• Breathing Air Compressors • Cylinder Accountability • Snap in, Auto-Cascade • Confined Space • Custom Packages • Fill Enclosures Quality Products Made in America by Firehouse Systems, Inc. www.firehouse-systems.com
• Breathing Air Compressors
• Cylinder Accountability
• Snap in, Auto-Cascade
• Confined Space
• Custom Packages
• Fill Enclosures
Quality Products
Made in America by
Firehouse Systems, Inc.
www.firehouse-systems.com
When choosing a breathing air compressor for your
department, you want a machine that:
• Delivers pure and consistent quality air
• Is reliable and easy to maintain
• Will fit in the space you have allotted
• Supplies the most CFM for the power you have
• Is simple and safe to use
We’ve engineered our systems to refill SCBA in the
most cost effective, safe and efficient way possible,
saving you thousands in repairs over its long life span.
We didn’t stop there. Our machines are easy to oper-
ate and simple to service. We’ve automated the manu-
al operations that confuse infrequent fillers, making
training quick and simple.
The Panther Line is built on the premise of “Less is More” and “Simple is Better”
Our pumps operate at some of the slowest speeds in the industry. Lower speed pumps last
longer, run cooler and produce less noise and vibration than their high speed counterparts.
The Panther just purrs, as it develops the clean, dry purified air you need for your operations.
Fit your Panther Compressor with the CAT II Cylinder Accountability Tag system and you will
have the simplest , safest and most sophisticated compressor you can buy.
Panther Compressors - Better by Design
Panther Compressors
Simple is Better
45 years of building and supporting Breathing Air Systems taught me two things… Build quality to last a
life time and give your customers more than they expect. Fred Gandolfo, President FHS
Not much larger than a standard fill enclosure, the Pan-
ther is a complete Compressor-Refill Station in a one
piece design that can fit through a standard 36” door.
Its sleek design, clean lines and powder coat finish will
look great on your apparatus floor while taking up less
room than any comparable machine.
The Panther is a big system in a small package. We up-
sized the compressor head to deliver peak performance
while minimizing the wasted space and noise found in
other machines. Slow speed equals long life, less noise.
Don’t settle for low quality, high speed, failure prone
compressors. The compressor you buy is the life line of
your firefighters, demand better, demand Panther.
10 HP Panther Compressor Specifications
Motor: 10 HP 1 or 3 Phase, 208 / 230 or 460 volt
Ventilation: Intake air from rear of machine, discharge air out top
Safe Fill Station Enclosures 2-Postion or 3-Position option
Air Compressor 4-Stage, low speed (1050 RPM), Pressure Lubricated with spin on oil filter and oil pressure gauge. Intercooler
with auto drain, oversized stainless steel aftercooler, 15 Deg F, CTD, Stainless Steel Valves. All Cast Iron Construction Air Compressor Performance: 13.15 ICFM @ 6000 PSI 1050 RPM Optional pressure 7000 PSI
Purifier Rated 7500 PSI, 20,000 SCF @ 60 deg F. Grade E
CO and Dewpoint Monitor Digital Operator Controls Start / Stop / Emergency Stop pushbuttons. Compressor
gauge, Adjustable regulator, Regulated pressure gauge, Fill Valve, SCBA Pres-sure Gauge, Bleed valve
Options CAT II Cylinder Accountability System. UNI or ASME Storage Cylinders (ASME mounts separately) Auto Cascade,
Dimensions: 48.0” Wide x 35.75” Deep* x 71.5” Tall
Shipping weight: Approximately 2000 lbs. Country of Origin: USA Warranty 1-Year on all components.
10 HP Panther All in One Design
10 HP Panther Cub
The Panther Cub is our modular design, compressed
breathing air system. The compressor, Purifier, Motor,
Electric Controls and Monitors are incorporated into
Module 1. Fill Enclosure, Storage Cylinders are sepa-
rate modules and can be purchased as options.
