000-104

IBM 000-104

000-104 AIX 6.1 Administration

Practice TestVersion 3.0

Actu

alTe

sts.

com

QUESTION NO: 1

Which command restores files from a volume group backup on a specified media?

A. mksysb -r

B. savevg -r

C. restorevg -r

D. restorevgfiles

Answer: A

QUESTION NO: 2

A non-root user can run rsh commands from serverA to serverB, but attempts to run rsh

commands by the root user return with apermission error message. What action will resolve the

problem?

A. Add root user to the /etc/hosts.equiv on serverB.

B. Create $HOME/.rhosts file for the root user on serverB.

C. Restart thershd daemon with root enabled option on serverB.

D. Add entry to allow root user fromserverA to the /etc/hosts.allow on serverB.

Answer: D

QUESTION NO: 3

A recently installed package needs to be rolled back to aprevious version. Which of the following

commands will perform the task?

A. reject

B. cleanup

C. deinstall

D. uninstall

Answer: A

QUESTION NO: 4

How can a JFS2 filesystem be added to a volume groupthat has insufficient space to host a log

LV?

A. Create thefilesystem with an inline log.

IBM 000-104: Practice Exam

"Pass Any Exam. Any Time." - www.actualtests.com 2

Actu

alTe

sts.

com

B. Create thefilesystem referring to the jfs2log in rootvg.

C. Create thefilesystem and format the logical volume with 'logform'.

D. Create thefilesystem's underlying logical volume with an inline log.

Answer: C

QUESTION NO: 5

Which of the following allows multiple applications toshare a single operating system resource?

A. Logical Partition

B. Workload Partition

C. Dynamic Logical Partition

D. Shared Processor Logical Partition

Answer: B

QUESTION NO: 6

When ordering a new IBM Power Systems server, a customer is given the option of two types of

Hardware Management Console:7042-CR4 and 7042-C06.Which main difference between the

options would influence the customer's decision?

A. The 7042-CR4 is a rack mounted model, compared to the 7042-C06, which is a desktop.

B. The 7042-CR4 is limited to 16 managed systems, compared to a limit of 32 for the 7042-C06.

C. The 7042-C06 has faster CPUs and twice the RAM compared to the 7042-CR4,which is suited

to large enterprise deployments.

D. The 7042-C06 can manage POWER5-based hardware, in addition to POWER6, while the

7042-CR4 can only manage POWER6-based hardware.

Answer: C

QUESTION NO: 7

Which port must be open on the HMC to allow remote web access?

A. 22

B. 80

C. 443

D. 8080



Actu

alTe

sts.

com

Answer: C

QUESTION NO: 8

Which are the two main uses of a VIO server?

A. Virtualize network and memory to LPARs.

B. Virtualize network and storage to LPARs.

C. Virtualize memory and processors to LPARs.

D. Virtualize storage and processors to LPARs.

Answer: B

QUESTION NO: 9

Which POWER6 virtualization technology is the minimum to enable multiple shared processor

pool functionality?

A. PowerHA Standard Edition

B. PowerVM Standard Edition

C. Power6 Management Edition

D. Power6 Virtualization Edition

Answer: B

QUESTION NO: 10

What is the minimum amount of memory required for a new LPAR to be built via NIM on AIX6.1?

A. 128 MB

B. 256 MB

C. 512 MB

D. 1024 MB

Answer: B

QUESTION NO: 11

What is the theoretical maximum number of logical ports that a one port of a 2-port 10Gb IVE can

provide if no VIO Server is connected to the IVE?



Actu

alTe

sts.

com

A. 2

B. 4

C. 8

D. 16

Answer: D

QUESTION NO: 12

An administrator wants to deploy a complex LPAR environment on a 595. What is the most current

tool available for documenting the proposed LPAR configuration and determining if there are

adequate IO resources?

A. LPAR Planning Tool.

B. System Planning Tool.

C. LPAR Validation Tool.

D. System Validation Tool.

Answer: B

QUESTION NO: 13

Where will an administrator find documents in PDFformat that include detailed architecture and

step-by-step installation instructions for Power servers?

A. AIX Fix Central

B. IBM Developer Works

C. IBM Systems Software Information Center

D. IBM Systems Hardware Information Center

Answer: D

QUESTION NO: 14

Which of the following is a situation where dual (redundant) HMCs are recommended?

A. When managing more than four VIO servers.

B. When installed with Power 570 and larger hardware.

C. When hosting both Linux and AIX on the same physical hardware.

D. When unexpected outage on a single HMC would prove an untenable risk for the hosted

LPARs.



Actu

alTe

sts.

com

Answer: D

QUESTION NO: 15

A customer has a requirement for a single AIX LPAR to be highly available. The customer only

has enough funding to purchase a single system. Which would be the most critical option to

mitigate AIX availability?

A. Dual power supplies.

B. Twice the amount of disk.

C. Two dual-port LHEA adapters.

D. Two dual-portfibre channel adapters.

Answer: A

QUESTION NO: 16

What is the difference between the CUoD and Utility Capacity On Demand?

A. Utility allows for activation of resources by the hour.CUoD allows for permanent access to

additional resources installed into the system.

B. Utility allows for permanent access to additional resources installed into the system.CuOD

allows for activation of resources by the hour.

C. Utility allows for activation of resources by the minute.CUoD allows for permanent access to

additional resources installed into the system.

D. Utility allows for a 30 day usage of additional resources installed into the system.CUoD allows

for permanent access to additional resources installed into the system.

Answer: C

QUESTION NO: 17

An administrator plans to use bootable AIX media to boot a system into maintenance mode. The

system is running AIX 5.3 TL09 with a64-bit kernel. The administrator has a selection of media

available. Which media should the administrator use?

A. Any AIX bootable media, providing it is a 64-bit variant

B. Any AIX bootable media, providing it is AIX 5.1 or later

C. Any AIX 5.3 bootable media, providing it is TL09 or later

D. Any AIX 6.1 bootable media, providing it is TL02 or later



Actu

alTe

sts.

com

Answer: C

QUESTION NO: 18

In which file created by a mksysb would an administrator find filesystem and logical volume

information?

A. /fs.data

B. /image.data

C. /bosinst.data

D. /install.data

Answer: B

QUESTION NO: 19

Which command can be used to show volume group information about filesystems and OS levels

for a specified mksysb called server1.mksysb?

A. lsmksysb -lf server1.mksysb

B. restore -mrT server1.mksysb

C. listbackup -fT server1.mksysb

D. listvgbackup -l server1.mksysb

Answer: A

QUESTION NO: 20

A backup is taken using the following command:tar -cvf abcdef.tar /usr/local/include/tcpd.h

The operator is in the directory /usr/local/restores and runs the following command: tar -xvf

abcdef.tar Where will the file be restored?

A. /usr/local/include/tcpd.h

B. /usr/local/restores/tcpd.h

C. /usr/local/restores/include/tcpd.h

D. /usr/local/restores/usr/local/include/tcpd.h

Answer: A

QUESTION NO: 21



Actu

alTe

sts.

com

An administrator is applying a corrective service to their HMC. The corrective service has been

shipped on 3 DVDs. Which action will ensure the corrective service is correctly installed?

A. Select the option to automatically reboot the HMC.

B. Select the option to automatically reboot the HMC after each disk.

C. Shutdown all managed LPARs prior to beginning the install process.

D. Copy all disks into the ""SERVICE"" directory and select concurrent install.

Answer: A

QUESTION NO: 22

A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1.

What must be done to donate any unusedprocessing capacity to the shared processor pool?

A. In the HMC Properties, select the options to allow processor sharing when the partition is

inactive and active.

B. In the LPAR Properties, select the options to allow processor sharing when the partition is

inactive and active.

C. In the LPAR Profile Properties, select the options to allow processor sharing when the partition

is inactive and active.

D. In the 595 Managed System Properties, select the options to allow processor sharing when

partitions are inactive and active.

Answer: C

QUESTION NO: 23

The administrator changed the number of virtual processors from 1 to 2 in the default_profile of an

LPAR. The operator ran the cfgmgr command expecting to see 2 processors after that, but did not

see them. What action must be done to apply the changes?

A. Reboot AIX within the LPAR.

B. Runcfgmgr against the device sys0.

C. Shutdown and then activate thedefault_profile.

D. Ensure the RSCT daemon is operative and runcfgmgr again.

Answer: C

QUESTION NO: 24



Actu

alTe

sts.

com

An administrator needs to recover an HMC due to a failed disk. The disk has been replaced,

allowing the administrator to reinstall the HMC back to the required release of software. Backups

of both the HMC Console Data and Upgrade Data are available. After reloading the HMC with the

Recovery DVDs, what are the next steps to restore the HMC configuration?

A. Use the 'HMC Management > Restore HMC Data' option to first restore just the HMC Data..

B. Use the 'HMC Management > Restore Upgrade Data' option to first restore just the Upgrade

Data.

C. Use the 'HMC Management > Restore HMC Data' option to first restore the HMC Data and then

the Upgrade Data.

D. Use the 'HMC Management > Restore Upgrade Data' option to first restore the Upgrade Data,

and then the HMC Data.

Answer: A

QUESTION NO: 25

An administrator is looking for the "Open RestrictedShell Terminal" option on the HMC GUI. Under

which panel is this option available?

A. HMC Management, but only from a local connection

B. Service Management, but only from a local connection.

C. Systems Management, but only from a local connection.

D. Systems Management, but only from a remote connection.

Answer: A

QUESTION NO: 26

Following an unscheduled power outage, the administrator needs to power up an IVM-managed

system. For the given system, what is the first step in this process?

A. Physically press the appropriate button on the system.

B. Physically disconnect and reconnect the power cable on the system.

C. Log into the IVM using a Web Browser, select the managed-system and select the Power on

option from the Operations menu.

D. Log into the HMC using a Web Browser, select the managed-system and select the Power on

option from the Operations menu.

Answer: A



Actu

alTe

sts.

com

QUESTION NO: 27

An administrator wants to host several LPARs on a JS23 Blade server. To achieve this, what

additional management software is required?

