Gravimetric dosing system that does not require a space around a molding machine Features No separation due to conveying. Saving space; Compact and lightweight. No separation; Direct mount on the machine. Reducing Master batch. No over dosing; Continuos and accurate dosing. Save labor, time and resin at the color change. Quick change hopper. Simply color change. Color change in 60 sec. Accurate blending. Resin and color flow together at the same; Inline dosing and Dosing cylinder®. Iess pulsation, stable and accurate material supply by screwless dosing cylinder®. The self-control function is built-in This machine will drive calcuates the optimum mixture ratio automatically depending on the amount of crushed material. JCLW Gravimetric Loss in Weight Feeder Mixing Points Max. Measuring Capacity ᡂ型ᶵ࿘㎶ス䝨䞊スせ䛾 ᶵ䝍䜲䝥䛾㉁㔞ᘧ配合装置 ≉㛗 材料のムダを↓くします。 Saving color comsumption JCLW は 輸送による材料ศ㞳がありません䟿 成形機上設置専用設計のため、┬ス䝨ース、ᑠ型、㍍量です。 機上で計量䞉配合するため、輸送による材料のศ㞳がありません。 MB材の使用量を๐減䟿 ᚑ来のMB材ῧ加量は、Ⰽムラを気にして、バラツ䜻の下㝈で配合 ⋡をỴめていました。 JCLWは、連続してṇ☜な供給が能なため、㎾計量のバラツ䜻 によりロスしていたMB材のムダが๐減できます䟿 材料替え時のᡭ間䠋時間䠋材料のムダも減䟿 材料ホッパーはワンタッチで⬺╔能䟿 ᵓ㐀がシンプルなので、材料替えが⡆༢です。 60⛊でΎがします。 材料配合がṇ☜です䟿 専用設計のシリンダーによる材料の安定供給とドージングシステム で主材とMB材を配合するため、どこで切っても配合比にムラがあり ません。 ドージングシリンダーにはスクリュ⩚᰿ が↓いため、⬦動がᑡなく、 安定してṇ☜な材料供給が⾜えます。 セル䝣䝁ン䝖ロール機能ᦚ㍕ 粉砕材の量にᛂじて自動で最㐺な配合比⋡を₇算し㐠転します。 質量減算式配合装置 配合点数 2〜3 最大計量能力 〜18 0 㼗㼓/㼔 110 ●粉砕材計量 ●Regrind material measuring 㻴T䝰ータ䠇スクリュ䝣䜱ーダーの組合わせ。 Measure regrind material by the combination of screw feeder and high torque motor. ●䝛ッ䝖ワークᑐᛂ ●Networking 䝛ッ䝖ワーク᥋続により、リアルタイムで ရ質管理が䛚こなえます。 Real time quality control by LAN communication. ●MB材計量 ●MB material measuring LT䝰ータ䠇ドージングシリンダ (スクリュ䝣䜱ーダー)の組合せ。 Measure MB material by the combination of screw feeder and row torque motor. ▲JCLWの計量供給部 M JCLW Neck piece part 粉砕材 Regrind material MB材 Master batch material 0% 0% 3% 3% 20% 20% 2.4% 2.4% 15% 15% 2.55% 2.55% 成形㛤ጞ時 The start of molding 連続㐠転中 Continuous operation 連続㐠転中 Continuous operation 連続㐠転にకい粉砕材のⓎ⏕量をᢕᥱし、 自動で配合比を調します。 This machine grasp quantity of outbreak of regrind materials with consecutive driving and automatically regulate the combination ratio.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Gravimetric dosing system that does not require a space around a molding machine
Ble
nder
Sys
tem
& O
ther
sIn
dex
Blender
Dry
erC
onve
yor
Temp
erat
ure
Cont
rolle
r
Features
No separation due to conveying.
Saving space; Compact and lightweight.No separation; Direct mount on the machine.
Reducing Master batch.
No over dosing; Continuos and accurate dosing.
Save labor, time and resin at the color change.
Quick change hopper.Simply color change.Color change in 60 sec.
Accurate blending.
Resin and color flow together at the same; Inline dosing and Dosing cylinder®.
Iess pulsation, stable and accurate material supply by screwless dosing cylinder®.
The self-control function is built-in
This machine will drive calcuates the optimum mixture ratio automatically depending on the amount of crushed material.
Standard Specifications
Outer Dimension
Unit:mm
Power consumption
Language
Power cable
Operation
Input signal
Output signal
Measuring Capacity
Neck piece Model
Application
Communication
Data storage
Applicable material
Multilingual (Japanese, English, Chinese)
Cable length : 2m
8 inches color touch panel
Potential free-, 24VDC-
Extruder tacho(0-30VDC)start input
Error and warning, solenoid valve for automatic hopper loader
Measure regrind material by the combination of screw feeder and high torque motor.
● ッ ワーク
●Networking
ッ ワーク 続により、リアルタイムで
質管理が こなえます。
Real time quality control byLAN communication.
●MB材計量
●MB material measuring
LT ータ ドージングシリンダ
(スクリュ ーダー)の組合せ。
Measure MB material by the combination of screw feeder and row torque motor.
