Transcript
EUROPE, MIDDLE EAST & AFRICA www.pentairfoodservice.eu
SHURFLO®
FOODSERVICECATALOGUE
PENTAIR FOODSERVICE EMEAPAGE i www.pentairfoodservice.eu
DECADES OF FOODSERVICELEADERSHIP AND INNOVATION
PENTAIR FOODSERVICE EMEA PAGE iiwww.pentairfoodservice.eu
iii. Pentair Water Solutions. Overview
GAS PUMPS 1. Postmix Syrup and Beverage Pump 2. Postmix Syrup Pumps for use with Coca-Cola 3. PIP Gas Operated Pumps 3. Beer Ace II 4. Brix Proportioning Pump 5. Brix Proportioning Pump Replacement Components
ELECTRIC PUMPS6. Pumps for Wine, Beer and Water Applications
FITTINGS7. Gas / Air Fittings8. Liquid Fittings 9 Electric Pump Fittings
SYSTEM ACCESSORIES10. Automatic Sold Out Switches10. Water Pressure Regulators11. Reverse Flow Inhibitors11. Automatic Bag Selector Valves12. Vacuum Regulator12. 3 Way Sanitising Valve13. Mounting Boards and Clips14. Fob-Stop Self-Closing Valve
WATER BOOST15. Water Boost Pumps16. Water Boost Systems
SHURFLO®CONTENTS
PLEASE NOTEInformation shown in this catalogue is for guidance only anddoes not constitute a contractual offer. For applicationsrequiring critical data please contact customer services.
Not all products are available in all regions. Please check withyour local distributor for further details.
Illustrations and tabulated information shown in thispublication are for guidance only, and does not constitute acontractual offer. For applications requiring critical dataplease contact your local PENTAIR office.
Information is believed to be accurate at the time ofpublication. PENTAIR reserves the right to alter productspecifications without notice.
BEVERAGEBag-in-Box (BIB)
Pump REVERSE OSMOSISShurflo® 8075 Silver Series RO Booster
Pump
PROBLEM WATERMRS-600HE-II High Efficiency Reverse Osmosis System
ICED TEAClaris™ Ultra XXLFiltration Systems
BEVERAGEAir Vent
BEVERAGEAutomatic Selector
Valve
COMBINATIONHigh Flow CSR Triple-MC2
Filtration System
WATER TREATMENT SOLUTIONS EVERYWHERE YOU NEED THEM
WATER BOOSTShurflo® Medium
Boost System
SOFTENINGCES-2850E Single
Tank Softener
FOUNTAINColdrink® 2-MC2
Filtration System
BEVERAGEShurflo® Electric Delivery Pump
WAREWASHINGKleenware® HTS-11
Scale ControlSystem
DRINKING WATEROW4-Plus Cartridge/
QL3B HeadCOFFEEQL3-BH2
Filtration SystemBEVERAGE
Sold Out Switches
ESPRESSOConserv RO-75E High Efficiency
RO System
ICEInsurice® Twin PF-i20002
Filtration System
STEAMConserv® RO-75S
High Efficiency RO System
PENTAIR FOODSERVICE EMEAPAGE 1 www.pentairfoodservice.eu PENTAIR FOODSERVICE EMEA PAGE 2www.pentairfoodservice.eu
The SHURflo gas (CO2/air) driven diaphragm pump is designed for the dispensing
of BIB syrups, wines, teas and juices. It utilises a technically proven twin chamber,
positive displacement, straight through design to maximise performance by
minimising pressure drop. The pump features automatic demand and automatic
sold-out vacuum shut-off for ease of operation.
The SHURflo gas pump is approved for use by all the leading soft drink
manufacturers and is NSF and SK approved for water, beverages, (including
alcohol, and non-alcoholic beverages.)
Gas Operated PumpsFor Bag-in-Box (Vacuum) Systems
166-296-28 3/8” 1/4” 1/4” 1/4” barbed elbow barbed elbow barbed elbow barbed elbow plastic stainless steel nylon with plastic check valve
12
Model Liquid In Liquid Out Gas In Gas Out
Fittings supplied with pump Pumps only available in multiples of
Postmix Syrup and Beverage Pumps
NB All fittings dimensions refer to Internal Diameter (I/D) of the line.
