...BACKHOE LOADER ARTICULATED 8.23F Loading bucket (kg) Static tipping load, full turn 4.950 Payload (50%) 2.475 Loading fork (kg) - centre of gravity 500 mm Static tipping load, full

BACKHOE LOADERARTICULATED

8.23F

Loading bucket (kg)

Static tipping load, full turn 4.950Payload (50%) 2.475

Loading fork (kg) - centre of gravity 500 mm

Static tipping load, full turn 3.900Payload EN 474-3 (80%) 3.120Payload EN 474-3 (60%) 2.340Payload DIN 24094 (50%) 1.950

› Max power 106 HP› Bucket capacity 1.1 - 1.4 m3

› Max. digging depth 4.60 m (5.40 m)› Max. permessible weight 8490 kg› Hydrostatic transmission› 4 wheel drive› Stage IIIB / Tier 4i Engine

DIESEL ENGINE

Engine: 4-cylinder in-line, turbocharged, charge air cooling, common Rail injection system electronically controlled, external exhaust gas recirculation, water cooled, dry filtration, oxidation catalyst (DOC).Emissioned according to CEE 97/68 Stage IIIB/Tier 4i.

Type ..................................................Deutz TCD 3.6 L4 Max power. .........................................78 kW - 106 HPRated rpm ....................................................... 2.300Power ISO/TR 14396 ....................... 74,4 kW - 101 HPPower EEC 80/1269 ......................... 74,4 kW - 101 HPMax torque .................................................... 410 NmBore ......................................................... mm 98Stroke ...................................................... mm 120Displacement ............................................. cm3 3.620

ELECTRIC SYSTEM

Battery .................................................................... 12 VoltCapacity EN 60095-1 ...................................110 Ah - 1100 AAlternator rating .......................................................... 95 AReverse warning ................................................... StandardWiring according with ................................. IP 67 DIN 40050

TRANSMISSION

Hydrostatic transmission with automatic power regulation and closed circuit with variable displacement pump and motor. Gearbox with 2 mechanical selections: 2 work speeds (fwd/rev) and 2 road speeds (fwd/rev).Work speed forward reverse1st gear km/h 0÷6 0÷62nd gear km/h 0÷12 0÷12 Road speed1st gear km/h 0÷18 0÷182nd gear km/h 0÷40 0÷40

AXLES

Designed for Heavy Duty. All-wheel drive.Planetary final drives in each wheel.Front axle: rigidRear axle: oscillating up to a total angle of 20° and “Limited Slip” differential. Hydraulic locking device on the rear oscil-lating axle.

BRAKE SYSTEM

Service: multi disk oil brakes on rear axle working on all the wheels.Parking: mechanical brake operating on the transmission shaft manually actuated.

TYRES

Standard ....................................................16/70 - 24Option .................................... 15-22.5 • 405/70 R24

STEERING

Central articulated frame with servo assisted through LOAD SENSING.

Total steering angle ..................................... 80°Inner tyres turning radius ............................. mm 2.500Outer tyres turning radius ........................... mm 4.600Outer bucket turning radius ......................... mm 5.100

HYDRAULIC SYSTEM

Composed of two gear pumps, the first one for the loader circuit and steering, the second one for the circuit of the fan, having a double speed of rotation. “Combined Flow” circuit for feeding the rear control valve.Modular two-element control valve for the loader, modular six-element control valve for the backhoe regenerative type. Double acting hydraulic cylinder. Cylinder 1st backhoe arm with brake at maximum height. Hydraulic oil cooling radiator. Full-flow oil filter on the leakage pipe.

Standard flow .............................................................. lt/1’ 88Max flow ........................................................ lt/1’ 125Loader relief valve pressure ............................. bar 230Steering relief valve pressure ............................ bar 175Lift cylinder ..................................................... mm 85x580Bucket cylinder ............................................... mm 90x402

Loader controlSingle lever arm-control with 4-position lifting system and with 3-position bucket system.

Backhoe controlTwo levers backhoe control, “cloche” type.Two hydraulic-control indipendet stabilizers.Side translation with four hydraulic locking devices.

SERVICE CAPACITIES

Engine ...................................................... lt 8Front axle + Gear box ................................. lt 10,5Rear axle .................................................. lt 9,2Hydraulic circuit .......................................... lt 85Brake system ............................................ lt 0,6Fuel .......................................................... lt 82Water cooling ............................................ lt 24

TECHNICAL FEATURES

Loader:Standard bucket capacity ............................ m3 1,10Bucket width ............................................. mm 2.200Breakout force .......................................... kg 6.900Max. hydraulic lifting capacity at maximum height .... kg 4.100Dump angle ................................................ mm 3.350Dump height at 40° ..................................... mm 2.700Reach at 40° .............................................. mm 800

Backhoe loaderType ................................................................. VF 4.35CStandard bucket capacity .................................. lt 150Bucket width ...................................................mm 500Dipperstick max penetration capacity ................. kg 2.550Max breakout force on the bucket tipe ................. kg 4.560Lifting capacity on the bucket pin up to max height .... kg 1.400Rotating ........................................................... 180°A - Max digging depth ....................................... mm 4.600B - Standard digging depth (SAE) ......................... mm 4.300C - Max digging depth with telescopic (opt.) ................ mm 5.400D - Standard digging depth with telescopic (opt) ........... mm 5.100

DIMENSIONS AND WEIGHT

Max lenght in transfer position .......................... mm 5.900Max width in transfer position ............................ mm 2.200Width across tyre ............................................. mm 2.060Tracks width ..................................................... mm 1.650Maximum height ............................................... mm 3.500Ground clearance .............................................. mm 320Standard weight in running order ........................ kg 7.500Max permissible weight ..................................... kg 8.490

Via Piratello, 106 - 48022 Lugo (RA) ITALYTel. +39 0545 904411 Fax +39 0545 30389e-mail: [email protected] www.vf-venieri.comSpare PartsTel. +39 0545 904429 Fax +39 0545 24555

The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding. Venieri reserves the right of carryng out possible changes at any time and without previous notice because of its policy of steady devalopement and improvement(2015) UP 546A