Single Handle Kitchen Faucets - Delta Faucet · Single Handle Kitchen Faucets 46 SINGLE HANDLE KITCHEN 2010/2011 Delta Price Book • Effective November 1, 2010 Model Case Price Finish
Post on 14-Jan-2019
223 Views
Preview:
Transcript
Single Handle Kitchen Faucets
46
SING
LE H
ANDL
EKI
TCHE
N
2010/2011 Delta Price Book • Effective November 1, 2010
Model Case Price Finish Features
Please always order in full case. Extension kits available on page 72. = DIAMOND™ Seal Technologyl Items are priority, in-stock products as of the printing of this book and are subject to change without notice.
Sing
le H
andl
e
Cent
erse
t Ki
tche
n Fa
ucet
• Single lever handle• Standard spout swivels 170˚, no spray• 8" (203 mm) centres• 3-hole installation• 32" (812.8 mm) minimum supply lines below
deck included• Diamond™ valve• 2.2 gpm @ 60 psi, 8.3 L/min @ 414 kPa
l 136-DST 12 157.70 Chrome
NEW! Canadian Classic Kitchen Collection
Sing
le H
andl
e
Cent
erse
t Ki
tche
n Fa
ucet
• Single lever handle• Standard spout swivels 170˚ • Integral chrome spray mounted on
escutcheon• 8" (203 mm) centres• 3-hole installation• 32" (812.8 mm) minimum supply lines below
deck included• Diamond™ valve• 2.2 gpm @ 60 psi, 8.3 L/min @ 414 kPa
l 336-DST 12 198.35 ChromeNEW!
Sing
le H
andl
e
Cent
erse
t Ki
tche
n Fa
ucet
• Single lever handle• Standard spout swivels 170˚ • Chrome spray mounted on deck• 8" (203 mm) centres• 4-hole installation• 32" (812.8 mm) minimum supply lines below
deck included• Diamond™ valve• 2.2 gpm @ 60 psi, 8.3 L/min @ 414 kPa
l 436-DST 12 198.35 ChromeNEW!
Sing
le H
andl
e Ki
tche
n Fa
ucet
• 3-hole 8" (203.2mm) installation• Standard spout swivels 360° • 9 1/16" (230.18mm) long • 5 13/16" (147.63mm) from deck to aerator• Lever handle(s) • Hot/cold indicator(s) • 1/2" IPS connection • 1" (25.4mm) max. deck thickness • 6" (152.4mm) centers – order two RP238s• RP30393 adds 1" (25.4mm) to max.
deck thickness• 2.2 gpm @ 60 psi, 8.3 L/min @ 414 kPa
l 135 3 157.70 Chrome
Sing
le H
andl
e Ki
tche
n Fa
ucet
with
In
tegr
al S
pray
• 3-hole 8" (203.2mm) installation • Standard spout swivels 360° • 9 1/16" (230.18mm) long • 5 13/16" (147.63)mm from deck to aerator• Lever handle(s) • Hot/cold indicator(s) • 1/2" IPS connection • 1" (25.4mm) max. deck thickness • Matching finish spray • Spray mounts on right or left • RP30393 adds 1" (25.4mm) max.
to deck thickness• 2.2 gpm @ 60 psi, 8.3 L/min @ 414 kPa
l 335 3 198.35 Chrome
Canadian Classic Bath Collection
Model Case Price Finish Features
103
CANAD
IANCLASSIC BATH
www.deltafaucet.com • Customer Service 1-800-567-3300 • www.specselect.com
Please always order in full case. = DIAMOND™ Seal Technology
= WaterSense® Labeled Product - Flow Rate of 1.5 gpm (5.7 L/min) versus Industry Standard ASME.A112.18.1/CSA.B125.1 of 2.2 gpm (8.3 L/min).
l Items are priority, in-stock products as of the printing of this book and are subject to change without notice.
Sing
le H
andl
e
Cent
erse
t La
vato
ry F
auce
t
• Single lever handle• 4" (102 mm) centres• 3-hole installation• Less pop-up, with pop-up hole• Diamond™ valve• 32" (812.8 mm) minimum supply lines
below deck included• 1.5 gpm @ 60 psi, 5.7 L/min @ 414 kPa
l 536-DST 6 158.60 ChromeNEW!