166-296-29 Gas Pump – WITHOUT FITTINGS 12
Model Description
Service Pump (Coca-Cola)
NB All fittings dimensions refer to Internal Diameter (I/D) of the line.
Pumps only available in multiples of
PENTAIR FOODSERVICE EMEAPAGE 1 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 2
Gas Operated Pumps continuedFor Bag-in-Box (Vacuum) Systems
166-296-19 3/8” 3/8” 1/4” 1/4” barbed elbow barbed straight barbed elbow barbed elbow plastic plastic nylon with plastic check valve
12
166-296-20 3/8” 3/8” 1/4” Muffler barbed elbow barbed straight barbed elbow plastic plastic nylon with check valve
12
166-296-25 3/8” 1/4” 1/4” 1/4” barbed elbow barbed elbow barbed elbow barbed elbow plastic stainless steel nylon with plastic
check valve
12
166-296-30 3/8” 3/8” 1/4” 1/4” barbed elbow barbed elbow barbed elbow barbed elbow plastic stainless steel nylon with plastic
check valve
12
166-296-33 3/8” 1/4” 1/4” 1/4” barbed elbow barbed elbow barbed ‘T’ piece barbed elbow plastic stainless steel fitting plastic plastic
with check valve
12
166-296-41 3/8” 3/8” 3/8” Muffler barbed elbow John Guest John Guest (short) plastic Stem Fitting Stem Fitting
12
166-296-31 1/4” 1/4” 1/4” 1/4” barbed elbow barbed elbow barbed elbow barbed elbow stainless steel stainless steel nylon with plastic check valve
12
Model Liquid In Liquid Out Gas In Gas Out
Fittings supplied with pump Pumps only available in multiples of
Postmix Syrup Pumps for use with Coca-Cola products only
3/8 inch ID BiB tubing and red BiB connectors included. 94-376-63
Gas Pump Boards for Coca Cola
166-296-06 Coca Cola pump board 5+1
94-376-62 Gas Pump System with 2 pumps
94-376-63 Gas Pump System with 3 pumps
94-376-33 Gas Pump System with 3 pumps +1 ASV
94-376-24 Gas Pump System with 3 pumps +3 ASV
Reference Description
www.pentairfoodservice.eu
These pumps are designed for carbonated beer, and branded “Beer-Ace”. They
are also ideal for pressurised premix systems. They are used to drive product
from container to the dispense tap without increasing the top pressure above
the minimum to hold the CO2 in solution. Products then have a longer shelf
life with less fobbing when the container empties. PIP pumps are also
suitable for boosting mains water pressure on beverage dispense systems.
Positive Inlet Pressure (PIP)Gas Operated Pumps
166-257-10 1/2” 3/8” 3/8” 1/4” barbed elbow John Guest barbed straight barbed elbow plastic stem fitting plastic plastic
12
166-257-28 1/2” 3/8” 3/8” 1/4” barbed elbow John Guest barbed straight barbed elbow plastic stem fitting plastic plastic
12
166-257-32 3/8” 3/8” 5/16” 1/4” barbed elbow John Guest John Guest barbed elbow plastic stem fitting stem fitting plastic
12
166-257-39 3/8” 1/4” 1/4” 1/4” St. Steel St. Steel barbed elbow barbed elbow elbow with check valve elbow
12
166-257-41 3/8” 3/8” 1/4” 1/4” St. Steel St. Steel barbed elbow barbed elbow elbow with check valve elbow
12
166-257-42 3/8” 3/8” 1/4” 1/4” plastic barbed John Guest barbed elbow barbed elbow stem fitting with check valve elbow
12
166-257-43 None None 1/4” 1/4” barbed elbow barbed with check valve elbow
12
SUK -0126 3/8” 3/8” 1/4” 3/8” St. Steel St. Steel barbed elbow standard elbow barb with check valve muffler
12
Model Liquid In Liquid Out Gas In Gas Out
Fittings supplied with pump Pumps only available in multiples of
Beer-Ace II
NB All fittings dimensions refer to Internal Diameter (I/D) of the line.
