POWER TAKE-OFF DRIVELINE PRODUCTS CATALOG · POWER TAKE-OFF DRIVELINE PRODUCTS CATALOG Welcome to Neapco Power Take-Off (P.T.O.) Driveline Products Catalog. The goal of this publication
Post on 16-Apr-2020
20 Views
Preview:
Transcript
POWER TAKE-OFF DRIVELINE PRODUCTS CATALOG
Welcome to Neapco Power Take-Off (P.T.O.) Driveline Products Catalog. The goal ofthis publication is to provide trouble free identification of a sometimes complex and/orunfamiliar product line. In this issue there are improvements in the series information,a major consolidation of Category I series, and an entirely new Auxiliary P.T.O. section.Our plan is to expand the coverage of this catalog in future issues while continuing toimprove the content from a user’s perspective.
There are five (5) major areas of interest (sections) in this book.
GENERAL INFORMATION – Contains important introductory information including“How To Use This Catalog”, identification, maintenance, lubrication details and more.
STANDARD SERIES – Features domestic (primarily North American) design Agricul-tural P.T.O. driveline products dimensioned in inches.
METRIC SERIES – Covers both Tri-lobe and Lemon-shape European-style AgriculturalP.T.O. driveline products with metric dimensions.
AUXILIARY P.T.O. – Focused products for truck mounted and industrial power take offapplications with Neapco’s exclusive Safety Shielding System.
INTERCHANGE – Part number interchange to key competitor product lines for easyreference.
TECHNICAL SUPPORT
Neapco understands that accurate catalogs and quality products are only pieces of acomplete program. We provide full line technical support on all of our product lines.Call 800-821-2374 to talk to a Customer Service Representative with questions oncatalog information or a Technical Support Specialist with in-depth product knowledgeregarding application problems.
THE DRIVELINE COMPANY . . . FOUNDED 1921Toll Free 800-821-2374 U.S. & Canada
4
3
2
1
0
(¹⁵⁄₁₆") 1-0170
1-1475 (³¹⁄₃₂")
(1") 1-1875
1-1275 (1¹⁄₁₆")
(1¹⁄₈") 1-2075
2-2275 (1¹⁄₄")
(1⁵⁄₁₆") 3-0044
3-0188 (1³⁄₈")
(1¹⁷⁄₃₂") 3-0045
(³⁵⁄₆₄")1-1475, 1-0170
(³⁷⁄₆₄")1-1875
(⁴¹⁄₆₄")1-1275
(1¹⁄₆₄")3-0045
(⁵⁷⁄₆₄")3-0188
(²³⁄₃₂")1-2075
(²⁷⁄₃₂")2-22753-0044
(4¹⁄₆₄") 3-0045(3⁷⁄₈") 3-0188
(3³⁄₄") 3-0044
(2¹⁵⁄₁₆") 2-2275(2⁷⁄₈") 1-1875
(2¹³⁄₃₂") 1-2075
(2⁵⁄₁₆")1-1275
(2¹⁄₁₆")1-0170
(1³¹⁄₃₂")1-1475
J.L. (JOURNAL LENGTH WITH BEARINGS REMOVED) B.D. (BEARING DIAMETER)
J.D. (JOURNAL DIAMETER)
TABLE OF CONTENTSWarranty . . . . . . . . . . 1How to Read Catalog . . . . . . . 2-3Selection of Proper Series. . . . . . 3Identification of Series L600-N1000 . . . 3Driveshaft Safety Information . . . . . 4-5Maintenance and Lubrication Instructions . 6Competitor Interchangeability Chart . . . 7-8
Standard Series. . . . . . . . 7Metric Series . . . . . . . . 8
Cross and Bearing Kit Specification:Standard and Metric . . . . . . 9
Standard Series Listings . . . . . 10-59AG Rack . . . . . . . . 10-11L600 Series . . . . . . . 12-16N1000 Series . . . . . . . 17-241200 Series . . . . . . . 25-311800 Series . . . . . . . 32-362000 Series . . . . . . . 37-412200 Series . . . . . . . 42-48
2200 Series CV . . . . . 47-48N44 Series . . . . . . . 49-53
N44 Series CV . . . . . 52-532600 Series . . . . . . . 54-56N55 Series . . . . . . . 57-59
World ShieldTM / Shield Bearing Kits . . . 60Q.D. Repair Kits . . . . . . . . 61
Old Style Replacement Shield Components . 61Hanger Bearings, Pillow Block Bearings
and Set Screws . . . . . . . 62Square, Step and Woodruff Keys . . . . 63Shafting and Tubing . . . . . . .64-65Metric Series Listings . . . . . . 66-96
Metric AG Rack . . . . . . . 66-671 Series (Bondioli & Pavesi) . . . 68-692 Series (Bondioli & Pavesi) . . . 70-713 Series (Bondioli & Pavesi) . . . 72-734 Series (Bondioli & Pavesi) . . . 74-755 Series (Bondioli & Pavesi) . . . 76-776 Series (Bondioli & Pavesi) . . . 78-797 Series (Bondioli & Pavesi) . . . 80-818 Series (Bondioli & Pavesi) . . . 82-839 Series (Bondioli & Pavesi) . . . . 8410 Series (Bondioli & Pavesi) . . . . 842100 Series (Walterscheid) . . . 85-862200 Series (Walterscheid) . . . 87-881 Series (Walterscheid) . . . 89-902300 Series (Walterscheid) . . . 91-922400 Series (Walterscheid) . . . 93-942500 Series (Walterscheid) . . . 95-96
Auxiliary PTO Driveshafts & Components 97-127Companion Flanges . . . . . . 121-122Interchange . . . . . . . . 128-138
WarrantyWe warrant to the original purchaser all new parts to be free of defects in material and workmanship whensuch parts are used on applications which have been approved by our Engineering Department, but notagainst damage caused by negligence or abuse.Our obligations and liabilities under this Warranty shall be limited to replacing or repairing such parts if foundupon inspection by us to be defective.OUR WARRANTIES ARE STRICTLY LIMITED TO THOSE JUST STATED. WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ALL IMPLIED WARRANTIESARISING FROM A COURSE OF DEALING, USAGE OR TRADE, BY STATUE OR OTHERWISE AREHEREBY DISCLAIMED, and in the event of breach of any warranty or any legal action brought by buyer basedon alleged negligence or other tortious conduct of us, buyer's sole and exclusive remedy will be replacementof defective material as stated above. WE WILL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIALOR CONTINGENT DAMAGES OF ANY KIND. We make no warranty whatsoever with respect to componentparts or accessories not supplied by us.
1
Copyright ©2001 Neapco, Inc.Pottstown, Pennsylvania
All rights reserved. No part of this book may be reproduced in any form without specific writtenpermission from the copyright owner. Manufactured in The United States of America.
HOW TO READ THIS CATALOG
HOW TO READ THIS CATALOG
BY SERIES—Locate the replacement component
Each yoke and/or component lists the appropriate dimensionalinformation needed to match your replacement component tothe appropriate part number.
1st KNOW YOUR SERIES
Neapco offers several methods to identify the series of thereplacement component; use this information to identify theNeapco series:
1.) Interchange by competitor part number (Pages 128-138)2.) Dimensional check (Page 9)3.) Size comparison templates for standard series only
(Inside Back cover)
Shield systems are available and their use is required for eachseries. C.V. joints, clutches, and other special add-oncomponents are located in each available series. Serviceparts for shields, Q.D. yokes, and other hardware are locatedin the back of the catalog. (See Table of Contents.)
2
ABBREVIATIONSMax. MaximumMin. Minimummm MillimetersMP Male PilotN/A Not AvailableNo. NumberNPT National Pipe TapO.D. Outside Diameterpc. PiecePTO Power Take-OffQ.D. Quick DisconnectRD RoundRECT RectangularRPM Revolutions per minuteSPL SplineSQ Square
ASAE American Society of Agricultural Engineers
BC Bolt CircleBrg. BearingL CenterlineC.V. Constant VelocityD.T. Drill ThruDBL DoubleDia. DiameterDim. DimensionDist. DistanceGA GaugeHEX HexagonHP HorsepowerI.D. Inside Diameterin. InchesLoc. Location
Set Screw or Pin HoleKeyway Distance Part
Bore Length Width Location Hole Size Location to End Number
⁵⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ⁵⁄₈" 10-4373
³⁄₄" 1¹¹⁄₁₆" ³⁄₁₆" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-4693
c
HOW TO READ THIS CATALOG
HOW TO READ THIS CATALOG
In order to select the correct series PTO universal joint to satisfy your needs, you needonly answer three (3) simple questions.
1. What size is the yoke? Measure thesize of the hole in the ear section, anddetermine the lock-up type.
2. What are the bore and keyway sizes? Keyway locations? What typeof bore: square, rectangular, spline?
3. What is the length of the yoke?
Identification of Series
L600-N1000There are three major Category 1 PTO series: Neapco, Rockwell, and Dana/Spicer.We have a complete range of components for the L6 and 1000 series. Our yokeshave identification chamfers and marks in the critical fit dimension areas. Use theproper universal joint kit for the respective series.
Round Spline Square Hexagon
OutsideLockup
Ear Hole
InsideLockup
Ear Hole
Outside Lockup Inside Lockup
L
1.45
BroachedGoove
L600 N1000
.969
1.50
.937
Notch
3
DangerRotating Driveline
Applicable safety standards require awarning label be affixed to the outer sectionof the driveline safety shield, to remind theoperator that it should not be in operationuntil the following conditions have beenmet.
1. All Driveline, Tractor and EquipmentShields are in place
2. The Driveline is properly and securelyattached at both ends.
3. The Driveline Shields turn freely. Anydeviation from this standard could resultin a serious injury or death.
The label, part number NA-7232, shouldbe affixed to the outer shield with the topone (1") inch from the bell as shown in thediagram below.
Note: Applicable safety standardsrequire that all drivelines beshielded with legible label in place.When maintaining and repairingPTO drivelines, use thedesignated label part numbers topurchase replacements.
SAFETY INFORMATION
SAFETY INFORMATION
READ CAREFULLY and ADHERE TO
Part NumberNA-7232
Unguarded portion ofPTO must be shieldedby tractor mastershield.
Unguarded portion ofPTO must be shieldedby implement shieldfurnished by equip-ment manufacturer.
4
DangerGuard Missing
DO NOT OPERATEApplicable safety standards require theuse of warning labels on the driveshaftwhen the safety shields have beenremoved. We recommend that label partnumber NA-10666 be adhered to the tubeend of the driveshaft, one (1") inch fromthe edge of the yoke, with the side of thelabel toward the yoke. (See diagrambelow) At this point, the label will bereadily visible at all times.
Serious injury or even death can result byoperating equipment without the propersafety shield in place. DO NOT operateyour equipment without safety shieldsbeing installed on the driveshaft.
Note: A high percentage of alldriveline injuries occur when safetyshielding is missing or notfunctional. It is necessary for theuser to maintain proper shieldingand safety labels on the drivelines.
SAFETY INFORMATION
SAFETY INFORMATION
READ CAREFULLY and ADHERE TO
Part NumberNA-10666
5
6
Lubricants for Universal Joints and Slip SleevesUse only a good quality lithium soap base E.P. grease meeting or exceeding N.L.G.I. grade 2 specifications. Thissame grease may also be used for shield bearing grooves and Q.D. pin lubrication.
*MaintenanceAfter prolonged periods of disuse such as off-season storage, inspect as follows.
1. Shielding for damage and freedom of rotation2. Legibility of shield warning decal3. Lubrication:
Carefully adhere to applicable lubrication instructions4. PTO end connections:
Check that both the tractor and implement end connections have been made properly and are securelylocked
5. Safety Precautions:Use only shielded drivelines and make sure tractor master shield and implement PTO shield are in placeand cover driveline end connections.
6. Insure shaft and shield labels are in place. (Refer to pages 4 and 5 for proper location)
*It is recommended that this inspection be performed before each use of machine.
Shield Bearing Shield Bearing
Q.D. Pins & Collars
Cross andBearing Kit
Cross andBearing Kit
Minimum Recommended Lubrication Schedule
20 hrs.
40 hrs.
8 hrs.
40 hrs.
8 hrs.
40 hrs.
Sleeve
Maintenance and LubricationInstructions for PTO Driveline
7
SupplierASAE HP @ HP @ Walterscheid
540 RPM 1000 RPM Neapco AgMaster G & G Rockwell Weasler
Standard Series
Series N1000 1000Kit No. 1-0170 5-170X
Series L600 6N L6N 6Kit No. 1-1475 302-0600 CPL6R-40 200-0600
Series 1200 1140 12N L12N 12Kit No. 1-1275 5-242X 302-1200 CPL12R 200-1200
Series 1800 1800Kit No. 1-1875 200-1875
Series 2000 1240 14N L14N 14Kit No. 1-2075 5-129X 302-1400 CPL14R 200-1400
Series 2200 1340 35N 35N 35Kit No. 2-2275 5-243X 302-3500 CP35R 200-3500
Series N44 44R 44R 44Kit No. 3-0044 302-4400 CP44R 200-4400
Series 2600 1480 2600Kit No. 3-0188 5-188x 200-2600
Series N55 5N 55N 55Kit No. 3-0045 302-5500 CP55N 200-5500
1 16 30
1 16 30
2 25 48
3 35 48
3 35 56
4 58 93
5 80 120
6 100 150
6 100 150
SupplierASAE Walterscheid
Category Number Neapco Precision Rockwell Spicer AgMaster Weasler1 Series N1000 1500/1700 10N 1000 1000
1 Series L600 1900 L6N 6
2 Series 1200 1200 L12N 1140 1140 12
3 Series 1800 1800
3 Series 2000 1300 L14N 1240 1240 14
4 Series 2200 1800 L16S/3N/35N 1340 1340 35
5 Series N44 1400 44R 1440 1440 44
6 Series 2600 1480 1480 2600
6 Series N55 1100 55N 55
IMPORTANT NOTICE
The data listed above is correct to the best of our knowledge, having beencompiled from sources of information which we believe to be reliable.However, we cannot assume any responsibility for possible error.
COMPETITOR INTERCHANGEABILITY CHART
8
Metric SeriesASAE Supplier
Category Number Neapco Bondioli & Pavesi Walterscheid Weasler
IMPORTANT NOTICE
The data listed above is correct to the best of our knowledge, having beencompiled from sources of information which we believe to be reliable.However, we cannot assume any responsibility for possible error.
1
1
2
2
3
3
3
3
4
4
5
5
5
6
Series 1 1Kit No. 1-0121 1.41 200-6154
Series 2100 2100Kit No. 1-1001 10.01.00 200-7155
Series 2 2Kit No. 1-0221 2.41 200-8261
Series 2200 2200Kit No. 1-0221 20.00.00 200-8261
Series 3 3Kit No. 1-0321 3.41 200-8370
Series I IKit No. 1-0321 11.03.00 200-8370
Series 2300 2300Kit No. 1-0421 21.00.00 200-8474
Series 4 4Kit No. 1-0421 4.41 200-8474
Series 5 5Kit No. 2-0521 5.41 200-6580
Series 2400 2400Kit No. 2-2421 35.00.00 200-7676
Series 6 6Kit No. 3-0621 6.41 200-8692
Series 2500 2500Kit No. 3-2521 36.00.00 200-7989
Series 7 7Kit No. 3-0721 7.81 200-6794
Series 8 8Kit No. 3-0821 8.41 200-6806
Series 9 9Kit No. 3-0921 9.81
Series 10 10Kit No. 3-1021 10.41
COMPETITOR INTERCHANGEABILITY CHART
9
Standard SeriesBearing Lock-Up Overall Journal Journal Neapco Page PartDiameter Dimension Length Length Diameter Type Series Number Number
³¹⁄₃₂" 1²⁹⁄₆₄" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 L600 12 1-0616
³¹⁄₃₂" 1²⁹⁄₆₄" 2⁵⁄₁₆" 1³¹⁄₃₂" ³⁵⁄₆₄" 1 L600 12 1-1475
¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 N1000 17 1-0170
¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 N1000 17 1-0171
¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 2¹⁄₁₆" ³⁵⁄₆₄" 1 N1000 17 1-0172
1¹⁄₁₆" 1¹³⁄₁₆" 2⁹⁄₁₆" 2⁵⁄₁₆" ⁴¹⁄₆₄" 1 1200 25 1-1275
1" 2¹¹⁄₃₂" 3¹⁄₈" 2⁷⁄₈" ³⁷⁄₆₄" 1 1800 32 1-1875
1¹⁄₈" 2⁵⁄₈" 2⁵⁄₈" 2¹³⁄₃₂" ²³⁄₃₂" 2 2000 37 1-2075
1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2¹⁵⁄₁₆" ²⁷⁄₃₂" 2 2200 42 2-2275
1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2¹⁵⁄₁₆" ²⁷⁄₃₂" 2 2200 42 2-2276
1⁵⁄₁₆" 2⁵¹⁄₆₄" 4¹⁄₃₂" 3³⁄₄" ²⁷⁄₃₂" 1 44 49 3-0044
1³⁄₈" 4³⁄₁₆" 4³⁄₁₆" 3⁷⁄₈" ⁵⁷⁄₆₄" 2 2600 54 3-0188
1¹⁷⁄₃₂" 4⁵⁄₁₆" 4⁵⁄₁₆" 4¹⁄₆₄" 1¹⁄₆₄" 2 55 57 3-0045
Metric Series: All Type 2
22.0(.866) 54.0(2.126) Bondioli & Pavesi 1 68 1-0121
22.0(.866) 55.0(2.165) Walterscheid 2100 85 1-1001
23.8(.937) 61.3(2.413) 1-0221
27.0(1.063) 70.0(2.756) 1-0321
27.0(1.063) 74.6(2.937) 1-0421
30.2(1.188) 80.0(3.150) Bondioli & Pavesi 5 76 2-0521
32.0(1.260) 76.0(2.992) Walterscheid 2400 93 2-2421
30.2(1.188) 92.0(3.622) Bondioli & Pavesi 6 78 3-0621
36.0(1.417) 89.0(3.500) Walterscheid 2500 95 3-2521
35.0(1.377) 94.0(3.700) Bondioli & Pavesi 7 80 3-0721
35.0(1.377) 106.5(4.193) Bondioli & Pavesi 8 82 3-0821
41.0(1.614) 108.0(4.250) Bondioli & Pavesi 9 84 3-0921
41.0(1.614) 118.0(4.646) Bondioli & Pavesi 10 84 3-1021
{{{
OverallLength
Brg.Dia.
JournalLength
JournalDia.
Bearing OverallDiameter Length Page Partmm(in.) mm(in.) Style Series Number Number
}}}
✝ Non-Greasable. ✝✝ Greasable thru one (1) bearing. � Greasable thru two (2) bearings.
Type 1(Snap Ring Grooves
in Bearings)
Type 2(Snap Ring Grooves
in Yokes)
Bondioli & Pavesi 2 70Walterscheid 2200 87
Bondioli & Pavesi 3 72Walterscheid I 89
Bondioli & Pavesi 4 74Walterscheid 2300 91
✝
✝✝
�
CROSS AND BEARING KITS
10
Series Quantity Part Number
Cross & Bearing Kits
L600 6 1-14751200 8 1-12752000 8 1-20752200 8 2-2275
Quick Disconnect Yokes
L600 6 Spline 4 16-6409-ARL600 21 Spline 1 16-0621-AR1200 6 Spline 4 12-1190-AR1200 21 Spline 1 12-1193-AR2000 6 Spline 4 20-9309-AR2000 21 Spline 2 20-9325-AR2200 6 Spline 3 22-2312-AR2200 21 Spline 1 22-2317-AR
Series Description Quantity Part Number
STANDARD AG RACKFor additional shaft and shield safetylabels, please refer to pages 4 and 5.
Shield Safety labelPart Number NA-7232
Shaft Safety labelPart Number NA-10666
Services Popular Traditional North American Drivelines
11
Series Description Quantity Part Number
Series Description Quantity Part Number
Retrofit Shield Kits(Includes Shield Bearings)
L600 1 69-0640-AR1200, 2000 1 69-1240-AR2200 1 69-2240-AR
1³⁄₁₆" Shaft 1 73-1188³⁄₄" X ⁷⁄₈" Shaft 2 73-0750
1" X 1 ¹⁄₈" Shaft 2 73-10011" X 1¹⁄₈" Tube 2 70-1001
1¹⁄₄" X 1³⁄₈" Tube 2 70-12502" X 14GA(.083) Tube 1 70-2000
2¹⁄₈" X 11GA(.120) Tube 1 70-2125
PTO Series Identifier 1 99-0001-AR
Shaft & Tube Selection - 72" lengths(Included with Full Assortment Only)
Shaft Weld Yokes
L600 2 16-6129-AR1200 2 12-1340-AR2000 2 20-9126-AR2200 1 22-1344-AR
L600 2 16-6131-AR1200 2 12-1318-AR2000 2 20-9131-AR2200 1 22-1325-AR
Tube Weld Yokes
Sleeves2000 1 53-2034-AR2200 1 53-2435-AR
Half ShaftsL600 Yoke & Shaft 1 65-1639-ARL600 Yoke & Tube 1 64-1639-AR1200 Yoke & Shaft 1 65-2839-AR1200 Yoke & Tube 1 64-2739-AR2000 Yoke & Shaft 1 65-2840-AR2000 Yoke, Tube & Sleeve 1 64-2740-AR2200 Yoke & Shaft 1 65-2639-AR2200 Yoke, Tube & Sleeve 1 64-2539-AR
L600 ³⁄₄" Rd. Bore 1 16-6111-ARL600 ⁷⁄₈" Rd. Bore 1 16-6213-ARL600 ¹⁵⁄₁₆" Rd. Bore 1 16-6114-ARL600 1" Rd. Bore 4 16-6215-ARL600 1¹⁄₈" Rd. Bore 1 16-6216-ARL600 1¹⁄₄" Rd. Bore 2 16-6218-AR1200 1" Rd. Bore 4 12-1115-AR1200 1¹⁄₈" Rd. Bore 2 12-1326-AR1200 1¹⁄₄" Rd. Bore 2 12-1176-AR1200 1³⁄₈" Rd. Bore 1 12-1120-AR2000 1" Rd. Bore 1 20-9115-AR2000 1¹⁄₈" Rd. Bore 2 20-9117-AR2000 1¹⁄₄" Rd. Bore 2 20-9119-AR2000 1³⁄₈" Rd. Bore 2 20-9120-AR2200 1¹⁄₈" Rd. Bore 1 22-1132-AR2200 1¹⁄₄" Rd. Bore 2 22-1218-AR2200 1³⁄₈" Rd. Bore 2 22-1219-AR2200 1⁷⁄₁₆" Rd. Bore 1 22-1178-AR2200 1¹⁄₂" Rd. Bore 2 22-1120-AR
End Yokes
AG Rack (Full Assortment) 99-0192AG Rack (Limited Assortment) 99-0191AG Rack and Hardware Only 99-0190
Complete Displays
STANDARD AG RACKServices Popular Traditional North American Drivelines
12
L600 SERIESReplaces Rockwell® L6 Series - Replaces Weasler® 6 Series
Lock-Up OverallBearing Dia. Dim. Length Part Number
³¹⁄₃₂" 1²⁹⁄₆₄" 2⁵⁄₁₆" 1-1475
2⁵⁄₁₆" 1-0616*
*Conversion Kit: 1000 to L600
Cross and Bearing Kit: Inside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 16-6409
1³⁄₈"-21 SPL 3⁹⁄₁₆" 56-1857 16-0621
Note: Tractor end use only
Lawn and Garden YokeSlide Collar Q.D.
(L) Collar Repair KitBore Length Part Number Part Number
1"-15 SPL 2¹³⁄₁₆" 56-0615 16-0615
¹⁵⁄₁₆" 1³¹⁄₆₄"³¹⁄₃₂" 1²⁹⁄₆₄"
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹⁄₁₆" 56-3001 16-0606
1²⁹⁄₆₄" 2⁵⁄₁₆"
³¹⁄₃₂"
L
L
L
w
�
ASAECategory 1
13
(L)Stub Length Part Number
Lawn and Garden YokeStub Yoke
L
⁵⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6210
³⁄₄" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6111
¹³⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6112
⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6213
¹⁵⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6114
1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6215
1¹⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6216
1³⁄₁₆" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6217
1¹⁄₄" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 16-6218
Round
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Round-Double Keyway
⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6213
1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6215
1¹⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6216
1³⁄₁₆" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6217
1¹⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6218
³⁄₁₆" GAP¹⁄₄" GAP
³⁄₁₆" GAP¹⁄₄" GAP
¹⁄₄" GAP⁵⁄₁₆" GAP
¹⁄₄" GAP⁵⁄₁₆" GAP
¹⁄₄" GAP⁵⁄₁₆" GAP
L
L
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1"-15 SPL 5³⁄₈" 16-1615
Implement YokesPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 16-6407
Note: Implement end use onlyL
L600 SERIESReplaces Rockwell® L6 Series - Replaces Weasler® 6 Series
14
L600 SERIESImplement Yokes
1" RD 2³⁄₄" ¹³⁄₃₂" ⁷⁄₁₆" 16-6616*
*Also has ¹⁄₄" keyway and set screw hole
Clamp(L) Drill Thru
Bore Length Hole Size Bolt Fit Part Number
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1" 2¹⁄₂" ²⁵⁄₆₄" GAP ⁵⁄₈" 16-6516
1¹⁄₈" 2¹⁄₂" ²⁵⁄₆₄" GAP ⁵⁄₈" 16-6518
1¹⁄₄" 2¹⁄₂" ²⁵⁄₆₄" GAP ⁵⁄₈" 16-6165
Shear
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" EAR ⁵⁄₈" 16-6134
1³⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" EAR ³⁄₈" 16-6187
Spline
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
³⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6171
⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6302
⁷⁄₈" X 1"* 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6302
1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6302
1¹⁄₈" 2¹⁄₂" — — — 16-6138
1¹⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 16-6127
*Double Square
Square
L
L
L
L
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 GAP ⁵⁄₈" 16-6303
Hexagon
L
Replaces Rockwell® L6 Series - Replaces Weasler® 6 Series
15
L600 SERIES
SquareSet Screw
(L) DistanceBore Length Hole Size Loc. to End Part Number
³⁄₄" 5¹⁄₂" ¹⁄₈" NPT GAP 2" 16-6176
⁷⁄₈" 5¹⁄₂" (2)¹⁄₈" NPT GAP 2" 16-6178
Implement Slip Yokes
Double Pivot Yoke(L) Maximum
L to L Static Angle Operating Angle Part Number
2¹⁄₂" 20O 18O 16-8600
c c
L
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number³⁄₄" X ⁷⁄₈" 2¹⁄₂" 73-0750 16-7600*
³⁄₄" X ⁷⁄₈" 2¹⁄₂" 73-0750 16-6129**
Shield Brg. Groove Style: *0600 **L600L
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number1" X 1¹⁄₈" 2³⁄₄" 70-1001 1 X 1¹⁄₈" 16-3600*
1" X 1¹⁄₈" 2³⁄₄" 70-1001 1" X 1¹⁄₈" 16-6131**
1³⁄₁₆" RD 3" 70-1625 1⁵⁄₈" X 16GA 16-6132*
Shield Brg. Groove Style: *0600 **L600
L
Rectangular and Round Tube(L) Wall Use W/Weld
O.D. Length Thickness Yoke Number Part Number
1" X 1¹⁄₈" 72" .125 16-3600 70-1001
1" X 1¹⁄₈" 72" .125 16-6131 70-1001
1⁵⁄₈" RD 72" .065 (16GA) 16-6132 70-1625
L
Replaces Rockwell® L6 Series - Replaces Weasler® 6 Series
16
L600 SERIES
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Slip Sleeve
³⁄₄" X ⁷⁄₈" 4" NO 1⁵⁄₈" X .065(16GA) — 53-0635
³⁄₄" X ⁷⁄₈" 4" NO 1¹⁄₂" X .065(16GA) — 53-0635
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 24" 65-1627
48" 36" 65-1639
60" 48" 65-1651
Yoke and Tube AssemblyOverall Driveline (L)
Length L to End Part Number
36" 24" 64-1627
48" 36" 64-1639
60" 48" 64-1651
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number60" 51" 5¹⁄₄" 69-0648
Shield Bearings are not included. Please order part number 56-1600Note: Shield can be cut shorter to fit 36" and 48" drives.
