP 6330N ~ LP235N Optional accessories: hard disk, duplex unit, 2 paper feed units Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported with duplex unit Double-sided printing: supported with duplex unit Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC73] == MP C6501SP ~ LD365C, MP C7501SP ~ LD375C Optional accessories: 2 Large Capacity Trays, 1 output tray 3 finishers (1 with optional punch unit), 9-bin mailbox Unicode Font Package POSS options: Input trays: 4 standard, 1 optional Output trays: 11 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC76] == LP137CN, LP142CN Optional accessories: hard disk, 3 paper feed units Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard Color mode: color or grayscale
Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC77] == MP C300 ~ LD130C, MP C300SR ~ LD130CSR, MP C400 ~ LD140C, MP C400SR ~ LD140CSR Optional accessories: 2 paper banks, 2 output trays, finisher Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 1 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: not supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC78] == SP C320DN Optional accessories: hard disk, 1 paper bank Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 1 standard, 1 optional Output trays: 1 standard Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC79] == SP 5200S, SP 5210SR, SP 5210SF Optional accessories: 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 2 standard, 3 optional Output trays: 1-2 standard, 0 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: only supported by SP 5210SR Punching: not supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC80] == SP 5200DN, SP 5210DN Optional accessories: hard disk, 2 paper bank Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 4 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported
Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC81] == MP 2352, MP 2852, MP 3352 Optional accessories: hard disk, Bypass tray, 2 paper banks, 1 Large Capacity Tray, 2 output trays, 4 finishers (2 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 4 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC82] == SP 4310N Optional accessories: hard disk, duplex unit, 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported with duplex unit Job separation: not supported Punching & Stapling: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC83] == MP 4002/4002G, MP 5002/5002G Optional accessories: 2 paper banks, 1 Large Capacity Tray, 3 output trays, 3 finishers (2 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: supported with finisher and punch unit User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC84] == MP C4502/C4502G, MP C5502/C5502G Optional accessories: 2 paper banks, 1 Large Capacity Tray, 3 output trays, 3 finishers (2 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 3 optional
Output trays: 1 standard, 3 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC85] == MP C3002/C3002G, MP C3502/C3502G Optional accessories: 2 paper banks, 1 Large Capacity Tray, 3 output trays, 3 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC87] == MP C305SP Optional accessories: hard disk, 2 paper banks, 1 output tray Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard, 1 optional Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC88] == MP 6002, MP 7502, MP 9002 Optional accessories: 1 Large Capacity Tray, 1 output tray, 3 finishers (all with optional punch unit), 9-bin mailbox Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 4 standard, 1 optional Output trays: 1 standard, 10 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC89] == MP 301 Optional accessories: hard disk, 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk)
POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC91] == SP 8300DN Optional accessories: hard disk, 2 paper banks, 1 Large Capacity Tray, 2 finishers (1 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC92] == SP C830DN, SP C831DN Optional accessories: hard disk, 2 paper banks, 1 Large Capacity Tray, 2 finishers (all with optional punch unit), 4-bin mailbox Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 3 standard, 3 optional Output trays: 1 standard, 6 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC93] == SP C730DN Optional accessories: hard disk, 1 output tray Barcode & OCR Package Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 3 optional Output trays: 1 standard Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC94] == MP 2001, MP 2501 Optional accessories: hard disk, 2 paper banks, 1 output tray
Barcode & OCR Package - Intelligent version Unicode Font Package (needs hard disk) POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard, 1 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported (needs hard disk) Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC95] == MP C6502SP, MP C8002SP Optional accessories: 2 Large Capacity Tray 3 finishers (all with optional punch unit), 9-bin mailbox Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 4 standard, 2 optional Output trays: 1 standard, 11 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC96] == Pro C5100S, Pro C5110S Optional accessories: 2 Large Capacity Tray 3 finishers (all with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 4 standard, 2 optional Output trays: 1 standard, 11 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. If you have purchased the Fiery controller for this model, and want to use Fiery controller to print SAP documents, please go to LANIER website to get the SAP DT for Fiery controller.
