V Show Commands - Cisco · rr_reasonrr_sys_verrr_service[TABLE_smu_listinstall_smu_id+]manufacturer] Syntax Description version Showthesoftwareversion __readonly__ header_str Type:string
Post on 30-Jan-2021
2 Views
Preview:
Transcript
V Show Commands
• show vdc, page 4
• show vdc current-vdc, page 6
• show vdc fcoe-vlan-range, page 7
• show vdc resource (res_mgr), page 8
• show vdc resource (res_mgr), page 9
• show vdc resource template, page 11
• show version, page 12
• show version compatibility, page 14
• show version fex, page 15
• show version image, page 16
• show version module, page 17
• show version module epld, page 18
• show virtual-service, page 19
• show virtual-service storage pool list, page 23
• show virtual-service tech-support, page 24
• show virtual-service utilization name, page 25
• show virtual-service version, page 28
• show vlan-mgr errors, page 29
• show vlan-mgr event-history, page 30
• show vlan, page 31
• show vlan access-list, page 34
• show vlan access-map, page 44
• show vlan all-ports, page 46
• show vlan counters, page 48
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 1
• show vlan dot1Q tag native, page 50
• show vlan filter, page 51
• show vlan id, page 52
• show vlan id counters, page 55
• show vlan id vn-segment, page 57
• show vlan mib private-vlan type, page 58
• show vlan name, page 60
• show vlan private-vlan, page 63
• show vlan private-vlan interface host, page 64
• show vlan private-vlan interface mapping, page 65
• show vlan private-vlan interface mode, page 66
• show vlan private-vlan interface trunk, page 67
• show vlan private-vlan mapping, page 69
• show vlan private-vlan type, page 70
• show vlan reserved, page 72
• show vlan xbrief, page 74
• show vlan xsummary, page 76
• show vpc (mcecm), page 77
• show vpc (mcecm), page 82
• show vpc consistency-parameters, page 96
• show vpc consistency-parameters vlans, page 97
• show vpc orphan-ports, page 101
• show vpc peer-keepalive, page 102
• show vpc role, page 105
• show vpc statistics, page 108
• show vpc statistics peer-keepalive, page 109
• show vrf, page 110
• show vrf interface, page 112
• show vrf topology, page 113
• show vrrp, page 114
• show vrrp bfd-sessions, page 118
• show vtp counters, page 120
• show vtp datafile, page 122
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)2
V Show Commands
• show vtp domain id, page 123
• show vtp interface, page 125
• show vtp mibstats, page 126
• show vtp password, page 127
• show vtp status, page 128
• show vtp trunk interface, page 131
• show vtp vlan, page 133
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 3
V Show Commands
show vdcshow vdc [ e-vdc2 ] [feature-set| detail|membership [all| status|module module]| shared membership][__readonly__ [detail2] [ swmode ] TABLE_vdc vdc_id vdc_name state mac hap sw boot_order [prioprio_per] [ create_time ] [ reload_count ] [ restart_count ] [ restart_time ] [ restart_reason ] vtype lc-support[TABLE_fs fs_id fs_name] [TABLE_port port-list]]
Syntax Description Show Virtual Device Contextsshow
Show Virtual Device Contextsvdc
Type: userdef
Enter Virtual Device Context
e-vdc2
Show detailed vdc informationdetail
Show vdc interface membership informationmembership
Show the shared interfaces in a vdcshared
Show the shared interfaces in a vdcmembership
Show vdc interface membership information for a specific moduleonly
module
Type: integer
Show vdc interface membership information for a specific moduleonly
module
Show vdc related port-statusstatus
Show vdc feature-set informationfeature-set
Show offline modules as wellall
Read Only__readonly__
detail2
Type: stringswmode
TABLE_vdc
Type: uinteger
vdc-id
vdc_id
TABLE_port
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)4
V Show Commandsshow vdc
Type: interface
port membership for VDC
port-list
Type: string
vdc-name
vdc_name
Type: string
state
state
Type: string
mac address for VDC
mac
Type: string
hap policy
hap
Type: string
sw policy
sw
Type: stringvtype
Type: stringlc-support
Type: datecreate_time
Type: uintegerreload_count
Type: uintegerrestart_count
Type: daterestart_time
Type: stringrestart_reason
TABLE_fs
Type: uinteger
fs id
fs_id
Type: stringfs_name
Type: integerboot_order
Type: integerprio
Type: integerprio_per
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 5
V Show Commandsshow vdc
show vdc current-vdcshow vdc current-vdc [__readonly__ mode name]
Syntax Description Show Virtual Device Contextsshow
Show Virtual Device Contextsvdc
Show which vdc you are currently incurrent-vdc
Read Only__readonly__
Type: uinteger
cli mode
mode
Type: string
vdc name
name
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)6
V Show Commandsshow vdc current-vdc
show vdc fcoe-vlan-rangeshow vdc fcoe-vlan-range [__readonly__ fcoe-vdc [ fcoe-vlans ] [ sharing-vdcs ]]
Syntax Description Show Virtual Device Contextsshow
Show Virtual Device Contextsvdc
vlans reserved for FCoE Not available in this release.fcoe-vlan-range
Read Only__readonly__
Type: uintegerfcoe-vdc
Type: uintegersharing-vdcs
Type: integer-mrangefcoe-vlans
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 7
V Show Commandsshow vdc fcoe-vlan-range
show vdc resource (res_mgr)show vdc id resource [ res-mgr-res-known-name ] [__readonly__ TABLE_vdc_resource_single_vdcres_name min max used unused free]
Syntax Description Show running system informationshow
Show Virtual Device Contextsvdc
Type: userdef
Enter Virtual Device Context
id
Show resource configuration for VDCresource
Type: string
Resource name
res-mgr-res-known-name
Read Only__readonly__
Type: string
Resource Name
res_name
Type: uinteger
Resource min configuration
min
Type: uinteger
Resource max configuration
max
Type: uinteger
Resource current usage for this VDC
used
Type: uinteger
Resource reserved for this VDC but currently not used
unused
Type: uinteger
Resource current free for this VDC
free
TABLE_vdc_resource_single_vdc
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)8
V Show Commandsshow vdc resource (res_mgr)
show vdc resource (res_mgr)show vdc resource [ res-mgr-res-known-name ] [detail| hidden-too| with-flags]+ [__readonly__TABLE_resource resource_name total_used total_unused total_free total_avail total[TABLE_vdc_resource_across_vdcs vdc_name min max used unused free]]
Syntax Description Show running system informationshow
Show Virtual Device Contextsvdc
Show resource configuration across VDCsresource
Type: string
Resource name
res-mgr-res-known-name
Show detail resource configurationdetail
Also show hidden resourceshidden-too
Also show resource flagswith-flags
Read Only__readonly__
TABLE_resource
Type: string
Resource Name
resource_name
Type: uinteger
Resource current usage for all VDC
total_used
Type: uinteger
Resources currently reserved but not used across all VDC
total_unused
Type: uinteger
Resource current free for all VDC
total_free
Type: uinteger
Resource current available across all VDC
total_avail
Type: uinteger
Resources grand total
total
TABLE_vdc_resource_across_vdcs
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 9
V Show Commandsshow vdc resource (res_mgr)
Type: string
VDC name
vdc_name
Type: uinteger
Resource min configuration
min
Type: uinteger
Resource max configuration
max
Type: uinteger
Resource current usage for this VDC
used
Type: uinteger
Resource reserved for this VDC but currently not used
unused
Type: uinteger
Resource current free for this VDC
free
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)10
V Show Commandsshow vdc resource (res_mgr)
show vdc resource templateshow vdc resource template [ res-mgr-template-known-name-all ] [__readonly__ TABLE_templatetemplate_name TABLE_resource resource_name min max]
Syntax Description Show running system informationshow
Show Virtual Device Contextsvdc
Show resource configuration for VDCresource
Resource template configurationtemplate
Type: string
pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]*
length: 100
Resource template name
res-mgr-template-known-name-all
Read Only__readonly__
TABLE_template
Type: string
Resource Template Name
template_name
TABLE_resource
Type: string
Resource Name
resource_name
Type: uinteger
Resource min configuration
min
Type: uinteger
Resource max configuration
max
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 11
V Show Commandsshow vdc resource template
