Пневматические сеялки

7550 SERIES II AIR DRILLS

3 SECTION & 5 SECTION

48’ (14.6m) 7550 Series II c/w 4400 Air Seeder Cart

37’ (11.3m) 7550 Series II

c/w 3215 Air Seeder Cart

Ezee-On 7550 Series II Air Drills

1. Accuracy: If there is one thing we have learned af-ter 50+ years in the tillage business it is that producers demand maximum accuracy when choosing a seeding or planting tool, because results in the field are what matter. Ezee-On Air Drills have been engineered from the ground up to be pinpoint accurate in a wide range of field conditions. Current Ezee-On Air Drill owners continually report consistent seed depth, better germination and smooth field finish year after year.2. Simplicity: Ezee-On understands time is valuable in today’s fast-paced world. So when we get a chance to im-prove our equipment, simplicity is on the top of our list every time. Ezee-On Drills are simple to set, simple to adjust and simple to operate.3. Dependability: Ezee-On Air Drills are designed to per-form and built to last. These Drills are rugged units that through innovative engineering provide outstanding seeding performance, yet are simple and reliable for years of trouble-free operation.

Narrow Contour Depth: Seed placement accuracy is dependent on the Air Drill’s ability to follow the ground contour. Ezee-On Air Drill’s shallow contour depth provides unbeat-able land hugging characteristics, even in rolling terrain.

COMMON PERFORMANCE FEATURES

Results Matter

Single Cylinder Depth Control Positive Mechanical Depth Stops In-Frame Casters

Single cylinder depth control guarantees more accurate seed placement than series cylinders commonly used by competi-tors. This is achieved by eliminating the leakage that occurs between hydraulic cylinders in series, which constantly need rephasing. The result is dependable accuracy in the field – where it counts.

To ensure the seeding depth doesn’t change while working, Ezee-On uses positive mechanical depth stops that clip onto the single depth-control cylinder, conveniently located at the front of the machine. With cylinder adjustments in 1/8” (3mm) increments, operators are able to set the Air Drill for precise seeding results every time.

Ezee-On places all front caster wheels inside the first row of the Drill’s frame. This enables the Air Drill to follow un-even ground very accurately because it shortens the contour depth. Large 11L and 12.5L tires are standard in order to offer maximum floatation. (see Specification Chart)

3-Section Air Drills• For small to mid-sized operations, Ezee-On offers an Air Drill with a wealth of features and value that will suit any farming style. Available in 28’, 33’, 37’ and 40’ (8.5, 10.1, 11.3 and 12.2m) sizes.• A variety of options are available that allow producers to customize the Air Drill to their operation or particular farming practices.• Single cylinder depth control is standard - ensuring maximum accuracy.• 8”, 10” or 12” (203, 254 or 305mm) spacing* is available with the choice of 350 lb or 550 lb (159 or 250 kg) trips.* 12¼” (311mm) for the 40’ (12.2m) size.• 3” or 5” (76 or 127mm) semi-pneumatic rubber or 3.5” or 5” (89 or 127mm) steel packers are available to accommodate a wide variety of openers & soil types.• Whatever configuration you choose, you will be impressed by the simplicity, performance and durability of your Ezee-On Air Drill.

48’ (14.6m) 7550 Series II

c/w 4400 Air Seeder Cart

COMMON PERFORMANCE FEATURES

Flex-Wing Hinge

Fixed Hinge

Flex-Wing Hinge

In-Frame Casters Flex-Wing Hinges Walking Beam Packer Gangs Front/Rear Leveling

Ezee-On places all front caster wheels inside the first row of the Drill’s frame. This enables the Air Drill to follow un-even ground very accurately because it shortens the contour depth. Large 11L and 12.5L tires are standard in order to offer maximum floatation. (see Specification Chart)

Producers demand flexibility in the field. Ezee-On has per-fected a flex-wing hinge system that gives the fore/aft travel needed to follow the ground and reduce torsional stress without any maintenance required. The fixed hinge on the second row of each section provides weight transfer from frame to frame to ensure proper depth penetration from each section.

Packer wheels are sometimes required to roll over rocks, stumps, etc in the field. Ezee-On’s walking beam design pro-vides positive packing pressure by allowing individual gangs to roll over obstructions without affecting its adjacent gang.

