UMPS P LOWMETERS F NSTRUMENTATION I ACKING P …...4 PLASTIC SHEET & ROD 119 PIPE F ITTINGS V ALVES S HEET R OD T ANKS F LEXIBLE TUBING I NSTADUCT FRP G RATING S CRUBBER PACKING I

4

PLASTIC SHEET & ROD

119www.fabcoplastics.com

PiPe | Fittings | ValVes | sheet | Rod | tanks | Flexible tubing | instaduct | FRP gRating | scRubbeR Packing | instRumentation | FlowmeteRs | PumPs

PVC Type I SheetSimona® PVC Type I Sheet

Notes:• Meets ASTM D-1784-81 Type I Grade I Class 12454. • Meets Federal Specification L-P 535e. • Meets UL 94V-0,94-5V Flammability rating. • Meets ASTM E 84 Flame Spread Rate 15, Fuel Contribution 0. (White Only)• Maximum application temperature +140°F. • Custom lengths, sizes, colors and special requirements available upon request.• Gray PVC Sheet has no protective foil.• White PVC Sheet has one side protective foil.• * refers to items that are non-stock. Minimum orders and long leadtimes may be encountered.

SIMONA® PVC Type I sheet is extruded to exacting specification for normal impact applications. This type of sheet has excellent corrosion resistance, very good dielectric properties, low moisture absorption, high rigidity, good abrasion resistance and excellent weathering properties. The material is also self-extinguishing.

Features:• Normal Impact • Excellent chemical and corrosion

resistance • Easily to fabricate, weld or machine • Showcase quality surface • Stress relieved, square, flat sheets • Accurate to dimensional tolerances • Color consistent

Applications:• Chemical processing • Semiconductor processing

equipment • Pollution control equipment • Machined and fabricated parts • Etching and plating tanks • Scrubbers, hoods, ducts and other

protective equipment

PART NUMBER

THICKNESS (IN)

WEIGHT PER SHEET (LBS)

OTHER DETAILS

WHITE 96X48, MASKED 1 SIDE10017213 0.125 29.34

High Shine

10017215 0.25 58.68

10017216 0.375 88.02

10017217 0.5 117.37

WHITE 96X48, MASKED 2 SIDES10017285 0.75 176.05

10017286 1 234.73

DARK GREY 96X48, UNMASKED10025866 0.062 14.56 SAI

10025867 0.093 21.83 SAI

10025868 0.125 29.34 SAI

10025869 0.187 43.9 SAI

10025870 0.25 58.68 SAI

10025871 0.375 88.02 SAI

10025872 0.5 117.37 SAI

10025873 0.625 146.71 SAI

10025874 0.75 176.05 SAI

10025875 1 234.73 SAI

10030754 1.125 265.14 BOL

10018291 1.25 293.41 SAG

10031283 1.25 285.11 BOL

10018292 1.5 352.1 SAI

10030744 1.5 368.72 BOL

10031240 1.5 378.23 BOL

10030745 1.75 427.48 BOL

10030746 2 468.23 BOL

10030747 2.25 544.99 BOL

10030748 2.5 610.68 BOL

10030749 2.75 669.43 BOL

10030750 3 728.19 BOL

10030751 3.5 845.7 BOL

10030752 4 974.78 BOL

DARK GREY 78X39, UNMASKED30000981 1.575 255.73 SAG

10018671 2 315.83 SAG

DARK GREY 120X48, UNMASKED10017237 0.062 18.2 SAI

10017238 0.125 36.68 SAI

10017239 0.187 54.87 SAI

10017240 0.25 73.35 SAI

10017241 0.375 110.03 SAI

10017242 0.5 146.71 SAI

10017243 1 293.41 SAI

SIMONA® PVC TYPE I SHEET TECHNICAL DATASIMONA® VERSADUR® PVC TYPE I TEST METHOD UNIT TYPICAL VALUE

PHYSICALDensity ASTM D-792 g/cc 1.41

Water Absorption (24 hrs @ 73 °F) ASTM D-570 % <0.02

MECHANICALTensile Strength @ Yield ASTM D-638 PSI 9000

Tensile Modulus ASTM D-638 PSI 486,000Izod Impact ASTM D-256 ft. lbs./in. 0.8

Hardness, Shore D ASTM D-2240 84

THERMALHeat Distortion Temperature at 264 psi ASTM D-648 °F 154

Coefficient of Thermal Expansion ASTM D-696 in./in., °Fmm/mm, °C

4.4 x 10-5

(8.0 x 10-5)Temperature Range °F +32 to +140

FLAMMABILITYFlammability D-635 self-

extinguishingUL 94 V-0, 5V