show versionshow version [__readonly__ header_str bios_ver_str [ loader_ver_str ] kickstart_ver_str [ sys_ver_str ]bios_cmpl_time kick_file_name kick_cmpl_time kick_tmstmp [ isan_file_name ] [ isan_cmpl_time ][ isan_tmstmp ] chassis_id module_id cpu_name memory mem_type proc_board_id host_name bootflash_size[ slot0_size ] kern_uptm_days kern_uptm_hrs kern_uptm_mins kern_uptm_secs [ rr_usecs ] [ rr_ctime ]rr_reason rr_sys_ver rr_service [TABLE_smu_list install_smu_id+] manufacturer]
Syntax Description Show the software versionversion
__readonly__
Type: stringheader_str
Type: stringbios_ver_str
Type: stringloader_ver_str
Type: stringkickstart_ver_str
Type: stringsys_ver_str
Type: stringbios_cmpl_time
Type: stringkick_file_name
Type: stringkick_cmpl_time
Type: stringkick_tmstmp
Type: stringisan_file_name
Type: stringisan_cmpl_time
Type: stringisan_tmstmp
Type: stringchassis_id
Type: stringmodule_id
Type: stringcpu_name
Type: integermemory
Type: stringmem_type
Type: stringproc_board_id
Type: stringhost_name
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)12
V Show Commandsshow version
Type: integerbootflash_size
Type: integerslot0_size
Type: integerkern_uptm_days
Type: integerkern_uptm_hrs
Type: integerkern_uptm_mins
Type: integerkern_uptm_secs
Type: integerrr_usecs
Type: daterr_ctime
Type: stringrr_reason
Type: stringrr_sys_ver
Type: stringrr_service
TABLE_smu_list
Type: stringinstall_smu_id
Type: stringmanufacturer
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 13
V Show Commandsshow version
show version compatibilityshow version compatibility uri0
Syntax Description Show running system informationshow
Show the software versionversion
Show the software compatibility matrix with given imagecompatibility
Type: uri
Enter URI
uri0
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)14
V Show Commandsshow version compatibility
show version fexshow version fex i
Syntax Description Show running system informationshow
Show the software versionversion
Show fex software versionfex
Type: integer
min: 100 max: 199
Enter FEX identifier
i
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 15
V Show Commandsshow version fex
show version imageshow version image uri0
Syntax Description Show running system informationshow
Show the software versionversion
Show the software version of a given imageimage
Type: uri
Enter URI
uri0
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)16
V Show Commandsshow version image
show version moduleshow version module module [__readonly__ TABLE_version slot type sw interim bios]
Syntax Description Show running system informationshow
Show the software versionversion
Show the software version of a Modulemodule
Type: integer
Enter module number
module
__readonly__
Show version infoTABLE_version
Type: uinteger
Slot
slot
Type: string
image type
type
Type: string
SW version
sw
Type: string
SW interim version
interim
Type: string
BIOS version
bios
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 17
V Show Commandsshow version module
show version module epldshow version module module epld
Syntax Description Show running system informationshow
Show the software versionversion
Show the software version of a Modulemodule
Type: integer
Enter module number
module
Show a module's current EPLD versionsepld
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)18
V Show Commandsshow version module epld
show virtual-serviceshow virtual-service [list| global| detail [name virt_serv_name]| core [name virt_serv_name_core]][__readonly__ [infrastructure_major_version infrastructure_minor_version total_virtual_services_installedtotal_virtual_services_activated maximum_vcpus_per_virtual_service machine_types_supportedmachine_types_disabled TABLE_resource_limits media_name quota committed available] [TABLE_listname status package_name] [TABLE_detail name package_name application_name application_versionapplication_description key_type signing_method licensing_name licensing_version ova_path statedisk_reservation memory_reservation cpu_reservation TABLE_attached_devices type name alias][TABLE_core name name_core]]
Syntax Description Show running system informationshow
Display virtualization service informationvirtual-service
Virtual service global informationglobal
List virtual serviceslist
Detailed informationdetail
Core informationcore
Information for a specific virtual servicename
Type: string
pattern: [a-zA-Z0-9_]+
length: 20
Name of a virtual service
virt_serv_name
Type: string
pattern: [a-zA-Z0-9_]+
length: 20
Name of a virtual service
virt_serv_name_core
Read Only__readonly__
Type: uinteger
Infrastructure major version
infrastructure_major_version
Type: uinteger
Infrastructure minor version
infrastructure_minor_version
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 19
V Show Commandsshow virtual-service
Type: uinteger
Total virtual services installed
total_virtual_services_installed
Type: uinteger
Total virtual services activated
total_virtual_services_activated
Type: uinteger
Maximum VCPUs per virtual service
maximum_vcpus_per_virtual_service
Type: string
Machine types supported
machine_types_supported
Type: string
Machine types disabled
machine_types_disabled
Virtual service global resource limitsTABLE_resource_limits
Type: string
Resource name
media_name
Type: uinteger
Resource Virtualization quota
quota
Type: uinteger
Resource Virtualization committed
committed
Type: uinteger
Resource Virtualization available
available
Virtual service list tableTABLE_list
Type: string
Virtual service name
name
Type: string
Virtual service status
status
Type: string
Virtual service package name
package_name
Virtual service detail tableTABLE_detail
Type: string
Virtual service name
name
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)20
V Show Commandsshow virtual-service
Type: string
Virtual service package name
package_name
Type: string
Name of the application
application_name
Type: string
Version of the application
application_version
Type: string
Description of the application
application_description
Type: string
Virtual service key type
key_type
Type: string
Method used to sign the package
signing_method
Type: string
Name of the license
licensing_name
Type: string
Version of the license
licensing_version
Type: string
Virtual service OVA path
ova_path
Type: string
Virtual service state
state
Type: uinteger
Virtual service disk reservation
disk_reservation
Type: uinteger
Virtual service memory reservation
memory_reservation
Type: uinteger
Virtual service CPU reservation
cpu_reservation
Attached devices tableTABLE_attached_devices
Type: string
Type of the attached device
type
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 21
V Show Commandsshow virtual-service
Type: string
Name of the attached device
name
Type: string
Alias for the attached device
alias
Virtual service core tableTABLE_core
Type: string
Virtual service name
name
Type: string
Name of core
name_core
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)22
V Show Commandsshow virtual-service
show virtual-service storage pool listshow virtual-service storage pool list [__readonly__ [TABLE_storage pool_name pool_type pool_path]]
Syntax Description Show running system informationshow
Display virtualization service storage pool informationvirtual-service
Storage information about virtual servicestorage
Storage pool information about virtual servicepool
List storage pool for virtual servicelist
Read Only__readonly__
Virtual service storage pool list tableTABLE_storage
Type: string
Virtual service storage pool name
pool_name
Type: string
Virtual service storage pool type
pool_type
Type: string
Virtual service storage pool path
pool_path
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 23
V Show Commandsshow virtual-service storage pool list
show virtual-service tech-supportshow virtual-service tech-support
Syntax Description Show running system informationshow
Gather information for virtualization services trouble shootingvirtual-service
Gather information for trouble shootingtech-support
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)24
V Show Commandsshow virtual-service tech-support
show virtual-service utilization nameshow virtual-service utilization name virt_serv_name [__readonly__ [TABLE_storage name alias rd_byteswr_bytes rd_requests wr_requests errors capacity used available usage] [TABLE_network name aliasrx_packets tx_packets rx_bytes tx_bytes rx_drops tx_drops rx_errors tx_errors] [TABLE_memory allocationused] [TABLE_cpu request actual state]]
