Polycorp Mining AG SAG Mill Liners V9
Post on 16-Dec-2015
218 Views
Preview:
DESCRIPTION
Transcript
MIN
ING
Rubber Metal Composite Liners for AG/SAG Mills
Polycorp has a long, successful
heritage in the mining industry
and is recognized as one of the
leading mill liner manufacturers
in the world.
Polycorp has installed liners
in mills up to 32ft/9.8m, and
has supplied Mill Liners for
more than 300 mills worldwide.
A current trend in mineral beneficiation is to leverage
grinding efficiency gains associated with large diameter mills.
However, operating mills of increasing diameter presents
significant liner service life and maintenance challenges.
To meet these challenges, Polycorp offers PolyStl
composite Mill Liners.
PolyStl mill liners are the composite of a proprietary wear
resistant steel and high pressure molded rubber. The abrasion
resistant steel allows for approximately double the service life
of a standard rubber liner, and the rubber structure absorbs
impact from large rocks and grinding media.
Similar liner designs have been used for many years in
AG/SAG mills up to 32ft/9.8m in diameter. Polycorp has
proven the quality of its designs and products via empirical
testing and long service life all over the world.
INNOVATION / QUALITY / SOLUTIONS / TECHNICAL SUPPORT+1-519-846-2075 / +1-800-265-2710 / www.poly-corp.com
Polycorp PolyStl mill liners are suitable for use in the following applications:
p AG (Autogenous Grinding) Mills
p SAG (Semi-Autogenous Grinding) Mills
p Large ball mills (or those using large diameter
grinding media)
Polycorp PolyStl Mill Liners have the following advantages:
p PolyStl liners are usually installed with rubber plates.
This reduces the overall weight of the liner assembly.
Loads on shells, heads, and bearings will be reduced.
p PolyStl liners last longer than steel liners in many
applications, thereby reducing the cost per tonne of
ore processed.
p The sound pressure levels of a PolyStl lined mill are
lower than that of a steel lined mill.
Polycorp Mining Engineering can help you increase mill
reliability and availability, by designing an optimal mill liner
suited specifically to your operating conditions. Polycorp can
help you reduce the cost of your grinding operation today.
High Quality = Reduced Risk = Lower Cost
www.poly-corp.comPOLYCORP LTD. 33 York Street West, Elora ON N0B 1S0 Canada Tel +1-519-846-2075 / Fax +1-519-846-2372 / Toll Free +1-800-265-2710 / mining@poly-corp.com
top related