Transcript
Pigeon Point SystemsWorld-Class Management Solutions for xTCA™ Platforms
2010
When it comes to implementing Telecommunications Computing Architecture (xTCA)hardware platform management solutions, most hardware product vendors prefer to bypass the
hassle of custom building a solution and select an existing proven solution instead. Pigeon Point Systems,
as the dominant supplier of these solutions to leading companies worldwide, is by far the best choice. In
addition to shipping in tens of thousands of boards and shelves and being thoroughly validated by the
largest telecom equipment manufacturers, Pigeon Point solutions have been systematically tested in
dozens of PICMG® xTCA interoperability workshops since 2002, making them the standard against which
other implementations are measured for xTCA interoperability.
The Pigeon Point solutions include Board Management Reference (BMR) Starter Kits based on the Actel SmartFusion™ intelligent
mixed signal FPGA and Fusion mixed signal FPGA as well as Renesas Technology H8S and Atmel AVR® microcontrollers, plus
Shelf Management Mezzanine (ShMM) modules, which provide the core processing and firmware for an AdvancedTCA® (ATCA)
Shelf Manager. The SmartFusion-based solutions support the A2F500 and A2F200 devices, while the Fusion-based solutions
support the Pigeon Point enabled P1AFS1500 and P1AFS600 Fusion devices.
When implementing robust and fully compliant hardware platform management solutions for “always up” hardware, you can do things the Hard Way or the Pigeon Point Way.
The Pigeon Point Way covers all of the xTCA management controller types:
Shelf Manager
IPMC
Shelf-Carrier Manager Interface
Carrier IPMC
MMC
Carrier Manager
MCMC
EMMC
MMC
IPM
B-0
IPM
B-0
IPM
B-L IPM
B-L
Shelf Manager
BMR-A2F-ATCA-SK 5
BMR-P1AFS-ATCA-SK 6
BMR-H8S-ATCA-SK 7
BMR-A2F-AMCc-SKA 5
BMR-P1AFS-AMCc-SKA 6
BMR-H8S-AMCc-SKA 7
BMR-A2F-AMCm-SK-ATCA 9
BMR-H8S-AMCm-SK-ATCA 9
BMR-P1AFS-MCMC-SK 11
BMR-H8S-MCMC-SK 11
BMR-A2F-AMCm-SK-µTCA 12
BMR-H8S-AMCm-SK-µTCA 12
BMR-H8S-EMMC-SK 12
AMC-TSB 13
PM-TSB 13
ShMM-500R 14
ShMM-1500R 14
Architecture Diagram 15
3Refer to www.pigeonpoint.com/products.html for up-to-date details on Pigeon Point management solutions.
IPM Controller (IPMC)
Carrier IPM Controller (Carrier IPMC)
Module Management Controller (MMC)
Ad
vanc
edT
CA
/Ad
vanc
edM
C™
Bo
ard
Man
agem
ent
So
lutio
ns
MicroTCA® Carrier ManagementController (MCMC), with CarrierManager and Shelf Manager
Module Management Controller (MMC)
Enhanced Module ManagementController (EMMC)
Mic
roT
CA
/Ad
vanc
edM
C
Bo
ard
Man
agem
ent
So
lutio
ns
Test Boards
AdvancedTCA Shelf Managers
SmartFusion Intelligent Mixed Signal FPGA
Table of Contents
PayloadInterface(either one)
SCBADCSCBSCB ADCADCSCBSCB
CoreGPIO(latched)
UART-1
EthernetMAC
PayloadUART
LPC
SMBus NC-SI Main
SOLUART
NetworkController
CoreLPC
CoreUART
I2C-0
I2C-1
CorePWM
CoreI2C
CoreGPIO(latched)
VoltageSupervisor
PowerController
BMR-A2F-ATCA/AMCc Reference Design
BMR-A2F-AMCc Only(one AMC site shown)
Legend
PayloadPower
EEPROM(for int. data)
50 MHzOsc.
Digital Temp.Sensor
RTC AdditionalEEPROMs SPI Flash
PHYLAN
I2CBuffers
RTM
Analog Temp.Sensor 2Analog
Temp.Sensor 1
-48 VMonitoring
Circuit
Volta
ge R
eg.