Syntax Description Show running system informationshow
Display virtualization service utilization informationvirtual-service
Utilization information about virtual serviceutilization
Utilization of a virtual servicename
Type: string
pattern: [a-zA-Z0-9_]+
length: 20
Name of a virtual service
virt_serv_name
Read Only__readonly__
Virtual service storage utilizationTABLE_storage
Type: string
storage device name
name
Type: string
storage device alias
alias
Type: uinteger
Read Bytes
rd_bytes
Type: uinteger
Write Bytes
wr_bytes
Type: uinteger
Read requests
rd_requests
Type: uinteger
Write requests
wr_requests
Type: uinteger
errors
errors
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 25
V Show Commandsshow virtual-service utilization name
Type: uinteger
Capacity 1k blocks
capacity
Type: uinteger
Used 1k blocks
used
Type: uinteger
Available 1k blocks
available
Type: uinteger
Usage
usage
Virtual service network utilizationTABLE_network
Type: string
network device name
name
Type: string
network device alias
alias
Type: uinteger
Received packets
rx_packets
Type: uinteger
Transmitted packets
tx_packets
Type: uinteger
Received bytes
rx_bytes
Type: uinteger
Transmitted bytes
tx_bytes
Type: uinteger
Received drops
rx_drops
Type: uinteger
Transmitted drops
tx_drops
Type: uinteger
Received errors
rx_errors
Type: uinteger
Trnasmitted errors
tx_errors
Virtual service memory utilizationTABLE_memory
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)26
V Show Commandsshow virtual-service utilization name
Type: uinteger
Memory allocation
allocation
Type: uinteger
Memory used
used
Virtual service cpu utilizationTABLE_cpu
Type: uinteger
Requested Application Utilization
request
Type: uinteger
Actual Application Utilization
actual
Type: string
CPU state
state
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 27
V Show Commandsshow virtual-service utilization name
show virtual-service versionshow virtual-service version {installed| name virt_serv_name installed} [__readonly__ virt_service_nameapplication_name application_version]
Syntax Description Show running system informationshow
Display virtualization service version informationvirtual-service
Version information about virtual serviceversion
Installed versioninstalled
Version of a virtual servicename
Type: string
pattern: [a-zA-Z0-9_]+
length: 20
Name of a virtual service
virt_serv_name
Read Only__readonly__
Type: string
Virtual service name
virt_service_name
Type: string
Application name
application_name
Type: string
Application version
application_version
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)28
V Show Commandsshow virtual-service version
show vlan-mgr errorsshow vlan-mgr errors
Syntax Description Show running system informationshow
Show vlan manager event historyvlan-mgr
Show vlan manager errorserrors
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 29
V Show Commandsshow vlan-mgr errors
show vlan-mgr event-historyshow vlan-mgr event-history
Syntax Description Show running system informationshow
Show vlan manager event historyvlan-mgr
Show vlan manager event historyevent-history
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)30
V Show Commandsshow vlan-mgr event-history
show vlanshow vlan [__readonly__ vlanshowbr-hdr TABLE_vlanbrief vlanshowbr-vlanid vlanshowbr-vlanid-utfvlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ] vlanshowinfo-mtu-hdrTABLE_mtuinfo vlanshowinfo-vlanid vlanshowinfo-media-type vlanshowinfo-vlanmode[ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ] [ vlanshowrspan-hdr2 ] [ vlanshowrspan-vlanbitmap ][ pvlan-hdr ] [ pvlan-section ] [ pvlan-stby ] show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
Read Only__readonly__
VLAN brief table formatTABLE_vlanbrief
MTU information table formatTABLE_mtuinfo
Type: uinteger
VLAN brief header
vlanshowbr-hdr
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid-utf
Type: string
VLAN brief VLAN name
vlanshowbr-vlanname
VLAN brief VLAN state
active value: 1
VLAN Active State
suspend value: 2
VLAN Suspended State
vlanshowbr-vlanstate
VLAN brief shutdown state
shutdown value: 1
VLAN shut state
noshutdown value: 2
VLAN no shut state
vlanshowbr-shutstate
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 31
V Show Commandsshow vlan
Type: interface-mrange
Port list ifindex
vlanshowplist-ifidx
Type: uinteger
Vlan info mtu header
vlanshowinfo-mtu-hdr
Type: uinteger
Vlan info VLAN ID
vlanshowinfo-vlanid
Select media type
enet value: 1
Vlan type Ethernet
vlanshowinfo-media-type
VLAN brief VLAN mode
ce-vlan value: 0
Classical Ethernet VLAN mode
fabricpath-vlan value: 1
Fabricpath VLAN mode
vlanshowinfo-vlanmode
Type: uinteger
RSPAN VLAN header for one VLAN
vlanshowrspan-hdr1
Type: uinteger
RSPAN VLAN header for multiple VLANs
vlanshowrspan-hdr2
RSPAN VLAN one VLAN rspan or non-rspan
rspan value: 2
VLAN is RSPAN VLAN
notrspan value: 1
VLAN is not RSPAN VLAN
vlanshowrspan-vlantype
Type: bitmap
RSPAN VLAN multiple VLANs
vlanshowrspan-vlanbitmap
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)32
V Show Commandsshow vlan
Type: uinteger
private vlan section
pvlan-hdr
Type: uinteger
private vlan section
pvlan-section
Type: uinteger
private vlan section on standby
pvlan-stby
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 33
V Show Commandsshow vlan
show vlan access-listshow vlan access-list name [ inp_seqno ] [__readonly__ TABLE_vacl vacl_name [ vacl_seqno ] [TABLE_listip_ipv6_mac acl_name [TABLE_seqno seqno {permitdeny [proto_str| proto| ip| ipv6] {src_any| src_ip_prefix|src_ip_addr src_ip_mask| src_ipv6_prefix| src_ipv6_addr src_ipv6_mask|mac_src mac_src_wild| src_addrgrp}[src_port_op [ src_port1_str ] src_port1_num [src_port2_str| src_port2_num]| src_portgrp] {dest_any|dest_ip_prefix| dest_ip_addr dest_ip_mask| dest_ipv6_prefix| dest_ipv6_addr dest_ipv6_mask| mac_destmac_dest_wild| dest_addrgrp} [dest_port_op [ dest_port1_str ] dest_port1_num [dest_port2_str|dest_port2_num]| dest_portgrp] [{icmp_type [ icmp_code ]| icmp_str}| {icmpv6_type [ icmpv6_code ]|icmpv6_str}] [igmp_type| igmp_type_str] [[precedence| precedence_str] [tos| tos_str]| [dscp| dscp_str]] [ log ][ capture_session ] [ fragments ] [plen_op plen1 [ plen2 ]] [ urg ] [ ack ] [ psh ] [ rst ] [ syn ] [ fin ] [ established ][ flow_label ] [ timerange ] [eth_proto| eth_proto_str] [ vlan ] [ cos ] [ match_count ]| remark}]]]
Syntax Description Show running system informationshow
Vlan commandsvlan
Vlan access listaccess-list
Type: string
length: 64
List name
name
Type: uinteger
min: 1 max: 4294967295
Sequence number
inp_seqno
Type: string
length: 64
List name
vacl_name
__readonly__
Type: uinteger
min: 1 max: 4294967295
Sequence number
vacl_seqno
TABLE_vacl
TABLE_list
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)34
V Show Commandsshow vlan access-list
IP/iIPV6/MAC
ip value: 9
Display IP information
mac value: 11
MAC configuration commands
ipv6 value: 10
Configure IPv6 features
ip_ipv6_mac
Type: string
length: 64
Access list name
acl_name
Type: uinteger
min: 1 max: 4294967295
Sequence number
seqno
Type: uinteger
min: 1 max: 4294967295
Sequence number
seqno
Permit/deny
permit value: 2
Specify packets to forward
deny value: 3
Specify packets to reject
permitdeny
Type: uinteger
min: 0 max: 255
A protocol number
proto
TABLE_seqno
Type: string
Protocol name
proto_str
IP
ip value: 1
IP Protocol
ip
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 35
V Show Commandsshow vlan access-list
IPV6
ipv6 value: 1
IPv6 Protocol
ipv6
SRCAny
any value: 1
Any IP address
src_any
DESTAny
any value: 1
Any IP address
dest_any
Type: ipprefix
Source IP prefix
src_ip_prefix
Type: ipaddr
Source IP address
src_ip_addr
Type: ipaddr
Source IP mask
src_ip_mask
Type: ipv6prefix
Source IPv6 prefix
src_ipv6_prefix
Type: ipv6addr
Source IP address
src_ipv6_addr
Type: ipv6addr
Source IP mask
src_ipv6_mask
Type: ethernet
Source MAC address
mac_src
Type: ethernet
Source MAC mask
mac_src_wild
Type: ipprefix
Destination IP prefix
dest_ip_prefix
Type: ipaddr
Destination IP address
dest_ip_addr
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)36
V Show Commandsshow vlan access-list
Type: ipaddr
Destination IP mask
dest_ip_mask
Type: ipv6prefix
Destination IPv6 prefix
dest_ipv6_prefix
Type: ipv6addr
Destination IP address