A. HMC

B. IVM

C. VIOS

D. IBM Director

Answer: C

QUESTION NO: 28

On which HMC GUI panel can the 'Enable Electronic Service Agent' option be found?

A. HMC Management

B. Systems Management

C. Service Management

D. Electronic Management

Answer: C

QUESTION NO: 29

The system hangs at boot time after starting NFS services. What is the most likely cause?

A. The action parameter ofrcnfs in /etc/inittab is 'off' and the script called is not exiting.

B. The action parameter ofrcnfs in /etc/inittab is 'wait' and the script called is not exiting.

C. The action parameter ofrcnfs in /etc/inittab is 'once' and the script called is not exiting.

D. The action parameter ofrcnfs in /etc/inittab is 'respawn' and the script called is not exiting.

Answer: B

QUESTION NO: 30

The administrator created an entry in the inittab for run level 2. The system was already booted in

normal mode. Which will start the newly created entry?

A. init 1

B. /etc/rc

C. telinit q



Actu

alTe

sts.

com

D. /etc/rc.d/rc2.d

Answer: C

QUESTION NO: 31

How can an administrator view the service bootlist?

A. service -lbootlist

B. bosboot -ad service

C. listboot -l service

D. bootlist -om service

Answer: D

QUESTION NO: 32

An administrator has mirrored rootvg onto hdisk1,after the physical volumes finished syncing the

administrator wants to add the newdisk to the boot order.Currently the boot order looks like:

hdisk0 blv=hd5 Which of the following commands will add hdisk1 to the current boot order?

A. bootset -a hdisk1

B. bootlist -om normal hdisk1

C. setbootlist -m hdisk0 hdisk1

D. bootlist -om normal hdisk0 hdisk1

Answer: D

QUESTION NO: 33

After mirroring rootvg, a system administrator wants to validate that the system will boot correctly.

Which of the following tasks must be performed before changing the boot order?

A. Run abosboot -a command

B. Mirror the hd5 on the two disks

C. Set up another service modebootlist

D. Check the disks usinga lsvg -p rootvg command

Answer: C



Actu

alTe

sts.

com

QUESTION NO: 34

A system was rebooted and is taking a long time to return. The administrator has logged into the

HMC and sees reference code 0c9. What does this mean?

A. The system is configuring a device.

B. A system initiated dump has started.

C. The system is varying on a volume group.

D. The system is running an inbuilt self test.

Answer: B

QUESTION NO: 35

Which key should be pressed on an ASCII terminal during the system initialization to force the

system to read from the default bootlist?

A. 1

B. 3

C. 5

D. 9

Answer: C

QUESTION NO: 36

An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the

disk so it can be used as the primary boot partition on the next reboot. Which command should the

administrator use?

A. bosboot -ad hdisk2

B. mkblv -y bootlv hdisk2

C. crlv -t bootlv -d hdisk2

D. bootlist -om normal hdisk2

Answer: A

QUESTION NO: 37

A system has two configured fibre channel cards, one of which, fsc0, has failed and must be

replaced. Which command should an administrator use to remove the card device and attached

child devices?



Actu

alTe

sts.

com

A. rmdev -Rdl fcs0

B. rmdev -cdl fcs0

C. rmdev -cdl fscsi0

D. rmdev -Rdl fscsi0

Answer: A

QUESTION NO: 38

Which command enables new devices that are connected to the scsi5 adapter without performing

a full scan of the system?

A. cfgmgr -f scsi5

B. cfgmgr -i scsi5

C. cfgmgr -t scsi5

D. cfgmgr -l scsi5

Answer: D

QUESTION NO: 39

Which command will enable the administrator toquery the current network adapter configuration?

A. netstat -v

B. entstat -d

C. lsattr -El

D. lsdev -C -attr

Answer: A

QUESTION NO: 40

Which command can be used to display information from the PvDv object class in the ODM?

A. odmlist

B. odmshow

C. lsdev -P

D. lsattr -El

Answer: C



Actu

alTe

sts.

com

QUESTION NO: 41

Which command will allow the creation of a10-character login user name?

A. chlogin -a log_name=10

B. chdev -l sys0 -a max_logname=10

C. chusr extended_logname=true [userid]

D. chuser login_name=10 extended_logname=true [userid]

Answer: B

QUESTION NO: 42

What is the correct method for deleting 'paging04'paging space?

A. swapoff paging04 rmps paging04

B. swapoff /dev/paging04 rmps paging04

C. swapoff paging04 rmps /dev/paging04

D. swapoff /dev/paging04 rmps /dev/paging04

Answer: B

QUESTION NO: 43

Which command will activate a defined paging space?

A. swapon paging01

B. chps a y paging01

C. mkps a /dev/paging01

D. swap a /dev/paging01

Answer: A

QUESTION NO: 44

How is the default print queue identified?

A. The first queue in queueconfig file

B. The stanza 'default = 1' is present in the queueconfig file

C. The backend @server has 'remback -p default' in the queue config file

D. The stanza 'default = [queuename]' is present in the queue config file



Actu

alTe

sts.

com

Answer: A

QUESTION NO: 45

A user is unable to determine the default system texteditor. How can the local administrator assist

the user by identifying the default text editor for the system?