UART-0
ESRAM ENVM
SPI-0
CCC/PLLReset
Controller
A2F200/500
FPGAFabric
Programmable Analog
Payload
Optional Block
Optional Connection
MSS/FPGA GPIO or External GPIO Expander (for the FGG256 Package)
A2F500-Only Block
Brown-Out
Reset
Master-OnlyI2C
ResetButton
Serial DebugInterface FlashPro3/4
JTAG
IPMB-A
IPMB-B
Telco Alarm
Ready, Enable
FRU LEDs
HA, Handle Switch
USER GPIO
IPMB-L IPMB-L
Enable
Control/
Monitoring
To AMCsite X
(AMCx) MP
PWR
Presence/Enable
Payload Reset
SOL Traffic
NC-SI/Ethernet Traffic
SMBus Sideband Interface Traffic
-48 V 1.5 V
3.3 V
5 V
12 V
RTN
Power Control
BlueLED
E-Keying
Fan Control
and Monitoring
ManagementPower (3.3 V)
3.3 V
1.5 V
Pass Transistor
3.3
V C
urre
nt
5 V
Cur
rent
AM
Cx
MP
Cur
rent
AMCx PWR
-48
V C
urre
nt
GP
IO
GP
IOG
PIO
FETSwitches
Cortex-M3Microcontroller
Subsystem
4
Key Functional Benefits Enabled byMicrocontroller Subsystem
Key Functional Benefits Enabled byFlash FPGA Fabric
Key Functional Benefits ofProgrammable Analog
• 32-bit Cortex-M3 operates at 80 MHz,
supporting advanced processing such
as for network protocols
• 10/100 Mbps Ethernet, with Reduced
Media Independent Interface (RMII)
- Compatible with Network ControllerSideband Interface (NC-SI) standard for vendor- and controller-independentsideband Ethernet
- Enables operations and developmentcost reductions, via serial traffic, firmwareupgrade, IPMB trace over LAN
• Platform for future support of in-application
programming for flash FPGA fabric
• IPMI System Interface via CoreLPC
facilitates off-the-shelf IPMI stacks
on payload
• Additional AHB peripherals (e.g., CoreUART)
accessed via CoreLPC from payload can
replace external devices
• Latched CoreGPIO for payload controls
eliminates external latch device
• Extra I2C ports via CoreI2C improve
performance, robustness for IPMB-L
to AMCs
• Custom logic, replacing PLD(s) or
other on-board devices
• Analog Compute Engine (ACE) offloads
Cortex-M3 from analog processing
• Option to augment IPMI analog sensors
with board-specific analog signal
handling, with unified configuration
via MSS configurator
• Ability to monitor up to 32 analog
sensors, overall
• Platform for future support of additional
advanced analog processing, such as
voltage threshold based power rail
sequencing
Leveraging SmartFusion’s Intelligent Integration for IPM Controllers
Hard-logic-implemented, cost-effective, high
performance microcontroller subsystem
based on 32-bit ARM® Cortex™-M3
Optimizations for xTCA management via
flash FPGA fabric, with tiles available for
additional board-specific functions
Advanced analog monitoring with zero load
on Cortex-M3 for analog processing
Ad
va
nc
ed
TC
A/A
dv
an
ce
dM
C B
oa
rd M
an
ag
em
en
t Re
fere
nc
e P
rod
uc
ts
5Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions.Contact Pigeon Point Systems directly for pricing information.
SmartFusion Board Management Reference Starter Kit for AdvancedTCAIPM Controllers
Ordering Code Supported Devices
BMR-A2F-ATCA-SKShips with 484-pin A2F500 by default,256-pin A2F500 if requested, subject toavailability; A2F200 shipped in lieu ofA2F500 initially.
A2F200M3FA2F500M3G
Pigeon Point AdvancedTCA /AdvancedMC BoardManagement Reference Products
BMR-A2F-ATCA-SK: a completesolution for implementing acompliant and interoperable IPM Controller (IPMC), including:
• Complete Actel Libero® IntegratedDesign Environment (IDE) designfor SmartFusion intelligent mixed signal FPGA
• Schematics and bill-of-materialsfor SmartFusion-based IPMC
• Comprehensive user’s guide,hardware architecture andsoftware architecture documents
• Pigeon Point IPMC firmware,including source code anddevelopment tools, supporting all mandatory and many optional Intelligent PlatformManagement Interface (IPMI)/ATCA commands, plus numerousPPS extension commands
• BMR-A2F-ATCA-BTR benchtop board
• Pigeon Point ShMM-500R-basedbenchtop Shelf Manager, whichcan be cabled together with ATCA benchtop board to form a two-node (or larger) benchtopATCA IPMI network, enabling you to begin ramping up onAdvancedTCA’s IPMI-basedmanagement framework withoutwaiting for your custom hardware
BMR-A2F-ATCA-BTR AdvancedTCA/AdvancedMC (AMC) benchtopdevelopment board, including:
• Mezzanine-implementedSmartFusion core IPMC for flexibility
- Mezzanine modules available for 256-pin or 484-pin IPMCimplementations
• LEDs and switches forconfiguration, state signaling, and control, plus robust selectionof headers and connectors
• On-board dedicated prototyping area
• RoHS compliant
Additional hardware to support use of the BMR-A2F-ATCA-BTRbenchtop board with the add-onfacilities of the BMR-A2F-AMCcCarrier IPMC solution (see next entry):
• AMC slot with connector andguide to attach a customer AMCfor development and testing
• Complete on-board AVR-basedModule Management Controller(MMC) simulating a second AMC site
• Connection for an AMC Test SiteBoard (AMC-TSB) to connect anadditional customer-supplied AMC module
- AMC-TSB available separately
IPMC
SmartFusion Board Management Reference Starter Kit Add-On forAdvancedMC Carrier IPM Controllers
BMR-A2F-AMCc-SKA: augments the BMR-A2F-ATCA-SK Starter Kit toenable development of compliant and interoperable Carrier IPM Controllers (Carrier IPMCs), including:
• Augmented Libero IDE design for a complete SmartFusion-based Carrier IPMC
• Augmented schematics and bill-of-materials for SmartFusion-based Carrier IPMC hardware
• Benchtop Shelf Manager and Carrier IPMC hardware (from the separatelypurchased BMR-A2F-ATCA-SK); see previous listing for details
• Comprehensive user’s guide, hardware architecture and softwarearchitecture documents
• Pigeon Point Carrier IPMC firmware, including source code anddevelopment tools, supporting all mandatory and many optionalIPMI/ATCA commands, plus numerous PPS extension commands
Carrier IPMC
Ordering Code Supported Devices
BMR-A2F-AMCc-SKA A2F200M3FA2F500M3G
Ad
va
nc
ed
TC
A/A
dv
an
ce
dM
C B
oa
rd M
an
ag
em
en
t R
efe
ren
ce
Pro
du
cts
6Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions. Contact Pigeon Point Systems directly for pricing information.
