Privatisation and Regulation of Business
Post on 03-Apr-2018
220 Views
Preview:
Transcript
7/28/2019 Privatisation and Regulation of Business
1/24
Privatisation and Regulation of Business
Assignment
Done By
1101101-1101120
7/28/2019 Privatisation and Regulation of Business
2/24
TABLE OF CONTENTS
TABLE OF CONTENTS......................................................................................2
ANNEX 5-2: CONCESSION CONTRACTS & PUBLIC-PRIVATE
PARTNERSHIPS.....................................................................3
1. WHATISA CONCESSION?.................................................................................3
1.1 Definition & application framework...........................................................3
1.2 Particularities in the application of concessions.......................................4
2. PUBLIC-PRIVATE PARTNERSHIPS.......................................................................8
2.1 What is a Public-Private Partnership (PPP)?...........................................8
2.2 Forms of Public-Private Partnerships (PPPs)..........................................9
2.3 PPPs compared to other types of contract.............................................14
2.4 Critical success factors for PPP contracts.............................................15
2.5 Advantages and drawbacks of the application of PPPs.........................16
2.5.1 Advantages of the application of PPPs .............................................16
2.5.2 Potential drawbacks of the application of PPPs.................................19
2.6 Steps in awarding and implementing a PPP contract............................20
2.7 PPP Projects in the EU and examples of sectors where PPPs are
applied..........................................................................................22
7/28/2019 Privatisation and Regulation of Business
3/24
on0242.ico
ANNEX 5-2: CONCESSION CONTRACTS & PUBLIC-PRIVATE PARTNERSHIPS
1. WHATISA CONCESSION?
1.1 Definition & application frameworkConcessions are not defined in the EU Treaty. The only relevant definition is found in the
secondary legislation (Community Directives etc.), where a special status is foreseen in
particular for public works concessions, together with a general reference regarding service
concessions.
The concept of concession is in principle defined by the Community legislator on the
basis of the concept of public contracts. In this context:
A public works concession is defined as a contract of the same type as a public
works contract, except for the fact that the consideration for the works to be carried out
consists either solely in the right to exploit the work or in this right together with
payment (Directive 2004/18/EC, Article 1, and Law 12(I)2006, Chapter VII).
Similarly:
A service concession is defined as a contract of the same type as a public service
contract, except for the fact that the consideration for the provision of services consists
either solely in the right to exploit the service or in this right together with payment
(Directive 2004/18/C, Article 1, par. 4).
This, however, does not mean that concessions are exempted from the rules of the Treaty.
As pointed out in the Commission Interpretative Communication on Concessions under
Community Law (2000/C121/2, p. 3), works or service concessions are subject to the rules
and principles of the Treaty.
Regarding public works concessions, Community Directive 2004/18 and Law 12(I)2006 of
the Republic of Cyprus contain specific provisions (Title III, Chapter I, and Chapter VII,
respectively).
Regarding service concessions, the Community and the national law provide that the
provision under these rules do not apply to service concessions (Directive 2004/18?EC,
Article 17, and Law 12(I)/2006, Article 16).
According to this definition, the main distinctive feature of a works concession is that a right
to exploit a construction is granted as a consideration for having erected it. This right may
also be accompanied by payment.
In general, if the contract is principally concerned with the construction of a work onbehalf of the Contracting Authority, then the Community legislator holds that it should be
considered to be a works concession.
n1398
7/28/2019 Privatisation and Regulation of Business
4/24
con0242.ico
on0242.ico
In contrast, a concession contract in which the construction work is incidental or which
only involves operating an existing work, is regarded as a service concession.
In a works concession, the risks inherent in exploitation are transferred to the
Concessionaire.
If recovery of expenditure were guaranteed by the Contracting Authority without the
risk involved in the management of the work, there would be no element of risk andthe contract should be regarded as a works contract rather than a concession contract.
Moreover, if the Concessionaire receives, whether directly or indirectly, during the course of
the contract or even when the contract comes to an end, payment (by way of reimbursement,
covering losses etc.) other than connected with exploitation, the contract could no longer be
regarded as a concession. In this situation, the compatibility of any subsequent financing
should be considered in the light of any relevant Community law.
The definition of a concession allows the Contracting Authority to make a payment in return
for work carried out, provided that that this does not eliminate a significant element of the risk
inherent in exploitation.By specifying that there may be payment in addition to the right to exploit the work, the
Community legislator states that operation of the structure must be the source of the
Concessionaire's revenue.
The determining factor in concessions continues to be the existence of the exploitation
risk in connection with the investment made or the capital invested, particularly when
the awarding authority has paid a sum of money. This applies as a general principle, even
though in most concessions the origin of the resources comes from payments made directly
by the users of the work (such as for example in the case of motorway tolls).
In concessions, the risks arising from the operation of the concession are transferred to theConcessionaire with the right of exploitation.
The division of specific risks between the Contracting Authority and the Concessionaire takes
on a case by case basis, according to their respective ability to manage the risk in question.
