Transcript
8/19/2019 Presentation Nanotubes
1/9
8/19/2019 Presentation Nanotubes
2/9
Outline! Concept of composite and laminate
! Mechnical properties
! Conclusion: Benefits of it use
8/19/2019 Presentation Nanotubes
3/9
What is a composite?A composite material is a material made from two or moreconstituent materials that remain separated in the final structure.
The new material may be preferred for many reasons: materials
which are stronger, lighter, or less expensive when compared totraditional materials .
8/19/2019 Presentation Nanotubes
4/9
LaminatesA laminate is a assembly of pliesof reinforced polymer. Each ply isformed by a polymer acting asmatrix and a fiber acting asreinforcement. The polymer in thematrix can be termoplastic ortermoset, and there are a lot ofdifferent type of fiber, depending
of the material on which aremade.
8/19/2019 Presentation Nanotubes
5/9
Mechanical Properties
8/19/2019 Presentation Nanotubes
6/9
! Elastic ModulusExpoxy and carbon fiber laminate: 200 – 650 GpaAluminium: 70 Gpa
! Tensile StrengthExpoxy and carbon fiber laminate: 2 – 7 GpaAluminium: 200 Mpa
Laminate VS Aluminium
8/19/2019 Presentation Nanotubes
7/9
! Bad impact strength
! Interlaminar crack
! With a small impact, the tensile strength decreases around afifty percent
Impact Strength
8/19/2019 Presentation Nanotubes
8/9
! Aluminium:2,7 Kg.m -3
! Titanium: * Laminate:4,5 kg.m -3 1,5 – 2 Kg.m -3
! Steel:7,8 kg.m -3
Density
8/19/2019 Presentation Nanotubes
9/9
! Mechanical properties far superior that Aluminium
! Bad impact strength
! Low density ! High mechanical properties per weight
Conclusion
top related