Fusion Board Management Reference Starter Kit for AdvancedTCA IPM Controllers
Ordering Code Supported Devices
BMR-P1AFS-ATCA-SK(ships with 484-pin P1AFS1500 by default, 256-pin P1AFS1500 if requested)
P1AFS600-2P1AFS1500-2
BMR-P1AFS-ATCA-SK: a completesolution for implementing acompliant and interoperable IPM Controller (IPMC), including:
• Complete Actel Libero IDE designfor Fusion mixed signal FPGA
• Schematics and bill-of-materialsfor Fusion-based IPMC
• Comprehensive user’s guide,hardware architecture andsoftware architecture documents
• Pigeon Point IPMC firmware,including source code anddevelopment tools, supporting all mandatory and many optional Intelligent PlatformManagement Interface (IPMI)/ATCA commands, plus numerousPPS extension commands
• BMR-P1AFS-ATCA-BTR benchtop board
• Pigeon Point ShMM-500R-basedbenchtop Shelf Manager, whichcan be cabled together with ATCA benchtop board to form a two-node (or larger) benchtopATCA IPMI network, enabling you to begin ramping up onAdvancedTCA’s IPMI-basedmanagement framework withoutwaiting for your custom hardware
BMR-P1AFS-ATCA-BTRAdvancedTCA/AdvancedMC (AMC)benchtop development board,including:
• Mezzanine-implemented Fusioncore IPMC for flexibility
- Mezzanine modules available for 256-pin or 484-pin IPMCimplementations (the lattersupporting external SRAM)
• LEDs and switches forconfiguration, state signaling, and control, plus robust selectionof headers and connectors
• On-board dedicated prototyping area
• RoHS compliant
Additional hardware to support useof the BMR-P1AFS-ATCA-BTRbenchtop board with the add-onfacilities of the BMR-P1AFS-AMCcCarrier IPMC solution (see next entry):
• AMC slot with connector andguide to attach a customer AMCfor development and testing
• Complete on-board AVR-basedModule Management Controller(MMC) simulating a second AMC site
• Connection for an AMC Test SiteBoard (AMC-TSB) to connect anadditional customer-supplied AMC module
- AMC-TSB available separately
IPMC
Fusion Board Management Reference Starter Kit Add-On for AdvancedMCCarrier IPM Controllers
BMR-P1AFS-AMCc-SKA: augments the BMR-P1AFS-ATCA-SK Starter Kit to enable development of compliant and interoperable Carrier IPM Controllers (Carrier IPMCs), including:
• Augmented Libero IDE design for a complete Fusion-based Carrier IPMC
• Augmented schematics and bill-of-materials for Fusion-based Carrier IPMC hardware
• Benchtop Shelf Manager and Carrier IPMC hardware (from the separatelypurchased BMR-P1AFS-ATCA-SK); see previous listing for details
• Comprehensive user’s guide, hardware architecture and softwarearchitecture documents
• Pigeon Point Carrier IPMC firmware, including source code anddevelopment tools, supporting all mandatory and many optionalIPMI/ATCA commands, plus numerous PPS extension commands
Ordering Code Supported Devices
BMR-P1AFS-AMCc-SKA P1AFS600-2FGG484P1AFS1500-2FGG484
Carrier IPMC
Pigeon Point AdvancedTCA /AdvancedMC Board Management Reference Products (cont.)
Ad
va
nc
ed
TC
A/A
dv
an
ce
dM
C B
oa
rd M
an
ag
em
en
t Re
fere
nc
e P
rod
uc
ts
7Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions.Contact Pigeon Point Systems directly for pricing information.