PENTAIR FOODSERVICE EMEAPAGE 3 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 4
The Brix pump is a proportioning device which pumps two liquids (e.g. water and concentrate) in
an exact ratio. The particular ratio is determined by the pump design, and is thereby
maintained precisely, independent of system flow or pressure changes, with no
need to regularly re adjust brix at the dispensing valve. The Brix pump
operates on the incoming city mains water pressure, which then becomes
part of the finished drink, eliminating the need for CO2 or electric power.
The Brix pump is ideally suited to premium juice applications, and
incorporates a valve design suitable for use with syrups containing
“stringy” pulp.
Brix Proportioning Pumps
94-260-01 3:1 YES 3/8” barbed elbow plastic 8
94-260-03 4:1 YES 3/8” barbed elbow plastic 8
94-260-05 5:1 YES 3/8” barbed elbow plastic 8
94-263-06 6:1 YES 3/8” barbed elbow plastic 8
94-260-07 7.7:1 YES 3/8” barbed elbow plastic 8
94-260-12 9:1 YES 3/8” barbed elbow plastic 8
Model Ratio Auto shut-off Fittings
LEADTIME: 12 weeks for initial order
Pumps only available in multiples of
www.pentairfoodservice.eu
94-402-02 Valve kit A
94-433-01 5:1 Spares kit Refer to customer services for availability
94-433-00 6:1 Spares kit Refer to customer services for availability
Reference Description Drawing Reference
Brix Proportioning Pumps Replacement Components
Brix Pumps
LEADTIME: 12 weeks for initial order
PENTAIR FOODSERVICE EMEAPAGE 5 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 6
The 8000 Series are high pressure, low flow, low power draw pumps ideallysuited for beverage applications such as wine dispense, mains-fedcarbonated water dispensers, portable cart water delivery, batch transferof product etc. These pumps can be mounted in any position, are compactand available in a variety of configurations and voltages. 8000 series pumpsare also ideal for boosting water pressure.
Electric Beverage Pumps
8008-902-355 240 S NO 3.1 bar 3.4 bar/ 6.0 12 Beverage and Wine 45 psi 50 psi open flow
SUK- 0209 240 S YES 3.1 bar 3.4 bar/ 6.0 12 as above with timer 45 psi 50 psi open flow
8010-252-136 24 H NO NO 4.2 bar/ 5.3 6 Booster/water 60 psi open flow delivery
8090-902-248 240 TM NO NO 5.8 bar/ 4.0 12 85 psi
@ 5 bar/70 psi
8095-951-299 8095-951-269
240 TM NO YES @ No 2.1 66.8 bar/98 psi
@ 5.5 bar/80psi
No baseplate
SUK- 0167
8095-911-269
SF08-103 240 IP54 Rated
SUK-0172* † S YES NO 80 psi Variable 12 Variable speed pump
Model Voltage Fittings Timer Bypass Pressure Flow rates Pumps switch available only setting litres available in per min multiples of
Pumps for wine, beer and water applications
Double output speed controller for SUK-0172
AS 8095-951-269 WITH FITTED BASEPLATE
NOTE: ALL ELECTRIC PUMPS ARE SUPPLIED WITH BASEPLATE UNLESS OTHERWISE STATED. BASEPLATE SUPPLIED SEPARATELY; 84-001-04.*Variable Speed Electric beer/wine pump. †To be used only with 240V controller Ref SF08-103
(Carbonator) For size options please refer to customer services
For ordering information please refer to customer services
8090-902-278 240 TM NO YES @ 6.9 bar/ 2.5 6 100 psi
@ 6.5 bar/95 psi5.5 bar/80psi
www.pentairfoodservice.eu
Gas and liquid fittings are not interchangeable. All fittings are available as spares.*Please note this may affect the price of the pump. As an alternative you may decide to refer to the gas core pumps on page 1 and 2 and buy fittings separately.
Fittings for Gas Pumps166-XXX-XX
Gas/Air Fittings
Gas Pump Clips
1/4” for 1/4” I/D tubing
84-042-06 1/4” Barbed elbow plastic 50 84-033-13 1/4” Barbed elbow plastic with check valve 50 84-078-02 1/4” Barbed ‘T’ plastic with check valve 100
Reference Description Min order quantity
3/8” for 3/8” I/D tubing
84-042-14 3/8” Barbed straight plastic 50 84-042-28 3/8” John Guest stem plastic 50
Reference Description Min order quantity
Muffler Assembly for 3/8” I/D tubing
94-057-01 Muffler (to take John Guest fitting to allow gas vent lines to be used) 50
Reference Description Min order quantity
NB All fittings dimensions refer to Internal Diameter (I/D) of the line.
