This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
4.)
3.)
5.)
4.)
49 49
1.) 2.)
47 47
76
11
2 pcs.2 pcs.20
73
2 pcs.2 pcs.
2 pcs.2 pcs.
- LIQUID MASK- LIQUID MASK
Revell scale 1/48 KITThe die-cut mask for accurate canopy frame painting of the
For futher detail sets look for 49 407 F-105G Thunderchief
seat and 48 576 F-105G Thunderchief exterior
(not included in this set)
104
53
70
6767
66
49
45, 58
7460 59
54
46, 64
48
92
88
93
89
94
90
95
91
58
58
101
101
52
82
702 pcs 48
49
47
47
eduard
17
19
16
20
25
29
26
12
11
3
18 15
30
102 pcs
2. Do not inadvertently place etched componets on anunwanted surface. Attempts to remove will result indamage to your part.
2. Nepokládejte samolepící díly na volné plochy. Pokudje omylem přilepíte, při pokusu o odlepení dojde kpoškození dílu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na části dílů, na kterých je naneseno lepidlo.
1. Separate the etched components from their frames on theprotective paper. Removal from the paper is done only afterseparation of the parts from the frames.
1.Samolepící díly oddělujte od rámečku na podkladovémpapíře. Po oddělení je sejměte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepící díly berte za hrany nebo za části, na kterýchnení nanesené lepidlo.
5. Lightly place the component in the desired location andposition. Adjust as required. The component will bypermanently affixed when pressed onto its intendedlocation, its location can be adjusted.
5. Díl lehce položte do pozice, ve které má být nalepen.Upravte přesnou pozici a přimáčkněte. Díl dokonale přilneaž po přimáčknutí, před přimáčknutím lze dílem opatrněmanipulovat.
1/48 scale detail set for Revell kit •sada detailů pro model Revell 1/48