BMR-H8S-AMCc-SKA Board Management Starter Kit Add-On for AdvancedMCCarrier IPM Controllers
Augments the Pigeon Point BMR-H8S-ATCA IPM Controller solution withthe additional hardware and firmware needed to implement a Carrier IPMCon an AMC carrier board. Kit includes:
• Augmented schematics covering Carrier IPMC hardware, ready forintegration/adaptation into the design of your ATCA-based AMC carrier board
• Corresponding Carrier IPMC firmware, delivered in source form—ready forsimple and quick adaptation to the specific requirements of your product
• Benchtop Shelf Manager and Carrier IPMC hardware (from the separatelypurchased BMR-H8S-ATCA Starter Kit), allowing you to ramp up onIPMI-based management without waiting for your custom hardware
Ordering Code Core Silicon
BMR-H8S-AMCc-SKA H8S
Carrier IPMC
BMR-H8S-ATCA-SK Board Management Starter Kit for AdvancedTCA IPM Controllers
A complete hardware and firmwaresolution for the mandatory IPMController on AdvancedTCA boardsand other intelligent FRUs, such as fan trays or power entry modules (PEMs). Kit includes:
• Schematics for a complete IPM Controller subsystem, readyfor integration/adaptation into the design of your board or other intelligent field replaceableunit (FRU) such as a fan tray or PEM
• Firmware for that subsystem,delivered in source form and with development tools—ready for simple and quick adaptation to the specific requirements of your product
• Benchtop Shelf Manager and IPM Controller hardware so thatyou can immediately begin theramp-up process on AdvancedTCA’sIPMI-based managementframework, without waiting for your custom hardware
Ordering Code Core Silicon
BMR-H8S-ATCA-SK H8S
IPMC
PayloadInterface(either one)
SCBSCBADC ADCSCBSCB
CoreGPIO(latched)
UART-1
EthernetMAC
PayloadUART
LPC
SMBus NC-SI Main
SOLUART
NetworkControllerCoreLPC
CoreUART
I2C-0
CoreGPIO
VoltageSupervisor
SwitchingVoltage
Regulator
BMR-A2F-AMCm Reference Design
Legend
PayloadPower
EEPROM(for int. data) 50 MHz
Osc.
Digital Temp.Sensor
RTCAdditionalEEPROMs SPI Flash
PHYLAN
Analog Temp.Sensor
UART-0SPI-0 CCC/PLL
ResetController
A2F200
Cortex-M3Microcontroller
Subsystem
FPGAFabric
Programmable Analog
Payload
Optional Block
Optional Connection
MSS/FPGA GPIO (depending on package type)
Brown-Out
Reset
Master-OnlyI2C
ResetButton
Serial DebugInterfaceFlashPro3/4
JTAG
FRU LEDs
IPMB-L
ENABLE#
HA, Handle Switch
USER GPIO
Payload Reset
SOL Traffic
NC-SI/Ethernet Traffic
SMBus Sideband Interface Traffic
1.8 V
3.3 V
5 V
PowerControlBlue
LED
E-Keying
GA[2:0]
GAPULLUP
To/F
rom
th
e C
arri
er
ManagementPower (3.3 V)
PS1#
PS0#
PayloadPower (12 V)
3.3 V
1.5 V
PP Voltage
Scaled to0...2.5 V 3.
3 V
Cur
rent
MP
Vol
tage
1.8
V V
olta
ge
3.3
V V
olta
ge
5 V
Vol
tage
GP
IO
GP
IO
CC t MM3
ESRAM ENVM
8
Key Functional Benefits Enabled byMicrocontroller Subsystem
Key Functional Benefits Enabled byFlash FPGA Fabric
Key Functional Benefits of Programmable Subsystem
• 32-bit Cortex-M3 operates at 40 MHz,
supporting advanced processing such
as for network protocols
• 10/100 Mbps Ethernet, with Reduced
Media Independent Interface (RMII)
- Compatible with Network ControllerSideband Interface (NC-SI) standard for vendor- and controller-independentsideband Ethernet
- Enables operations and developmentcost reductions, via serial traffic, firmwareupgrade, IPMB trace over LAN
• Platform for future support of in-application
programming for flash FPGA fabric
• IPMI System Interface via CoreLPC
facilitates off-the-shelf IPMI stacks
on payload
• Additional AHB peripherals (e.g., CoreUART)
accessed via CoreLPC from payload can
replace external devices
• Latched CoreGPIO for payload controls
eliminates external latch device
• Custom logic, replacing PLD(s) or other
on-board devices
• Analog Compute Engine (ACE) offloads
Cortex-M3 from analog processing
• Option to augment IPMI analog sensors
with board-specific analog signal
handling, with unified configuration
via MSS configurator
• Ability to monitor up to 32 analog
sensors, overall
• Platform for future support of additional
advanced analog processing, such as
voltage threshold based power rail
sequencing
Leveraging SmartFusion’s Intelligent Integration for Module Management Controllers
Hard-logic-implemented, cost-effective, high
performance microcontroller subsystem
based on 32-bit ARM Cortex-M3
Optimizations for xTCA management via
flash FPGA fabric, with tiles available for
additional board-specific functions
Advanced analog monitoring with zero load
on Cortex-M3 for analog processing
Ad
va
nc
ed
TC
A/A
dv
an
ce
dM
C B
oa
rd M
an
ag
em
en
t Re
fere
nc
e P
rod
uc
ts
9Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions.Contact Pigeon Point Systems directly for pricing information.