Effective November 1, 2010 Pg. TP-7
TRACT-PACK
5"(127 mm)
2 3/8"(60 mm)
1 1/2"(38.1 mm)
5"(127 mm)
6 1/4"(158.8 mm)
1 13/16"(46.2 mm)
6 1/2"(165 mm)
4"(101.6 mm)
35 1/2"(895.4 mm)
37"(939.8 mm)
536
STANDARD SPECIFICATIONS(536 series only)• Single-handle lavatory faucets for exposed mounting on 2 and 3 hole sinks.• 4” (102 mm) centres.• 5" (127 mm) long spout.• DIAMOND™ valve• 32” (812.8 mm) minimum supply lines below deck included• Lever handle
THESE PRODUCTS MEET THE FOLLOWING STANDARDS AND SPECIFICATIONS:ANSI/ASME A112.18.1M-1996, CSA B125-93,IAPMO Listed, CSA Certified, ASTM F409 (for non-metallic drain)
535-STP Chrome Finish 117.15Single Lever Handle4” (102 mm) Centres, 3-Hole Installation, Less Pop-UpWith 14” (350 mm) SuppliesCase Quantity 12
535-WFTP With Fittings (1/2” [13 mm] IPS Adapters) 117.15
STANDARD SPECIFICATIONS(535 series only)• Single-handle lavatory faucets for exposed mounting on 2 and 3 hole sinks.• 4” (102 mm) centres.• Solid brass fabricated body.• 4.63” (118 mm) long spout.• Lever handle. Control mechanism shall be of the rotating stainless steel ball typewith replaceable non-metallic seats operating in stainless steel lined sockets
• Control handle will return to neutral position when valve is turned off.• Control mechanism is of the rotating ball type• STP supplied with 3/8” O.D. copper supply tubes.• Models with suffix “WF” supplied with 1/2” - 14 NPSM adapters.
THESE PRODUCTS MEET THE FOLLOWING STANDARDS AND SPECIFICATIONS:ANSI/ASME A112.18.1M-1996, CSA B125-93, IAPMO Listed, CSA Certified,ASTM F409 (for non-metallic drain)
4.63"(118 mm)
3.38"(86 mm)
2"(51 mm)
4.75"(121 mm)
6.5"(165 mm)
4"(100 mm)Centers
2"(51 mm)
14"(356 mm)
3/8"O.D.
CopperTubing
3.25"(83 mm)
6.5"(165 mm)
S
.5" - 14 NPSMSuffix WF Models Only535
®
®
®
Model Description List PriceSINGLE HANDLE LAVATORY MODELS
536-TP-DST Chrome Finish 117.15Single Lever Handle4" (102 mm) Centres, 3-Hole Installation, Less Pop-UpDIAMOND™ valve32” (812.8 mm) minimum supply lines below deck included
®
02_Delta_TractPack_Eng_FIN:2006 Tract-Pck_Eng 9/1/10 2:35 PM Page 7
Pg. TP-8 Customer Service: 1-800-567-3300 Effective November 1, 2010
TRAC
T-PA
CK
Model Description List PriceSINGLE HANDLE LAVATORY MODELS
580-TP Chrome Finish 154.05Single Lever Handle4" (102 mm) Centres, 3-Hole Installation, Less Pop-UpSolid Cast BrassCeramic Cartridge18" Braided Supplies
STANDARD SPECIFICATIONS(580 series only)• Single-handle lavatory faucets for exposed mounting on 2 and 3 hole sinks.• 4” (102 mm) centres.• Solid cast brass body.• 5.75" (146 mm) long spout.• Ceramic disc cartridge• 18" braided supply lines• Lever handle
THESE PRODUCTS MEET THE FOLLOWING STANDARDS ANDSPECIFICATIONS: ANSI/ASME A112.18.1M-1996, CSA B125-93, IAPMO Listed, CSA Certified, ASTM F409 (for non-metallic drain)
®
540-LPUTP-DST Chrome Finish 154.05Single Lever Handle4" (102 mm) Centres, 3-Hole Installation, Less Pop-UpDIAMOND™ valve32” (812.8 mm) minimum supply lines below deck included
®
®
STANDARD SPECIFICATIONS(537 and 540 series)• Single-handle lavatory faucets for exposed mounting on 2 and 3 hole sinks.• 4” (102 mm) centres.• 5" (127 mm) long spout.• DIAMOND™ valve.• 32” (812.8 mm) minimum supply lines below deck included.• Lever handle.
THESE PRODUCTS MEET THE FOLLOWING STANDARDS ANDSPECIFICATIONS: ANSI/ASME A112.18.1M-1996, CSA B125-93, IAPMO Listed, CSA Certified, ASTM F409 (for non-metallic drain)
®
580
5"(127 mm)
2 3/8"(60 mm)
1 1/2"(38.1 mm)
5"(127 mm)
6 1/4"(158.8 mm)
1 13/16"(46.2 mm)
6 1/2"(165 mm)
4"(101.6 mm)
35 1/2"(895.4 mm)
37"(939.8 mm)
537
4"(102 mm)Centers
6 5/8"(168 mm)
35"(889 mm)
2" (51 mm)Max. DeckThickness
7 3/4"(197 mm)
2 11/16"(68 mm)
2"(51 mm)
1 3/8"(35 mm)
36"(914 mm)
3 X 1 1/8"~1 1/2"(29~38 mm)
Hole Size
Min. 2 1/2" (64 mm)Clearance to Back Splash Recommended
540
537-TP-DST Chrome Finish 116.15Single Lever Handle4" (102 mm) Centres, 3-Hole Installation, Less Pop-UpDIAMOND™ valve, with plug and chain notch on escutcheon plate32” (812.8 mm) minimum supply lines below deck includedCase Quantity 12
® AVAILABLE SPRING 2010
02_Delta_TractPack_Eng_FIN:2006 Tract-Pck_Eng 8/25/10 5:52 PM Page 8
top related