VMC-E 015-100 Serie recuperatori / Heat recovery series · VMC-E 015-100Serie recuperatori / Heat recovery series RHOSS S.P.A. Via Oltre Ferrovia, 32 - 33033 Codroipo (UD) - Italy
Post on 10-Oct-2020
2 Views
Preview:
Transcript
K14308 ed.1
VMC-E 015-100Serie recuperatori / Heat recovery series
Recuperatori di calore con motori “brushless DC”Heat recovery units with “brushless DC” motors
RECUPERO ENERGETICOHEAT RECOVERY
CARATTERISTICHE GENERALI
• Recuperatore di calore di tipo statico ad alto rendimento con flussiin controcorrente, costituito da fogli piani di carta speciale. Questoparticolare materiale consente uno scambio termico di tipo “totale” inquanto si recuperano sia il calore sensibile che il calore latente (umi-dità) con efficienza fino al 77% sulla temperatura e al 63% sull’ental-pia, con rendimenti elevati anche nel periodo estivo. I flussi d’ ariasono mantenuti separati da apposita sigillatura.
• La accurata progettazione ha consentito di realizzare unità dalledimensioni molto compatte, con agevole possibilità di manutenzio-ne dello scambiatore e dei filtri grazie all’estrazione laterale.
• I ventilatori delle unità "VMC-E" adottano motori di tipo"brushless DC" che consentono di ottenere efficienze più eleva-te rispetto ai motori standard.
• Valori molto contenuti della rumorosità, grazie alla scelta accuratadei componenti e dei materiali.
• Funzione free-cooling automatica.
• Efficace filtrazione dell’aria trattata.
• Controllore remoto KCVE (disponibilecome accessorio) con le funzioni on/off,selezione velocità, temporizzatore set-timanale programmabile. Adatto perinstallazione a parete su scatole elettri-che “502” (2 moduli). Il controllore KCVEpuò essere fornito a richiesta con teleco-mando a raggi infrarossi KTLCM.
GENERAL CHARACTERSTICS
• Static, counterflow heat exchanger, made of plane sheets of spe-cial paper. These exchangers are also called “total heat exchan-gers”: infact, they can recover both sensible and latent heat, withtemperature efficiency up to 77% and enthalpy efficiency up to63% and therefore they are particularly suitable for summerrecuperation.The air flows are separated by proper seal.
• Thanks to the accuracy of engineering, the units are very com-pact, and the periodical maintenance is very easy for the heatexchanger and the filters, both removable from the side.
• The fans of "VMC-E" units feature “brushless DC” motorswhich allow to obtain higher efficiency than the standardmotors.
• Very noiseless running, thanks to high quality of materials andcomponents.
• Automatic free-cooling function.
• High efficient air filtration.
• KCVE unit control panel (available as optional)featuring the on/off function, speed swit-
ching, weekly programming clock. It issuitble for wall mounting, in electricboxes type “502” (2 modules).The KCVE control panel is suitablefor infrared remote control KTLCM
(optional).
RECUPERO ENERGETICOHEAT RECOVERY
Scambiatore entalpico in controcorrenteCounterflow enthalpic heat exchanger
Aria espulsaExhaust air
Aria di rinnovoFresh air
Aria di rinnovoFresh air
Aria espulsaExhaust air
OUTDOORS INDOORS
UNITÀ DI RECUPERO CALORE HEAT RECOVERY UNIT
VMC-E
DATI TECNICI UNITÀ UNIT TECHNICAL DATA
(1) Valori riferiti alla portata d’aria nominale vinto il recuperatore e i filtri (2) Livello di pressione sonora: valori riferiti a 1,5 metri dall’aspirazione della macchina
in campo libero. Il livello di rumore operativo generalmente si discosta dai valoriindicati a seconda delle condizioni di funzionamento, del rumore riflesso e del rumore periferico
(3) Condizioni nominali invernali: aria esterna: -5°C BS, UR 80%aria ambiente: 20°C BS, UR 50%
(4) Condizioni nominali estive: aria esterna: 32°C BS, UR 50%aria ambiente: 26°C BS, UR 50%
(1) Referred to the nominal air flow after filter and plate heat exchanger.(2) Sound pressure level: data referred to 1,5 meters from inlet in free field.
The actual operation noise level generally differs from the values shown in the table, depending on the operation conditions, on the reflected noise and on the surrounding noise.
