Replacements, Quality adjustments and Sales Prices - …/media/Kontorer/12-Priser-og... · Replacements, Quality adjustments and Sales Prices Jörgen Dalén Oxana Tarassiouk. Background
Post on 02-Feb-2018
216 Views
Preview:
Transcript
Replacements, Quality
adjustments and Sales Prices
Jörgen Dalén
Oxana Tarassiouk
Background to paper
• First version was a report commissioned by
Statistics Sweden for proposing alternatives to its
currently most used quality adjustment (QA)
method: direct valuation by the price collectors.
• Report presented to CPI Board (Indexnämnden) of
Statistics Sweden in October 2012
• Slightly revised, tables updated, summarizing
section added for more general discussion
• This version to be presented at Ottawa Group
meeting in Copenhagen, May 1-3, 2013
Currently (2012) usedQA/replacement methods• Price collectors estimate the value of a quality
difference at replacements
• Used for most CPI goods (not services)
• Monthly chaining and re-sampling
• Used for computers and mobile phones
• Various explicit adjustments for cars (+ motor cyclesand boats)
• Option prices
• Judgemental adjustment by central
• Deletion of non-matching product offers for dailynecessities and alcohol
• Effectively using only product offers available from previous December
QA in the presence of sales prices• Immediately realised that QA problem in practice is
intertwined with the pattern of sales prices
• Analytical tool: Product offer life= the series of
prices for a certain product in a certain outlet
• Very often a product offer life ends with a
sales/reduced price after which a new product offer
comes in with a high price
• What is the right quality adjustment between a
product on a sales price and a new product offer?
Sales prices and price reductionsStylized example
Month 0 1 2 3 4 5 6
Price 195 195 195 99 99 225 225
• One could generalise this example to call it a regular
price-sales price-replacement (rsr) cycle.
• The reason that this pattern creates great problems for
price measurement is its asymmetrical nature.
• Price decreases typically occur within the life-time of
one product offer but the price increase occurs at the
replacement.
• Two examples – Table 2 and 3
Table 2: Example of price observations in one outlet 2010-2012, curtain (cloth)
Table 3: Example of price observations in one outlet 2010-2011, large TV
Raw price change=6990/17632=39.6 %
Implicit quality indexes
• APC = change in average prices
• API = Actual price index (CPI numbers)
• Shows the quality change that is implied by the methods and procedures used in the index
• IQI>100 means quality increase. Almost all IQI in Table 4>100
• Question: Is it reasonable to assume that quality has increased for all products?
• Back to Tables 2 and 3• Price collectors normally attribute part of price increase to
quality change
API
APCIQI =
IQI Table
Product group 2010,
actua
l
2010,
bridged
overlap
2011,
actual
2011,
bridged
overlap
2012,
actual
2012,
bridged
overlap
Furniture 100.5 100.9 100.9 103.3 100.8 102.4
Household textiles 104.5 115.5 103.7 122.0 101.0 120.9
Household appliances 101.0 108.3 105.8 106.5 103.2 105.4
Household equipment 103.9 110.8 103.9 109.9 100.1 98.0
Tools for home and
garden 104.5 107.8 104.4 103.5 101.6 102.4
Recreational goods102.2 112.7 100.9 108.5 103.8 109.1
Home electronics107.7 113.0 111.8 114.2 111.0 119.1
Large TVs 111.0 117.1 113.7 115.3 111.5 116.2
Digital cameras97.8 100.1 110.9 112.1 121.0 147.4
DVD players 107.2 114.8 106.6 113.1 111.3 117.2
Comments on IQI Table
• Almost all IQI>100 – implies quality improvement
(or underestimating bias …)
• Bridged overlap increases IQI, often by a lot.
• Since the price increase at replacement is
eliminated and replaced by averages of other
movements, often small,
Table 5 – product offer live spans
P r o d u c t M o n t h s P r o d u c t M o n t h s P r o d u c t M o n t h s
P l a t e 1 2 . 9 F l o w e r , p l a n t 1 5 .7 V i d e o c a m e r a 4 . 8
C o ff e e c u p 1 0 . 8 S k i e q u i p m e n t 3 . 8 A u d i o s y s t e m s
6 . 0
G l a s s 1 0 . 7 S p o r t e q u i p m e n t 7 . 5 H o m e c i n e m a s y s t e m
6 . 1
E a t i n g k n i f e 1 9 . 2 O u t d o o r
re c r e a t i o n
e q u i p m e n t
1 0 .4 C D r a d i o 6 . 0
S a u c e p a n 1 4 . 2 T o y 1 1 .6 M P 3 p l a y e r 6 . 8
K i t c h e n k n i f e 1 7 . 2 K i t c h e n t ab l e 1 5 .5 G a m e c o n s o l e 9 . 0
K i t c h e n s c a l e 1 4 . 4 U n u p h o l s t e re d
c h a i r
1 4 .4 D i g i t a l
c a m e r a
5 . 9
S a l a d b o w l 1 2 . 7 U p h o l s t e re d
c h a i r
1 4 .3 C o m p u t e r 3 . 5
B a b y c a r r i a g e 1 1 . 8 B e d 1 6 .9 M o b i l e p h o n e 5 . 6
B a b y c a r s e a t 1 7 . 2 C e i l i n g l a m p 1 4 .3 W a s h i n g
m a c h i n e
6 . 0
B a g , c a s e ,
p u rs e
6 . 6 A rm c h a i r 1 5 .5 D i s h w a s h e r 7 . 0
T o w e l 1 3 . 5 S o f a 1 3 .0 V a c u u m c l e a n e r
7 . 4
D u v e t c o v e r s e t
9 . 7 S h e l f , c ab i n e t 1 7 .0 R e f r i g e r a t o r 6 . 3
C u rt a i n (c l o t h )
1 0 . 0 C a r p e t 1 2 .8 M i c r o w a v e o v e n
8 . 9
Q u i l t 1 4 . 0 M a t t re s s 2 3 .2 C o f fe e m a k e r 9 . 6
C a r t y r e 1 5 . 3 M i rr o r 1 6 .9 W a t e r b o i l e r 9 . 0
C a r a c c e s s o r y 2 0 . 2 T V , s m a l l 4 . 3 W a t c h 1 9 .0
B i c y c l e 1 1 . 0 T V , l a r g e 4 . 3 J e w e l l e r y 2 0 .8
M u s i c a l
i n s t ru m e n t
1 1 . 6 D V D p l a y e r 5 . 2
Product offer lives
• Most POs live about a year in the CPI (Table 5)
• PO for home electronics live only 4-6 months
Table 6 (part)Group/ product group
(w = weight, n = total number of lives)
Rsr, pure price
decreasePure price increase Other patterns
%
Median
price
change per
month %
Median
price
change per
month %
Median
price
change per
month
Household equipment
Plate (w = 0.69, n = 346) 8.7, 22 0.92, 0.99 9.4 1.01 59.9 ≈ 1
Coffee cup (w = 0.74, n = 205) 13.6, 6.6 0.91, 0.98 8.7 1.01 71.2 ≈ 1
Glass (w = 0.67, n = 59) 7.1, 7.3 0.82, 0.97 29.2 1.01 56.3 ≈ 1
Eating knife (w = 0.34, n = 27) 4.2, 7.3 0.91, 0.99 23.5 1.01 64.9 ≈ 1
Saucepan (w = 1.06, n = 97) 7.1, 6.2 0.97, 0.99 17.0 1.00 69.7 ≈ 1
Kitchen knife (w = 1.06, n = 77) 7.4, 17 0.95, 0.99 18.0 1.01 57.6 ≈ 1
Kitchen scale (w = 1.06, n = 82) 0.4, 0.0 0.95, . 14.2 1.01 85.3 ≈ 1
Plastic food container (w = 1.06, n = 103) 1.2, 12.9 0.96, 1.00 26.5 1.01 59.4 ≈ 1
Salad bowl (w = 1.06, n = 78) 5.5, 0.0 0.94, . 38.7 1.01 55.7 ≈ 1
Other personal goods
Baby carriage (w = 0.31, n = 193) 15.9, 10.1 0.98, 0.99 38.8 1.00 35.2 ≈ 1
Baby car seat (w = 0.32, n = 94) 7.3, 5.5 0.97, 0.99 45.1 1.00 42.1 ≈ 1
Bag, case, purse (w = 1.92, n = 388) 12.3, 3.5 0.89, 0.97 20.9 1.01 63.2 ≈ 1
Household textiles
Towel (w = 0.41, n = 305) 18.3, 16.5 0.94, 0.99 22.9 1.01 42.2 ≈ 1
Duvet cover set (w = 1.15, n = 526) 26.2, 4.6 0.93, 0.96 9.4 1.02 59.8 ≈ 1
Curtain (cloth) (w = 2.89, n = 548) 20.6, 7.1 0.9, 0.98 20.5 1.01 51.8 ≈ 1
Quilt (w = 1.19, n = 171) 13.6, 4.2 0.98, 0.98 30.8 1.01 51.3 ≈ 1
Table 6
• Different types of product lives• Rsr = regular price-sales price-replacement• Pure price decrease (≈rsr)• Pure price increase• Others (one month, no price change ...)
• Most product offer lives involve no price change at all or very small ones. Price change essentially estimated from the first three types of lives and from the replacements between two lives.
• For high-tech products, the price decreases far outnumber the increases.
• For other products the patterns are more mixed and in most cases price increases are more numerous than decreases. • But price decreases tend to be larger than price increases
How to interpret results?
• Normal market assumptions:
• For traditional products no or small quality change on average
• Still IQI>100 in most cases
• For high-tech products there is real quality change• But how big and how rapid?
• Look at Tables 7 and 8 for actual results
• Rather extreme index movements
• Sweden extreme in Europe for home electronics
• Swedish krona stronger
• Cut-throat competion in Swedish market
• But could this explain everything??
Results from present methods
TV, large TV, smallComputers
DVD-player
Coicop 09.1
2010 53,1 55,3 64,0 72,8 70,8
2011 54,9 61,0 60,6 72,7 70,8
2012, July 62,1 66,4 68,0 72,9 73,8
2010-2012, July 18,1 22,4 26,4 38,6 37,0
• Extreme results for TVs!
Price collector valuation Mcr
International comparison from 2005)• Table 8: Sweden in extreme low end in a European
context
09.1.1 Equipment for the reception. recording and reproduction of sound and pictures
09.1 Audio-visual. photographic and information processing equipment
Country HICP (2005=100) CountryHICP (2005=100)
Sweden 27.6 Sweden 40.3
France 37.4 Estonia 44.0
Czech Republic 39.4 Ireland 45.5
Estonia 39.6 Spain 46.0
Belgium 43.7 Latvia 46.8
Latvia 41.8 Czech Republic 47.6
Slovakia 42.3 Switzerland 47.6
Conclusion
• Risk for downward CPI bias apparent
• New methodology needed!
• Two main methods proposed:
• Direct price comparison (no quality adjustment) for
most products
• Monthly chaining and replacement for high-tech
products
(4) … elementary expenditure categories (weights) …consist of explicitly stated
consumption segments distinguishable by consumption purpose. …. Consumption
segments are relatively stable over time although the product-offers comprising a
consumption segment will change as markets evolve.
(5) The notion of consumption segments by purpose is therefore central to sampling and to
the meaning of quality change and quality adjustment. …
(6) The range of product-offers will change over time as products are modified or replaced
by retailers and manufacturers. The HICP requires the representation of all currently
available product-offers within the consumption segments by purpose selected in the
reference period in order to measure their impact on inflation. This applies particularly to
new models or varieties of previously existing products.
From EU Commission Regulation (EC) No 1334/2007
• So the idea is that a replacement PO has to represent the
reference period PO.
New methodology proposals: Direct price comparison
• Product specifications fixed in base period for a year or more.• Principle of base period representativity can be read from
EU regulations
• Replacements are essentially equivalent (sufficiently similar) for direct price comparisons to be used.
• As a second replacement criterion the replacement should be well sold.
• If no essentially equivalent product offer is available the product offer is deleted and price change computed over the remaining product offers.
• In case a supported QA method is available for a certain product the criterion essentially equivalent is changed to comparable under the QA method.
More on direct comparisons
• Applied to most products
• It should be noted that today the interviewers assign a quality difference of zero to 57 % of all replacements
• The interviewer could thus be instructed to choose a replacement where she would feel comfortable to assign a quality difference of zero.
• Sales prices in the base period still a problem. Need to be same share of sales prices in December t-1 and t
• One possibility: Start price measurement in October but prices in CPI only from December
New methodology proposals: MCR method
• Now used for computers and mobile phones
• Other home electronics products are similar:
• Length of product lives
• Share of price decreasing cycles
• Expected rapid technological and quality change
• Method proposed for all “machine-type” products in
home electronics
New mcr method
• Move to a more rigorous mcr methodology
• Monthly chaíning
• Genuine re-sampling every month
• Ascertain that a price represents a “normal” sales
quantity
• Central staff needs to be involved in price
collection
• Limit price collection to Stockholm + websites at
least for a transitional period?
MCR procedures, more detail
• Product offers are selected in the base period on the basis of being among the n most sold in the outlet according to a wide product specification. Most sold should ideally relate to a full month and not a much shorter period and to the price as recorded by the interviewer.
• They are kept in the index as long as they are well sold. This fact has to be established each month. A proxy for well sold may be that it is displayed as a volume product.
• In each month new product offers are included regardless of whether the old ones have terminated. They are included on the basis of being among the n most sold. The sample size in each outlet will vary over months but should on average be n.
• The index is computed through monthly links (m-1 to m) including only identical product offers, no “essentially equivalent” ones.
Note on scanner data
• We need to study to which extent there are rsr
cycles in scanner data!
• If rsr cycles are frequent then a methodology
based on matching EAN codes could fail seriously
and create underestimating biases.
• Instead replacement methods need to be forced on
scanner data when ean codes are discontinued.
Summary of proposals for Sweden
• No more quality adjustment by price collectors• Large systematic bias risks in current procedures, • The method amounts to unsupported adjustments which is a C-method (not allowed)
in EU parlance• Many products are of a high-tech nature which the price collectors lack competence in
valuing and they also feel uneasy about this task
• Central explicit QA maintained but is not expected to play major role
• Two standard methods proposed• Direct price comparisons for traditional products with normal life spans of about a year• Mcr-method for high-tech products with short life span in the market.
• Details have to be deleoped futher and be tested in praktice, partly during the courseof work
• The cost of the new procedures are expected to be lower allowing for a high ambition in the detailed execution of the new methods.
• In practice Statistics Sweden is now taking cautious steps in the direction proposedin the paper.
Reserve slides
• To be shown only if needed
Products in scope for studyCategory Weight, ‰
All Int.judg.
High-tech products 22.7 10.4
Recreational goods 22.2 11
Other personal goods 6.4 4.2
Household equipment 7.7 3.7
Restaurants 51.3 24.8
Furniture 22.3 22.3
Household textiles 5.6 4.5
Household goods 7.7 7.7
Recreational and cultural
services
1.6 0
Tools and garden equipment 4.0 4.0
Media for music, photo and
film
3.8 3.8
Lodging 5.2 5.2
Personal hygiene 18.1 3.1
Optics 3.6 3.6
Representativity and comparability• Basic goal conflict for CPI replacements
• Representativity - sample of products and outlets should reflect the universe.
• Comparability – replace between identical or equivalent product offers.
• Reference period representativity• can be read from EU Regulation, • is inherent in Laspyeres logic (fixed basket representing
the reference period)• So representativity relates to product offers in the
reference period.
• Criteria for replacements in order of priority:• Replacements shall be equivalent or comparable.• Replacements shall be the most sold among equivalent
or comparable product offers.• Deletion (like for food) if no comparable replacement
Evaluating QA methods• Intuitive ideas among price statisticians
• Overlap paradigm: Price differences reveal consumer valuations so not a quality difference
• Pitfall: Assumes market equilibrium. Short-lived clearance sales violate this.
• Quality improvement for tech products –replacements often have higher quality
• Price reductions can reflect relative quality decline
• Still short-lived clearance sales should not influence the index
• Traditional products tend to have smaller changes so QA should not reduce price change on average
• Changes may occur but clear evidence needed for accepting average quality change
Explicit quality adjustments
• Hedonic methods considered best by many• Resource-demanding• Requires a strictly limited scope within which hedonic model applies• Re-estimation needed frequently due to market changes
• Option prices• Information needed from previous period• Only known to work for cars and transport equipment
• Other supported adjustments• Examples fuel cost for cars • Not frequently available
• Unsupported adjustments• Judgemental without “objective” model in support
• Unsupported adjustments• Advised against by CENEX• Interviewer adjustments example• Also central judgemental adjustments would be unsupported
top related