dest_ipv6_addr
Type: ipv6addr
Destination IP mask
dest_ipv6_mask
Type: ethernet
Destination MAC address
mac_dest
Type: ethernet
Destination MAC mask
mac_dest_wild
Source Port operator
lt value: 4
Match only packets with a lower port number
gt value: 5
Match only packets with a greater port number
eq value: 6
Match only packets on a given port number
neq value: 7
Match only packets not on a given port number
range value: 8
Match only packets in the range of port numbers
src_port_op
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 37
V Show Commandsshow vlan access-list
Destination Port operator
lt value: 4
Match only packets with a lower port number
gt value: 5
Match only packets with a greater port number
eq value: 6
Match only packets on a given port number
neq value: 7
Match only packets not on a given port number
range value: 8
Match only packets in the range of port numbers
dest_port_op
Type: string
Source port name
src_port1_str
Type: uinteger
Source port number
src_port1_num
Type: string
Source port name
src_port2_str
Type: uinteger
Source port number
src_port2_num
Type: string
Destination port name
dest_port1_str
Type: uinteger
Destination port number
dest_port1_num
Type: string
Destination port name
dest_port2_str
Type: uinteger
Destination port number
dest_port2_num
Type: uinteger
ICMP type
icmp_type
Type: uinteger
ICMP code
icmp_code
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)38
V Show Commandsshow vlan access-list
Type: string
ICMP message
icmp_str
Type: uinteger
ICMP type
icmpv6_type
Type: uinteger
ICMP code
icmpv6_code
Type: string
ICMP message
icmpv6_str
Type: uinteger
IGMP type
igmp_type
Type: string
IGMP type String
igmp_type_str
Type: uinteger
precedence
precedence
Type: string
precedence string
precedence_str
Type: uinteger
tos
tos
Type: string
tos string
tos_str
Type: uinteger
dscp
dscp
Type: string
dscp string
dscp_str
Type: uinteger
min: 1 max: 48
capture session
capture_session
Type: uinteger
min: 1 max: 48
capture session
global_capture_session
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 39
V Show Commandsshow vlan access-list
Log
enable value: 1
Log the packet
disable value: 2
Packet loging disabled
log
Fragments
enable value: 1
Match on fragments
disable value: 2
No fragment match
fragments
URG
enable value: 1
TCP urg flag set
disable value: 2
TCP urg flag clear
urg
ACK
enable value: 1
TCP ack flag set
disable value: 2
TCP ack flag clear
ack
PSH
enable value: 1
TCP psh flag set
disable value: 2
TCP psh flag clear
psh
RST
enable value: 1
TCP rst flag set
disable value: 2
TCP rst flag clear
rst
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)40
V Show Commandsshow vlan access-list
SYN
enable value: 1
TCP syn flag set
disable value: 2
TCP syn flag clear
syn
FIN
enable value: 1
TCP fin flag set
disable value: 2
TCP fin flag clear
fin
ESTABLISHED
enable value: 1
TCP established connection
disable value: 2
TCP not established connection
established
Type: uinteger
IPv6 flow label
flow_label
Type: string
Time-range
timerange
Type: hex
MAC protocol number
eth_proto
Type: string
MAC protocol name
eth_proto_str
Type: integer
min: 0 max: 4095
VLAN number
vlan
Type: integer
min: 0 max: 7
CoS value
cos
Type: longlong
Number of packets matching the ACL
match_count
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 41
V Show Commandsshow vlan access-list
Type: string
Remark String
remark
STATISTICS
enable value: 1
Statistics enabled for ACL
disable value: 2
Statistics not enabled for ACL
statistics
Type: string
Source address group
src_addrgrp
Type: string
Destination address group
dest_addrgrp
Type: string
Source port group
src_portgrp
Type: string
Destination port group
dest_portgrp
Source Port operator
lt value: 4
Match only packets with a lower packet length
gt value: 5
Match only packets with a greater packet length
eq value: 6
Match only packets on a given packet length
neq value: 7
Match only packets not on a given packet length
range value: 8
Match only packets in the range of packet lengths
plen_op
Type: uinteger
Packet length minimum
plen1
Type: uinteger
packet length maximum
plen2
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)42
V Show Commandsshow vlan access-list
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 43
V Show Commandsshow vlan access-list
show vlan access-mapshow vlan access-map [ name ] [__readonly__ [TABLE_vacl vacl_name [TABLE_seqno [ seqno ][ip_ipv6_mac match_name+ [ action_drop ] [ action_log ] [ action_fwd ] [ action_capture ] [action_redirectintf]] [ statistics ]]]]
Syntax Description Show running system informationshow
Vlan commandsvlan
List VLAN access mapsaccess-map
Type: string
length: 64
List name
name
Type: string
length: 64
List name
vacl_name
__readonly__
Type: uinteger
min: 1 max: 4294967295
Sequence number
seqno
TABLE_vacl
TABLE_seqno
Type: uinteger
min: 1 max: 4294967295
Sequence number
seqno
IP/iIPV6/MAC
ip value: 9
Display IP information
mac value: 11
MAC configuration commands
ipv6 value: 10
Display IPv6 information
ip_ipv6_mac
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)44
V Show Commandsshow vlan access-map
Type: string
length: 64
Access list name
match_name
DROP
drop value: 1
DROP action
action_drop
LOG
log value: 1
Log the packet
action_log
FWD
forward value: 1
FWD the packet
action_fwd
CAPTURE
capture value: 1
Capture the packet
action_capture
REDIRECT
redirect value: 1
Redirect the packet
action_redirect
Type: interface
Interface traffic is redirected to
intf
STATISTICS
enable value: 1
Statistics enabled for Vlan access-list
disable value: 2
Statistics not enabled for vlan access-list
statistics
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 45
V Show Commandsshow vlan access-map
show vlan all-portsshow vlan all-ports [__readonly__ vlanshowbr-hdr TABLE_vlanbriefallports vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
Show all ports on VLANall-ports
Read Only__readonly__
VLAN brief table formatTABLE_vlanbriefallports
Type: uinteger
VLAN brief header
vlanshowbr-hdr
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid-utf
Type: string
VLAN brief VLAN name
vlanshowbr-vlanname
VLAN brief VLAN state
active value: 1
VLAN Active State
suspend value: 2
VLAN Suspended State
vlanshowbr-vlanstate
VLAN brief shutdown state
shutdown value: 1
VLAN shut state
noshutdown value: 2
VLAN no shut state
vlanshowbr-shutstate
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)46
V Show Commandsshow vlan all-ports
Type: interface-mrange
Port list ifindex
vlanshowplist-ifidx
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 47
V Show Commandsshow vlan all-ports
show vlan countersshow vlan counters [__readonly__ TABLE_vlancounters vlanshowbr-vlanid [ l2_ing_ucast_b ][ l2_ing_ucast_p ] [ l2_ing_mcast_b ] [ l2_ing_mcast_p ] [ l2_ing_bcast_b ] [ l2_ing_bcast_p ][ l2_egr_ucast_b ] [ l2_egr_ucast_p ] [ l3_ucast_rcv_b ] [ l3_ucast_rcv_p ]]
Syntax Description Show running system informationshow
Vlan commandsvlan
display counterscounters
Read Only__readonly__
vlan counters table formatTABLE_vlancounters
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: longlong
L2 Ingress unicast octets
l2_ing_ucast_b
Type: longlong
L2 Ingress unicast packets
l2_ing_ucast_p
Type: longlong
L2 Ingress multicast octets
l2_ing_mcast_b
Type: longlong
L2 Ingress multicast packets
l2_ing_mcast_p
Type: longlong
L2 Ingress broadcast octets
l2_ing_bcast_b
Type: longlong
L2 Ingress broadcast packets
l2_ing_bcast_p
Type: longlong
L2 Egress unicast octets
l2_egr_ucast_b
Type: longlong
L2 Egress unicast packets
l2_egr_ucast_p
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)48
V Show Commandsshow vlan counters
Type: longlong
L3 unicast octets in
l3_ucast_rcv_b
Type: longlong
L3 unicast packets in
l3_ucast_rcv_p
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 49
V Show Commandsshow vlan counters
show vlan dot1Q tag nativeshow vlan dot1Q tag native [__readonly__ tag_native_mode]
Syntax Description Show running system informationshow
VTP VLAN statusvlan
Display dot1q parametersdot1Q
Display tag parameterstag
Display native vlan taggingnative
Read Only__readonly__
Native vlan tagging mode
disabled value: 0
Vlan dot1Q tag native is disabled
enabled value: 1
Vlan dot1Q tag native is enabled
tag_native_mode
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)50
V Show Commandsshow vlan dot1Q tag native