GAS FITTINGS
BARBED ELBOW JOHN GUEST STEM ADAPTOR BARBED ‘T’ BARBED STRAIGHT MUFFLER KIT
94-359-10 50 sets QD clips (1 small – 2 large) – Yellow
94-359-50 50 sets QD clips (1 small – 2 large) – Red
21-852-00 50 QD clips (large) – Black
Reference Description
LEADTIME: 12 weeks for initial order
PENTAIR FOODSERVICE EMEAPAGE 7 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 8
Gas and liquid fittings are not interchangeable. All fittings are available as spares.
*Please note this may affect the price of the pump. As an alternative you may decide to refer to the gas core pumps on page 1 and 2 and buy fittings separately.
Fittings for Gas Pumps 166-XXX-XX continued
Liquid Fittings
1/4” for 1/4” I/D tubing
84-044-01 1/4” Barbed elbow stainless steel 50
Reference Description Min order quantity
3/8” for 3/8” I/D tubing
84-042-01 3/8” Barbed elbow plastic 50 84-038-00 3/8” Barbed straight plastic 50 84-044-11 3/8” Barbed elbow stainless steel 50 84-044-12 3/8” Barbed straight stainless steel 50 84-038-03 3/8” John Guest stem plastic 50
Reference Description Min order quantity
1/2” for 1/2” I/D tubing
84-040-00 1/2” Barbed elbow plastic 50
Reference Description Min order quantity
NB All fittings dimensions refer to Internal Diameter (I/D) of the line.
GAS FITTINGS
PLASTIC BARBED ELBOW BARBED ELBOW BARBED STRAIGHT JOHN GUEST STEM ADAPTOR
www.pentairfoodservice.eu
S Type fittings are designed for push-in quick connection to the ports of SHURflo electric pumps.
Fittings for 8000 seriesElectric Pumps
S Type Shurfit fittings
TM TYPE Threaded (male) fittings
84-1194-00 3/8” StainlessSteel
Single
Barbed elbow Reference Size Material Packed as
EV312812 3/8” Nylon Single
Stem adaptor Reference Size Material Packed as
244-6118 3/8” Nylon Single
Barbed elbow Reference Size Material Packed as
H Type Hexnut fittings
244-3926 1/2” Nylon Single 244-3916 3/8” Nylon Single
Barbed elbow Reference Size Material Packed as
244-2926 1/2” Nylon Single
Barbed straight Reference Size Material Packed as
Internal threads on fittings are 12 NPT (F)
PENTAIR FOODSERVICE EMEAPAGE 9 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 10
All the following accessories are intended to allow fine tuning of your dispense systems and to ensure thequality products you have chosen give you the optimum performance. Please consult your SHURflo technical advisor should you require more information on their use.
The Automatic Electric Sold-Out Switch (SOS) senses the pressure drop caused by an empty Bag-In-Box and automatically shuts off the flow in the water lines to prevent the serving of unflavoured carbonated water. The SOS can only be used with electric solenoid operated dispensing valves. This feature is particularly useful for clear syrups where a “supply-out” condition cannot be visually detected. The SOS automatically resets itself with the installation of a new BIB.
System Accessories
Automatic Sold Out Switches
94-068-01 Sold out switch kit – NSF – complete with stainless steel 1/4” ‘T’ fitting Solenoid valves Single
94-068-31 Sold out switch kit – complete with 2 x stainless steel 1/4” straight fittings Solenoid valves Single
Reference Description Use with Packed as
The SHURflo Water Pressure Reducing Valve regulatescity/main water inlet pressure to a specified maximum level.