If the Contracting Authorities undertake to bear the risk arising from managing the work by,
for example, guaranteeing that the financing will be reimbursed, there is no element of risk
and the Community legislator considers such cases to be public works contracts and not
concessions.
In general, the correct approach to interpreting the above provisions requires, in order
for a contract to be designated as a concession contract, the assessment of its duration and
of the collection of a consideration from the operation of the work; this, however, should be
combined with the transfer to the contractor of the investment risk and operating risk which,
were they to remain within the sphere of control competence of the Contracting Authority,
might be indicative of a classic public works contract.
1.2 Particularities in the application of concessionsAs already mentioned, insofar as concessions result from acts of the Contracting Authority
the purpose of which is to provide economic activities or the supply of goods, they aresubject to the relevant provisions of the Treaty and to the principles which derive from
the Court case law in the respective areas.
n1398
n1398.
7/28/2019 Privatisation and Regulation of Business
5/24
on0242.ico
These rules and principles are already known and have been mentioned in several Chapters
of this Guide: they are the principle of equality of treatment, the principle of transparency, the
principle of proportionality, and the principle of mutual recognition.
In awarding concessions, the Contracting Authorities must adhere to the above principles of
the Treaty. More in particular:
The principle of equality of treatment
The application ofthe principle of equality of treatment to concessions (which is obviously
only possible when the Contracting Authority negotiates with more than one economic
operators as potential concessionaires) means that the Contracting Authority is free to
choose the most appropriate award procedure, especially in relation to the characteristics of
the particular project, and to lay down the requirements which candidates must meet
throughout the various phases of the relevant tendering procedure.
However, this implies that the choice of candidate(s) must be made on the basis of objective
criteria and the procedure must be conducted in accordance with the procedural rules and
basic requirements originally set by the Contracting Authority.
Where these rules have not yet been set, the application of the principle of equality of
treatment requires in any event that the candidates be chosen objectively.
The Court of Justice of the European Communities (ECJ) had the occasion to set out
the scope of the principle of equality of treatment in the area of public contracts, by
asserting on the one hand that this principle requires that all tenders conform to the terms of
the contract, so as to guarantee an objective comparison between tenders (Judgement of 22
June 1993, Case C-243/89, Storebaelt, point 37), and, on the other hand, that when an
Contracting Authority takes account of changes to the initial tenders of only one tenderer,
who thereby obtains an advantage over his competitors, then the principle of equality of
treatment of the tenderers is violated and the transparency of the procedure is impaired.
Moreover, the Court notes that the procedure for comparing tenders has to comply at every
stage with both the principle of the equal treatment of tenderers and the principle of
transparency, so as to afford equality of opportunity to all tenderers when formulating their
tenders (Judgment of 25 April 1996, Case C-87/94, Walloon Buses. See also Judgment of
the Court of First Instance of 17 December 1998, T-203/96, Embassy Limousines &
Services).
In certain cases, the Contracting Authority may be unable to specify its requirements
in sufficiently precise technical terms, and will look for alternative tenders likely toprovide various solutions to a problem expressed in general terms. In such cases, however,
in order to ensure fair and effective competition, the documents issued by the Contracting
Authority must always state in a non-discriminatory and objective manner what is asked of
the candidates and above all the way in which they must draw up their tenders.
In this way, each candidate knows in advance that he has the possibility of proposing various
technical solutions.
More generally, the documents issued by the Contracting Authority must not contain
elements that infringe the abovementioned rules and principles of the Treaty.
The requirements of the Contracting Authority may also be determined in
collaboration with economic operators, provided that this does not restrict competition.
n1398
7/28/2019 Privatisation and Regulation of Business
6/24
on0242.ico
on0242.ico
on0242.ico
The principle of transparency
The principle of transparency can be ensured by any appropriate means, including
advertising, taking into account the particularities of each project.
For example, transparency can be ensured, among other means, by way of
publishing a Concession Notice or a pre-information notice in the daily Press or in
specialist journals, or by posting appropriate notices
This type of advertising generally contains the information necessary to enable
potential concessionaires to decide whether they are interested in participating
(selection and award criteria, etc.). This information also includes the subject of the
concession and the nature and scope of the services expected from the Concessionaire.
The principle of proportionality
According to the principle of proportionality, any measure chosen should be both
necessary and appropriate in the light of the objectives sought.
When applied to concessions, this principle allows Contracting Authorities to define the
objective to be reached, especially in terms of performance and technical
specifications. This implies that any measure chosen must be both necessary and
appropriate in relation to the objective set.
Thus, for example, when selecting candidates, a Contracting Authority may not
impose technical, professional or financial conditions which are excessive and
disproportionate to the subject of the concession.
The principle of proportionality also requires that competition and financial stability be
reconciled. Therefore, the duration of the concession must be set so that it does not limit nor
restrict open competition beyond what is required to ensure that the investment is paid off
and there is a reasonable return on invested capital, whilst maintaining a risk inherent in
exploitation by the concessionaire.
The principle of mutual recognition
The principle of mutual recognition has been laid down by the Court Case law andgradually defined in greater detail in a large number of judgments on the free circulation of
goods, persons and services.