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 26³⁄₄" 38" 58-1627
48" 38³⁄₄" 62" 58-1639
60" 50³⁄₄" 86" 58-1651
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
1¹³⁄₁₆" ⁵⁄₁₆" 69-0648 56-1600
Note: Two (2) Bearings per box
L
L
L
L
L
c c c c
c
Replaces Rockwell® L6 Series - Replaces Weasler® 6 Series
17
N1000 SERIES
¹⁵⁄₁₆"
1¹⁄₂" 2⁵⁄₁₆"
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹⁄₁₆" 56-3001 10-5430
Lawn and Garden YokeSlide Collar Q.D.
(L) Collar Repair KitBore Length Part Number Part Number
1"-15 SPL 2¹³⁄₁₆" 56-0615 10-5366
L
L
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 10-4139
1³⁄₈"-21 SPL 3⁹⁄₁₆" 56-1857 10-5411
Note: Tractor end use only
L
Stub Yoke
L
1"-15 SPL 5³⁄₈" 10-0615
(L)Stub Length Part Number
Lock-Up OverallBearing Dia. Dim. Length Part Number
¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 1-0170
¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 1-0172*
¹⁵⁄₁₆" 1¹⁄₂" 2⁵⁄₁₆" 1-0171**
*Non-Greaseable **Greaseable thru 1 Bearing
Cross and Bearing Kit: Inside Lock-Up
Replaces Neapco 0600 Series - Interchangeble with Spicer® 1000 Series
ASAECategory 1
18
Implement YokesPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 3⁹⁄₁₆" 56-1857 10-4137
1³⁄₈"-21 SPL 3⁹⁄₁₆" 56-1857 10-5412
Note: Implement end use only
L
N1000 SERIES
Set Screw or Drill Thru(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
⁵⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4373
³⁄₄" 1¹¹⁄₁₆" ³⁄₁₆" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-4693
³⁄₄" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-0413
³⁄₄" 2¹⁄₂" ³⁄₁₆" GAP (2)³⁄₈"-16 EAR ¹⁄₂" 10-4133
³⁄₄" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-0423
¹³⁄₁₆" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0433
¹³⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0443
¹³⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4173
⁷⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4943
⁷⁄₈" 1¹¹⁄₁₆" ¹⁄₄" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-1703
⁷⁄₈" 1¹¹⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₁₆" 10-4703
⁷⁄₈" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0453
⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-5113
⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-0463
⁷⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-4453
¹⁵⁄₁₆" 2¹⁄₄" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-0473
1" 1¹¹⁄₁₆" ¹⁄₄" GAP ³⁄₈"-16 EAR ⁷⁄₁₆" 10-1705
1" 2¹⁄₂" ³⁄₁₆" GAP ³⁄₈"-16 GAP ⁵⁄₈" 10-0483
1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4573
1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-0493
1" 2¹⁄₂" — — ³⁄₈" DT EAR ¹⁄₂" 10-4443
1" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4493
1¹⁄₁₆" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4163
1¹⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4473
1¹⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4143
1¹⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-4113
1¹⁄₈" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 GAP ²⁹⁄₆₄" 10-4103
1³⁄₁₆" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4153
1¹⁄₄" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4193
Round
L
Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
19
Implement Yokes
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Round-Double Keyway
¹³⁄₁₆" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5313
⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5213
1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5215
1¹⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5216
1³⁄₁₆" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-1574
1¹⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-5218
³⁄₁₆" GAP¹⁄₄" GAP
³⁄₁₆" GAP¹⁄₄" GAP
³⁄₁₆" GAP¹⁄₄" GAP
¹⁄₄" GAP⁵⁄₁₆" GAP
¹⁄₄" GAP⁵⁄₁₆" GAP
¹⁄₄" GAP⁵⁄₁₆" GAP
L
N1000 SERIES
⁴⁷⁄₆₄"-16 SPL 2¹⁄₄" ¹⁵⁄₃₂" ⁷⁄₁₆" 10-4611
⁴⁷⁄₆₄"-16 SPL 2³⁄₄" ²⁹⁄₆₄" ⁷⁄₁₆" 10-5352
1" RD 2³⁄₄" ¹⁵⁄₃₂" ⁷⁄₁₆" 10-5322*
*Also has ¹⁄₄" keyway and set screw hole
Clamp(L) Drill Thru
Bore Length Hole SIze Bolt Fit Part Number
L
EARGAP
Set Screw or Drill Thru(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1¹⁄₄" 2¹₂" ⁵⁄₁₆" GAP ³⁄₈"-16 GAP ¹⁄₂" 10-4123
1¹⁄₄" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 ¹⁄₂" 10-5156
1¹⁄₄" 2¹⁄₂" ¹⁄₄" GAP ³⁄₈"-16 EAR ¹⁄₂" 10-4183
1¹⁄₄" 2¹⁄₂" - - ³⁄₈"-D.T. EAR ⁵⁄₈" 10-4363
1³⁄₈" 2¹⁄₂" ⁵⁄₁₆" GAP ³⁄₈"-16 EAR ⁵⁄₈" 10-4293
Round
L
Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
20
N1000 SERIES
Hexagon
Implement Slip Yokes
L⁷⁄₈" 5¹⁄₂" GAP 1³⁄₄" 10-3162*
1¹⁄₈" 5¹⁄₂" GAP 1³⁄₄" 10-0332*
* Grease fitting assembled in yoke
Grease Fitting(L) Distance
Bore Length Loc. to End Part Number
Implement Yokes
Set Screw or Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
³⁄₄" 1¹¹⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₁₆" 10-5354
³⁄₄" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-0422
³⁄₄" 2¹⁄₂" ⁵⁄₁₆" D.T. GAP ¹⁄₂" 10-5149
⁷⁄₈" 1¹¹⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₁₆" 10-1707
⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-0412
⁷⁄₈" X 1"* 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-1580
1" 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-0452
1¹⁄₈" 2¹⁄₂" — — — 10-1557
*Double Square
Square
L
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
Hexagon
⁷⁄₈" 2¹⁄₂" ³⁄₈"-16 GAP ⁵⁄₈" 10-4282
1¹⁄₈" 2¹⁄₂" ³⁄₈"-16 GAP ¹⁄₂" 10-0432L
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
⁷⁄₈"-13 SPL 2¹⁄₂" ³⁄₈"-16 EAR ¹⁄₂" 10-4481
⁷⁄₈"-13 SPL 2¹⁄₂" — — — 10-4333
1"-6 SPL 2¹⁄₂" — — — 10-5158
1¹⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" D.T. EAR ¹⁄₂" 10-0411
1³⁄₈"-6 SPL 2¹⁄₂" ²¹⁄₆₄" D.T. EAR ³⁄₈" 10-0431
Spline
L
Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
21
N1000 SERIES
RoundGrease Fitting
(L) Keyway DistanceBore Length Width Loc. Loc. to End Part Number
L³⁄₄" 5¹⁄₂" ³⁄₁₆" GAP GAP 2" 10-0313*
¹³⁄₁₆" 5¹⁄₂" ¹⁄₄" GAP GAP 1³⁄₄" 10-0323*
⁷⁄₈" 5¹⁄₂" ¹⁄₄" GAP GAP 1³⁄₄" 10-0333*
¹⁵⁄₁₆" 5¹⁄₂" ¹⁄₄" GAP GAP 2" 10-3203*
1" 5¹⁄₂" ¹⁄₄" GAP GAP 1³⁄₄" 10-0383*
1¹⁄₈" 5¹⁄₂" ⁵⁄₁₆" GAP GAP 1³⁄₄" 10-3183*
1¹⁄₄" 5¹⁄₂" ⁵⁄₁₆" GAP GAP 1³⁄₄" 10-3163*
1¹⁄₄" 5¹⁄₂" ¹⁄₄" GAP GAP 2" 10-3173*
* Grease fitting assembled in yoke
Grease Fitting(L) Distance
Bore Length Loc. to End Part Number
Spline Slip
L1¹⁄₈"-10 SPL 5¹⁄₂" GAP 1³⁄₄" 10-0381*
1¹⁄₈"-10 SPL 5¹⁄₂" GAP 3¹⁄₂" 11-1075*
1¹⁄₈"-10 SPL 5¹⁄₂" GAP 3¹⁄₂" 10-5275*
1¹⁄₄"-6 SPL 5¹⁄₂" GAP 2" 10-1765*
* Grease fitting assembled in yoke
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
³⁄₄" X ⁷⁄₈" 5¹⁄₂" ¹⁄₈" NPT EAR 1" 10-1769
Rectangular
L
Implement Slip Yokes
SquareGrease Fitting
(L) DistanceBore Length Loc. to End Part Number
L³⁄₄" 5¹⁄₂" GAP 2" 10-1758*
³⁄₄" 5¹⁄₂" GAP 1³⁄₄" 10-0312*
⁷⁄₈" 5¹⁄₂" GAP 1³⁄₄" 10-0322*
1" 5¹⁄₂" GAP 1³⁄₄" 10-3122*
* Grease fitting assembled in yoke
Implement Yokes
Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
22
— 2" RD 3¹⁄₂" 2³⁄₄" BC* ¹¹⁄₃₂" 4 46-6900
2¹⁄₄" MP 1³⁹⁄₆₄" RD 3¹⁄₂" 2³⁄₄" BC* ¹¹⁄₃₂" 4 46-6902
— 1⁴³⁄₆₄" RD 3¹⁄₂" 2³⁄₄" ¹¹⁄₃₂" 4 10-1022
Flange Yokes(L) Flange Bolt Hole No. of Part
Bore Length Type Dia. Circle Dia. Holes Number
L* Uneven bolt hole spacing
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number1" X 1¹⁄₈" 2³⁄₄" 70-1001 1" X 1¹⁄₈" 10-5131
1³⁄₁₆" RD 3" 70-1625 1⁵⁄₈" X 16GA 10-5132
1¹⁄₄" RD 2¹⁄₂" — 1¹⁄₄" X 13GA 10-5174
— 2¹⁄₂" 70-2000 2" X 14GA 10-1005
L
N1000 SERIESDouble Pivot Yoke
(L) MaximumL to L Static Angle Operating Angle Part Number
1¹¹⁄₁₆" 7O 5O 10-5303
2¹⁄₂" 20O 18O 10-5361
3³⁄₁₆" 90O 45O 10-5331
c c
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number³⁄₄" X ⁷⁄₈" 2¹⁄₂" 73-0750 10-5129
L
Rectangular Shaft(L) Use W/Weld Yoke
Size Length Part Number Part Number³⁄₄" X ⁷⁄₈" 72" 10-5129 73-0750
L
Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
23
Rectangular and Round Tube(L) Wall Use W/Weld
O.D. Length Thickness Yoke Number Part Number1" X 1¹⁄₈" 72" .125 15-5131 70-1001
1⁵⁄₈" RD 72" .065(16GA) 15-5132 70-1625L
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Slip Sleeve
³⁄₄" X ⁷⁄₈" 4" NO 1⁵⁄₈" X .065(16GA) — 53-0634
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 24" 65-0627
48" 36" 65-0639
60" 48" 65-0651
Yoke and Tube AssemblyOverall Driveline (L)
Length L to End Part Number
36" 24" 64-0627
48" 36" 64-0639
60" 48" 64-0651
c
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 26³⁄₄" 38" 58-0627
48" 38³⁄₄" 62" 58-0639
60" 50³⁄₄" 86" 58-0651
L
L
L
L
c c c c
N1000 SERIESReplaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
24
N1000 SERIES
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
1¹⁄₂" ⁵⁄₁₆" 69-0648 56-0600
Note: Two (2) Bearings per box
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number
L
60" 51" 5¹⁄₄" 69-0648
Shield Bearings are not included. Please order part number 56-0600Note: Shields can be cut to fit 36" and 48" drives.
Replaces Neapco 0600 Series - Interchangeable with Spicer® 1000 Series
The products in this section of the Catalog were designed specifically for the Agricultural PowerTake-Off (PTO) and Lawn & Garden replacement market.
Please refer to pages 97-127 for Auxiliary PTO truck mounted and industrial applications
Notes
25
1200 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1¹⁄₁₆" 1¹³⁄₁₆" 2⁹⁄₁₆" 1-1275
Cross and Bearing Kit: Inside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹⁄₁₆" 56-1857 12-1190
1³⁄₈"-21 SPL 4¹⁄₁₆" 56-1857 12-1193
Note: Tractor end use only
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹⁄₂" 56-3001 12-2330
1³⁄₈"-21 SPL 4¹⁄₂" 56-3001 12-2321
1¹³⁄₁₆"
1¹⁄₁₆"
2⁹⁄₁₆"
L
L
Lawn and Garden YokeSlide Collar Q.D.
(L) Collar Repair KitBore Length Part Number Part Number
1"-15 SPL 3¹⁄₄" 56-0615 12-2300
L
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
ASAECategory 2
26
1200 SERIES
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹⁄₁₆" 56-1857 12-1300
1³⁄₈"-21 SPL 4¹⁄₁₆" 56-1857 12-1350
Note: Implement end use only
L
Implement YokesPin Type Q.D.
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
³⁄₄" 2³⁄₄" ³⁄₁₆" EAR ³⁄₈"-16 GAP ⁵⁄₈" 12-1312
¹³⁄₁₆" 3¹⁄₂" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1112
⁷⁄₈" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁵⁄₈" 12-1133
⁷⁄₈" 3¹⁄₂" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1113
¹⁵⁄₁₆" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁵⁄₈" 12-1134
1" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1135
1" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 EAR ⁵⁄₈" 12-1155
1" 3¹⁄₂" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1115
1¹⁄₈" 2³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1137
1¹⁄₈" 2³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 EAR ⁵⁄₈" 12-1162
1¹⁄₈" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1117
1¹⁄₈" 3¹⁄₂" ¹⁄₄" EAR (2)³⁄₈"-16 ⁷⁄₈" 12-1326
1³⁄₁₆" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1118
1¹⁄₄" 2³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1139
1¹⁄₄" 2³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 EAR ⁵⁄₈" 12-1169
1¹⁄₄" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1119
1¹⁄₄" 3¹⁄₂" ¹⁄₄" EAR (2)³⁄₈"-16 ⁵⁄₈" 12-1176
1³⁄₈" 3¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1120
1¹⁄₂" 2³⁄₄" ³⁄₈" GAP (2)³⁄₈"-16 ⁵⁄₈" 12-1175
Round
L
EARGAP
EARGAP
EARGAP
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
27
1200 SERIES
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1" X 1¹⁄₈" 3¹⁄₂" ²⁵⁄₆₄" GAP 1" 12-1197
Rectangular
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1" 3" ²¹⁄₆₄" EAR ⁵⁄₈" 12-1319
1¹⁄₈" 3¹⁄₂" ⁵⁄₁₆" GAP ⁵⁄₈" 12-1302
1¹⁄₄" 3" ²⁵⁄₆₄" EAR ⁵⁄₈" 12-1330
1³⁄₈" 3¹⁄₄" ¹⁷⁄₃₂" GAP ¹⁄₂" 12-1320
Shear
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈"-6 SPL 3¹⁄₂" ²¹⁄₆₄" GAP 1¹⁄₄" 12-1181
1³⁄₈"-6 SPL 3¹⁄₂" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 12-1172
1³⁄₈"-21 SPL 3¹⁄₂" — — — 12-1315
Spline
L
L
L
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1" 3¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1215
1¹⁄₈" 3¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1216
1¹⁄₄" 3¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 12-1218
³⁄₁₆"¹⁄₄"
¹⁄₄"⁵⁄₁₆"
¹⁄₄"⁵⁄₁₆"
L
Implement YokesRound-Double Keyway
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈" 2³⁄₄" ³⁄₈"-16 GAP ⁵⁄₈" 12-1168
1¹⁄₈" 3¹⁄₂" ³⁄₈"-16 GAP ⁷⁄₈" 12-1328
Hexagon
L
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
28
1200 SERIESImplement Yokes
Set Screw or Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
⁷⁄₈" 2³⁄₄" ³⁄₈"-16 EAR ⁵⁄₈" 12-1170
⁷⁄₈" X 1"* 3¹⁄₂" ³⁄₈"-16 EAR ⁷⁄₈" 12-1301
1" 2³⁄₄" ³⁄₈"-16 EAR ⁵⁄₈" 12-1159
1" 3¹⁄₂" ³⁄₈"-16 EAR ⁷⁄₈" 12-1163
1¹⁄₈" 3¹⁄₂" ²⁵⁄₆₄" D.T. GAP ⁵⁄₈" 12-1148
1¹⁄₄" 2³⁄₄" ¹¹⁄₃₂" D.T. GAP ⁵⁄₈" 12-1321
*Double Square
Square
HexagonSet Screw
(L) DistanceBore Length Hole Size Loc. to End Part Number
1¹⁄₈" 5¹⁄₄" ¹⁄₈" NPT GAP 1³⁄₄" 12-1173
Implement Slip Yokes
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1" 5¹⁄₄" ¹⁄₄" EAR ¹⁄₈" NPT EAR 1³⁄₄" 12-1316
1¹⁄₄" 5¹⁄₄" ⁵⁄₁₆" EAR ¹⁄₈" NPT EAR 1³⁄₄" 12-1174
Round
SplineSet Screw
(L) DistanceBore Length Hole Size Loc. to End Part Number
1¹⁄₄"-6 SPL 5¹⁄₄" ¹⁄₈" NPT GAP 1³⁄₄" 12-1171
1³⁄₈"-16 SPL 5¹⁄₄" ¹⁄₄"-28 GAP 3³⁄₈" 12-2322
SquareSet Screw
(L) DistanceBore Length Hole Size Loc. to End Part Number
1" 5¹⁄₄" ¹⁄₈" NPT GAP 1³⁄₄" 12-1314
L
L
L
L
L
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
29
1200 SERIESDouble Pivot Yoke
(L) MaximumL to L Static Angle Operating Angle Part Number
2³⁄₈" 10O 7O 12-1410
3³⁄₈" 37O 35O 12-1400
c c
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number1" X 1¹⁄₈" 2¹⁵⁄₁₆" 73-1001 12-1340
Rectangular Shaft(L) Use W/Weld Yoke
Bore Length Part Number Part Number1" X 1¹⁄₈" 72" 12-1340 73-1001
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number1⁹⁄₃₂" X 1¹³⁄₃₂" 2¹⁵⁄₁₆" 70-1250 1¹⁄₄" X 1³⁄₈" 12-1318
1¹⁄₂" RD 3³⁄₄" 70-2000 2" X .083(14GA) 12-1334
Rectangular and Round Tube(L) Wall Use W/Weld Yoke
O.D. Length Thickness Part Number Part Number
1¹⁄₄" X 1³⁄₈" 72" .125 12-1318 70-1250
2" 72" .083(14GA) 12-1334 70-2000
L
L
L
L
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Slip Sleeve
1" X 1¹⁄₈" 5" YES 2" X .083(14GA) 53-203456-229456-2295 L
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
30
1200 SERIES
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 24" 65-2827
48" 36" 65-2839
60" 48" 65-2851
Yoke and Tube AssemblyOverall Driveline (L)
Length L to End Part Number
36" 24" 64-2727
48" 36" 64-2739
60" 48" 64-2751
c
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number60" 51" 6¹⁄₈" 69-1248
Shield Bearings are not included. Please order part number 56-2000Note: Shield can be cut shorter to fit 36" and 48" drives.
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 27¹⁄₄" 38" 58-1227
48" 39¹⁄₄" 62" 58-1239
60" 51¹⁄₄" 86" 58-1251
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁄₁₆" ¹¹⁄₃₂" 69-1248 56-2000
Note: Two (2) Bearings per box
L
L
L
L
c c c c
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
31
1200 SERIES
Friction Clutch2 Plate
(L) Friction Disc RepairBore Length Flange O.D. Part Number Part Number
L
1³⁄₈"-6 SPL 5³⁄₄" 7¹⁄₈" 61-1200* 80-1202
* Two (2) per Box
Shear Bolt: Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number
1³⁄₈"-6 SPL 6³⁄₈" 56-3001 12-2506
1³⁄₈"-21 SPL 6³⁄₈" 56-3001 12-2521L
Unwelded Driveshaft(L)
Max. Length Part Number55¹⁄₄" 63-1254
67¹⁄₄" 63-1266
L
Note: The speed and length combination should not exceed the criticalspeed of the driveshaft.
Unwelded slip assemblies can be furnished in lengths up to the maximumshown in the table. One end of the driveshaft is supplied unwelded and maybe cut to the desired length by the customer.
Slip Yoke and Stub Assembly(L) (L)
Min. L to End Max. L to End Part Number
6¹⁄₄" 7³⁄₄" 51-2322
Yoke and Tube Assembly(L)
L to End Part Number
L
L
c c
48" 52-4600
60" 52-5800
c
Replaces Rockwell® L12N Series - Replaces Weasler® 12 Series
32
1800 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1" 2¹¹⁄₃₂" 3¹⁄₈" 1-1875
Cross and Bearing Kit: Inside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 18-7403
1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 18-7406
Note: Tractor end use only
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 4¹¹⁄₃₂" 56-3001 18-7330
1³⁄₈"-21 SPL 4¹¹⁄₃₂" 56-3001 18-7339
Implement YokesPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 18-7404
1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 18-7405
Note: Implement end use only
3¹⁄₈"
1"
2¹¹⁄₃₂"
L
L
L
Replacement Category 3 Series
ASAECategory 3
33
1800 SERIESImplement Yokes
Round
Set Screw or Drill Thru(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1" 3³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7115
1¹⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7117
1¹⁄₄" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7119
1³⁄₈" 3¹⁄₂" — — ¹⁷⁄₃₂" D.T. GAP ¹⁄₂" 18-7315
1³⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 18-7120
1¹⁄₂" 3¹⁄₄" ³⁄₈" EAR ⁵⁄₈" 18-7313³⁄₈"-16 EAR³⁄₈"-16 GAP
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈" 3³⁄₄" ³⁄₈"-16 EAR ⁷⁄₈" 18-7128
Hexagon
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1³⁄₈"-6 SPL 3³⁄₄" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 18-7132
Spline
Set Screw or Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1" 3⁵⁄₈" — — — 18-7125
1¹⁄₄" 3¹⁄₄" — — — 18-7127
Square
(L) Flange Bolt Hole No. ofBore Length Type Dia. Circle Dia. Holes Part Number
1¹⁄₁₆" 4⁵⁄₁₆" RECT 8" 7¹⁄₄" ¹¹⁄₃₂" 4 48-7202
Torque Limiter
L
L
L
L
L
Replacement Category 3 Series
34
1800 SERIESDouble Pivot Yoke
(L) MaximumL to L Static Angle Operating Angle Part Number
2¹⁄₈" 10O 7O 18-1800
2⁷⁄₈" 24O 22O 18-1805
3³⁄₈" 34O 31O 18-1810
c c
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number1" X 1¹⁄₈" 3³⁄₈" 73-1001 18-7327
Rectangular Shaft(L) Use W/Weld
Bore Length Part Number Part Number1" X 1¹⁄₈" 72" 18-7327 73-1001
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number1⁹⁄₃₂" X 1¹³⁄₃₂" 3³⁄₈" 70-1250 1¹⁄₄" X 1³⁄₈" 18-7328
1¹⁄₂" RD 3¹⁄₂" 70-2000 2" X .083(14GA) 18-7305
Rectangular and Round Tube(L) Wall Use W/Weld
O.D. Length Thickness Yoke Number Part Number
56-229456-2295
Slip Sleeve
1" X 1¹⁄₈" 5" YES 2" X .083(14GA) 53-2034
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
1¹⁄₄" X 1³⁄₈" 72" .125 18-7328 70-1250
2" 72" .083(14GA) 18-7305 70-2000
L
L
L
L
L
L
Replacement Category 3 Series
35
1800 SERIES
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 24" 65-1828
48" 36" 65-1840
60" 48" 65-1852
Yoke and Tube AssemblyOverall Driveline (L)
Length L to End Part Number
36" 24" 64-1828
48" 36" 64-1840
60" 48" 64-1852
c
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number60" 52" 6¹⁄₈" 69-1248
Shield Bearings are not included. Please order part number 56-2000Note: Shield can be cut shorter to fit 36" and 48" drives.
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 28" 38" 58-1828
48" 40" 62" 58-1840
60" 52" 86" 58-1852
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁄₁₆" ¹¹⁄₃₂" 69-1248 56-2000
Note: Two (2) Bearings per box
L
L
L
L
c c c c
Replacement Category 3 Series
36
1800 SERIESFriction Clutch
2 Plate(L) Friction Disc Repair
Bore Length Flange O.D. Part Number Part Number
L
1³⁄₈"-6 SPL 5⁷⁄₈" 7¹⁄₈" 61-1200* 80-1802
* Two (2) per box
Shear Bolt: Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number
L
1³⁄₈"-6 SPL 6³⁄₈" 56-3001 18-7506
Replacement Category 3 Series
Notes
37
2000 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1¹⁄₈" 2⁵⁄₈" 2⁵⁄₈" 1-2075
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 20-9309
1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 20-9325
Note: Tractor end use only
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 4³⁄₄" 56-3001 20-9330
1³⁄₈"-21 SPL 4³⁄₄" 56-3001 20-9321
Implement YokesPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹⁄₄" 56-1857 20-9319
1³⁄₈"-21 SPL 4¹⁄₄" 56-1857 20-9324
Note: Implement end use only
1¹⁄₈"
2⁵⁄₈"
L
L
L
Replaces Rockwell® L14N Series - Replaces Weasler® 14 Series
ASAECategory 3
38
2000 SERIESImplement Yokes
Round
Set Screw or Drill Thru(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1" 3³⁄₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9115
1¹⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9117
1³⁄₁₆" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9118
1¹⁄₄" 3³�₄" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9302
1¹⁄₄" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9119
1³⁄₈" 3³⁄₄" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9120
1³⁄₈" 3³⁄₄" — — ⁷⁄₁₆" D.T. GAP ¹³⁄₁₆" 20-9189
1⁷⁄₁₆" 3³⁄₄" ³⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9154
1¹⁄₂" 3³⁄₄" ³⁄₈" GAP ⁷⁄₈" 20-9307³⁄₈"-16 EAR³⁄₈"-16 GAP
¹⁄₄"⁵⁄₁₆"
¹⁄₄"⁵⁄₁₆"
¹⁄₄"⁵⁄₁₆"
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Round-Double Keyway
1¹⁄₈" 3³⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9216
1³⁄₁₆" 3³⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9217
1¹⁄₄" 3³⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 20-9218
HexagonSet Screw
(L) DistanceBore Length Hole Size Loc. to End Part Number
1¹⁄₄" 4" ¹⁄₄"-28 GAP 1¹⁄₂" 20-9191
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈" 3³⁄₄" ¹⁄₄" GAP ⁷⁄₈" 20-9318
1¹⁄₄" 3³⁄₄" ¹⁄₄" GAP ⁷⁄₈" 20-9317
1³⁄₈" 3¹⁄₂" ¹⁷⁄₃₂" GAP ¹⁄₂" 20-9160
1¹⁄₂" 3³⁄₄" ¹⁄₄" GAP ⁷⁄₈" 20-9320
Shear
L
L
L
L
Replaces Rockwell® L14N Series - Replaces Weasler® 14 Series
39
2000 SERIES
Set Screw or Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈"-6 SPL 3⁷⁄₁₆" ²¹⁄₆₄" GAP 1¹⁄₁₆" 20-9180
1¹⁄₄"-6 SPL 2³⁄₄" ¹¹⁄₃₂" GAP 1" 20-9311
1¹⁄₄"-6 SPL 3¹⁄₂" ¹⁄₂"-20 GAP 1¹⁄₁₆" 20-9306*
1³⁄₈"-6 SPL 3³⁄₄" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 20-9132
1³⁄₈"-21 SPL 3³⁄₄" ²¹⁄₆₄" GAP ⁷⁄₈" 20-9193
*Note: For use with part number 53-2047
SplineImplement Yokes
L
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
⁷⁄₈" X 1"* 3³⁄₄" ³⁄₈"-16 EAR ⁷⁄₈" 20-9310
1¹⁄₈" 3³⁄₄" ³⁄₈"-16 GAP ⁷⁄₈" 20-9183
1¹⁄₄" 3⁹⁄₁₆" ³⁄₈"-16 GAP ³⁄₄" 20-9127
*Double Square
Square
Torque Limiter
1¹⁄₁₆" 4⁵⁄₁₆" RECT 8" 7¹⁄₁₆" ¹¹⁄₃₂" 4 48-9202
(L) Flange Bolt Hole No. ofBore Length Type Dia. Circle Dia. Holes Part Number
L
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number1" X 1¹⁄₈" 3³⁄₁₆" 73-1001 20-9126
1" X 1¹⁄₈" 3³⁄₁₆" 73-1001 20-9129*
*Common phasing for Weasler® manufactured drives
Weasler® drives are phased 90° off from Neapco drives and therefore arenot interchangeable in half-shaft sub-assemblies.
