The Fits -All mount

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The Fits-All mountTMHaltof Product Design, inc.

This presentation was part of our Fits-ALL kiosk at

CES 2008.

The slides that follow describe how the Fits-ALL universal bracket was installed on the

kiosk dash.

Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The

INSTALL ANY DASH-MOUNTED DEVICE, IN ANY VEHICLE

USING JUST THIS ONE BRACKET!

-

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

Any device, bolted to any dash, WITH NO VISIBLE HOLES!

The Fits-All mountTMHaltof Product Design, inc.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

That can be removed, WITHOUT LEAVING A TRACE!

The Fits-All mountTMHaltof Product Design, inc.

See…, No holes, No glue residue, Just a good-as-new dash!

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The Fits-All mountTMHaltof Product Design, inc.

So, how can just ONE bracket, mount ANY dash-mount-able device,

to ANY dash location, on ANY vehicle dashboard?

It will take less than 2 minutes to find out, so please stay tuned.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

FIRST, remove dash trim panel, and fold it down.

PULL herePULL here

The Fits-All mountTMHaltof Product Design, inc.

Go ahead, gently pull the dash trim panel out, and fold it down!Thank you!

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

Mounting locations can now be found INSIDE the dash.

The Fits-All mountTMHaltof Product Design, inc.

The Fits-All can be modified to fit almost anywhere on the dash using the included Prototyping Templates.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

Find a good location for the bracket, usually next to the edge of the dash trim panel.

Prototyping Template

Bend and cut the Prototyping Template to line-up with available screws and mounting surfaces.

The Fits-All mountTMHaltof Product Design, inc.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The Fits-All mountTMHaltof Product Design, inc.

Transfer the bend and cut line to the bracket. Position the Metal Benders 1/16” on either side of the bend line.

The bracket in now easily bent, and adjusted, even while sitting in the vehicle.

Continue until the bracket matches the Prototyping Template.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

Install the Bracket that has been modified to match the Template.

Modified Fits-All mount

The Fits-All mountTMHaltof Product Design, inc.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

Replace the trim panel and you are ready to mount your device.

The Fits-All mountTMHaltof Product Design, inc.

Please replace the trim panel now.

Thank you!

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

Your new device may now be attached using its mounting cradle.

The Fits-All mountTMHaltof Product Design, inc.

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The Fits-All mountTMHaltof Product Design, inc.

Thank you for your interest in our product.

See the innovative product package that includes 2 Prototyping Templates.

More information can be found on the Product page of our web site:

www.haltof.com

A .pdf file of the Fits-ALL brochure is also available.

Thanks again for your time.Click on this slide to see the presentation again.

Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The

INSTALL ANY DASH-MOUNTED DEVICE, IN ANY VEHICLE

USING JUST THIS ONE BRACKET!

The Fits-All mountTM

UNIVERSAL ELECTRONICS MOUNTING BRACKET

The Fits-All mountTMHaltof Product Design, inc.