Water Pressure Regulators
183-150-SS 50 psi (3.5 bar) 3/8” barb Brix and gas pumps single
183-130-SS 30 psi (2.1 bar) 3/8” barb Electric and gas pumps single
183-165-SS 65 psi (4.5 bar) 3/8”ss barb Stainless Steel barbed endcaps Electric and gas pumps single
183-130-NF 30 psi (2.1 bar) Threaded connections single
183-150-NF 50 psi (3.5 bar) Threaded connections single
183-165-NF 65 psi (4.5 bar) Threaded connections single
Reference Description Use with Packed as
For integration into dispense systems and other OE
www.pentairfoodservice.eu
The RFI prevents backflow and is for Brix pumps serving premix taps.
It operates as a non-return valve.
System Accessories continued
Reverse Flow Inhibitors
84-010-00 RFI 3/8” (10mm) Barb inlet & outlet Brix pumps Single
Reference Description Use with Packed as
The Automatic Selector Valve (ASV) allows two or more Bag-in-Box containers to
be connected in parallel to a single pump. When vacuum build up indicates the on-
line box is empty, the ASV automatically switches over to the second box,
eliminating the need to change boxes during peak business periods. New boxes
can then be hooked up at a suitable time to ensure continuous supply. Further
benefits of the ASV are with clear syrups where it gives operators the opportunity
to keep a constant supply of syrup thereby avoiding dispensing a spoiled drink.
Automatic Bag Selector Valves
165-110 ASV 12” hg (41kPg) Brix and Electric pumps 30
94-350-03 ASV 18” hg (61kPg) (90º elbow liquid out) Gas pumps 30
94-350-08 ASV 18” hg (61kPg) Gas pumps 30
Reference Description Use with Packed as
LEADTIME: 12 weeks for initial order
PENTAIR FOODSERVICE EMEAPAGE 11 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 12
A Vacuum Regulator used on the product inlet side within 18” (0.5 metre) of
the Brix pump permits the pumping of product from remote storage locations
to the pump. Please consult your SHURflo technical advisor for specific
system recommendations.
System Accessories continued
Vacuum Regulator
94-054-00 Vacuum regulator with Brix pumps Single
Reference Description Use with Packed as
A 3 way valve is designed to facilitate in-place cleaning and sanitising. Proper
system maintenance is essential to assure peak performance of all dispensing
equipment, the 3-way valve can be installed so that dispense heads can be
flushed without the need to clean the complete system.
3 Way Sanitising Valve
94-056-00 3-way sanitising valve with Brix pump 3/8” barbed elbow fittings
3/8” barbed elbow fittings
& cleaningsystems Single
Reference Description Use with Packed as
www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEAPAGE 13 www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA PAGE 14www.pentairfoodservice.eu
The SHURflo Fob-Stop automatic self-closing valve fits onto the keg
connector to prevent gas and fob escaping from the container into the
line when the vessel is empty. The Fob-Stop is designed to avoid
wastage and save time by keeping the line full of product when the
keg or tank needs changing.
System Accessories continued
Fob-Stop Self-Closing Valves
94-211-22 Straight EMU – 1/2” (Universal seal) 10 per box 170 x 160 x 145 2.5 for beers, lagers, etc. 6 boxes per outer 320 x 345 x 220 15.5
94-211-21 Straight EMU – 5/8” (Universal seal) 10 per box 170 x 160 x 145 2.5 for beers, lagers, etc. 6 boxes per outer 320 x 345 x 220 15.5
Reference Description Packed as Size (mm) Pack wt (kg)
Fob-Stop for beer
PENTAIR FOODSERVICE EMEAPAGE 15 www.pentairfoodservice.eu
Model Number 166-257-41
Design: Two chamber double diaphragm.
Power Source: CO2 gas, Nitrogen or clean compressed air.
Materials of Polypropylene, Celcon,Construction: EPDM, Santoprene, Stainless
steel.
Body colour: Black.
Temperature Limits: 34 to 120 degrees F (1·1 to 49C)
Weight: 1lbs (0.5 kg).
Size: 7·3H x 5·9W x 3·8D.
Fittings available: Liquid Inlet 3/8” Stainless Steel Elbow
Liquid Outlet 3/8” Stainless Steel Elbow
Gas In 1/4” Plastic Elbowwith Check Valve
Gas Out 1/4” Plastic Straight.
Displacement: 101cc per cycle.
Maximum Operating Pressure: 85 psi (5·9 bar).
