Transcript
209209
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
The tool for highly
cost-effective universal
machiningFor highly cost-effective universal machining,
MAPAL relies on innovative HPC geometries
especially for applications involving the milling
of structural steel, case hardened steel, tool steel,
cast steel and cast iron as well as non-ferrous
metals.
The tools were designed with unequal lead and
unequal tooth spacing and are characterised
by very smooth running, large cutting volumes,
process reliability and low machine load even with
extreme cutting data.
OptiMill®-HPC milling cutters
� OptiMill®-Uni-HPC 210
� OptiMill®-Uni-HPC-CR 212
� OptiMill®-Uni-HPC-Finish 213
� OptiMill®-Steel-HPC 214
� OptiMill®-Alu-HPC 215
OptiMill®-HPC milling cutters
Opti
Mill®
-
HPC
milling c
utt
ers
210
K1 K2P N
3,00 6 50 6 4 0,06 SCM380-0300Z04R-F0006HB-HP214 30393510 �
4,00 6 54 8 4 0,08 SCM380-0400Z04R-F0008HB-HP214 30393511 �
5,00 6 54 9 4 0,10 SCM380-0500Z04R-F0010HB-HP214 30393512 �
6,00 6 54 10 4 0,12 SCM380-0600Z04R-F0012HB-HP214 30393513 �
8,00 8 58 12 4 0,16 SCM380-0800Z04R-F0016HB-HP214 30393514 �
10,00 10 66 14 4 0,20 SCM380-1000Z04R-F0020HB-HP214 30393515 �
12,00 12 73 16 4 0,24 SCM380-1200Z04R-F0024HB-HP214 30393516 �
14,00 14 73 16 4 0,28 SCM380-1400Z04R-F0028HB-HP214 30393517 �
16,00 16 82 22 4 0,32 SCM380-1600Z04R-F0032HB-HP214 30393518 �
18,00 18 82 22 4 0,36 SCM380-1800Z04R-F0036HB-HP214 30393519 �
20,00 20 92 26 4 0,40 SCM380-2000Z04R-F0040HB-HP214 30393520 �
d 2 h
6
d 1 f
8
l2l1
M
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 3.00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 36° / 38°
Dimensions: Similar to DIN 6527 - short
Special features: Unequal pitch
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron, as well as
chromium and nickel materials
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
Dimensions in mm.
OptiMill®-Uni-HPCSolid carbide HPC end milling cutter, short
SCM38
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 z C Specification Order No.
211
3,00 6 57 8 4 0,06 SCM240-0300Z04R-F0006HB-HP213 30393530 �
4,00 6 57 11 4 0,08 SCM240-0400Z04R-F0008HB-HP213 30393531 �
5,00 6 57 13 4 0,10 SCM240-0500Z04R-F0010HB-HP213 30393532 �
6,00 6 57 13 20 4 0,12 SCM240-0600Z04R-F0012HB-HP213 30393533 �
8,00 8 63 21 25 4 0,16 SCM240-0800Z04R-F0016HB-HP213 30393534 �
10,00 10 72 22 30 4 0,20 SCM240-1000Z04R-F0020HB-HP213 30393535 �
12,00 12 83 26 36 4 0,24 SCM240-1200Z04R-F0024HB-HP213 30393536 �
14,00 14 83 26 36 4 0,28 SCM240-1400Z04R-F0028HB-HP213 30393537 �
16,00 16 92 36 42 4 0,32 SCM240-1600Z04R-F0032HB-HP213 30393538 �
18,00 18 92 36 47 4 0,36 SCM240-1800Z04R-F0036HB-HP213 30393539 �
20,00 20 104 41 55 4 0,40 SCM240-2000Z04R-F0040HB-HP213 30393540 �
25,00 25 136 68 80 4 0,50 SCM240-2500Z04R-F0050HB-HP213 30456672 �
d 2 h
6
d 1 f
8
l2
l3
l1
K1 K2P NM
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 3.00 - 25,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 36° / 38°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch, various ø with neck
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron.
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
Dimensions in mm.
OptiMill®-Uni-HPCSolid carbide HPC end milling cutter, long
SCM24
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
Opti
Mill®
-
HPC
milling c
utt
ers
Opti
Mill®
-
HPC
milling c
utt
ers
212
3,00 6 50 5 – 4 0,3 SCM360-0300Z04R-R0030HA-HP213 30393521 �
4,00 6 50 6 – 4 0,3 SCM360-0400Z04R-R0030HA-HP213 30393522 �
5,00 6 57 8 – 4 0,3 SCM360-0500Z04R-R0030HA-HP213 30393523 �
6,00 6 57 9 20 4 0,3 SCM360-0600Z04R-R0030HA-HP213 30393524 �
8,00 8 63 12 26 4 0,5 SCM360-0800Z04R-R0050HA-HP213 30393525 �
10,00 10 72 15 32 4 0,5 SCM360-1000Z04R-R0050HA-HP213 30393526 �
12,00 12 83 18 38 4 0,5 SCM360-1200Z04R-R0050HA-HP213 30393527 �
16,00 16 98 24 50 4 1,0 SCM360-1600Z04R-R0100HA-HP213 30393528 �
20,00 20 112 30 62 4 1,0 SCM360-2000Z04R-R0100HA-HP213 30393529 �
d 2 h
6
d 1 h
10
l2
l3
l1
R
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
Dimensions in mm.
OptiMill®-Uni-HPC-CRSolid carbide HPC end milling cutter, long
SCM36 Design:Milling cutter diameter: 3.00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 36° / 38°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch,
with neck and corner radius
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron,
as well as chromium and nickel materials and high-
temperature materials.
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 l3 z R Specification Order No.
213
6,00 6 57 15 20 6 SCM370-0600Z06R-S-HA-HP213 30393541 �
8,00 8 63 21 25 6 SCM370-0800Z06R-S-HA-HP213 30393542 �
10,00 10 72 22 30 6 SCM370-1000Z06R-S-HA-HP213 30393543 �
12,00 12 83 26 36 6 SCM370-1200Z06R-S-HA-HP213 30393544 �
16,00 16 92 36 42 6 SCM370-1600Z06R-S-HA-HP213 30393545 �
20,00 20 104 41 55 6 SCM370-2000Z06R-S-HA-HP213 30393546 �
d 2 h
6
d 1 h
10
l2
l3
l1
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
Design:Milling cutter diameter: 6,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 6, 3 blades on centre
Point geometry: Specific lead geometry
Helix angle: 39° / 41°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch, various ø with neck
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron, as well
as chromium and nickel materials and highly heat resisting
materials. For circumferential milling as finishing pass to
produce the highest surface finishes.
Dimensions in mm.
OptiMill®-Uni-HPC-FinishSolid carbide finishing milling cutters, long
SCM37
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 l3 z Specification Order No.
Opti
Mill®
-
HPC
milling c
utt
ers
Opti
Mill®
-
HPC
milling c
utt
ers
P
1,00 6 54 2,5 4 3 – SCM250-0100Z03R-S-HB-HP213 30595972 �
1,50 6 54 4 6 3 – SCM250-0150Z03R-S-HB-HP213 30504879 �
2,00 6 54 5 8 3 – SCM250-0200Z03R-S-HB-HP213 30504885 �
2,50 6 54 6,5 10 3 – SCM250-0250Z03R-S-HB-HP213 30596272 �
3,00 6 57 8 12,5 3 0,06 SCM250-0300Z03R-F0006HB-HP213 30393565 �
4,00 6 57 11 15 3 0,08 SCM250-0400Z03R-F0008HB-HP213 30393566 �
5,00 6 57 13 16 3 0,10 SCM250-0500Z03R-F0010HB-HP213 30393567 �
6,00 6 57 13 20 3 0,12 SCM250-0600Z03R-F0012HB-HP213 30393568 �
8,00 8 63 21 27 3 0,16 SCM250-0800Z03R-F0016HB-HP213 30393569 �
10,00 10 72 22 30 3 0,20 SCM250-1000Z03R-F0020HB-HP213 30393570 �
12,00 12 83 26 36 3 0,24 SCM250-1200Z03R-F0024HB-HP213 30393571 �
14,00 14 83 26 36 3 0,28 SCM250-1400Z03R-F0028HB-HP213 30393572 �
16,00 16 92 36 44 3 0,32 SCM250-1600Z03R-F0032HB-HP213 30393573 �
18,00 18 92 36 44 3 0,36 SCM250-1800Z03R-F0036HB-HP213 30393574 �
20,00 20 104 41 55 3 0,40 SCM250-2000Z03R-F0040HB-HP213 30393575 �
d 2 h
6
d 1 h
10
l1
l2
l3
214
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 1.00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 3, 1 blade on centre
Point geometry: Specific lead geometry
Helix angle: 42° – 43°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch,
various ø with neck
Application: Specially for milling structural steel,
case hardened steel, heat-treated steel and high-
temperature steels.