show vlan filtershow vlan filter [access-map name| vlan vlan] [__readonly__ TABLE_vlan_filter name configured_vlans]
Syntax Description Show running system informationshow
Vlan commandsvlan
Information about VLAN filtersfilter
Show the VLANs where an access-map is appliedaccess-map
Type: string
length: 64
List name
name
Show the access-map applied to a VLANvlan
Type: vlan
VLAN number
vlan
__readonly__
TABLE_vlan_filter
Type: integer-mrange
VLAN numbers
configured_vlans
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 51
V Show Commandsshow vlan filter
show vlan idshow vlan id vlan-id [__readonly__ vlanshowbr-hdr TABLE_vlanbriefid vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]vlanshowinfo-mtu-hdr TABLE_mtuinfoid vlanshowinfo-vlanid vlanshowinfo-media-typevlanshowinfo-vlanmode [ vlanshow-vlanerrbitmap ] [ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ][ vlanshowrspan-hdr2 ] [ vlanshowrspan-vlanbitmap ] [ pvlan-hdr ] [ pvlan-id-section ] [ pvlan-stby ][ is-vtp-manageable ] [ is-internal ] [ is-reserved ] [ is-rspan ] [ is-dynamic-gvrp ] show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN idid
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Read Only__readonly__
VLAN brief table formatTABLE_vlanbriefid
MTU information table formatTABLE_mtuinfoid
Type: uinteger
VLAN brief header
vlanshowbr-hdr
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid-utf
Type: string
VLAN brief VLAN name
vlanshowbr-vlanname
VLAN brief VLAN state
active value: 1
VLAN Active State
suspend value: 2
VLAN Suspended State
vlanshowbr-vlanstate
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)52
V Show Commandsshow vlan id
VLAN brief shutdown state
shutdown value: 1
VLAN shut state
noshutdown value: 2
VLAN no shut state
vlanshowbr-shutstate
Type: interface-mrange
Port list ifindex
vlanshowplist-ifidx
Type: uinteger
Vlan info mtu header
vlanshowinfo-mtu-hdr
Type: uinteger
Vlan info VLAN ID
vlanshowinfo-vlanid
Select media type
enet value: 1
Vlan type Ethernet
vlanshowinfo-media-type
VLAN brief VLAN mode
ce-vlan value: 0
Classical Ethernet VLAN mode
fabricpath-vlan value: 1
Fabricpath VLAN mode
vlanshowinfo-vlanmode
Type: bitmap
VLAN error bitmap
vlanshow-vlanerrbitmap
Type: uinteger
RSPAN VLAN header for one VLAN
vlanshowrspan-hdr1
Type: uinteger
RSPAN VLAN header for multiple VLANs
vlanshowrspan-hdr2
RSPAN VLAN one VLAN rspan or non-rspan
rspan value: 2
VLAN is RSPAN VLAN
notrspan value: 1
VLAN is not RSPAN VLAN
vlanshowrspan-vlantype
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 53
V Show Commandsshow vlan id
Type: bitmap
RSPAN VLAN multiple VLANs
vlanshowrspan-vlanbitmap
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Type: uinteger
private vlan section
pvlan-hdr
Type: uinteger
private id vlan section
pvlan-id-section
Type: uinteger
private vlan section on standby
pvlan-stby
Type: bool
VTP Manageable VLAN flag
is-vtp-manageable
Type: bool
Internal VLAN flag
is-internal
Type: bool
Reserved VLAN flag
is-reserved
Type: bool
RSPAN VLAN flag
is-rspan
Type: bool
Dynamic GVRP VLAN flag
is-dynamic-gvrp
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)54
V Show Commandsshow vlan id
show vlan id countersshow vlan id vlan-id counters [__readonly__ TABLE_vlancounters vlanshowbr-vlanid [ l2_ing_ucast_b ][ l2_ing_ucast_p ] [ l2_ing_mcast_b ] [ l2_ing_mcast_p ] [ l2_ing_bcast_b ] [ l2_ing_bcast_p ][ l2_egr_ucast_b ] [ l2_egr_ucast_p ]]
Syntax Description Show running system informationshow
Vlan commandsvlan
VLAN status by VLAN idid
display counterscounters
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Read Only__readonly__
vlan counters table formatTABLE_vlancounters
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: longlong
L2 Ingress unicast octets
l2_ing_ucast_b
Type: longlong
L2 Ingress unicast packets
l2_ing_ucast_p
Type: longlong
L2 Ingress multicast octets
l2_ing_mcast_b
Type: longlong
L2 Ingress multicast packets
l2_ing_mcast_p
Type: longlong
L2 Ingress broadcast octets
l2_ing_bcast_b
Type: longlong
L2 Ingress broadcast packets
l2_ing_bcast_p
Type: longlong
L2 Egress unicast octets
l2_egr_ucast_b
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 55
V Show Commandsshow vlan id counters
Type: longlong
L2 Egress unicast packets
l2_egr_ucast_p
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)56
V Show Commandsshow vlan id counters
show vlan id vn-segmentshow vlan id vlan-id vn-segment [__readonly__ vlanshowinfo-segid-hdr TABLE_seginfoidvlanshowinfo-seg-vlanid vlanshowinfo-segment-id show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN idid
Show vn-segment mappingvn-segment
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Read Only__readonly__
Segment id information table formatTABLE_seginfoid
Type: uinteger
Vlan info segment id header
vlanshowinfo-segid-hdr
Type: uinteger
Vlan info VLAN ID
vlanshowinfo-seg-vlanid
Type: uinteger
Vlan info SEGMENT ID
vlanshowinfo-segment-id
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 57
V Show Commandsshow vlan id vn-segment
show vlan mib private-vlan typeshow vlan [id vlan-id] mib private-vlan type [__readonly__ start vlan pvlan-type primary]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN idid
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Private VLAN informationprivate-vlan
Private VLAN type informationtype
mibmib
Read Only__readonly__
Type: uinteger
Start
start
Type: uinteger
vlan
vlan
normal value: 1
normal
primary value: 2
Primary PVLAN
isolated value: 3
Isolated PVLAN
community value: 4
Community PVLAN
pvlan-type
Type: uinteger
associated to primary
primary
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)58
V Show Commandsshow vlan mib private-vlan type
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 59
V Show Commandsshow vlan mib private-vlan type
show vlan nameshow vlan name vname [__readonly__ vlanshowbr-hdr TABLE_vlanbriefname vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]vlanshowinfo-mtu-hdr TABLE_mtuinfoname vlanshowinfo-vlanid vlanshowinfo-media-typevlanshowinfo-vlanmode [ vlanshowrspan-hdr1 ] [ vlanshowrspan-vlantype ] [ vlanshowrspan-hdr2 ][ vlanshowrspan-vlanbitmap ] show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN namename
Type: string
length: 128
A VLAN name
vname
Read Only__readonly__
VLAN brief table formatTABLE_vlanbriefname
MTU information table formatTABLE_mtuinfoname
Type: uinteger
VLAN brief header
vlanshowbr-hdr
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid-utf
Type: string
VLAN brief VLAN name
vlanshowbr-vlanname
VLAN brief VLAN state
active value: 1
VLAN Active State
suspend value: 2
VLAN Suspended State
vlanshowbr-vlanstate
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)60
V Show Commandsshow vlan name
VLAN brief shutdown state
shutdown value: 1
VLAN shut state
noshutdown value: 2
VLAN no shut state
vlanshowbr-shutstate
Type: interface-mrange
Port list ifindex
vlanshowplist-ifidx
Type: uinteger
Vlan info mtu header
vlanshowinfo-mtu-hdr
Type: uinteger
Vlan info VLAN ID
vlanshowinfo-vlanid
Select media type
enet value: 1
Vlan type Ethernet
vlanshowinfo-media-type
VLAN brief VLAN mode
ce-vlan value: 0
Classical Ethernet VLAN mode
fabricpath-vlan value: 1
Fabricpath VLAN mode
vlanshowinfo-vlanmode
Type: uinteger
RSPAN VLAN header for one VLAN
vlanshowrspan-hdr1
Type: uinteger
RSPAN VLAN header for multiple VLANs
vlanshowrspan-hdr2
RSPAN VLAN one VLAN rspan or non-rspan
rspan value: 2
VLAN is RSPAN VLAN
notrspan value: 1
VLAN is not RSPAN VLAN
vlanshowrspan-vlantype
Type: bitmap
RSPAN VLAN multiple VLANs
vlanshowrspan-vlanbitmap
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 61
V Show Commandsshow vlan name
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)62
V Show Commandsshow vlan name
show vlan private-vlanshow vlan [id vlan-id] private-vlan [__readonly__ start primary secondary pvlan-type ports]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN idid
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Private VLAN informationprivate-vlan
Read Only__readonly__
Type: uinteger
Start
start
Type: uinteger
Primary VLAN
primary
Type: uinteger
Secondary VLAN
secondary
isolated value: 1
Isolated PVLAN
community value: 2
Community PVLAN
primary value: 3
Primary PVLAN
non-operational value: 4
Non-operational PVLAN
pvlan-type
Type: uinteger
Port list
ports
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 63