Front-to-rear leveling on a Series II Drill is simple as 1.2.3. 1. Remove quick-pin. 2. Extend or contract pusharm by turn-ing clockwise or counter clockwise. 3. Reinstall quick pin. Note: extending the pusharm will raise and contracting will lower the rear of the Air Drill.

Side to side wing leveling is also simple as 1.2.3. 1. Loosen jam nut. 2. Extend or contract quick wing leveler by turning shaft. 3. Tighten jam nut. Note: extending will raise and contracting will lower the side of the wing.

3-Section Air Drills• For small to mid-sized operations, Ezee-On offers an Air Drill with a wealth of features and value that will suit any farming style. Available in 28’, 33’, 37’ and 40’ (8.5, 10.1, 11.3 and 12.2m) sizes.• A variety of options are available that allow producers to customize the Air Drill to their operation or particular farming practices.• Single cylinder depth control is standard - ensuring maximum accuracy.• 8”, 10” or 12” (203, 254 or 305mm) spacing* is available with the choice of 350 lb or 550 lb (159 or 250 kg) trips.* 12¼” (311mm) for the 40’ (12.2m) size.• 3” or 5” (76 or 127mm) semi-pneumatic rubber or 3.5” or 5” (89 or 127mm) steel packers are available to accommodate a wide variety of openers & soil types.• Whatever configuration you choose, you will be impressed by the simplicity, performance and durability of your Ezee-On Air Drill.

7550 Series II Air Drill | 3 Section Frame

5-Section Air Drills• Widths: 48’, 56’, or 60’ (14.6, 17.1 or 18.3m). Ezee-On Air Drills offer maxi- mum productivity and results for larger operators looking to cover more acres in less time.• Pin-point seeding depth accuracy is achieved with Ezee-On’s single cylinder depth control.• A massive 5½” x 16” (140 x 406mm) cylinder is used with a 5½” (140mm) double walled main frame rockshaft to maintain structural integrity and ensure precise seeding depth is achieved.• Flex-wing hinges are designed into all five frame sections to provide excellent ground-following ability, even in the most challenging field conditions.• 7550 Series II Drills are engineered for simplicity: quick-wing levelers and packer pusharms allow operators to adjust the Drill in three easy steps.

48’ (14.6m) 7550 Series II

c/w 4400 Air Seeder Cart

Quick Wing Levelers Frame Shank Assembly

Side to side wing leveling is also simple as 1.2.3. 1. Loosen jam nut. 2. Extend or contract quick wing leveler by turning shaft. 3. Tighten jam nut. Note: extending will raise and contracting will lower the side of the wing.

Moving trash residue through the frame without plugging can be challenging for competitive 4-row frame Air Drills. 7550 Series II Drills have a fully welded 5-row frame design that ensures no two shanks are placed closely on the same row, or front to back, leaving smooth field finish.

The heart of Ezee-On’s rugged spring cushion shank is the 3.5” (89mm) full width nylon-graphite bushing. Self lubricat-ing, these bushings have a long service life with no main-tenance required. Shank assemblies, (pre-assembled at the factory), have dual springs with a choice of 350 lb (159kg) or 550 lb (250kg) initial breakout force.

7550 Series II Air Drill | 5 Section Frame

5-Section Air Drills• Widths: 48’, 56’, or 60’ (14.6, 17.1 or 18.3m). Ezee-On Air Drills offer maxi- mum productivity and results for larger operators looking to cover more acres in less time.• Pin-point seeding depth accuracy is achieved with Ezee-On’s single cylinder depth control.• A massive 5½” x 16” (140 x 406mm) cylinder is used with a 5½” (140mm) double walled main frame rockshaft to maintain structural integrity and ensure precise seeding depth is achieved.• Flex-wing hinges are designed into all five frame sections to provide excellent ground-following ability, even in the most challenging field conditions.• 7550 Series II Drills are engineered for simplicity: quick-wing levelers and packer pusharms allow operators to adjust the Drill in three easy steps.

Common Performance Features

Central Grease BanksFor producers looking for the ultimate in quick and easy maintenance, Ezee-On offers central grease banks located at the front of the Air Drill. High pressure grease hose leads to each rockshaft bearing located in the middle of the frame. Available in 2007.

Packer ChoicesWhatever your soil type or opener style, Ezee-On has a packer wheel that will be a perfect match. Semi-pneumatic rubber will flex and shed wet, sticky soil. Ezee-On’s steel packers, with industry leading ¼” (6mm) face, are better suited to rocky conditions.