According to this principle, a Member State must accept the products and services
supplied by economic operators in other European Union countries, if the products
and services meet in like manner the legitimate objectives of the recipient Member State.
The application of this principle to concessions implies that the Member State in which the
service is provided must accept the technical specifications, checks, diplomas, certificates
and qualifications required in another Member State, if they are recognised as equivalent to
those required by the Member State in which the service is provided.According to the Community Directive and the national transposition law on public works
concessions, the following also apply within the framework of the principles of the Treaty:
I n0728.i
7/28/2019 Privatisation and Regulation of Business
7/24
In terms of advertising, Contracting Authorities wishing to award a public works
concession contract shall make known their intention by means of a relevant notice.
Such notices shall be published in the OJEU and in the national Press.
Notices concerning public works concessions contain the information listed in Annex
VIIC of Directive 2004/18/EC, and any other information which the Contracting
Authority may consider necessary, and are submitted using the standardised forms of
the European Commission.
In terms of time limits, when Contracting Authorities resort to a public works
concession, the time limit for the presentation of applications for the concession usually
cannot be less than 52 days from the date of dispatch of the notice.
Chapter VII of Law 12(I)/2006 presents in detail the rules applicable to public works
concessions. These rules concern, inter alia, time limits, subcontracting, awarding of
additional works to the concessionaire, contracts awarded by the concessionaire to third
parties etc.
7/28/2019 Privatisation and Regulation of Business
8/24
on0242.ico
on0242.ico
2. PUBLIC-PRIVATE PARTNERSHIPS
2.1 What is a Public-Private Partnership (PPP)?A Public-Private Partnership (PPP) is a public contract concluded for a long period oftime (usually 15 to 30 years) between a public sector entity and a private sector entity
for the construction of infrastructure works and the provision of services of a public nature.
This type of contract is increasingly applied in the European market, and also in the market
of the new EU Member States.
PPPs refer to various forms of cooperation of private investors with the public authorities,
which also include Local Authorities, for ensuring all or part of the financing, construction,
renovation, management and maintenance of an infrastructure, or the provision of a service,
in sectors where full deregulation of the market is either unfeasible or undesirable.
On the basis of the contract entered into, the private partner undertakes to finance,design and construct the project and operate it for the period of time agreed in the
relevant contract. When the contract expires, the operation of the project is undertaken by
the Public Authority on whose behalf the contract was entered into. The Contracting Authority
of the public partner determines the framework and the requirements of the tendering
procedure (tender documents), and the private partner assumes the construction risk and
operation risk for the project and, is remunerated during the projects operation phase by way
of a consideration (monetary or otherwise) which it receives either from the Contracting
Authority or the public authority on whose behalf the project is put out to tender, or directly
from the users, or in some cases by both (the public sector & the users). If the
consideration is paid directly from the users, then the private partner undertakes theexploitation risk.
The participation of the private sector in the implementation of works and services is either in
the form of an associated partner for their implementation, or in the form of service provider
to the public sector.
The key distinction that can be made in terms of the contractual contents of PPPs is
their distinction in compensatory contracts, where the use of the infrastructure/service
is borne directly by its users, and in non-compensatory contracts, where usage costs are
assumed by the public sector through regular payments, on the basis of concrete
specifications regarding service quality and availability.Through PPPs, the public authorities aim to improve the quality of the services provided to
the citizens, achieve savings in the resources of the public sector and of the local authorities
which may be channelled to the implementation of additional projects and programmes, and
utilise the advantages, experience, know-how and operation methods of the private sector.
The international experience has shown that PPPs make possible the provision of high-
quality services and goods that meet the requirements of citizens in a cost-efficient and
effective manner. Indicatively, from the efforts and contracts entered into to this date, it has
been found that the successful implementation of PPPs has lead to reductions of 15-20% in
the overall financial cost of the provision of the public service foreseen, compared to thetraditional procurement methods.
n1398.
7/28/2019 Privatisation and Regulation of Business
9/24
on0242.ico
On the other hand, the use of PPPs should not be presented as the only one or the
best solution for a public entity facing budget constraints. To proceed to the
application stage, the financial and organisational choices made in setting up the partnership
to carry out the project must offer real value added value compared with other options (such
as the conclusion of a more traditional method).
The success of a PPP in practice depends to a great extent on the completeness of
the contractual framework to be agreed, and on the precision and clarity of the terms
to govern its implementation. Clear separation of roles, precise assessment and, in
particular, optimum distribution of risk between the two parties, together with the clear
definition of the responsibilities undertaken by each one of them, are of decisive importance.
The scope of the cooperation and the risks associated with it must be distributed between
the parties according to the respective ability of each party to assess and control them more
efficiently and thus achieve the best possible utilisation of its skills, capacities and
experience.
2.2 Forms of Public-Private Partnerships (PPPs)During the last 20 years, various contractual PPP forms (PPP contracts) have been
developed and tried internationally.
All these forms have a minimum common core:
The relatively long duration of the contractual relationship.
The total or partial funding of the project by the private partner, often through complex
arrangements.
