Supervisors_and_Managers_Safety_Audit_Training v.3.3.ppt

August 8, 2007 Version 3.3 1

Introduction to DuPont Safety Principles

&PPD Safety Audit Program

“You get the level of safetythat you demonstrate you

want.”

(DuPont Proverb)

Outline Principles of DuPont’s approach to

safety Overview of PPD’s Audit Program Details of PPD’s Audit Program Forms and examples

DuPont core belief

All injuries can be prevented

Benefits of Good Safety Management

Reduction in the cost of medical and workers’ compensation

Greater productivity Improved product or research

quality Overall operation improvement

Basic Principles of Good Safety Management

Management Commitment Documented Safety Philosophy Safety Goals and Objectives Committee Organization for Safety Line Responsibility for Safety Supportive Safety Staff

Basic Principles of Good Safety Management

(cont’d) Rules and Procedures Audits Safety Communications Safety Training Accident Investigations Motivation

DuPont’s Experience A ten-year study of all serious

injuries occurring across all Du Pont sites showed that: 96% of the injuries resulted from the

unsafe acts of people or from poor work practices

Only 4% of the injuries resulted from unsafe conditions

DuPont’s Expectations for Safety Performance

Employees must: Make safety equal to all other aspects

of the job [and in PPD, safety is #1] Follow all safety rules and procedures

Management must: Accept responsibility for prevention of

injuries Accept responsibility for safety training

Supervisor’s Responsibilities Know, communicate, and enforce

existing standards Recognize the need for revised

standards Develop new procedures and rules

when necessary Train employees to follow all rules

and procedures

ES&H Responsibilities Serve as advisors when addressing

supervisors’ questions arising from audits

Perform audits as a crosscheck of the audits conducted by line management

Help to address safety issues uncovered in audits

Compile, analyze and disseminate data collected from the audits

Overview of PPD’s Audit Program

PPD’s Audit Program An opportunity to spend a few

minutes observing activities in the workplace and then discuss what you’ve seen with your employees

This is done with an eye towards safe, and unsafe, behavior

Mitigate hazards Record observations

Proposed auditing in AD areas during the shutdown

The main focus of today’s training is the situation where a supervisor is auditing his or her people in their normal work areas

It is likely that PPD supervisors will be asked to conduct safety audits of their people who are working in Accelerator Division areas during the shutdown

Audits in AD areas will be conducted in a similar fashion to those in PPD areas

FatalitiesLost Time InjuriesMedical Treatment

First-Aid Cases

Unsafe ActsUnsafe

Conditions

Inspection versus

Things Passive Experts (them) Negative Document / Follow up

Audit People Interactive (I care) Everyone (us) Positive & Negative Document / Follow

DuPont’s nomenclature

Purpose of PPD’s Safety Audit

Identify safe and unsafe, acts or conditions

Identify areas for improvement Follow up when mitigating actions are

indicated Accumulate data for tracking trends

related to safety

Types of safety audits Scheduled Unannounced Compliance with

standards Adherence to

procedures

Benefits of safety audits

Promote safe behavior Test for compliance with

standards Establish standards Identify weaknesses Accumulate data Prevent injuries

Who conducts PPD safety audits? Division Office Department Heads Group Leaders Supervisors ES&H Staff Project Management

Proposed frequency of audits

Division Office – Quarterly Department Heads, Level

1 Project Managers – Quarterly

Group Leaders, Level 2 Project Managers – Monthly

ES&H Staff – Monthly Supervisors, Level 3

Project Managers – Weekly

Where are audits conducted? Wherever your employees are working Group work areas Individual work spaces

Auditing

Focus on one or two activities

One location or portion of a building

One or two processes

Plan for a duration of an hour or less

Details of PPD’s Audit Program

Elements of our Safety Audit Process

Read the Audit Checklist prior to the walkthrough

Visit the work area and talk with employees (without paperwork in hand)

Mitigate any unsafe situation After the walkthrough: Complete the

checklist and the Audit Form Follow up, if necessary

What to look for during an audit

Reactions of people Positions of people Personal Protective Equipment

(PPE) Tools and equipment Procedures Housekeeping

What to look for during an audit (cont.)

Reactions of people Does anyone adjust PPE, change position, or

rearrange job when the safety auditor appears? Does anyone abruptly stop work, attach

grounds, or perform LOTO?

Positions of people Is anyone in danger of injuring himself by

pulling or lifting heavy objects? Is anyone in a position where he or she could

fall, be trapped, collide with anything, or be hit?

Personal Protective Equipment (PPE) Are employees using the required protective

equipment? Are they using the PPE properly? If not, why not? Is the PPE inconvenient to

obtain or hampering the job in some way?

Tools and equipment Are they being used properly? Are they in safe condition? Are homemade tools (not properly

designed) being used? Procedures

Are they adequate? Do they prevent allunnecessary risks?

Are they followed?

Housekeeping Is the workplace neat? Are things put away properly?

Safety Audit Checklist Safety Audit

Checklist Handout

The Safety Audit Form

The Safety Audit FormPotential Injury Severity

Severe Moderate Minor

Broken bones, dismemberment, fatality

Abrasions, cuts, injuries requiring more than first aid

First aid

When Someone is Working Unsafely

Observe; then get the person’s attention

Comment on what the employee was doing safely

Discuss with the employee The possible consequences of the

unsafe act Safer way to do the job

When Someone is Working Unsafely (cont’d)

Get the employee's agreement to work safely in the future

Discuss other safety issues of the job Ask the employee what you the

supervisor could do to make the employee’s job safer

Thank the employee

Audit Examples

Audit Example

Audit Examples

What happens to the safety audit sheets?

PPD/ES&H ESHTRK Statistics

Unsafe Acts (UA) per Audit Hour (AH) for First Year of Audit Program

1 2 3 4 5 6 7 8 9 10 11 12

Conclusion All injuries can be prevented Management is responsible for preventing

injuries Working safely is a condition of employment Training employees to work safely is

essential Prevention of personal injuries is good

business (and good science!) Audits can play a key role in safety And, once again …

PPD’s Audit Program An opportunity to spend a few

minutes observing activities in the workplace and then discuss what you’ve seen with your employees

This is done with an eye towards safe, and unsafe, behavior

Mitigate hazards Record observations

Supervisors_and_Managers_Safety_Audit_Training v.3.3.ppt

Documents

3.3 Propiedades del concreto endurecido1.ppt

8-Bit, 250 MSPS 3.3 V A/D Converter AD9480...AVDD = 3.3 V,.....

2GB , 3.3 V, High Reliability e.MMC Flash

3.3 Energy Efficient Lighting Systems Ppt-Ak.khanra

NB7L86A - 2.5 V/3.3 V SiGe Differential Smart Gate with ...

PPT KD 3.3

SN65HVD23x 3.3-V CAN Bus Transceivers datasheet (Rev. H) ·...

Distributed by: 1-800-831-4242 Jameco Part ... ·...

3.3 complicaciones crónicas, dra v. tapia

TS5A23160 5-V/3.3-V2-CHANNEL2:1 …

CDCLVC11xx 3.3-V and 2.5-V LVCMOS High-Performance Clock ...

SC28L194 Quad UART for 3.3 V and 5 V supply voltagePhilips.....

V&V of models - ppt

PPT OCD 3.3

0.5 dB LSB, 6-Bit, Silicon Digital Attenuator, 100 MHz to...

SCES639D –JANUARY 2007–REVISED MARCH 2017 TXB0101...