A. Login as the user and run 'echo $ENV'.

B. Login as root and run the 'env' command.

C. Login as root and 'cat /etc/environment'.

D. Login as the user and run the 'env' command.

Answer: B

QUESTION NO: 46

Which command will migrate a filesystem from onevolume group to another?

A. cpfs

B. cplv

C. mkfscopy

D. migratepv

Answer: B

QUESTION NO: 47

A new LPAR has been created that needs SAN attached disk for a database. After AIX has been

installed, the fibre cables are attached to the adapters.How should the administrator configure the

disks?

A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the

server, run 'cfgmgr' to discover and configure the disks.

B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the


C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the


D. Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the


Answer: D



Actu

alTe

sts.

com

QUESTION NO: 48

An administrator needs to configure a server (192.168.22.22) as a temporary solution for an NTP

master that has stopped working. What is the process for configuring the NTP master?

A. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line 'fudge

127.127.1.0 stratum 0', and then refresh the daemon.

B. Edit the /etc/ntp.conf file changing the server line to 'server 127.127.1.0' and add the line

'master 127.127.1.0 stratum 0', and then refresh the daemon.

C. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and add the line

'fudge 192.168.22.22 stratum 0', and then refresh the daemon.

D. Edit the /etc/ntp.conf file changing the server line to 'server 192.168.22.22' and addthe line

'master 192.168.22.22 stratum 0', and then refresh the daemon.

Answer: C

QUESTION NO: 49

How should a DNS client be configured?

A. Edit the /etc/netsvc.conf file to have a nameserver and a domain search order.

B. Edit the /etc/resolv.conf file to have a nameserver and a domain search order.

C. Edit the /etc/resolv.conf file to have a nameserver, domain, and domain search order.

D. Edit the /etc/netsvc.conf file to have a nameserver, domain, and domain search order.

Answer: C

QUESTION NO: 50

An administrator issued a command to update thefirmware of an Ethernet adapter on a partitioned

system, but received an error. What is the most likely cause of the problem?

A. The adapter must be taken offline prior to the firmware update.

B. The system has not been rebooted since the adapter was added to the LPAR.

C. The adapter must be assigned to the service partition prior to updating the firmware.

D. The adapter must be dynamically removed from the LPAR prior to updating the firmware.

Answer: A



Actu

alTe

sts.

com

QUESTION NO: 51

A system is experiencing packet routing problems, when the administrator runs 'netstat -nr' the

following default routes are displayed: default165.253.251.1UG51601304 en8-default

192.168.50.1UGH01590450 en4-- Assuming the first route is correct, how can the administrator

remove the incorrect default route?

A. route delete default 192.168.50.1

B. accesssmit with the route_remove shortcut

C. chdev -l inet0 -a delroute=net,-hopcount,0,,192.168.50.1

D. flush the routing table from the console and configuring the 165.253.251.1 route

Answer: C

QUESTION NO: 52

An administrator has set up serverA and serverB to use the /etc/hosts.equiv file so that

applications on serverA can remotely run commands on serverB. Which command will verify if a

new user from serverA is trusted on serverB?

A. As the root user fromserverA run the command rhost serverB.

B. As the root user fromserverA run the command rlogin serverB.

C. As the desired user fromserverB run the command rhost serverA.

D. As the desired user fromserverA run the command rlogin serverB.

Answer: D

QUESTION NO: 53

The ping loopback hangs with no output. Which of the following is the most likely cause?

A. The loopback interface is down andresolv.conf is configured.

B. The loopback is not in /etc/hosts andresolv.conf is configured.

C. The loopback interface is down andresolv.conf is not configured.

D. The loopback is not in /etc/hosts andresolv.conf is not configured.

Answer: D

QUESTION NO: 54

After updating serverB's network configurations, an administrator notices that serverA, which

resides in a different subnet, is unable to communicate with serverB via ssh or telnet. As ping's to



Actu

alTe

sts.

com

the server fail, the administrator logs onto serverB via a console and finds an available interface

en0 in the 'up' state. From the console connection, en0 can communicate with other servers in the

same subnet. What is the most likely cause of the problem?

A. en0 has no associatedip address.

B. serverB is missing its default route.

C. serverB and serverA cannot connect due to a firewall.

D. en0 has been set up to block traffic from servers that are in different subnets.

Answer: B

QUESTION NO: 55

A project requires a new server to be set up with the ability to automatically fail over its Ethernet

connection to a second connection if a network failure occurs. Which of the following provides

greatest resiliency?

A. Two switch ports will be needed on a switch, two Ethernet cables will be needed for the server

each connecting to two different Ethernet cards, and one IP address will be needed.

B. Two switch ports will be needed on two different switches, two Ethernet cables will be needed

for the server each connecting to two different Ethernet cards, and one IP address will be needed.

C. Two switch ports will be needed on two different switches, two Ethernet cables will be needed

for the server each connecting to two different Ethernet cards,two different IP addresses will be

needed.

D. One switch port will be needed on one switch, a splitter will be needed to split the connection,

two Ethernet cables will be needed for the server each connecting to two different Ethernet cards,

and two different IP addresses will be needed.