BMR-A2F-AMCm Board Management Starter Kit for AdvancedMC ModuleManagement Controllers in AdvancedTCA Contexts
A complete hardware and firmwaresolution for the mandatory MMC onAMC modules, compatible with eitherATCA carriers or MicroTCA shelves,but with AdvancedTCA benchtopsupport. Kit includes:
• Complete Actel LIbero IDE design for SmartFusion intelligent mixed signal FPGA
• Schematics for a complete SmartFusion-based MMCsubsystem, ready for integration/adaptation into the design of your AMC
• Firmware for that subsystem,delivered in source form and withdevelopment tools—ready forsimple and quick adaptation to the specific requirements of your product
• Benchtop SmartFusion-basedMMC, implemented as AMC formfactor board that can be insertedin any compliant AMC slot, withdebug facilities extending in frontof the carrier
• Benchtop AdvancedTCA ShelfManager, SmartFusion-basedCarrier IPM Controller (CarrierIPMC), so that you canimmediately begin the ramp-upprocess on the IPMI-basedmanagement framework of theAdvancedTCA and AdvancedMCspecifications, without waiting for custom hardware
Ordering Code Core Silicon
BMR-A2F-AMCm-SK-ATCA A2F200M3F
MMC
BMR-H8S-AMCm Board Management Starter Kit for AdvancedMC ModuleManagement Controllers in AdvancedTCA Contexts
A complete hardware and firmwaresolution for the mandatory MMC onAMC modules, compatible with eitherATCA carriers or MicroTCA shelves,but with AdvancedTCA benchtopsupport. Kit includes:
• Schematics for a complete MMC subsystem, ready forintegration/adaptation into thedesign of your AMC
• Firmware for that subsystem,delivered in source form and withdevelopment tools—ready forsimple and quick adaptation to the specific requirements of your product
• Benchtop MMC, implemented asAMC form factor board that canbe inserted in any compliant AMC slot, with debug facilitiesextending in front of the carrier
• Benchtop AdvancedTCA ShelfManager, Fusion-based CarrierIPM Controller (Carrier IPMC), sothat you can immediately begin theramp-up process on the IPMI-basedmanagement framework of theAdvancedTCA and AdvancedMCspecifications, without waiting forcustom hardware
A corresponding AdvancedMC MMC solution based on the Atmel AVR microcontroller is also available. Please contact Pigeon Point Systems for details.
Ordering Code Core Silicon
BMR-H8S-AMCm-SK-ATCA H8S
MMC
Pigeon Point AdvancedTCA /AdvancedMC Board Management Reference Products (cont.)
CoreGPIO
CoreGPIO(latched)
Payload UART
LPC Host Payload
CoreMemCtrl
CoreGPIO
CoreUART
SRAMBlocks ENVM
CoreI2Cx2
CoreI2Cx13
CoreUARTCoreUART
CoreGPIO
CoreGPIO
Osc. 25 MHz
PayloadPower
MOSFETs
LVDS
I2C Buffers
Pull-Up Switch
ExternalSRAM
Core10100
CoreUART
CoreLPC
PHY
P1AFS1500
ShM DebugInterface
Serial DebugInterface
JTAGInterface
Ethernet
Telco AlarmInterface
User GPIO
IRQ DigitalThermalSensor
RTC
ExternalEEPROM
Battery SuperCap
XOVER1
XOVER[0,2]
IPMB-0
IsolationSwitches
IPMB-L[12...0]
ExtWDT
AnalogTemperature
Sensor
.......
Reset andEarly
Power-UpLogic
VoltageSupervisior
CoreABC CoreAI
Analog Offload Subsystem
VoltageRegulators
Shared MP
ENABLE#
PWR_ON
HandleSwitch
FRULEDs
Blue LED
PS1#
PS0#
PayloadPower
BMR-P1AFS-MCMC Reference Design
3.3 V
1.5 V
GA[2...0]
CarrierFRU I2C
GA_PULLUP
Ready, Enable
Enable[12...0]
5 V
3.3
V
1.5
V
Fabric and Clock E-Keying Controls
Payload Reset
Voltage Sensors
Current Sensors
Payload Power Controls
Reset
Po
we
r
Fro
m t
he
Bac
kpla
ne
Fro
nt
Pan
elF
rom
th
e B
ackp
lan
e
Analog Quads
Cortex-M1Controller
PayloadInterface(either one)
Legend
Optional Block
Optional Connection
10
Key Functional Benefits Enabled bySoft Controller Subsystem
Key Functional Benefits Enabled byFlash FPGA Fabric
Key Functional Benefits of Analog Subsystem
• 32-bit ARM Cortex-M1 core operates
at 33.3 MHz
• Data in external SRAM, supplemented
by FPGA SRAM blocks
• Executable code and configuration data
stored on-chip in 1 MB of ENVM
• Extensive soft core integration replaces
numerous off-chip devices needed with
conventional microcontroller
• Separate I2C channels for all 13 IPMB-L
legs as well as IPMB-0 helps performance,
robustness
• IPMI System Interface via CoreLPC
enables generic IPMI stack on payload
• Latched CoreGPIO for payload controls
eliminates external latch device
• Custom logic, replacing PLD(s) or other
on-board devices
• Soft core analog offload subsystem does
IPMI- and xTCA-aware analog sensor
threshold processing without requiring
any cycles from the Cortex-M1
• Hard-logic-implemented analog quads
provide analog front-end facilities for
measuring voltages, currents, temperatures
• Ability to monitor up to 30 analog
sensors, overall
Leveraging Fusion Mixed Signal FPGAs for MicroTCA Carrier Management Controllers
Soft-core-implemented, 32-bit Cortex-M1
processor in FPGA fabric, attached to
soft core peripheral blocks
Soft cores in flash FPGA fabric provide
basic functions and optimizations for
xTCA management, with tiles available
for board-specific functions
Soft-core-implemented analog offload
subsystem works with zero load on
Cortex-M1, interfacing with hard-logic-
implemented analog quads
Mic
roT
CA
/Ad
va
nc
ed
MC
Bo
ard
Ma
na
ge
me
nt R
efe
ren
ce
Pro
du
cts
11Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions.Contact Pigeon Point Systems directly for pricing information.