L
Rectangular Shaft(L) Use W/Weld
Bore Length Part Number Part Number1" X 1¹⁄₈" 72" 20-9126 73-1001
L
Replaces Rockwell® L14N Series - Replaces Weasler® 14 Series
40
2000 SERIESRound and Rectangular Tube Weld Yoke
(L) Use W/TubeBore Length Part Number For Tube Part Number
1¹⁄₂" RD 4" 70-2000 2" X .083(14GA) 20-9131
1⁹⁄₃₂" X 1¹³⁄₃₂" RECT 3³⁄₁₆" 70-1250 1¹⁄₄"X1³⁄₄" 20-9313
Round and Rectangular Tube(L) Wall Use W/Weld Yoke
O.D. Length Thickness Part Number Part Number
2" 72" .083(14GA) 20-9131 70-2000
1¹⁄₄" X 1³⁄₈" 72" .125 20-9313 70-1250
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Slip Sleeve
1" X 1¹⁄₈" 5" YES 2" X .083(14GA) 53-203456-229456-2295
L
L
L
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 28³⁄₁₆" 44³⁄₁₆" 58-2028
48" 40" 68⁵⁄₁₆" 58-2040
60" 52" 80¹⁄₄" 58-2052
L
Bearing (L) Use W/Tube PartDiameter Diameter End to Weld Part Number Number
Bearing Stub
1¹⁄₄"-6 SPL 1³⁄₈" 4¹⁄₂" 70-2000 53-2047*
*Note: For use with part number 20-9306Drilled for cone pointed set screw
L
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 23⁵⁄₈" 65-2828
48", 60" 35³⁄₄ " 65-2840L
c c c c
Replaces Rockwell® L14N Series - Replaces Weasler® 14 Series
41
2000 SERIESYoke, Tube, and Sleeve Assembly
Overall Driveline (L)Length L to End Part Number
36" 24³⁄₄" 64-2728
48" 36⁹⁄₁₆" 64-2740
60" 48⁹⁄₁₆" 64-2752
c
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number60" 52" 6¹⁄₈" 69-1248
Shield Bearings are not included. Please order part number 56-2000Note: Shield can be cut shorter to fit 36" and 48" drives.
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁄₁₆" ¹¹⁄₃₂" 69-1248 56-2000
Note: Two (2) Bearings per box
L
L
Shear Bolt: Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number
L1³⁄₈"-6 SPL 6¹⁄₃₂" 56-3001 20-9506
1³⁄₈"-21 SPL 6¹⁄₃₂" 56-3001 20-9521
Replaces Rockwell® L14N Series - Replaces Weasler® 14 Series
Notes
42
2200 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2-2275
1¹⁄₄" 3⁷⁄₃₂" 3⁷⁄₃₂" 2-2276*
*Greaseable Thru (2) Bearings
Cross and Bearing Kit: Outside Lock-Up
1¹⁄₄" 1¹⁄₄"
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹³⁄₁₆" 56-1857 22-2312
1³⁄₈"-21 SPL 4¹³⁄₁₆" 56-1857 22-2317
Note: Tractor end use only
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 5" 56-3001 22-2330
1³⁄₈"-21 SPL 5" 56-3001 22-3521
1³⁄₄"-20 SPL 6" 56-2669 22-1319
L
Implement YokesPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4¹³⁄₁₆" 56-1857 22-2315
1³⁄₈"-21 SPL 4¹³⁄₁₆" 56-1857 22-2316
Note: Implement end use only
L
L
3⁷⁄₃₂"
Replaces Rockwell® L35N Series - Replaces Weasler® 35 Series
ASAECategory 4
43
2200 SERIESImplement Yokes
Set Screw or Drill Thru(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Round-Double Keyway
1" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1131
1¹⁄₈" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1132
1³⁄₁₆" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1129
1¹⁄₄" 4³⁄₁₆" ¹⁄₄" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1133
1¹⁄₄" 4³⁄₁₆" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1116
1³⁄₈" 4³⁄₁₆" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1118
1³⁄₈" 4³⁄₁₆" ³⁄₈" EAR ³⁄₄" 22-1155
1³⁄₈" 4¹⁄₈" ³⁄₈" EAR ²¹⁄₆₄"-D.T. GAP 1¹⁄₄" 22-1158
1⁷⁄₁₆" 4³⁄₁₆" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1119
1⁷⁄₁₆" 4³⁄₁₆" ³⁄₈" EAR 1" 22-1178
1¹⁄₂" 4³⁄₁₆" ³⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1120
1¹⁄₂" 4³⁄₁₆" ³⁄₈" EAR ⁷⁄₈" 22-1154
1⁵⁄₈" 4³⁄₈" ³⁄₈" EAR ³⁄₈"-16 EAR ⁵⁄₈" 22-1338
1³⁄₄" 4³⁄₈" ³⁄₈" EAR 22-1316
1¹⁄₄" 4³⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1218
1³⁄₈" 4³⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 22-1219
¹⁄₄"⁵⁄₁₆"
⁵⁄₁₆"³⁄₈"
Round
L
L
³⁄₈"-16 EAR²⁵⁄₆₄"-D.T. GAP
³⁄₈"-16 EAR⁷⁄₁₆"-D.T. GAP
³⁄₈"-16 EAR³⁄₈"-16 GAP
³⁄₈"-16 EAR ⁷⁄₈"¹⁷⁄₆₄"-D.T. GAP 1³⁄₈"
Replaces Rockwell® L35N Series - Replaces Weasler® 35 Series
44
2200 SERIES
Set Screw or Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
Implement YokesSpline
(L) Drill Thru DistanceBore Length Hole Size Loc. to End Part Number
Shear
1¹⁄₄" 4³⁄₁₆" ¹⁄₄" GAP ⁷⁄₈" 22-1145
1³⁄₈" 4³⁄₁₆" ¹⁷⁄₃₂" GAP ³⁄₄" 22-1337
1¹⁄₂" 4³⁄₁₆" ¹⁄₂" GAP ¹¹⁄₁₆" 22-1162
1¹⁄₈"-6 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP 1¹⁄₄" 22-1142
1³⁄₈"-6 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP 1¹⁄₄" 22-1134
1³⁄₈"-6 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP ¹⁵⁄₁₆" 22-1138
1³⁄₈"-6 SPL 4¹⁄₈" ¹⁄₂"-20 GAP 1¹⁄₁₆" 22-1226*
1³⁄₈"-21 SPL 4³⁄₁₆" ²¹⁄₆₄" D.T. GAP 1¹⁄₄" 22-1330
*Note: For use with Part Number 53-2247
L
L
Square
1³⁄₈"-6 SPL 4³⁄₄" ²¹⁄₆₄" ⁵⁄₁₆" 22-1140
1³⁄₈"-21 SPL 4³⁄₄" ¹⁷⁄₃₂" ¹⁄₂" 22-1105
1³⁄₄"-20 SPL 4¹³⁄₁₆" ¹⁷⁄₃₂" ¹⁄₂" 22-2275
Set Screw or Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1" 4³⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₈" 22-1125
1¹⁄₈" 4³⁄₁₆" ³⁄₈"-16 EAR ⁷⁄₈" 22-1124
1³⁄₁₆" 4¹⁄₂" ¹³⁄₃₂" D.T. GAP ¹¹⁄₃₂" 22-1190
1¹⁄₄" 4¹⁄₈" ³⁄₈"-16 GAP ⁷⁄₈" 22-1128
1¹⁄₂" 4¹⁄₈" — — — 22-1130
1⁵⁄₈" 4¹⁄₈" — — — 22-1126
Clamp(L) Drill Thru
Bore Length Hole Size Bolt Fit Part Number
L
L
Replaces Rockwell® L35N Series - Replaces Weasler® 35 Series
45
2200 SERIESImplement Yokes
Torque Limiter
(L) MaximumL to L Static Angle Operating Angle Part Number
Double Pivot YokeL
L
2¹⁄₈" 16O 14O 22-2200
7¹⁄₄" 90O 45O 22-2205
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number
L
1³⁄₁₆" SQ 3⁵⁄₈" 73-1188 22-1344
L
(L) Use W/Weld YokeSize Length Part Number Part Number
Square Shaft
1³⁄₁₆" 72" 22-1344 73-1188
Tube Weld Yoke(L) Use W/Tube Part
Bore Length Part Number For Tube Number
1⁵⁄₈" RD 4¹⁄₂" 70-2250 2¹⁄₄" X .120(11GA) 22-1343
1⁵⁄₈" RD 4¹⁄₂" 70-2125 2¹⁄₈" X .120(11GA) 22-1325
1⁵⁄₈" RD 4¹⁄₂" 2¹⁄₈" X .083(14GA) 22-1307
Round Tube(L) Wall Use W/Weld Yoke Part
O.D. Length Thickness Part Number Number
2¹⁄₈" 72" .120 (11GA) 22-1325 70-2125
2¹⁄₈" 72" .083 (14GA) 22-1307 —
2¹⁄₄" 72" .120 (11GA) 22-1343 70-2250
L
L
c c
1¹⁄₁₆" 4⁵⁄₁₆" RECT 8" ¹¹⁄₃₂" D.T. 4 48-1181
(L) Flange No. ofBore Length Type Dia. Hole Size Holes Part Number
Replaces Rockwell® L35N Series - Replaces Weasler® 35 Series
46
2200 SERIES
(L) Lube Shield PartBore Length Fitting For Tube Brg. No. Number
Slip Sleeve
L56-229456-2295
56-229456-2295
1³⁄₁₆" SQ 5" YES 2¹⁄₄" X .120(11GA) 53-2434
1³⁄₁₆" SQ 5" YES 2¹⁄₈" X .120(11GA) 53-2435
1³⁄₁₆" SQ 5" YES 2¹⁄₈" X .083(14GA) — 53-3500
Bearing (L) Use W/Tube PartDiameter Diameter End to Weld Part Number Number
Bearing Stub
1³⁄₈"-6 SPL 1³⁄₈" 4¹⁄₂" 70-2250 53-2247*
*Note: For use with part number 22-1226Drilled for cone pointed set screw
Yoke and Shaft Assembly
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 28¹⁄₂" 44¹⁄₂" 58-2229
48" 39" 65" 58-2239
60" 51" 77" 58-2251
Overall Driveline (L)Length L to End Part Number
36" 23⁷⁄₈" 65-2629
48", 60" 33⁷⁄₈" 65-2639
c
L
L
L
c c c c
Yoke, Tube, and Sleeve AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 24⁵⁄₈" 64-2529
48" 35¹⁄₈" 64-2539
60" 47¹⁄₈" 64-2551
L
Replaces Rockwell® L35N Series - Replaces Weasler® 35 Series
47
2200 SERIESWorld ShieldTM Plastic
Overall Driveline (L)Length Length Bell O.D. Part Number
60" 51" 7¹⁄₁₆" 69-2248
Shield Bearings are not included. Please order part number 56-2200Note: Shield can be cut shorter to fit 36" and 48" drives.
L
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁄₁₆" ¹¹⁄₃₂" 69-2248 56-2200
Note: Two (2) Bearings per box
Friction ClutchLight Duty
(L) Friction Disc RepairBore Length Flange O.D. Part Number Part Number
LHeavy Duty
L
80O CV DriveshaftTractor (L) (L)Yoke Min. L to L Max. L to L Part Number
1³⁄₈"-6 SPL 48" 65⁷⁄₁₆" 80-3506
1³⁄₈"-21 SPL 48" 65⁷⁄₁₆" 80-3521
Repair parts found on page 64.
1³⁄₈"-6 SPL 7¹¹⁄₁₆" 8¹⁄₄" 61-2200* 80-3502
* Two (2) per box
(L) Friction Disc RepairBore Length Flange O.D. Part Number Part Number
1³⁄₈"-6 SPL 7¹¹⁄₁₆" 8¹⁄₄" 61-2200* 80-3504
* Two (2) per box
c c c c
L
Shear Bolt: Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number
L1³⁄₈"-6 SPL 6⁷⁄₈" 56-3001 22-9506
1³⁄₈"-21 SPL 6⁷⁄₈" 56-3001 22-9521
Replaces Rockwell® L35N Series - Replaces Weasler® 35 Series
48
C.V. REPAIR PARTSBearing Overall Journal
Diameter Length Length Part Number
1¹⁄₄" 3¹⁄₂" 3¹³⁄₁₆" 2-2475
Cross and Bearing Kit
(L) Collar Repair KitBore Length Part Number Part Number
Collar Type Q.D.
L
1³⁄₈"-6 SPL 5¹¹⁄₃₂" 56-3001 24-2406
1³⁄₈"-21 SPL 5¹¹⁄₃₂" 56-3001 24-2421
1³⁄₄"-20 SPL 5¹⁹⁄₃₂" 56-2669 24-2420
(L)L to L Part Number
C.V. Housing
(L)Length Part Number
Shaft Weld Yoke
(L)Size Length Part Number
Spline Shaft
Bearing (L) Lube Shield Brg.Diameter Length Fitting For Tube Number Part Number
1⁵⁄₈"-10 SPL 6" Yes 2¹⁄₄" X .120(11GA) 56-2295 53-2415
Sleeve
Overall Length Part Number
Shield Set
58" Shield Set includes yoke and sleeve bearings. 68-2244
Overall Length Part Number
Shield Set
7¹⁄₁₆" Housing Shield set includes cone, bearing, and ring. 68-2245
L
L
L
L
4³⁄₃₂"1¹⁄₄"
1⁵⁄₈"-10 SPL 27⁷⁄₈" 72-2231
2⁵⁄₈" 24-2401
4¹⁄₄" 24-2400c c
2200 / N44 Series
49
N44 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1⁵⁄₁₆" 2⁵¹⁄₆₄" 4¹⁄₃₂" 3-0044
Cross and Bearing Kit: Inside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 4⁷⁄₈" 56-1857 44-2220
1³⁄₈"-21 SPL 4⁷⁄₈" 56-1857 44-2201
1³⁄₄"-20 SPL 4⁷⁄₈" 56-2446 44-6300
Note: Tractor end use only
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 5⁷⁄₃₂" 56-3001 44-4406
1³⁄₈"-21 SPL 5⁷⁄₃₂" 56-3001 44-4421
Implement YokesRound
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1⁷⁄₁₆" 4¹⁄₈" ³⁄₈" EAR ³⁄₈"-16 GAP ³⁄₄" 44-2360
1¹⁄₂" 4¹⁄₈" ³⁄₈" EAR ⁷⁄₈" 44-2460
1⁵⁄₈" 4¹⁄₈" ³⁄₈" EAR ³⁄₈"-16 EAR ⁷⁄₈" 44-2610
1³⁄₄" 4¹⁄₈" ³⁄₈" EAR ⁷⁄₈" 44-2820
2" 4¹⁄₈" ¹⁄₂" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-3200
³⁄₈"-16 EAR³⁄₈"-16 GAP
³⁄₈"-16 EAR³⁄₈"-16 GAP
L
L
L
2⁵¹⁄₆₄"
1⁵⁄₁₆"
4¹⁄₃₂"
Replaces Rockwell® 44R Series - Replaces Weasler® 44 Series
ASAECategory 5
50
N44 SERIESImplement Yokes
¹⁄₄"⁵⁄₁₆"
¹⁄₄"⁵⁄₁₆"
⁵⁄₁₆"³⁄₈"
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Round-Double Keyway
1¹⁄₄" 4¹⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-2045
1³⁄₈" 4¹⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-2256
1¹⁄₂" 4¹⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 44-2456
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1³⁄₈"-6 SPL 4¹⁄₈" ²¹⁄₆₄" GAP ⁷⁄₈" 44-2206
1³⁄₈"-21 SPL 4¹⁄₈" ²¹⁄₆₄" GAP ⁷⁄₈" 44-2221
Spline
Set Screw(L) Distance
Bore Length Hole Size Loc. to End Part Number
1¹⁄₈" 4¹⁄₈" ³⁄₈"-16 EAR ⁷⁄₈" 44-1826
Square
L
L
L
(L) Drill ThruBore Length Hole Size Bolt Fit Part Number
Clamp
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number1⁵⁄₁₆" SQ 4¹⁄₈" 73-1313 44-2100
Square Shaft(L) Use W/Weld
Bore Length Part Number Part Number1⁵⁄₁₆" SQ 72" 44-2100 73-1313
L
L
1³⁄₄"-20 SPL 5" ⁴¹⁄₆₄" ⁵⁄₈" 44-4475
Replaces Rockwell® 44R Series - Replaces Weasler® 44 Series
51
N44 SERIES
1⁷⁄₈" RD 4⁷⁄₈" 70-2500 2¹⁄₂" X .134(10GA) 44-2200
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number
L
Round Tube(L) Wall Use W/Weld Yoke
O.D. Length Thickness Part Number Part Number
2¹⁄₂" 72" .134(10GA) 44-2200 70-2500L
Slip Sleeve
1³⁄₁₆" 5" YES 2¹⁄₄" X .120(11GA) 56-2295 53-2434
1⁵⁄₁₆" 5" YES 2¹⁄₂" X .134(10GA) — 53-2643
1⁵⁄₁₆" 5" YES 2³⁄₄" X .109(12GA) 56-2646 53-2644
L
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 28¹⁄₂" 41¹⁵⁄₁₆" 58-4429
48" 39" 65" 58-4439
60" 50⁷⁄₁₆" 76⁷⁄₁₆" 58-4451
L
c c c c
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Numberc
36" 22⁷⁄₈" 65-4423
48", 60" 35³⁄₈" 65-4435
L
Yoke, Tube, and Sleeve AssemblyOverall Driveline (L)
Length L to End Part Number
36" 24¹⁄₈" 64-4424
48" 34⁵⁄₈" 64-4435
60" 46¹⁄₈" 64-4447
c
L
Replaces Rockwell® 44R Series - Replaces Weasler® 44 Series
52
N44 SERIESWorld ShieldTM Plastic
Overall Driveline (L)Length Length Bell O.D. Part Number
60" 51" 8" 69-2648
Shield Bearings are not included. Please order part number 56-0844Note: Shield can be cut shorter to fit 36" and 48" drives.
L
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2⁵⁄₈" ¹³⁄₃₂" 69-2648 56-0844
Note: Two (2) Bearings per box
4 Plate
(L) Friction Disc RepairBore Length Flange O.D. Part Number Part Number
Friction Clutch2 Plate
L
L
1³⁄₈"-6 SPL 6¹³⁄₁₆" 8¹⁄₈" 61-1200* 80-4402
* Two (2) per box
(L) Friction Disc RepairBore Length Flange O.D. Part Number Part Number
1³⁄₈"-6 SPL 7¹¹⁄₁₆" 8¹⁄₈" 61-1200* 80-4404
* Two (2) per box
80O CV DriveshaftTractor (L) (L)Yoke Min. L to L Max. L to L Part Number
1³⁄₈"-6 SPL 48" 64 " 80-4406
1³⁄₈"-21 SPL 48" 64" 80-4421
Repair parts found on page 59.
c c c c
L
Replaces Rockwell® 44R Series - Replaces Weasler® 44 Series
53
C.V. REPAIR PARTSBearing Overall JournalDiameter Length Length Part Number
1¹⁄₄" 3¹⁄₂" 3¹³⁄₁₆" 2-2475
Cross and Bearing Kit
(L) Collar Repair KitBore Length Part Number Part Number
Collar Type Q.D.
L
1³⁄₈"-6 SPL 5¹¹⁄₃₂" 56-3001 24-2406
1³⁄₈"-21 SPL 5¹¹⁄₃₂" 56-3001 24-2421
1³⁄₄"-20 SPL 5¹⁹⁄₃₂" 56-2669 24-2420
(L)L to L Part Number
C.V. Housing
(L)Length Part Number
Shaft Weld Yoke
(L)Size Length Part Number
Spline Shaft
Bearing (L) Lube Shield Brg.Diameter Length Fitting For Tube Number Part Number
1⁵⁄₈"-10 SPL 6" Yes 2¹⁄₄" X .120(11GA) 56-2295 53-2415
Sleeve
Overall Length Part Number
Shield Set
58" Shield Set includes yoke and sleeve bearings. 68-2244
Overall Length Part Number
Shield Set
7¹⁄₁₆" Housing Shield set includes cone, bearing, and ring. 68-2245
L
L
L
L
1¹⁄₄"
1⁵⁄₈"-10 SPL 27⁷⁄₈" 72-2231
2⁵⁄₈" 24-2401
4¹⁄₄" 24-2400c c
2200 / N44 Series
4³⁄₃₂"
54
2600 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1³⁄₈" 4³⁄₁₆" 4³⁄₁₆" 3-0188
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 5¹⁄₄" 56-1857 26-5321
1³⁄₈"-21 SPL 5¹⁄₁₆" 56-1857 26-5319
Note: Tractor end use only
Collar Type Q.D.(L) Collar Repair Kit
Bore Length Part Number Part Number1³⁄₈"-6 SPL 5⁷⁄₁₆" 56-3001 26-5306
1³⁄₈"-21 SPL 5⁷⁄₁₆" 56-3001 26-5325
1³⁄₄"-20 SPL 6" 56-2669 26-5163
Implement YokesPin Type Q.D.
(L) Pin Repair KitBore Length Part Number Part Number
1³⁄₈"-6 SPL 5¹⁄₄" 56-1857 26-5324
1³⁄₈"-21 SPL 5¹⁄₁₆" 56-1857 26-5323
Note: Implement end use only
1³⁄₈"
L
L
L
4³⁄₁₆"
Replaces Walterscheid AgMaster® 1480 Series
ASAECategory 6
55
2600 SERIESImplement Yokes
Round
Set Screw(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
1³⁄₈" 4¹⁄₂" ⁵⁄₁₆" EAR ³⁄₈"-16 GAP ⁷⁄₈" 26-5118
1¹⁄₂" 4¹⁄₂" ³⁄₈" EAR ³⁄₈"-16 GAP ⁷⁄₈" 26-5119
1³⁄₄" 4¹⁄₁₆" ³⁄₈" EAR ³⁄₈"-16 GAP ³⁄₄" 26-5131
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1³⁄₈"-6 SPL 4¹⁄₂" ²¹⁄₆₄" GAP ¹⁵⁄₁₆" 26-5138
Spline
L
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number1⁵⁄₁₆" SQ 4⁵⁄₈" 73-1313 26-5148
Square Shaft(L) Use W/Yoke
Bore Length Part Number Part Number1⁵⁄₁₆" 72" 26-5148 73-1313
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number2" RD 5¹⁄₄" 70-2750 2³⁄₄" X .109(12GA) 26-5155
L
L
L
Round Tube(L) Wall Use W/Weld Yoke
O.D. Length Thickness Part Number Part Number
2³⁄₄" 72" .109(12GA) 26-5155 70-2750L
Replaces Walterscheid AgMaster® 1480 Series
56
2600 SERIES
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Slip Sleeve
1⁵⁄₁₆" 5" YES 2³⁄₄" X .109(12GA) 56-2646 53-2644
Yoke and Shaft AssemblyOverall Driveline (L)
Length L to End Part Number
36" 23⁵⁄₈" 65-6629
60" 34¹⁄₄ " 65-6639
Yoke and Tube AssemblyOverall Driveline (L)
Length L to End Part Number
36" 24" 64-6529
48" 33³⁄₈" 64-6539
60" 46¹⁄₈" 64-6551
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number60" 51" 8" 69-2648
Shield Bearings are not included. Please order part number 56-2600Note: Shield can be cut shorter to fit 36" and 48" drives.
Drive Shaft with World ShieldTM
Overall Driveline (L) (L)Length Min. L to L Max. L to L Part Number
36" 28⁷⁄₈" 42⁵⁄₈" 58-2629
48" 38¹⁄₄" 62⁵⁄₈" 58-2639
60" 51" 75³⁄₈" 58-2651
L
L
L
L
L
c
c
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2⁷⁄₈" ¹¹⁄₃₂" 69-2648 56-2600
Note: Two (2) Bearings per box
c c c c
Replaces Walterscheid AgMaster® 1480 Series
57
N55 SERIES
Lock-Up OverallBearing Dia. Dim. Length Part Number
1¹⁷⁄₃₂" 4⁵⁄₁₆" 4⁵⁄₁₆" 3-0045
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Quick DisconnectPin Type Q.D.
(L)Bore Length Part Number
1³⁄₈"-6 SPL 5¹⁄₈" 55-9306
1³⁄₈"-21 SPL 5¹⁄₈" 55-9321
1³⁄₄"-20 SPL 6¹⁄₈" 55-9320
Note: Tractor end use only
Set Screw or Drill Thru(L) Keyway Dist. Part
Bore Length Width Loc. Hole Size Loc. to End Number
Implement YokesRound
1¹⁄₂" 4⁵⁄₈" ³⁄₈" EAR ³⁄₈"-16 EAR 1" 55-2410
1⁵⁄₈" 4¹⁄₂" ³⁄₈" EAR ³⁄₈"-16 EAR 1" 55-2600
1³⁄₄" 4¹⁄₁₆" ³⁄₈" EAR ³⁄₈"-16 EAR ³⁄₄" 55-2800
2" 5⁵⁄₈" ¹⁄₂" EAR ¹⁄₂"-13 EAR 1¹⁄₁₆" 55-3240
Clamp
4⁵⁄₁₆"
1¹⁷⁄₃₂"
L
L
1³⁄₄"-20 SPL 5⁵⁄₈" ⁴¹⁄₆₄" ⁵⁄₈" 55-2836
(L) Drill ThruBore Length Hole Size Bolt Fit Part Number
L
Replaces Rockwell® 55N Series - Replaces Weasler® 55 Series
ASAECategory 6
58
N55 SERIESImplement Yokes
Drill Thru(L) Distance
Bore Length Hole Size Loc. to End Part Number
1³⁄₈"-6 SPL 5⁵⁄₈" ²¹⁄₆₄" GAP 1" 55-2229
Spline
L
Shaft Weld Yoke(L) Use W/Shaft
Bore Length Part Number Part Number1⁵⁄₁₆" SQ 4¹⁄₈" 73-1313 55-2130
— 4⁵⁄₈" 70-2500 2¹⁄₂" X .134(10GA) 55-3640
Square Shaft(L) Use W/Weld
Bore Length Part Number Part Number1⁵⁄₁₆" 72" 55-2130 73-1313
Tube Weld Yoke(L) Use W/Tube
Bore Length Part Number For Tube Part Number
L
L
LRound Tube
(L) Wall Use W/Weld YokeO.D. Length Thickness Part Number Part Number
2¹⁄₂" 72" .134(10GA) 55-3640 70-2500
(L) Lube Shield PartI.D. Length Fitting For Tube Brg. No. Number
Slip Sleeve
1⁵⁄₁₆" 5" YES 2¹⁄₂" X .134(10GA) — 53-2643
L
L
World ShieldTM PlasticOverall Driveline (L)
Length Length Bell O.D. Part Number60" 51" 8" 69-2648
Shield Bearings are not included. Please order part number 56-0844Note: Shield can be cut shorter to fit 36" and 48" drives.
