Transcript
7/29/2019 SmartPTT Deployment Guide
1/112
SmartPTT Advanced
Deployment Guide
7/29/2019 SmartPTT Deployment Guide
2/112
SmartPTT Advanced
This Guide shows step-by-step the process of
SmartPTT Advanced deployment and includes 5
major stages:
SmartPTT Software Installation
MotoTRBO Radios Programming
Base Radio Programming
Subscriber Radio Programming
SmartPTT Cable Preparation SmartPTT Radioserver Configuration
SmartPTT Dispatcher Configuration
7/29/2019 SmartPTT Deployment Guide
3/112
SMARTPTT SOFTWARE
INSTALLATION
7/29/2019 SmartPTT Deployment Guide
4/112
SmartPTT Software Installation
Before you start with software installation:
1. If you have downloaded SmartPTT Advanced
distribution kit from our website
http://www.smartptt.com/ or one of websites of
our partners, unpack it to the separate folder,so you see the folder structure similar as on
next page.
2. If you get SmartPTT Advanced distribution kit
on CD, please insert it in CD-ROM. The
installation process should start automatically,
so you can skip the first step.
http://www.smartptt.com/http://www.smartptt.com/7/29/2019 SmartPTT Deployment Guide
5/112
Run autorun.exe
7/29/2019 SmartPTT Deployment Guide
6/112
In appeared window click on
Install SmartPTT Radioserveritem
7/29/2019 SmartPTT Deployment Guide
7/112
Click on Next > button
7/29/2019 SmartPTT Deployment Guide
8/112
Enter your credits and click onNext > button
7/29/2019 SmartPTT Deployment Guide
9/112
You can change the destination folder.But it is recommended to setup in defaultfolder.Click on Next > button.
7/29/2019 SmartPTT Deployment Guide
10/112
Microsoft SQL Server is used by SmartPTT Radioserver to log all
events data. This feature is optional at Radioserver and isturned off by default.
7/29/2019 SmartPTT Deployment Guide
11/112
Click on Install button
7/29/2019 SmartPTT Deployment Guide
12/112
After the installation iscompleted, click on Finish
button
7/29/2019 SmartPTT Deployment Guide
13/112
Now select Install SmartPTTDispatcher item
7/29/2019 SmartPTT Deployment Guide
14/112
Click on Next > button
7/29/2019 SmartPTT Deployment Guide
15/112
Enter your credits and click onNext > button
7/29/2019 SmartPTT Deployment Guide
16/112
You can change the destinationfolder. But it is recommended tosetup in default folder.Click on Next > button.
7/29/2019 SmartPTT Deployment Guide
17/112
Microsoft SQL Server is required for SmartPTTdispatcher console. If you dont already haveinstalled instance of SQL Server make sure toinstall SQL Express together with thedispatcher console.
7/29/2019 SmartPTT Deployment Guide
18/112
Click on Install button
7/29/2019 SmartPTT Deployment Guide
19/112
After the installation iscompleted, click on Finishbutton
7/29/2019 SmartPTT Deployment Guide
20/112
MOTOTRBO RADIOS
PROGRAMMING
7/29/2019 SmartPTT Deployment Guide
21/112
Base Radio Programming
Please connect to PC via a programming cable(item PMKN4016) your radio, which is going to
be used as base radio.
Then run MotoTRBO Customer Programming
Software (CPS).
7/29/2019 SmartPTT Deployment Guide
22/112
Click Read to read configuration
from the radio
7/29/2019 SmartPTT Deployment Guide
23/112
Select View menu item
7/29/2019 SmartPTT Deployment Guide
24/112
Select Expert menu item to gainaccess to all possibleconfiguration parameters
7/29/2019 SmartPTT Deployment Guide
25/112
Review the tab Device Information toensure that firmware version is no olderthan R01.04.00. Otherwise contact the
supplier to request a firmware upgrade.
