S32G VEHICLE NETWORK PROCESSING GOLDBOX (S32G-VNP …
Post on 22-Jan-2022
5 Views
Preview:
Transcript
FACT SHEETS32G-VNP-GLDBOX
Supports Service-oriented Gateways, Vehicle Compute and Domain Control ApplicationsThe S32G-VNP-GLDBOX is a compact, highly optimized and integrated reference design featuring the S32G Vehicle Network Processor. With its high-performance computing capacity and rich input/output (I/O), the GoldBox can provide reference for a variety of typical automotive applications, such as service-oriented gateways, vehicle central compute, domain controllers, safety processors and black boxes. Carmakers, suppliers and software ecosystem partners can directly use the GoldBox to help accelerate development for shorter time-to-market.
TECHNICAL HIGHLIGHTS
• Ideal for development, evaluation and proof-of-concept demonstrations
• Rugged enclosure with integrated thermal management
• Hardware Security Engine (HSE), Ethernet Package Forwarding Engine (PFE) and Low Latency Communications Engine (LLCE)
• Multiple network interfaces with 18 CAN/CAN FD and 12 Ethernet ports
• M.2 slot support for SSD storage and AI/ML acceleration modules
• Power management IC strengthens functional safety design
S32G VEHICLE NETWORK PROCESSING GOLDBOX (S32G-VNP-GLDBOX)
www.nxp.com/GoldBox
NXP and the NXP logo are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm and Cortex are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere. The related technology may be protected by any or all of patents, copyrights, designs and trade secrets. All rights reserved. © 2021 NXP B.V.
Document Number: S32GVNPGLDBOXFS REV 1
FEATURES
• Hardware key features:
– 1 x NOR flash (64 MB)
– 1 x eMMC (32 GB), 1 x SD card slot
– 1 x LPDDR4 (4 GB)
– 6 x 100BASE-T1 Ethernet
– 5 x 1000BASE-T Ethernet
– 1 x 100BASE-TX Ethernet
– 18 x FlexCAN
– 5 x LINFlexD
– 1 x FlexRay
– 1 x USB 2.0
– 5 x ADC, 1 x DSPI, 1 x I2C
– 1 x PCIe X1
– 1 x M.2 M-key, 1 x M.2 E-key
• Supports functional safety features:
– ASIL D S32G274A vehicle network processor
– ASIL D VR5510 power management IC
– ASIL B SJA1110A Ethernet switch
– Fault management and reset logic circuits
ENABLEMENT TOOLS
• NXP S32 Design Studio, Yocto, EB tresos™
• Linux®, FreeRTOS™, Real-Time Drivers (RTDs)
• Compiler: Green Hills®, gcc
• Debugger: Lauterbach, S32G Debug Probe
SYSTEM BLOCK DIAGRAM
12V ExternalPower
5-ch. LINCON-J5
Automotive Ethernet Switch(SJA1110A)
S32G274ATri Arm® Cortex®-M7
Quad Cortex-A53
18-ch. CANCON-J6
1-ch. FlexRayCON-J6
TJA10241x
TJA10211x
TJA10811x
TJA11534x
TJA14636x
TJA10436x
TJA10432x
Power Jack
Boot ModeSelect
RCON
PCIe® X1Socket
M.2 M-KeySlot
M.2 E-KeySlot
6-ch.100BASE-T1
1-ch.Micro-AB
1-ch.RJ45
1-ch.RJ45
EthernetPHY 1x
EthernetPHY 1x
EthernetPHY 1x
EthernetPHY 1x
EthernetPHY 1x
USB 2.0Transceiver
1x
1-ch.RJ45
1-ch.RJ45
1-ch.RJ45
1-ch.RJ45
SD CardSlot
eMMC
QSPI Flash200 MHz
Aurora Trace
JTAGDebug
5-ch. ADCCON-J5
LPDDR43200 MT/s
RTC
PMIC VR5510
100BASE-TX x1
1000BASE-T 1000BASE-T 1000BASE-T 1000BASE-T 1000BASE-T
4-ch. LLCE_LIN 1-ch. LINFlexD 1-ch. LLCE_FlexRay 16-ch. LLCE_CAN 2-ch. Flex_CAN
PFE_MAC0 PFE_MAC1 PFE_MAC2 USB_OTGGMAC0
100BASE-T1x6
SYSTEM BLOCK DIAGRAM
Core 3 x Arm® Cortex®-M7 LS pairs and 4 x Cortex-A53 cores (opt. cluster LS)
Memory 8 MB system RAM, 32 KB standby RAM, DRAM I/F, QuadSPI I/F, eMMC/SDXC
Communications FlexCAN, LINflexD, FlexRay, DSPI, I2C, PCIe® 3.0, USB 2.0
Ethernet Networks
1-Gbit MAC, 1-Gbit/2.5-Gbit MAC (PFE_MAC0), 1-Gbit MAC (PFE_MAC2), 1-Gbit MAC (PFE_MAC1)
Security HSE, XRDC, eFuse, Lifecycle
Safety 2 x Safe DMA, FCCU and LBIST/MBIST
ADC/Timers 12-bit SAR ADC, System timer module, software watchdog timer, periodic interrupt timer, FlexTimer, real-time clock
S32G274A PROCESSOR SPECIFICATIONS
top related