L
Replaces Rockwell® 55N Series - Replaces Weasler® 55 Series
59
N55 SERIESShield Bearing
Bearing Use W/ShieldBearing I.D. Width Part Number Part Number
2⁵⁄₈" ¹³⁄₃₂" 69-2648 56-0844
Note: Two (2) Bearings per box
Replaces Rockwell® 55N Series - Replaces Weasler® 55 Series
Notes
60
WORLD SHIELDTM
Shield Part Number 69-0648 69-1248 69-2248 69-2648
Important Shield Dimensions
Overall Shield Length (in.) 51" 51" 51" 51"Shield Bell O.D (in.) 5¹⁄₄" 6¹⁄₈" 7¹⁄₁₆ " 8"Inner Tube O.D. (in.) 2¹⁄₁₆" 2¹⁄₂" 2³⁄₄ " 3⁷⁄₁₆"Outer Tube O.D. (in.) 2⁵⁄₁₆" 2³⁄₄" 3" 3¹¹⁄₁₆"
PTO Groove GroovePTO Manufacturer's Bearing O.D. Width Shield
Manufacturer Series Part Number (in.)* (in.) Part Number
Indexed by PTO Manufacturer and Series
AgMaster 1140, 1240 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-1248(Walterscheid) 1340 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-2248
1440 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-26481480 56-2600 2⁷⁄₈" ¹¹⁄₃₂" 69-2648
Bondioli & Pavesi 1 56-2101 1¹⁹⁄₃₂" ⁵⁄₃₂" 69-0648(1¹¹⁄₃₂")
2 56-2102 1⁷⁄₈" ⁵⁄₃₂" 69-0648(1¹⁹⁄₃₂")
3, 4 56-4103 2³⁄₃₂" ⁵⁄₃₂" 69-1248(1¹³⁄₃₂")
5 56-6105 2¹⁵⁄₃₂" ⁵⁄₃₂" 69-2248(2³⁄₃₂")
6 56-6106 2¹¹⁄₁₆" ⁵⁄₃₂" 69-2248(2¹¹⁄₃₂")
7 56-6106 2¹⁸⁄₃₂" ⁵⁄₃₂" 69-2248(2¹¹⁄₁₆")
8 56-8108 2¹¹⁄₁₆" ¹⁄₄" 69-2648(3³⁄₁₆")
G & G 6N 56-1600 1¹³⁄₁₆" ⁵⁄₁₆" 69-064812N, 14N 56-2000 2¹⁄₁₆" ³⁄₈" 69-1248
35N 56-2200 2¹⁄₁₆" ³⁄₈" 69-224844N 56-0844 2⁵⁄₈" ⁷⁄₁₆" 69-2648
Neapco N1000 56-0600 1¹⁄₂" ⁵⁄₁₆" 69-0648L600 56-1600 1¹³⁄₁₆" ⁵⁄₁₆" 69-0648
1200, 1800, 2000 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-12482200 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-22482600 56-2600 2⁷⁄₈ ¹¹⁄₃₂" 69-2648
N44, N55 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-2648
Rockwell 6R 56-1600 1¹³⁄₁₆" ⁵⁄₁₆" 69-064812R, 14R 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-1248
35R 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-224844R 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-2648
Walterscheid 2100 56-2122 1⁵⁄₈" ⁵⁄₃₂" 69-06482200, I, 2300 56-2223 1³¹⁄₃₂" ⁷⁄₃₂" 69-1248
2400 56-2324 2¹⁵⁄₃₂" ⁷⁄₃₂" 69-22482500 56-2324 2¹⁵⁄₃₂" ⁷⁄₃₂" 69-2248
Weasler 6 56-1600 1¹³⁄₁₆" ⁵�₁₆" 69-064812, 14 56-2000 2¹⁄₁₆" ¹¹⁄₃₂" 69-1248
35 56-2200 2¹⁄₁₆" ¹¹⁄₃₂" 69-224844, 55 56-0844 2⁵⁄₈" ¹³⁄₃₂" 69-2648
* Dimensions in parenthesis() denote bearing groove O.D. of inner yoke/tube assembly versus bearing groove O.D. of outeryoke/tube assembly.
ShieldLength
ShieldBell O.D.
Bearing Width
Bearing I.D.Groove
O.D.
Groove Width
World ShieldTM BearingWorld ShieldTM Shield PTO Yoke
Universal Fit Shield System
61
Bore Part Number
Collar Type
1"-15 SPL 56-0615
1³⁄₈"-6 SPL & 21 SPL 56-3001
1³⁄₄"-20 SPL 56-2669
Bore Part Number
Trailing Pin Type
1³⁄₈"-6 SPL & 21 SPL 56-1857
1³⁄₄"-20 SPL 56-2446
Style Series O.D. I.D. Width Part Number
Bearings for Rigid Plastic Shields
2pc Nylon N1000 — — ⁹⁄₃₂" 56-0604
3pc Nylon 1200,1800,2000,2200 — — ⁹⁄₃₂" 56-2004
Sleeve 2000,2200 2⁹⁄₃₂" 2" ¹⁄₄" 56-2295
Sleeve2 pc. 3 pc.
2pc N1000 2⁷⁄₆₄" 1¹⁄₂" ⁵⁄₁₆" 56-0666
1pc 1200,1800,2000,2200 2¹³⁄₁₆" 2⁵⁄₆₄" ³⁄₈" 56-2300
4pc Nylon 2600 — — ⁹⁄₃₂" 56-2604
Sleeve 1200,1800,2000,2200 2³⁄₈" 2" ¹⁄₄" 56-2294
Sleeve 2600 3⁵⁄₃₂" 2³⁵⁄₆₄" ¹⁄₄" 56-2646
Note: Shield components also service some competitor drivelines referenced on the competitorinterchangeability chart found on page 7.
Style Series O.D. I.D. Width Part Number
Bearings for Steel Shields2 pc. 1 pc. 4 pc. Sleeve
QUICK DISCONNECT REPAIR KITS
OLD STYLE SHIELD BEARINGREPLACEMENT COMPONENTS
62
Shaft Size Part Number
⁷⁄₈" 76-0013
1" 76-0015
1¹⁄₈" 76-0017
1³⁄₁₆" 76-0018
1¹⁄₄" 76-0019
Shaft Size Part Number
³⁄₄" 78-0011
¹³⁄₁₆" 78-0012
¹⁵⁄₁₆" 78-0014
1¹⁄₈" 78-0017
1³⁄₁₆" 78-0018
1¹⁄₄" 78-0019
TypeDiameter Length Head Point Part Number
³⁄₈"-16 ¹⁄₂" Allen Cup 50-2501
³⁄₈"-16 ³⁄₄" Square Cup 50-2502
¹⁄₄"-20 ¹⁄₂" Allen Cup 50-2503
* Packaged 25 per Box
Set Screws*
Hanger Bearings: Plain Bearing
Pillow Block Bearings: Plain Bearing
MISCELLANEOUS PTO PARTS
64
Rectangular ³⁄₄" X ⁷⁄₈" N1000, L600 73-0750
Rectangular 1" X 1¹⁄₈" 1200, 1800, 2000 73-1001
Square 1³⁄₁₆" 2200 73-1188
Square 1⁵⁄₁₆" 44, 2600, 55 73-1313
Type Dimensions Series Part Number
Standard Series Shafting—72" Lengths
Type Dimensions Series Part Number
Standard Tubing—72" Lengths
Rectangular 1" X 1¹⁄₈" N1000, L600 70-1001
Rectangular 1¹⁄₄" X 1³⁄₈" 1200, 1800, 2000 70-1250
Round 1⁵⁄₈" X .065(16 GA) N1000, L600 70-1625
Round 2" X .083(14 GA) 1000, 1200, 1800, 2000 70-2000
Round 2¹⁄₈" X .120(11 GA) 2200 70-2125
Round 2¹⁄₄" X .120(11 GA) 2200, 44 70-2250
Round 2¹⁄₂" X .134(10 GA) 44, 55 70-2500
Round 2³⁄₄" X .109(12 GA) 44, 2600 70-2750
Round Rectangular
Rectangular Square
³⁄₄" RD ³⁄₁₆" 71-0750
¹³⁄₁₆" RD ¹⁄₄" 71-0813
⁷⁄₈" RD ¹⁄₄" 71-0875
1" RD ¹⁄₄" 71-1000
1¹⁄₄" RD ⁵⁄₁₆" 71-1250
Type Dimensions Part Number
Solid Shafting—72" Full Length Keyway
Solid Shafting—72" LengthsShaft Size Part Number
Square Hexagon
³⁄₄" SQ 72-0750
⁷⁄₈" SQ 72-0875
1" SQ 72-1000
1¹⁄₄" SQ 73-1250
⁷⁄₈" HEX 72-0888
1" HEX 72-1002
1¹⁄₈" HEX 72-1125
Round
SHAFTING & TUBING
66
2 1-0221
4 1-0421
Series Quantity Part Number
Cross & Bearing Kits
1 2 1-01212100 2 1-10012400 2 2-2421
22200
3 2 1-03214
23005 2 2-0521
Quick Disconnect Yokes (6 spline)
{ }
{ }
1 8-2012-AR
1 8-4012-AR
Series Quantity Part Number
1 1 8-1012-AR2100 1 8-2112-AR2400 1 8-2412-AR
22200
3 1 8-3012-AR4
23005 1 8-5012-AR
{ }
{ }
METRIC AG RACK
Bondioli & Pavesi Series: 1 - 5 Walterscheid Series: 2100,2200,I,2300,2400
For additional shaft and shield safetylabels, please refer to pages 4 and 5.
Shield Safety labelPart Number NA-7232
Shaft Safety labelPart Number NA-10666
Services Popular Bondioli & Pavesi and Walterscheid Style Drivelines
67
Series Quantity Part Number Series Description Quantity Part Number
1 1 8-1030-AR2 1 8-2030-AR3 1 8-3030-AR4 1 8-4030-AR5 1 8-5030-AR
2100 1 8-2130-AR2200 1 8-2230-AR
I 1 8-0130-AR2300 1 8-2330-AR2400 1 8-2430-AR
Inner Profile Tubes—59" Lengths1 1 70-01052 1 70-02053 1 70-03054 1 70-04055 1 70-0505
2100 1 70-21052200 1 70-22052400 1 70-2405
Inner Profile Yokes End Yokes
1 1" RD Bore 1 8-1008-AR1 1¹⁄₄" RD Bore 1 8-1010-AR2
22002
2200I33 1¹⁄₄" RD Bore 1 8-3010-AR4
23004
23005 1¹⁄₄" RD Bore 1 8-5010-AR5 1³⁄₈" RD Bore 1 8-5011-AR
2100 1" RD Bore 1 8-2108-AR2100 1¹⁄₄" RD Bore 1 8-2110-AR2400 1³⁄₈" RD Bore 1 8-2411-AR
Tube Pin—10 per box8mm X 50mm 1 50-01128mm X 60mm 1 50-04128mm X 65mm 1 50-2212
10mm X 65mm 1 50-231210mm X 75mm 1 50-0512
Outer Profile Tubes—59" Lengths1 1 70-01042 1 70-03053 1 70-03045 1 70-0504
2100 1 70-21042200 1 70-22042400 1 70-2404
1 1 8-1020-AR2 1 8-2020-AR3 1 8-3020-AR4 1 8-4020-AR5 1 8-5020-AR
2100 1 8-2120-AR2200 1 8-2220-AR
I 1 8-0120-AR2300 1 8-2320-AR2400 1 8-2420-AR
Outer Profile Yokes
{ }{ }
1" RD Bore 1 8-2008-AR
1¹⁄₄" RD Bore 1 8-2010-AR
{ }{ }
1¹⁄₄" RD Bore 1 8-4010-AR
1³⁄₈" RD Bore 1 8-4011-AR
{ } 1" RD Bore 1 8-3011-AR
Plastic Shields1,2,2100 1 69-0640-MR3,4,2200,I,2300 1 69-1240-MR5,6,2400 1 69-2240-MR
Shield Bearings1 1 56-21012 1 56-2102
3,4 1 56-41035 1 56-61056 1 56-6106
2100 1 56-21222200,I,2300 1 56-2223
2400 1 56-2324
Metric AG Rack 99-0195
Complete Display
Bondioli & Pavesi Series: 1 - 5Walterscheid Series: 2100,2200,I,2300,2400
METRIC AG RACKServices Popular Bondioli & Pavesi and Walterscheid Style DrivelinesServices Popular Bondioli & Pavesi and Walterscheid Style Drivelines
68
1 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number22.0 ⁷⁄₈" 54.0 2¹⁄₈" 1-0121
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
26.6 1³⁄₆₄" 3.5 ⁹⁄₆₄" 8-1030 70-0105
Inner Profile Tube—59" Lengths(L)
22.0
54.0
L
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
26.5 1¹⁄₃₂" 79.0 3³⁄₃₂" 70-0105 8-1030
32.5 1⁹⁄₃₂" 80.0 3⁵⁄₃₂" 70-0104 8-1020
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 92.0 3⁵⁄₈" 56-0040 8-1012
1³⁄₈"-21 SPL 92.0 3⁵⁄₈" 56-0040 8-1021
Note: Tractor end use only
Replaces Bondioli & Pavesi® Design Series 1
ASAECategory 1METRIC
69
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway SIze Part Number
Implement Yokes
1 SERIES
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
32.4 1⁹⁄₃₂" 2.475 ³⁄₃₂" 8-1020 70-0104
Outer Profile Tube—59" Lengths(L)
L
8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412
Note: Fits both inner and outer profile yokes - packaged 10 per box
25.4 1" 79.0 3⁹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-1008
31.75 1¹⁄₄" 79.0 3⁹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-1010
Overall Length Bell O.D. Part Number
51" 5¹⁄₄" 69-0648
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
1¹⁹⁄₃₂" ⁵⁄₃₂"1¹¹⁄₃₂" ⁵⁄₃₂"
Note: Two (2) Bearings per box
69-0648 56-2101
L
O.D.
O.D.
Replaces Bondioli & Pavesi® Design Metric Series 1
70
2 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number23.8 ¹⁵⁄₁₆" 61.3 2¹³⁄₃₂" 1-0221
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
29.0 1⁹⁄₆₄" 4.0 ⁵⁄₃₂" 8-2030 70-0205
Inner Profile Tube—59" Lengths(L)
23.8
61.3
L
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
29.0 1⁹⁄₆₄" 82.0 3⁷⁄₃₂" 70-0205 8-2030
36.0 1¹³⁄₃₂" 84.0 3⁵⁄₁₆" 70-0305 8-2020
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2012
1³⁄₈"-21 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2021
Note: Tractor end use only
Replaces Bondioli & Pavesi® Design Series 2
ASAECategory 2METRIC
71
2 SERIES
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
36.1 1²⁷⁄₆₄" 3.1 ¹⁄₈" 8-2020 70-0305
Outer Profile Tube—59" Lengths(L)
L
8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412
Note: Fits both inner and outer profile yokes - packaged 10 per box
(L)Diameter Length
mm inches mm inches Part Number
25.4 1" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2008
31.75 1¹⁄₄" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2010
Overall Length Bell O.D. Part Number
51" 5¹⁄₄" 69-0648
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
1⁷⁄₈" ⁵⁄₃₂"1¹⁹⁄₃₂" ⁵⁄₃₂"
Note: Two (2) Bearings per box
69-0648 56-2102
L
O.D.
O.D.
Replaces Bondioli & Pavesi® Design Metric Series 2
72
3 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 70.0 2³⁄₄" 1-0321
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
36.1 1²⁷⁄₆₄" 3.1 ¹⁄₈" 8-3030 70-0305
Inner Profile Tube—59" Lengths(L)
27.0
70.0
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
36.0 1²⁷⁄₆₄" 85.0 3³⁄₈" 70-0305 8-3030
43.5 1¹¹⁄₁₆" 80.0 3⁵⁄₃₂" 70-0304 8-3020
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 102.0 4¹⁄₆₄" 56-0040 8-3012
1³⁄₈"-21 SPL 102.0 4¹⁄₆₄" 56-0040 8-3021
Note: Tractor end use only
Replaces Bondioli & Pavesi® Design Series 3
ASAECategory 3METRIC
73
3 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
43.4 1⁴⁵⁄₆₄" 3.325 ¹⁄₈" 8-3020 70-0304
Outer Profile Tube—59" Lengths(L)
L
8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412
Note: Fits both inner and outer profile yokes - packaged 10 per box
25.4 1" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3011
31.75 1¹⁄₄" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3010
34.93 1³⁄₈" 85.0 3¹¹⁄₃₂" — ¹⁷⁄₃₂" D.T. 8-3016
Overall Length Bell O.D. Part Number51" 6¹⁄₈" 69-1248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2³⁄₃₂" ⁵⁄₃₂"1¹³⁄₁₆" ⁵⁄₃₂"
Note: Two (2) Bearings per box
69-1248 56-4103
L
O.D.
O.D.
Replaces Bondioli & Pavesi® Design Metric Series 3
74
4 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 74.6 2¹⁵⁄₁₆" 1-0421
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
36.1 1²⁷⁄₆₄" 4.45 ¹¹⁄₆₄" 8-4030 70-0405
Inner Profile Tube—59" Lengths(L)
27.0
74.6
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
36.0 1²⁷⁄₆₄" 98.0 3⁵⁵⁄₆₄" 70-0405 8-4030
43.5 1¹¹⁄₁₆" 93.5 3¹¹⁄₁₆" 70-0304 8-4020
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4012
1³⁄₈"-21 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4021
Note: Tractor end use only
Replaces Bondioli & Pavesi® Design Series 4
ASAECategory 3METRIC
75
4 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
43.4 1⁴⁵⁄₆₄" 3.4 ¹⁄₈" 8-4020 70-0304
Outer Profile Tube—59" Lengths(L)
L
8.0 ⁵⁄₁₆" 60.3 2³⁄₈" 50-0412
Note: Fits both inner and outer profile yokes - packaged 10 per box
31.75 1¹⁄₄" 98.0 3⁵⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-4010
34.93 1³⁄₈" 98.0 3⁵⁵⁄₆₄" ⁵⁄₁₆" ³⁄₈"-16 8-4011
34.93 1³⁄₈" 98.0 3⁵⁵⁄₆₄" — ¹⁷⁄₃₂" D.T. 8-4016
Overall Length Bell O.D. Part Number
51" 6¹⁄₈" 69-1248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2³⁄₃₂" ⁵⁄₃₂"1¹³⁄₁₆" ⁵⁄₃₂"
Note: Two (2) Bearings per box
69-1248 56-4103
L
O.D.
O.D.
Replaces Bondioli & Pavesi® Design Metric Series 4
76
5 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number30.2 1³⁄₁₆" 80.0 3⁵⁄₃₂" 2-0521
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
44.7 1⁴⁹⁄₆₄" 4.0 ⁵⁄₃₂" 8-5030 70-0505
Inner Profile Tube—59" Lengths(L)
30.2
80.0
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
45.0 1²⁵⁄₃₂" 96.0 3²⁵⁄₃₂" 70-0505 8-5030
51.6 2¹⁄₃₂" 98.5 3⁷⁄₈" 70-0504 8-5020
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 112.0 4¹³⁄₃₂" 56-0040 8-5012
1³⁄₈"-21 SPL 112.0 4¹³⁄₃₂" 56-0040 8-5021
Note: Tractor end use only
Replaces Bondioli & Pavesi® Design Series 5
ASAECategory 4METRIC
77
5 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
51.3 2¹⁄₆₄" 3.0 ⁷⁄₆₄" 8-5020 70-0504
Outer Profile Tube—59" Lengths(L)
L
10.0 ²⁵⁄₆₄" 70.0 2³⁄₄" 50-0612
Note: Fits both inner and outer profile yokes - packaged 10 per box
31.75 1¹⁄₄" 96.0 3²⁵⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-5010
34.93 1³⁄₈" 96.0 3²⁵⁄₃₂" ⁵⁄₁₆" ³⁄₈"-16 8-5011
34.93 1³⁄₈" 96.0 3²⁵⁄₃₂" — ¹⁷⁄₃₂" D.T. 8-5016
Overall Length Bell O.D. Part Number
51" 7¹⁄₁₆" 69-2248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁵⁄₃₂" ⁵⁄₃₂"2³⁄₃₂" ⁵⁄₃₂"
Note: Two (2) Bearings per box
69-2248 56-6105
L
O.D.
O.D.
Replaces Bondioli & Pavesi® Design Metric Series 5
78
6 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number30.2 1³⁄₁₆" 92.0 3⁵⁄₈" 3-0621
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
44.7 1⁴⁹⁄₆₄" 4.0 ⁵⁄₃₂" 8-6030 70-0505
Inner Profile Tube—59" Lengths(L)
30.2
92.0
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
45.0 1²⁵⁄₃₂" 105.0 4¹⁄₈" 70-0505 8-6030
54.0 2¹⁄₈" 107.0 4⁷⁄₃₂" 70-0704 8-6020
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 122.0 4¹³⁄₁₆" 56-0040 8-6012
1³⁄₈"-21 SPL 122.0 4¹³⁄₁₆" 56-0040 8-6021
Note: Tractor end use only
Replaces Bondioli & Pavesi® Design Series 6
ASAECategory 5METRIC
79
6 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
53.6 2⁷⁄₆₄" 3.775 ⁵⁄₃₂" 8-6020 70-0704
Outer Profile Tube—59" Lengths(L)
L
10.0 ²⁵⁄₆₄" 70.0 2³⁄₄" 50-0612
Note: Fits both inner and outer profile yokes - packaged 10 per box
31.75 1¹⁄₄" 105.0 4⁹⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-6010
34.93 1³⁄₈" 105.0 4⁹⁄₆₄" ⁵⁄₁₆" ³⁄₈"-16 8-6011
34.93 1³⁄₈" 110.0 4¹¹⁄₃₂" — ¹⁷⁄₃₂" D.T. 8-6016
Overall Length Bell O.D. Part Number
51" 7¹⁄₁₆" 69-2248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
69-2248 56-6106
L
O.D.
O.D.
2¹¹⁄₁₆" ⁵⁄₃₂"2¹¹⁄₃₂" ⁵⁄₃₂"
Note: Two (2) Bearings per box
Replaces Bondioli & Pavesi® Design Metric Series 6
80
7 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number35.0 1³⁄₈" 94.0 3¹¹⁄₁₆" 3-0721
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
44.7 1³⁄₄" 5.5 ⁷⁄₃₂" 8-7030 70-0705
Inner Profile Tube—59" Lengths(L)
35.0
94.0
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
45.0 1³⁄₄" 105.0 4¹⁄₈" 70-0705 8-7030
54.0 2¹⁄₈" 107.0 4⁷⁄₃₂" 70-0704 8-7020
O.D.
1³⁄₈"-6 SPL 122.0 4¹³⁄₁₆" 56-0040 8-7012
1³⁄₈"-21 SPL 122.0 4¹³⁄₁₆" 56-0040 8-7021
1³⁄₄"-20 SPL 122.0 4¹³⁄₁₆" 56-0940 8-7014
Note: Tractor end use only
(L)Length QD
Bore mm inches Pin Kit Part Number
Replaces Bondioli & Pavesi® Design Series 7
ASAECategory 5METRIC
81
7 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length
mm inches mm inches Keyway Set Screw Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
53.6 2⁷⁄₆₄" 3.775 ⁵⁄₃₂" 8-7020 70-0704
Outer Profile Tube—59" Lengths(L)
L
10.0 ²⁵⁄₆₄" 80.0 3⁵⁄₃₂" 50-1080
Note: Fits both inner and outer profile yokes - packaged 10 per box
35.0 1³⁄₈" 105.0 4¹⁄₈" ⁵⁄₁₆" ³⁄₈"-16 8-7011
Overall Length Bell O.D. Part Number
51" 8" 69-2248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹¹⁄₁₆" ⁵⁄₃₂"2¹¹⁄₃₂" ⁵⁄₃₂"
Note: Two (2) Bearings per box
69-2248 56-6106
L
O.D.
O.D.
Replaces Bondioli & Pavesi® Design Metric Series 7
82
8 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number35.0 1³⁄₈" 106.5 4³⁄₁₆" 3-0821
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Number Number
53.6 2⁷⁄₆₄" 3.775 ⁵⁄₃₂" 8-8030 70-0704
Inner Profile Tube—59" Lengths(L)
35.0
106.5
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
54.0 2¹⁄₈" 120.0 4²³⁄₃₂" 70-0704 8-8030
63.0 2¹⁄₂" 120.0 4²³⁄₃₂" 70-0804 8-8020
O.D.
1³⁄₈"-6 SPL 125.0 4⁵⁹⁄₆₄" 56-0040 8-8012
1³⁄₈"-21 SPL 125.0 4⁵⁹⁄₆₄" 56-0040 8-8021
1³⁄₄"-20 SPL 125.0 4⁵⁹⁄₆₄" 56-0940 8-8014
Note: Tractor end use only
(L)Length QD
Bore mm inches Pin Kit Part Number
Replaces Bondioli & Pavesi® Design Series 8
ASAECategory 6METRIC
83
8 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
63.0 2¹⁄₂" 4.0 ⁵⁄₃₂" 8-8020 70-0804
Outer Profile Tube—59" Lengths(L)
L
12.0 ¹⁵⁄₃₂" 80.0 3⁵⁄₃₂" 50-1280
Note: Fits both inner and outer profile yokes - packaged 10 per box
O.D.
O.D.
(L)Bore Length
mm inches mm inches Keyway Set Screw Part Number
Implement Yokes
L
35.0 1³⁄₈" 120.0 4²³⁄₃₂" ⁵⁄₁₆" ³⁄₈"-16 8-8011
38.0 1¹⁄₂" 120.0 4²³⁄₃₂" ⁵⁄₁₆" ³⁄₈"-16 8-8015
44.5 1³⁄₄" 120.0 4²³⁄₃₂" ³⁄₈" ³⁄₈"-16 8-8016
Overall Length Bell O.D. Part Number
51" 8" 69-2648
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹¹⁄₁₆" ¹⁄₄"3³⁄₁₆" ¹⁄₄"
Note: Two (2) Bearings per box
69-2648 56-8108
L
Replaces Bondioli & Pavesi® Design Metric Series 8
84
9 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number41.0 1³⁹⁄₆₄" 108.0 4¹⁄₄" 3-0921
Cross and Bearing Kit: Outside Lock-Up
10 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number41.0 1³⁹⁄₆₄" 118.0 4⁵⁄₈" 3-1021
Cross and Bearing Kit: Outside Lock-Up
41.0
41.0
108.0
118.0
Replaces Bondioli & Pavesi® Design Series 9
METRIC
Replaces Bondioli & Pavesi® Design Series 10
METRIC
85
2100 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number22.0 ⁷⁄₈" 54.8 2⁵⁄₃₂" 1-1001
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
23.5 ⁵⁹⁄₆₄" 3.6 ⁹⁄₆₄" 8-2130 70-2105
Inner Profile Tube—59" Lengths(L)
55.0
22.0
L
L
O.D.