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
Dimensions in mm.
OptiMill®-Steel-HPCSolid carbide HPC end milling cutter, long
SCM25
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
215
N
3,00 6 57 8 3 0,06 SCM270-0300Z03R-F0006HB-HU210 30393590 �
4,00 6 57 11 3 0,08 SCM270-0400Z03R-F0008HB-HU210 30393591 �
5,00 6 57 13 3 0,10 SCM270-0500Z03R-F0010HB-HU210 30393592 �
6,00 6 57 13 18 3 0,12 SCM270-0600Z03R-F0012HB-HU210 30393593 �
8,00 8 63 21 25 3 0,16 SCM270-0800Z03R-F0016HB-HU210 30393594 �
10,00 10 72 22 30 3 0,20 SCM270-1000Z03R-F0020HB-HU210 30393595 �
12,00 12 83 26 36 3 0,24 SCM270-1200Z03R-F0024HB-HU210 30393596 �
16,00 16 92 36 42 3 0,32 SCM270-1600Z03R-F0032HB-HU210 30393597 �
20,00 20 104 41 52 3 0,40 SCM270-2000Z03R-F0040HB-HU210 30393598 �
d 2 h
6
d 1 h
10
l1
l2
l3
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-HPC milling cutters
Design:Milling cutter diameter: 3.00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 3, right-hand helix
groove, 1 blade above centre
Point geometry: Specific lead geometry
Dimensions: Similar to DIN 6527 – long
Helix angle: 42° - 43°
Special features: Unequal pitch, grooves
polished, design with neck
Application: Specially for milling aluminium alloys,
copper alloys and non-ferrous metals.
Dimensions in mm.
OptiMill®-Alu-HPCSolid carbide HPC aluminium end milling cutter, long
SCM27
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
Opti
Mill®
-
HPC
milling c
utt
ers
Opti
Mill®
-
HPC
milling c
utt
ers
216216
217217
Solid carbide tools | Milling | OptiMill®-Uni
Universal milling cuttersSolid carbide end milling cutters in the OptiMill®-
Uni series are of universal application for milling
grey cast iron, steel, cast steel, chromium and
nickel materials, high-temperature steels, titanium
and titanium alloys, non-ferrous metals, graphite
and plastics.
The universal programme includes roughing,
finishing, roughing-finishing, undersize milling
cutters and radius milling cutters, as well as HPC
milling cutters for highly cost-effective machining.
OptiMill®-Uni
� OptiMill®-Uni 218
� OptiMill®-Uni-Finish 226
� OptiMill®-Uni-Rough 228
� OptiMill®-Uni-Undersize 229
� OptiMill®-Uni-Rough & Finish 230
� OptiMill®-Uni-Radius 231
� OptiMill®-Uni-HPC 232
� OptiMill®-Uni-HPC-CR 234
� OptiMill®-Uni-HPC-Finish 235
� OptiMill®-Uni-HPC-Silent 236
OptiMill®-Uni
Opti
Mill®
–
univ
ers
al applica
tions
218
K1 K2MP N S
1,00 3 50 3 2 – SCM100-0100Z02R-S-HA-HP214 30393252 �
1,50 3 50 4 2 – SCM100-0150Z02R-S-HA-HP214 30393253 �
2,00 3 50 5 2 – SCM100-0200Z02R-S-HA-HP214 30393254 �
2,50 3 50 6 2 – SCM100-0250Z02R-S-HA-HP214 30393255 �
3,00 6 57 8 2 0,03 SCM100-0300Z02R-F0003HB-HP214 30393256 �
4,00 6 57 11 2 0,04 SCM100-0400Z02R-F0004HB-HP214 30393257 �
5,00 6 57 13 2 0,05 SCM100-0500Z02R-F0005HB-HP214 30393258 �
6,00 6 57 13 2 0,06 SCM100-0600Z02R-F0006HB-HP214 30393259 �
8,00 8 63 19 2 0,08 SCM100-0800Z02R-F0008HB-HP214 30393260 �
10,00 10 72 22 2 0,10 SCM100-1000Z02R-F0010HB-HP214 30393261 �
12,00 12 83 26 2 0,12 SCM100-1200Z02R-F0012HB-HP214 30393262 �
16,00 16 92 32 2 0,16 SCM100-1600Z02R-F0016HB-HP214 30393263 �
20,00 20 104 38 2 0,20 SCM100-2000Z02R-F0020HB-HP214 30393264 �
d 2 h
6
d 1 h
10
l1
l2
≤ ø 2.5 mm > ø 2.5 mm
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-UniSolid carbide end milling cutter, long | 30°
SCM10
Dimensions in mm.
Design:Milling cutter diameter: 1,00 - 20,00 mm
Shank form: Shank ø 3 mm: HA (DIN 6535);
from shank ø 6 mm: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 2, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar DIN 6527 – long
Application: Of universal application, suitable for both high-
strength materials and for aluminium and non-ferrous metals.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA / HB
d1 h10 d2 h6 l1 l2 z C Specification Order No.
219
K1 K2MP N S
4,00 6 57 11 4 – SCM110-0400Z04R-S-HA-HP214 30393295 �
4,50 6 57 11 4 – SCM110-0450Z04R-S-HA-HP214 30393296 �
5,00 6 57 13 4 – SCM110-0500Z04R-S-HA-HP214 30393297 �
5,50 6 57 13 4 – SCM110-0550Z04R-S-HA-HP214 30393298 �
6,00 6 57 13 4 – SCM110-0600Z04R-S-HA-HP214 30393299 �
6,50 8 63 16 4 – SCM110-0650Z04R-S-HA-HP214 30393300 �
7,00 8 63 16 4 – SCM110-0700Z04R-S-HA-HP214 30393301 �
7,50 8 63 19 4 – SCM110-0750Z04R-S-HA-HP214 30393302 �
8,00 8 63 19 4 0,08 SCM110-0800Z04R-F0008HA-HP214 30393303 �
8,50 10 72 19 4 0,09 SCM110-0850Z04R-F0009HA-HP214 30393304 �
9,00 10 72 19 4 0,09 SCM110-0900Z04R-F0009HA-HP214 30393305 �
9,50 10 72 22 4 0,10 SCM110-0950Z04R-F0010HA-HP214 30393306 �
10,00 10 72 22 4 0,10 SCM110-1000Z04R-F0010HA-HP214 30393307 �
11,00 12 83 26 4 0,11 SCM110-1100Z04R-F0011HA-HP214 30393308 �
12,00 12 83 26 4 0,12 SCM110-1200Z04R-F0012HA-HP214 30393309 �
13,00 14 83 26 4 0,13 SCM110-1300Z04R-F0013HA-HP214 30393310 �
14,00 14 83 26 4 0,14 SCM110-1400Z04R-F0014HA-HP214 30393311 �
15,00 16 92 32 4 0,15 SCM110-1500Z04R-F0015HA-HP214 30393312 �
16,00 16 92 32 4 0,16 SCM110-1600Z04R-F0016HA-HP214 30393313 �
17,00 18 92 32 4 0,17 SCM110-1700Z04R-F0017HA-HP214 30393314 �
18,00 18 92 32 4 0,18 SCM110-1800Z04R-F0018HA-HP214 30393315 �
19,00 20 104 38 4 0,19 SCM110-1900Z04R-F0019HA-HP214 30393316 �
20,00 20 104 38 4 0,20 SCM110-2000Z04R-F0020HA-HP214 30393317 �
d 2 h
6
d 1 h
10
l1
l2
< ø 8.00 mm ≥ ø 8.00 mm
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-UniSolid carbide end milling cutter, long | 30°
SCM11
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar to DIN 6527 – long
Application: Of universal application, suitable for both
high-strength materials and for aluminium and non-
ferrous metals – very high machining performance.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z C Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
220
2,00 6 40 4 3 SCM120-0200Z03R-S-HA-HP214 30393176 �
2,50 6 40 4 3 SCM120-0250Z03R-S-HA-HP214 30393234 �
3,00 6 40 5 3 SCM120-0300Z03R-S-HA-HP214 30393235 �
3,50 6 40 5 3 SCM120-0350Z03R-S-HA-HP214 30393236 �
4,00 6 40 7 3 SCM120-0400Z03R-S-HA-HP214 30393237 �
4,50 6 40 7 3 SCM120-0450Z03R-S-HA-HP214 30393181 �
5,00 6 40 8 3 SCM120-0500Z03R-S-HA-HP214 30393238 �
5,50 6 40 8 3 SCM120-0550Z03R-S-HA-HP214 30393239 �
* 5,75 6 40 8 3 SCM120-0575Z03R-S-HA-HP214 30393240 �
6,00 6 40 8 3 SCM120-0600Z03R-S-HA-HP214 30393241 �
* 6,75 8 43 11 3 SCM120-0675Z03R-S-HA-HP214 30393186 �
7,00 8 43 11 3 SCM120-0700Z03R-S-HA-HP214 30393242 �
* 7,75 8 43 11 3 SCM120-0775Z03R-S-HA-HP214 30393243 �
8,00 8 43 11 3 SCM120-0800Z03R-S-HA-HP214 30393244 �
* 8,70 10 50 13 3 SCM120-0870Z03R-S-HA-HP214 30393245 �
9,00 10 50 13 3 SCM120-0900Z03R-S-HA-HP214 30393191 �
* 9,70 10 50 13 3 SCM120-0970Z03R-S-HA-HP214 30393246 �
10,00 10 50 13 3 SCM120-1000Z03R-S-HA-HP214 30393247 �
12,00 12 55 15 3 SCM120-1200Z03R-S-HA-HP214 30393248 �
14,00 14 58 15 3 SCM120-1400Z03R-S-HA-HP214 30393249 �
16,00 16 62 18 3 SCM120-1600Z03R-S-HA-HP214 30393196 �
18,00 18 70 20 3 SCM120-1800Z03R-S-HA-HP214 30393250 �
20,00 20 75 22 3 SCM120-2000Z03R-S-HA-HP214 30393251 �
d 2 h
6
d 1 h
10
l1
l2
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
The milling cutters marked with * have undersize and can be used specially for keyway milling.