V Show Commandsshow vlan private-vlan
show vlan private-vlan interface hostshow vlan private-vlan interface [ if ] host [next data] [__readonly__ start interface-id secondary-vlan]
Syntax Description Show running system informationshow
VLAN statusvlan
Private VLAN informationprivate-vlan
Show interface status and informationinterface
Type: interface-mrange
Interface id
if
private-vlan hosthost
next-entrynext
Type: uinteger
ignore junk value
data
Read Only__readonly__
Type: uinteger
Start
start
Type: interface
Interface
interface-id
Type: uinteger
Secondary Vlan
secondary-vlan
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)64
V Show Commandsshow vlan private-vlan interface host
show vlan private-vlan interface mappingshow vlan private-vlan interface [ if ]mapping [__readonly__ start interface-idmulti-primary secondary-vlantwo-way]
Syntax Description Show running system informationshow
VLAN statusvlan
Private VLAN informationprivate-vlan
Show interface status and informationinterface
Type: interface-mrange
Interface id
if
private-vlan mappingmapping
Read Only__readonly__
Type: uinteger
Start
start
Type: interface
Interface
interface-id
Type: bool
multiple primay capable
multi-primary
Type: bitmap
seconadry vlans bitmap
secondary-vlan
Type: bool
multiple primay capable
two-way
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 65
V Show Commandsshow vlan private-vlan interface mapping
show vlan private-vlan interface modeshow vlan private-vlan interface [ if ] mode [next data] [__readonly__ start interface-id port-mode]
Syntax Description Show running system informationshow
VLAN statusvlan
Private VLAN informationprivate-vlan
Show interface status and informationinterface
Type: interface-mrange
Interface id
if
private-vlan port modemode
next-entrynext
Type: uinteger
ignore junk value
data
Read Only__readonly__
Type: uinteger
Start
start
Type: interface
Interface
interface-id
not-private-vlan value: 1
private-vlan-host value: 2
private-vlan-promiscuous value: 3
private-vlan-trunk value: 4
port-mode
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)66
V Show Commandsshow vlan private-vlan interface mode
show vlan private-vlan interface trunkshow vlan private-vlan interface [ if ] trunk [__readonly__ start interface-id dynamic-state encap-typenative-vlan secondary-vlans normal-vlans dynamic-status encap-oper-type]
Syntax Description Show running system informationshow
VLAN statusvlan
Private VLAN informationprivate-vlan
Show interface status and informationinterface
Type: interface-mrange
Interface id
if
pvlan trunktrunk
Read Only__readonly__
Type: uinteger
Start
start
Type: interface
Interface
interface-id
Type: uinteger
dynamic state
dynamic-state
Type: uinteger
encapsulation type
encap-type
Type: uinteger
native vlan
native-vlan
Type: bitmap
secondary vlans
secondary-vlans
Type: bitmap
normal vlans
normal-vlans
Type: uinteger
dynamic status
dynamic-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 67
V Show Commandsshow vlan private-vlan interface trunk
Type: uinteger
encap oper type
encap-oper-type
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)68
V Show Commandsshow vlan private-vlan interface trunk
show vlan private-vlan mappingshow vlan [id vlan-id] private-vlan mapping [next data] [__readonly__ start vlan-id primary]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN idid
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Private VLAN informationprivate-vlan
private-vlan mappingmapping
next-entrynext
Type: uinteger
ignore junk value
data
Read Only__readonly__
Type: uinteger
Start
start
Type: uinteger
secondary
vlan-id
Type: uinteger
primary-vlan
primary
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 69
V Show Commandsshow vlan private-vlan mapping
show vlan private-vlan typeshow vlan [id vlan-id] private-vlan type [__readonly__ start vlan pvlan-type primary]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN status by VLAN idid
Type: vlan-mrange
VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19
vlan-id
Private VLAN informationprivate-vlan
Private VLAN type informationtype
Read Only__readonly__
Type: uinteger
Start
start
Type: uinteger
vlan
vlan
isolated value: 1
Isolated PVLAN
community value: 2
Community PVLAN
primary value: 3
Primary PVLAN
non-operational value: 4
Non-operational PVLAN
normal value: 5
normal
pvlan-type
Type: uinteger
associated to primary
primary
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)70
V Show Commandsshow vlan private-vlan type
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 71
V Show Commandsshow vlan private-vlan type
show vlan reservedshow vlan reserved [__readonly__ TABLE_reserved ivusage-vlanid ivusage-desc show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
Internal reserved VLANsreserved
Read Only__readonly__
Internal reserved VLAN table formatTABLE_reserved
Type: uinteger
internal vlan usage VLAN id
ivusage-vlanid
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)72
V Show Commandsshow vlan reserved
Multicast VLAN start value: 1
Multicast VLAN start
Multicast VLAN end value: 2
Multicast VLAN end
Online diagnostics vlan1 value: 3
online diagnostics vlan1
Online diagnostics vlan2 value: 4
online diagnostics vlan2
Online diagnostics vlan3 value: 5
online diagnostics vlan3
Online diagnostics vlan4 value: 6
online diagnostics vlan4
Unused reserved VLAN lower start value: 7
Unused VLAN lower start
Unused reserved VLAN lower end value: 8
Unused VLAN lower end
Satellite VLAN value: 9
Satellite VLAN
Unused reserved VLAN upper start value: 10
Unused VLAN upper start
Unused reserved VLAN upper end value: 11
Unused VLAN upper end
Reserved value: 12
Reserved
ivusage-desc
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 73
V Show Commandsshow vlan reserved
show vlan xbriefshow vlan xbrief [__readonly__ vlanshowbr-hdr TABLE_vlanbriefxbrief vlanshowbr-vlanidvlanshowbr-vlanid-utf vlanshowbr-vlanname vlanshowbr-vlanstate vlanshowbr-shutstate [ vlanshowplist-ifidx ]show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
All VLAN status in briefxbrief
Read Only__readonly__
VLAN brief table formatTABLE_vlanbriefxbrief
Type: uinteger
VLAN brief header
vlanshowbr-hdr
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid
Type: uinteger
VLAN brief VLAN ID
vlanshowbr-vlanid-utf
Type: string
VLAN brief VLAN name
vlanshowbr-vlanname
VLAN brief VLAN state
active value: 1
VLAN Active State
suspend value: 2
VLAN Suspended State
vlanshowbr-vlanstate
VLAN brief shutdown state
shutdown value: 1
VLAN shut state
noshutdown value: 2
VLAN no shut state
vlanshowbr-shutstate
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)74
V Show Commandsshow vlan xbrief
Type: interface-mrange
Port list ifindex
vlanshowplist-ifidx
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 75
V Show Commandsshow vlan xbrief
show vlan xsummaryshow vlan xsummary [__readonly__ vlansum-vtp-vlan vlansum-ext-vlan vlansum-all-vlanvlansum-max-supported-vlan show-end [ true-end ]]
Syntax Description Show running system informationshow
VLAN statusvlan
VLAN summary informationxsummary
Read Only__readonly__
Type: uinteger
Show vlan summary Number of normal vlans
vlansum-vtp-vlan
Type: uinteger
Show vlan summary Number of extended vlans
vlansum-ext-vlan
Type: uinteger
Show vlan summary Total
vlansum-all-vlan
Type: uinteger
Show vlan summary Max supported vlans
vlansum-max-supported-vlan
Type: uinteger
Show vlan end marker
show-end
Type: uinteger
Show vlan end marker
true-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)76
V Show Commandsshow vlan xsummary
show vpc (mcecm)show vpc {vpc-number| brief vpc vpc-number} [__readonly__ [ vpc-hdr ] [ vpc-is-es ] [ vpc-not-es ][TABLE_vpc vpc-id vpc-ifindex vpc-port-state vpc-thru-peerlink vpc-consistency [ vpc-consistency-reason ][ vpc-consistency-status ] up-vlan-bitset es-attr] vpc-end]
Syntax Description Show running system informationshow
Virtual Port Channel configurationvpc
Brief display of vPC statusbrief
Type: integer
min: 1 max: 4096
Enter a Virtual Port Channel number
vpc-number
Read Only__readonly__
Type: string
Start of vPC table
vpc-hdr
Type: string
Flag to indicate vPC+ complex
vpc-is-es
Type: string
Flag to indicate vPC complex
vpc-not-es
vPC tableTABLE_vpc
Type: uinteger
vPC id
vpc-id
Type: string
vPC ifindex
vpc-ifindex
Type: integer
vPC port state
vpc-port-state
Type: integer
vPC Routing through peerlink