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
O.D.
23.5 ⁵⁹⁄₆₄" 79.0 3⁷⁄₆₄" 70-2105 8-2130
30.0 1³⁄₁₆" 79.0 3⁷⁄₆₄" 70-2104 8-2120
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 92.0 3⁵⁄₈" 56-0040 8-2112
1³⁄₈"-21 SPL 92.0 3⁵⁄₈" 56-0040 8-2121
Note: Tractor end use only
Replaces Walterscheid® Design Series 2100
ASAECategory 1METRIC
86
2100 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length
mm inches mm inches Hole Size Part Number
Implement Yokes
O.D.
L
L
30.0 1³⁄₁₆" 2.85 ⁷⁄₆₄" 8-2120 70-2104
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
Outer Profile Tube—59" Lengths(L)
8.0 ⁵⁄₁₆" 50.0 1³¹⁄₃₂" 50-0112
Note: Fits both inner and outer profile yokes - packaged 10 per box
25.4 1" 79.0 3⁷⁄₆₄" ⁵⁄₁₆" D.T. 8-2108
31.75 1¹⁄₄" 79.0 3⁷⁄₆₄" ³⁄₈" D.T. 8-2110
Overall Length Bell O.D. Part Number
51" 5¹⁄₄" 69-0648
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
1²¹⁄₃₂" ⁵⁄₃₂" 69-0648 56-2122
Note: Two (2) Bearings per box
L
Replaces Walterscheid® Design Metric Series 2100
87
2200 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number23.8 ¹⁵⁄₁₆" 61.3 2¹³⁄₃₂" 1-0221
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
34.5 1²³⁄₆₄" 3.95 ⁵⁄₃₂" 8-2230 70-2205
Inner Profile Tube—59" Lengths(L)
61.3
23.8
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
34.5 1²³⁄₆₄" 82.0 3¹⁵⁄₆₄" 70-2205 8-2230
41.25 1⁵⁄₈" 82.0 3¹⁵⁄₆₄" 70-2204 8-2220
O.D.
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2012
1³⁄₈"-21 SPL 97.0 3¹³⁄₁₆" 56-0040 8-2021
Note: Tractor end use only
Replaces Walterscheid® Design Series 2200
ASAECategory 2METRIC
88
2200 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
41.25 1⁵⁄₈" 2.85 ⁷⁄₆₄" 8-2220 70-2204
Outer Profile Tube—59" Lengths(L)
L
10.0 ¹³⁄₃₂" 65.0 2²³⁄₆₄" 50-2212
Note: Fits both inner and outer profile yokes - packaged 10 per box
25.4 1" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2008
31.75 1¹⁄₄" 82.0 3¹⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-2010
Overall Length Bell O.D. Part Number51" 6¹⁄₈" 69-1248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2" ⁵⁄₃₂" 69-1248 56-2223
Note: Two (2) Bearings per box
L
O.D.
Replaces Walterscheid® Design Metric Series 2200
89
I SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 70.0 2³⁄₄" 1-0321
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
34.5 1²³⁄₆₄" 3.95 ⁵⁄₃₂" 8-0130 70-2205
Inner Profile Tube—59" Lengths(L)
70.0
27.0
L
L
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
34.5 1²³⁄₆₄" 85.0 3¹¹⁄₃₂" 70-2205 8-0130
41.25 1⁵⁄₈" 85.0 3¹¹⁄₃₂" 70-2204 8-0120
O.D.
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 102.0 4¹⁄₆₄" 56-0040 8-3012
1³⁄₈"-21 SPL 102.0 4¹⁄₆₄" 56-0040 8-3021
Note: Tractor end use only
Replaces Walterscheid® Design Series I
ASAECategory 3METRIC
90
I SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
41.25 1⁵⁄₈" 2.85 ⁷⁄₆₄" 8-0120 70-2204
Outer Profile Tube—59" Lengths(L)
L
10.0 ¹³⁄₃₂" 65.0 2⁹⁄₁₆" 50-2312
Note: Fits both inner and outer profile yokes - packaged 10 per box
25.4 1" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3011
31.75 1¹⁄₄" 85.0 3¹¹⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-3010
35.0 1³⁄₈" 85.0 3¹¹⁄₃₂" — ³⁄₈" D.T. 8-3016
Overall Length Bell O.D. Part Number
51" 6¹⁄₈" 69-1248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2" ⁵⁄₃₂" 69-1248 56-2223
Note: Two (2) Bearings per box
L
O.D.
Replaces Walterscheid® Design Metric Series I
91
2300 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number27.0 1¹⁄₁₆" 74.6 2¹⁵⁄₁₆" 1-0421
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
34.5 1²³⁄₆₄" 3.95 ⁵⁄₃₂" 8-2330 70-2205
Inner Profile Tube—59" Lengths(L)
27.0
74.6
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
34.5 1²³⁄₆₄" 98.0 3⁵⁵⁄₆₄" 70-2205 8-2330
41.25 1⁵⁄₈" 98.0 3⁵⁵⁄₆₄" 70-2204 8-2320
L
L
L
O.D.
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4012
1³⁄₈"-21 SPL 109.0 4⁹⁄₃₂" 56-0040 8-4021
Note: Tractor end use only
Replaces Walterscheid® Design Series 2300
ASAECategory 3METRIC
92
2300 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
41.25 1⁵⁄₈" 2.85 ⁷⁄₆₄" 8-2320 70-2204
Outer Profile Tube—59" Lengths(L)
10.0 ¹³⁄₃₂" 65.0 2⁹⁄₁₆" 50-2312
Note: Fits both inner and outer profile yokes - packaged 10 per box
31.75 1¹⁄₄" 98.0 3⁵⁵⁄₆₄" ¹⁄₄" ³⁄₈"-16 8-4010
34.93 1³⁄₈" 98.0 3⁵⁵⁄₆₄" ⁵⁄₁₆" ³⁄₈"-16 8-4011
Overall Length Bell O.D. Part Number
51" 6¹⁄₈" 69-1248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2" ⁵⁄₃₂" 69-1248 56-2223
Note: Two (2) Bearings per box
L
O.D.
L
Replaces Walterscheid® Design Metric Series 2300
93
2400 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number32.0 1¹⁷⁄₆₄" 76.0 3" 2-2421
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
39.5 1⁹⁄₁₆" 4.5 ¹¹⁄₆₄" 8-2430 70-2405
Inner Profile Tube—59" Lengths(L)
76.0
32.0
L
L
O.D.
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
L
39.5 1⁹⁄₁₆" 96.0 3²⁵⁄₃₂" 70-2405 8-2430
48.0 1⁵⁷⁄₆₄" 96.0 3²⁵⁄₃₂" 70-2404 8-2420
O.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 112.0 4¹³⁄₃₂" 56-0040 8-2412
1³⁄₈"-21 SPL 112.0 4¹³⁄₃₂" 56-0040 8-2421
Note: Tractor end use only
Replaces Walterscheid® Design Series 2400
ASAECategory 4METRIC
94
2400 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
48.0 1⁵⁷⁄₆₄" 3.8 ⁵⁄₃₂" 8-2420 70-2404
Outer Profile Tube—59" Lengths(L)
L
10.0 ¹³⁄₃₂" 75.0 ⁶¹⁄₆₄" 50-0512
Note: Fits both inner and outer profile yokes - packaged 10 per box
31.75 1¹⁄₄" 96.0 3²⁵⁄₃₂" ¹⁄₄" ³⁄₈"-16 8-2410
34.93 1³⁄₈" 96.0 3²⁵⁄₃₂" — ¹⁄₂" D.T. 8-2411
Overall Length Bell O.D. Part Number
51" 7¹⁄₁₆" 69-2248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁄₂" ³⁄₁₆" 69-2248 56-2324
Note: Two (2) Bearings per box
L
O.D.
Replaces Walterscheid® Design Metric Series 2400
95
2500 SERIES
Bearing Diameter Overall Lengthmm inches mm inches Part Number36.0 1.417" 89.0 3¹⁄₂" 3-2521
Cross and Bearing Kit: Outside Lock-Up
Tractor Yokes: Pin Type Quick Disconnect
89.0
36.0
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Inner Profile Yoke
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
51.0 2" — — 8-2530 70-2505
Inner Profile Tube—59" Lengths(L)
L
(L)Bore Length Use W/Tube
mm inches mm inches Part Number Part Number
Outer Profile Yoke
51.0 2" 105.0 4¹⁄₈" 70-2505 8-2530
61.0 2¹³⁄₃₂" 105.0 4¹⁄₈" 70-2504 8-2520
LO.D.
LO.D.
LO.D.
(L)Length QD
Bore mm inches Pin Kit Part Number1³⁄₈"-6 SPL 122.0 4¹³⁄₁₆" 56-0040 8-2512
1³⁄₈"-21 SPL 122.0 4¹³⁄₁₆" 56-0040 8-2521
1³⁄₄"-20 SPL 122.0 4¹³⁄₁₆" 56-0940 8-2514
Note: Tractor end use only
Replaces Walterscheid® Design Series 2500
ASAECategory 5METRIC
96
2500 SERIES
(L)Diameter Length
mm inches mm inches Part Number
Tube Pin
(L)Bore Length Hole
mm inches mm inches Keyway Size Part Number
Implement Yokes
L
L
(L)Bore Length
mm inches mm inches Drill Thru Part Number
Shear Pin Yokes
O.D. Wall Thickness Use W/Yoke Partmm inches mm inches Part Number Number
61.0 2¹³⁄₃₂" 4.5 ¹¹⁄₆₄" 8-2520 70-2504
Outer Profile Tube—59" Lengths(L)
10.0 ¹³⁄₃₂" 90.0 3¹⁄₂" 50-1090
Note: Fits both inner and outer profile yokes - packaged 10 per box
34.93 1³⁄₈" 105.0 4¹⁄₈" ³⁄₈" ³⁄₈"-16 8-2511
38.1 1¹⁄₂" 105.0 4¹⁄₈" ³⁄₈" ³⁄₈"-16 8-2515
35.0 1³⁄₈" 105.0 4¹⁄₈" ¹⁄₂" D.T. 8-2525
38.1 1¹⁄₂" 105.0 4¹⁄₈" ¹⁄₂" D.T. 8-2535
Overall Length Bell O.D. Part Number
51" 8" 69-2248
Shield Bearings are not included
World ShieldTM Plastic
Shield BearingBearing Use W/Shield
Bearing I.D. Width Part Number Part Number
2¹⁄₂" ³⁄₁₆" 69-2248 56-2324
Note: Two (2) Bearings per box
L
L
O.D.
LO.D.
Replaces Walterscheid® Design Metric Series 2500
97
AUXILIARY POWER TAKE-OFFDRIVESHAFTS AND COMPONENTS
ForTruck Mounted and Industrial
Applications
98
GENERAL SAFETY INFORMATION
To prevent injury to yourself and/or damage to theequipment:
➤ Read all owner’s manuals, service manuals,and/or other instructions
➤ Always follow proper procedures and useproper tools and safety equipment
➤ Be sure to receive proper training
➤ Never work alone while under a vehicle orwhile repairing or maintaining equipment
➤ Always use proper components inapplications for which they are approved
➤ Be sure to assemble components properly
➤ Never use worn-out or damaged components
➤ Always block any raised or moving device that mayinjure a person working on or under a vehicle
➤ Never operate the controls of the power take-off orother driven equipment from any position that couldresult in getting caught in the moving machinery
➤ Rotating auxiliary driveshafts are dangerous. Youcan snag clothes, skin, hair, hands, etc. This cancause serious injury or death.
➤ Do not go under vehicle when the engine isrunning.
➤ Do not work on or near an exposed shaft when theengine is running.
➤ Shut off engine before working on power take-off ordriven equipment.
➤ Exposed rotating driveshafts must be guarded.
�! WARNING: ROTATING AUXILIARYDRIVESHAFTS
Auxiliary driveshafts may be installed with eitherrecessed or protruding set screws. If you choose asquare head set screw, you should be aware that it willprotrude above the hub of the yoke and may be a pointwhere clothes, skin, hair, hands, etc. could besnagged. A socket head set screw, which may notprotrude above the hub of the yoke, does not permitthe same amount of torquing as does a square headset screw. Also, a square head set screw, if used witha lock wire, will prevent loosening of the screw causedby vibration. Regardless of the choice made withrespect to a set screw, an exposed rotating auxiliarydriveshaft must be guarded.
If an auxiliary driveshaft is used and remains exposedafter installation, it is the responsibility of the vehicledesigner and P.T.O. installer to install a guard.Auxiliary Power Take-Off Safety shielding systems areavailable in this catalog. Shields must be used if thedriveshaft is not covered in its location.
�! WARNING: GUARDING AUXILIARYDRIVESHAFTS �! WARNING: USING SET SCREWS
This symbol warns of possible personal injury�!
SAFETY INFORMATION
1©2001 Neapco Inc.
AUXILIARY POWER TAKE-OFF TECHNICAL INFORMATION
POWER-TAKE-OFF (P.T.O.) BASICS
An auxiliary power-take-off shaft transmits power from the source to the driven accessory. Theshaft must be capable of transmitting the peak torque and maximum R.P.M. required by theaccessory, while withstanding any shock loads. The information in this publication is focused onN1000 and N1310 series auxiliary power-take-off products.
An auxiliary power shaft operates through constantly changing angles between the powersource and the driven accessory. Chassis twisting and power train deflections due to torquecontribute to these changes in operating angles. This deflection also will cause changes in thelength of the auxiliary power shaft. Including a slip member (slip yoke and spline stub shaft) inthe driveline system accommodates this.
Joint operating angles are very important considerations in the configuration of an auxiliarypower-take-off application. The service life of the universal joint is directly affected by theoperating angles experienced in the completed system. Guidelines for permissible operatingangles are identified in the accompanying chart.
SPECIFYING SHAFT TYPE
Applications in auxiliary PTO use either solid shafting or tubular driveshaft assemblies.
Neapco tubular auxiliary PTO shaft kits are manufactured using 2” diameter by .083” wall(2” x .083) tubing. These unwelded assemblies are convenient for fabricating different lengthdriveshaft requirements as needed. Neapco recommends using tubular auxiliary PTO shaftswhenever possible. Neapco tubular shafts are designed to reduce vibration as a dynamicallybalanced assembly. Minimizing vibration increases the service life of the driveshaft, universaljoints, bearings in the driving and driven units and helps keep end connections secure.
Solid shafting should only be used in auxiliary power-take-off applications designed for 1,000R.P.M. or less intermittent service.
INSTALLING A P.T.O. DRIVELINE
When installing a remote-mount PTO, one requiring a propeller shaft (driveline), please observethat there is a slight angle of inclination to the engine, and that you must install the driven shaftof the pump parallel to the PTO output shaft. In addition, the yokes of the PTO driveshaft shouldbe in line, in phase, and in the same plane.
UNIVERSAL JOINT OPERATING ANGLES
SHAFT RPM MAXIMUM NORMAL SHAFT RPM MAXIMUM NORMALOPERATING ANGLE OPERATING ANGLE
500 17° 2500 7°1000 17° 3000 6°1500 11° 3500 5°2000 8° 4000 4°
2 ©2001 Neapco Inc.
AUXILIARY POWER TAKE-OFF TECHNICAL INFORMATION
Some light-duty under body hoist applications use a pump and tank combination, and thereare many large tank trucks which have pneumatic blowers. Both require a level horizontalinstallation, making parallel input and output shafts difficult to configure. The correct remedyfor this common driveline problem is to use a two-piece driveshaft. In close-coupled applica-tions a center yoke assembly may be necessary to provide correct phasing and angularity.
To properly measure the driveline angle, use an inclinometer, or bubble protractor to deter-mine TRUE JOINT ANGLE, which is a composite of vertical and horizontal components. Thiscan also be calculated by measuring and using trigonometry. We recommend that you installwith at least a two-degree angle, to insure that oscillations will properly rotate the needlebearings in the u-joints.
If a long driveshaft is necessary then critical speed problems must be taken into consideration.The solution is to use more than one driveshaft, installed with center support bearing assem-blies, and design the driveshaft lengths to avoid critical and half-critical speeds. Usually thebest solution is to install 60% of the driveline closest to the source of power, or the driving end,with the remaining 40% toward the driven end. Pillow blocks, flange bearings or hanger bear-ings used in two-piece driveshafts must be mounted solidly to the chassis.
WHERE TO INSTALL THE SLIP JOINTS
The purpose of the slip joint (slip yoke and spline stub shaft) is to allow proper flexing of theuniversal joints as they rotate through the entire circle of operation. If a slip joint is not installed,or if it is corroded from lack of lubricant, then severe stresses are imposed upon the bearingsand seals in the PTO and pump. An additional purpose of the slip joint is to allow flexing of thechassis without putting lateral loads on the bearings and seals. Bearing and seal damage inPTOs and pumps, and overheating is nearly always attributable to driveline problems.
Our recommendation is that if you have enough space, the slip joint should be installed onthe end closest to the PTO. If the PTO is inadvertently left in gear, the slip joint may leavethe shaft during overspeeding, or operating above critical speed. The shorter shaft is lesslikely to destroy the entire underside of the vehicle.
CAUSES OF DRIVELINE FAILURES
To review u-joint and driveline problems, most failures will be a result of one or more of thefollowing:
· TOO MUCH TORQUE OR HP REQUIREMENT· LACK OF LUBRICANT OR DIRTY LUBRICANT· HIGH DEGREE OF ANGULARITY· U-JOINTS NOT IN PHASE· U-JOINTS NOT PARALLEL· DRIVELINE NOT ALLOWED TO SLIP· DRIVELINE OUT OF BALANCE
If you must use a driveline, it is our recommendation that you use tubular assemblies, and thatyou purchase from a certified driveline specialist.
3©2001 Neapco Inc.
DIRECTION OF ROTATION
NEAPCO AUXILIARY P.T.O. DRIVESHAFT SHIELDING SYSTEM
Neapco, Inc. has developed an Auxiliary P.T.O. Driveshaft shield System that iscompatible with many 1000 and 1310 Series power-take-off applications. The system consistsof four (4) basic components that combine to form a total driveline enclosure system.
1) A series of Bearing Races (collars) for installation on the driveshaft assembly by tackwelding.
2) Flex Bell™ Yoke Enclosures with over 8” of coverage featuring fluted construction for easylength adjustment by cutting, providing custom installations.
3) Inner (2.75” O.D.) and Outer (3.00” O.D.) Telescoping Plastic Shield Tubes complete withbearing slots (4) and Danger Label. Designed for easy length adjustment by cutting todesired length with bearing slots aligned with bearing races (collars) mounted on thedriveshaft. These shields must overlap (telescope) at least 5” or more, if design allows. Toaccomplish this the shield tube should be cut at least 2 1/2” past the center of the driveshaftwith the bearing slots aligned with the bearing race (collars) on the driveshaft.
4) Inner (4) and Outer (4) Shield Bearing Sets. These bearing sets lock the Flex Bell™ YokeEnclosure to the mating shield tube through the aligned slots and ride in the bearing raceson the driveshaft collars.
Assembly is easily accomplished after a short orientation to the system. Disassembly (forservice work or lubrication) takes only a few minutes with a blade screwdriver.
Shield Bearings must be installed properly in regards to the rotation of the driveline. This pre-vents the Shield Bearings from loosening or popping out of the Bearing slots.
102
Consists of:1) FB-275-SP Bell4) FN-275 Shield Bearing
Consists of:1) FB-300-SP Bell4) FN-300 Shield Bearing
FB-275-SP Replacement Bell Kit FB-300-SP Replacement Bell Kit
FB-300-SP FN-300-4
PT-3.00-60.00
2294-4
PT-2.75-60.00
FN-275-4 FB-275-SP
68-0275 68-0300
FB-N1000 Shield Kit
68-1000
3.00 2.75
10.22
8.28
4.00 5.00
3.25 3.00
10.22
8.22
4.00
5.00
FN-275-4 FN-300-4
Consists of:1) FB-275-SP Bell1) FB-300-SP Bell1) PT-2.75-60.00" Inner Shield Tube1) PT-3.00-60.00" Outer Shield Tube4) FN-275 Shield Bearing4) FN-300 shield Bearing1) 2294-4 Shield Support Bearing1) FBIS-99.6 Instruction Sheet
AUXILIARY P.T.O. DRIVESHAFT SHIELDING SYSTEM
103
N10270-SF
N10271-SF
7.48 COLLAPSED
YOKE & STUB SHAFT ASSEMBLY
59.91
YOKE & TUBE ASSEMBLY
10-0699Midship Stub Shaft 1" DiameterMidship Stub w/ 1/4" Key for2" X 0.83 Tubing
Unwelded Driveshaft AssemblyN1000 Series w/ 2" Tubing
Unwelded Driveshaft MidshipApplication N1000 Series w/ 2" Tubing
10-0493YOKE
.25 KEYWAY
1.00
.50 2.50
10-0699STUB SHAFT
5.13
5.88 59.91
11-5914 YOKE &TUBE ASSEMBLY
.252
.852
.998
2.13FULL KEYWAY
4.13
5.13
5.88
2.25 BAR STOCK
Mounting Collars
2.25
.59 A
1.0101.000
1.1351.125
1.2801.270
1.6151.605
1.7701.760
1.9051.895
2.0302.020
2-1000
2-1125
2-1250
2-1625*
2-1750
2-1880**
2-2030
BOXEDPART NUMBERA
* Fits N10-0318
** Fits N2-3-128KX
AUXILIARY P.T.O. DRIVESHAFT SHIELDING SYSTEM
104
DangerRotating Driveline
Applicable safety standards require awarning label be affixed to the outer sectionof the driveline safety shield, to remind theoperator that it should not be in operationuntil the following conditions have beenmet.
1. All Driveline, and Equipment Shieldsare in place
2. The Driveline is properly and securelyattached at both ends.
3. The Driveline Shields turn freely. Anydeviation from this standard could resultin a serious injury or death.
The label, part number NA-7232, shouldbe affixed to the outer shield with the topone (1") inch from the bell as shown in thediagram below.
Note: Applicable safety standardsrequire that all drivelines beshielded with legible label in place.When maintaining and repairingAuxiliary PTO drivelines, use thedesignated label part numbers topurchase replacements.
SAFETY INFORMATION
SAFETY INFORMATION
READ CAREFULLY and ADHERE TO
Part NumberNA-7232
104
Flex Bells™ should be cut tolength that will provide completecoverage of end yoke connection
105
DangerGuard Missing
DO NOT OPERATEApplicable safety standards require theuse of warning labels on the driveshaftwhen the safety shields have beenremoved. We recommend that label partnumber NA-10666 be adhered to the tubeend of the driveshaft, one (1") inch from theedge of the yoke, with the side of the labeltoward the yoke. (See diagram below) Atthis point, the label will be readily visible atall times.
Serious injury or even death can result byoperating equipment without the propersafety shield in place. DO NOT operateyour equipment without safety shields beinginstalled on the driveshaft.
Note: A high percentage of alldriveline injuries occur when safetyshielding is missing or notfunctional. It is necessary for theuser to maintain proper shieldingand safety labels on the drivelines.