A modular design gives you installation options a one
piece machine does not offer. Plus, as quiet as the Pan-
ther Cub is, you may not want it on the apparatus floor.
The Panther Cub 10 HP Compressor can be ordered in
either 6000 or 7000 PSI. It is designed to fit though a
standard 36” door, so you can slip it in anywhere you
have adequate ventilation.
The Panther Cub is simple by design. Connect one hose
plus the power line and you are ready to refill SCBA and
SCUBA cylinders. It even comes with leveling and vibra-
tion feet for a clean and simple installation.
Panther Compressor Specifications
Motor: 10 HP 1 or 3 Phase, 208 / 230 or 460 volt
Ventilation: Air Intake standard filter or Remote connection
Air Compressor 4-Stage, low speed (1050 RPM), Pressure Lubricated with
spin on oil filter and oil pressure gauge. 3 Stage intercooler with auto drain, oversized stainless steel after cooler, 15 Deg F, CTD, Stainless Steel Valves. All Cast Iron Construction Air Compressor Performance: 13.15 ICFM @ 6000 PSI, 1050 RPM
Optional pressure 7000 PSI
Purifier Rated 7500 PSI, 20,000 SCF @ 60 deg F. Grade E
CO and Dewpoint Monitor Digital Operator Controls Start / Stop / Emergency Stop pushbuttons.
Options CAT II Cylinder Accountability System. 2 or 3 position fill enclosure UNI or ASME Storage Cylinders, Cylinder rack Auto Cascade, Remote Regulated air line
Dimensions: 44.0” Wide x 35.50” Deep* x 56.0” Tall
Shipping weight: Approximately 1500 lbs. Country of Origin: USA Warranty 1-Year on all components.
15 & 20 HP Panther Cub
Our 15 HP and 20 HP Panther Cub are one of the quietest and
vibration free compressors on the market today.
Fitted with an Ingersoll-Rand H15T6, all cast iron, slow speed
compressor block, this machine purrs like a kitten, but performs
like a lion. Hence, the Panther name.
This pump was first developed in 1930 and has changed very
little since. The secret to its success is the overhung crank shaft
design, splash lubrication, simple cartridge valves and low RPM.
This pump has the largest intercooler and aftercooler nest on the
market, assuring only the coolest and driest air enters the purifi-
er extending cartridge life.
This is our premier offering for departments that require large
volumes of air, in a quiet, simple to service, long lasting package.
Available in 15HP and 20 HP
Panther Cub Compressor Specs
Motor: 15 HP 3 Phase, 208 / 230 or 460 volt
Motor: 20 HP, 3 Phase, 208 / 230 or 460 volt
Air Compressor 4-Stage, low speed (850 RPM),
Splash Lubricated. Efficient 3 Stage intercooler with auto drain at each stage. Oversized after cooler, 15 Deg F, CTD, Cartridge Valves. All Cast Iron Construction Air Compressor Performance: 15 HP—21.1 ACFM @ 6000 PSI Air Compressor Performance: 20 HP—25.5 ACFM @ 6000 PSI ACFM = Actual Delivery at discharge, not a calculated figure such as SCFM SCFM and Charge Rates are calculated and not indicative of true performance
Purifier Rated 7500 PSI, 60,000 SCF @ 60 deg F. Grade E
CO and Dewpoint Monitor Digital Operator Controls Start / Stop / Emergency Stop pushbuttons.
Options CAT II Cylinder Accountability System. 2 or 3 position fill enclosure UNI or ASME Storage Cylinders, Cylinder rack Auto Cascade, Remote Regulated air line
Dimensions: 46.5” Wide x 35.50” Deep* x 63.0” Tall
Shipping weight: Approximately 2000 lbs. Country of Origin: USA, Warranty 1-Year on all components.
Fill Enclosures
Panther 3-Position Fill Enclosure–Rated 5500 PSI
Simple to understand Air Control Panel, UL Tested and Listed Enclosure.
