Walsall E0301 Manual Call Point with Break Glass - Hazardous Area Zone 1 & Zone 2

Cornwallis Road, West Bromwich, West Midlands, B70 7DX, UKTel: +44 (0)121 500 6161 ~ Fax: +44 (0)121 500 6300Web: www.walsall-ltd.com ~ Email: sales@walsall-ltd.com

Walsall Middle EastRAK Free Trade Zone, P. O. Box 10559 Ras Al Khaimah, United Arab EmiratesTel: +971 (0) 7 2660039Fax: +971 (0) 7 2660242Email: walsall@eim.aeEmail: kenny@walsall.ae

Walsall North America 11490 Westheimer, Suite 850Houston 77077Texas, USATel: +1 (713) 425 6361Fax: +1 (713) 783 0067

Walsall Asia Pacific10 Upper Aljunied Link,York International Industrial Building #02-05 Singapore 367904Tel: +65 (0) 6858-5259Fax: +65 (0) 6858-6560Email: sales@walsall-ap.com

Walsall South AmericaAv Nilo Pecanha, 50.Sala 1709. Centro, Rio De Janeiro,RJ, Brazil.CEP, 20020-906.Tel: +55 (21) 2025 1059Fax: +55 (21) 3084-1446

Emergency Shutdown and Signalling Equipment

117

113

Ø8

120

113

A

B

C D

117

All Dimensions in mm.

Description Switch Position Resistor (s) Product Code

Fire Alarm without Resistors 1N/O and 1N/C - E030110

Fire Alarm with Series Resistors 1N/O and 1N/C To be specified E030111

Fire Alarm with end of the line Resistors 1N/O and 1N/C To be specified E030112

Fire Alarm with series & end of the line Resistors 1N/O and 1N/C To be specified E030113

ORDERING INFORMATION

ELECTRICAL SPECIFICATION

Operating Voltage Operating Current Conductor Size

Volts Max Amps mm² Max

415 2 max 2.5

Type E0301- Ex d IIC Manual Call point with Break Glass in Cast Iron

Material Cast Iron to 180BSI1452:1997

Finish Zinc rich epoxy powder primer and epoxy powder top coat

Colour Red (Other colours available)

Weight 4.5 Kg

Cover Fixing M6 allen head stainless steel screws

Gasket Nitrile O ring

Plastic Components Polycarbonate

Operator Flamepath Brass shaft in brass housing. Nitrile O ring seal

Entries 1x20mm threaded hole in face A, fitted with a nylon Ex e stopping plug. 1x20mm threaded hole in face B, fitted with a nylon Ex e cable gland. 25mm entries are available as an option.

Earthing Internal and external Ex e brass clamps on base. Earth on cover

ENCLOSURE SPECIFICATION

HAZARDOUS AREA SPECIFICATION

Marking to 94/9/EC II 2 GD

Type of Protection Ex d IIC T* GbEx tb IIIC T**°C Db

Ambient Temp.°C Gas Temperature Class (T*C)

Dust Temperature Class (T**)(°C)Min Max

-20* +50 T6 80

* -40°C when used with a plug and gland rated to -40°C

Ingress Protection IP66 to EN60529:1992

Area Classification Zones 1,2,21,22

Certification No. SIRA03ATEX1312