Under Frame Clearance Automatic Transport Lock Lock-Out ValvesLocated at the front of the drill, these lock-out valves ensure safer transportation. Should the opera-tor accidentally move a hydraulic lever, the wings will not unfold and the Drill will not lower when these valves are in the locked position.

In transport, both front casters and rear transport wheels are automatically locked with Ezee-On’s over-center, mechanical linkages. Hydraulic pressure un-locks the Drill from the transport position.

Underframe clearance is an important part of any Air Drill’s performance. Ezee-On offers 35” (889mm) of opener to frame clearance allowing trash to flow through the Drill with ease. 46” (1.2m) of clearance is achieved when the Drill is lifted completely.

Options

In-Frame Harrows Ezee-On’s optional 2-row in-frame harrows provide a more level field finish and better seed-to-soil contact. Operators can adjust the angle and down pressure of the 16” (406mm) tines to match vary-ing field conditions. Note: Requires changing shank con-figuration from 5 rows to 4 rows.

End Shank GaugesEconomical End Shank Gauges provide visual indication of the Drill’s field position and can help prevent costly overlaps. They are fully adjustable and offer spring breakaway protection against impact. Available on all Ezee-On Drills except 28’ (8.5m).

Walking Front CastersTo increase floatation, mainframe dual caster wheels are standard equipment on 40’ (12.2m) and larger Drills, and optional on all smaller 3-section Drills. Further-more, the smallest tire Ezee-On supplies on the 7550 is an 11L, most competitors use smaller 9.5L tires.

Rock Deflectors / Mud Scrapers Rock deflectors are available to prevent rocks or stumps from lodging between packer wheels. Steel packers have adjustable, hardened mud scrapers avail-able to strip off mud and ensure consistent packer performance.

Seed BootsFor producers wanting to single shoot, Ezee-On offers four seed boot choices with varying spread patterns. A wide variety of aftermarket double shoot openers are available from your dealer to fit Ezee-On Air Drills.

FOR SHANKS WITH 1¾” HOLE SPACING40T BOOT 40TS BOOT 40TSS BOOT M1 BOOT

2” – 2 ½”Ideal for seeding

or banding

2” – 2 ½”Designed for

use withspoon and in-row packers

3” – 3 ½”Ideal for

seeding with3” spoon or 11” sweep

5” – 7”Ideal for seeding

with sweep

1”

MODEL 7550 SERIES II AIR DRILL SPECIFICATIONSFrame Design: 5 Rows (ensures no two shanks are placed closely side by side for optimum trash clearance); 4” x 4” (102x102mm) SteelFrame Depth: 98” (2.5m) from center of first row to center of rear row. (ensures no 2 shanks are placed closely front to back)Under Frame Clearance: 35” (889mm) with double shoot opener (optimum trash flow and excellent clearance under the toolbar)Road Clearance: 14” (356mm) without ground engaging toolsDepth Control: Single Cylinder rotates rockshafts to raise or lower the entire Air Drill. 5” x 12” (127 x 305mm) on a 3 section and 5.5” x 16” (140 x 406mm) on

a 5 section. Positive mechanical depth stop segments control depth cylinder in 1/8” (3mm) increments. Flexibility: 14.5 degrees up, 8 degrees down

Fore-aft flexibility with a fixed hinge in the center to allow weight transfer from frame to frameContour Depth:working @ 1” (25mm)

138” (3.5m) c/w Single Front Casters148” (3.8m) c/w Dual Walking Casters

Shanks: (Initial Trip Force)

350lbs (159kg) = 7/8” x 2” (22 x 51mm) Dual Spring Cushion Shank 47 degree “C” style shank550lbs (250kg) = 1” x 2” (25 x 51mm) Dual Spring Cushion Shank Mounted with 5/8” (16mm) High-Tensile Strength U-Bolts

Shank Pivot Bushing: 3½” (89mm) wide Nylon-Graphite (self-lubricating) Packer Choices: 8”(203mm) spacing: 3”(76mm) Rubber; 3½”(89mm) Steel Note: All Steel Packers feature ¼” (6mm) cap

10”(254mm) or 12”(305mm) spacing: 3” or 5”(76 or 127mm) Rubber; 3½” or 5”(89 x 127mm) Steel