Dimensions in mm.
Design:Milling cutter diameter: 2,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: To works’ standard – short
Application: Of universal application, suitable for both
high-strength materials and for aluminium and non-
ferrous metals – very high machining performance.
OptiMill®-UniSolid carbide end milling cutter, short | 30°
SCM12
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z Specification Order No.
221
* 2,80 6 57 8 3 SCM130-0280Z03R-S-HA-HP214 30393265 �
3,00 6 57 8 3 SCM130-0300Z03R-S-HA-HP214 30393266 �
* 3,80 6 57 11 3 SCM130-0380Z03R-S-HA-HP214 30393267 �
4,00 6 57 11 3 SCM130-0400Z03R-S-HA-HP214 30393268 �
* 4,80 6 57 13 3 SCM130-0480Z03R-S-HA-HP214 30393269 �
5,00 6 57 13 3 SCM130-0500Z03R-S-HA-HP214 30393270 �
* 5,80 6 57 13 3 SCM130-0580Z03R-S-HA-HP214 30393271 �
6,00 6 57 13 3 SCM130-0600Z03R-S-HA-HP214 30393272 �
* 6,80 8 63 16 3 SCM130-0680Z03R-S-HA-HP214 30393273 �
7,00 8 63 16 3 SCM130-0700Z03R-S-HA-HP214 30393274 �
* 7,80 8 63 19 3 SCM130-0780Z03R-S-HA-HP214 30393275 �
8,00 8 63 19 3 SCM130-0800Z03R-S-HA-HP214 30393276 �
* 8,70 10 72 19 3 SCM130-0870Z03R-S-HA-HP214 30393277 �
9,00 10 72 19 3 SCM130-0900Z03R-S-HA-HP214 30393278 �
* 9,70 10 72 22 3 SCM130-0970Z03R-S-HA-HP214 30393279 �
10,00 10 72 22 3 SCM130-1000Z03R-S-HA-HP214 30393280 �
* 10,70 12 83 26 3 SCM130-1070Z03R-S-HA-HP214 30393281 �
11,00 12 83 26 3 SCM130-1100Z03R-S-HA-HP214 30393282 �
* 11,70 12 83 26 3 SCM130-1170Z03R-S-HA-HP214 30393283 �
12,00 12 83 26 3 SCM130-1200Z03R-S-HA-HP214 30393284 �
* 13,70 14 83 26 3 SCM130-1370Z03R-S-HA-HP214 30393285 �
14,00 14 83 26 3 SCM130-1400Z03R-S-HA-HP214 30393286 �
* 15,70 16 92 32 3 SCM130-1570Z03R-S-HA-HP214 30393287 �
16,00 16 92 32 3 SCM130-1600Z03R-S-HA-HP214 30393288 �
* 17,70 18 92 32 3 SCM130-1770Z03R-S-HA-HP214 30393289 �
18,00 18 92 32 3 SCM130-1800Z03R-S-HA-HP214 30393290 �
* 19,70 20 104 38 3 SCM130-1970Z03R-S-HA-HP214 30393291 �
20,00 20 104 38 3 SCM130-2000Z03R-S-HA-HP214 30393292 �
d 2 h
6
d 1 h
10
l1
l2
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
The undersizes marked with * can be used specially for keyway milling.
Dimensions in mm.
Design:Milling cutter diameter: 2,80 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar DIN 6527 – long
Application: Of universal application, suitable for both
high-strength materials and for aluminium and non-
ferrous metals – very high machining performance.
OptiMill®-UniSolid carbide end milling cutter, long | 30°
SCM13
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
222
4,00 6 57 8 3 SCM141-0400Z03R-S-HB-HP214 30393548 �
6,00 6 57 10 3 SCM141-0600Z03R-S-HB-HP214 30393549 �
6,50 8 63 13 3 SCM141-0650Z03R-S-HB-HP214 30393550 �
7,00 8 63 13 3 SCM141-0700Z03R-S-HB-HP214 30393551 �
7,50 8 63 16 3 SCM141-0750Z03R-S-HB-HP214 30393552 �
8,00 8 63 16 3 SCM141-0800Z03R-S-HB-HP214 30393553 �
8,50 10 72 16 3 SCM141-0850Z03R-S-HB-HP214 30393554 �
9,00 10 72 16 3 SCM141-0900Z03R-S-HB-HP214 30393555 �
9,50 10 72 19 3 SCM141-0950Z03R-S-HB-HP214 30393556 �
10,00 10 72 19 3 SCM141-1000Z03R-S-HB-HP214 30393557 �
12,00 12 83 22 3 SCM141-1200Z03R-S-HB-HP214 30393558 �
14,00 14 83 22 3 SCM141-1400Z03R-S-HB-HP214 30393559 �
16,00 16 92 26 3 SCM141-1600Z03R-S-HB-HP214 30393560 �
18,00 18 92 26 3 SCM141-1800Z03R-S-HB-HP214 30393561 �
19,00 20 104 32 3 SCM141-1900Z03R-S-HB-HP214 30393562 �
20,00 20 104 32 3 SCM141-2000Z03R-S-HB-HP214 30393563 �
d 2 h
6
d 1 h
10
l1
l2
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar DIN 6527 – long
Application: Milling of grey cast iron, malleable cast
iron, steel, cast steel, chromium and nickel materials,
high-temperature steels, titanium and titanium alloys,
non-ferrous metals, graphite and plastics.
OptiMill®-UniSolid carbide end milling cutter, long | 30°
internal coolant supply
SCM14
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 z Specification Order No.
223
4,00 6 63 19 3 0,06 SCM150-0400Z03R-F0006HB-HP214 30393375 �
5,00 6 68 24 3 0,08 SCM150-0500Z03R-F0008HB-HP214 30393376 �
6,00 6 68 24 3 0,09 SCM150-0600Z03R-F0009HB-HP214 30393377 �
8,00 8 88 38 3 0,12 SCM150-0800Z03R-F0012HB-HP214 30393378 �
10,00 10 95 45 3 0,15 SCM150-1000Z03R-F0015HB-HP214 30393379 �
12,00 12 110 53 3 0,18 SCM150-1200Z03R-F0018HB-HP214 30393380 �
16,00 16 123 63 3 0,24 SCM150-1600Z03R-F0024HB-HP214 30393381 �
20,00 20 141 75 3 0,30 SCM150-2000Z03R-F0030HB-HP214 30393382 �
d 2 h
6
d 1 h
10
l2
l1
K1 K2MP S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: To works’ standard – overlong
Application: Milling of cast iron, chilled cast iron,
malleable cast iron, cast steel, steel, nickel materials,
high-temperature materials (CrNi and CrNiCo steels).