7/29/2019 SmartPTT Deployment Guide
26/112
Switch to General Settings tab
7/29/2019 SmartPTT Deployment Guide
27/112
Set the Radio ID. This ID numbermust be unique for each radio inthe communication system.
7/29/2019 SmartPTT Deployment Guide
28/112
Switch to Accessories tab
7/29/2019 SmartPTT Deployment Guide
29/112
Click here to change Cable Type
7/29/2019 SmartPTT Deployment Guide
30/112
Select Rear PC & Audio item
7/29/2019 SmartPTT Deployment Guide
31/112
Switch to Networktab
7/29/2019 SmartPTT Deployment Guide
32/112
Enable Forward to PC check-box soall messages received by the baseradio are forwarded to theradioserver
7/29/2019 SmartPTT Deployment Guide
33/112
Open the tab Contacts, right-click the tab Digital
7/29/2019 SmartPTT Deployment Guide
34/112
Add All Call. This contact will beused by the dispatcher to call allsubscribers covered by thenetwork.
7/29/2019 SmartPTT Deployment Guide
35/112
You can rename contact toAll Call
for your convenience
7/29/2019 SmartPTT Deployment Guide
36/112
Add to the contact list subscribergroups which are planned to becreated in the system and which mustbe serviced by the dispatcher. Set aunique ID for each group.
Group ID is not related to radio IDs and can have the same values(e.g. 1 and 2 in our example). All call ID is 16777215 and cannot bechanged.
7/29/2019 SmartPTT Deployment Guide
37/112
Switch to an available list in thearea RX Group Lists
7/29/2019 SmartPTT Deployment Guide
38/112
Add created groups from theAvailable to the Members list.
7/29/2019 SmartPTT Deployment Guide
39/112
Create a necessary number of channels on
Channels tab. Click on channel to open channelconfiguration page.
7/29/2019 SmartPTT Deployment Guide
40/112
Set required RX and TXfrequencies for this channel
7/29/2019 SmartPTT Deployment Guide
41/112
Set Group List option to a list ofgroups in which the dispatcher is
included
7/29/2019 SmartPTT Deployment Guide
42/112
Repeat the configurationprocedure for each created
channel
7/29/2019 SmartPTT Deployment Guide
43/112
Click Write to write configurationback to mobile radio when you aredone.Then close the configuration file.
Subscriber Radio Programming
7/29/2019 SmartPTT Deployment Guide
44/112
Subscriber Radio Programming
Now disconnect your base radio from PC.
Connect radio that intended to be used by
subscriber.
7/29/2019 SmartPTT Deployment Guide
45/112
Click Read to read configuration
from the radio
7/29/2019 SmartPTT Deployment Guide
46/112
It is recommended for the subscriberradio to have the same firmware versionas the base radio.
7/29/2019 SmartPTT Deployment Guide
47/112
Switch to General settings tab
7/29/2019 SmartPTT Deployment Guide
48/112
Set the Radio ID. It must be
unique for each radio in thecommunication system.
7/29/2019 SmartPTT Deployment Guide
49/112
For example enter 4
7/29/2019 SmartPTT Deployment Guide
50/112
Enable GPS to track thesubscriber location
7/29/2019 SmartPTT Deployment Guide
51/112
Switch to Networktab
7/29/2019 SmartPTT Deployment Guide
52/112
Set ARS Radio ID in accordancewith the base radio ID (1 in ourcase)
7/29/2019 SmartPTT Deployment Guide
53/112
Set TMS Radio ID in accordancewith the base radio ID (1 in our
case)
7/29/2019 SmartPTT Deployment Guide
54/112
Open the tab Contacts, right clickthe tab Digital
7/29/2019 SmartPTT Deployment Guide
55/112
Add Group Call for each groupwhere the subscriber basestation will be included.
