VAC TagMaster Training Module T6, Page 1 TagMaster AB TagMaster Training 2013 GEN4 Software Applications.
Post on 14-Dec-2015
243 Views
Preview:
Transcript
VAC
TagMaster Training
Module T6, Page 1TagMaster AB
TagMaster Training 2013
GEN4 Software Applications
TagMaster Training
Module T6, Page 2TagMaster AB
Contents
Software Application Overview Relevant Documentation Details
WiseMan WatchMan PassMan
TagMaster Training
Module T6, Page 3TagMaster AB
TagMaster’s Access Applications
WiseMan Stand-alone system ID-tag database in reader Reader makes decisions and controls the
gate
WatchMan Reader connected to external system via
RS232/RS485 (ConfiTalk polling protocol) ID-tag database in external system External system makes decisions and tells
the reader when to open the gate
PassMan Reader connected to existing access control
system via Wiegand/Mag-stripe interface ID-tag database in access control system Access control system makes decisions and
opens the gate
TagMaster Training
Module T6, Page 7TagMaster AB
WiseMan
TagMaster Training
Module T6, Page 8TagMaster AB
WiseMan
Stand-alone (or host-controlled) system ID-tag database in reader Reader makes decisions and controls the gate
TagMaster Training
Module T6, Page 9TagMaster AB
WiseMan
WiseMan functional overview
TagMaster Training
Module T6, Page 10TagMaster AB
WiseMan
Functional inputs: ID-tag Tamper switch Moving objects Info from host
Functional outputs Relay Buzzer LED Info to host
Log is volatile (RAM) Database in non-volatile (Flash)
Stand-alone installation using WiseMan
TagMaster Training
Module T6, Page 11TagMaster AB
WiseMan
Host communication: RS232 RS485 (2-wire) RS485 (4-wire)
Host communication is using protocol ConfiTalk
Configuration can be done using Web interface (TCP/IP) Terminal interface (Service port) Serial communication messages (RS232, 2-wire RS485, 4-wire RS485)
TagMaster Training
Module T6, Page 16TagMaster AB
WatchMan
TagMaster Training
Module T6, Page 17TagMaster AB
WatchMan
Reader connected to external system via RS232/RS485 (ConfiTalk) ID-tag database in external system External system makes decisions and tells the reader to open the gate
TagMaster Training
Module T6, Page 18TagMaster AB
WatchMan
WatchMan functional overview
TagMaster Training
Module T6, Page 19TagMaster AB
WatchMan
Functional inputs: ID-tag Inputs (3) Moving objects Info from host
Functional outputs Relay Outputs (2) Buzzer LED Info to host
Host controller installation using WatchMan
TagMaster Training
Module T6, Page 20TagMaster AB
WatchMan
Host communication: RS232 RS485 (2-wire) RS485 (4-wire)
Host communication is using protocol ConfiTalk
Configuration can be done using Web interface (TCP/IP) Terminal interface (Service port) Serial communication messages (RS232, 2-wire RS485, 4-wire RS485)
TagMaster Training
Module T6, Page 24TagMaster AB
PassMan
TagMaster Training
Module T6, Page 25TagMaster AB
PassMan
Reader connected to existing access control system via Wiegand / Mag-stripe / serial interface
ID-tag database in access control system Access control system makes decisions and opens the gate
TagMaster Training
Module T6, Page 26TagMaster AB
PassMan
PassMan functional overview, Access Control
PassMan functional overview, Host application
TagMaster Training
Module T6, Page 27TagMaster AB
PassMan
Functional inputs: ID-tag Loop trigger Moving objects (Info from host)
Functional outputs Info to access control system Relay Buzzer LED (Info to host)
A typical installation using PassMan is an extension of an existing access control system
TagMaster Training
Module T6, Page 28TagMaster AB
PassMan
Access Control System Communication Wiegand Mag-stripe Serial (RS232, 2-wire RS485)
Host communication: Serial (RS232, 2-wire RS485)
Configuration can be done using Web interface (TCP/IP) Terminal interface (Service port) PassMan terminal interface (RS232/RS485)
VAC
TagMaster Training
Module T6, Page 35TagMaster AB
End
top related