Transcript
8/12/2019 Welding Inspection and Testing
1/14
WELDING INSPECTION AND TESTING
FWD 32503BS - BRITISH STANDARD
GROUP 5
MOHD AZRUL BIN ARIFFIN
JOZAIMIE BIN JOHANNI
MUHAMMAD SHABIQ BIN SHAHBUDIN
MOHD SHAHRULNIZAM BIN SAIDI
8/12/2019 Welding Inspection and Testing
2/14
BS EN 287-1
QUALIFICATION TEST OF WELDERS FUSIO
WELDING
PART 1: STEELS
8/12/2019 Welding Inspection and Testing
3/14
INTRODUCTION
The practice of approval testing of welding procedures
welders has been employed for over half a century.
Approval testing is carried out prior to production
commencing and it is therefore essentially a quality
assurance measure rather than a quality control activit
8/12/2019 Welding Inspection and Testing
4/14
WHAT IS BS EN 287-1?
BS EN 287-1 is a European Standard that defines t
qualification testing of welders for the fusion weld
of steels.
8/12/2019 Welding Inspection and Testing
5/14
HOW DOES IT HELP?
It provides a set of technical rules for a systematicqualification test for welders. It enables weldingqualifications to be uniformly accepted independentthe type of product, location and examiner/examinin
body.
It places emphasis on the welder's ability to manuallmanipulate the electrode / welding torch / welding
blowpipe and to produce a weld of acceptable qualit
8/12/2019 Welding Inspection and Testing
6/14
WHAT DOES IT COVER?
It covers fusion-welding processes which are designa
manual or partly mechanized welding. It does not cov
fully mechanized and automated welding processes.
8/12/2019 Welding Inspection and Testing
7/14
NORMATIVE REFERENCES
The following referenced documents are indispensabl
the application of this document. For dated references
only the edition cited applies. For undated references,
latest edition of the referenced document (including a
amendments) applies.
8/12/2019 Welding Inspection and Testing
8/14
EN 1320:1996,Destructive tests on welds in me
materialsFracture test.
EN 1435:1997,Non-destructive examination of
Radiographic examination of welded joints.
EN ISO 4063:2009, Welding and allied processe
Nomenclature of processes and reference numbe
(ISO 4063:2009).
EN ISO 5173:2010,Destructive tests on welds i
materialsBend tests (ISO 5173:2009).
8/12/2019 Welding Inspection and Testing
9/14
BS EN 288-1
Specification and approval of welding procedures f
metallic materials.
Part 1. General rules for fusion welding
8/12/2019 Welding Inspection and Testing
10/14
WHAT IS BS EN 288-1?
Fusion welding, Welding, Process specification, Metal
Specification (approval), Qualification approval, Appro
testing, Quality assurance systems, Definitions.
EN 288-1, one of the methods of weldingprocedure approval is by using a pre-production
welding test.
8/12/2019 Welding Inspection and Testing
11/14
INTRODUCTION
Welding procedure specifications are needed in order
to provide a well defined basis for planning of the weld
operations and for quality control during welding. Weld
is considered a special process in the terminology of
standards for quality systems. Standards for quality sys
usually require that special processes shall be carried ou
accordance with written procedure specifications.
8/12/2019 Welding Inspection and Testing
12/14
SCOPE
This standard defines general rules for the specification
approval of welding procedures for metallic materials.
standard also refers to several other standards as regarddetailed rules for specific applications.
8/12/2019 Welding Inspection and Testing
13/14
NORMATIVE REFERENCES
EN 287-1Approval testing of weldersFusion weldingPart 1: Steels
EN 287-2Approval testing of weldersFusion weldi
Part 2: Aluminium and aluminium alloys
EN 288-1 Specification and approval of weldingprocedures for metallic materials general rules for fu
welding
8/12/2019 Welding Inspection and Testing
14/14
THEEND
top related