Pneumatically assisted door lock, Fills 3-SCBA at one time. Includes:
• Compressor Gauge
• Storage Gauge
• Regulator
• SCBA Fill gauge and bleed valve.
Options: Auxiliary System Pressure Outlet, Independent Pressure air line con-
trols Auto Cascade, Auto Storage Bypass, CAT II System
Dimensions: 40” wide x 34” deep x 57.50” Tall (with extended base)
Panther 2-Position Fill Enclosure—Rated 5500 PSI
Simple to understand Air Control Panel. 3rd party independently tested.
Fills 2-SCBA at one time. Includes:
• Compressor Gauge
• Storage Gauge
• Regulator
• SCBA Fill gauge and bleed valve.
Options: Auxiliary System Pressure Outlet, Independent Pressure air line con-
trols Auto Cascade, Auto Storage Bypass, CAT II System
Dimensions: 30” Wide x 21” Deep x 51.0” tall 670 lbs
Auto Storage Bypass Valve (ASBV) is Standard To keep things simple and efficient, Panther Compressors fill enclosures are fitted with our Auto Storage
Bypass Valve. The ASBV automatically sends purified air where it is needed most.
When filling SCBA, air is first drawn from storage. As storage pressure drops, the compressor starts, send-
ing purified air to refill the storage cylinders. When you continue to fill SCBA, storage cylinders will not
have enough pressure to bring your SCBA cylinders to full pressure. In that event, the ASBV routes air di-
rectly from the compressor/purifier to the SCBA cylinders being refilled until those SCBA are satisfied. Once
the SCBA cylinders are filled to their maximum pressure, the air from the compressor/purifier is automati-
cally routed to storage. This is the most efficient and economical way to refill SCBA while minimizing op-
erator interference and is standard on all Panther Compressors air control panels.
Air control panels are custom and may
not match photo on left.
Air control panels are custom and may
not match photo on left.
Take control of your cylinder refilling with
the CAT II Cylinder Accountability Tag
Tracking System
CAT II
The CAT II is an optical based system and an upgrade from our
original CAT RFID system.
• CAT Tags contain all the required data to safely fill SCBA cylin-
ders, including S/N, Hydro and Expiration Dates
• Cylinders past Hydro, or expired cannot be refilled
• Cylinders will only fill to their rated pressure, regardless of a
higher pressure regulator setting.
• Concise reports: Complete fill records, inventory, hydro due
dates and expiration dates meeting all agency requirements
• Safe, intuitive, simple, one touch operation
• The CAT II System is optional on all Panther Compressors
• Not ready for a new compressor? Install the CAT II on your
existing fill enclosure and compressor.
The CAT II Cylinder Accountability
Tag System puts you in control of
your SCBA refilling compressor.
• Determine who can fill SCBA cylinders
• Determine which cylinders can be refilled
on your equipment
• Protect your department by assuring only
cylinders in hydro & within expiration date
can be refilled
• Protect your personnel from accidental or
intentional over pressurizing of cylinders
• Maintain perfect records and inventory con-
trol with a push of a button
Panther Compressors and the CAT II are proudly manufactured in the USA by:
Firehouse Systems, Inc. Amityville, NY. www.firehouse-systems.com
[email protected] Phone 631-661-7505
Original CAT Circa 2006 CAT II on a RevolveAir CAT Advertisement CAT II on a Mako Fill Enclosure
Confined Space 15 HP Panther Cub Install
Panther Compressors, Builds Custom Systems Need a special breathing air system to fit a specific need? Panther Compressors
can customize a system for most applications.
• Truck compartments, trailers, containerized and special enclosures
• Large volume, higher HP and duplex packages
• Special power requirements, voltage, phase, soft starters and inverters
Call or write with your requirements, let us engineer a system for you.
Dealer
Custom Truck Special Base Plate beginnings Snap in Auto-Cascade