7/29/2019 SmartPTT Deployment Guide
56/112
Set appropriate Group ID for
each group
7/29/2019 SmartPTT Deployment Guide
57/112
Switch to an available digital listin the group RX Group Lists
7/29/2019 SmartPTT Deployment Guide
58/112
Move created groups fromAvailable to Members list
7/29/2019 SmartPTT Deployment Guide
59/112
Create a necessary number of
channels on Channels tab. Thenclick any of them to open thechannel configuration page.
7/29/2019 SmartPTT Deployment Guide
60/112
Enable ARS
7/29/2019 SmartPTT Deployment Guide
61/112
Set required RX and TXfrequencies for this channel
7/29/2019 SmartPTT Deployment Guide
62/112
Set Group list to a list of groupswhere the subscriber is included
7/29/2019 SmartPTT Deployment Guide
63/112
Set Contact Name to one ofpreviously created digitalcontacts, e.g. Group1
7/29/2019 SmartPTT Deployment Guide
64/112
Repeat the configuration
procedure for each createdsubscriber channel
7/29/2019 SmartPTT Deployment Guide
65/112
Click Write to write theconfiguration back to radio
7/29/2019 SmartPTT Deployment Guide
66/112
SMARTPTT CABLE
PREPARATIONMotoTRBO radio is connected to the radioserver via a
special cable, which must be capable to manage radio
and transfer voice and data.
SmartPTT Cable Preparation
7/29/2019 SmartPTT Deployment Guide
67/112
There are two options how to make this cable. You will
receive the same features using both types of cable, soplease select the most convenient way for you. You should
download the instructions from Download section of our
website.
1. Use MotoTRBO Programming Rear Accessory Cable(item PMKN4016). This cable enables radio
management and digital data transfer. To transfer voice
data, an additional adapter is required, connecting a
DB-25 connector of PMKN4016 cable and PC sound
card.
2. Make your own cable using MotoTRBO Rear
Accessory Connector (item PMLN5072).
SmartPTT Cable Types
http://smartptt.com/en/demo_version.htmlhttp://smartptt.com/en/demo_version.html7/29/2019 SmartPTT Deployment Guide
68/112
SmartPTT cable made from
MotoTRBO Programming Rear
Accessory Cable (item PMKN4016)
SmartPTT cable made from
MotoTRBO Rear Accessory
Connector (item PMLN5072)
7/29/2019 SmartPTT Deployment Guide
69/112
SMARTPTT
RADIOSERVERCONFIGURATION
Radioserver Configuration
7/29/2019 SmartPTT Deployment Guide
70/112
Please connect base radio to PC with
SmartPTT Radioserver using the cable youprepared on previous stage.
Run Radioserver Configurator using shortcut
on your Desktop or from Start menu(SmartPTTRadioserver Configurator).
7/29/2019 SmartPTT Deployment Guide
71/112
Switch to Licenses tab
7/29/2019 SmartPTT Deployment Guide
72/112
Click Install Licenses button
7/29/2019 SmartPTT Deployment Guide
73/112
Select the license you have
7/29/2019 SmartPTT Deployment Guide
74/112
Make sure that license hasnot expired. Review the listof available additionalfeatures.