Minimum Operating Pressure: 20 psi (1·4 bar).
Inlet Pressure: Must be a minimum of 10 psi (0·7bar) lower than pump drivepressure.
Flow Rate: 11 litres per minute at open flow.
Warranty: 3 years.
Water Boost Pumps
Gas Replacement ElectricPumps
•24V Replacement Pump8025-998-338
•Mini Water Boost8095-903-249
•Midi Water Boost8095-942-349
•Maxi Water Boost8095-942-349
Pre 2013 models (230v)
PENTAIR FOODSERVICE EMEA PAGE 16www.pentairfoodservice.eu
Mini Water Boost System
Features• Water Boost pump which increases city water pressure and flow to the dispenser valve which helps
maintain brix.
• Accumulator holds 118ml litres of water under pressure. 177ml (6oz) total liquid capacity.
• The accumulator reduces pump cycling.
• Adjustable Pre-charge pressure.
804-042EU Electric 100-240V with EU plug 6.9 BAR (90 psi)
804-042GB Electric 100-240V with GB plug 6.9 BAR (90 psi)
Model Number Model Options Maximum Pump Pressure
The increase in popularity of non-carbonated drinks and the inconsistency of city water pressure and flowrequires the need for a water boost system to deliver quality drinks in many installations. The SHURflo MiniWater Boost System will support two standard flow valves or one fast flow valve.
SPECIFICATIONSPUMP SPECIFICATIONS
Motor Design (Model 8025-998-338) 100 – 240 VAC / 50–60 Hz to 24 VDC permanent magnet; thermally protected with a non-replaceable integral fuse
Duty Cycle Intermittent (max. run time 20 min. within one hour)
Turn-On/Off Pressure 70 PSI [4.8 bar, 480 kPa] / 90 PSI [6.2 bar, 620 kPa]
Recommended Maximum Inlet Pressure 30 psi [2 bar, 200 kPa]
Check Valve Internal (prevent reverse flow)
Temperature Limits 34º – 100ºF [1.1º – 37.8ºC]
Port / Fitting QD ports female / 3/8", or 1/2" barb fittings or 3/4" NPT fittingsTANK SPECIFICATIONS Mini 804-042
Total Volume (air/liquid) 21 oz [0.62 L]
Approximate Draw Down Volume* 8 oz (0.22 L)
Bladder Material Butyl
Housing Material Glass Filled Nylon
Temperature Limits 34º – 100º F [1.1º – 37.8º C]
Maximum Working Pressure 100 psi [6.9 bar, 689 kPa]
* Drawdown volume varies with tank pre-charge, pump operating pressure and city water pressure. Specifications reflect tests at 50 psi [3.4 bar, 340 kPa] pre-charge w/20 psi [1.3 bar, 130 kPa] city water pressure, 90 psi [6.2 bar, 620 kPa] pump pressure.
PENTAIR FOODSERVICE EMEAPAGE 17 www.pentairfoodservice.eu
Midi Water Boost System
The SHURflo Midi Water Boost System consists of a SHURflo 8000 Series electric pump coupled to a 7.5litre Accumulator and associated brass fittings.
The system is capable of serving two high flow soft drink valves simultaneously while providing enoughresidual capacity for other back-room appliances.
The SHURflo Water Boost System can be wall or shelf mounted and is plumbed inline before all appliances.
The pump increases city water pressure and flow to the accumulator. The accumulator holds 3.7 litres ofwater under pressure with a tank pre-charge of 2.75 bar. Total capacity of the tank, air and liquid is 7.5litres. The increase in popularity of non-carbonated drinks and the inconsistency of city water pressure andflow requires the need for a water boost system to deliver quality drinks in many installations.