OptiMill®-Uni, longSolid carbide end milling cutter, overlong | 45°
SCM15, long
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 z C Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
224
1,00 3 38 2 3 SCM160-0100Z03R-S-HA-HP214 30393389 �
1,50 3 38 3 3 SCM160-0150Z03R-S-HA-HP214 30393390 �
2,00 3 54 4 3 SCM160-0200Z03R-S-HA-HP214 30393391 �
2,50 6 54 6 3 SCM160-0250Z03R-S-HB-HP214 30393392 �
d 2 h
6
d 1 h
10
l1
l2
K1 K2MP S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-Uni, smallSolid carbide end milling cutter | 45°
SCM16, small design
Dimensions in mm.
Design:Milling cutter diameter: 1,00 - 2,50 mm
Shank form: Shank ø 3 mm: HA (DIN 6535);
Shank ø 6 mm: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: To works' standard
Application: Milling of cast iron, chilled cast iron,
malleable cast iron, cast steel, steel, nickel materials,
high-temperature materials (CrNi and CrNiCo steels).
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA / HB
d1 h10 d2 h6 l1 l2 z Specification Order No.
225
3,00 6 57 8 – 3 0,05 SCM170-0300Z03R-F0005HB-HP214 30393402 �
3,50 6 57 11 – 3 0,05 SCM170-0350Z03R-F0005HB-HP214 30393403 �
4,00 6 57 11 – 3 0,06 SCM170-0400Z03R-F0006HB-HP214 30393404 �
4,50 6 57 13 – 3 0,07 SCM170-0450Z03R-F0007HB-HP214 30393405 �
5,00 6 57 13 – 3 0,08 SCM170-0500Z03R-F0008HB-HP214 30393406 �
5,50 6 57 13 – 3 0,08 SCM170-0550Z03R-F0008HB-HP214 30393407 �
6,00 6 57 13 20 3 0,09 SCM170-0600Z03R-F0009HB-HP214 30393408 �
7,00 8 63 16 – 3 0,11 SCM170-0700Z03R-F0011HB-HP214 30393409 �
8,00 8 63 19 25 3 0,12 SCM170-0800Z03R-F0012HB-HP214 30393410 �
9,50 10 72 22 – 3 0,14 SCM170-0950Z03R-F0014HB-HP214 30393411 �
10,00 10 72 22 30 3 0,15 SCM170-1000Z03R-F0015HB-HP214 30393412 �
11,00 12 83 26 – 3 0,17 SCM170-1100Z03R-F0017HB-HP214 30393413 �
12,00 12 83 26 36 3 0,18 SCM170-1200Z03R-F0018HB-HP214 30393414 �
14,00 14 83 26 36 3 0,21 SCM170-1400Z03R-F0021HB-HP214 30393415 �
16,00 16 92 32 42 3 0,24 SCM170-1600Z03R-F0024HB-HP214 30393416 �
18,00 18 92 32 42 3 0,27 SCM170-1800Z03R-F0027HB-HP214 30393417 �
20,00 20 104 38 55 3 0,30 SCM170-2000Z03R-F0030HB-HP214 30393418 �
d 2 h
6
d 1 h
10
l1
l2
l3
K1 K2MP S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Dimensions in mm.
Design:Milling cutter diameter: 3,00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: Similar DIN 6527 – long
Special features: Various ø with neck
Application: Milling of cast iron, chilled cast iron, mal-
leable cast iron, cast steel, steel, nickel materials, high-
temperature materials (CrNi and CrNiCo steels).
OptiMill®-Uni, largeSolid carbide end milling cutter, long | 45°
SCM17, large design
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
226
d 2 h
6
d 1 h
10
l1
l2z = 6 z = 8
4,00 6 57 11 6 0,04 SCM180-0400Z06R-F0004HA-HP214 30393423 � SCM180-0400Z06R-F0004HB-HP214 30393430 �
5,00 6 57 13 6 0,05 SCM180-0500Z06R-F0005HA-HP214 30393424 � SCM180-0500Z06R-F0005HB-HP214 30393431 �
6,00 6 57 13 6 0,06 SCM180-0600Z06R-F0006HA-HP214 30393425 � SCM180-0600Z06R-F0006HB-HP214 30393432 �
8,00 8 63 19 6 0,08 SCM180-0800Z06R-F0008HA-HP214 30393426 � SCM180-0800Z06R-F0008HB-HP214 30393433 �
10,00 10 72 22 6 0,10 SCM180-1000Z06R-F0010HA-HP214 30393427 � SCM180-1000Z06R-F0010HB-HP214 30393434 �
12,00 12 83 26 6 0,12 SCM180-1200Z06R-F0012HA-HP214 30393428 � SCM180-1200Z06R-F0012HB-HP214 30393435 �
16 ,00 16 92 32 6 0,16 SCM180-1600Z06R-F0016HA-HP214 30393429 � SCM180-1600Z06R-F0016HB-HP214 30393436 �
20,00 20 104 38 8 0,20 SCM180-2000Z08R-F0020HA-HP214 30393440 � SCM180-2000Z08R-F0020HB-HP214 30393443 �
25,00 25 150 75 8 0,25 SCM180-2500Z08R-F0025HA-HP214 30393441 � SCM180-2500Z08R-F0025HB-HP214 30393444 �
32,00 32 150 75 8 0,32 SCM180-3200Z08R-F0032HA-HP214 30393442 � SCM180-3200Z08R-F0032HB-HP214 30393445 �
K1 K2MP N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-Uni-FinishSolid carbide finishing end milling cutter, long | 45°
SCM18
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 32,00 mm
Shank form: HA, HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 6 to ø 16 mm , z = 8 from
ø 20 mm, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: Similar to DIN 6527 – long
Application:Of universal application, suitable for both high-strength
materials and for aluminium and non-ferrous metals.
For circumferential milling as finishing pass to produce
the highest surface finishes.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA Shank form HB
d1 h10 d2 h6 l1 l2 z C Specification Order No. Specification Order No.
227
4,00 6 62 16 6 0,04 SCM190-0400Z06R-F0004HA-HP214 30393446 � SCM190-0400Z06R-F0004HB-HP214 30393458 �
5,00 6 62 18 6 0,05 SCM190-0500Z06R-F0005HA-HP214 30393447 � SCM190-0500Z06R-F0005HB-HP21 4 30393459 �
6,00 6 62 18 6 0,06 SCM190-0600Z06R-F0006HA-HP214 30393448 � SCM190-0600Z06R-F0006HB-HP214 30393460 �
8,00 8 68 24 6 0,08 SCM190-0800Z06R-F0008HA-HP214 30393449 � SCM190-0800Z06R-F0008HB-HP214 30393461 �
10,00 10 80 30 6 0,10 SCM190-1000Z06R-F0010HA-HP214 30393450 � SCM190-1000Z06R-F0010HB-HP214 30393462 �
12,00 12 93 36 6 0,12 SCM190-1200Z06R-F0012HA-HP214 30393451 � SCM190-1200Z06R-F0012HB-HP214 30393463 �
16,00 16 108 48 6 0,16 SCM190-1600Z06R-F0016HA-HP214 30393452 � SCM190-1600Z06R-F0016HB-HP214 30393464 �
20,00 20 126 60 8 0,20 SCM190-2000Z08R-F0020HA-HP214 30393453 � SCM190-2000Z08R-F0020HB-HP214 30393465 �
20,00 20 135 75 8 0,20 SCM190-2000Z08R-F0020HA-HP214 30393454 � SCM190-2000Z08R-F0020HB-HP214 30393466 �
20,00 20 150 95 8 0,20 SCM190-2000Z08R-F0020HA-HP214 30393455 � SCM190-2000Z08R-F0020HB-HP214 30393467 �
25,00 25 160 95 8 0,25 SCM190-2500Z08R-F0025HA-HP214 30393456 � SCM190-2500Z08R-F0025HB-HP214 30393468 �
32,00 32 160 95 8 0,32 SCM190-3200Z08R-F0032HA-HP214 30393457 � SCM190-3200Z08R-F0032HB-HP214 30393469 �
d 2 h
6
d 1 h
10
l1
l2z = 6 z = 8
K1 K2MP N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-Uni-FinishSolid carbide finishing end milling cutter, overlong | 45°
SCM19, long design
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 32,00 mm
Shank form: HA, HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 6 to ø 16 mm , z = 8 from
ø 20 mm, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: Similar DIN 6527 – overlong
Application:Of universal application, suitable for both high-strength
materials and for aluminium and non-ferrous metals.
