PROGRAM OBJECTIVES A strong foundation and knowledge in engineering fundamentals with a capacity to know how, when and where to use the knowledge in.

Post on 17-Jan-2016

212 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

Transcript

PROGRAM OBJECTIVES

A strong foundation and knowledge in engineering fundamentals with a capacity to know how, when and where to use the knowledge in specific ways;

An ability to identify, formulate, analyze and solve engineering problems and a capacity to integrate material from more than one subject and to apply appropriate engineering principles to arrive at correct and effective solutions;

A comprehensive knowledge in the fundamentals of engineering practice, including an ability to use analytical techniques, experimental and laboratory skills and modern engineering simulation and design software tools;

DEPARTMENT OBJECTIVES

Utilize the basic knowledge in mathematics,

science and engineering in Electronics and

Communication Engineering field.

Apply research based knowledge to design

and conduct experiments, analyze, synthesize

and interpret the data pertaining to Electronics

and Communication Engineering problems and

arrive at valid conclusions.

Electronics Communication

Digital Electronics Communication Theory

Signals and Systems Principles of Digital Signal Processing

Electronic Circuits- I Computer Architecture

Electronic Circuits II Computer Networks

Linear Integrated Circuits Antenna and Wave propagation

Microprocessor and Microcontroller Wireless Communication

VLSI Design Wireless Networks

Embedded and Real Time System Satellite Communication

Medical Electronics Optical Communication and Networks

RF System Design Optical Network

Electronics and Communication Engineering

4

EC 6304 ELECTRONIC CIRCUITS 1

L T P C3 1 0 4

B.E-ECEII Year /III Sem

Kalam batch

Handled ByG.Jayanthi

AP/ECE

PRE REQUISITE KNOWLEDEGE

ELECTRONIC DEVICES

CIRCUIT THEORY

AIM

The aim of this course is to

familiarize the student with the

analysis and design of basic

transistor Amplifier circuits and

power supplies

OBJECTIVE

On completion of this course the student

will understand.

To Learn about biasing of BJTs and

MOSFETs

To Design and construct amplifiers  

To Construct amplifiers with active loads  

To Study high frequency response of all

amplifiers

OUTCOMES

Upon Completion of the course, the students will be able to

Design circuits with transistor biasing.

Design simple amplifier circuits.

Analyze the small signal equivalent

circuits of transistors.

Design and analyze large signal

amplifiers

INTRODUCTION

Electronics means study of flow of electrons in

electrical circuits. The word Electronics comes from

electron mechanics which means learning the way

how an electron behaves under different conditions

of externally applied fields. IRE - The Institution of

Radio Engineers has given a definition of

electronics as "that field of science and

engineering, which deals with electron devices and

their utilization." Fundamentals of electronics are

the core subject in all branches of engineering

nowadays.

APPLICATIONS

Entertainment & Communication

Industrial Application

Defence Applications

Medical Services

TOP TEN CORE COMPANIES FOR ELECTRONICS AND COMMUNICATION IN INDIA

1. Bharti Airtel Ltd.2. Aircel3. Idea4. Spice5. Vodafone6. Virgin India7. Tata Indicom8. Reliance Infocomm9. Connect Ping10.Shyam Telecom

Rajasthan

New Companies like Unitech, Videocon, etc. entering the telecom

sector. AT&T Verizon India

UNIT I POWER SUPPLIES AND BIASING OF DISCRETE BJT AND MOSFET

Rectifiers with filters

DC Load line

operating point

Various biasing methods for

BJT-Design

Stability-Bias compensation

Thermal stability

Design of biasing for JFET

Design of biasing for MOSFET

Objective: To Learn about biasing of BJTs and MOSFETs

UNIT II BJT AMPLIFIERS

 

Small signal Analysis of Common Emitter

AC Load line

Voltage swing limitations

Common collector and common base amplifiers

Differential amplifiers- CMRR

Darlington Amplifier

Bootstrap technique

Cascaded stages

Cascode Amplifier

Large signal Amplifiers

Class A , Class B and Class C Power Amplifiers .

Objective :To Design and construct amplifiers

BJT

UNIT III JFET AND MOSFET AMPLIFIERS

Small signal analysis of JFT amplifiers

Small signal Analysis of MOSFET and

JFET Common source amplifier

Voltage swing limitations

Small signal analysis of MOSFET and

JFET Source follower

Common Gate amplifiers BiMOS

Cascade amplifier

Objective :To Construct amplifiers with active loads

UNIT IV FREQUENCY ANALYSIS OF BJT AND MOSFET AMPLIFIERS

Low frequency and Miller effect

High frequency analysis of CE and MOSFET

CS amplifier

Short circuit current gain

cut off frequency – fα and fβ unity gain

Determination of bandwidth of single

stage and multistage amplifiers

MOSFET

Objective: To Study high frequency response of all amplifiers

UNIT V IC MOSFET AMPLIFIERS

IC Amplifiers

IC biasing Current steering circuit using MOSFET

MOSFET current sources

PMOS and NMOS current sources

Amplifier with active loads - enhancement load,

Depletion load

PMOS and NMOS current sources load

CMOS common source and source follower CMOS

differential amplifier

CMRR.

Objective: To Study high frequency response of all amplifiers

N CHANNEL MOSFET

NMOS AND PMOS

TEXT BOOK

1. Donald .A. Neamen, Electronic Circuit Analysis and Design –2nd Edition,Tata Mc Graw Hill, 2009.

1. Adel .S. Sedra, Kenneth C. Smith, “Micro Electronic

Circuits”, 6th Edition, Oxford University Press, 2010.

2. David A., “Bell Electronic Devices and Circuits”,

Oxford Higher Education Press, 5th Editon, 2010

3. Behzad Razavi, “Design of Analog CMOS Integrated

Circuits”, Tata Mc Graw Hill, 2007.

4. Paul Gray, Hurst, Lewis, Meyer “Analysis and

Design of Analog Integrated Circuits”,

4thEdition ,John Willey & Sons 2005

5. Millman.J. and Halkias C.C, “Integrated Electronics”,

Mc Graw Hill, 2001.

6. D.Schilling and C.Belove, “Electronic Circuits”, 3rd

Edition, Mc Graw Hill, 1989.

REFERENCES

BOOK PROVIDED

URLhttp://www.kpsec.freeuk.com/trancirc.htmhttp://www.britannica.com/EBchecked/topic/128260/common-emitter-circuithttp://electricalandelectronics.org/2008/10/16/characteristics-of-enhancement-type-mosfet/http://www.allaboutcircuits.com/vol_4/chpt_10/8.htmlhttp://jas.eng.buffalo.edu/education/transistor/n_MOS_IV/mosfet.htmlhttp://www.youtube.com/watch?v=10R0Mrqwjuo/MOSFET drivinghttp://www.youtube.com/watch?v=BEp6NUQLBu/IGBT gate drivershttp://www.youtube.com/watch?v=P5FyVF5pyeM/MOSFET vs. IGBT Technologyhttp://www.youtube.com/watch?v=cyhzpFqXwdA/Diode Tutorial & How to build an AC to DC power supplyhttp://www.youtube.com/watch?v=ewbP968iIXk/MOSFET Transistor fundamentalshttp://www.youtube.com/watch?v=RREqQPsx9tU/CMOS 1http://www.youtube.com/watch?v=jVyyHfsAfyA/Bipolar Junction Transistor – BJThttp://www.youtube.com/watch?v=KtXE7s5DlcI/Biasing an Audio Transistorhttp://www.youtube.com/watch?v=IcrBqCFLHI/How Does a Transistor Work?

top related