REMOTE STARTER WITH UNIVERSAL BYPASS MODULE

RE

MO

TE S

TAR

TER

WIT

H U

NIV

ER

SA

L B

YPA

SS

MO

DU

LEI D W N

Your system includes:1-Main Control Module

with On-board Relay and Bypass Module1-Two Button Remote Transmitter1-9-Pin Wire Harness 1-4-Pin Wire Harness 1-Hood Pin Switch1-Warning Sticker for Under he Hood6-Heavy Gauge Wires

•••••

5

Transponder Key

You will not need to purchase part 791 for this is already built into the RS82B remote starter.

12

3

FOR LARGE GUAGE IGNITION AND BATTERY WIRES

FOR LARGE GUAGE IGNITION AND BATTERY WIRES

andin the posi ions

at the rear part of the unit.

side marked “+”

side marked “-”

side marked “+”side marked “-”

FOR THE 9 PIN HARNESS

Caution: Please check the position of the parking light switchon the back of the control module before the wire connection is made.

Connect the (BROWN) wire from the 9 pin harness to the vehicles parking light wire.

FOR THE 9 PIN HARNESS

( )

12

B

/Ignition #3 output 200MA

external

FOR THE 9 PIN HARNESS

factory remote’s

Door Lock m

otor wire

17-19

16

On the Blue / Black brake wire in the 9 pin harness.

IMPORTANT NOTICE:

Ground86

30

87a

8785Tie into heavy

white wire on4-relay harness

86

30

87

8785

INITIALIZATION PROCEDURE WHEN FIRST POWERED UP

14

and will respond to three (-) pulses to the blue (ama) wire in the 9 pin harness or three presses of the factory remotes lock button if hooked up.

motor

motor

The unit is now in aftermarket alarm mode and will

motorrespond to one (-) pulse of the blue (ama) wire in the 9 pin harness.

BULLDOG

three times remote

remote

14

27

B

B

B

BOX

again,

Inc

BOX

MEMO

29

MEMO

30