For circumferential milling as finishing pass to produce
the highest surface finishes.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA Shank form HB
d1 h10 d2 h6 l1 l2 z C Specification Order No. Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
228
6,00 6 57 13 20 4 0,24 SCM200-0600Z04R-F0024HB-HP214 30393500 �
8,00 8 63 19 25 4 0,32 SCM200-0800Z04R-F0032HB-HP214 30393501 �
10,00 10 72 22 30 4 0,40 SCM200-1000Z04R-F0040HB-HP214 30393502 �
12,00 12 83 26 36 4 0,48 SCM200-1200Z04R-F0048HB-HP214 30393503 �
14,00 14 83 26 36 4 0,56 SCM200-1400Z04R-F0056HB-HP214 30393504 �
16,00 16 92 32 42 5 0,64 SCM200-1600Z05R-F0064HB-HP214 30393505 �
18,00 18 92 32 42 5 0,72 SCM200-1800Z05R-F0072HB-HP214 30393506 �
20,00 20 104 38 55 6 0,80 SCM200-2000Z06R-F0080HB-HP214 30393508 �
25,00 25 121 45 60 6 1,00 SCM200-2500Z06R-F0100HB-HP214 30393509 �
d 2 h
6
d 1 h
10
l1
l2
l3
z = 4 z = 5
z = 6
K1 K2MP N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 6,00 - 25,00 mm
Shank form: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges:
z = 4 to ø 14 mm , 2 blades on centre
z = 5 from ø 16 mm to 18 mm, 1 blade above centre
z = 6 from ø 20 mm , 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: Similar to DIN 6527 – long
Special features: Profile undercut roughing teeth,
right-hand helix groove.
Application: Specially for roughing of steel, cast iron,
non-ferrous metals, rustproof and acid-resistant steels.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions in mm.
OptiMill®-Uni-RoughSolid carbide roughing milling cutter, long | 45°
SCM20
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
229
2,80 6 50 5 3 0,04 SCM210-0280Z03R-F0004HA-HP214 30393353 �
3,80 6 54 6 3 0,06 SCM210-0380Z03R-F0006HA-HP214 30393354 �
4,80 6 54 7 3 0,07 SCM210-0480Z03R-F0007HA-HP214 30393355 �
5,75 6 54 8 3 0,09 SCM210-0575Z03R-F0009HA-HP214 30393357 �
6,75 8 58 9 3 0,10 SCM210-0675Z03R-F0010HA-HP214 30393358 �
7,75 8 58 10 3 0,12 SCM210-0775Z03R-F0012HA-HP214 30393359 �
8,70 10 66 11 3 0,13 SCM210-0870Z03R-F0013HA-HP214 30393360 �
9,70 10 66 12 3 0,15 SCM210-0970Z03R-F0015HA-HP214 30393361 �
11,70 12 73 12 3 0,18 SCM210-1170Z03R-F0018HA-HP214 30393362 �
13,70 14 75 14 3 0,21 SCM210-1370Z03R-F0021HA-HP214 30393363 �
15,70 16 82 16 3 0,24 SCM210-1570Z03R-F0024HA-HP214 30393364 �
17,70 18 84 18 3 0,27 SCM210-1770Z03R-F0027HA-HP214 30393365 �
19,70 20 92 20 3 0,30 SCM210-1970Z03R-F0030HA-HP214 30393366 �
d 2 h
6
d 1 h
10
l1
l2
K1 K2MP S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-Uni-UndersizeSolid carbide undersize end milling cutter, short | 45°
SCM21
Dimensions in mm.
Design:Milling cutter diameter 2,80 - 19,70 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 3, 1 blade above centre;
back taper on the peripheral
cutting edge towards face
cutting edge.
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: Similar to DIN 6527 – short
Application: Keyway milling in cast steel, structural
steel, tool steel, nickel materials, highly heat resisting
materials.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z C Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
230
6,00 6 57 13 3 – SCM220-0600Z03R-S-HB-HP219 30393471 �
8,00 8 63 19 3 0,08 SCM220-0800Z03R-F0008HB-HP219 30393472 �
10,00 10 72 22 4 0,10 SCM220-1000Z04R-F0010HB-HP219 30393473 �
12,00 12 83 26 4 0,12 SCM220-1200Z04R-F0012HB-HP219 30393474 �
14,00 14 83 26 4 0,14 SCM220-1400Z04R-F0014HB-HP219 30393475 �
16,00 16 92 32 4 0,16 SCM220-1600Z04R-F0016HB-HP219 30393476 �
18,00 18 92 32 4 0,18 SCM220-1800Z04R-F0018HB-HP219 30393477 �
20,00 20 104 38 4 0,20 SCM220-2000Z04R-F0020HB-HP219 30393478 �
d 2 h
6
d 1 h
10
l1
l2z = 3 z = 4
< ø 8,00 mm ≥ ø 8,00 mm
K1 K2MP N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Uni
Design:Milling cutter diameter: 6,00 – 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlTiN coating
Number of cutting edges: z = 3 to ø 8 mm, 1 blade above centre
z = 4 from ø 10 mm,
2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar to DIN 6527 – long
Application: Of universal application, suitable for both high-
strength materials and for aluminium and non-ferrous metals.
Roughing-finishing in one machining step, optimum feed rates,
optimum surface finish, long tool life.
Dimensions in mm.
OptiMill®-Uni-Rough & FinishSolid carbide roughing-finishing milling cutter,
long | 30°
SCM22
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 z C Specification Order No.
231
2,00 6 54 5 2 1,0 SCM230-0200Z02R-R0100HB-HP214 30393611 �
3,00 6 54 5 2 1,5 SCM230-0300Z02R-R0150HB-HP214 30393612 �
4,00 6 54 8 2 2,0 SCM230-0400Z02R-R0200HB-HP214 30393613 �
5,00 6 54 9 2 2,5 SCM230-0500Z02R-R0250HB-HP214 30393614 �
6,00 6 54 10 2 3,0 SCM230-0600Z02R-R0300HB-HP214 30393615 �
8,00 8 58 12 2 4,0 SCM230-0800Z02R-R0400HB-HP214 30393616 �
10,00 10 66 14 2 5,0 SCM230-1000Z02R-R0500HB-HP214 30393617 �
12,00 12 73 16 2 6,0 SCM230-1200Z02R-R0600HB-HP214 30393618 �
16,00 16 82 22 2 8,0 SCM230-1600Z02R-R0800HB-HP214 30393619 �
20,00 20 92 26 2 10,0 SCM230-2000Z02R-R1000HB-HP214 30393620 �
d 2 h
6
d 1 h
10
l1
l2
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 2,00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 2, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar to DIN 6527 – short
Application: Of universal application, suitable for both
high-strength materials and for aluminium and non-
ferrous metals.
Solid carbide tools | Milling | OptiMill®-Uni
OptiMill®-Uni-RadiusSolid carbide radius milling cutter, short | 30°
SCM23
Dimensions in mm.
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 z R Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
232
3,00 6 50 6 4 0,06 SCM380-0300Z04R-F0006HB-HP213 30393510 �
4,00 6 54 8 4 0,08 SCM380-0400Z04R-F0008HB-HP213 30393511 �
5,00 6 54 9 4 0,10 SCM380-0500Z04R-F0010HB-HP213 30393512 �
6,00 6 54 10 4 0,12 SCM380-0600Z04R-F0012HB-HP213 30393513 �
8,00 8 58 12 4 0,16 SCM380-0800Z04R-F0016HB-HP213 30393514 �
10,00 10 66 14 4 0,20 SCM380-1000Z04R-F0020HB-HP213 30393515 �
12,00 12 73 16 4 0,24 SCM380-1200Z04R-F0024HB-HP213 30393516 �
14,00 14 73 16 4 0,28 SCM380-1400Z04R-F0028HB-HP213 30393517 �
16,00 16 82 22 4 0,32 SCM380-1600Z04R-F0032HB-HP213 30393518 �
18,00 18 82 22 4 0,36 SCM380-1800Z04R-F0036HB-HP213 30393519 �
20,00 20 92 26 4 0,40 SCM380-2000Z04R-F0040HB-HP213 30393520 �
d 2 h
6
d 1 f
8
l2l1
K1 K2MP N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 3,00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 36° / 38°
Dimensions: Similar to DIN 6527 - short
Special features: Unequal pitch,
various ø with neck
Application: Specially for milling structural steel,
case hardened steel, tool steel, cast steel and cast iron.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions in mm.