▲JCLWの計量供給部
MBV
JCLW Neck piece part
粉砕材Regrind material
MB材Masterbatchmaterial
0%0%
3%3% 20%20%
2.4%2.4%15%15%
2.55%2.55%成形 時The start of molding
連続 転中Continuous operation
連続 転中Continuous operation
連続 転に い粉砕材の 量を し、自動で配合比を調 します。This machine grasp quantity of outbreak of regrind materials with consecutive driving and automatically regulate the combination ratio.
JCLW-2-1S
JCLW-3-2S
主材は自然落下でMB材計量 ニッ 1台の組合せ。 (JCLW-2-1S)
主材は自然落下でMB材、 粉砕材の計量 ニッ 1台の組合せ。 (JCLW-3-2S)
比重08の 用マスターバッチを使用。 材料や供給機の種 により変わります。
積 能 重 200 様の ST90、 材 (120 〜) 用の 式タイプが選択 能。
プシ ン アMCL 2 り。 複数装置の ータ ロ ング、 種設定バックアップが 能。
している 材料 は 出来ません。
Virgin material is natural fall, and combination of one MB material metering unit.(JCLW-2-1S)Virgin material is natural fall, and combination of MB material metering unit and the regrind material metering unit.(JCLW-3-2S)
Measured with normal granular masterbatch apparent specific gravity 0.8. It changes depending on the type of feeder and material.
Selection of NST90 model(Max loading weight - 200kg), and the water cooling type Neck piece for high temperature materials(120℃~).
There is option software MCLAN2. Possible data logging of multiple devices, various settings backup. We cannot cope other than Applicable materials listing.
320
50
45
10
120
139
90
140
V W-
M8 4
465
443
V W-B
B
320
450
405
220
320
220
50
45
10
120
139
90
140
V W-
M8 4
450
405
V W-B
B
Gravimetric dosing system that does not require a space around a molding machine
Ble
nder
Sys
tem
& O
ther
sIn
dex
Blender
Dry
erC
onve
yor
Temp
erat
ure
Cont
rolle
r
Features
No separation due to conveying.
Saving space; Compact and lightweight.No separation; Direct mount on the machine.
Reducing Master batch.
No over dosing; Continuos and accurate dosing.
Save labor, time and resin at the color change.
Quick change hopper.Simply color change.Color change in 60 sec.
Accurate blending.
Resin and color flow together at the same; Inline dosing and Dosing cylinder®.
Iess pulsation, stable and accurate material supply by screwless dosing cylinder®.
The self-control function is built-in
This machine will drive calcuates the optimum mixture ratio automatically depending on the amount of crushed material.
Standard Specifications
Outer Dimension
Unit:mm
Power consumption
Language
Power cable
Operation
Input signal
Output signal
Measuring Capacity
Neck piece Model
Application
Communication
Data storage
Applicable material
Multilingual (Japanese, English, Chinese)
Cable length : 2m
8 inches color touch panel
Potential free-, 24VDC-
Extruder tacho(0-30VDC)start input
Error and warning, solenoid valve for automatic hopper loader
Measure regrind material by the combination of screw feeder and high torque motor.
● ッ ワーク
●Networking
ッ ワーク 続により、リアルタイムで
質管理が こなえます。
Real time quality control byLAN communication.
●MB材計量
●MB material measuring
LT ータ ドージングシリンダ
(スクリュ ーダー)の組合せ。
Measure MB material by the combination of screw feeder and row torque motor.
▲JCLWの計量供給部
MBV
JCLW Neck piece part
粉砕材Regrind material
MB材Masterbatchmaterial
0%0%
3%3% 20%20%
2.4%2.4%15%15%
2.55%2.55%成形 時The start of molding
連続 転中Continuous operation
連続 転中Continuous operation
連続 転に い粉砕材の 量を し、自動で配合比を調 します。This machine grasp quantity of outbreak of regrind materials with consecutive driving and automatically regulate the combination ratio.
JCLW-2-1S
JCLW-3-2S
主材は自然落下でMB材計量 ニッ 1台の組合せ。 (JCLW-2-1S)
主材は自然落下でMB材、 粉砕材の計量 ニッ 1台の組合せ。 (JCLW-3-2S)
比重08の 用マスターバッチを使用。 材料や供給機の種 により変わります。
積 能 重 200 様の ST90、 材 (120 〜) 用の 式タイプが選択 能。
プシ ン アMCL 2 り。 複数装置の ータ ロ ング、 種設定バックアップが 能。
している 材料 は 出来ません。
Virgin material is natural fall, and combination of one MB material metering unit.(JCLW-2-1S)Virgin material is natural fall, and combination of MB material metering unit and the regrind material metering unit.(JCLW-3-2S)
Measured with normal granular masterbatch apparent specific gravity 0.8. It changes depending on the type of feeder and material.
Selection of NST90 model(Max loading weight - 200kg), and the water cooling type Neck piece for high temperature materials(120℃~).
There is option software MCLAN2. Possible data logging of multiple devices, various settings backup. We cannot cope other than Applicable materials listing.