U.S. Department of the Interior U.S. Geological Survey Loading Data into ArcHydro Building the Global GeoDatabase.

U.S. Department of the InteriorU.S. Geological Survey

Loading Data into ArcHydro

Building the Global GeoDatabase

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-2

Directory Structure

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-3

Global Network

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-4

Global Data Sets• All in Global.mdb geodatabase• hucpoly (tile boundaries)• streams (network to connect tiles)• hucpoints (outlets for tile polys)

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-5

Step 1: Create Empty Geodatabase

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-6

Step 2: Import data• First import a data set covering

ENTIRE area, i.e. all HUCs you plan to use

• This sets up the maximum spatial extent we can put into the “feature dataset”

• Make sure this data set at least covers the full desired extent

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-7

The Import Coverage Tool

Type in “Layers here

click

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-8

click

Don’ttouch!

Set to areasonable

value

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-9

Building Global hucpoly

• Ideally no overlaps or gaps• Should be derived from fdr by

delineation• Start by delineating from outlet of

each HUC• Convert to a grid

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-10

Building Global hucpoly (continued)

• Remove overlaps at top of non-headwaters HUCs via map algebra

• Convert to a shapefile hucshp in huc folder

• When finished, load shapefiles into global hucpoly feature class

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-11

Building the hucpoint feature class

• These basically are the outlet points for each HUC

• You need one for each HUC, including the HUC furthest downstream

• Build these in ArcMap Editor

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-12

Building the Global Network• Must build a Geometric Network of

streams• Just need mainstem streams needed

to connect our data tiles (8-digit HUCs)

• Coastal streams, and any stream not connecting an upstream HUC can be deleted

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-13

Geometric Network Wizard• Build from existing features• Use hucpoint and streams feature classes• Name network HUC_Net• Build complex edges from streams feature

class• Use 2-m snap tolerance, both sets of

features• Include sources and sinks on hucpoints• Do not assign weights

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-14

Set Flow Directions on Network

• Select outlet hucpoint• Set Ancillary Role to Sink• Click Set Flow Direction button on

Utility Network Analyst Toolbar• Or if streams from NHD, use

ArcHydro Tools, set flow opposite feature directions

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-15

Assign HydroID’s

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-16

Make Relationship Class HUCHasJunction

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-17

Make Relationship Class HUCHasJunction

StreamStats Data Prep Workshop Oct 21-22, 2003 Page 4-18

Store Area Outlets

• ArcHydro Tools Toolbar

• Attribute Tools pulldown

• Or assignmanually