(3) Nominal winter conditions: outside air: -5°C DB, RH 80%ambient air: 20°C DB, RH 50%
(4) Nominal summer conditions: outside air: 32°C DB, RH 50%ambient air: 26°C DB, RH 50%
MODELLO / MODEL VMC-E 015 025 035 050 080 100
Portata aria nominale Nominal air flow
Alta velocità / High speedm3/h
150 250 350 500 800 1000Media velocità / Medium speed 150 250 350 500 800 780Bassa velocità / Low speed 100 160 270 360 625 650
Pressione statica utile (1)
External static pressure (1)
Alta velocità / High speedPa
85 85 90 100 150 150Media velocità / Medium speed 70 65 60 60 100 100Bassa velocità / Low speed 50 30 30 30 40 40
Potenza assorbitaPower input
Alta velocità / High speedW
80 90 120 135 300 310Media velocità / Medium speed 55 60 80 110 190 200Bassa velocità / Low speed 30 35 45 60 110 125
Livello di pressione sonora (2)
Sound pressure level (2)
Alta velocità / High speeddB(A)
26 27 31 33 38 39Media velocità / Medium speed 24 26 29 31 36 37Bassa velocità / Low speed 22 22 25 27 32 33
Alimentazione elettrica Electrical supply V/ph/Hz 230/1/50RECUPERATORE DI CALORE / HEAT EXCHANGERRegime invernale / Winter conditions (3)
Efficienza / Efficiency Temperatura / Temperature
%77 76 77 76,5 73 73,5
Entalpia / Enthalpy 62 62 63 62,3 59 59,5Potenza recuperata / Transferred power kW 1,3 2,2 3,1 4,3 6,5 8,2
Regime estivo / Summer conditions (4)
Efficienza / Efficiency Temperatura / Temperature
%63 62 63 62,5 59 59,5
Entalpia / Enthalpy 60 60 61 60 57 57,5Potenza recuperata / Transferred power kW 0,5 0,8 1,2 1,7 2,5 3,2
ModelloModel
Dimensione / Dimension [mm] PesoWeight
[kg]
Dimensioni imballoPacking dimensions
[mm]A B C D E F G H I Ød LxR
DIMENSIONI E PESI DIMENSIONS AND WEIGHTS
VMC-E 015 670 885 720 815 1075 342 112 270 784 100 / 33 1125x830x345
VMC-E 025 670 885 720 815 1075 342 112 270 784 150 / 33 1125x830x345
VMC-E 035 810 885 860 815 1075 482 112 270 924 150 / 38 1125x985x355
VMC-E 050 997 966 1045 905 1030 728 38 312 1106 200 / 54 1190x1150x386
VMC-E 080 885 1322 936 1252 1488 430 172 396 995 250 / 74 1545x1045x470
VMC-E 100 1132 1322 1186 1252 1488 681 172 396 1246 250 / 89 1545x1300x470
Modelli - SizeVMC-E 015 ÷ 100
Quadro elettricoElectrical case
Pannello ispezioniCheck cover
Aria espulsa / Exhaust airAria di rinnovo / Fresh air
VMC-E 015-100Serie recuperatori / Heat recovery seriesRHOSS S.P.A.Via Oltre Ferrovia, 32 - 33033 Codroipo (UD) - Italytel. +39 0432 911611 - fax +39 0432 911600rhoss@rhoss.it - www.rhoss.it - www.rhoss.com
IR GROUP S.A.S.U.19, chemin de la Plaine - 69390 Vourles - Francetél. +33 (0)4 72 31 86 31 - fax +33 (0)4 72 31 86 30exportsales@rhoss.it
RHOSS Deutschland GmbHHölzlestraße 23, D-72336 Balingen, OT Engstlatt - Germanytel. +49 (0)7433 260270 - fax +49 (0)7433 2602720info@rhoss.de - www.rhoss.de
Uffici commerciali Italia:Codroipo (UD)33033 Via Oltre Ferrovia, 32tel. +39 0432 911611 - fax +39 0432 911600
Agrate Brianza (MI)20041 Centro Colleoni - Palazzo Taurus, 1tel. +39 039 6898394 - fax +39 039 6898395
La R
HO
SS S
.P.A
. no
n s
i ass
um
e al
cun
a re
spo
nsa
bili
tà p
er e
ven
tual
i err
ori
del
pre
sen
te s
tam
pat
o e
si r
itien
e lib
era
di v
aria
re s
enza
pre
avvi
so le
car
atte
ristic
he
dei
pro
pri
pro
do
tti.
RHO
SS S
.P.A
. dec
lines
all
resp
on
sib
ility
for
po
ssib
le m
ista
kes
in t
his
do
cum
ent
and
res
erve
s th
e rig
ht
to a
lter
the
feat
ure
s o
f th
eir
pro
du
cts
with
ou
t n
otic
e.
K1
43
08
ed
.1
03.1
1
top related