SAFETY INFORMATION
SAFETY INFORMATION
READ CAREFULLY and ADHERE TO
Part NumberNA-10666
105
106
C DCenterline Set Screw
Square to End Hub Distance to End YokeBore of Hub Diameter Hole Size Location End of Hub Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
.750 2.500 1.625 .375-16 GAP .500 10-0422
.875 1.688 1.625 .375-16 EAR .438 10-1707
.875 2.500 1.625 .375-16 GAP .625 10-04121.000 2.500 2.250 .375-16 GAP .625 10-0452
replaces Spicer® 10-4-52
C DCenterline Set Screw
Hexagon to End Hub Distance to End YokeBore of Hub Diameter Hole Size Location End of Hub Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
.875 2.500 2.250 .375-16 GAP .625 10-4282replaces Spicer® 10-4-282
1.125 2.500 2.250 .375-16 GAP .500 10-0432replaces Spicer® 10-4-32
A L
B
D C
C DCenterline Set Screw
Rectangular to End Hub Distance to End YokeBore of Hub Diameter Hole Size Location End of Hub Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
1.000X1.125 2.500 2.250 — — — N10-1559
A L
B
D C
C
A L
B
D
C
END YOKESInside Snap Ring
107
C DSet Screw
Centerline DistanceRound to End Hub Keyway to End End YokeBore of Hub Diameter Width Location Hole Size Location of Hub Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
.625 1.688 1.625 .188 GAP .37516 EAR .438 10-1708
.625 2.500 1.625 .188 GAP .375-16 EAR .500 N10-4373
.750 1.688 1.625 .188 GAP .375-16 EAR .438 10-1700
.750 2.500 1.625 .250 GAP .375-16 GAP .500 10-0423replaces Spicer® 10-4-23
.750 2.500 1.625 .188 GAP (2).375-16 EAR .500 10-4133replaces Spicer® 10-4-133
.750 2.500 1.625 .188 GAP .375-16 GAP .500 10-0413replaces Spicer® 10-4-13
.812 1.688 1.625 .250 GAP .375-16 EAR .438 10-1702
.812 2.500 1.625 .188 GAP .375-16 GAP .500 10-0433replaces Spicer® 10-4-33
.812 2.500 1.625 .250 GAP .375-16 EAR .500 10-4173replaces Spicer® 10-4-173
.812 2.500 1.625 .250 GAP .375-16 GAP .500 10-0443replaces Spicer® 10-4-43
.875 1.688 1.625 .250 EAR .375-16 GAP .438 10-4703replaces Spicer® 10-4-703
.875 2.500 1.625 .250 GAP .375-16 EAR .500 10-4453replaces Spicer® 10-4-453
.875 2.500 1.625 .188 GAP .375-16 GAP .500 10-0453replaces Spicer® 10-4-53
.875 2.500 1.625 .250 GAP .375-16 GAP .500 10-0463replaces Spicer® 10-4-63
.938 2.500 1.625 .250 EAR .375-16 EAR .500 10-0473replaces Spicer® 10-4-73
1.000 1.688 1.625 .250 GAP .375-16 EAR .438 10-17051.000 2.500 1.625 .250 GAP .375-16 EAR .500 10-4573
replaces Spicer® 10-4-5731.000 2.500 1.625 .250 GAP .375-16 GAP .500 10-0493
replaces Spicer® 10-4-931.000 2.500 1.625 .188 GAP .375-16 GAP .500 10-0483
replaces Spicer® 10-4-83
A L
B
D
C
END YOKESInside Snap Ring
108
C DSet Screw
Centerline DistanceRound to End Hub Keyway to End End YokeBore of Hub Diameter Width Location Hole Size Location of Hub Part Number
A L
B
D
C
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
1.000 2.500 1.625 — — (2).375DT EAR .500 10-4443replaces Spicer® 10-4-443
1.063 2.500 2.250 .250 GAP .375-16 EAR .500 N10-41631.125 2.500 2.250 .312 GAP .375-16 GAP .500 10-44731.125 2.500 2.250 .250 GAP .375-16 EAR .500 10-4143
replaces Spicer® 10-4-1431.125 2.500 2.250 .312 GAP .375-16 GAP .500 10-4113
replaces Spicer® 10-4-1131.125 2.500 2.250 .250 GAP .375-16 EAR .500 10-4103
replaces Spicer® 10-4-1031.188 2.500 2.250 .312 GAP .375-16 EAR .500 N10-41531.188 2.500 2.250 .250/.312 GAP .375-16 EAR .500 10-15741.250 2.500 2.250 .312 GAP .375-16 EAR .500 10-4193
replaces Spicer® 10-4-1931.250 2.500 2.250 .312 GAP .375-16 GAP .500 10-4123
replaces Spicer® 10-4-1231.250 2.500 2.250 — — (2).375-16 EAR .500 10-43631.250 2.500 2.250 .250 GAP .375-16 EAR .500 10-4183
replaces Spicer® 10-4-1831.375 2.500 2.000 .312 GAP .375-16 EAR .500 N10-42931.500 2.500 2.000 — — .281 EAR .500 N10-1532
END YOKESInside Snap Ring
109
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® No. 5-170X)
.875 - 13 Involute Spline.878/.875 .758/.753 1.625 2.500 2.030 .375-16 EAR .500 10-4481
replaces Spicer® 10-4-481
1.125 - 6 Spline1.125/1.124 .956/.955 1.625 2.500 2.030 .330DT EAR .375 N10-0411
1.375 - 6 Spline1.375/1.374 1.169/1.167 2.000 2.500 2.030 .330DT EAR .375 N10-04311.377/1.374 1.173/1.168 3.562 3.500 3.030 — — — 10-4137
Implement end trailing pin quick disconnect1.377/1.374 1.173/1.168 3.562 3.500 3.030 — — — 10-4139
Tractor end trailing pin quick disconnect
Spline Data D CE F Bottom of Set Screw or Drill Thru
Major Minor Centerline Crosshole DistanceDiameter Diameter Hub to End to End Hole to End End YokeMax/Min Max/Min Diameter of Spline of Spline Size Location of Hub Part Number
A L
B
D
C
F
E
END YOKESInside Snap Ring
110
F E C DCenterline
Round Keyway Set Screw Hub Length Thru to End Joint End YokeBore Width Thread Diameter Bore of Hub Angle Part Number
N1310 Series use Kit No. 1-0153 A-3.469 B-1.062 (Replaces Spicer® 5-153X)
.750 Bore Blank 2.000 1.625 2.563 17O N2-4-177
.875 .250 .375-16 UNC 2.000 1.625 2.563 17O N2-4-5831.000 .250 .375-16 UNC 2.000 1.625 2.563 17O N2-4-4731.125 .250 .375-16 UNC 2.000 1.625 2.563 17O N2-4-5031.250 .312 .375-16 UNC 2.000 1.625 2.563 17O N2-4-5331.250 Bore Blank 2.000 1.625 2.563 17O N2-4-533-11.375 .375 .375-16 UNC 2.000 1.625 2.563 17O N2-4-8031.375 Bore Blank 2.000 1.625 2.563 17O N2-4-803-1
A
B
D
C
E
F
END YOKESOutside Snap Ring
111
Spline Data G C DE F
Major Minor Ground CenterlineDiameter Diameter Set Screw Hub Length Thru to End Joint End YokeMax/Min Max/Min Thread Diameter Bore of Hub Angle Part Number
N1310 Series use Kit No. 1-0153 A-3.469 B-1.062 (Replaces Spicer® No. 5-153X)
.875 - 13 Involute Spline.878/.875 .758/.753 .375-16UNC 2.125 1.562 2.562 17O N2-4-3331
D
C F
E
B
A G
1.000 - 15 Involute Spline1.026 .875 — 2.000 1.265 2.313 17O N2-4-4921
END YOKES with SPLINED BOREOutside Snap Ring
112
C D E KCircle
Flange Diameteror or Number of Pilot Diameter Flange Face
Swing Bolt Bolt Bolt M—Male Joint to Flange YokeDiameter Pattern Size Holes F—Female Angle Centerline Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
3.500 2.750 .344 4 M-2.250 — 1.690 10-1022replaces Spicer® 10-2-29
A L
B
K
E
CD
FLANGE YOKESInside Snap Ring
113
C D E KCircle
Flange Diameteror or Number of Pilot Diameter Flange Face
Swing Bolt Bolt Bolt M—Male Joint to Flange YokeDiameter Pattern Size Holes F—Female Angle Centerline Part Number
B
E
D C
A
K
N1310 Series use Kit No. 1-0153 A-3.469 B-1.062 (Replaces Spicer® 5-153X)
3.600 2.750 8mm 4 M-2.250 15O 1.625 N2-2-899-1(.315) fits Datsun applications
3.625 2.875 .375 4 M-3.625 20O 1.375 N2-2-3493.875 3.125 .375 4 M-2.375 20O 1.375 N2-2-3294.250 3.125 .375 4 M-2.375 30O 1.625 N2-2-459
4.625 3.750 .438 4 M-2.750 20O 1.375 N2-2-479fits 1350 Series Flange
4.750 3.500 .500 4 F-2.000 20O 1.625 N2-2-9395.875 4.750 .500 4 M-3.750 20O 1.375 N2-2-579
fits 1310/1480 Series Conversion Flange
FLANGE YOKESOutside Snap Ring
114
C DCenterline Lube Fitting Slip Yoke
Rectangular to End Distance to AssemblyBore of Hub Location End of Hub Part Number Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500(Replaces Spicer® 5-170X)
.750X.875 5.500 GAP 1.750 0641-B N10-1769
A L
B
D
C
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500(Replaces Spicer® 5-170X)
.875 5.500 GAP 1.750 0641-B 10-3162replaces Spicer® 10-3-162X
1.125 5.500 GAP 1.750 0641-B 10-0332replaces Spicer® 10-3-32X
A L
B
D
C
C
C DCenterline Lube Fitting Slip Yoke
Hexagon to End Distance to AssemblyBore of Hub Location End of Hub Part Number Part Number
SLIP YOKE ASSEMBLIESInside Snap Ring
115
C DCenterline Lube Fitting Slip Yoke
Round to End Keyway Distance to AssemblyBore of Hub Location Width Location End of Hub Part Number Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
.750 5.500 GAP .188 GAP 1.750 0641-B N10-0313X
.813 5.500 GAP .250 GAP 1.750 0641-B 10-0323replaces Spicer® 10-3-23X
.875 5.500 GAP .250 GAP 1.750 0641-B 10-0333replaces Spicer® 10-3-33X
1.000 5.500 GAP .250 GAP 1.750 0641-B 10-0383replaces Spicer® 10-3-83X
1.125 5.500 GAP .312 GAP 1.750 0641-B 10-3183replaces Spicer® 10-3-183X
1.125 5.500 GAP .250 GAP 1.750 0641-B N10-17671.250 5.500 GAP .312 GAP 1.750 0641-B 10-3163
replaces Spicer® 10-3-163X
A L
B
D
C
C DCenterline Lube Fitting Slip Yoke
Square to End Distance to AssemblyBore of Hub Location End of Hub Part Number Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500(Replaces Spicer® 5-170X)
.750 5.500 GAP 1.750 0641-B 10-0312replaces Spicer® 10-3-12X
.875 5.500 GAP 1.750 0641-B 10-0322replaces Spicer® 10-3-22X
1.000 5.500 GAP 1.750 0641-B 10-3122replaces Spicer® 10-3-122X
L
B
A
D
C
SLIP YOKE ASSEMBLIESInside Snap Ring
116
Spline Data G CE F W
Major Minor Space Centerline Centerline Slip YokeDiameter Diameter Width to End to Face Joint Lube Dust AssemblyMax/Min Max/Min Max/Min of Spline of Washer Angle Fitting Cap Part Number
N1000 Series use Kit No. 1-0170 A-2.312 B-.938 L-1.500 (Replaces Spicer® 5-170X)
1.125 - 10 Spline1.125/1.124 .938/.937 .176/.174 5.500 1.470 — 0641-B — 10-0381
replaces Spicer® 10-3-81X1.125/1.124 .938/.937 .176/.174 5.500 1.470 — 0641-B 11-1075
includes metal washer and cork seal
1.250 - 6 Spline1.251/1.249 1.065/1.062 .313/.311 5.500 1.470 — 0641-B — N10-1765
1.250 - 16 Spline1.250/1.249 1.062/1.057 .115/.114 5.500 1.470 — 0641-B 280196 N10-0318
A L
B
CG
FE
W
SLIP YOKE ASSEMBLIESInside Snap Ring
117
Spline Data G CE F W
Major Minor Space Centerline Centerline Slip YokeDiameter Diameter Width to End to Face Joint Lube Dust AssemblyMax/Min Max/Min Max/Min of Spline of Washer Angle Fitting Cap Part Number
N1310 Series use Kit No. 1-0153 A-3.469 B-1.062 (Replaces Spicer® 5-153X)
1.250 - 16 Spline1.250/1.249 1.062/1.057 .115/.114 6.562 1.430 30O 0641-B ND2K N2-3-4441KX
1.375 - 16 Spline1.375/1.374 1.187/1.182 .135/.133 5.375 1.050 15O 0641-B 280194 N2-3-128KX1.375/1.374 1.187/1.182 .135/.133 6.000 1.050 20O 0641-B 280195 N2-3-4951KX1.375/1.374 1.187/1.182 .135/.133 6.000 1.050 20O 0641-B 280194 N2-3-7981KX1.375/1.374 1.187/1.182 .135/.133 6.875 1.530 30O 0641-B 280195 N2-3-5221KX1.375/1.374 1.187/1.182 .135/.133 6.875 1.530 30O 0641-B 280194 N2-3-8001KX1.375/1.374 1.187/1.182 .135/.133 7.875 1.530 30O 0641-B 280195 N2-3-5821KX1.375/1.374 1.187/1.182 .135/.133 7.875 1.530 30O 0641-B 280194 N2-3-8021KX
B
CG E
F
W
A
SLIP YOKE ASSEMBLIESOutside Snap Ring
118
Sub Assemblies Components1 6 2 3 4 5
Yoke &Stub Shaft, Yoke & Tube,
Cross & Cross &Bearing Kit Bearing Kit Slip Yoke Cross & CompleteAssembly Assembly Assembly Stub Shaft Bearing Kit Tube Yoke Driveshaft
Part Part Part Part Part Part PartSeries Number Number Number Number Number Tube Size Number Number
N1000 N10-18-1741 11-5914 10-0318 N2-40-1741 1-0170 2.000X.083 10-1005 N10270-SF
DRIVESHAFT COMPONENTPart Numbers
A B C DComplete
Max. Ext. Compressed Yoke & Tube Yoke & Stub Shaft Assembly DriveshaftSeries Length Length Tube Size Length Min. Length Max. Length Part NumberN1000 69.39 10.00 2.000X.083 59.91 7.48 9.48 N10270-SF
61
2 3B/4 5
D
A
C
N1000 SERIES AUXILIARYPOWER TAKE-OFF
Unwelded Driveshaft Assembly
119
A B C DComplete
Max. Ext. Compressed Yoke & Tube Yoke & Stub Shaft Assembly DriveshaftSeries Length Length Tube Size Length Min. Length Max. Length Part NumberN1310 55.75 9.50 2.000X.083 49.44 6.25 8.25 N9553-SF
Components1 2 3 4
Slip Yoke Cross & CompleteAssembly Stub Shaft Bearing Kit Tube Yoke Driveshaft
Part Part Part Part PartSeries Number Number Number Tube Size Number Number
DRIVESHAFT COMPONENTPart Numbers
N1310 N2-3-128KX N2-40-1031 1-0153 2.000X.083 N2-28-357 N9553-SF
1 2 4B / 3
C
A
D
N1310 SERIES AUXILIARYPOWER TAKE-OFF
Unwelded Driveshaft Assembly
120
1.375-16 Spline 24.000 2.500 280194 1.375 N2-4-803-1 N2-40-138-2without Dura-Slip® on spline
A C FOverall Length of Mating Butt Mating
Spline data Length Spline Dust Cap Diameter End Yoke Part Number
Welded Application
A
C
F
SLIP STUB SHAFTSfor auxiliary Power Take-off
A B C DSlip YokeAssembly Stub Shaft Cross & Bearing Kit End Yoke Driveshaft Kit
Series Part Number Part Number Part Number Part Number Part NumberN1310 N2-3-7981KX N2-40-138-2 1-0153 N2-4-803-1 N91382-SF
* Used primarily in crank driven front mount hydraulic pump applications.Also suitable for clutch connection drives.Maximum operating speed—2800 R.P.M.(Not recommended for vehicular propeller shaft applications.)
DRIVESHAFT COMPONENTPart Numbers
DC B CA
N1310 SERIES AUXILIARYPOWER TAKE-OFF KIT
for Close Coupled applications*(Assembly and Welding required)
121
S E R I E S
SLFSF
SF - Standard FlangeSLF - Special Large Flange
KeywayBore Width/Depth N1310 N1350-N1410 N1480-N1550 N1610 N1710 N1810
Std. Rough Bore N2-1-1313 N3-1-1013 N4-1-1133 N5-1-873 N6-1-1253 N6.5-1-533
1.000 .250 X .125 N2-1-1313-1 N3-1-1013-1
1.125 .250 X .125 N2-1-1313-2 N3-1-1013-2
1.250 .250 X .125 N2-1-1313-3 N3-1-1013-3
1.250 .313 X .156 N2-1-1313-4 N3-1-1013-4
1.375 .313 X .156 N2-1-1313-5 N3-1-1013-5
1.375 .375 X .188 N2-1-1313-6 N3-1-1013-6
1.438 .375 X .188 N2-1-1313-7 N3-1-1013-7
1.500 .375 X .188 N2-1-1313-8 N3-1-1013-8 N4-1-1133-1
1.625 .375 X .188 N2-1-1313-9 N3-1-1013-9 N4-1-1133-2
1.750 .375 X .188 N2-1-1323-1 N3-1-1013-10 N4-1-1133-3
1.875 .375 X .188 N2-1-1323-2 N3-1-1013-11 N4-1-1133-4
1.875 .500 X .250 N2-1-1323-3 N3-1-1013-12 N4-1-1133-5
2.000 .500 X .250 N2-1-1323-4 N3-1-1023-1 N4-1-1133-6 N5-1-873-1 N6-1-1253-9
2.125 .500 X .250 N2-1-1323-5 N3-1-1023-2 N4-1-1133-7 N5-1-873-2 N6-1-1253-10
2.250 .500 X .250 N2-1-1323-8 N3-1-1023-10 N4-1-1133-13
2.250 .625 X .313 N2-1-1323-6 N3-1-1023-3 N4-1-1133-8 N5-1-873-3 N6-1-1253-11
2.375 .625 X .313 N2-1-1323-7 N3-1-1023-4 N4-1-1133-9 N5-1-873-4 N6-1-1253-12
2.438 .625 X .313 N3-1-1023-5 N4-1-1133-10 N5-1-873-5 N6-1-1253-1 N6.5-1-533-1
2.500 .625 X .313 N3-1-1023-6 N4-1-1143-1 N5-1-873-6 N6-1-1253-2 N6.5-1-533-2
2.750 .625 X .313 N3-1-1023-7 N4-1-1143-2 N5-1-873-7 N6-1-1253-3 N6.5-1-533-3
2.938 .750 X .375 N4-1-1143-3 N5-1-873-8 N6-1-1253-4 N6.5-1-533-4
3.000 .750 X .375 N4-1-1143-4 N5-1-873-9 N6-1-1253-5 N6.5-1-533-5
3.500 .875 X .438 N4-1-1143-5 N5-1-883-1 N6-1-1253-6 N6.5-1-533-6
3.938 1.00 X .500 N5-1-883-2 N6-1-1253-7 N6.5-1-533-7
4.000 1.00 X .500 N5-1-883-3 N6-1-1253-8 N6.5-1-533-8
Large Rough Bore N2-1-1323 N3-1-1023 N4-1-1143 N5-1-883 N6-1-1263 N6.5-1-543
Standard FlangeRough Bore Diameter .750 1.000 1.250 1.250 1.250 1.250Max. Bore and Kw. 1.688 X .375 1.875 X .500 2.438 X .625 3.00 X .750 4.00 X 1.00 4.00 X 1.00
Special Large FlangeRough Bore Diameter 1.375 1.750 2.375 3.00 3.500 3.500Max. Bore and Kw. 2.375 X .625 3.00 X .750 3.750 X 1.00 4.500 X 1.00 5.500 X 1.250 5.500 X 1.250
Bore
OAL
EBC
OD
Tapped
KeywayDrilled
TappedKeyway
Bore
Tapped
OAL
E
ODBC
Companion Flange
122
S E R I E S
SLFSF
N1310 N1350-N1410 N1480-N1550 N1610 N1710 N1810
NO. OF BOLTS 4 4 4 8 8 12
THREAD SIZE ³⁄₈-24 ⁷⁄₁₆-20 ¹⁄₂-20 ³⁄₈-24 ³⁄₈-24 ⁷⁄₁₆-20
BOLT CIRCLE 3.12 3.75 4.75 6.12 7.25 7.25
E PILOT DIA. 2.375 2.750 3.750 6.625 7.750 7.750
O.D. 3.88 4.56 5.88 6.88 8.00 8.00
O.A.L. SF 2.00 2.00 2.50 3.50 4.00 4.00
SLF 2.50 3.00 3.50 5.00 6.00 6.00
BORE DIA. SF 1.69 1.88 2.44 3.12 4.00 4.00
(MAX.) SLF 2.38 2.75 3.75 4.50 5.50 5.50
BORE DIA. SF 0.75 1.00 1.25 1.25 1.25 1.25
(ROUGH) SLF 1.38 1.75 2.38 3.12 3.50 3.50
KEYWAY SF ³⁄₈ X ³⁄₁₆ ¹⁄₂ X ¹⁄₄ ⁵⁄₈ X ⁵⁄₁₆ ³⁄₄ X ³⁄₈ 1 X ¹⁄₂ 1 X ¹⁄₂
(MAX.) SLF ³⁄₈ X ³⁄₁₆ ³⁄₄ X ³⁄₈ ⁷⁄₈ X ⁷⁄₁₆ 1¹⁄₈ X ⁹⁄₁₆ 1¹⁄₄ X ⁵⁄₈ 1¹⁄₄ X ⁵⁄₈
Bore
OAL
EBC
OD
Tapped
KeywayDrilled
TappedKeyway
Bore
Tapped
OAL
E
ODBC
Companion Flanges—Specifications
Notes
123
Shaft Size Part Number
⁷⁄₈" 76-0013
1" 76-0015
1¹⁄₈" 76-0017
1³⁄₁₆" 76-0018
1¹⁄₄" 76-0019
Shaft Size Part Number
³⁄₄" 78-0011
¹³⁄₁₆" 78-0012
¹⁵⁄₁₆" 78-0014
1¹⁄₈" 78-0017
1³⁄₁₆" 78-0018
1¹⁄₄" 78-0019
TypeDiameter Length Head Point Part Number
³⁄₈"-16 ¹⁄₂" Allen Cup 50-2501
³⁄₈"-16 ³⁄₄" Square Cup 50-2502
¹⁄₄"-20 ¹⁄₂" Allen Cup 50-2503
³⁄₈"-16 .750 Square Drilled — 50-0449for Lock Wire
* Packaged 25 per Box
Set Screws*
Hanger Bearings: Plain Bearing
Pillow Block Bearings: Plain Bearing
MISCELLANEOUS PTO PARTS
124
WoodruffWidth Length Number Part Number
³⁄₁₆" 1" 13 50-1504
¹⁄₄" 1" 15 50-1505
⁵⁄₁₆" 1" B 50-1506
* Packaged 25 per Box
Woodruff Keys*
Width Length Part Number
³⁄₁₆" X ³⁄₁₆" 1" 50-1501*
¹⁄₄" X ¹⁄₄" 1" 50-1502*
⁵⁄₁₆" X ⁵⁄₁₆" 1" 50-1503*
³⁄₁₆" X ³⁄₁₆" 12" 50-3501
¹⁄₄" X ¹⁄₄" 12" 50-3502
⁵⁄₁₆" X ⁵⁄₁₆" 12" 50-3503
* Packaged 25 per Box
Square Keys
⁵⁄₁₆" ¹⁄₄" 1¹⁄₄" 50-1511*
¹⁄₄" ³⁄₁₆" 1¹⁄₄" 50-1512*
³⁄₈" ⁵⁄₁₆" 1¹⁄₂" 50-1513*
⁵⁄₁₆" ¹⁄₄" 12" 50-3511
¹⁄₄" ³⁄₁₆" 12" 50-3512
³⁄₈" ⁵⁄₁₆" 12" 50-3513
* Packaged 25 per Box
Step Keys"A" "B" Length Part Number
—A—
—B—
MISCELLANEOUS PTO PARTS (Cont.)
125
Rectangular ³⁄₄" X ⁷⁄₈" L600 73-0750
Rectangular 1" X 1¹⁄₈" 1200, 1800, 2000 73-1001
Square 1³⁄₁₆" 2200 73-1188
Square 1⁵⁄₁₆" 44, 2600, 55 73-1313
Type Dimensions Series Part Number
Standard Series Shafting—72" Lengths
Type Dimensions Series Part Number
Standard Tubing—72" Lengths
Rectangular 1" X 1¹⁄₈" L600 70-1001
Rectangular 1¹⁄₄" X 1³⁄₈" 1200, 1800, 2000 70-1250
Round 1⁵⁄₈" X .065(16 GA) L600 70-1625
Round 2" X .083(14 GA) 1000, 1200, 1800, 2000 70-2000
Round 2¹⁄₈" X .120(11 GA) 2200 70-2125
Round 2¹⁄₄" X .120(11 GA) 2200, 44 70-2250
Round 2¹⁄₂" X .134(10 GA) 44, 55 70-2500
Round 2³⁄₄" X .109(12 GA) 44, 2600 70-2750
Round Rectangular
Rectangular Square
³⁄₄" RD ³⁄₁₆" 71-0750
¹³⁄₁₆" RD ¹⁄₄" 71-0813
⁷⁄₈" RD ¹⁄₄" 71-0875
1" RD ¹⁄₄" 71-1000
1¹⁄₄" RD ⁵⁄₁₆" 71-1250
Type Dimensions Part Number
Solid Shafting—72" Full Length Keyway
Solid Shafting—72" LengthsShaft Size Part Number
Square Hexagon
³⁄₄" SQ 72-0750
⁷⁄₈" SQ 72-0875
1" SQ 72-1000
1¹⁄₄" SQ 73-1250
⁷⁄₈" HEX 72-0888
1" HEX 72-1002
1¹⁄₈" HEX 72-1125
Round
SHAFTING & TUBING
126
3. Align the groove in the yoke with the slots in the bell and tube.
1. Position tube and bell so that slots are in line. Push tube into bell, position so that slots in the bell are in line with the slots in the tube.
2. Slide driveline into bell end. Bell and tube can move during installation; and can be realigned after driveline is positioned. By supporting the shield by hand the driveline is easy to move into the correct operating position.
4. Be sure you have the correct shield bearing for the end you are mounting. The large 3” O.D. outer tube uses the large bearing. The smaller 2 3/4” inner tube uses the small bearing.
5. Insert bearing into slot in bell and tube and into groove in the yoke. Push with thumb until bearing is in place.
6. The bearings must be inserted in the same direction in order to fit properly. The first three bearings go in easily due to the large amount of clearance.
7. The last bearing to be installed will take up the clearance and require slightly more effort to push into place. Be certain all four bearings are seated in the shield correctly. Do not allow the heel of the bearing to stick out of the tube. The correct installed position is shown in this picture. Shield Bearings must be installed properly in regards to the rotation of the driveline. This prevents the Shield Bearings from loosening or popping out of the Bearing slots.
NOTE: Before installing shield bearings, it is beneficial to apply somestandard grease onto the bearing groove of the yoke to prolong bearing life.
INSTALLATION OF FLEX BELL SHIELDS
Thicker SectionFor 3” OD
Tubes
Thinner SectionFor 2 3/4”
Tubes
DIRECTION OF ROTATION
FLEX BELL SYSTEM INSTRUCTION SHEET™
127
Neapco Inc. 740 Queen St. Pottstown PA 19464 Telephone: (800) 821-2374
8. This picture shows a bearing and the slot in the bearing tab that permits removal by use of a screwdriver.
9. Insert screwdriver into bearing and twist. If the bearing does not readily lift in the slot, twist in the other direction. Twist only enough to raise the heel of the bearing clear of the flex bell. Then, pull the bearing directly away from the shield. Remove all bearings this way.
10. Driveline can be pulled out of shield bell and tube.
1. Insert screwdriver (PHOTO 9)
2. Twist until heel clears (PHOTO 9)
3. Pull away from the direction the bearing was installed. (PHOTO 9)
NOTE: Small arrow on bearing indicatesdirection to twist for removal
We recommend only tack welding the collar to the slip yoke. Two or three spotsof weld is sufficient. Welding all-the-way around may cause the splined I.D. todistort or shrink, due to the build up of heat.
We recommend a minimum of 5.00 inches of shield engagement for shafts upto 36.00 inches centerline to centerline. Any shafts over 36.00 inches centerlineto centerline should have a minimum of 8.00 to 10.00 inches of shield overlap.
We recommend the use of the shield support bearing to eliminate vibration orwhipping.
We do not recommend the use of this shielding system on applicationsexceeding 2500 RPM.