The important role of the private partners, who ensure the projects financial
parameters, as opposed to the role of the public partner, who ensures the publicinterest (objectives, quality, pricing policy etc.).
The distribution of risks between the public sector and the private partners, in such a
way that the latter assume management of inherent risk factors which, in the case of
public works, are today assumed by the public sector.
The Green Paper issued by the European Commission in 2004 (COM(2004) 327 final,
Brussels, 30-04-2004), distinguishes between two forms of PPPs:
PPPs of a purely contractual nature, in which the partnership between the public and
the private sector is based solely on contractual links, with a further distinction between
concession contracts, characterised by the direct relationship between the private
partner and the end user, under the control of the public sector, with payment in the
form of fees imposed on the users, and Public Finance Initiative (PFI) contracts, in
which the private partner is required to implement and manage a public administration
infrastructure (school, hospital etc.), with payment in the form of regular payments
made by the public sector (availability fee), and
PPPs of an institutional nature, involving cooperation between the public and the
private sector within a distinct entity (Special Purpose Vehicle or SPV).
There are many types of PPP contracts, which are adapted to each particular project.
Their main advantages, provided that there are applied properly, are:
The need to secure funds of the State budget,
I n0728.i
7/28/2019 Privatisation and Regulation of Business
10/24
The quality improvements in infrastructure construction and service provision,
The mobilisation of private sector know-how on project design and implementation, and
The significant curtailment of lifecycle costs for a project or service.
The most widely used forms of PPP contracts are listed in the Table below:
Table 1: Most widely used PPP forms
B.O.T. (Build-Operate-Transfer) & BOOT (Build-Own-Operate-Transfer)
D.B.F.O. (Design - Build - Finance - Operate)
B... (Build - Transfer - Operate)
B.O.O. (Build - Own - Operate)
B.B.O (Buy - Build - Operate)
L.R.O (Lease - Rehabilitate - Operate)
B..L.T (Build - Own - Lease - Transfer)
O.M. (Private Services Contract : Operation and Maintenance)
O.M.M. (Private Services Contract : Operation, Maintenance and Management)
In particular, these PPP forms involve the following:
... (Build Operate Transfer)and .... (Build Own-Operate Transfer)
The private contractor constructs, maintains and operates the project, on the basis of the
specifications agreed with the public sector. The project is either owned by State entities
(B.O.T.) or assigned for a predetermined period of time to the private partner (B.O.O.T.), who
upon expiry of the exploitation period (concession), transfers to the public sector the projects
operation (BOT) or ownership (BOOT). In most cases, the private partner is responsible forpart or for the entirety of the financing for the project.
This form, considered as the most widely used of all PPP forms, was for example adopted by
Greece for the construction of large-scale infrastructure projects, such as the
ELEFTHERIOS VENIZELOS airport, the Spata-Elefsina Freeway, the West Immitos Ring
Road, and the Rion-Antirion Bridge.
D.B.F.O. (Design-Build-Finance-Operate)
The private partner is responsible for the design, construction, operation and financing of the
asset, and recovers the capital invested through the payments made by the public sector forthe services provided during the contract. Upon expiry of the contract, ownership of the asset
is transferred to the public sector. The DBFO model is the basic model for contracts involving
the development of public sector infrastructures and assets, when the possibilities of parallel
commercial exploitation are in principle unknown and may potentially be limited.
... (Build-Transfer-Operate)
In this form, the private partner designs, finances and constructs the project. After
completion, ownership of the project is transferred to the public sector, who then agrees to
lease the project to the aforementioned private partner for a predetermined period of time.
During this time, the private partner manages the project and collects the revenues from its
operation.
n1398
7/28/2019 Privatisation and Regulation of Business
11/24
on0242.ico
... (Build-Own-Operate)
In this form, the public sector approaches the private sector with a view to implementing a
public utility project. The public sector grants a long-term operating license to the private
partner, who assumes the responsibility for financing, designing, erecting and operating the
project. In this particular form of PPP, the private partner owns the project, while the public
sector establishes precisely the operating specifications regarding the services provided, the
safety regulations and the maximum level of the fees, if any, for using the project (e.g. tolls).
... (Buy-Build-Operate)
Within the framework of attracting private venture funds, the public sector sells existing public
utility installations to private sector entities, with the aim of securing the realisation of
additional investments for them (renovation-expansion), in order to take advantage of the
construction and administration skills of the private sector, mitigate the risks resulting from
owning and operating the project, and capitalising on the significant economic value of
existing infrastructure works. The private partner operates these installations as a profitable
utility project under State supervision.
L.R.O. (Lease-Rehabilitate-Operate)
In this form, the private partner leases existing facilities from the public sector, invests its own
funds for modernising or expanding them, and then undertakes their operation and
exploitation for a predetermined period of time, under a contract entered into with the public
sector, who owns the project.
B.O.L.T. (Build-Own-Lease-Transfer)
In this form, the private partner finances and constructs the project, and then leases it to thepublic sector through a leasing agreement. The public sector makes regular payments to the
private partner, through which ownership of the project is gradually transferred to it. At the
end of this period, the public sector has full ownership of the facilities, or can purchase them
for a price determined in the leasing agreement. During the term of the lease, operation of
the facilities is undertaken either by the public sector or by the private partner.