OPTIONS

Rock Deflectors: Prevents rocks from lodging between packer wheelsMud Scrapers: Keeps steel packer wheels free from mud build up; adjustable to accommodate wearDistribution System: Primary Runs 4/8, 6/12, 8/16: 2½” (64mm) Hose Secondary Runs: 1” (25mm) I.D Hose Harrows: In-frame 2 bar harrows (4-Row configuration); or shank mounted harrows installed on rear rankSafety Lights /Chain: Available for all sizesDual Walking Casters: Provides additional floatation in soft ground conditions. Optional on main frame for 28’, 33’ or 37’ (8.5, 10.1, 11.3m) sizes. Standard on 40’

(12.2m) & all 5 Section DrillsShank Lowering Kit Lower shanks ¼”, ½” or ¾” (6, 13 or 19mm)

3 Plex Frame 5 Plex FrameBasic Size 28’ (8.5m) 33’ (10.1m) 37’ (11.3m) 40’ (12.2m) 48’ (14.6m) 56’ (17.1m) 60’ (18.3m)Field Width 8” (203mm) Spacing 28’0” (8.5m) 33’4” (10.2m) 37’4” (11.4m) 40’0” (12.2m) 49’4” (15.0m) 56’0” (17.1m) 60’0” (18.3m) 10” (254mm) Spacing 28’4” (8.6m) 33’4” (10.2m) 36’8” (11.2m) 40’0” (12.2m) 48’4” (14.7m) 56’8” (17.3m) 60’0” (18.3m) 12” (305mm) Spacing 28’0” (8.5m) 34’0” (10.4m) 38’0” (11.6m) - - - - 12¼” (311mm) Spacing - - - 40’10” (12.4m) 49’0” (14.9m) 55’2” (16.8m) 59’3” (18.1m)Frame Width Main 13’6” (4.1m) 13’6” (4.1m) 13’6” (4.1m) 16’ (4.9m) 16’ (4.9m) 16’ (4.9m) 16’ (4.9m) Wing 8’ (2.4m) 10’ (3.0m) 10’ (3.0m) 12’ (3.7m) 10’ (3.0m) 13’ (4.0m) 13’ (4.0m) Outer Wing - - - - 6’ (1.8m) 6’ (1.8m) 6’ (1.8m)Transport (Approximate) Width 17’10” (5.4m) 17’10” (5.4m) 17’10” (5.4m) 20’6” (6.2m) 20’9” (6.3m) 20’9” (6.3m) 20’9” (6.3m) Height 12’8” (3.9m) 14’8” (4.5m) 16’8” (5.1m) 17’8” (5.4m) 14’4” (4.4m) 17’9” (5.4m) 17’9” (5.4m)Tires (All tires are Farm / Highway Service - ‘FI’) Main 12.5Lx15 (2)* 12.5Lx15 (2)* 12.5Lx15 (2)* 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) Wing 11Lx15 (1) 11Lx15 (1) 11Lx15 (1) 11Lx15 (1) 11Lx15 (1) 11Lx15 (2) 11Lx15 (2) Outer Wing - - - - 11Lx15 (1) 11Lx15 (1) 11Lx15 (1) Transport 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) 11Lx15 (4) *Dual Walking Casters Optional: 11Lx15 (4) in lieu of standard configurationWeight (Approximate) 10” (254mm) spacing c/w 3” (76mm) rubber

16,118 lbs. (7,311kg)

17,364 lbs. (7,876kg)

18,114 lbs. (8,217kg)

23,764 lbs. (10,779kg)

26,861 lbs. (12,184kg)

28,749 lbs. (13,041kg)

29,157 lbs. (13,226kg)

HEAD OFFICE: CANADAEZEE-ON Manufacturing5110 - 62ND Street Vegreville, Alberta T9C 1N6Tel: (780) 632-2126 Fax: (780) 632-6221www.ezeeon.com

U.S.A.EZEE-ON Manufacturing1125 Maggie Lane, Unit B Billings, Montana 59101Tel: (406) 245-3109 Fax: (406) 259-4527

DEALER

Continuing product improvement is a goal of Ezee-On Manufacturing, therefore the Company reserves the right to make any changes in design, materials and/or specifications without notice and without liability. Specifica-tions are applicable to products manufactured for sale in North America and may vary outside this area.

PRINTED IN CANADA

*All metric figures are in kilograms, meters, or millimeters.