== [DC98] == MP C3003, MP C3503, MP C4503, MP C5503, MP C6003, MP C2003, MP C2503 Optional accessories: 3 Large Capacity Tray 6 finishers (5 with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 2 standard, 4 optional Output trays: 1 standard, 6 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X].
== [DC99] == Pro 8100S/EX, Pro 8110S, Pro 8120S Optional accessories: 8 paper banks 5 finishers (all with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 8 optional Output trays: 1 standard, 2 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC100] == MP 2553, MP 3053, MP 3353 Optional accessories: 1 paper banks, 1 Large Capacity Tray 3 finishers (all with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 2 standard, 2 optional Output trays: 1 standard, 4 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC101] ==
SP 4510SF, MP 401SPF
Optional accessories: 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package
POSS options: Input trays: 1 standard Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported Draft print (Toner saver): supported
Remarks: The color flag in the Output Device definition should be checked [X].
== [DC102] ==
SP 4510DN, SP 4520DN
Optional accessories: 2 paper banks Barcode & OCR Package Unicode Font Package
POSS options: Input trays: 1 standard Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported Draft print (Toner saver): supported
Remarks: The color flag in the Output Device definition should be checked [X].
== [DC103] == MP C401, MP C401SR Optional accessories: 2 paper banks, 2 output trays, finisher Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 1 standard, 3 optional Output trays: 1 standard, 3 optional Color mode: color or grayscale Double-sided printing: supported Job separation: supported Stapling: supported with finisher Punching: not supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC107] == SP 6430DN Optional accessories: 3 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 1 standard, 3 optional Output trays: 1 standard Color mode: not needed / always grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported Draft print (Toner saver): not supported Remarks: The color flag in the Output Device definition should be checked [X]. == [DC108] ==
Remarks: The color flag in the Output Device definition should be checked [X].
== [DC112] == SP C440DN Optional accessories: 3 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 1 standard, 3 optional Output trays: 1 standard Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported Draft print (Toner saver): not supported
Remarks: The color flag in the Output Device definition should be checked [X].
== [DC113] ==
MP C306,MP C406
Optional accessories: 2 paper banks Barcode & OCR Package - Intelligent version Unicode Font Package
POSS options: Input trays: 1 standard, 2 optional Output trays: 1 standard Color mode: color or grayscale Double-sided printing: supported Job separation: not supported Stapling: not supported Punching: not supported User authentication: supported Draft print (Toner saver): supported
Remarks: The color flag in the Output Device definition should be checked [X].
== [DC115] == Pro 8110, Pro 8120 Optional accessories: 8 paper banks 5 finishers (all with optional punch unit) Barcode & OCR Package - Intelligent version Unicode Font Package POSS options: Input trays: 3 standard, 8 optional Output trays: 1 standard, 2 optional Color mode: not needed / always grayscale Double-sided printing: supported Job separation: supported Stapling: supported Punching: supported User authentication: supported Draft print (Toner saver): supported Remarks: The color flag in the Output Device definition should be checked [X]. D. Support Information Printer model / Device type Support policy by LANIER The printer models are supported as listed above. For old legacy models not listed, no support is planned. New models will normally be added when they are introduced in the market. In the case of need for Device types to support a new model or a specific language, please contact SAP Support, as described in SAP note 1103826. The ZA0x Device types that LANIER released in the past can only be supported by LANIER Technical Support, not via SAP Support. LANIER Technical Documentation For additional and more detailed information, please refer to the technical documentation that can be accessed from the LANIER Web Site for SAP Printing. LANIER Web Site for SAP Printing (http://www.lanier.com/downloads) LANIER Technical Support For information that is not covered by the LANIER Technical Documentation and for questions and issues that cannot be handled by SAP Support, such as problems with customized Device types in the Y/Z name space, please contact the company that you obtained the LANIER devices from.
Validity
This document is not restricted to a software component or software component version