.. (Private Services Contract: Operation and Maintenance)
By awarding an OM private services contract, the public sector assigns to the private partnerthe operation and maintenance of a project but retains ownership and management of it.
... (Private Services Contract: Operation, Maintenance and Management)
This form concerns the award of an integrated private services contract, whereby the public
sector assigns to the private partner the operation, maintenance and management of a
project but retains ownership of it.
The distinction between the above forms of PPPs is defined within the two extreme
boundaries of concession and ownership, and is a function of the distribution of risks
between the parties involved and of the financing arrangements between the contractingparties (public sector funding agencies / banks contractors/shareholders).
This distribution is shown indicatively in the Figure below:
7/28/2019 Privatisation and Regulation of Business
12/24
Figure 1: Types of contract as a function of the distribution of risks between the parties
involved and of the financing arrangements
The organisational chart that follows shows a typical organisation of a PPP contract,,
where the core comprises the contract and the private party (Special Purpose Vehicle)
entering into contract with the public sector. Payment for the project or for the service
provided by the SPV takes place over the term of the contract, either through the exploitation
of the facility or through regular payments by the public sector, in line with the attainment of
predetermined quality and availability targets. The private partner usually undertakes,
through a tender procedure, to design, finance, construct, operate and maintain the project
for a period of 15 to 30 years.
n1398
7/28/2019 Privatisation and Regulation of Business
13/24
Figure 2: Typical organisation of a PPP contract
The Figure below presents the parties involved in PPPs and their interrelationships.
Central to a PPP structure is the Special Purpose Vehicle (SPV), which is established
exclusively for the purposes of the project and enters into contract with the other project
entities through a complex system of contracts that ensures the clear distribution of risks.
Roles and responsibilities:
Contractor : own funds, know-how;
Construction Contractor : construction, maintenance, adherence to construction schedule;
Market: the market to benefit from the development of an efficient and socially acceptable
solution;
Manager : assumes the risk of return on the investment made, and part of the long-term
management of the asset;
Public Sector : legal framework, main part of the contracts, contribution in money;
Banks : financing structure, know-how, provision of funding through a financially viable
arrangement.
7/28/2019 Privatisation and Regulation of Business
14/24
on0242.ico
Figure 3: Participants in PPP arrangements and their interrelationships
It should be noted that where the Public Sector wishes to retain a shareholding interest in the
Special Purpose Vehicle, its participation is limited to 49%.
However, the most common practice is for the public sector not to participate in the share
capital of the SPV. In this case, if the construction is made on a plot owned by the public
sector, this is granted to the SPV together with the exploitation rights for the plot and for any
buildings erected on it.
2.3 PPPs compared to other types of contractPPPs can offer significant advantages to the implementation of a project with the best value
for money, allowing public sector entities a relative fiscal flexibility, as it provides them with
an opportunity for securing the public expenditure required for the project or for converting
short-term obligations into a series of long-term regular payments while in parallel exploiting
in terms of fiscal planning the resulting difference to improve their macroeconomic figures,
but in practice also for other purposes, such as the creation of infrastructures which, because
of fiscal restrictions, could not be financed directly.
It is however clear that the complexity of the resulting contractual relationship, and the
very fact of public assets and services being assigned through PPPs to economic
operators who by default operate on the basis of, and are motivated by, business profit, do
not leave much room for experimentation in the procedure followed for selecting this method
as more advantageous in comparison to other options available. Thus, in order to opt for this
implementation method, the difference in the value added should, in terms of the financial
and social end result, be undisputed.
The Table below summarises the conditions necessary for deciding on the initial
suitability of a PPP solution and on the need to further investigate its adoption:
Table 2: Conditions for investigating the award of a PPP
Existence for the need to carry out an extensive investment programme that requires themanagement of risks associated with construction and with the provision of services.
Banks / Funding Agencies
Investor
Special Purpose Vehicle
(SPV)
Market
Guarantees
Shares
CashContribution in kind
FundingGuarantees
Shares
Service ContractManagement Contract
Manager
Shareholding ourceP Contracts in terms ot time anc cost ...ncentive for the felivery s for servi
Contractor
Construction Contract
Public Sector
I n1310.ico
Funding
7/28/2019 Privatisation and Regulation of Business
15/24
The private sector know-how and specialisation required to implement the project exists, and it isestimated that it can offer good value for money for the project.
The type of the service envisaged is such that the public sector entity may specify it on the basis ofoperating specifications for the duration of the contract.
Whole Life Costing (WLC) can be established for the project/service.
Demand for the project/service concerns a long period of time and a growing client base.
The technology incorporated in the implementation of the project/service is not expected to bemodified significantly (and in any case, not beyond the possibility of adaptation) over the next years.
