Roof Hook SECTION: Tools and Equipment ISSUED: 02-2011REVISED: ##-####

Roof Hook

SECTION: Tools and EquipmentISSUED: 02-2011 REVISED: ##-####

Objectives

• To provide an understanding of the following– Specifications– Use– Maintenance– Safety

Specifications

• Steel tube construction

• 4 ft in length• 2 hooks at different

angles• Pry head on opposite

end

Use

• Breach walls and ceilings– Optimal for lath and

plaster

• Ventilation and forcible entry– Breaking windows

• Prying

Maintenance

• Check for burrs or other damage• Clean with mild soap and water• Remove rust with wire wheel or brush• Apply a thin coat of WD40 to any non painted

metal surfaces• May paint black to prevent rusting• Keep handle wrapped with black cloth tape

Safety

• Wear appropriate PPE– Minimum of helmet, gloves, and eye

protection

• Full turnouts and SCBA are required when utilizing tool in an IDLH atmosphere or when gaining entry into a possible IDLH atmosphere

• Check surroundings prior to using tool• Ensure the tool is the right tool for the job