Shogun Studio Firmware Update Process · • Disconnect the power cable from the Shogun Studio. • • Connect the power cable to the Shogun Studio. • a few minutes for the Controller
Post on 02-Feb-2020
11 Views
Preview:
Transcript
Atomos Firmware Upgrade
How to update:• Download the latest version of AtomOS for Shogun Studio and the Controller Update from
atomos.com/support.
• Disconnect the power cable from the Shogun Studio.
•
• Connect the power cable to the Shogun Studio.
• a few minutes for the Controller
Update to complete. The unit will automatically start up once the update is complete.
• utton on display unit 1 and go
into About Shogun Studio and it will display the version number.
•
• Unzip ATOMSHS_X.X.zip and copy ATOMSHS.FW onto an SSD.
•
NOTE: Both units can be updated at once by copying ATOMSHS.FW onto two SDDs and
placing them into both caddies before powering up.
• AtomOS will begin updating.
• will still be on the SSD.
• Once AtomOS has been updated on unit 1, power down.
• Place the SSD into unit 2 and power up and AtomOS will install.
• Once the update is complete, go the Menu page on each unit, then About Shogun Studio. The
latest version will be displayed on both displays if installed correctly.
Shogun Studio Firmware Update Process
top related