In assessing PPPs as an option against other forms of contract, the criteria listed in
the following Table may be used:
Table 3: Criteria for assessing PPPs as an option against other forms of contract
The techno-economic result of the project for the public sector entity. This involves issues related tothe costs for implementation and operation of the project and/or the provision of the servicethroughout its lifecycle compared to the implementation and provision of the service by the publicsector, to the quality operation specifications and the relevant checking procedures, to the required
level of quality upon expiry of the contract etc.The expected compensatory nature and functionality of the project for its users (socio-economicresult) in terms of the provision of the particular service, but also in terms of its complementarity toother services of a public nature.
Sufficient size, so that the project may be bankable for credit institutions, whose contribution (and theterms governing the relevant agreements) is a key element of the project. In the case of PPPs, animportant aspect which usually is underestimated is the cost of the award procedure, both for thepublic sector entity and for the tenderers, and its proportion to the cost of the project.
Financial viability, so that the project is attractive to the private investors who will tender for it.
In addition to the above criteria for assessing PPPs as an option against other forms of
contract, the following Table lists some critical factors affecting their adoption:
Table 4: Critical factors affecting the adoption of PPPs
The expected development result of the project. The project should form part of, and contribute to,the public sector entitys development planning, in terms of its result at the level of the provision ofthe service to which it refers, as well as in terms of its overall impact on its operation, on socialdevelopment and on its economic environment.
The long-term political will to implement the project.
The social acceptance of the project, at least during a first period in the implementation of the PPP.In what regards Local Authorities, for example, the project must complement social andadministrative structures and acquired employment rights, rather than attempt to substitute them.
The institutional and legal framework for implementation, which must ensure clear terms for theproject.
The trade, financial or other rights regarding the provision of the envisaged service.
2.4 Critical success factors for PPP contractsThe Table below lists the critical factors affecting the success of PPP contracts,
grouped according to whether or not they are controlled or affected by the public or
private sector, or by both.
Table 5: Critical factors for successful development of PPP contracts
Factors controlled or affected by the Public Sector
Determination of political priorities in relation to the projects to be developed
I n1310.ico
I n1310.ico
I n1310.ico
7/28/2019 Privatisation and Regulation of Business
16/24
Commitment of the public sector to these forms of partnership
Coordination between public services and entities
Capability of the public sector to respond to the requirements of contracts of this form (negotiations,monitoring, checking, evaluation)
Attracting interest from the market (viability and attractiveness of projects)
Financial affordability of the project for the public sector
Suitable economic, legal and institutional framework
The environment within which the project is developed
The projects particular characteristics
The duration of the contract
Standardisation for curtailing costs and determination of effective procurement procedures
Factors controlled or affected by the Private Sector
Capability of the market to respond to the requirements of the public sector and of the project
Financial viability of project implementation from the viewpoint of the private sector
Possibility for the private sector to achieve acceptable profit
Factors controlled or affected by both
Sufficient funding ensuring completion of the projects
Compatibility of contracts with the applicable legal and institutional framework
Structuring and Management of contracts (determination of minimum specifications, paymentmechanisms etc.)
Identification, effective management and suitable distribution of risks
Know-how and experience
2.5 Advantages and drawbacks of the application of PPPsThe advantages and drawbacks of the application of PPPs are the following:
2.5.1 Advantages of the application of PPPs
The advantages of the application of PPPs for the public sectorare the following:
Improvement of infrastructures and assets Flexibility
PPPs can be developed in many key infrastructure activity areas, such as water supply,
energy, telecommunications, roads, transport, hospitals, schools, prisons, accommodation of
offices and departments, museums etc., as well as in the area concerning the development
of the public sectors real estate property. In all these cases, PPPs help bring about
improvements in innovation and in the quality and quantity of supplies/services/assets.
High-quality services Improved project management
The quality of the services provided through PPP contracts may be higher than that obtainedin the classic way, as a result of innovation, competition, performance incentives and
planned maintenance throughout the project lifecycle.
7/28/2019 Privatisation and Regulation of Business
17/24
Innovation Savings in time and money
The specialisation and experience of corresponding projects available in the private sector
offers an opportunity for developing innovative solutions, reducing project delivery cost and
time, and improving functional design, construction, and process management. The
processes to be developed can serve as standards for future projects, to which they could
also be applied.
Provision of services at a lower total cost
The net present value of the total cost of the services provided through PPPs, if the
corresponding arrangements and the contract have been structured and applied correctly, is
lower than the cost borne by the public sector when the procurement of the corresponding
supplies or services is made in the classic way. Although the financing of the project by
private funds may involve additional costs, as the borrowing cost for the private sector is
usually higher than that for the public sector, these costs may be compensated by the
synergies developed by combining the design, construction and operation of the project
under the same economic operator. These synergies may lead to reductions in operating andmaintenance costs and to improvements in the level of the services provided (value for
money), resulting in a total cost for the development and operation of the project which is
lower than that obtained through the classic procurement approach. Financing of the
project by private funds and the transfer of the responsibility for operation to the private
sector, usually results in the avoidance of cost overruns and in the adherence to the
construction schedule, two factors which are very difficult to control under the conventional
method followed for the procurement of supplies and services.
The Figure below presents the differences, in terms of time and money, between public
works contracts and PPP contracts.