vpc-thru-peerlink
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 77
V Show Commandsshow vpc (mcecm)
vPC global configuration consistency
consistent value: 1
vPC global configuration consistent
inconsistent value: 2
vPC global configuration inconsistent
not-applicable value: 3
vPC configuration not applicable
vpc-consistency
Type: string
vPC consistency reason
vpc-consistency-reason
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)78
V Show Commandsshow vpc (mcecm)
vpc-consistency-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 79
V Show Commandsshow vpc (mcecm)
vPC consistency reason
SUCCESS value: 0x00000000
SUCCESS
INVALID value: 0x00000001
INVALID
SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F
SYSERR_MCECM_COMPAT_FAILED
SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025
SYSERR_MCECM_PEER_NOT_CFG
SYSERR_MCECM_MCT_DOWN value: 0x41B7002A
SYSERR_MCECM_MCT_DOWN
SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035
SYSERR_MCECM_MCT_NOT_UP
SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A
SYSERR_MCECM_MCT_DOES_NOT_EXISTS
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS
SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042
SYSERR_MCECM_COMPAT_CHK_NOT_DONE
SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F
SYSERR_MCECM_DOMAIN_COMPAT_FAILED
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH
SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029
SYSERR_PCM_MCEC_LAG_ID_MISMATCH
SYSERR_PCM_INVALID value: 0x402B0004
SYSERR_PCM_INVALID
SYSERR_PCM_INTERNAL value: 0x402B0003
SYSERR_PCM_INTERNAL
SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A
SYSERR_STP_COMPAT_CHECK_FAILURE
SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)80
V Show Commandsshow vpc (mcecm)
SYSERR_SVI_COMPAT_CHECK_FAILURE
SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050
SYSERR_MCECM_TYPE_CHECK_BYPASSED
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH
Type: string
vPC UP VLAN bitset
up-vlan-bitset
Type: string
vPC+ attributes
es-attr
Type: string
End of table
vpc-end
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 81
V Show Commandsshow vpc (mcecm)
show vpc (mcecm)show vpc [brief] [__readonly__ vpc-domain-id [ vpc-l2mp-switch-id ] vpc-peer-status vpc-peer-status-reasonvpc-peer-keepalive-status [ vpc-peer-l2mp-status ] vpc-peer-consistency [ vpc-peer-consistency-reason ][ vpc-per-vlan-peer-consistency ] vpc-peer-consistency-status vpc-type-2-consistency[ vpc-type-2-consistency-reason ] vpc-type-2-consistency-status vpc-role num-of-vpcs [ track-obj ][ peer-gateway ] [ peer-gateway-excluded-vlans ] dual-active-excluded-vlansvpc-graceful-consistency-check-status [ vpc-auto-recovery-status ] [ vpc-scale-high-status ][ fp-enhanced-load-balancing ] [ vpc-per-vlan-peer-consistency ] vpc-peer-link-hdr [TABLE_peerlinkpeer-link-id peerlink-ifindex peer-link-port-state peer-up-vlan-bitset] vpc-end vpc-hdr [ vpc-is-es ] [ vpc-not-es ][TABLE_vpc vpc-id vpc-ifindex vpc-port-state vpc-thru-peerlink vpc-consistency [ vpc-consistency-reason ][ vpc-consistency-status ] up-vlan-bitset es-attr] vpc-end]
Syntax Description Show running system informationshow
Virtual Port Channel configurationvpc
Brief display of vPC statusbrief
Read Only__readonly__
vPC peerlink tableTABLE_peerlink
vPC tableTABLE_vpc
Type: string
vPC domain id
vpc-domain-id
Type: uinteger
vPC+ switch ID
vpc-l2mp-switch-id
vPC peer status
peer-not-configured value: 1
vPC peer-link not configured
peer-not-found value: 2
vPC peer not found
peer-ok value: 3
vPC peer adjacency ok
peer-link-down value: 4
vPC peer link down
vpc-peer-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)82
V Show Commandsshow vpc (mcecm)
vPC peer status reason
SUCCESS value: 0x00000000
SUCCESS
SYSERR_MCECM_PEER_UNRCH value: 0x41B70034
SYSERR_MCECM_PEER_UNRCH
SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F
SYSERR_MCECM_DOMAIN_COMPAT_FAILED
SYSERR_MCECM_ELECTION_ERROR value: 0x41B70037
SYSERR_MCECM_ELECTION_ERROR
SYSERR_MCECM_OOB_NOT_OPERATIONAL value: 0x41B7004D
SYSERR_MCECM_OOB_NOT_OPERATIONAL
vpc-peer-status-reason
vpc peer keepalive status
disabled value: 1
vpc peer keepalive disabled
peer-alive value: 2
vpc peer keepalive received
peer-not-alive value: 3
vpc peer keepalive not received
peer-alive-domain-mismatch value: 4
vpc peer keepalive received,domainID mismatch
suspended value: 5
vpc peer keepalive suspended for ISSU
not-operational value: 6
vpc peer keepalive not operational
suspended-vrf value: 7
vpc peer keepalive suspended: invalid vrf
misconfigured value: 8
vpc peer keepalive misconfigured
vpc-peer-keepalive-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 83
V Show Commandsshow vpc (mcecm)
vPC fabricpath status
unknown value: 0
vpc fabricpath peer is unknown
alive value: 1
vpc peer is reachable through fabricpath network
dead value: 2
vpc peer is unreachable through fabricpath network
vpc-peer-l2mp-status
vPC role
none-established value: 0
no role established
primary value: 2
vPC primary primary
primary-secondary value: 1
vPC primary secondary
secondary-primary value: 3
vPC secondary primary
secondary value: 4
vPC secondary secondary
vpc-role
Type: integer
Peer gateway status
peer-gateway
Type: string
peer-gateway excluded VLANs
peer-gateway-excluded-vlans
Type: string
dual-active excluded VLANs
dual-active-excluded-vlans
Type: integer
Fabricpath enhanced load balancing status
fp-enhanced-load-balancing
Type: string
Number of vPCs configured
num-of-vpcs
Type: string
Track object for vPC
track-obj
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)84
V Show Commandsshow vpc (mcecm)
vPC graceful consistency check
enabled value: 1
vPC graceful consistency check enabled
disabled-user value: 2
vPC graceful check user disabled
disabled-peer value: 3
vPC graceful check peer disabled
vpc-graceful-consistency-check-status
vPC global configuration consistency
consistent value: 1
vPC global configuration consistent
inconsistent value: 2
vPC global configuration inconsistent
not-applicable value: 3
vPC configuration not applicable
vpc-consistency
Type: string
vPC consistency reason
vpc-consistency-reason
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 85
V Show Commandsshow vpc (mcecm)
vpc-consistency-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)86
V Show Commandsshow vpc (mcecm)
vPC consistency reason
SUCCESS value: 0x00000000
SUCCESS
INVALID value: 0x00000001
INVALID
SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F
SYSERR_MCECM_COMPAT_FAILED
SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025
SYSERR_MCECM_PEER_NOT_CFG
SYSERR_MCECM_MCT_DOWN value: 0x41B7002A
SYSERR_MCECM_MCT_DOWN
SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035
SYSERR_MCECM_MCT_NOT_UP
SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A
SYSERR_MCECM_MCT_DOES_NOT_EXISTS
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS
SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042
SYSERR_MCECM_COMPAT_CHK_NOT_DONE
SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F
SYSERR_MCECM_DOMAIN_COMPAT_FAILED
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH
SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029
SYSERR_PCM_MCEC_LAG_ID_MISMATCH
SYSERR_PCM_INVALID value: 0x402B0004
SYSERR_PCM_INVALID
SYSERR_PCM_INTERNAL value: 0x402B0003
SYSERR_PCM_INTERNAL
SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A
SYSERR_STP_COMPAT_CHECK_FAILURE
SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 87
V Show Commandsshow vpc (mcecm)
SYSERR_SVI_COMPAT_CHECK_FAILURE
SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050
SYSERR_MCECM_TYPE_CHECK_BYPASSED
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH
vPC global configuration consistency
consistent value: 1
vPC global configuration consistent
inconsistent value: 2
vPC global configuration inconsistent
not-applicable value: 3
vPC configuration not applicable
vpc-peer-consistency
Type: string
vPC consistency reason
vpc-peer-consistency-reason
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)88
V Show Commandsshow vpc (mcecm)
vpc-peer-consistency-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 89
V Show Commandsshow vpc (mcecm)
vPC consistency reason
SUCCESS value: 0x00000000
SUCCESS
INVALID value: 0x00000001
INVALID
SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F
SYSERR_MCECM_COMPAT_FAILED
SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025
