This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Softcopy (=excel-file) of the PHPP-calculation (version 2003 or higher)
Sheet 'Results' of the PHPP-calculation signed by PHPP-calculator
Project layouts with
orientation of the building
buildings close to the building site (implantation and profilel) (only when sheet 'shadow' is filled in)
important trees and other obstructions (only when sheet 'shadow' is filled in)
possible field-profiles for shading by obstruction of the horizon (only when sheet 'shadow' is filled in)
floorplan of every floor
All façade-sides
Minimum 2 cuts where every different height level is visible. In addition a clear representation of all different used wall-, floor- and roofcomposition.
All drawings need to carry clear dimensions necessarry for a fast software-input
Passiefhuis-Platform vzwDe REFLEX voor energiebewust bouwen
Technical chart with efficiencyrate according to PHI (www.passiv.de) or according to EN308 + invoice ventilation-unit
indication on the plan of suction- and blow off-opening to outside
location indication of the ventilation installation
indication earth to air heat exchanger (EAHX) + characteristics (lentgh, diameter, depth) + invoice
Testreport/certificate air tightness of the building shell in accordence with EN 13829, as well as in overpressure and underpressure
Calculation of thermal bridges when there's less then 5cm insulation, with a maximum lamda-value of 0,05W/mK, or equivalent, located and this in all directions
EPB-calculation + signed EPB-report
Possibly other proofs necessary at dataimport in PHPP
Additional for non-residential buildings
as-built plans of the complete installation
As-built plans of HVAC-installations for multi-family houses, schools and offices
As-built plans and studies of lighting in offices and schools;
Studies for special buildings
Passiefhuis-Platform vzwDe REFLEX voor energiebewust bouwen