OptiMill®-Uni-HPCSolid carbide HPC end milling cutter, short
SCM38
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 z C Specification Order No.
233
3,00 6 57 8 – 4 0,06 SCM240-0300Z04R-F0006HB-HP213 30393530 �
4,00 6 57 11 – 4 0,08 SCM240-0400Z04R-F0008HB-HP213 30393531 �
5,00 6 57 13 – 4 0,10 SCM240-0500Z04R-F0010HB-HP213 30393532 �
6,00 6 57 13 20 4 0,12 SCM240-0600Z04R-F0012HB-HP213 30393533 �
8,00 8 63 21 25 4 0,16 SCM240-0800Z04R-F0016HB-HP213 30393534 �
10,00 10 72 22 30 4 0,20 SCM240-1000Z04R-F0020HB-HP213 30393535 �
12,00 12 83 26 36 4 0,24 SCM240-1200Z04R-F0024HB-HP213 30393536 �
14,00 14 83 26 36 4 0,28 SCM240-1400Z04R-F0028HB-HP213 30393537 �
16,00 16 92 36 42 4 0,32 SCM240-1600Z04R-F0032HB-HP213 30393538 �
18,00 18 92 36 47 4 0,36 SCM240-1800Z04R-F0036HB-HP213 30393539 �
20,00 20 104 41 55 4 0,40 SCM240-2000Z04R-F0040HB-HP213 30393540 �
25,00 25 136 68 80 4 0,50 SCM240-2500Z04R-F0040HB-HP213 30456672 �
d 2 h
6
d 1 f
8
l2
l3
l1
K1 K2MP N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 3,00 - 25,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 36° / 38°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch,
various ø with neck
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions in mm.
OptiMill®-Uni-HPCSolid carbide HPC end milling cutter, long
SCM24
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
234
3,00 6 50 5 – 4 0,3 SCM360-0300Z04R-R0030HA-HP213 30393521 �
4,00 6 50 6 – 4 0,3 SCM360-0400Z04R-R0030HA-HP213 30393522 �
5,00 6 57 8 – 4 0,3 SCM360-0500Z04R-R0030HA-HP213 30393523 �
6,00 6 57 9 20 4 0,3 SCM360-0600Z04R-R0030HA-HP213 30393524 �
8,00 8 63 12 26 4 0,5 SCM360-0800Z04R-R0050HA-HP213 30393525 �
10,00 10 72 15 32 4 0,5 SCM360-1000Z04R-R0050HA-HP213 30393526 �
12,00 12 83 18 38 4 0,5 SCM360-1200Z04R-R0050HA-HP213 30393527 �
16,00 16 98 24 50 4 1,0 SCM360-1600Z04R-R0100HA-HP213 30393528 �
20,00 20 112 30 62 4 1,0 SCM360-2000Z04R-R0100HA-HP213 30393529 �
d 2 h
6
d 1 h
10
l2
l3
l1
R
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Uni
Dimensions in mm.
OptiMill®-Uni-HPC-CRSolid carbide HPC end milling cutter, long
SCM36 Design:Milling cutter diameter: 3,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 36° / 38°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch,
with neck and corner radius
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron,
as well as chromium and nickel materials and high-
temperature materials.
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 l3 z R Specification Order No.
235
6,00 6 57 15 20 6 SCM370-0600Z06R-S-HA-HP213 30393541 �
8,00 8 63 21 25 6 SCM370-0800Z06R-S-HA-HP213 30393542 �
10,00 10 72 22 30 6 SCM370-1000Z06R-S-HA-HP213 30393543 �
12,00 12 83 26 36 6 SCM370-1200Z06R-S-HA-HP213 30393544 �
16,00 16 92 36 42 6 SCM370-1600Z06R-S-HA-HP213 30393545 �
20,00 20 104 41 55 6 SCM370-2000Z06R-S-HA-HP213 30393546 �
d 2 h
6
d 1 h
10
l2
l3
l1
K1 K2MP N S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Uni
Design:Milling cutter diameter: 6,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 6, 3 blades on centre
Point geometry: Specific lead geometry
Helix angle: 39° / 41°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch
Application: Specially for milling structural steel, case
hardened steel, tool steel, cast steel and cast iron, as well
as chromium and nickel materials and highly heat resisting
materials. For circumferential milling as finishing pass to
produce the highest surface finishes.
Dimensions in mm.
OptiMill®-Uni-HPC-FinishSolid carbide finishing milling cutters, long
SCM37
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 l3 z Specification Order No.
Opti
Mill®
–
univ
ers
al applica
tions
236
6,00 6 57 13 20 5 0,09 SCM570-0600Z05R-HB-HP723 30510329 �
8,00 8 63 21 25 5 0,12 SCM570-0800Z05R-HB-HP723 30510343 �
10,00 10 72 22 30 5 0,15 SCM570-1000Z05R-HB-HP723 30510345 �
12,00 12 83 26 36 5 0,18 SCM570-1200Z05R-HB-HP723 30510347 �
16,00 16 92 36 42 5 0,24 SCM570-1600Z05R-HB-HP723 30510348 �
20,00 20 104 41 55 5 0,30 SCM570-2000Z05R-HB-HP723 30510349 �
25,00 25 125 50 65 5 0,38 SCM570-2500Z05R-HB-HP723 30510350 �
K1 K2MP N S
d2 h
6
l2
d1 h
10
l1
l3
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Uni
OptiMill®-Uni-HPC-SilentSolid carbide HPC end milling cutter, long
SCM57 Design:Milling cutter diameter: 6,00 - 25,00 mm
Shank form: HA (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 5, 1 blades on centre
Point geometry: Specific lead geometry
Helix angle: 41° - 42°
Dimensions: Similar to DIN 6527 - long
Special features: Unequal pitch
Application: Specially designed for roughing and
finishing structural steel, case hardened steel, tool steel,
cast steel and cast iron, as well as chromium and nickel
materials and highly heat resistant materials.
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z R Specification Order No.
Dimensions in mm.
237
Notes
Solid carbide tools
Opti
Mill®
–
univ
ers
al applica
tions
238
239
Solid carbide tools | Milling | OptiMill®-Steel
Solid carbide end milling
cutters for steel machiningThe unequal cutting edge spacing of the
OptiMill®-Steel-HPC ensures absolutely smooth
running during the machining process. Both,
higher cutting speeds and larger feed rates are
easily possible.
Plunging and "ramping processes" are enhanced
by the larger chip space at the leading end of the
grooves.
The HPC milling cutters are characterised by
higher performance and reduced machine load.
OptiMill®-Steel
� OptiMill®-Steel-HPC 240
OptiMill®-Steel
Opti
Mill®
–
steel m
ach
inin
g
240
Pd 2
h6
d 1 h
10
l1
l2
l3
1,00 6 54 2,5 4 3 – SCM250-0100Z03R-S-HB-HP213 30595972 �
1,50 6 54 4 6 3 – SCM250-0150Z03R-S-HB-HP213 30504879 �
2,00 6 54 5 8 3 – SCM250-0200Z03R-S-HB-HP213 30504885 �
2,50 6 54 6,5 10 3 – SCM250-0250Z03R-S-HB-HP213 30596272 �
3,00 6 57 8 12,5 3 0,06 SCM250-0300Z03R-F0006HB-HP213 30393565 �
4,00 6 57 11 15 3 0,08 SCM250-0400Z03R-F0008HB-HP213 30393566 �
5,00 6 57 13 16 3 0,10 SCM250-0500Z03R-F0010HB-HP213 30393567 �
6,00 6 57 13 20 3 0,12 SCM250-0600Z03R-F0012HB-HP213 30393568 �
8,00 8 63 21 27 3 0,16 SCM250-0800Z03R-F0016HB-HP213 30393569 �
10,00 10 72 22 30 3 0,20 SCM250-1000Z03R-F0020HB-HP213 30393570 �
12,00 12 83 26 36 3 0,24 SCM250-1200Z03R-F0024HB-HP213 30393571 �
14,00 14 83 26 36 3 0,28 SCM250-1400Z03R-F0028HB-HP213 30393572 �
16,00 16 92 36 44 3 0,32 SCM250-1600Z03R-F0032HB-HP213 30393573 �
18,00 18 92 36 44 3 0,36 SCM250-1800Z03R-F0036HB-HP213 30393574 �
20,00 20 104 41 55 3 0,40 SCM250-2000Z03R-F0040HB-HP213 30393575 �
Baumaße Schaftform HB
d1 h10 d2 h6 l1 l2 l3 z C Spezifikation Bestell-Nr.
