Passive infrared based human detection alive robot
Post on 07-May-2015
5304 Views
Preview:
DESCRIPTION
Transcript
Passive infrared BASEDhuman detection alive robot
Guided by :-Prof. Smita Mohanty
Team Members :-
1. Sidharth Mahapatra2. Sandip Kumar
Mohapatra3. Soumya Smita Sahoo4. Smruti Ranjita Suar5. Swastika Dash
Reasons for choosing this project :-
1. The goal of this research was to provide a low cost rescue robot for human detection in a disaster environment.
2. Though, the existing Urban Search and Rescue Robots are equipped with various sensors, but the problem with them is the cost.
3. The sensors used in the development of this project are easily available and cost effective.
Project details :- In this project, a new method for detecting surviving humans in destructed environments using simulated autonomous robot is proposed.
The robot uses two levels of sensing in order to achieve higher cost-effectiveness in the detecting process in terms of the actual cost of equipment, the processing cost, the communication cost, the storage cost, and the power cost.
The first level is a PIR sensor used with a temperature sensor, that is used as the primary sensor in order to detect the existence of living humans in a scene.
The second level is a human body shape sensor. This level uses low-cost web camera in order to confirm the existence of a human shape.
The robot is assumed to be equipped with a simple Temperature sensor in order to detect fire in Rescue scenario and a wireless communication link in order to communicate with the rescue team whenever a need arises.
Project details :-
BLOCK DIAGRAM
PASSIVE INFRA-RED SENSOR
What is PIR sensor ?
How it works ?
Why PIR sensors ?
AT89C51 MICROCONTROLLER
LCD DISPLAY
The basic operations of LCD is done by the following pins :-
Enable (E) Read/Write (R/W) Register select (RS)
1
2
3
VS
S
VD
D
VE
E
4
5
6
RS
RW
E
7 8 9
10
11
12
13
14
D0
D1
D2
D3
D4
D5
D6
D7
LCD1 LM 016L
10k
2,15
1,16
POWER SUPPLY CKT.
LED
LED
1k
- +
IN4007 * 4
GND
9-0-9Vac/1Amp
1000uF/35V
7812
POWER SUPPLY
+5V
+12V230VAC
50Hz 2.2k
7805
TRANSFORMER
Ultrasonic Sensor
What is Ultrasonic Sensor ?
Why it is used ?
How it works?
Analog to Digital Converter
What is ADC ?
Why ADC is needed ?
How it works ?
Software & Hardware used :-
Windows 2000 & onwards version Embedded c Keil software Proteus software
The Robot is equipped with following hardware :
A PIR sensor. An ultrasonic sensor. A Temperature sensor. A Microcontroller unit. A webcam. Motor.
Materials Availability - Cost & Procurement Strategy :-
The instruments used in this project are common electronic devices and easily available.
Low cost and easy to use.
Lab setup:-
Hardware (to connect microcontroller) Pony Prog (Serial, Parallel) AVRdude (supports many hardware) USB-ASP (USB)
Code Vision AVR (CVAVR):
An IDE has following functions: Preprocessing Compilation Assembly Linking Object Translation
Applications
1. In military applications to detect the presence of human being.
2. In Rescue operations where human reach is not possible.
3. In War fields, to control unmanned aerial vehicles(UAV).
Future enhancement :-
Since the system developed is a low cost system therefore it has a wide future scope.
Though many systems with a wide range of sensors have been developed, but there are many problems faced by them such as cost, size, environment difficulties etc.
Future works:-
Detail study about the microcontroller to be used.
Interfacing the peripheral devices with microcontroller.
Detail study on the sensors to be used and their interfacing.
Connection of the circuits used with sensors and microcontroller unit.
Bibliography :- Circuitstoday.com/powersupplyckt.jpeg
Wikipedia.com/sensors/pirsensors.html
Edaboard.com/r6507.html
Pissokas, John and Malcolm, Chris (2001) “Experiments with Sensors for Urban Search and Rescue Robots”
Greer, Kerrow, & Abrantes (2002)“Urban disaster environments and an approach to search and rescue techniques”
THANK U
ALL …..!!!
top related