�����
�����
�����
�����
REMOVAL OF FLEX BELL SHIELDS
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
128
INTERCHANGE
AEC 43093 10-521543113 10-521643123 10-521843125 10-157444011 50-151144012 50-151244013 50-151344N 3-004444R22 44-225644R24 44-2460
44S22 44-220644S22 44-2220570 1-0170576 1-0170576 1-0616588 3-01886H14 16-63036Q12 16-61766R15 16-61146R10 16-6210
6R12 16-61116R14 16-62136R16 16-62156R18 16-62166R19 16-62176R20 16-62186S18 16-61346Q12 16-61716Q18 16-61386S22Q6 16-6409
12P16W 12-134012P20W 12-131812Q14 12-117012Q16 12-115912Q18 12-114812R14 12-113312R15 12-113412R16 12-1155
12R18 12-116212R22 12-112012S20 12-118114N 1-207514Q16 20-931014Q20 20-912714R16 20-911514R19 20-921714R20 20-921814R22 20-9120
3532W 22-132535N 2-227535Q18 22-112435Q20 22-112835R18 22-113235R19 22-112935R20 22-121835R22 22-121935R23 22-117835S18 22-1142
35S22 22-113440012 10-041240013 10-041340022 10-042240023 10-531940023 10-155740043 10-417340053 10-494340073 10-047340081 10-0411
40093 10-049340095 10-416340103 10-414340113 10-447340115 10-533440115 10-418340123 10-419340150 10-045241103 10-316341112 10-0312
41112 10-175841113 10-031341122 10-032241122 10-043141123 10-032341132 10-033241133 10-033341150 10-312241153 10-038341173 10-0312
41181 10-038141183 10-320341193 10-318342013 10-469342063 10-170342093 10-170543063 10-5213
002556082 3-0188053120 1-1475081058 1-147511020 2-22751124585 1-01721174981 1-1275
13113 2-22751323723 2-2275224890 1-1475255608 3-01882556082 3-018826726 2-227526727 2-227526728 2-22753011020 2-22753026726 2-2275
3026726-4 2-22753026727 2-22753026727-2 2-2275339981 1-12754020 2-2275517311 1-2075517312 2-2275521720 1-2075526299 1-2075530538 2-2275
531220 1-2075542862 1-1275546945 1-1275548982 2-2275617909 1-01706179097 1-017061805 2-2275
ALLISCHALMERS
618805 2-2275618805-6 2-2275645053 1-01706450530 1-0172645110 1-01706451108 1-0170648366 1-1275648366-3 1-12756483663 1-1275653811 1-1475
665611 2-2275666878 1-147570053120 1-147570081058 1-147570617909 1-017070618805 2-227570645053 1-017070645110 1-017070648366 1-127571174981 1-1275
73011020 2-227573026726 2-227573026727 2-22757842779 1-1475823456 1-2075
BONDIOLI &PAVESI
1.03 70-0104
1.04 70-01051.05.07 8-10121.05.53 8-10081.05.54 8-10101.06 8-10201.07 8-10301.13 50-01121.41 1-012110.41 3-1021125113000 70-0705
125223000 70-08042.03 70-03052.04 70-02052.05.07 8-20122.06 8-20202.07 8-20302.41 1-0221204086860 8-8020204086861 8-8030204176851 8-7020
204176852 8-70303.03 70-03043.05.07 8-30123.05.50 8-30163.06 8-30203.07 8-30303.41 1-03214.04 70-04054.05.07 8-40124.05.50 8-4016
4.06 8-40204.07 8-40304.13 50-03124.41 1-04215.03 70-05045.04 70-05055.05.07 8-5012
5.05.54 8-50105.05.55 8-50115.06 8-50205.07 8-50305.41 2-0521507080351 8-8012507083751 8-8021507083851 8-8014507170351 8-7012507173751 8-7021
507173851 8-70146.03 70-07046.05.07 8-60126.05.44 8-60166.06 8-60206.07 8-60306.33.46 8-20086.33.48 8-20106.33.51 8-30106.33.52 8-3011
6.33.54 8-40106.33.55 8-40116.41 3-06217.81 3-07218.41 3-08219.81 3-0921
BUSH HOG119 2-22751294 3-0044
137 3-0044138 1-2075139 1-2075199 2-2275595 2-227562454 56-066662457 56-062663415 1-187565111 3-01887-39-576 1-0170
7-39-943 1-127587436 56-1857
BWD100-103 10-0423100-103 10-4143100-113 10-4473100-115 10-4183100-12 10-0412100-123 10-4193
100-13 10-0413100-22 10-0422100-23 10-0423100-43 10-0443100-43 10-4173100-53 10-0453100-63 10-0463100-73 10-0473100-83 10-0483100-93 10-0493
101-12 10-0312101-22 10-0322101-23 10-0323101-32 10-0332101-33 10-0333101-53 10-0383101-83 10-0381
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
129
INTERCHANGE
101-93 10-3183114-1004 1-1475114-103 1-1275114-104 1-2075114-105 2-2275114-148 1-0171114-151 3-0044114-2101 1-1875114-503 1-0172114-572 1-0170
114-575 1-017060072 11-175060088 50-250160100 64-655160100 56-066660104 56-260460448 63-125460715 63-064260824 52-461861112 12-1112
61113 12-111361115 12-111561117 12-111761118 12-111861119 12-121861120 12-112061133 12-113361134 12-113461135 12-113561148 12-1148
61155 12-115561159 12-115961162 12-116261163 12-116361168 12-116861169 12-116961170 12-117061171 12-117161172 12-117261173 12-1173
61174 12-117461175 12-117561176 12-117661181 12-118161197 12-119761228 12-130861252 12-131461255 12-131661263 12-132061471 12-1301
61768 58-062761774 58-063961775 58-065161965 46-690062101 22-231262112 56-230062116 22-121862118 22-121962119 22-111962120 22-1120
62124 22-112462125 22-112562126 22-112662128 22-112862129 22-112962130 22-113062131 22-1131
62132 22-113262133 22-113362134 22-113462138 22-113862140 22-114062142 22-114262155 22-115562158 22-115862178 22-117862190 22-1190
62228 22-130762940 56-229463074 73-075063112 73-100163204 51-017563241 50-150163242 50-150263243 50-150363244 50-150463245 50-1505
63246 50-150663311 50-151163312 50-151263313 50-151363620 52-580063682 50-250264118 26-511864119 22-131664119 26-511964131 26-5131
64138 26-513864353 53-243464602 63-126665101 10-413965111 10-041365112 10-417365113 10-511365114 10-047365115 10-457365116 10-4473
65118 10-419365123 10-512365124 10-049365125 10-412365129 10-512965131 10-513165134 10-041165136 10-494365138 10-155765141 10-5213
65148 10-175865149 10-514965154 10-444365157 10-032365159 10-038165164 10-449365169 10-176565171 10-042265172 10-043265173 10-0332
65174 10-517465175 11-107565176 10-031265178 10-032265183 10-031365184 10-033365185 10-3203
65186 10-038365187 10-043165189 10-041265191 10-416365193 10-045265196 10-414365197 10-411365199 10-318365213 10-5303
65217 10-312265261 10-531365263 10-046365268 10-042365323 10-533465342 10-533465342 10-418365344 10-437365347 10-316365348 10-4103
65354 10-176965371 10-469365373 10-170365375 10-170565384 10-535465385 10-170765421 10-536165432 10-158065499 10-429365527 10-3173
65528 10-316265919 10-428266000 10-527566141 10-521366187 10-521566210 10-521666233 10-157466233 10-157466256 10-521866341 53-063466460 56-2646
66740 56-064767034 64-062767035 64-063967036 56-062667036 64-065167040 64-182867041 64-184067042 65-285167042 64-185267052 65-0627
67053 65-063967054 56-185767054 65-065167058 65-182867059 65-184067060 65-185267065 64-275267065 65-262967066 65-263967067 70-1001
67068 70-125067069 70-162567070 70-200067071 70-225067072 70-275067076 73-118867101 18-7404
67115 18-711567117 18-711767119 18-711967120 18-712067125 18-712567127 18-712767128 18-712867132 18-7132
67136 18-740667140 18-740367238 18-731367238 20-930767922 52-341868052 63-065468482 52-581868702 63-066668800 71-075068801 71-0813
68802 71-087568803 71-100068804 71-125068810 72-075068811 72-087568812 72-100068813 72-112569101 20-930969115 20-911569117 20-9117
69118 20-921769118 20-911869119 20-911969120 20-912069127 20-912769132 20-913269149 20-912669154 20-915469214 20-921869214 20-9302
69302 20-93107009J 16-62167654J 16-6171
1S678 1-14752H861 1-14752R960 3-01883H6263 1-1475
3H8257 1-14753H8262 1-14753H8263 1-14755F2426 2-22755F2476 2-22755F6332 2-22755S7579 1-14756F2426 2-22756F4339 2-22756F4341 2-2275
6F4342 2-22756F4343 2-22756F9741 2-22757F3679 2-22758D1508 1-01728D2909 1-1475
CATERPILLAR
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
130
INTERCHANGE
AA-6537 10-4473AA-6539 10-0493AA-6540 10-4193AB-705 1-0170AB-706 51-5275PHA3790 51-2322
DEMPSTER
FEDERAL MOGULTRW
21016 10-415321017 10-521821018 10-043121019 10-413921020 10-541121021 10-031221022 10-032321023 10-0381
21024 10-038321025 10-041221026 10-041321027 10-042221028 10-445321029 10-044321030 10-045221031 10-045321032 10-047321033 10-048321034 10-100521035 10-1022
21036 10-312221037 10-316221038 10-318321039 10-411321040 10-413721041 10-413921042 10-417321043 10-418321044 10-428221045 10-4363
21046 10-444321047 10-447321048 10-448121049 10-457321050 16-621021051 16-611121052 16-611221053 16-621321054 16-630321055 16-6114
21056 16-621521057 16-630221058 16-621621059 16-613821060 16-613421061 16-621721062 16-621821063 16-614121064 16-6187
21065 16-640921066 10-461121067 10-470321068 11-107521069 11-175021070 11-175321071 11-270121072 11-270221073 11-471421074 11-5914
21075 11-955321076 12-111221077 12-111721078 12-111921079 12-113321080 12-113421081 12-113521082 12-1139
21083 12-115521084 12-115921085 12-116221086 12-116921087 12-117021088 12-117121089 12-117321090 12-1174
21091 12-117521092 12-117621093 12-119321094 12-119721095 12-121521096 12-121621097 12-130021098 12-130221099 12-131221100 12-111321101 12-111521102 12-1301
21103 12-116321104 12-132621105 12-114821106 12-118121107 12-111821108 12-130821109 12-121821110 12-112021111 12-117221112 12-1190
21113 12-116821114 12-131421115 12-131521116 12-131621117 12-131821118 12-131921119 12-132021120 12-132121121 12-132821122 12-1330
21123 12-133421124 12-134021125 12-135021126 12-232121127 12-232221128 12-233021129 12-250621130 12-252121131 10-0615
21132 10-457321133 10-512321134 10-513221135 10-494321136 10-514921137 10-176521138 10-517421139 11-107521140 10-320321141 10-4113
21142 10-157421143 10-527521144 10-530321145 10-532221146 10-533121147 10-533421148 10-410321149 10-1769
21150 18-711521151 18-712021152 18-740421153 10-170521154 10-535221155 10-535421156 10-170721157 10-5361
21158 10-158021159 10-536621160 10-541221161 10-543021162 16-060621163 16-061521164 16-062121165 16-161521166 16-360021167 16-612721168 16-612921169 16-6131
21170 16-613221171 16-616521172 16-617121173 16-617621174 16-617821175 10-515821176 16-651621177 16-651821178 16-661621179 18-7117
21180 18-711921181 18-712521182 18-712721183 18-712821184 18-713221185 18-730521186 18-731321187 18-731521188 18-732721189 18-7328
21190 18-733021191 18-733921192 18-740321193 18-740521194 18-740621195 18-750621196 20-911921197 20-916021198 20-9180
21199 20-918321200 20-931021201 20-911521202 20-911721203 20-921721204 20-921821205 20-912721206 20-912021207 20-913221208 20-9321
21209 20-932521210 20-915421211 20-930721212 20-918921213 20-919121214 20-919321215 20-930221216 20-9311
20001 1-147520007 1-187520017 1-017020018 1-017020019 1-017220036 1-127520037 1-2075
20038 2-227520038E 2-227620057 3-018820203 3-004420204 3-004520328 1-017120329 1-061620330 1-032120331 1-042120425 1-0121
20426 1-022120427 2-052120428 2-242120429 3-062120430 1-100120431 3-082120602 10-041320603 10-042220604 10-042320609 10-0473
20615 10-515620630 10-031220631 10-031320632 10-032220633 10-032320634 10-033220635 10-033320636 10-038320637 10-0381
20638 10-316320645 10-469320647 10-170321000 10-437321001 10-531321002 10-521321003 10-041221004 10-428221005 10-316221007 10-5215
21008 10-175821009 10-045221010 10-312221011 10-416321012 10-521621013 10-318321014 10-043221015 10-0411
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
131
INTERCHANGE
21217 20-931321218 20-931721219 20-931821220 20-931921221 20-932021222 20-932121223 20-932421224 20-9330
21225 20-950621226 20-952121227 22-110521228 22-112621229 22-113021230 22-113321231 22-114021232 22-114521233 22-115421234 22-1155
21235 22-115821236 22-116221237 22-119021238 22-130721239 22-131921240 22-132521241 22-133021242 22-133721243 22-133821244 22-2330
21245 22-352121246 22-950621247 22-952121248 26-513121249 26-513821250 22-113121251 22-112521252 22-113221253 22-112421254 22-1142
21255 22-112921256 22-121821257 22-112821258 22-121921259 22-231621260 22-113421261 22-113821262 22-231221263 22-117821264 22-1119
21265 22-112021266 22-131621267 26-514821268 26-515521269 26-516321270 26-530621271 26-532321272 26-532421273 26-532521274 44-1826
21275 44-204521276 44-210021277 44-220021278 44-220621279 44-222121280 44-225621281 44-236021282 44-245621283 44-2460
21284 44-261021285 44-282021286 44-320021287 44-440621288 44-442121289 44-630021290 46-690021291 46-6902
21292 48-118121293 48-720221294 48-920221295 50-011221296 50-031221297 50-051221298 50-041221299 50-061221300 26-511821301 26-5319
21302 26-532121303 26-511921304 10-046321305 10-444321306 10-449321307 10-414321308 10-412321309 10-317321310 10-429321311 10-5129
21312 10-513121313 16-760021314 10-042321315 10-413321316 10-046321317 10-033321318 10-049321319 10-414321320 10-419321321 10-4123
21322 10-316321323 10-032221324 10-410321325 10-033221326 20-911821327 20-930921328 20-912621329 20-913121330 22-231521331 22-2312
21332 22-231721333 22-134421334 22-134321335 44-222021336 44-220121337 10-413721338 56-266921339 10-419321340 10-447321341 10-0493
21342 10-155721343 10-418321344 50-150121345 50-150221346 50-150321347 50-150421348 50-150521349 50-150621350 56-0626
21351 56-185721353 50-151121354 50-151221355 50-151321356 50-221221357 50-231221358 50-250121359 50-2503
21360 50-350121361 50-350221362 50-350321363 50-351121364 50-351221365 50-351321366 51-017521367 51-232221368 11-175021369 52-3418
21370 52-460021371 52-461821372 52-580021373 52-581821374 53-063421375 53-063521376 53-183421377 53-203421378 53-241521379 53-2434
21380 53-243521381 53-264321382 53-264421383 53-350021384 55-213021385 55-241021386 55-260021387 55-280021388 55-283621389 55-3240
21390 55-364021391 55-930621392 55-932021393 55-932121394 56-060021395 56-060421396 56-061521398 56-084421399 56-160021401 64-0651
21402 65-065121403 69-065121405 56-180421406 56-200021407 56-200421408 56-210121409 56-210221410 56-212221411 56-220021412 56-2223
21413 56-229421414 56-229521416 64-275121417 65-285121418 69-255121420 56-232421421 56-244221422 56-260021423 56-2646
21424 56-300121425 56-410321426 56-610521427 56-610621428 58-062721429 58-063921431 64-185221432 65-1852
21433 69-185221435 58-065121436 58-122721437 58-123921438 58-125121439 58-162721440 58-163921441 58-165121442 58-182821443 58-1840
21444 58-185221445 58-202821447 64-272821448 65-282821449 69-262821452 64-274021453 65-284021457 64-275221459 16-640721461 64-2529
21462 65-262921466 64-253921467 65-263921471 64-255121473 22-111621474 22-111821476 64-652921477 65-662921481 64-653921482 65-6639
21486 64-655121488 50-250221489 70-200021490 58-204021491 58-205221492 58-222921493 58-223921494 58-225121495 58-263921496 58-4451
21500 56-066621502 56-230021503 56-260421523 63-064221524 63-065421525 63-066621526 63-125421527 63-126621529 64-062721530 64-0639
21531 64-162721532 64-163921533 64-165121534 64-182821535 64-184021536 64-272721537 64-273921538 64-444721539 65-0627
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
132
INTERCHANGE
21540 65-063921541 65-162721542 65-1639
21543 65-165121544 65-182821545 65-184021546 65-282721547 65-283921548 65-442321549 67-062721564 69-064021565 69-064821566 69-1240
21567 69-124821568 69-182821569 69-184021570 69-224021571 69-224821572 69-252721573 69-253921574 70-010421575 70-010521576 70-0205
21577 70-030421578 70-030521579 70-040521580 70-050421581 70-050521582 70-070421583 70-100121584 70-125021585 70-162521586 70-2104
21587 70-210521588 70-212521589 70-220421590 70-220521591 70-225021592 70-225621593 70-240421594 70-240521595 70-250021596 70-2750
21597 71-075021598 71-081321599 71-087521600 71-100021601 71-125021602 72-075021603 72-087521604 72-088821605 72-100021606 72-1002
21607 72-112521608 72-223121609 73-075021610 73-100121611 73-118821612 73-125021613 73-131321614 8-012021615 8-013021616 8-100821617 8-101021618 8-101221619 8-102021620 8-1021
21621 8-103021622 8-200821623 8-2010
21624 8-201221625 8-202021626 8-202121627 8-203021628 8-210821629 8-211021630 8-211221631 8-212021632 8-212121633 8-2130
21634 8-222021635 8-223021636 8-232021637 8-233021638 8-241021639 8-241121640 8-242021641 8-242121642 8-243021643 8-3010
21644 8-301121645 8-301221646 8-301521647 8-301621648 8-302021649 8-302121650 8-303021651 8-401021652 8-401121653 8-4012
21654 8-401521655 8-401621656 8-402021657 8-402121658 8-403021659 8-501021660 8-501121661 8-501221662 8-501521663 8-5016
21664 8-502021665 8-502121666 8-503021667 8-601021668 8-601121669 8-601221670 8-601521671 8-601621672 8-602021673 8-6021
21674 8-603021675 69-264821676 10-511321677 20-921621678 8-241221679 50-108021680 50-109021681 50-128021682 56-810821683 70-070521684 70-080421685 8-251121686 8-251221687 8-2514
21688 8-251521689 8-252021690 8-2521
21691 8-253021693 8-253521694 8-701121695 8-701221696 8-701421697 8-702021698 8-702121699 8-703021700 8-801121701 8-8012
21702 8-801421703 8-801521704 8-801621705 8-802021706 8-802121707 8-803021708 10-043221709 10-043321710 12-140021711 12-1410
21712 16-860021713 18-180021714 18-180221715 18-180521716 18-181021717 20-930621719 22-122621720 22-220021721 22-220521722 22-2275
21723 24-240021724 24-240121725 24-240621726 24-242021727 24-242121728 44-447521729 53-060021730 53-204721731 53-224721732 56-2446
21733 61-120021734 64-442421735 64-443521736 65-443521737 68-224421738 68-224521739 80-120221740 80-350221741 80-350421742 80-3506
21743 80-352121744 80-440221745 80-440421746 80-440621747 80-442121748 10-417321749 55-222921750 58-442921751 58-443921752 58-445121753 12-230021750 58-442921751 58-443921752 58-4451
21753 12-2300
FIAT ALLIS70645053 1-017270645110 1-017070648366 1-1275
FMC1261563 1-01701263637 12-11901263638 1-12751263644 12-1326140-7114 12-1190140-7717 1-127516602 3-0188171-4208 1-01702241763 1-1875
2284721 1-1275230-8780 1-1875230-8788 18-7403LV00612 1-0170
FORD107854 1-1475145421 2-2275148357 1-1275
171333 1-1475175423 1-2075221613 1-2075291971 1-1475309575 1-1475C1TT-4724A 3-0188C1TZ-4635A 3-0188C3TZ-3815A 1-1475C5TZ-3815A 1-1475C6TZ-3815B 1-1475
CBPN-3250A 1-1475CBPN-3350B 1-1475
G & G128-1200 56-2004134-1214 70-1001134-1618 70-1250136-1200 72-0750136-1400 72-0875
136-1900 73-1188136-2000 73-1250136-2100 73-1313138-1214 73-0750138-1618 73-1001140-1400 70-2000140-3500 70-2125142-1400 72-0888142-1600 72-1002142-1800 72-1125
144-1200 71-0750144-1300 71-0813144-1400 71-0875144-1600 71-1000144-2000 71-1250177-0600 16-6129177-1200 12-1340
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
133
INTERCHANGE
177-1400 20-9126177-3500 22-1344177-4400 44-2100180-0600 16-6131180-1200 12-1318181-1400 20-9131181-1200 12-1334181-3500 22-1325181-4400 44-2200182-0606 16-6409
182-0621 16-0621182-1206 12-1190182-1221 12-1193182-1222 12-1172182-1406 20-9309182-1421 20-9321182-3506 22-2312182-3521 22-2317182-4406 44-2220182-4421 44-2201
18230606 16-060618231206 12-233018231221 12-232118231406 20-933018233506 22-2330183-0616 16-6302183-0620 16-6127183-1216 12-1163183-3526 22-1126184-0615 16-6114
184-0513 10-4173184-0514 10-5213184-0516 10-4573184-0518 10-4143184-0520 10-4193184-0521 10-4183184-0610 16-6210184-0612 16-6111184-0614 16-6213184-0616 16-6215
184-0618 16-6216184-0620 16-6218184-1216 12-1115184-1218 12-1117184-1220 12-1176184-1222 12-1120184-1416 20-9115184-1418 20-9117184-1420 20-9218184-1422 20-9120
184-1423 20-9154184-1424 20-9307184-3516 22-1131184-3518 22-1132184-3519 22-1129184-3520 22-1133184-3520 22-1218184-3522 22-1219184-3523 22-1119184-3524 22-1120
184-3528 22-1316184-4422 44-2256184-4424 44-2460184-4426 44-2610184-4428 44-2820184-51220 12-111918451420 20-9119
185-3520 22-112819100612 16-617619100614 16-6178192-0618 16-6134192-0622 16-6187192-1218 12-1181192-1422 20-9132192-3522 22-1134194-0600 53-0635194-1400 53-2034
194-3500 53-2434194-3500 53-2435196-1216 12-1319196-1218 12-1302196-1220 12-1330196-3520 22-1145196-3522 22-1337196-3524 22-1162302-0600 1-1475302-0675 1-0170
302-1200 1-1275302-1400 1-2075302-1875 1-1875302-3500 2-2275302-4400 3-0044302-5500 3-0045804-1216 12-1159
GMB
GEHL510004 1-1475
510007 1-2075510036 2-2275510114 1-2075CPL35N 2-2275GN100W 1-2075
G5-170X 1-0170G5-188X 3-0188
GGPL-6R 1-1475GGPL-12R 1-1275GGPL-14R 1-2075GGPL-35R 2-2275GGPL-44R 3-0044GGPL-55N 3-0045GUA-7 1-0321GUA-8 1-0421GUA-11 2-0521GUA-14 2-2421
HESSTON700708365 20-9309750182 1-0170750208 10-4153751255 1-1275753111 1-1275753772 1-2075754184 1-2075754465 20-9309
755157 10-5322756817 1-0170756924 1-2075756999 1-1875757443 1-1275800854 1-0170801449 3-0188
802496 3-0044806240 2-2275807420 2-2275814566 22-2312845180 22-2312845198 2-22758803819 56-1857933356 1-0172
IHC124348R91 1-0170139764H1 1-1475147511H1 1-1475147512H1 1-1475150635R91 1-1475150635R92 1-1475150965R91 1-1475154073H1 3-0188174980C91 2-2275179867H1 3-0045
197035R91 1-1475200464C91 1-2075202347C91 1-1475202348C91 1-1475208959R91 1-0170210786R91 1-1475222431C91 1-0170222434C1 56-0666240204R91 3-0188337439R91 1-1475
347960R91 2-2275350254R91 1-1475357439R91 1-1475357606R91 1-1475363308R91 1-1475363312R91 1-1475363313R91 1-1475366312R91 1-1475366313R91 1-1475368730R91 1-1475
387097R91 3-0188399040C91 1-1475432473C91 1-1475447797C91 1-0170470077R91 3-0045474793R91 1-1875476674R91 1-1475480486R91 1-1275493849R91 3-0044509047R91 1-2075
511644R91 1-1475568102R91 18-7403569047R91 1-2075569262R91 1-1275581954R91 1-1875607917R91 1-2075609144R91 1-1275613471R91 2-2275627211C1 1-1475656224R91 2-2275
656225R91 1-2075659262R91 1-1275660116R91 2-2275661372R91 1-1475661677R91 1-1475663120R91 1-1475667496R91 1-2075
667558R91 1-2075669564R91 1-1275826057C1 10-4611913774R91 3-0188975663R92 1-0170983268R91 1-1475
1175-FHA 2-22751963-CHA 2-22752417-CHA 2-2275753772 1-2075A20684 1-1475A30408 1-1475A30425 1-1475A30435 1-1475A40106 2-2275A40435 1-1475B13270 1-2075B13272 1-1275
B13275 1-1275B15275 1-1275B18132 1-1475C12319 1-0170F50537 1-1475F61290 18-7403F85470 1-2075F95847 56-0626FH756924 1-2075FH845032 1-1275
H582437 1-0172H658179 56-0626H71167 1-1875R14744 2-2275T27790 2-2275T27791 22-1190T36575 1-1475T37173 1-1475T37895 2-2275T37922 3-0188
T40106 2-2275T41672 2-2275VTA3227 1-1475
J. I. CASE
JACOBSEN354749 1-0170500736 56-0666500737 1-0170500919 1-0170
JOHN DEEREAE-11027 1-1875AE-11033W 1-2075AE-14978E 1-1475AE-20831 22-2317AE-21122 2-2275AE-22753 1-2075AE-23516 2-2275AE-23716 1-1275
AE-26238 16-6409AE-30034 3-0045AE-679E 1-1475AE-793E 1-1475AH-18327 1-1475AH-79074 1-1475AH-83541 1-1475