Model number Description
804-034EU Electric 100-240V EU plug
804-034GB Electric 100-240V GB plug
Model number Description
LEADTIME: 12 weeks for initial order
SPECIFICATIONSPUMP SPECIFICATIONS
Motor Design (Model 8025-998-338) 100 – 240 VAC / 50–60 Hz to 24 VDC permanent magnet; thermally protected with a non-replaceable integral fuse
Duty Cycle Intermittent (max. run time 20 min. within one hour)
Turn-On/Off Pressure 70 PSI [4.8 bar, 480 kPa] / 90 PSI [6.2 bar, 620 kPa]
Recommended Maximum Inlet Pressure 30 psi [2 bar, 200 kPa]
Check Valve Internal (prevent reverse flow)
Temperature Limits 34º – 100ºF [1.1º – 37.8ºC]
Port / Fitting QD ports female / 3/8", or 1/2" barb fittings or 3/4" NPT fittingsTANK SPECIFICATIONS Medium 804-034
Total Volume (air/liquid) 2 gal [7.6 L]
Approximate Draw Down Volume* 0.75 gallons (2.8 L)
Bladder Material Chlorbutyl
Housing Material Stainless Steel
Temperature Limits 34º – 100º F [1.1º – 37.8º C]
Maximum Working Pressure 100 psi [6.9 bar, 689 kPa]
* Drawdown volume varies with tank pre-charge, pump operating pressure and city water pressure. Specifications reflect tests at 50 psi [3.4 bar, 340 kPa] pre-charge w/20 psi [1.3 bar, 130 kPa] city water pressure, 90 psi [6.2 bar, 620 kPa] pump pressure.
PENTAIR FOODSERVICE EMEA PAGE 18www.pentairfoodservice.eu
Maxi Water Boost System
Features• Electric Water Boost pump which increases city water pressure and flow to accumulator.
• Accumulator holds 4.7 litres of water under pressure. 18.9 litres total capacity air and liquid.
• The accumulator reduces pump cycling.
The increase in popularity of non-carbonated drinks and the inconsistency of city water pressureand flow requires the need for a water boost system to deliver quality drinks in many installations.
Model number Description
804-068EU 100-240V/95psi (1/2” fittings) EU plug
804-068GB 100-240V/95psi (1/2” fittings) GB plug
Model number Description
LEADTIME: 12 weeks for initial order
SPECIFICATIONSPUMP SPECIFICATIONS
Motor Design (Model 8025-998-338) 100 – 240 VAC / 50–60 Hz to 24 VDC permanent magnet; thermally protected with a non-replaceable integral fuse
Duty Cycle Intermittent (max. run time 20 min. within one hour)
Turn-On/Off Pressure 70 PSI [4.8 bar, 480 kPa] / 90 PSI [6.2 bar, 620 kPa]
Recommended Maximum Inlet Pressure 30 psi [2 bar, 200 kPa]
Check Valve Internal (prevent reverse flow)
Temperature Limits 34º – 100ºF [1.1º – 37.8ºC]
Port / Fitting QD ports female / 3/8", or 1/2" barb fittings or 3/4" NPT fittingsTANK SPECIFICATIONS Maxi 804-067 & 804-068
Total Volume (air/liquid) 6 gal [22.7 L]
Approximate Draw Down Volume* 3.1 gallons (11.7 L)
Bladder Material Chlorbutyl
Housing Material Stainless Steel
Temperature Limits 34º – 100º F [1.1º – 37.8º C]
Maximum Working Pressure 100 psi [6.9 bar, 689 kPa]
* Drawdown volume varies with tank pre-charge, pump operating pressure and city water pressure. Specifications reflect tests at 50 psi [3.4 bar, 340 kPa] pre-charge w/20 psi [1.3 bar, 130 kPa] city water pressure, 90 psi [6.2 bar, 620 kPa] pump pressure.
PENTAIR FOODSERVICE EMEAPAGE 19 www.pentairfoodservice.eu
NOTES
PENTAIR FOODSERVICE EMEA PAGE 20www.pentairfoodservice.eu
PENTAIR FOODSERVICE EMEA www.pentairfoodservice.eu
ISSUE: FEBRUARY 2018
Industriepark Wolfstee, Toekomstlaan 30, B-2200 Herentals, BelgiumTELEPHONE +32 142 83504 FAX +32 142 83505EMAIL sales@everpure-europe.com WEBSITE www.pentairfoodservice.eu
© 2004–2018 Pentair. All Right Reserved. DISCLAIMER: While every reasonable effort is made to ensure that the information provided in this bookletis accurate, PENTAIR, its employees and agents will not be held responsible for any damage to equipment,however arising, from the use of, or reliance upon this information.
top related