Cost
overruns
Estimated
investmentcost
Timeoverruns
Estimated operation/maintenance cost
Operation/maintenance cost overruns
Payments
Years
0 5 10 15 20
Construction
Period Operation & Maintenance Period
Public Works Contracts
No payments
made until theproject is
completed
Payments for availability
Payments for usage
Payments
Years
0 5 15 20
Construction
Period Operation Period
PPP Contracts
7/28/2019 Privatisation and Regulation of Business
18/24
Figure 4: Differences between Public Works Contracts and PPP Contracts in terms of time and
cost (Source: IFS/PWC)
Transfer of risks
The identification of the risks associated with the project and their distribution between the
public and the private sector on the basis of their respective ability to manage and control
more effectively each risk, is perhaps the most important benefit of PPPs. This distribution
usually involves the following risks: design, construction, operation, technological change,
financing, market, legal etc.
The Figure below shows the distribution of risks between public and private sector:
Figure 5: Risk distribution between Private and Public Sector (Source: IFS / PWC)
Improvement of the performance and effectiveness of the new services
By allocating each risk to the entity best able to handle it, and by linking the payments for
services provided to performance, PPP contracts may serve as clear incentive for thedelivery of projects on time and without cost overruns, and for ensuring adherence to the
desired specifications throughout the duration of the contract. The public sector shall pay the
entire amount of payments only when the services provided meet fully the desired level and
the specifications (payment mechanism). In contrast, in the case of public contracts, the
maintenance and operation of the asset depends on the availability of corresponding funds
under the State budget, and on the effective implementation of relevant programmes by
entities who do not always have available the infrastructure required.
Clear commitment to the client/citizen
The development of PPPs by the public sector is aimed at meeting its needs and
requirements in connection with the services required, rather than managing the existing
procedures for the provision of services. This shift in focus from the management of
procedures to the quality of the produced result is a determining factor in the promotion and
development of innovative solutions and in improving the relationship between the public
sector and the citizens.
Differentiation of services
The development of PPPs enhances competition and, through the introduction of
benchmarks, allows comparisons the quality and production costs for the services providedto be compared to those of similar services in the market, a development that helps improve
productivity and effectiveness.
Public Sector: Risk assumption Risk Transfer or Assumption Private Partner: Risk transfer
Required licenses/permits
Institutional framework(taxes, spatial planning etc.)
Inflation
Demand (usage / size)Residual ValueForce majored events
Design
ConstructionOperationFinancing
Technology
7/28/2019 Privatisation and Regulation of Business
19/24
Funding Development of more projects
The use of private capital in the construction and development of projects can accelerate the
infrastructure development programme and help keep public expenditure within the budgeted
cost, eliminating overruns and the need for additional funds.
Broader economic benefits
By helping develop and bring to completion a significant number of projects during periods of
budgetary restrictions, the development of PPPs may act as incentive for the private sector,
mobilising resources that may help to increase employment and achieve economic growth.
Know-how
The application of PPPs assists the transfer of know-how to the public sector, through its
cooperation with the private sector.
The advantages of the application of PPPs for the privatesectorare the following:
Participation in public projects and joint ownership of the assets.
Attractive profit margins.
Long-term contracts.
2.5.2 Potential drawbacks of the application of PPPs
Implementation complexity
PPPs are characterised by increased complexity in their implementation, due to the
necessary changes in the institutional framework and to the complex set-up of contractswhich should foresee all potential risks and the ways in which to address them, in order to
achieve the distribution of each risk to the party best suited to manage it.
High partnership structuring costs
Because of their complexity, the cost associated with the development of PPPs during the
stage of their formulation may be considerably higher than the costs to result through the
conventional procurement methods for assets and services. Of course, this does not
necessarily mean that the total cost of the project shall be higher compared to that of the
conventional procurement method.
Higher borrowing cost
The borrowing for the private partner is usually higher than that for the public sector and,
given that the private partner will seek a high borrowing rate, the financial cost of the project
may be increased. Of course, this does not necessarily mean that the total cost of the project
shall be higher compared to that of the conventional procurement method.
Ineffective contract management
Proper monitoring and checking of the contract may not be available, resulting in failure to
achieve the desired results (level of services, payment mechanism, assumption of risks etc.).This may be due either to a lack of know-how or to the absence of suitable monitoring
procedures.
7/28/2019 Privatisation and Regulation of Business
20/24
on0242.ico
Lack of competition
In the case of a PPP contract, the presence of competition contributes to the development of
innovative solutions and to the improvement of the effectiveness in the provision of services.
However, the result intended may not be achieved in cases of weak or limited competition or
where the number of private partners able to provide these services (i.e. having the
knowledge, capacity, and resources required) is small..
It is important to note here that several of the drawbacks of PPPs can be minimised
through proper planning, structuring and implementation of the project. For example,
the initial financial viability study should document that the total economic benefit from such a
structure may exceed the higher cost of structuring the partnership and the financing cost
(value for money). In addition, clear support by the State is required at the political, legislative
and institutional level.