Answer: B

QUESTION NO: 56

Which daemon identifies available filesystems throughthe /etc/xtab file?

A. nfsd

B. biod

C. rpc.lockd

D. rpc.mountd

Answer: D



Actu

alTe

sts.

com

QUESTION NO: 57

Which file contains the attributes used to setup a new user account when executing 'mkuser'

without any flags?

A. /etc/security/user

B. /etc/security/passwd

C. /etc/security/mkuser.sys

D. /etc/security/mkuser.default

Answer: D

QUESTION NO: 58

Which command should be used to reset a failed login count?

A. chsec

B. chusr

C. passwd

D. chgusrprf

Answer: A

QUESTION NO: 59

Which command will set the core size file to unlimitedfor the user 'webapp'?

A. no -p 'core=-1'webapp

B. chuser 'core=-1' webapp

C. setsenv -attr 'core=unlimited' webapp

D. chsec -f '/etc/security/limits' 'core=-1' webapp

Answer: B

QUESTION NO: 60

Which environment variable must be changed in auser's profile so that upon login, the command

prompt identifies the server?

A. PMT

B. PS1

C. PRT



Actu

alTe

sts.

com

D. PT1

Answer: B

QUESTION NO: 61

Which command will change the user webserver's shell to ksh93?

A. chshell -ksh93 webserver

B. chsh webserver /usr/bin/ksh93

C. chuser -a shell=/usr/bin/ksh93 webserver

D. setuid -a SHELL=/usr/bin/ksh93 -u webserver

Answer: B

QUESTION NO: 62

Which command will display the current control keysettings?

A. 'tty -l'

B. 'stty -a'

C. 'lstty -a'

D. 'terminfo -l'

Answer: B

QUESTION NO: 63

How should read, write and execute permissions for 'group' and 'other' be granted to all files and

directories within the /app filesystem?

A. chmod -R 677 /app

B. chmod -R 664 /app

C. chmod -r 677 /app

D. chmod -r 664 /app

Answer: A

QUESTION NO: 64



Actu

alTe

sts.

com

What should an administrator do to set up a required role for a user id that will allow it to start/stop

WPARs on the server?

A. On the desired WPAR:mkrole authorizations=aix.wpar.system newRolesetkst -t role

chuser roles=newRole default_roles=newRole user1

B. On the global environment:mkrole authorizations=aix.wpar.system newRolesetkst -t role chuser

roles=newRole default_roles=newRole user1

C. On the desired WPAR: Edit the /etc/security/authorizations file adding: 'newRole

authorizations=aix.wpar.system' setkst -t rolechuser roles=newRole default_roles=newRole user1

D. On the global environment: Edit the /etc/security/authorizations fileadding:'newRole

authorizations=aix.wpar.system' setkst -t role chuser roles=newRole default_roles=newRole user1

Answer: B

QUESTION NO: 65

Which installation method enables the quickest recovery in the event of failure when upgrading

from AIX 5.3 to AIX 6.1?

A. Usealt_disk_install.

B. Apply the upgrade without commit.

C. Use a backup image from a NIM server.

D. Usea mksysb image from a locally attached DVD-RAM.

Answer: A

QUESTION NO: 66

An administrator is installing AIX. The SMS panel lists the following network adapter:

NIC Adapters DeviceLocation CodeHardware 1.Interpartition Logical LANU9123.710.1008B1AV4-

C2-T15e5a00004002The NIM server is running in another LPAR on the same managed system.

What speed and duplex should be configured on this adapter?

A. 100/Full

B. 1000/Half

C. 1000/Auto

D. Auto/Auto

Answer: D



Actu

alTe

sts.

com

QUESTION NO: 67

An administrator migrates from AIX 5.3 to AIX 6.1. Upon completion, a client questions why files

are missing from /tmp. How should the administrator respond to the client?

A. Explain that the files never existed in the first place.

B. Explain that during a Migration install the /tmp filesystem is overwritten.

C. Explain that after a Migration install, all systemfilesystems will be empty.

D. Explain that /tmp is temporary storage and files are automatically removed every 30 days.

Answer: B

QUESTION NO: 68

What are the steps required to perform a Preservation install on a server?

A. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade, Preservation

install for the install type, and allow upgrade to run.

B. Shut down the server and perform a network boot from a local NIM server. SelectPresevation

install for the install type, and allow upgrade to run.

C. Shutdown the server and boot it into SMS. Select SMS menu option OS Upgrade,Presevation

install for the install type, and allow for upgrade to run.

D. Re-boot the server and NFS mount thebos images from a local NIM server. Run smit install.

Select Presevation install for the install type, and allow upgrade to run.

Answer: A

QUESTION NO: 69

The output from an oslevel command results in the following warning message: Not all filesets for

61-00-040815_SP were found.Which command will display the filesets that are missing from this

service pack?

A. lslpp -l |grep 'SP'

B. lslpp -i 61-00-040815_SP

C. instfix -icqv |grep ':-:'

D. instfix -l 61-00-040815_SP

Answer: C

QUESTION NO: 70



Actu

alTe

sts.

com

Which LPP status signifies the inability to return to a previous version of a fileset because the

saved files have been removed?