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 1.00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges: z = 3, 1 blade on centre
Point geometry: Specific lead geometry
Helix angle: 42° – 43°
Dimensions: Similar to DIN 6527 – long
Special features: Unequal pitch,
various ø with neck
Application: Specially for milling structural steel,
case hardened steel, heat-treated steel and high-
temperature steels.
Solid carbide tools | Milling | OptiMill®-Steel
Dimensions in mm.
OptiMill®-Steel-HPCSolid carbide HPC end milling cutter, long
SCM25
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
241
Solid carbide tools | Milling | OptiMill®-Steel
Notes
Opti
Mill®
–
steel m
ach
inin
g
242242
243243
OptiMill®
� OptiMill®-Uni-Trochoid 245
� OptiMill®-Steel-Trochoid 246
� OptiMill®-Titan-Trochoid 247
Solid carbide tools | Milling | OptiMill®
Milling cutters for
trochoidal millingIn many applications, trochoidal milling allows
signifi cant improvements to be achieved in tool
costs, clamping systems, machining times and
the load on the machine components compared
with conventional milling, particularly with high-
strength materials.
For this milling technology, MAPAL is extending its
OptiMill® product family.
Trochoidal milling in combination with the new
OptiMill® allows cutting edge lengths of 3xD that
could not be achieved with conventional tools to
date.O
pti
Mill®
-Tro
choid
244244
For this milling technology, MAPAL is extending its Op-
tiMill® product family. Trochoidal milling in combination
with the new OptiMill® allows cutting edge lengths of
3xD that could not be achieved with conventional tools
to date. Specially designed unequal spacing (EU spacing)
of the fi ve cutting edges combined with an innovative
geometrical design of the cutting wedge reduces the
excitation of vibration. Balancing (balancing quality 2.5)
undertaken during the manufacturing process further
reduces the risk of vibration. As such the patent-applied
milling cutter can even be used at extremely high spindle
speeds without problems. So that with the greater cutting
depths now possible, jamming does not occur due to the
long chips produced in the process, the tool designers
have also integrated a chip breaker that cuts the chips
in half. This feature safeguards the trouble-free removal
of the chips from the machine compartment. A special
tool adapter is not required for trochoidal milling using
the MAPAL milling cutters. However, if the potential of
trochoidal milling and the new milling cutter is to be
fully exploited, it is recommended to use the new MAPAL
HTC chuck. The chuck combines the very good damping
properties of hydraulic chucking technology with the high
holding forces of shrinking technology. The HTC reliably
transmits high torques. Even heating to 170° does not
aff ect the HTC chuck, as milling trials have confi rmed.
245
d 1 f8
L1
L2
L3
d 2 h
6
NP M
5,00 6 62 17 – 5 0,10 SCM580-0500Z05R-F0010HB-HP213 30564623 �
6,00 6 62 18 25 5 0,12 SCM580-0600Z05R-F0012HB-HP213 30564624 �
8,00 8 68 24 30 5 0,16 SCM580-0800Z05R-F0016HB-HP213 30564625 �
10,00 10 80 30 35 5 0,20 SCM580-1000Z05R-F0020HB-HP213 30564626 �
12,00 12 93 36 45 5 0,24 SCM580-1200Z05R-F0024HB-HP213 30564627 �
14,00 14 99 42 50 5 0,28 SCM580-1400Z05R-F0028HB-HP213 30564628 �
16,00 16 108 48 55 5 0,32 SCM580-1600Z05R-F0032HB-HP213 30564629 �
18,00 18 117 54 67 5 0,36 SCM580-1800Z05R-F0036HB-HP213 30564630 �
20,00 20 126 60 70 5 0,40 SCM580-2000Z05R-F0040HB-HP213 30564631 �
25,00 25 150 75 92 5 0,50 SCM580-2500Z05R-F0050HB-HP213 30564632 �
H
For machining values see technical notes.
Special designs and other coatings on request.
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
Design:Milling cutter diameter: 5,00 - 25,00 mm
Shank form: HB (DIN 6535)
Coating: HP213
Number of cutting edges:: z = 5, 1 blade on centre
Point geometry: Specifi c lead geometry
Helix angle: 41° – 42°
Balancing quality: Insert section balanced to
G2.5 to DIN ISO 1940-G2.5
Dimensions: Works standard – overlong
Application: Specially for trochoidal milling – part-
contact cutting / trimming. For cutting depths up to 3xD
with special chip breaker for optimum chip control.
Dimensions in mm.
OptiMill®-Uni-TrochoidSolid carbide HPC end milling cutter, overlong
SCM58
Dimensions Shank form HB
d1 f8 d2 h6 l1 l2 l3 z C Specifi cation Order No.
Solid carbide tools | Milling | OptiMill®
Opti
Mill®
-Tro
choid
246
P
5,00 6 62 17 5 0,10 SCM590-0500Z05R-F0010HB-HP723 30563365 �
6,00 6 62 18 25 5 0,12 SCM590-0600Z05R-F0012HB-HP723 30563366 �
8,00 8 68 24 30 5 0,16 SCM590-0800Z05R-F0016HB-HP723 30563367 �
10,00 10 80 30 35 5 0,20 SCM590-1000Z05R-F0020HB-HP723 30563368 �
12,00 12 93 36 45 5 0,24 SCM590-1200Z05R-F0024HB-HP723 30563369 �
14,00 14 99 42 50 5 0,28 SCM590-1400Z05R-F0028HB-HP723 30563370 �
16,00 16 108 48 55 5 0,32 SCM590-1600Z05R-F0032HB-HP723 30563371 �
18,00 18 117 54 67 5 0,36 SCM590-1800Z05R-F0036HB-HP723 30615879
20,00 20 126 60 70 5 0,40 SCM590-2000Z05R-F0040HB-HP723 30563372 �
25,00 25 150 75 92 5 0,50 SCM590-2500Z05R-F0040HB-HP723 30615113 �
M
d 1 f8
L1
L2
L3
d 2 h
6
For machining values see technical notes.
Special designs and other coatings on request.
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
Design:Milling cutter diameter: 5,00 - 25,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlCrN coating
Number of cutting edges:: z = 5, 1 blade on centre
Point geometry: Specific lead geometry
Helix angle: 41° – 42°
Balancing quality: Insert section balanced to
G2.5 to DIN ISO 1940-G2.5
Dimensions: Works standard – overlong
Application: Specially for trochoidal milling – part-
contact cutting / trimming. For cutting depths up to 3xD
with special chip breaker for optimum chip control.
OptiMill®-Steel-Trochoid Solid carbide HPC end milling cutter, overlong
SCM59
Dimensions Shank form HB
d1 f8 d2 h6 l1 l2 l3 z C Specification Order No.
Dimensions in mm.
Solid carbide tools | Milling | OptiMill®
247
d 1 f8
L1
L2
L3
d 2 h
6
5,00 6 62 17 – 5 0,1 SCM600-0500Z05R-R0010HB-HP219 30564633 �
6,00 6 62 18 25 5 0,1 SCM600-0600Z05R-R0010HB-HP219 30564634 �
8,00 8 68 24 30 5 0,2 SCM600-0800Z05R-R0020HB-HP219 30564635 �
10,00 10 80 30 35 5 0,2 SCM600-1000Z05R-R0020HB-HP219 30564636 �
12,00 12 93 36 45 5 0,3 SCM600-1200Z05R-R0030HB-HP219 30564637 �
14,00 14 99 42 50 5 0,3 SCM600-1400Z05R-R0030HB-HP219 30564638 �
16,00 16 108 48 55 5 0,3 SCM600-1600Z05R-R0030HB-HP219 30564639 �
18,00 18 117 54 67 5 0,3 SCM600-1800Z05R-R0030HB-HP219 30605011 �
20,00 20 126 60 70 5 0,3 SCM600-2000Z05R-R0030HB-HP219 30564640 �
25,00 25 150 75 92 5 0,4 SCM600-2500Z05R-R0040HB-HP219 30605016 �
S
For machining values see technical notes.