7/29/2019 SmartPTT Deployment Guide
75/112
Add the record for ControlStation base radioconnected to RadioserverPC by means of USB +Audio Cable describedbefore (Right click onControl Stations item)
7/29/2019 SmartPTT Deployment Guide
76/112
Make sure that it is Active
7/29/2019 SmartPTT Deployment Guide
77/112
IP and ID settings mustcorrespond to IP addressand Radio ID programmedat the base radio by CPS
7/29/2019 SmartPTT Deployment Guide
78/112
Switch to Channels tab
7/29/2019 SmartPTT Deployment Guide
79/112
Add all channels which were setup in the base radio
7/29/2019 SmartPTT Deployment Guide
80/112
For your convenience youcan change the alias of anychannel
7/29/2019 SmartPTT Deployment Guide
81/112
Enter Zone number (firstzone in the list in CPS is 1)
7/29/2019 SmartPTT Deployment Guide
82/112
Enter appropriate Channelnumber (first channel in listin CPS is 1)
7/29/2019 SmartPTT Deployment Guide
83/112
Switch to Groups tab
7/29/2019 SmartPTT Deployment Guide
84/112
Enter all contacts that were addedin the base radio
7/29/2019 SmartPTT Deployment Guide
85/112
Switch to Audio tab
7/29/2019 SmartPTT Deployment Guide
86/112
Set Audio Input to sounddevice which base radio'saudio outputis connected to
7/29/2019 SmartPTT Deployment Guide
87/112
Change Input Line to line whichbase radio is connected to
7/29/2019 SmartPTT Deployment Guide
88/112
Set Audio Output to sounddevice which base radio's
audio inputis connected to
7/29/2019 SmartPTT Deployment Guide
89/112
Click Save button to saveconfiguration
7/29/2019 SmartPTT Deployment Guide
90/112
Click Start to start service
7/29/2019 SmartPTT Deployment Guide
91/112
SMARTPTT
DISPATCHERCONFIGURATION
Dispatcher Configuration
Run SmartPTT Dispatcher using the shortcut
7/29/2019 SmartPTT Deployment Guide
92/112
Run SmartPTT Dispatcher using the shortcut
on your desktop or from Start menu(SmartPTTSmartPTT Dispatcher).
7/29/2019 SmartPTT Deployment Guide
93/112
Enter database name, where alldispatcher data will be stored
7/29/2019 SmartPTT Deployment Guide
94/112
Click Create New Database
7/29/2019 SmartPTT Deployment Guide
95/112
Click OK
7/29/2019 SmartPTT Deployment Guide
96/112
Click Next
7/29/2019 SmartPTT Deployment Guide
97/112
Click Add to add Radioserver tothe list
7/29/2019 SmartPTT Deployment Guide
98/112
Enter Name (you can use anyalias) and Address : Port ofRadioserver. In our case we useRadioserverand
192.168.0.243:8888
192.168.0.243 is IP of thecomputer where Radioserver isinstalled and started
7/29/2019 SmartPTT Deployment Guide
99/112
Set Active to enable connectionto Radioserver
7/29/2019 SmartPTT Deployment Guide
100/112
Click OKto save Radioserverconfiguration
7/29/2019 SmartPTT Deployment Guide
101/112
Click Next
7/29/2019 SmartPTT Deployment Guide
102/112
Review Statuses settings andclick Next
7/29/2019 SmartPTT Deployment Guide
103/112
Review Event LogManagement settings and clickNext
7/29/2019 SmartPTT Deployment Guide
104/112
Review Call Window Settingsand click Next
7/29/2019 SmartPTT Deployment Guide
105/112
In Audio Input and Audio
Output set appropriate sounddevice, which are used bydispatcher
7/29/2019 SmartPTT Deployment Guide
106/112
Click Next
7/29/2019 SmartPTT Deployment Guide
107/112
Here you can change the folder,where all recorded calls will bestored
7/29/2019 SmartPTT Deployment Guide
108/112
Review other Audio RecordSettings and click Next
7/29/2019 SmartPTT Deployment Guide
109/112
Review GPS Settings and clickFinish
7/29/2019 SmartPTT Deployment Guide
110/112
Default Administrator passwordis empty. Click OKto proceed.
7/29/2019 SmartPTT Deployment Guide
111/112
If you have correctly configured
SmartPTT, after some radiosubscribers activity you will see logentries in dispatcher window
Also you should see your radioserver in Online section on leftpanel.
7/29/2019 SmartPTT Deployment Guide
112/112
Elcomplus LLC
Web: www.smartptt.com
E-mail: info@smartptt.com
634021, Russia, Tomsk
Frunze 130a
Tel./Fax: +7 (3822) 522-511
http://www.smartptt.com/mailto:info@smartptt.commailto:info@smartptt.comhttp://www.smartptt.com/
top related