A. APPLIED

B. REMOVED

C. REJECTED

D. COMMITTED

Answer: D

QUESTION NO: 71

Which tool validates firmware and HMC compatibility for a proposed AIX upgrade?

A. SPT

B. LVT

C. FLRT

D. SSIC

Answer: C

QUESTION NO: 72

Where can the Open Source prerequisite filesets that allow the installation of the Firefox Web

browser be found?

A. Fix Central

B. IBM AIX Toolbox

C. AIX Expansion Pack

D. Common base AIX CDs

Answer: B

QUESTION NO: 73

Which command is used to initialize and configure a NIM master?

A. /usr/sbin/nim_init

B. /usr/bin/installnim

C. /usr/sbin/nimconfig

D. /usr/sbin/setup_server



Actu

alTe

sts.

com

Answer: C

QUESTION NO: 74

An administrator is defining an lpp_source calledlpp_AIX6 in NIM when the following warning

message is displayed in the output:warning: 0042-267 c_mk_lpp_source: The defined lpp_source

does not have the 'simages' attribute because one or more of the following packages are missing:

Bos bos.net bos.diag bos.sysmgtbos.terminfo bos.terminfo.all.data bos.mp64 devices.common

bos.64bit What does this warning message mean?

A. The lpp_AIX6 is not a validlpp_source NIM resource.

B. The lpp_AIX6 can be used in NIM BOS operations to install AIX only on standalone clients.

C. The lpp_AIX6 can be used in NIM CUST operations to install software on SPOTs and running

machines.

D. The lpp_AIX6 does not contain all of the required software packages for NIM CUST

installationoperations.WArialCourier NewTimes New RomanZ

Answer: C

QUESTION NO: 75

Refer to the following output:

The current permanent system firmware image is EM340_041 The current temporary system

firmware image is EM340_075The system is currently booted from the temporary firmware image.

Which command will display similar information?

A. lsmcode

B. diag -S 1

C. prtconf | grep firmware image

D. invscout -vf [Server system name]

Answer: A

QUESTION NO: 76

Which describes the operation required to move to anew release level of system firmware?

A. Deferred

B. Transient

C. Concurrent



Actu

alTe

sts.

com

D. Disruptive

Answer: D

QUESTION NO: 77

An administrator needs to apply a Technology Level update. During the preview install, the output

indicates that there is insufficientspace in the /usr filesystem. Review of the root volume group

indicates there are no available physical partitions, but the /test jfs2 filesystem is only 8% used.

What is the most efficient method to use the available space in the /test filesystem to apply

theupdate?

A. Usechfs to reduce the /test filesystem

B. Usecplv to copy the /test filesystem to a smaller logical volume

C. Usemigratepv l to move the /test filesystem to a different volume group

D. Backup the /testfilesystem, remove it, and recreate it with a smaller size

Answer: A

QUESTION NO: 78

How can an administrator verify that the disk is stillusable when the output of 'lspv' shows 'hdisk1'

is in a missing state?

A. lspv -l hdisk1

B. lscfg -l hdisk1

C. lsattr -l hdisk1

D. dd if=/dev/hdisk1 bs=512k count=10 of=/tmp/disk.txt

Answer: D

QUESTION NO: 79

Which of the following explains the relationship between a physical and logical partition?

A. A physical partition is hosted on one or more logical partitions. A logical partition is used when

describing storage.

B. A logical partition is hosted on one or more physical partitions. A physical partition is used when

describing storage.

C. A physical partition is used when describing only a SCSI or SAS disk. A logical partition is used

when describing a SAN LUN.



Actu

alTe

sts.

com

D. A logical partition is used when describing only a SATA or SAS disk. A physical partition is used

when describing RAID or mirrored arrays.

Answer: B

QUESTION NO: 80

A system has a mirrored data volume group that has a filesystem /data of 10 logical partitions.

How many physical partitions will thefilesystem have?

A. 1

B. 2

C. 10

D. 20

Answer: D

QUESTION NO: 81

What must an administrator do to create two new volume groups on a system with only one spare

disk?

A. Run the 'mkvg -M' command to create multiple volume groups on a single disk.

B. Add a new disk to the system or release a disk from the one of the existing volume groups.

C. Run the 'mkvg' command to create multiple volume groups on a single disk providing the disk

does not have a PVID.

D. Run the 'mkvg' command to create multiple volume groups on a single disk providing the

volume groups have the same PP size.

Answer: B

QUESTION NO: 82

The 'lsvg -o' command is run with an output of only rootvg, but the server has another volume

group named datavg, which is notdisplayed. What is the likely cause?

A. datavg is in an offline state.

B. 'lsvg -o' only displays the root volume group.

C. 'lsvg -o' only displays the fist volume group.

D. datavg has no filesystems and therefore, is inactive.



Actu

alTe

sts.

com

Answer: A

QUESTION NO: 83

An administrator wants to mirror an importantfilesystem between two disks without mirroring the

entire volume group. Which command should be used?