SYSERR_MCECM_PEER_NOT_CFG
SYSERR_MCECM_MCT_DOWN value: 0x41B7002A
SYSERR_MCECM_MCT_DOWN
SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035
SYSERR_MCECM_MCT_NOT_UP
SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A
SYSERR_MCECM_MCT_DOES_NOT_EXISTS
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS
SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042
SYSERR_MCECM_COMPAT_CHK_NOT_DONE
SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F
SYSERR_MCECM_DOMAIN_COMPAT_FAILED
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH
SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029
SYSERR_PCM_MCEC_LAG_ID_MISMATCH
SYSERR_PCM_INVALID value: 0x402B0004
SYSERR_PCM_INVALID
SYSERR_PCM_INTERNAL value: 0x402B0003
SYSERR_PCM_INTERNAL
SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A
SYSERR_STP_COMPAT_CHECK_FAILURE
SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)90
V Show Commandsshow vpc (mcecm)
SYSERR_SVI_COMPAT_CHECK_FAILURE
SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050
SYSERR_MCECM_TYPE_CHECK_BYPASSED
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH
vPC per-vlan global configuration consistency
consistent value: 1
vPC per-vlan global configuration consistent
inconsistent value: 2
vPC per-vlan global configuration inconsistent
vpc-per-vlan-peer-consistency
vPC type-2 configuration consistency status
consistent value: 1
vPC type-2 compat check succeeded
inconsistent value: 2
vPC type-2 compat check failed
vpc-type-2-consistency
Type: string
vPC type-2 configuration consistency reason
vpc-type-2-consistency-reason
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 91
V Show Commandsshow vpc (mcecm)
vpc-type-2-consistency-status
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)92
V Show Commandsshow vpc (mcecm)
vPC type-2 configuration consistency status
SUCCESS value: 0x00000000
SUCCESS
INVALID value: 0x00000001
INVALID
SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F
SYSERR_MCECM_COMPAT_FAILED
SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025
SYSERR_MCECM_PEER_NOT_CFG
SYSERR_MCECM_MCT_DOWN value: 0x41B7002A
SYSERR_MCECM_MCT_DOWN
SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035
SYSERR_MCECM_MCT_NOT_UP
SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A
SYSERR_MCECM_MCT_DOES_NOT_EXISTS
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS
SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042
SYSERR_MCECM_COMPAT_CHK_NOT_DONE
SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F
SYSERR_MCECM_DOMAIN_COMPAT_FAILED
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH
SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029
SYSERR_PCM_MCEC_LAG_ID_MISMATCH
SYSERR_PCM_INVALID value: 0x402B0004
SYSERR_PCM_INVALID
SYSERR_PCM_INTERNAL value: 0x402B0003
SYSERR_PCM_INTERNAL
SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A
SYSERR_STP_COMPAT_CHECK_FAILURE
SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 93
V Show Commandsshow vpc (mcecm)
SYSERR_SVI_COMPAT_CHECK_FAILURE
SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050
SYSERR_MCECM_TYPE_CHECK_BYPASSED
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH
vPC scale high status
enabled value: 1
vPC scale high status enabled
disabled-user value: 2
vPC scale high status user disabled
disabled-peer value: 3
vPC scale high status peer disabled
vpc-scale-high-status
Type: string
Start of vPC table
vpc-hdr
Type: string
Flag to indicate vPC+ complex
vpc-is-es
Type: string
Flag to indicate vPC complex
vpc-not-es
Type: string
Start of vPC peer-link table
vpc-peer-link-hdr
Type: integer
vPC Routing through peerlink
vpc-thru-peerlink
Type: integer
vPC port state
vpc-port-state
Type: string
End of table
vpc-end
Type: uinteger
vPC id
vpc-id
Type: string
vPC ifindex
vpc-ifindex
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)94
V Show Commandsshow vpc (mcecm)
Type: uinteger
peer link id
peer-link-id
Type: string
peer link ifindex
peerlink-ifindex
Type: integer
peer-link port state
peer-link-port-state
Type: string
peer link UP VLAN bitset
peer-up-vlan-bitset
Type: string
vPC UP VLAN bitset
up-vlan-bitset
Type: string
vPC+ attributes
es-attr
Type: string
Auto-recovery status
vpc-auto-recovery-status
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 95
V Show Commandsshow vpc (mcecm)
show vpc consistency-parametersshow vpc consistency-parameters {global| interface if| vpc vpc-num} [__readonly__TABLE_vpc_consistency vpc-param-name vpc-param-type vpc-param-local-val vpc-param-peer-val]
Syntax Description Show running system informationshow
Virtual Port Channel configurationvpc
Show vPC Consistency Parametersconsistency-parameters
Global Parametersglobal
Specify interfaceinterface
Type: integer
min: 1 max: 4096
Enter a Virtual Port Channel number
vpc-num
Read Only__readonly__
vPC tableTABLE_vpc_consistency
Type: stringvpc-param-name
Type: stringvpc-param-type
Type: stringvpc-param-local-val
Type: stringvpc-param-peer-val
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)96
V Show Commandsshow vpc consistency-parameters
show vpc consistency-parameters vlansshow vpc consistency-parameters vlans [__readonly__ TABLE_vpc_consistency vpc-param-namevpc-param-type [ reason_code ] [ syserr ] vpc-pass-vlans [ reason_code ]]
Syntax Description Show running system informationshow
Virtual Port Channel configurationvpc
Show vPC Consistency Parametersconsistency-parameters
vlansvlans
Read Only__readonly__
vPC tableTABLE_vpc_consistency
Type: stringvpc-param-name
Type: stringvpc-param-type
Type: stringvpc-pass-vlans
Type: string
vPC consistency reason
syserr
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 97
V Show Commandsshow vpc consistency-parameters vlans
reason_code
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)98
V Show Commandsshow vpc consistency-parameters vlans
vPC consistency reason
SUCCESS value: 0x00000000
SUCCESS
INVALID value: 0x00000001
INVALID
SYSERR_MCECM_COMPAT_FAILED value: 0x41B7000F
SYSERR_MCECM_COMPAT_FAILED
SYSERR_MCECM_PEER_NOT_CFG value: 0x41B70025
SYSERR_MCECM_PEER_NOT_CFG
SYSERR_MCECM_MCT_DOWN value: 0x41B7002A
SYSERR_MCECM_MCT_DOWN
SYSERR_MCECM_MCT_NOT_UP value: 0x41B70035
SYSERR_MCECM_MCT_NOT_UP
SYSERR_MCECM_MCT_DOES_NOT_EXISTS value: 0x41B7003A
SYSERR_MCECM_MCT_DOES_NOT_EXISTS
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS value: 0x41B7003B
SYSERR_MCECM_MCEC_DOES_NOT_EXISTS
SYSERR_MCECM_COMPAT_CHK_NOT_DONE value: 0x41B70042
SYSERR_MCECM_COMPAT_CHK_NOT_DONE
SYSERR_MCECM_DOMAIN_COMPAT_FAILED value: 0x41B7003F
SYSERR_MCECM_DOMAIN_COMPAT_FAILED
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED value: 0x41B70044
SYSERR_MCECM_GLOBAL_COMPAT_CHK_FAILED
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH value: 0x402B0027
SYSERR_PCM_MCEC_CHANNEL_MODE_MISMATCH
SYSERR_PCM_MCEC_LAG_ID_MISMATCH value: 0x402B0029
SYSERR_PCM_MCEC_LAG_ID_MISMATCH
SYSERR_PCM_INVALID value: 0x402B0004
SYSERR_PCM_INVALID
SYSERR_PCM_INTERNAL value: 0x402B0003
SYSERR_PCM_INTERNAL
SYSERR_STP_COMPAT_CHECK_FAILURE value: 0x40DD003A
SYSERR_STP_COMPAT_CHECK_FAILURE
SYSERR_SVI_COMPAT_CHECK_FAILURE value: 0x410C0021
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 99
V Show Commandsshow vpc consistency-parameters vlans
SYSERR_SVI_COMPAT_CHECK_FAILURE
SYSERR_MCECM_TYPE_CHECK_BYPASSED value: 0x41B70050
SYSERR_MCECM_TYPE_CHECK_BYPASSED
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH value: 0x41B70062
SYSERR_MCECM_LOCAL_PEER_SWITCHID_DOES_NOT_MATCH
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2)100
V Show Commandsshow vpc consistency-parameters vlans
show vpc orphan-portsshow vpc orphan-ports [__readonly__ TABLE_orphan_ports vpc-vlan vpc-orphan-ports]
Syntax Description Show running system informationshow
Virtual Port Channel configurationvpc
Show ports that are not part of vPC but have common VLANsorphan-ports
Read Only__readonly__
vPC orphan ports tableTABLE_orphan_ports
Type: stringvpc-vlan
Type: stringvpc-orphan-ports
Command Modes• /exec
Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 6.1(2)I2(2) 101
V Show Commandsshow vpc orphan-ports
show vpc peer-keepaliveshow vpc peer-keepalive [__readonly__ vpc-peer-keepalive-status vpc-keepalive-destvpc-keepalive-send-interface vpc-keepalive-receive-interface vpc-keepalive-send-tstampvpc-keepalive-receive-tstamp vpc-peer-keepalive-up-time vpc-keepalive-send-status v
top related