© 2012 Autodesk Quality Control for Autodesk ® Revit ® MEP Models R. Robert Bell Design Technology Manager, Sparling.

© 2012 Autodesk

Quality Control for Autodesk® Revit® MEP Models

R. Robert BellDesign Technology Manager, Sparling

© 2012 Autodesk

Learning Objectives

At the end of this class, you will be able to: Use Filters for QC of Worksets Resolve Common Modeling Mistakes Using Filters Resolve Common Modeling Mistakes Using Model Review Create a QC Checklist

© 2012 Autodesk

Use Filters for QC of Worksets

© 2012 Autodesk

Worksets

Shared levels and grids Levels and grids Reference planes Matchlines MEP elements

Specific views and filters Model Review add-in

© 2012 Autodesk

Resolve Common Modeling Mistakes Using Filters

© 2012 Autodesk

Common Modeling Mistakes

Element meant for the ceiling is on the floor Wall elements with no elevation Wall elements on a horizontal face Create filters based of family names

© 2012 Autodesk

Resolve Common Modeling Mistakes Using Model Review

© 2012 Autodesk

Model Review Add-in

Elevation is exposed Create a check Run the check Host element is exposed

© 2012 Autodesk

Create a QC Checklist

© 2012 Autodesk

QC Checklist

Format the questions so No is a fail Break the list into sections Put questions in order of

Documented steps for setup Elements and their parameters examined

Not all warnings are bad

© 2012 Autodesk

Class Summary

Quality control for worksets can be easy QC views make it easy to correct the model Element mishosting is harder to find Model Review add-in QC Checklist

© 2012 Autodesk

Autodesk, Revit* are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved.