RENTAL CATALOGUE - Rentals | Lifting, Rigging & Hoisting ... · PADEYE TESTER 23 SEAFLEX TESTING EQUIPMENT 24 SEAFLEX LIFTING EQUIPMENT 25 TEST WEIGHTS 26 ... We stock high quality
Post on 25-Apr-2018
224 Views
Preview:
Transcript
RENTALCATALOGUE
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU MELBOURNE | SYDNEY | BRISBANE | PERTH
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU2
CONTENTS
CATEGORY PAGE
COMPANY PROFILE 3
FREQUENTLY ASKED QUESTIONS 4
SPREADER BEAMS 5
WORK BOXES & RESCUE CAGES 7
LIFTING CLUTCHES 8
SHACKLES 9
CHAINS SETS & SLINGS 10
SNATCH BLOCKS 12
SWIVELS, MASTER LINKS & TRIANGLES 13
POWERED CHAIN HOISTS 14
CHAIN BLOCKS & HOISTS 16
BEAM TROLLEYS & CLAMPS 17
WINCHES 18
JACKING SYSTEMS 19
LOAD ROLLERS, SKATES & TOE JACKS 20
LOAD CELL SYSTEMS 21
PADEYE TESTER 23
SEAFLEX TESTING EQUIPMENT 24
SEAFLEX LIFTING EQUIPMENT 25
TEST WEIGHTS 26
DISCLAIMER & COPYRIGHT
Rigging Rentals makes every effort to maintain the accuracy and quality of the information provided in this catalogue. However, Rigging Rentals cannot guarantee and assumes no legal liability or responsibility for the accuracy or completeness of the information provided. The information contained in this catalogue is for general guidance only. You should neither act, nor refrain from action, on the basis of any such information. You should take appropriate professional advice on your particular circumstances because the application of our equipment may vary depending on particular circumstances. The copyright of all content on this catalogue is owned by Rigging Rentals and/or the various manufacturers of our equipment. No part of the Rigging Rentals’ website, catalogues and brochure may be changed, reproduced, stored in or transmitted on any website or medium without the prior written permission of Rigging Rentals.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU3
COMPANY PROFILE
SPECIALIST HIRERS LIFTING & RIGGING EQUIPMENT
EQUIPMENT BRANDS
R
MEMBERSHIPS & ACCREDITATIONS
The Global Lifting Group. The Group was established to enhance local and international capabilities and now has representation throughout Australia and internationally in Papua New Guinea and Indonesia.
LEEA is a global trade association for the lifting equipment industry, established in 1944 and incorporated in 2000 as a not for profit company owned and controlled by its members.
The Crane Industry Council of Australia (CICA) is the national peak body for the crane industry. CICA was formed in 1980 with the objective of providing one voice on matters of mutual concern to the Australian crane industry.
Rigging Rentals are an Australian owned and operated company specialising in lifting and rigging equipment hire to customers in the construction, shipping, defence, utilities, oil and gas, mining and manufacturing industries.
We stock high quality lifting and rigging gear from industry leading brands, all of which is fully maintained to original manufacturer standards. Our gear is also inspected and cleaned prior to delivery so it’s ready for your immediate use.
Rigging Rentals have branches located across Australia including Melbourne, Sydney, Perth and Brisbane. We also have strong relationships with transport providers we can deliver equipment to almost any location throughout Australia.
So when it comes to hiring gear for your next job, there’s only one choice – Rigging Rentals.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU4
FREQUENTLY ASKED QUESTIONS
How long will it take for my hire equipment to arrive?
Depending on your delivery location and equipment availability will be delivered next day (or in some cases same day). Contact your branch on 1300 744 736 for more information.
How is the equipment maintained and tested?
All hire equipment is maintained to Australian Standards and manufacturer’s recommendations.
What payment options do you have available?
Payment can be made by credit card (most major cards) and via purchase order. To discuss alternate payment methods please contact your branch on 1300 744 736.
What should I do if my equipment is damaged or malfunctions during use?
Please discontinue use immediately and contact your branch so we can arrange a suitable replacement and repair the damaged equipment.
PLEASE NOTE: Do not attempt to repair the equipment under any circumstances. In many cases, equipment may still be under warranty and any authorised repairs may void the warranty.
What freight providers do we use?
For most equipment we can provide standard road freight to all major cities and regional centres using our approved list of logistic providers. You may also nominate your preferred freight carrier.
Does my equipment come with certificate of test?
Yes, when required all lifting equipment is supplied with certificate of inspection or test.
Do load cells come with calibration certificates?
Yes, all load cells are issued with a valid NATA calibration certificate.
Q: Q:
Q:
Q:
Q:
Q:
Q:
WHY RENT?
FAQ’S
Is your money tied up in depreciating equipment?
Renting can be a great alternative to purchasing, reducing project costs and freeing up capital to grow your business.
• No upfront costs – pay only for the time you need the equipment.
• Reduced storage requirements - no need to warehouse the equipment, simply return it when your project is complete.
• Decrease maintenance costs: we take care of servicing,
inspection and certification of your equipment.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU5
CAPACITY SPANTARE
WEIGHTLOWER
LUG SUIT:TOP
LUG SUIT: CENTRE
LUG SUIT:
1.5t 3 m 25 kg 1.5t 1.5t N/A
6t 3 m 50 kg 4.t 4.7t N/A
6t 5 m 105 kg 4.7t 4.7t N/A
10t 3 m 100 kg 8.5t 6.5t 3.2t
10t 6 m 160 kg 8.5t 6.5t 3.2t
10t 4 m 150 kg 17t 12t 4.7t
20t 6 m 215 kg 17t 12t 4.75t
20t 4 m 200 kg 25t 17t 4.7t
30t 6 m 260 kg 25t 17t 4.75t
30t 4 m 260 kg 35t 25t 6.5t
50t 6 m 605 kg 55t 55t 6.5t
80t 6 m 605 kg 55t 55t 6.5t
SPREADER BEAMS
SPREADER BEAM TELESCOPIC
SPREADER BEAM MODULAR
We offer an extensive range of spreader beam solutions for hire, including telescopic spreaders, spreader end caps and modular spreaders. They are suitable for a range of applications, in particular large construction projects. All spreader beams are maintained to manufacturer standards and supplied with NATA test certificates on request.
CAPACITY SPAN TARE WEIGHTTOP
LUG SUIT:LOWER
LUG SUIT:
8t 2.5 m 50 kg 6.5t 4.7t
17t 4 m 125 kg 12t 8.5t
34t 6 m 291 kg 8.5t 6.5t
43t 8 m 468 kg 25t 25t
60t 8 m 941 kg 35t 35t
85t 12 m 1,220 kg 55t 55t
110t 12 m 1,895 kg 85t 55t
130t 16 m 2,915 kg 85t 85t
145t 20 m 3,900 kg 85t 85t
300t 26 m 6,600 kg 200t 150t
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU6
SPREADER BEAMS
SPREADER BEAM END CAPS
CAPACITY PIPE REQUIREDTARE
WEIGHTTOP
LUG SUIT:LOWER
LUG SUIT:
5.6t 80NB SHED 40 ERW - 3.25t 3.25t
16.4t 168.3 x6.4 Grade 350 50 kg 9.5t 9.5t
25t 273.1x6.4 Grade 350 65 kg 17t 13t
50t 273.1x6.35 Grade 350 110 kg 35t 35t
80t 323.9x9.53 Grade 350 175 kg 55t 55t
145t 355.6x9.53 Grade 350 210 kg 85t 85t
250t 457x12.7 Grade 350 575 kg 150t 150t
400t 508x12.7 Grade 350 800 kg 250t 250t
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU7
WORK BOXES & RESCUE CAGES
ONE PERSONWORK BOX WITH ROOF
We provide a range of Work Boxes and Rescue Cages for hire, including fully enclosed and open top models suitable for work in confined spaces with narrow entries or difficult to reach work areas. All boxes and cages are supplied with a suitable chain sling assembly and test certificates.
One person work box with roof600mm x 600mm x 2250mmWLL 125kg Tare 125kg
Two person crane work box1200mm x 750mm x 1155mmWLL 250kg Tare 250kg
TWO PERSONWORK BOX
THREE PERSONWORK BOX
THREE PERSON RESCUE WORK BOX
Three person crane work box1200mm x 1200mm x 1155mmWLL 350kg Tare 350kg
Rescue/three person work box2450mm x 1250mm x 1155mmGate opening 1030mmWLL 500kg Tare 375kg
TWO PERSON FORKLIFT WORK BOX
Two person forklift work box1200mm x 1200mm x 2250mmWLL 250kg Tare 250kg
Two person crane work box with roof1200mm x 750mm x 2300mmWLL 250kg Tare 300kg
TWO PERSONWORK BOX WITH ROOF
THREE PERSONWORK BOX WITH ROOF
Three person crane work box with roof1200mm x 1200mm x 1155mmWLL 250kg Tare 390kg
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU8
LIFTING CLUTCHES
CONCRETE LIFTING CLUTCHES
WLL WEIGHT D E F H M L
1.3t 1kg 70.5mm 45mm 73mm 157mm 11.5mm 181mm
2.5t 2kg 85mm 57mm 88mm 190mm 16mm 220mm
5.0t 3kg 88mm 69mm 110mm 223mm 22mm 271mm
10.0t 10kg 116mm 83mm 161mm 336mm 30mm 386mm
20.0t 21kg 133mm 107mm 182mm 437mm 42mm 497mm
32.0t 46kg 182mm 163mm 273mm 570mm 52mm 760mm
Rigging Rentals provide concrete lifting clutches for hire, which are designed for lifting pre-cast concrete product such as construction panels, pipes and columns. We hold multiple units in each size, so have the ability to supply several units of the same capacity for applications such as bridge beam installation.
EDGE LIFTING CLUTCHES
We provide Ancon and Reid edge lifting clutches for hire for the the lifting of pre cast panels. All clutches are supplied with test certificates. The clutches are available in 4.8, 7 and 10 tonne capacities.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU9
SAFETY PIN BOW SHACKLES
SHACKLES
SLING SAVER SHACKLES
WLL WEIGHT D B L W P R
6.5t 1.77kg 22mm 58mm 83mm 36mm 25mm 52mm
12.0t 4.91kg 32mm 83mm 115mm 51mm 35mm 72mm
17.0t 8.19kg 38mm 99mm 146mm 60mm 42mm 88mm
25.0t 14.22kg 45mm 126mm 178mm 74mm 50mm 103mm
35.0t 19.85kg 50mm 138mm 197mm 83mm 57mm 111mm
42.5t 28.33kg 57mm 160mm 222mm 95mm 65mm 130mm
55.0t 39.59kg 65mm 180mm 260mm 105mm 70mm 145mm
85.0t 62.00kg 75mm 190mm 329mm 127mm 83mm 162mm
120.0t 110.0kg 95mm 238mm 400mm 147mm 95mm 208mm
150.0t 160kg 105mm 275mm 410mm 169mm 108mm 238mm
200.0t 235kg 120mm 290mm 513mm 179mm 130mm 279mm
WLL WEIGHT D B L W P R
40.0t 21kg 97mm 140mm 199mm 84mm 51mm 109mm
55.0t 30kg 100mm 160mm 240mm 90mm 57mm 115mm
150t 160kg 170mm 250mm 390mm 140mm 95mm 185mm
200t 205kg 205mm 276mm 480mm 150mm 105mm 199mm
250t 320kg 240mm 300mm 542mm 170mm 120mm 240mm
Rigging Rentals provide a range of high quality alloy shackles for hire, ranging in capacity from 4.75 tonne through to 250 tonnes. All alloy shackles are full tested and maintained to manufacturer standards.
We provide a range of high capacity sling saver shackles for rental. The shackles are designed with a non-slip surface that eliminates bunching and reduces the tendency of the sling to slide. All shackles are full tested and maintained to manufacturer standards.
D
R
P
LB
W
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU10
CHAIN SETS & SLINGS
CHAIN SETS
ROUND & FLAT WEBBING SLINGS
WLL LENGTHS (METRES)
10t 2.0 - 4.0 6.0 8.0 10.0 -
20t - - 4.0 6.0 8.0 10.0 -
40t 1.8 2.5 - - 8.0 10.0 -
50t - 2.5 4.0 6.0 8.0 10.0 12.0
80t - 2.5 - 6.0 - 10.0 -
120t - 2.5 4.0 6.0 8.0 10.0 12.0
200t - - - - 8.0 10.0 -
Rigging Rentals hold chain sets in single and two leg sets across our branch network in all sizes from 10mm to 32mm, contact your closest branch for stock and availability. We can cater for one off hire of a single set through to the fit out of multiple dry hired cranes for long term projects.
We have a wide selection of synthetic round slings with some high capacity units for heavy lifts,Rigging Rentals can supply round slings from 10 to 200 tonne.
We also have a range of flat webbing slings suited for lifting boats, fibreglass pools and other lifts that where chains or round slings are suitable, we have sets of 10t equalizing triangles with two 5t x 200mm wide 8.0m flat webbing slings fitted with quality Yoke sling connectors, these are perfect for swimming pool lifts.
Chain Size
Straight Sling
Adjust.Sling
Reeved Sling
Straight Sling Reeved Sling Basket Sling Reeved Sling
mm 60° 90° 120° 60° 90° 120° 60° 90° 120°
6.0 1.1 1.1 0.8 1.9 1.6 1.1 1.5 1.2 0.8 1.5 1.2 0.8 1.7
7.0 1.5 1.5 1.1 2.6 2.8 1.5 2.0 1.6 1.1 2.0 1.6 1.1 2.3
8.0 2.0 2.0 1.5 3.5 2.8 2.0 2.6 2.1 1.5 2.6 2.1 1.5 3.0
10.0 3.2 3.2 2.4 5.5 4.5 3.2 4.1 3.4 2.4 4.1 3.4 2.4 4.8
13.0 5.3 5.3 4.0 9.2 7.5 5.3 6.9 5.6 4.0 6.9 5.6 4.0 8.0
16.0 8.0 8.0 6.0 13.8 11.3 8.0 10.4 8.5 6.0 10.4 8.5 6.0 12.0
20.0 12.5 12.5 9.4 21.6 17.6 12.5 16.3 13.3 9.4 16.3 13.3 9.4 18.8
22.0 15.0 15.0 11.3 26.0 21.2 15.0 19.5 15.9 11.3 19.5 15.9 11.3 22.5
26.0 21.2 21.2 15.9 36.7 29.9 21.2 27.6 22.5 15.9 27.6 22.5 15.9 31.8
32.0 31.5 31.5 23.6 54.5 44.4 31.5 41.0 33.4 23.6 41.0 33.4 23.6 47.3
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU11
WIRE ROPE SLINGS
CHAIN SETS & SLINGS
WIDTH MAX WLL LENGTH FITTINGS SUPPLIED
16mm 3.1t 20.0m thimble eyes
18mm 4.0t 4.0m thimble eyes
18mm 4.0t 6.0m thimble eyes & captured swivel
20mm 4.9t 8.0m thimble eyes
22mm 5.9t 6.0m thimble eyes & captured swivel
22mm 5.9t 10.0m thimble eyes
26mm 5.9t 8.0m thimble eyes
28mm 10.5t 8.0m thimble eyes
30mm 12.1t 3.0m thimble eyes
36mm 15.8t 8.0m thimble eyes
52mm 35.4t 6.0m soft eyes
52mm 35.4t 12.0m soft eyes
64mm 67.1t 10.0m soft eyes
76mm 80.1t 12.0m soft eyes
83mm 85t 13.7m soft eyes
Single leg wire slings with hard eyes to suit all of our snatch blocks typically in 6.0m, 8.0m & 12.0m lengths in the 16mm to 36mm range. Our range of wire slings for snatch blocks extends through to 52mm, 64mm & 76mm in 13.2m lengths with soft eyes.
ENDLESS GROMMET SLINGS
WIDTH MAX WLL LENGTH
76mm 120t 8.0m
We supply endless grommet slings for rental, which are commonly used as a choker hitch. For different sizes please contact your local branch.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU12
SNATCH BLOCKS
SNATCH BLOCKS
WLL SHEAVE WIRE SIZE A B C TARE
8t 203mm 16-18mm 530 210 93 16kg
13.5t 305mm 20-22mm 884 310 133 65kg
15t 300mm 24-26mm 890 310 135 65kg
20t 350mm 24-28mm 930 360 135 90kg
22t 355mm 26-30mm 960 365 140 90kg
30t 510mm 32-38mm 1100 510 200 210kg
50t 600mm 44-52mm 1585 630 210 400kg
85t 770mm 56-64mm 1912 790 310 640kg
150t 910mm 58-64mm 2120 930 240 2100kg
We provide a range of snatch blocks (pulley blocks, sheave blocks) for hire which are suitable for construction and maintenance applications. Ranging in capacity from 2 tonne through to 50 tonnes, they are also available in various top fittings including swivel shackles, swivel oval eye and swivel oval hooks. All snatch blocks are fully tested and maintained to manufacturer standards.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU13
SWIVELS, MASTERLINKS & TRIANGLES
LIFTING SWIVEL
MASTERLINKS
EQUALISING TRIANGLE
A B C D E F G
DIMENSIONS (mm) 700 220 102 74 190 100 200
WLL A B C
21.6t 39mm 300mm 150mm
50.0t 60mm 410mm 220mm
180.0t 100mm 600mm 380mm
250.0t 115mm 600mm 400mm
WLL TOP SHACKLE
LOWER SHACKLE
CENTRES WEIGHT
10t 12t 6.5t 300mm 15kg
30t 35t 17t 600mm 60kg
85t 85t 55t 500mm 130kg
110t 120t 85t 600mm 190kg
Rigging Rentals hold a limited range of large masterlinks, these are suited for use on rams horn hooks and with our 250 tonne load cell shackles.
Rigging Rentals offer 56.6 tonne swivels suitable for used on high capacity lifts. The swivels are suited for use on ramshorn hooks and with 250 tonne load cell shackles.
When using multiple sling legs this device provides a means of equalizing forces within the legs. Connection is made via standard Grade “S” bow shackle and can be used with chain, wire rope or synthetic slings. Ideal in compensating for differences in load lift points and sling lengths.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU14
POWERED CHAIN HOISTS
AIR HOISTS
WLL MAKE LIFT CONTROLS MINIMUM AIR REQUIREMENTS
CLOSED HEADROOM
.5t Endo 3m Cord 60psi/60cfm 450mm
.5t Endo 10m Cord 60psi/60cfm 450mm
.5t Toku 20m Pendant 85psi/60cfm 450mm
1t JDN 10m Cord 85psi/60cfm 450mm
1t JDN 20m Cord 85psi/60cfm 450mm
1t JDN 30m Cord 85psi/60cfm 450mm
1t JDN 30m Pendant 85psi/60cfm 450mm
2t JDN 10m Cord 85psi/60cfm 498mm
2t JDN 20m Cord 85psi/60cfm 498mm
3t Endo 6m Pendant 85psi/60cfm 582mm
3t Endo 12m Pendant 85psi/60cfm 582mm
3t JDN 15m Cord 85psi/195cfm 593mm
3t JDN 32m Cord 85psi/195cfm 593mm
3t JDN 50m Cord 85psi/195cfm 593mm
6t JDN 6m Cord 85psi/195cfm 593mm
6t JDN 16m Cord 85psi/195cfm 593mm
6t JDN 50m Pendant 85psi/195cfm 593mm
12t JDN 15m Cord 85psi/195cfm 813mm
12t JDN 15m Pendant 85psi/195cfm 813mm
16t JDN 10m Pendant 85psi/195cfm 898mm
30t JDN 10m Pendant 85psi/250cfm 1260mm
Rigging Rentals maintain a large fleet of pneumatic chain hoists with well known brands such as JDN, Endo and Toku. We keep both air controlled pendent and cord control models and have heights of lift ranging from 3 to 50 metres, many of our hoists have chain buckets/bags fitted and many with the air filter/lubricator permanently plumbed to the hoist. All of our air hoists are maintained using genuine parts and are subject to continual off hire inspections and testing.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU15
ELECTRIC CHAIN HOISTS
WLL MAKE LIFT DETAILS POWERLEAD HEADROOM
2t Kito 15m 2 Speed 1.2 - 3.7m/min 4m/20amp 575mm
5t Hitachi 3m Single speed 2.8m/min 3m/20amp 1020mm
We provide an extensive range of heavy duty chain hoists that are capable of lifting 1 tonne up to 30 tonnes and are available in variety of hand chain lengths. Our air hoists are suitable for construction, offshore, maintenance, shutdown projects and engineered lifting applications.
We can re-chain our hoists to suit your chain fall needs subject to hire term and chain availability. Air hoists are very dependent on a reliable air volume, not high pressures over what is listed above. If in doubt about your air supply consult a specialist compressor supplier to asses your needs.
POWERED CHAIN HOISTS
BUILDERS HOIST
MODEL TBH-230A
Dimensions 240mm(L) x 180mm(W) x 600mm(H)
Width 180mm
Height 660mm
Capacity 230kg
Safety factor WLL x 1.5
Standard lift 30m
Motor power/amps 1.3/7
Lifting speed (p/min) 23m
Wire rope 5mm 7 x 19
Minimum grade wire rope G1900 IWRC
Continuous usage rate (p/h) 15 min
No. of starts per hour 300
Control cable 5m
Net weight 16kg
The Titan Builders Hoist is designed for building sites and is also suitable for various applications including warehousing, storage areas, elevator liftwell maintenance, factories in general, as well as domestic applications.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU16
CHAIN BLOCKS & HOISTS
CHAIN BLOCKS
LEVER HOISTS
WLL MAKE LIFT EFFORT TO LIFT
FALLS OF CHAIN
HEAD ROOM
WEIGHT
0.5t Ozblok/Vital 3m 23kg 1m 270mm 10kg
0.5t Ozblok/Vital 6m 23kg 1m 270mm 12kg
1t Ozblok/Vital 3m 30kg 1m 317mm 12kg
1t Ozblok/Vital 6m 30kg 1m 317mm 15kg
1t Ozblok/Vital 10m 30kg 1m 317mm 19kg
1t Ozblok/Vital 15m 30kg 1m 317mm 24kg
2t Ozblok/Vital 3m 35kg 1m 414mm 22kg
3t Ozblok/Vital 3m 27kg 2m 540mm 25kg
3t Ozblok/Vital 6m 27kg 2m 540mm 38kg
3t Ozblok/Vital 10m 27kg 2m 465mm 55kg
5t Ozblok/Vital 3m 41kg 2m 636mm 46kg
5t Kito 6m 41kg 2m 636mm 74kg
7.5 Kito 4m 35kg 2m 770mm 66kg
10t Kito 3m 40kg 2m 635mm 76kg
10t Ozblok/Vital 6m 39kg 4m 798mm 170kg
15t Vital 10m 41kg x 2 hand chains 8m 850mm 150kg
20t Ozblok/Vital 6m 42kg x 2 hand chains 8m 890mm 297kg
30t Ozblok/Vital 6m 42kg x 2 hand chains 12m 1200mm 370kg
30t Ozblok/Vital 12 42kg x 2 hand chains 12 1200mm 500kg
WLL MAKE LIFT EFFORT TO LIFT
FALLS OF CHAIN
HEAD ROOM
WEIGHT
3t Ozblok 1.5m 38kg 1 305mm 16kg
6t Ozblok 1.5m 39kg 2 550mm 27kg
We provide an extensive range of heavy duty chain hoists that are capable of lifting 1 tonne up to 30 tonnes and are available in variety of hand chain lengths. Our air hoists are suitable for construction, offshore, maintenance, shutdown projects and engineered lifting applications.
We provide an extensive range of heavy duty lever hoists for hire that are capable of lifting 250 kgs up to 9 tonnes, and are available in variety of chain lengths. Our air hoists are suitable for construction, offshore, maintenance, shutdown projects and engineered lifting applications.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU17
BEAM TROLLEYS & CLAMPS
BEAM TROLLEYS & CLAMPS
We carry beam clamps and beam trolleys in various styles from wind on push trolleys, bolt up push and geared trolleys. These are mostly used with chain blocks and air hoists. We can supply bulk quantities for shut downs and construction.
Key specifications:
• Beam clamps 1 - 10 tonne• Push beam trolleys 1 - 5 tonne• Geared Beam trolleys 3 - 20 tonne
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU18
We provide a range of winches for hire from leading brands Ingersoll, Toku, Pacific and Tactel. All air winches are supplied with NATA test certificates and are maintained to manufacturer standards. Our winches are available in variety of rope lengths and range in size from 300kg to 2 tonne capacities.
WINCHES
Key specifications:
• Half drum rating 4536kg• Speed 17m/min• Wire capacity to: 430m of 16mm, 236m of 22mm• Weight less wire 775 kg• Supplied with Norgren water trap/strainer• Minsup A hose coupling• Sub frame with forklift pockets• Supplied with load test certificate
INGERSOLL RAND 6KUL AIR TUGGER
NOTE: Winch wire supplied per customer requirements. Winch wire shown for load test only.
Key specifications:
• Tugger winch • Rating 2000kg • Duel braking• Wire 65m of 16mm, thimble end• Line speed approx. 6m/min • Weight including cable 365kg• Air filter/lubricator• Full sub frame• 500kg and 1000kg models available
Key specifications:
• High speed tugger winch. • Rating 1000kg• Dual braking• Wire 250m of 12mm• Line speed approx. 30m/min• Weight including cable• Air service unit• Excellent winch for long line pulls
INGERSOLL RAND HUL WINCH
TOKU TAW-2000 AIR WINCH
Key specifications:
• Single phase 240v• WLL 300kg• 175m x 6mm cable• Pendant control• Sub frame with bolt down points• Winch speed 10 - 15m/min (subject to duty cycle)
PACIFIC CWG 10151ELECTRIC WINCH
Genuine Tractel units with genuine factory winch wires, spare shear pins and rigging hardware.
Models available:
• T532 models 3.2t pull• T516 models 1.6t pull• Cables in 20 & 40m
TRACTELTIRFOR WINCH
Key specifications:
• Utility rating 4,990kg• Personnel rating 1,678kg• Speed 27 m/min• Features band brake, internal multi disc brake and drum safety guard. • Supplied with load test certificate.
BRADENMAN RIDER WINCH
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU19
JACKING SYSTEMS
HI FORCE TOUGH LIFT JACKS
We offer a variety of hydraulic jacking systems for hire in a variety of configurations including electric and manual systems and two or four way manifold systems which allow for control over multiple cylinders. Cylinder capacity ranges from 10 to 100 tonnes, making them suitable for a range of applications. All Hydraulic Jacking Systems are full tested and maintained to manufacturer standards.
HYDRAULIC JACKING SYSTEMS
We offer Hi Force pneumatic jacks for long and short term rental. The jacks have optional slip lock extensions and base mounting spacers that allows for varying height machines. These jacks have many applications in heavy equipment workshops for mine, rail and crane workshops.
Key specifications: • 100 tonne WLL• 405mm of stroke with 400mm extension• 6 bar with integrated filter/regulator/lubricator• Small footprint, large pneumatic wheels• Remote pendant controls with 6 metre lines• Tare weight 280kg
AIR LIFT BAG KIT
Rigging Rentals offer Durapac air lift bag kits for hire. The kits are suitable for a variety of applications including jacking of machinery, lifting forklifts for servicing, supporting pipelines, levelling structures, shutdowns and turnarounds and demolition works.
Eeach kit includes: • 2 x duel controllers• 2 x red 10m air lines• 2 x blue 10m air lines• 4 x pressure relief valves• 4 x 12 tonne air bags• Operating instructions• Sturdy Pelican transit case
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU20
LOAD ROLLERS, SKATES & TOE JACKS
TYPE WLL DIMENSIONS (mm) WEIGHT NO. OF WHEELS
Multi 360 2t 520 x 420 x 112 21kg 3
Multi 360 4t 595 x 470 x 112 34kg 5
Straight 6t 305 x 210 x 112 14kg 4
Steering 6t 360 x 270 x 105 22kg 4
Straight 18t 510 x 310 x 112 44kg 12
Steering 18t 810 x 515 x 112 52kg 12
Rigging Rentals provide a variety of load rollers for hire which are designed to move designed to facilitate the moving, positioning or installation of a wide range of loads. We offer several types including straight, steering and multi 360 degree options.
LOAD SKATES
TYPE WLL ON TOE
WLL ON HEAD
CLOSED HEIGHT
LIFT HEIGHT
WEIGHT
Masada 5t 10t 22mm 120mm 21kg
Masada 10t 20t 28mm 145mm 37kg
LOAD ROLLERS
We provide compact, lightweight Toe Jacks for hire in the 5, 8, 18 tonne capacities. Toe Jacks are suited to lifting loads in confined spaces and can be easily transported. All Toe Jacks are fully tested and maintained to manufacturer standards.
TOE JACKS
TYPE WLL DIMENSIONS (mm) WEIGHT NO. OF ROLLERS
Caterpillar 7.5t 210 x 100 x 65 5kg 6
Caterpillar 60t 380 x 168 x 125 32kg 10
Caterpillar 200t 914 x 356 x 171 201kg 14
Rigging Rentals provide load skates for hire in a range of capacities. Our Load Skates are supplied in a set of four and available in 7.5 tonne and 200 tonne capacities. They are suitable for a variety of applications such as moving heavy equipment, machinery and bridge structures.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU21
LOAD CELL SYSTEMS
TENSION LOAD CELLS
Rigging Rentals carry the Safe T Weigh brand of wireless tension cells available from 6.5 to 250 tonne, we have multiple units of most cells so we can cater for a multi point lift. Each unit comes with a hand held display unit that operates up to 100m radius ensuring operators can work at a safe distance from the lift site. All of our load cells have NATA certificates of calibration by a third party NATA accredited laboratory.
WLL TARE A B C D E
6.5t 2.5 260mm 100mm 28mm 47mm 34mm
12t 6.5 292mm 100mm 37mm 58mm 40mm
25t 7.0 370mm 125mm 53mm 75mm 55mm
55t 14.5 470mm 150mm 73mm 108mm 85mm
120t 40.0 640mm 220mm 98mm 160mm 115mm
150t 55.0 760mm 260mm 110mm 130mm 130mm
LOAD CELL SHACKLES
Rigging Rentals have MSL load cell shackles with the same wireless telemetry the standard tension cells use. The shackles are wide body super shackles and the load is evenly distributed on the load cell pin via a bobbin, we also have master links so multi attachment points can be gathered to the load pin.
Key specifications:
• Full wireless telemetry• 100 metre working radius• 70 hour battery life• NATA calibrated
A
DB
E
C
WLL WEIGHT D B L W P R N
85.0t * 335 kg 75mm 310mm 329mm 127mm 83mm 162mm 123mm
250.0t # 340 kg 130mm 520mm 540mm 200mm 130mm 240mm 190mm
*Standard Green Pin Shackle # Sling Saver Shackle
D
R
P
LB
W
P
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU22
LOAD CELL SYSTEMS
COMPRESSION LOAD CELLS - HIGH CAPACITY
Rigging Rentals have compression load cell systems for hire. Our four x 50 tonne systems can operate a single load cell through to four simultaneously back to a weather resistant display case. The display unit has built in re-chargeable batteries that allows use in a remote location. Other features include a built in printer with time and date recorded, this will print individual load cell readings. All of the equipment packs into a sturdy road case that allows secure shipping.
Display unit with printer and colour coded cables, easy to set up with automatic tare.
Compact low height compression cells with 20 metre cables
We have a high capacity compression load cells system which includes 4 x 200 tonne load cells. The four point system that will accommodate modules up to 800 tonne. The system is ideal for weighing large structures and to determine centre of gravity.
Previous projects have included:
• Fabricated ship blocks for Australian Defence force vessels.• Testing levy bank walls to 100 tonne in Tasmania.• Large fabricated modules prior to crane lifts at a Shell Refinery.
COMPRESSION LOAD CELLS
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU23
PADEYE TESTER
PADEYE TESTER
Rigging Rentals Padeye Tester for proof load testing of padeyes and lifting points. The unit is supplied with interchangable clevis connectors covering a full range of padeyes from 2t to 35t (refer chart below). The applied force is measured via a NATA certified calibrated compression cell and displayed on an LED indicator. Accuracy 0.1 to 1.5%.
WLL A B C D E F
2.0t 30mm 18mm 80mm 120mm 50mm 17mm
3.0t 25mm 22mm 80mm 115mm 50mm 22mm
4.7t 35mm 25mm 80mm 130mm 50mm 27mm
6.5t 35mm 28mm 80mm 140mm 50mm 32mm
8.5t 45mm 32mm 85mm 160mm 50mm 37mm
9.5t 45mm 35mm 90mm 160mm 50mm 37mm
12.0t 60mm 38mm 100mm 180mm 50mm 48mm
13.0t 60mm 42mm 110mm 180mm 50mm 52mm
17.0t 70mm 45mm 120mm 205mm 50mm 53mm
25.0t 75mm 55mm 120mm 230mm 70mm 52mm
35.0t 90mm 61mm 130mm 230mm 70mm 67mm
CF B
D
E
A
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU24
SEAFLEX TESTING EQUIPMENT
LIFEBOAT LOAD TEST SYSTEMS
We supply Seaflex Lifeboat Test Kits for hire. Supplied in transit box they contain all equipment required to test up to 7 tonne in lifeboats, platforms and other structures.
Each kit includes the following items:
• 18 x 375lt water bags = 6750kg of test weight• One manifold used to simultaneously fill 6 bags• All hoses & couplings• Ingersoll Rand pneumatic bellows pump
Optional fittings:
• Alternate camlock hose adaptors 3”, 2½” & 2”• Stortz adaptors in 38, 50 & 65mm• Additional long suction lines for difficult access boats
CAPACITY EMPTY HEIGHT
FILLED HEIGHT
FILLED DIAMETER
TARE WEIGHT
1t 2.40m 1.90m 1.60m 22kg
5t 4.00m 3.10 2.20m 58kg
10t 5.70m 4.80 2.30m 85kg
20t 7.40m 5.50 3.20m 160kg
35t 8.30 6.60 4.15m 240kg
50t 9.50 8.00 4.20m 416kg
SEAFLEX WATER LOAD BAGS
As the Australian agent for Seaflex™ we cater to a wide industry base with the bulk of our water bag business coming from the shipping and offshore segments. Seaflex™ Water Load/Weight Bags can be used individually or clustered for load testing of up to 300 tonne on one hook. They are ideal for testing cranes and are issued with fully completed log books, certificates and operating instructions.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU25
SEAFLEX LIFTING EQUIPMENT
SEAFLEX AIR LIFT BAGS
Often referred to as parachute lifting bags, the Seaflex Standard Range of underwater air lift bags is designed for supporting and lifting loads from any depth. While their single point attachment is ideal for lightening underwater structures such as pipes and templates, their main application is for lifting vessels and other loads from the seabed to the surface.
Built and tested in full compliance with IMCA D-016 - Revision 3, Seaflex air lift bags are in constant use with offshore and marine contractors all over the world.
CAPACITY PACKED DIMENSIONS
FILLED DIMENSIONS
TARE WEIGHT
250kg 0.4(L) x 0.2(W) x 0.4(D) 1.3(H) x 0.9(Ø) 3kg
500kg 0.5(L) x 0.3(W) x 0.5(D) 1.7(H) x 1.2(Ø) 5kg
1t 0.6(L) x 0.4(W) x 0.6(D) 1.9(H) x 1.6(Ø) 11kg
2t 0.8(L) x 0.4(W) x 0.8(D) 2.5(H) x 1.8(Ø) 23kg
3t 0.8(L) x 0.4(W) x 0.8(D) 3.2(H) x 2.0(Ø) 32kg
5t 0.9(L) x 0.5(W) x 0.9(D) 3.7(H) x 2.0.9(Ø) 38kg
10t 1.2 (L) x 0.5 (W) x 1.2 (D) 4.5 (H) x 2.5 (Ø) 75kg
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU26
TEST WEIGHTS
WEIGHT (kg) HEIGHT (mm) LENGTH (mm) WIDTH (mm)
4500 450 2000 2000
2000 1320 740 740
1000 200 1950 600
1000 810 690 690
500 510 690 690
250 410 690 690
100 200 500 200
50 200 300 200
25 100 150 200
SOLID TEST WEIGHTS
We provide an extensive range of test weights for hire, including solid steel cased weights. Our test weights range in size from 25kg to 4.5 tonnes. All test weights are fully certified and calibrated and ready for immediate use.
ELEVATOR TEST WEIGHTS
Elevator test weights are a critical component in the testing and certification of elevators and can be used for the servicing and repairs of elevators. Rigging Rentals offer the test weights in 200kg sets with 20kg increments.
CALL > 1300 RIG RENT (1300 744 736)
WEB > RIGGINGRENTALS.COM.AU27
MELBOURNE
Factory 8, 151 Dohertys RdLaverton Vic 3026Phone (03) 8360 8910melb@riggingrentals.com.au
BRISBANE
Factory 1, 9 Riverland DriveLoganholme QLD 4129Phone (07) 3801 5008bris@riggingrentals.com.au
PERTH
1/58 Discovery DriveBibra Lake W.A 6163Phone (08) 9494 1861perth@riggingrentals.com.au
SYDNEY
Unit 4, 19 Daniel StreetWetherill Park, NSW 2164P: 1300 744 736syd@riggingrentals.com.au
top related