Fusion Board Management Starter Kit for MicroTCA CarrierManagement Controllers
A complete solution for implementinga MicroTCA Carrier ManagementController (MCMC) subsystem,including the Pigeon Point µCarrier Manager™ and Pigeon PointµShelf Manager™. Kit Includes:
• Complete Libero IDE design forFusion mixed signal FPGA
• Schematics and bill-of-materialsfor a complete MCMC, ready forintegration into your MicroTCACarrier Hub (MCH)
• Firmware in source form for ARM Cortex-M1 processor,supporting all mandatory and many optional IPMI/MicroTCA commands
• Comprehensive user’s guide,hardware architecture andsoftware architecture documents
Benchtop development board,including:
• BMR-P1AFS-MCMC referenceimplementation, complete with µShelf Manager
• On-board AdvancedMC ModuleManagement Controller (MMC)based on the Pigeon Point BMR-AVR-AMCm reference design
• On-board emulated minimalcommand set Power ModuleEnhanced Module ManagementController (EMMC)
• Rich collection of headers,switches, and connectors
• Connections for optional PigeonPoint AMC Test Site Board andPower Module Test Site board toenable testing with user-suppliedAMC or up to two Power Modules
• RoHS compliant
Ordering Code Supported Devices
BMR-P1AFS-MCMC-SK P1AFS1500-2FGG484
Pigeon Point MicroTCA/AdvancedMC Board ManagementReference Products
BMR-H8S-MCMC-SK Board Management Starter Kit for MicroTCA CarrierManagement Controllers
A complete hardware and firmware solution for the mandatoryMicroTCA Carrier ManagementController (MCMC) on a MicroTCACarrier Hub (MCH), which includesthe MCMC, Carrier Manager, and anoptionally installed Shelf Manager, all executing on a singlemicrocontroller. Kit includes:
• Schematics for a complete MCMC subsystem (includingPigeon Point µCarrier Managerand Pigeon Point µShelf Manager),ready for integration/adaptationinto the design of your MicroTCACarrier Hub (MCH)
• Firmware for that subsystem,delivered in source form and withdevelopment tools—ready forsimple and quick adaptation tothe specific requirements of yourproduct and configurable toexecute on a single Renesas H8S/2166 controller
• Benchtop MCMC and supportinghardware so that you canimmediately begin the ramp-upprocess on the MicroTCA IPMI-based managementframework, without waiting for your custom hardware
Ordering Code Core Silicon
BMR-H8S-MCMC-SK H8S
MCMC
MCMC
Mic
roT
CA
/Ad
va
nc
ed
MC
Bo
ard
Ma
na
ge
me
nt
Re
fere
nc
e P
rod
uc
ts
12Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions. Contact Pigeon Point Systems directly for pricing information.
Pigeon Point MicroTCA/AdvancedMC Board Management Reference Products (cont.)
BMR-H8S-EMMC-SK Board Management Starter Kit for MicroTCA EnhancedModule Management Controllers
A complete hardware and firmwaresolution for the mandatory EnhancedModule Management Controller(EMMC) on MicroTCA modules suchas OEM modules or cooling units. Kit includes:
• Schematics for a complete EMMCsubsystem, ready for integration/adaptation into the design of yourMicroTCA module, such as acooling unit or OEM module
• Firmware for that subsystem,delivered in source form and withdevelopment tools—ready forsimple and quick adaptation to the specific requirements of your product
• Benchtop EMMC and supportinghardware so that you canimmediately begin the ramp-upprocess on MicroTCA’s IPMI-basedmanagement framework, withoutwaiting for your custom hardware
• BMR-H8S-EMMC-SK includesbenchtop MCMC board
Ordering Code Core Silicon
BMR-H8S-EMMC-SK H8S
EMMC
BMR-A2F-AMCm Board Management Starter Kit for AdvancedMC ModuleManagement Controllers in MicroTCA Contexts
A complete hardware and firmware solution for the mandatory MMC onAMC modules, compatible with either ATCA carriers or MicroTCA shelves,but with MicroTCA benchtop support. Kit includes:
• Complete Actel LIbero IDE design for SmartFusion intelligent mixedsignal FPGA
• Benchtop SmartFusion-based MMC, implemented as AMC form factorboard that can be inserted in any compliant AMC slot (including in aMicroTCA shelf), with debug facilities extending in front; see AdvancedTCAcontext listing on pages 8 and 9 for an extensive block diagram of thisreference design and a photo of the corresponding benchtop board
• Schematics for a complete SmartFusion-based MMC subsystem, readyfor integration/adaptation into the design of your AMC
• Firmware for that subsystem, delivered in source form and withdevelopment tools—ready for simple and quick adaptation to thespecific requirements of your product
• Fusion-based benchtop MicroTCA Shelf Manager and Carrier Manager, plusan AMC Test Site Board, so that you can immediately begin the ramp-upprocess on the IPMI-based management framework of the MicroTCA andAdvancedMC specifications, without waiting for custom hardware
Ordering Code Core Silicon
BMR-A2F-AMCm-SK-µTCA A2F200M3F
MMC
BMR-H8S-AMCm Board Management Starter Kit for AdvancedMC ModuleManagement Controllers in MicroTCA Contexts
A complete hardware and firmware solution for the mandatory MMC onAMC modules, compatible with either ATCA carriers or MicroTCA shelves,but with MicroTCA benchtop support. Kit includes:
• Benchtop MMC, implemented as AMC form factor board that can beinserted in any compliant AMC slot (including in a MicroTCA shelf), withdebug facilities extending in front; see AdvancedTCA context listing onpage 9 for photo of BMR-H8S-AMCm benchtop board
• Schematics for a complete MMC subsystem, ready for integration/adaptation into the design of your AMC
• Firmware for that subsystem, delivered in source form and withdevelopment tools—ready for simple and quick adaptation to thespecific requirements of your product
• Fusion-based benchtop MicroTCA Shelf Manager and Carrier Manager, plusan AMC Test Site Board, so that you can immediately begin the ramp-upprocess on the IPMI-based management framework of the MicroTCA andAdvancedMC specifications, without waiting for custom hardware
A corresponding AdvancedMC MMC solution based on the Atmel AVRmicrocontroller is also available. Please contact Pigeon Point Systems for details.