2.6 Steps in awarding and implementing a PPP contractThe figure below presents the steps of a typical PPP procedure. The time required forcompletion of such a procedure, from the publication in the OJEU to the signature of the
contract, varies from 14 to 24 months.
7/28/2019 Privatisation and Regulation of Business
21/24
Figure 6: Steps of a typical PPP procedure
The Table below summarises the key conclusions regarding the application of PPPs.
Table 6: Conclusions regarding the application of PPPs
PPPs are a reliable alternative for implementation of numerous infrastructures of the public sector, and
of the management and operation services associated with them.
Savings in time and cost may be achieved.
Private financing may be more expensive than public funding, but in all cases the introduction of acompetitive procedure leads usually and under the right circumstances to solutions which are moreeconomic overall (construction, operation and maintenance).
The legislative and institutional framework must be determined or enhanced.
As a rule, the quality of the services provided through the development of PPPs is improved, while thepublic sector may specify and check the quality of the services provided. As the payments made to theprivate partner are linked clearly to the quality of the services provided and to the attainment of aspecific quality level, the achievement of the objective acts as an incentive driving the efficiency andeffectiveness of the private sector and the quality achieved is better than that obtained through thetraditional procurement approach.
The public sector maintains control over public assets, as risks and responsibilities regarding the day-to-day management of the services provided are transferred to the private sector selectively. In any
Preparation of TenderProcedure (Public Sector)
Official Journal of the EuropeanUnion (OJEU)
Prequalification Documents Invitation of Requests to
Participate
Prequalification of Candidates
Tender Submission Documents
Evaluation Selection of Candidate
Contractor
Contract Signature Contract Management
Determination of business needAssessment of alternatives for project implementation and of the suitability of the
project for developing PPP/PFI solutionsDocumentation of the overall economic benefit from the project (value for money)Initial market soundingSecuring of the approvals required to proceed with the solutionEstablishment of Project Team
Publication in the OJEU
Preparation of prequalification documentsDispatch of documents to the interested economic operatorsSubmission of requests to participate by the candidates
Evaluation of requests to participatePrequalification of candidates (usually 5 6)
Preparation of tender submission documentsDispatch of documents to the prequalified candidatesSubmission of tenders by the prequalified candidates
Evaluation of submitted tenders on the basis of the specified technical, financialand legal criteria
Selection of candidate Contractor
Final discussions and negotiations for signature of the contractContract Management
7/28/2019 Privatisation and Regulation of Business
22/24
case, the public sector maintains control over the possibility of adopting and imposing policies,specifications and regulatory interventions.
2.7 PPP Projects in the EU and examples of sectors where PPPs areapplied
The maps and tables in this section present applications and examples of PPPs in the EU.Source: European Investment Bank, Dexia Credit
IrelandPPP Act 2002EducationHealthTransportWater Supply Networks
BelgiumPPP Decree 2003TransportWater Supply NetworksEducationEducation
NetherlandsPPP Task Force 1999TransportWater Supply NetworksHealthPrisons
FinlandTransportEducationHealthWater Supply Networks
FranceLOPSI, LOPJI 2004Ordonnance MatteiOrdonnance PPPEducationHealthTransportInfrastructuresPrisons
PortugalPPP Law 2003
TransportHealthPrisonsWater Supply NetworksEducation
SpainPPP Law 2003TransportHealthEducationWater Supply Networks
ItalyMerloni Law 2001-4TransportHealthWater Supply NetworksEducation
GreeceTransportTourism
GermanyPPP Task Force 2003DefenseWater Supply NetworksInfrastructuresRoads
7/28/2019 Privatisation and Regulation of Business
23/24
PolandLegal framework under preparationWater Supply Networks
Transport
Czech RepublicPPP Taskforce 2004Legal framework under preparationWater Supply NetworksTransportMilitary CampsHealthEducation
CroatiaTransportWater Supply Networks
RomaniaTransportHealthWater Supply Networks
HungaryPPP Committee 2003New Procurement Act 2004TransportPrisonsHealthEducationWater Supply Networks
SlovakiaWater Supply NetworksTransport
Building facilities
Court HallsPrefectural/Municipal HallsRelocation servicesSocial welfare centresManagement of real estate
property
Environment
Solid & liquid wastemanagement
Provision of watersupply irrigationservices
Management of energysources
Entertainment
Tourist facilitiesTheme parksMallsRecreation areasExhibition areasSports facilities
7/28/2019 Privatisation and Regulation of Business
24/24
Source : Grand Thornton Presentation (Athens 2005)
Source : Grand Thornton Presentation (Athens 2005)
Education/Training
Students residencehalls
University campusesSchools
Health
HospitalsHealth CentresClinicsPatient Treatment
Units
TransportMotorwaysTramway, Underground
rail (Metro), airportsPorts, marinasNational trunk roadsRoad network in cities
Parking
Security
PrisonsTherapeutic
CommunitiesPolice StationsFire Brigade Centres
Defense
Accommodation, officesConstruction of auxiliary
facilitiesTraining Centres
Technology
IT Services andSystems forSchools,Universities,Ministries,Public Services
top related