A. cplv

B. mirrorvg

C. mklvcopy

D. migratelv

Answer: C

QUESTION NO: 84

The server host1 has been set up as a backup system with the following /etc/exports:

/backups -rw How can a second server regularly use this disk space?

A. /usr/sbin/mkfs -s 8G -o nbpi=2048,frag=512 /dev/lv00 -b -l host1

B. /usr/sbin/crnfsmnt -d /backups -l /backups host1 -R -X -v -S -b bg

C. /usr/sbin/mknfsmnt -f /backups -d /backups -h host1 -a -S -t rw -w bg -g

D. /usr/sbin/crfs -v nfs -g vg1 -A yes -p rw -m /backups -a logname=/dev/lv00

Answer: C

QUESTION NO: 85

A log logical volume is created as indicated below: root@host1:/# mklv -a c -t jfs2log -b y datavg 1

loglv00 root@host1:/# lsvg -l datavg datavg: LV NAMETYPELPsPPsPVsLV STATE MOUNT

POINT loglv00jfs2log111closed/syncdN/AA new filesytem is then created using the new log logical

volume. When the administrator attempts to mount the filesytem, the following error

occurs:root@host1:/# mount /newfs mount: 0506-324 Cannot mount /dev/lv00 on /newfs:

A system call received a parameter that is not valid. Which of the following actions will resolve this

error?

A. Recreate the file system with -prw flags and re-mount.

B. Run 'logform /dev/loglv00' and hit 'y' to destroy all data.

C. Run 'clrginfo -p' to clear the invalid filesystem parameter.

D. Change 'account = true' value in /etc/filesystem to 'account = false'.



Actu

alTe

sts.

com

Answer: B

QUESTION NO: 86

Files /tmp/file2 and /tmp/file3 are hard linked to /tmp/file1. What will the result be if a user makes

changes to /tmp/file2 at the same time another user tries to delete /tmp/file1?

A. All three files will contain the updates and will remain available.

B. All three files will be deleted and no changes will be made to /tmp/file2.

C. Only /tmp/file2 will contain the updates, but /tmp/file3 will remain available.

D. Both /tmp/file2 and /tmp/file3 will contain the updates and will remain available.

Answer: D

QUESTION NO: 87

LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers.

Which command will validate that both storage paths are available?

A. lspath

B. sdd query adapter

C. pcmpath query adapter

D. datapath query device

Answer: A

QUESTION NO: 88

Which command will check the errorlog size?

A. lssrc -s errord

B. errorlog -histsize

C. /usr/lib/errdemon -l

D. ls -l /var/adm/ras/errlog

Answer: C

QUESTION NO: 89

Which command will display messages directed to the system console?



Actu

alTe

sts.

com

A. alog -t console -o

B. cat /var/adm/ras/conslog

C. cat /var/log/all/console.log

D. grep CONSOLE /var/adm/messages

Answer: A

QUESTION NO: 90

Which command must be run to log a hardware repair entry in the errorlog?

A. diag

B. cfgmgr

C. errlog

D. errlogger

Answer: A

QUESTION NO: 91

An administrator suspects problems on a SCSI hard disk, but upon running diagnostics, no errors

were found. What must be done to check the condition of the drive?

A. Rundiag and select the 'Certify Media' task.

B. Perform a read and write test on the disk and monitorerrorlog.

C. Update the disk firmware to the latest level and monitorerrorlog.

D. Format the disk to ensure bad blocks are omitted from the disk layout.

Answer: A

QUESTION NO: 92

Which command will debug the AIX kernel?

A. kdb

B. snap

C. truss

D. trace

Answer: A



Actu

alTe

sts.

com

QUESTION NO: 93

Which command will determine if the Trusted Computer Base is enabled on a system?

A. getrunmode

B. getsecconf

C. tcbck -display

D. odmget -q attribute=TCB_STATE PdAt

Answer: D

QUESTION NO: 94

Which command will list ODM class descriptions to provide the format needed to create a new

class?

A. odmadd

B. odmget

C. odmshow

D. odmcreate

Answer: C

QUESTION NO: 95

Which command shows dump components and controls live dump attributes?

A. dumpctrl

B. sysdumpdev

C. livedumpdev

D. livedumpctrl

Answer: B

QUESTION NO: 96

Which command will retrieve /unix and dump fromthe dump device?

A. snap -R

B. snap -D

C. snap -U

D. snap -N



Actu

alTe

sts.

com

Answer: B

QUESTION NO: 97

An application writes to a log file in the /logs filesystem that is full. After the log file is deleted, 'df'

still shows the filesystem as 100% full. What is the likely cause of the problem and what will

resolve it?

A. The deleted file is still open by the application. The system must be rebootedbefore'df' will show

the reduction in the filesystem.

B. The deleted file is still open by the application. The application must bestoppedbefore 'df' will

show the reduction in the filesystem.

C. Thefilesystem is still marked as full in the /etc/fs.status file. The system must be rebooted

before 'df' will show the reduction in the filesystem.

D. Thefilesystem is still marked as full in the /etc/fs.status file. The application must be stopped

before 'df' will show the reduction in the filesystem.