Ordering Code Core Silicon
BMR-H8S-AMCm-SK-µTCA H8S
MMC
Te
st B
oa
rd P
rod
uc
ts
13Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions.Contact Pigeon Point Systems directly for pricing information.
AMC Test Site Board
• Can be cabled to the BMR-P1AFS-MCMC benchtopboard to allow connecting aphysical AMC supplied by customer
• Can be connected to other BMR benchtop boards such as the Fusion ATCA board (BMR-P1AFS-ATCA-BTR) to attach a physical AMC
• Contact Pigeon Point Systems for specific additional AMC-TSBcompatible boards
• Management and payload powerfor the attached AMC drawn fromseparate ATX +12 V feed
Power Module Test Site Board
• Can be cabled to the BMR-P1AFS-MCMC benchtopboard to allow connecting up totwo physical Power Modules (PMs)
• Allows powering key parts ofbenchtop configuration (includingMCMC and the emulated andactual AMCs) from the PMs
• Implements PM interconnectstypically provided by a MicroTCA backplane
Ordering Code Price
PM-TSB Contact Pigeon Point Systems
Ordering Code Price
AMC-TSB Contact Pigeon Point Systems
Pigeon Point Test Board Products
Test Board
Test Board
Ad
va
nc
ed
TC
A S
he
lf M
an
ag
em
en
t P
rod
uc
ts
14Refer to www.pigeonpoint.com/products.html#board for up-to-date details on Pigeon Point board management solutions. Contact Pigeon Point Systems directly for pricing information.
ShMM-500R Shelf Management Mezzanine
• AdvancedTCA Shelf Manager core in SO-DIMM form factor
• 333 MHz MIPS® processor, theNetLogic Microsystems Au1550™
• 64 or 128 MB of SDRAM
• 32 or 64 MB of flash for programand data storage (configured with 64 and 128 MB of SDRAM,respectively)
- Two copies of key partitions to support reliable upgrades
• Dual IPMB, Ethernet, and serial interfaces
• 67.60 mm x 50.80 mm fullycompliant SODIMM mechanicals
• Maximum power less than 5 W at 3.3 V
• Includes Pigeon Point ShelfManager firmware and MontereyLinux, pre-loaded in flash
• When integrated with a suitablecarrier, ShMM-500R complies withPICMG 3.0 R3.0 and IPMI v1.5,document revision 1.1, plusrelevant errata and selectedextensions from IPMI 2.0
• Thoroughly tested at PICMG xTCA interoperability workshops
• Pigeon Point ShMMs manage tensof thousands of ATCA shelvesthroughout the world and havebeen extensively and successfullytested by major networkequipment providers
Ordering Codes Core Silicon
ShMM-500R-333M32F64RShMM-500R-333M64F128R
Au1550
ShMM-1500R Shelf Management Mezzanine
• AdvancedTCA Shelf Manager core in mezzanine form factor
• 250 MHz superscalar PowerPC®
processor, the Freescale™ MPC8343
• 64 or 128 MB of SDRAM
• 32 or 64 MB of flash for programand data storage (configured with 64 and 128 MB of SDRAM,respectively)
- Two copies of key partitions to support reliable upgrades
• Dual IPMB, Ethernet, and serial interfaces
• 92.0 mm x 50.80 mm mezzanine
• Maximum power less than 6.3 W at 3.3 V
• Includes Pigeon Point ShelfManager firmware and MontereyLinux, pre-loaded in flash
• When integrated with a suitablecarrier, ShMM-1500R complies withPICMG 3.0 R3.0 and IPMI v1.5,document revision 1.1, plusrelevant errata and selectedextensions from IPMI 2.0
• Thoroughly tested at PICMG xTCA interoperability workshops
• Pigeon Point ShMMs manage tensof thousands of ATCA shelvesthroughout the world and havebeen extensively and successfullytested by major networkequipment providers
Ordering Codes Core Silicon
ShMM-1500R-250M32F64RShMM-1500R-250M64F128R
MPC8343
Pigeon Point AdvancedTCA Shelf Management Products
ATCA Shelf Manager
ATCA Shelf Manager
Microcontroller Subsystem
Programmable Analog
FPGA Fabric
SRAM SRAM SRAM SRAM SRAM SRAM
SysReg
ENVM
10/100EMAC
ESRAM
Timer2
Timer1
APB
I2C 2
UART 2
SPI 2
DAC(SDD)
DAC(SDD)
PPB
........