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
134
INTERCHANGE
AJ-5729H 1-0170AJ-7330H 1-1475AJ-7331H 1-1475AJ-8815N 1-0170AL-1564N 1-1475AM-2568E 2-2275AM-2871E 1-1275AM-37004 1-1475AM-37184 1-0170AM-793E 1-1475
AP-24580 1-2075AP-24580H 1-2075AR-21101R 1-1475AU-13093U 2-2275AW-13174 1-1475ND-1915D 1-1475XAG-63796H 1-1475
LILLISTON01-61-019 20-930901-61-021 1-207504-61-121 1-187504-61-160 22-231204-61-168 2-227510-61-033 2-227511-61-011 1-017017-61-004 1-127523-61-007 2-227529-61-002 1-2075
149143 20-9309221613 1-2075720424 2-2275729010 3-0188729013 26-5321732324 1-1475737100 1-0170745121 10-4443
745234 1-0172747247 56-0666747250 10-4573747251 10-4139747252 1-0170774268 56-2604
LONG
1037427M91 10-41391037433M91 12-11901506100M91 2-22751508762M91 2-2275195379M91 3-004530516E1 1-012130517E1 1-032130518E1 1-042130673E1 10-517430674E1 10-5129
30675E1 10-513130679E1 16-612930680E1 16-613130681E1 12-134030683E1 12-131830688E1 44-210030691E1 20-9126
MASSEYFERGUSON
30692E1 20-913130695E1 22-134430698E1 22-134330699E1 22-132530703E1 26-515530707E1 44-220030710E1 56-229530711E1 56-2646315726M91 1-1475665137M91 1-2075
784489M91 1-1475830962M91 1-1275835501M918 2-2275835771M91 1-0170835790M91 1-2075835799M91 1-2075835991M91 2-2275836459M91 1-0170836461M91 1-1275836514M91 1-1475
836891M91 1-1475840676M91 2-2275840824M91 1-1475840824M92 1-1475840899M91 2-2275840899M92 2-2275841193M91 1-1475841193M92 1-1475841235M91 3-0045841236M91 1-1275
841237M91 1-2075841603M91 1-1275841604M91 1-2075
MCQUAY-NORRIS6R12 16-6111U03-1 1-1475U03-11 1-1275U03-12 2-2275
U03-44 1-2075U03-45 3-0045UO-52 10-0463UO3-101 22-1120UO3-103 16-6171UO3-105 12-1162UO3-106 20-9115UO3-107 12-1135UO3-109 16-6302UO3-111 12-1170
UO3-47 10-4133UO3-48 10-0423UO3-49 10-0443UO3-51 10-0453UO3-54 10-0452UO3-56 10-0493UO3-58 10-4143UO3-59 10-4473UO3-61 10-4183UO3-62 10-4193
UO3-65 10-0322UO3-66 10-0333UO3-67 10-0383UO3-68 10-0332UO3-70 10-1705UO3-73 22-1219UO3-77 16-6112
UO3-78 16-6215UO3-79 16-6216UO3-80 16-6218UO3-82 12-1115UO3-83 16-6409UO3-85 12-1218UO3-87 20-9132UO3-88 20-9120UO3-89 16-6114UO3-90 16-6134
UO3-91 16-6187UO3-92 22-1218UO3-94 64-2739UO3-95 12-1308UO3-98 20-9119
1587A 1-14752060D 1-1875
2107A 1-06162207A 1-01702207C 1-01722207E 1-01702525A 1-12752537A 1-20752593A 2-22752593ELB 2-22763287A 3-01883287C 2-0521
3575B 3-00444502A 3-0045MY1-150 10-3122MY1-83 10-3203MY1-93 10-3183MY2-13 10-4133MY2-93 10-1705MYI-12 10-0312MYI-22 10-0322MYI-23 10-0323
MYI-32 10-0332MYI-33 10-0333MYI-53 10-0383MYI-81 10-0381MYO-103 10-0423MYO-113 10-4473MYO-115 10-4183MYO-12 10-0412MYO-123 10-4123MYO-124 10-1574
MYO-13 10-0413MYO-150 10-0452MYO-22 10-0422MYO-23 10-0423MYO-43 10-0443MYO-53 10-0453MYO-63 10-0463MYO-73 10-0473MYO-81 10-0411MYO-83 10-0483
MYO-8393 10-4573MYO-93 10-0493MYO-95 10-4163MYO103113 10-5216MYO124125 10-1574MYO81 10-0432MYO8393 10-5215
MOTORMASTER
NEW HOLLAND126761 3-0188129437 1-2075131894 26-5321139842 1-0170142105 10-4573143984 26-5319167563 1-0171
222361 1-1475244947 1-017227993 1-147529214 2-227533661 1-017034754 20-930934761 1-207534780 22-231239360 1-127547612 18-7403
47621 1-187548263 1-1475512629 1-147552495 1-1475578805 3-0044625086 12-117266316 10-4139687115 2-2276709315 1-0172850616 18-7330
850617 20-9330855141 22-2330856190 10-5430856192 12-23309601705 18-74039601706 12-1190
010530 1-1275
011070 2-2275012014 1-2075012324 1-1475012716 1-12750777HSA 1-1475K-2550A 1-1475K-2964A 22-2312K-2980A 2-2275K-3339A 12-1190K-3347A 1-1275
K-3410A 1-2075K-3591A 1-2075K-3595A 1-2075K-3803A 1-1875K-4680A 12-1190
NEW IDEA
PRECISION1000 8-10121002 8-2012
1004 8-30121006 8-40121008 8-50121010 8-60121011 8-60211020 8-10081021 8-1010
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
135
INTERCHANGE
1022 8-20081023 8-20101024 8-30101026 8-40101027 8-40111028 8-50101029 8-50111030 8-60111033 8-30161034 8-4016
1035 8-50161036 8-60161041 8-10301042 8-20301043 8-30301044 8-40301045 8-50301046 8-60301051 8-10201052 8-2020
1053 8-30201054 8-40201055 8-50201056 8-60201061 70-01051062 70-02051064 70-04051065 70-05051071 70-01041072 70-0305
1073 70-03041075 70-05041076 70-07041081 50-01121082 50-04121085 50-05121106 55-93061120 55-93201121 55-93211124 55-2410
1126 55-26001128 55-28001132 55-32401154 55-36401155 55-21301177 73-13131187 70-25001190 53-26431200 12-13121203 12-1133
1206 12-11341209 12-11551211 12-11151216 12-11621219 12-11171221 12-11181224 12-11391226 12-11191229 12-11201230 12-1175
1231 12-12181241 65-28511242 12-11701243 12-11591244 12-11631247 12-11681249 64-2751
1254 12-11811257 12-11721259 12-23211263 12-13161265 12-11741266 12-23301272 12-13141275 12-11731277 73-10011287 70-1250
1291 12-11901292 12-11931293 12-13181294 12-13401300 20-91151305 20-93181308 20-93171310 20-93021312 20-91201313 20-9307
1314 20-91541316 20-92171317 20-92181319 20-93101322 20-91271326 20-91601347 65-28401349 64-27521352 20-91321353 20-9193
1366 20-93301367 20-93211374 20-91261375 20-91311387 70-20001390 53-20341408 44-24601412 44-28201414 44-20451426 26-5118
1428 26-51191442 44-22061447 65-44231449 64-44471450 44-63001452 44-22201453 44-22011454 44-21001455 44-22001460 44-4406
1461 44-44211472 26-53211473 26-53191485 70-27501501 1-01701502 1-01721504 56-18571511 10-41331512 10-04131513 10-0443
1516 10-44531518 10-04631519 10-04731521 10-45731524 10-04931526 10-44731527 10-4143
1529 10-41931530 10-41231534 10-04221537 10-04121539 10-04521544 11-27021546 10-04531548 10-04831549 11-59141551 11-1753
1552 10-41831560 10-42821566 10-41391576 71-08751577 71-10001579 71-12501581 72-07501582 72-08751583 72-10001584 71-0750
1585 72-10021587 72-11251588 50-25021589 50-25011600 8-21121630 8-21081631 8-21101632 8-24101636 8-24111641 8-2130
1642 8-22301643 8-01301644 8-23301646 8-24301651 8-21201652 8-22201653 8-01201654 8-23201656 8-24201661 70-2105
1662 70-22051666 70-24051671 70-21041672 70-22041676 70-24041703 10-47031751 10-03231752 10-03331754 10-03831755 10-3183
1756 10-31631759 10-03121760 10-03221761 10-31221763 10-03811772 10-31621800 22-11311801 22-11321803 22-11291805 22-1133
1806 22-11451811 22-11781812 22-11201813 22-13381814 22-12181815 22-12191820 22-1125
1825 22-11241827 22-11281842 22-11341843 22-13301847 65-26391849 64-25391852 22-23121852 22-23121853 22-23171857 22-1319
1870 22-23301871 22-35211877 73-11881887 70-21251900 16-61111904 16-61141916 16-63021921 16-64091921 16-64071923 16-6213
1924 16-62151926 16-62181927 16-62171935 16-61311949 64-16511952 16-06151960 16-06061977 73-07501987 70-1001331AG 3-0621
338 1-0170341AG 1-0221344AG 1-0421351 3-0188507 1-1875811 1-0121812 1-1001813 1-0321814 2-2421815 2-0521
860 1-1475880 1-2075888 3-0044889 3-0045964 2-2275995 1-1275
3NYR16-4 22-1131
3NYS22-8 22-114044RYQ21-1 44-210044RYR22-1 44-225644RYR24-4 44-246044RYR26-1 44-261044RYR28-2 44-282044RYS22-1A 44-222044RYS22-2 44-220644RYS22-21A 44-220155NY36-4 55-3640
55NYQ21-3 55-213055NYR24-1 55-241055NYR28 55-280055NYR32-4 55-324055NYS22-56A 55-932155NYS28-36 55-2836907-10-1 63-1254
ROCKWELL
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
136
INTERCHANGE
907-11-1 63-1266907-50-4 58-1227907-51-4 58-1239909-50-3 65-2828909-50-4 58-2028922-50-4 58-2229922-51-6 65-2639CP170X 1-0170CP188X 3-0188CP35R 2-2275
CP44R 3-0044CP55N 3-0045CPL12R 1-1275CPL14N 1-2075CPL6R 1-1475L12NY30-23 12-1308L12NYH18 12-1168L12NYH18-2 12-1173L12NYP16-20 12-1340L12NYP16-27 12-1197
L12NYP20-9 12-1318L12NYQ14-1 12-1113L12NYQ14-2 12-1170L12NYQ16-16 12-1314L12NYQ16-3 12-1159L12NYQ18-1 12-1163L12NYQ18-3 12-1148L12NYR12 12-1312L12NYR14-1 12-1133L12NYR16-13 12-1316
L12NYR16-23 12-1135L12NYR16-8 12-1115L12NYR16-9 12-1155L12NYR18-30 12-1162L12NYR19-3 12-1118L12NYR20 12-1218L12NYR20-15 12-1169L12NYR20-3 12-1174L12NYR22 12-1120L12NYR24-7 12-1175
L12NYS18-1 12-1181L12NYS20-7 12-1171L12NYS22-12 12-1172L12NYS22-16A 12-1193L14SY30-43 20-9131L14SYQ16-8 20-9310L14SYQ18 20-9183L14SYQ20 20-9127L14SYR16-6 20-9115L14SYR18-16 20-9117
L14SYR19-3 20-9118L14SYR20-17 20-9119L14SYR20-174 20-9218L14SYR20-47 20-9302L14SYR22-24A 20-9309L14SYR22-7 20-9120L14SYR23-4 20-9154L14SYR24-10 20-9307L14SYS22-16 20-9132L16SYQ16-1 22-1125
L16SYQ18-1 22-1190L16SYQ19-19 22-1344L16SYQ20-3 22-1128L16SYQ24 22-1130L16SYR-18-12 22-1132L16SYR19-2 22-1129L16SYR20-10 22-1218
L16SYR20-6 22-1133L16SYR22-10 22-1219L16SYR22-15 22-1155L16SYR23 22-1138L16SYR23 22-1178L16SYS18-1 22-1142L16SYS22-36 22-2317L16SYS22-3A 22-2312L16SYS22-46 22-1105L6NYH14-3 16-6303
L6NYQ12-3 16-6171L6NYQ18 16-6138L6NYR12-4 16-6111L6NYR13-6 16-6112L6NYR14-21 16-6213L6NYR15-12 16-6114L6NYR16-66 16-6215L6NYR18-8 16-6216L6NYR19-1 16-6217L6NYR20-38 16-6218
L6NYS18 16-6134L6NYS22-1A 16-6409RT2-14 70-2000RT2125-11 70-2125RT225-11 70-2250RT275-12 70-2750SH-Q12-16-72 73-0750SH-Q16-7-72 73-1001SQS100-72 72-1000SQS1187-72 73-1188
SQS125-72 73-1250SQS13125-72 73-1313SQS75-72 72-0750T-25-10-72 70-2500TU-Q16-4-72 70-1001TU-Q20-28-72 70-1250
SEALED POWER838-12 1-1275
838-14 1-2075838-2127 1-1875838-35 2-2275838-40012 10-0412838-40013 10-0413838-40023 10-1557838-40043 10-5313838-40063 10-5213838-40103 10-4143838-40113 10-4473
838-40115 10-4183838-41103 10-3163838-41122 10-0322838-41132 10-0332838-41133 10-0333838-41153 10-0383838-43093 10-5215838-43123 10-5218838-44 3-0044838-503 1-0170
838-55 3-0045838-570 1-0170838-588 3-0188838-68 1-1475
SPICER10-97 50-1503102701SF 11-2701102702SF 11-27021075XS 11-107512-91-72 71-075014-91-72 71-087516-91-72 71-10001630627200 70-2000175-3 11-17532-28-1127 20-9131
2-28222706 65-28282-4-102 20-91262-4-1263 20-91152-4-1363 20-91172-4-1413 20-93022-4-1423 20-91192-4-1463 20-93072-4-1623 20-91542-4-172 20-91272-4-1873 20-9120
2-4-192 20-93102-4-3041X 20-93092-4-3101 20-91322-4-3681 20-91802-4-4271 20-93112-4-6451X 20-93302-55-62 53-20342-82-83-3714X 65-284020-91-72 71-1250208565-4 58-1227
208565-4 58-1239228217-3316X 64-25392282173316 65-2639228226-3502X 64-2740228397X 56-2004228397X 56-2300229291X 56-1857230565-72 73-1001230566-72 72-1000230575-72 72-0875
230579-72 73-0750230590-72 72-0750230591 72-1125278269-72 73-1188278635-72 73-1313278814-72 70-10013-16-203 56-26463-26-467 22-13253-26-587 26-51553-28-667 22-1319
3-4-1003 22-11783-4-10391X 22-23123-4-10411X 22-23163-4-1143 22-11623-4-1173 26-51193-4-12 22-13443-4-1323 26-51183-4-1353 22-11553-4-182 26-51483-4-32 22-1190
3-4-4-131X 44-22203-4-4-91 44-22063-4-5071 22-11423-4-5101 22-11343-4-5131X 22-11053-4-52 22-11253-4-5501 22-1330
1-28-277 12-13081-28-277 12-13341-4-1011X 12-11931-4-1091 12-11811-4-162 12-13401-4-182 12-13011-4-222 12-1163
1-4-242 12-11971-4-262 12-13181-4-2923 12-13121-4-2983 12-11341-4-3003 12-11151-4-3043 12-13261-4-3063 12-11171-4-3083 12-11181-4-3093 12-11761-4-3113 12-1119
1-4-3133 12-11201-4-3153 12-11751-4-861 12-11711-4-881X 12-11901-4-981 12-11721-60-34-3519X 64-275110-191 50-150110-2-29 10-102210-3-122X 10-312210-3-12X 10-0312
10-3-162X 10-316210-3-163X 10-316310-3-183X 10-318310-3-22X 10-032210-3-23X 10-032310-3-32X 10-033210-3-33X 10-033310-3-81X 10-038110-3-83X 10-038310-4-103 10-4103
10-4-113 10-411310-4-12 10-041210-4-123 10-412310-4-13 10-041310-4-133 10-413310-4-1363 10-436310-4-143 10-414310-4-173 10-417310-4-183 10-418310-4-193 10-4193
10-4-22 10-042210-4-23 10-042310-4-282 10-428210-4-43 10-044310-4-443 10-444310-4-453 10-445310-4-473 10-447310-4-481 10-448110-4-52 10-045210-4-53 10-0453
10-4-573 10-457310-4-611SX 10-461110-4-63 10-046310-4-73 10-047310-4-83 10-048310-4-93 10-049310-8 50-1502
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
137
INTERCHANGE
3-4-6171 26-51383-4-6481X 26-53213-4-6511X 22-23173-4-6771X 26-53193-4-72 22-11283-4-723 22-11313-4-743 22-11323-4-783 22-11333-4-793 22-12183-4-813 22-1219
3-4-833 22-11203-55-182 53-26443.4-4-12 44-21003.4-4-173 44-22563.4-4-183 44-24603.4-4-193 44-28203.4-4-23 44-26103.4-4-41X 44-22014714X 11-47145-103X 1-0170
5-110X 1-01725-129X 1-20755-170X 1-01705-188X 3-01885-2011X 1-18755-242X 1-12755-243-1X 2-22765-243X 2-22755-430X 1-06165-431X 3-0044
5-432X 3-00455-88X 2-05215-92X 1-1475500007-22 50-1504500007-24 50-1505500541-7 50-2501500570-6 50-25025914X 11-5914
TOWMOTOR6D2529 1-18758D1508 1-0170
TRW(See Federal Mogul/TRW)
WABCO404645 1-1275
427271 1-1475474804 1-2075723741 1-1275SR-6109 1-1475TG-4614 1-1475VA-1775 1-1475
WALTERSCHEIDAGMASTER
1-4-262 12-13181-4-2923 12-13121-4-3003 12-11151-4-3043 12-13261-4-3063 12-11171-4-3083 12-11481-4-3083 12-11181-4-3093 12-11761-4-3113 12-11191-4-3133 12-1120
1-4-3153 12-11751-4-861 12-11711-4-881X 12-11901-4-981 12-117210.01.00 1-100110-3-122X 10-312210-3-163X 10-316310-3-183X 10-318310-3-22X 10-032210-3-23X 10-0323
10-3-32X 10-033210-3-33X 10-033310-3-81X 10-038110-3-83X 10-038310-4-103 10-042310-4-12 10-041210-4-123 10-412310-4-13 10-041310-4-133 10-413310-4-1363 10-4363
10-4-143 10-414310-4-173 10-417310-4-183 10-418310-4-193 10-419310-4-22 10-042210-4-23 10-042310-4-282 10-428210-4-43 10-044310-4-453 10-445310-4-473 10-4473
10-4-481 10-448110-4-52 10-045210-4-53 10-045310-4-573 10-457310-4-63 10-046310-4-73 10-047310-4-93 10-049311.03.00 1-032116-30-62 70-200016-91-72 71-1000
2-28-1127 20-91312-4-102 20-91262-4-1263 20-91152-4-1363 20-91172-4-1413 20-93022-4-1423 20-91192-4-1463 20-93072-4-1623 20-91542-4-172 20-91272-4-1873 20-9120
2-4-192 20-93102-4-2663 20-91602-4-3041X 20-93092-4-3101 20-913220-91-72 71-125020.00.00 1-022121.00.00 1-042122-30-32 70-2750
229381X0 12-2330229382X0 20-9330229383X0 22-2330229387X0 12-2321229389X0 22-3521230566-72 72-1000230591 72-1125278635-72 73-1313278814-72 70-10013-16-203 56-2646
3-26-467 22-13253-26-587 26-51553-4-1003 22-11783-4-10391X 22-23123-4-1143 22-11623-4-1173 26-51193-4-12 22-13443-4-1323 26-51183-4-1773 22-13373-4-182 26-5148
3-4-32 22-11903-4-4-12 44-21003-4-4-131X 44-22203-4-4-183 44-24603-4-4-41X 44-22013-4-5071 22-11423-4-5101 22-11343-4-5131X 22-11053-4-52 22-11253-4-5501 22-1330
3-4-6171 26-51383-4-6481X 26-53213-4-6511X 22-23173-4-6771X 26-53193-4-72 22-11283-4-723 22-11313-4-743 22-11323-4-783 22-11333-4-793 22-12183-4-813 22-1219
3-4-833 22-11203-55-182 53-264435.00.00 2-242136.00.00 3-252136.10.00 8-251236.10.02 8-252136.13.100 8-253036.14.100 8-252036.18.02 8-251436.22.101 8-2525
36.24.100 8-251536.24.102 8-253536.24.106 8-25115-430X 1-0616HM129 1-2075HM188 3-0188HM242 1-1275HM243 2-2275HM431 3-0044
026740 3-25211-28-277 12-13341-4-1011X 12-11931-4-1091 12-11811-4-162 12-13401-4-182 12-13011-4-222 12-11631-4-242 12-1197
10001448 65-284010003548 65-263910004448 65-4423101-3506 22-2330101-3521 22-3521101-4406 44-4406102-0606 16-6409102-0621 16-0621102-1006 10-4139102-1206 12-1190
102-1221 12-1193102-1406 20-9309102-1421 20-9325102-3506 22-2312102-3521 22-2317102-4406 44-2220102-4420 44-6300102-4421 44-2201102-5506 55-9306102-5521 55-9321
102-6106 8-1012102-6121 8-1021102-6506 8-5012102-6521 8-5021102-6706 8-7012102-6720 8-7014102-6721 8-7021102-6806 8-8012102-6820 8-8014102-6821 8-8021
102-7106 8-2112102-7121 8-2121102-7621 8-2421102-7906 8-2512102-7920 8-2514102-7921 8-2521102-8206 8-2012102-8221 8-2021102-8306 8-3012102-8321 8-3021
102-8406 8-4012102-8421 8-4021102-8606 8-6012102-8621 8-6021104-1206 12-2506104-3506 22-9506105-0615 16-0615106-0615 16-161511000648 65-165111001248 64-2739
11001448 64-274011001460 64-275211003548 64-255111004448 64-444713002006 56-1857200-0600 1-1475200-0675 1-0170200-1000 1-0170200-1200 1-1275200-1400 1-2075
200-1875 1-1875200-2600 3-0188200-3500 2-2275200-4400 3-0044200-5500 3-0045200-6154 1-0121200-6580 2-0521200-6794 3-0721
WEASLER100-0606 16-0606100-1206 12-2330100-1221 12-2321100-1406 20-9330100-1421 20-932110000648 65-165110001248 65-2851
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
NEAPCOPART NO. PART NO.
138
INTERCHANGE
200-6806 3-0821200-7155 1-1001200-7676 2-2421200-7989 3-2521200-8261 1-0221200-8370 1-0321200-8474 1-0421200-8692 3-0621300-0600 16-6129300-1200 12-1340
300-1400 20-9126300-3500 22-1344300-4400 44-2100300-5500 55-2130300-6126 8-1030300-6229 8-2030300-6336 8-3030300-6436 8-4030300-6545 8-5030300-6645 8-6030
300-6745 8-7030300-6854 8-8030300-7123 8-2130300-7234 8-2230300-7334 8-0130300-7434 8-2330300-7639 8-2430300-7957 8-2530400-7284 70-2205400-0012 72-0750
400-0016 72-1000400-0019 73-1188400-0020 73-1250400-0021 73-1313400-1214 73-0750400-1618 73-1001400-6126 70-0105400-6229 70-0205400-6436 70-0405400-6545 70-0505
400-6745 70-0705400-7123 70-2105400-7539 70-2405500-1400 53-2034500-3500 53-2435500-4400 53-2643501-3500 53-3500508-1080 50-1080508-1090 50-1090508-1280 50-1280
510-0600 53-0635600-1618 70-1001600-2022 70-1250600-6133 70-0104600-6236 70-0305600-6343 70-0304600-6552 70-0504600-6654 70-0704600-6863 70-0804600-7130 70-2104
600-7241 70-2204600-7548 70-2404602-3500 70-2125602-4400 70-2500700-0600 16-6131700-1200 12-1318700-1400 20-9313700-6133 8-1020
700-6236 8-2020700-6343 8-3020700-6443 8-4020700-6552 8-5020700-6654 8-6020700-6754 8-7020700-6863 8-8020700-7130 8-2120700-7241 8-2220700-7341 8-0120
700-7441 8-2320700-7648 8-2420700-7961 8-2520701-0600 16-6132701-1200 12-1334701-1400 20-9131701-3500 22-1325701-4400 44-2200701-5500 55-3640702-3500 22-1307
703-3500 22-1343800-0510 10-4373800-0512 10-0413800-0610 16-6210800-0612 16-6111800-0613 16-6112800-0614 16-6213800-0615 16-6114800-0616 16-6215800-0619 16-6217
800-0620 16-6218800-1212 12-1312800-1213 12-1112800-1214 12-1113800-1216 12-1115800-1218 12-1326800-1219 12-1118800-1220 12-1176800-1222 12-1120800-1416 20-9115
800-1418 20-9117800-1419 20-9118800-1420 20-9119800-1422 20-9120800-1423 20-9154800-1424 20-9307800-2622 26-5118800-2624 26-5119800-2628 26-5131800-3516 22-1131
800-3518 22-1132800-3519 22-1129800-3520 22-1133800-3522 22-1118800-3523 22-1178800-3524 22-1120800-3526 22-1338800-3528 22-1316800-4422 44-2256800-4423 44-2360
800-4424 44-2460800-4426 44-2610800-4428 44-2820800-4432 44-3200800-5524 55-2410800-5526 55-2600800-5528 55-2800800-5532 55-3240
800-6108 8-1008800-6110 8-1010800-6510 8-5010800-6511 8-5011800-6722 8-7011800-6822 8-8011800-6824 8-8015800-6828 8-8016800-7610 8-2410800-7922 8-2511
800-7924 8-2515800-8208 8-2008800-8210 8-2010800-8310 8-3010800-8410 8-4010800-8411 8-4011800-8610 8-6010800-8611 8-6011801-0506 10-0431801-0518 10-0411
801-0606 16-6187801-0618 16-6134801-1206 12-1172801-1218 12-1181801-1221 12-1315801-1406 20-9132801-1418 20-9180801-1420 20-9311801-1421 20-9193801-3506 22-1134
801-3506 22-1138801-3518 22-1132801-3521 22-1330801-4406 44-2206801-4421 44-2221802-0616 16-6516802-0618 16-6518802-0620 16-6165802-1216 12-1319802-1218 12-1302
802-1220 12-1330802-1222 12-1320802-1418 20-9318802-1420 20-9317802-1422 20-9160802-1424 20-9320802-3520 22-1145802-3522 22-1337802-3524 22-1162802-6535 8-5016
802-7108 8-2108802-7110 8-2110802-7611 8-2411802-7922 8-2525802-7924 8-2535802-8335 8-3016802-8435 8-4016802-8611 8-6016803-1400 48-9202803-3500 48-1181
804-0512 10-0422804-0514 10-0412804-0516 10-0452804-0612 16-6171804-0614 16-6302804-0616 16-6302804-0618 16-6138804-0620 16-6127
804-1012 10-0422804-1014 10-0412804-1016 10-0452804-1214 12-1170804-1216 12-1163804-1218 12-1148804-1220 12-1321804-1414 20-9310804-1418 20-9183804-1420 20-9127
804-3516 22-1125804-3518 22-1124804-3519 22-1190804-3520 22-1128804-3526 22-1126804-4418 44-1826805-1014 10-3162805-1018 10-0332805-1218 12-1328805-1420 20-9191
806-0514 10-5213806-0516 10-5215806-0518 10-5216806-0520 10-5218806-0614 16-6213806-0616 16-6215806-0618 16-6216806-0620 16-6218806-1216 12-1215806-1218 12-1216
806-1220 12-1218806-1418 20-9216806-1420 20-9218806-3520 22-1218806-3522 22-1219806-4420 44-2045806-4424 44-2456807-0616 16-6616807-5520 55-2836808-0612 16-6176
808-0614 16-6178900-0648 69-0648900-1248 69-1248900-2648 69-2648900-3548 69-2248920-1200 56-2004
WOODS10938 22-2317
110 2-2275115 22-231214061 26-515514065 26-532114066 3-018814105 3-0188148 20-9309154 1-20752437 1-127528920 12-1190
30550 56-185731753 12-118132424 44-222032429 44-220165334 12-233065335 56-300165689 1-0170
N10-28-17 Use 10-2817N10-3-1769X Use 10-1769N10-3-18KX Use 10-0318N10-4-1532 Use 10-1532N10-4-1559 Use 10-1559N10-4-373 Use 10-437315-0615 Use 10-061515-5111 Use 10-041315-5112 Use 10-417315-5113 Use 10-511315-5114 Use 10-047315-5115 Use 10-457315-5116 Use 10-447315-5117 Use 10-415315-5118 Use 10-419315-5123 Use 10-512315-5124 Use 10-049315-5125 Use 10-412315-5129 Use 10-512915-5131 Use 10-513115-5132 Use 10-513215-5134 Use 10-041115-5136 Use 10-494315-5138 Use 10-155715-5148 Use 10-175815-5149 Use 10-514915-5154 Use 10-444315-5156 Use 10-515615-5157 Use 10-032315-5158 Use 10-515815-5159 Use 10-038115-5164 Use 10-449315-5169 Use 10-176515-5171 Use 10-042215-5172 Use 10-043215-5173 Use 10-033215-5174 Use 10-517415-5175 Use 11-107515-5176 Use 10-031215-5178 Use 10-032215-5183 Use 10-031315-5184 Use 10-033315-5185 Use 10-320315-5186 Use 10-0383
15-5187 Use 10-043115-5189 Use 10-041215-5191 Use 10-416315-5193 Use 10-045215-5196 Use 10-414315-5197 Use 10-411315-5199 Use 10-318315-5213 Use 10-521315-5215 Use 10-521515-5216 Use 10-521615-5217 Use 10-157415-8218 Use 10-521815-5275 Use 10-527515-5303 Use 10-530315-5305 Use 10-312215-5313 Use 10-531315-5315 Use 10-046315-5319 Use 10-042315-5322 Use 10-532215-5331 Use 10-533115-5334 Use 10-533415-5335 Use 10-418315-5336 Use 10-437315-5338 Use 10-316315-5339 Use 10-410315-5341 Use 10-176915-5345 Use 10-469315-5347 Use 10-170315-5349 Use 10-170515-5352 Use 10-535215-5354 Use 10-535415-5355 Use 10-170715-5361 Use 10-536115-5363 Use 10-158015-5366 Use 10-536615-5373 Use 10-428215-5374 Use 10-429315-5377 Use 10-316215-5407 Use 10-413715-5409 Use 10-413915-5411 Use 10-541115-5412 Use 10-541215-5430 Use 10-543051-5275 Use 11-1750
1-0675 Use 1-01701-0676 Use 1-01721-0677 Use 1-0171
Neapco 0600 to N1000 Universal Joint Supersession Listing
Neapco 0600 to N1000 PTO Yoke Supersession Listing
top related