Answer: B

QUESTION NO: 98

A booting system appears to be hanging with an LED code of 0c54. What is the likely cause?

A. An AIX install is in progress.

B. Therootvg volume group is corrupt.

C. The TCPIP configuration is incorrect.

D. At least one paging device cannot be varied on.

Answer: A

QUESTION NO: 99

An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?

A. varyon of the paging device failed.

B. fsck of the root (/) filesystem failed.

C. varyon of the root volume group failed.

D. IPL device could not be opened or a read failed.

Answer: C



Actu

alTe

sts.

com

QUESTION NO: 100

An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with

reference code 0c31. What is the most likely cause?

A. The system is waiting for user input to define console type lft0.

B. The system is waiting for user input to define console type tty0.

C. The system is waiting for user input to define console type vty0.

D. The system is waiting for user input to define console type vsa0.

Answer: C

QUESTION NO: 101

NIM fails to successfully network-boot an LPAR and install AIX. The administrator wants to first

rule out network configuration or routing to be the cause. Which sequence of steps can be

employed to debug the network-boot process?

A. 1. Comment out thebootps entry from the /etc/inetd.conf file on the LPAR.

2. Stop all running processes.

3. Restart inetd using the 'refresh -s inetd' command.

4. Flush the ARP table on the NIM master.

5. Initiate the network boot of the LPAR.

B. 1. Comment out thebootps entry from the /etc/inetd.conf file on the NIM master.

2. Stop all running bootpd processes.


4. Start bootpd from the command line : /usr/sbin/bootpd -s -d -d -d'


C. 1. Comment out thebootps entry from the /etc/inetd.conf file on the NIM master.



4. Start bootpd from the command line : /usr/sbin/bootpd -g nfs -d -d d


D. 1. Comment out thebootps entry from the /etc/inetd.conf file on the NIM master.


3. Restart the effected daemons using the '/etc/rc.tcpip' command.

4. Start bootpd from the command line : '/usr/sbin/bootpd -s -d -d -d'


Answer: B



Actu

alTe

sts.

com

QUESTION NO: 102

What can be done to enable the debug information for functions to be displayed when using 'ksh -

x' to debug a script?

A. Run the script using 'ksh -fx'.

B. Run the script using 'ksh -a function -x'.

C. Edit the script and add 'set -x' at the beginning.

D. Edit the script and add 'set -x' at the beginning of each function.

Answer: D

QUESTION NO: 103

Which command synchronizes or rebuilds the logical volume control block, the device

configuration database, and the volume group descriptor areas on the physical volumes?

A. syncvg rootvg

B. synclvm rootvg

C. varyonvg rootvg

D. synclvodm rootvg

Answer: D

QUESTION NO: 104

An administrator is attempting to recover afilesystem that fails to manually unmount. The fsck

command produces the following output: The current volume is: /dev/fslv02 File system is

currently mounted. Invalid file system size in the primary superblock. Invalid file system size in the

secondary superblock. Primary superblock is corrupt. Secondary superblock is corrupt. fsck:

0507-018 Superblock is corrupt and cannot be repaired. Both primary and secondary copies are

corrupt. Cannot continue tried to mount Which steps will resolve the problem?

A. Reboot the server into maintenance mode and run 'fsck' with the '-p' parameter while the

filesystem is mounted.

B. Reboot the server into maintenance mode and run 'fsck' with the '-y' parameter whilethe

filesystem is unmounted.

C. Forcea umount of the filesystem with 'umount -F /dev/fslv02', and then run 'fsck -p /dev/fslv02'

while the filesystem is unmounted.

D. Forcea umount of the filesystem by varying off the hosting volume group and then varyon the

volume group. This will permit 'fsck -y' to be run against the failing filesystem.



Actu

alTe

sts.

com

Answer: B

QUESTION NO: 105

The 'fsck -p /dev/lv00' command returned thefollowing message: Not a recognized filesystem type

What is the likely cause of the problem and how should it be resolved?

A. The file system superblock is dirty. It can be replaced from the VGDA.

B. The logical volume superblock is dirty. It can be replaced from the VGDA.

C. The file system superblock is dirty. It can be replaced from the secondary copy.

D. The logical volume superblock is dirty. It can be replaced from the secondary copy.

Answer: C

QUESTION NO: 106

Which command will list all subsystem resources on a server?

A. lssrc a

B. lssrc g

C. lssrc l

D. lssrc -s

Answer: A

QUESTION NO: 107

Which command starts Workload Manager?

A. wlmrun

B. wlmstart

C. wlmcntrl

D. wlmstartup

Answer: C

QUESTION NO: 108

Where is the run date for an 'at' job located?



Actu

alTe

sts.

com

A. Within the job environment set up

B. Within the user data of the at job

C. In the file namepreceeded with a userid

D. In a special file used by thecron daemon

Answer: A

QUESTION NO: 109

Which of the following can an operator use to shutdown a system into single-user mode?

A. shutdown -d

B. shutdown -s

C. shutdown -m

D. shutdown -Fr -s 1

Answer: C



000-104

Documents

b question

practice exam question

d question

practice exam answer

lte answer

mb answer

c question

restorevgfiles answer