........
....
....
....
VersaTiles
3 V
I2C 1
UART 1
SPI 1
IAP PDMA APB EMC
AHB Bus Matrix
EFROM
APB
Sample SequencingEngine
Post ProcessingEngine
ADC
Analog ComputeEngine
PLL
Supervisor
WDT
OSC
32 KHz
RC+
–
RTC
JTAG
Cortexô -M3
SWD
NVIC SysTick
MPU
S D I
Volt Mon.(ABPS)
Temp.Mon.
SCB
Curr.Mon.
Comparator
ADC
Volt Mon.(ABPS)
Temp.Mon.
SCB
Curr.Mon.
Comparator
....
....
....
....
SmartFusion ArchitectureAlong with microcontroller (MCU), FPGA and analog, SmartFusion intelligent mixed signal FPGAs integrate substantial flash and SRAM memory and
comprehensive clock generation and management circuitry. SmartFusion architecture enables data storage and execution of code from a single monolithic
device. In addition, in-application programming (IAP) enables real-time updates and reprogramming of the complete chip. Design compromises that were
inevitable with traditional fixed-function microcontrollers and FPGAs are eliminated when designing with SmartFusion devices.
No-Compromise Microcontroller Subsystem (MSS) Programmable Analog No-Compromise FPGA Fabric
• Hardwired industry-standard 100 MHz,
32-bit ARM Cortex-M3 CPU
• Multi-layer AHB communication matrix
with up to 16 Gbps throughput
• 10/100 Ethernet MAC with RMII interface
• Two of each: SPI, I2C, UART, 32-bit timers
• Up to 512 KB flash and 64 KB of SRAM
• External memory controller (EMC)
• 8-channel DMA controller
• Up to 41 MSS I/Os with Schmitt
Trigger inputs- 25 I/Os can be used as FPGA I/Os
• High-performance analog signal
conditioning blocks (SCB) with voltage,
current and temperature monitors
• Analog compute engine (ACE) offloads
CPU from analog initialization and
processing of ADC, DAC, and SCBs
• Integrated ADCs and DACs with
1 percent accuracy
• 12/10/8-bit mode ADCs with 500/550/600
Ksps sampling rate
• Up to ten 50 ns high-speed comparators
• Up to 32 analog inputs and 3 outputs
• Based on Actel’s proven ProASIC3®
architecture
• 60,000 to 500,000 system gates with
350 MHz system performance
• Embedded SRAMs and FIFOs- Variable aspect ratio 4,608-bit
SRAM blocks- x1, x2, x4, x9 and x18 organizations- True dual-port SRAM (excluding x18)
• Up to 128 FPGA I/Os supporting LVDS,
PCI, PCI-X, and LVTTL/LVCMOS
standards
Sm
artF
us
ion
15
©2010 Actel Corporation. All rights reserved. Actel, Actel Fusion, IGLOO, Libero, Pigeon Point, ProASIC, SmartFusion, µShelf Manager, µCarrier Manager, and the associated logos are trademarks or registeredtrademarks of Actel Corporation or Pigeon Point Systems, an Actel company. All other trademarks and service marks are the property of their respective owners. 55700044-2/5.10
Pigeon Point SystemsP.O. Box 66989Scotts Valley, CA 95067-6989 USAPHONE 831.438.1565FAX 831.438.3709WEB www.pigeonpoint.com
Pigeon Point is the leader in hardware platform management solutions for xTCA. Choose the Pigeon Point Way for your xTCA products. Learn more at www.pigeonpoint.com.
Actel is the leader in low power FPGAs and mixed signal FPGAs and offers the most comprehensive portfolio of system- and power-management solutions. Learn more at www.actel.com.
For more information regarding Actel products and Pigeon Point board management solutions, please contactyour local Actel sales representative. For more information regarding Pigeon Point AdvancedTCA shelfmanagement solutions, contact Pigeon Point Systems directly.
You May Be Interested In:Solutions and IP Catalog: www.actel.com/documents/IPPIB.pdf
SmartFusion Product Brochure: www.actel.com/documents/SmartFusion_PIB.pdf
Fusion Product Brochure: www.actel.com/documents/Fusion_PIB.pdf
Actel Corporation 2061 Stierlin CourtMountain View, CA 94043-4655 USA PHONE 650.318.4200 FAX 650.318.4600
Actel Europe Ltd. River Court, Meadows Business ParkStation Approach, BlackwaterCamberley Surrey GU17 9AB United Kingdom PHONE +44 (0) 1276 609 300 FAX +44 (0) 1276 607 540
Actel Japan EXOS Ebisu Building 4F1-24-14 Ebisu Shibuya-kuTokyo 150, Japan PHONE +81 03.3445.7671 FAX +81 03.3445.7668 WEB http://jp.actel.com
Actel Hong Kong Room 2107, China Resources Building26 Harbour RoadWanchai, Hong Kong PHONE +852 2185 6460 FAX +852 2185 6488 WEB www.actel.com.cn
top related