The Mini Golf Project. Teen Spirit Salman Bo Holaiqa Ahmad Aidarous Abdulaziz Alhothi Ahmad Al-Kuwari.

The Mini Golf Project

Teen Spirit Salman Bo Holaiqa Ahmad Aidarous Abdulaziz Alhothi Ahmad Al-Kuwari

Introduction

Our team discussed and agreed to design four balls using distinctive materials and examine each ball’s functionality to determine the ball that can adapt the condition of the replica (mini-golf).

Goals :- Design a perfect replica that can

provide the needed conditions to ease the ball’s pathway.

Making a small business by developing the mini-golf gameplay , in the process of financial investments.

Scientific Concepts :--COR : Coefficient Of Restitution formula: √rebound/drop height

-Friction: which is the contact between the ball and the surface area used.

-Impact: collision of the ball against the floor.

Materials Used:- Rubber bands Superglue Two surfaces : 1-Green carpet 2-felt Cotton Cartoon tube Metal Rod Wooden Barrier Rulers

1-Ball “Bo Hulaiqa” The ball is filled with 100% cotton and

covered with glue with rubber bands.

Results:-1-the ball doesn’t bounce2-the ball doesn’t reach the first surface3-the ball doesn’t reach the second

surface

Reason: too heavy to bounce off the barrier

2- Ball “Alkuwari” The ball is filled with 5 rubbers inside

and covered with around 30 rubber bands.

Results:--The ball bounced off the barrier-The ball reached the first surface -The ball failed to reach the second

surface.

Reason : the ball needed more weight to go through the rough surfaces

3- Ball “Aidrous”The ball is filled with glue and wrapped by tape and rubber bands

Results:1-the ball bounced off the barrier 2-the ball reached the first surface3-the ball reached the second surface

Reason : It had the Ideal weight and the bouncy features for the ball to fulfill the conditions.

4- Ball “Alhothi” The ball is filled with 50% cotton and

covered with rubber bands

Results: 1-the ball bounced off the barrier 2-the ball reached the first surface 3-the ball reached the second surface

Reason : It had the Ideal weight and the bouncy features for the ball to fulfill the conditions.

Conclusion The distance that the ball reaches

depends on the material used inside and outside the ball.

Increasing the weight of the ball stabilizes the ball through rough surfaces.

Covering the ball with rubber bands makes it bouncier.

Special Thanks to:- Dr.Chang Dr.Matthew All the supervisors from Qatar University Mr.Emad Aboyousef (our physics coordinator) And to all the participants in the material science program.