Technical Data ISF Select Series - Interflux Electronicsinterflux.com/sites/default/files/documents/en/ICSF-Select.pdfTechnical Data ISF-Select Series Interflux Singapore Pte Ltd ...

Technical Data

ICSF-Select Series

Selective Jet Fluxing

Flux Savings up to 95%

Flux Solid Content up to 40%

Easy Programming

J E T F LU X I N G WAV E S O L D E R I N G

www.interflux.com

Page 1

Technical Data ICSF-Select Series

SELECTIVE JET FLUXER

Benefits

70 to 95% flux savings compared with Conventional

Spray Fluxing.

Very low maintenance.

No external air supply required.

High speed XY movement

Sensitive areas can be programmed to achieve good flux

hole penetration without affecting the residue level of

Key Features

Flux Detection :

Each drop of flux will be monitored

during flux jetting process.

Auto Purge Function :

Fully automatic, without operator

supervision.

Board detection :

A Programmable Ultrasonic Board

Detection Sensor gives a smooth stop

of the PCB with a 2 step action.

Software Optimizer :

This standard software function helps

the operator/engineer to program the

best possible cycle time.

Flux Pump :

The use of a flux pump allows flux top

up while running production and each

PCB can be programmed with a differ-

ent flux jet pressure.

Cycle Time :

The use of servo motors allows speeds

up to 1,500 mm/s to guarantee cycle

times suitable for wave soldering. A

special welded frame with an extra

heavy base plate secures the stability

and best performance possible.

www.interflux.com

Page 2

Technical Data ICSF-Select Series

Interflux Singapore Pte Ltd

2 Kallang Pudding Road #04-12,

Mactech Building, Singapore 349307

www.interflux.sg

Email : enquiry@interflux.com.sg

Tel : +65 68487818

Specifications

ICSF-Select6 ICSF-Select4

Nozzles One Jet Nozzle (optional 2)

Nozzle Movement Servo, max speed 1,500 mm/s, accuracy ±0.1 mm

Nozzle Movement Area 610 by 610mm 410 by 410mm

Flux pump Pump with brushless DC motor

Flux Drop Size Control High speed solenoid valve, Minimum Pulse 2ms

Flux Flow Control Flux pump with feedback

Power Supply Single phase 220 VAC, 50/60 Hz, 300W

PCB position sensor Ultrasonic, position programmable for each PCB

Outgoing PCB sensor Photo electric

Incoming PCB sensor Photo electric

Conveyor Speed Control Encoder with conveyor speed Calibration + stepper motor,

Conveyor width control Stepper motor with limit switches

Flux Low Level switch Yes (optional 2)

No of flux supply modules One (2 or 6 liters flux Tank), optional 2 Tanks

Emergency stop Yes (2 locations)

Tower light Yes (3 colours)

Controls PLC

Flux Drop Size settings PC , by setting Pulse time, Pulse quantity and pressure

Flux Droplet Control Standard with laser sensor, continuous Flux control

Programming PC, Off-line

Modes of operation Selective (dots, lines, multi-lines and areas)

Selective selection PCB Picture on PC

Recipes Unlimited

Alarms & Events Yes

Conveyor 3 mm stainless steel pin conveyor

SMEMA handshake Standard, up-stream and down-stream

Trending & data logging Optional

Operator security Yes (multiple levels)

Automatic Purge Flux purging system controlled by laser sensor

Barcode reader Optional, Handheld or Fixed Inline to auto-download programs

Exhaust Diameter 100 mm

Exhaust Volume 150 m³/h

Flux Quantity Standard tool to measure the flux quantity used per PCB

Dimensions

Stand Alone L : 1000, W : 1270, H : 1100 mm L : 850, W : 1270, H : 1100 mm

Flux Sensor

Jet Nozzle

Software

www.interflux.com

Distributor Details

J E T F LU X I N G WAVE SOLDERING MADE EASY AND CLEAN

A true Pioneer

Responsible & durable

Support worldwide

www.interflux.com

Environmental friendly

Up to 95% less flux usage

Less maintenance chemicals

Longer life of PCB carriers/pallets

Tremendous reduction in flux fumes

going into the exhaust/environment

Solderability Performance

The ability to program points, lines, multi-lines, areas allows the engi-

neer to decide how much flux is required for certain solder joints up to

complete areas. This capability opens up the process window without

risking excess of flux residues. Thanks to the XY-movement speed up to

1,500 mm/s, the cycle time will be up to the standard required for wave

soldering mass production.