Special designs and other coatings on request.
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
Design:Milling cutter diameter: 5,00 - 25,00 mm
Shank form: HB (DIN 6535)
Coating: Special AlTiN coating
Number of cutting edges:: z = 5, 1 blade on centre
Point geometry: Specific lead geometry
Helix angle: 41° – 42°
Balancing quality: Insert section balanced to
G2.5 to DIN ISO 1940-G2.5
Dimensions: Works standard – overlong
Application: Specially for trochoidal milling – part-
contact cutting / trimming. For cutting depths up to 3xD
with higly polished chip flutes.
OptiMill®-Titan-Trochoid Solid carbide HPC end milling cutter, overlong
SCM60
Dimensions Shank form HB
d1 f8 d2 h6 l1 l2 l3 z R Specification Order No.
Dimensions in mm.
Solid carbide tools | Milling | OptiMill®
Opti
Mill®
-Tro
choid
248
249249
Solid carbide tools | Milling | OptiMill®-Alu
Solid carbide milling
cutters for machining
aluminiumThe OptiMill®-Alu and the OptiMill®-Alu-HPC are
particularly suitable for milling aluminium alloys,
plastics, copper alloys and other non-ferrous
metals.
The unequal cutting edge spacing of the
OptiMill®-Alu-HPC ensures absolutely smooth
running during machining.
Specially polished grooves prevent sticking of
chips and at the same time ensure optimised chip
discharge.
The OptiMill®-Mono-Alu for machining aluminium
with a low silicon content rounds off the
programme.
OptiMill®-Alu
� OptiMill®-Alu 250
� OptiMill®-Alu-HPC 251
� OptiMill®-Mono-Alu, type 200R 252
� OptiMill®-Mono-Alu, type 200L 253
� OptiMill®-Mono-Alu, type 200RY 254
OptiMill®-Alu
Opti
Mill®
–
mach
inin
g a
lum
iniu
m
250
N
2,00 6 57 6 2 0,03 SCM260-0200Z02R-F0003HA-HU211 30393580 �
3,00 6 57 8 2 0,05 SCM260-0300Z02R-F0005HA-HU211 30393581 �
4,00 6 57 11 2 0,06 SCM260-0400Z02R-F0006HA-HU211 30393582 �
5,00 6 57 13 2 0,08 SCM260-0500Z02R-F0008HA-HU211 30393583 �
6,00 6 57 13 2 0,09 SCM260-0600Z02R-F0009HA-HU211 30393584 �
8,00 8 63 19 2 0,12 SCM260-0800Z02R-F0012HA-HU211 30393585 �
10,00 10 72 22 2 0,15 SCM260-1000Z02R-F0015HA-HU211 30393586 �
12,00 12 83 26 2 0,18 SCM260-1200Z02R-F0018HA-HU211 30393587 �
16,00 16 92 32 2 0,24 SCM260-1600Z02R-F0024HA-HU211 30393588 �
20,00 20 104 38 2 0,30 SCM260-2000Z02R-F0030HA-HU211 30393589 �
d 2 h
6
d 1 h
10
l1
l2
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Alu
Design:Milling cutter diameter: 2,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 2, 1 blade above centre
Point geometry: Specific lead geometry
Helix angle: 45°
Dimensions: Similar to DIN 6527 – long
Application: Specially for milling aluminium alloys,
plastics, copper alloys and non-ferrous metals.
Dimensions in mm.
OptiMill®-AluSolid carbide slot end milling cutter, long | 45°
SCM26
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z C Specification Order No.
251
N
3,00 6 57 8 – 3 0,06 SCM270-0300Z03R-F0006HB-HU210 30393590 �
4,00 6 57 11 – 3 0,08 SCM270-0400Z03R-F0008HB-HU210 30393591 �
5,00 6 57 13 – 3 0,10 SCM270-0500Z03R-F0010HB-HU210 30393592 �
6,00 6 57 13 18 3 0,12 SCM270-0600Z03R-F0012HB-HU210 30393593 �
8,00 8 63 21 25 3 0,16 SCM270-0800Z03R-F0016HB-HU210 30393594 �
10,00 10 72 22 30 3 0,20 SCM270-1000Z03R-F0020HB-HU210 30393595 �
12,00 12 83 26 36 3 0,24 SCM270-1200Z03R-F0024HB-HU210 30393596 �
16,00 16 92 36 42 3 0,32 SCM270-1600Z03R-F0032HB-HU210 30393597 �
20,00 20 104 41 52 3 0,40 SCM270-2000Z03R-F0040HB-HU210 30393598 �
d 2 h
6
d 1 h
10
l1
l2
l3
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Alu
Design:Milling cutter diameter: 3,00 - 20,00 mm
Shank form: HB (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 3, right-hand helix
groove, 1 blade above centre
Point geometry: Specific lead geometry
Dimensions: Similar to DIN 6527 – long
Helix angle: 42° - 43°
Special features: Unequal pitch, grooves
polished, design with neck
Application: Specially for milling aluminium alloys,
copper alloys and non-ferrous metals.
Dimensions in mm.
OptiMill®-Alu-HPCSolid carbide HPC aluminium end milling cutter, long
SCM27
Dimensions Shank form HB
d1 h10 d2 h6 l1 l2 l3 z C Specification Order No.
Opti
Mill®
–
mach
inin
g a
lum
iniu
m
2,00 3 38 5 1 SCM280-0200Z01R-S-HA-HU211 30393706 �
2,50 3 38 6 1 SCM280-0250Z01R-S-HA-HU211 30393707 �
3,00 3 38 8 1 SCM280-0300Z01R-S-HA-HU211 30393708 �
3,00 4 38 8 1 SCM280-0300Z01R-S-HA-HU211 30393709 �
3,17 3 38 8 1 SCM280-0317Z01R-S-HA-HU211 30393710 �
3,17 5 38 8 1 SCM280-0317Z01R-S-HA-HU211 30393711 �
3,17 6 38 8 1 SCM280-0317Z01R-S-HA-HU211 30393712 �
4,00 4 40 12 1 SCM280-0400Z01R-S-HA-HU211 30393713 �
4,00 4 70 30 1 SCM280-0400Z01R-S-HA-HU211 30393714 �
4,00 6 50 10 1 SCM280-0400Z01R-S-HA-HU211 30393715 �
4,76 5 51 13 1 SCM280-0476Z01R-S-HA-HU211 30393716 �
4,76 6 51 13 1 SCM280-0476Z01R-S-HA-HU211 30393717 �
5,00 5 60 15 1 SCM280-0500Z01R-S-HA-HU211 30393718 �
5,00 5 70 30 1 SCM280-0500Z01R-S-HA-HU211 30393719 �
5,00 6 50 12 1 SCM280-0500Z01R-S-HA-HU211 30393720 �
6,00 6 60 20 1 SCM280-0600Z01R-S-HA-HU211 30393721 �
6,00 6 70 30 1 SCM280-0600Z01R-S-HA-HU211 30393722 �
6,00 6 80 38 1 SCM280-0600Z01R-S-HA-HU211 30393723 �
6,00 6 70 15 1 SCM280-0600Z01R-S-HA-HU211 30393724 �
6,00 6 50 12 1 SCM280-0600Z01R-S-HA-HU211 30393725 �
6,35 6 51 16 1 SCM280-0635Z01R-S-HA-HU211 30393726 �
8,00 8 60 20 1 SCM280-0800Z01R-S-HA-HU211 30393727 �
8,00 8 80 38 1 SCM280-0800Z01R-S-HA-HU211 30393728 �
10,00 10 75 30 1 SCM280-1000Z01R-S-HA-HU211 30393729 �
10,00 10 60 25 1 SCM280-1000Z01R-S-HA-HU211 30393730 �
10,00 10 100 25 1 SCM280-1000Z01R-S-HA-HU211 30393731 �
10,00 12 90 25 1 SCM280-1000Z01R-S-HA-HU211 30393732 �
12,70 13 89 29 1 SCM280-1270Z01R-S-HA-HU211 30393733 �
d2 d1
l1
l2
N
252
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Alu
Dimensions in mm.
Design:Milling cutter diameter: 2,00 - 12,70 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 1, right-hand
helix groove
Helix angle: 30°
Application: Especially for milling aluminium
with a low silicon content.
OptiMill®-Mono-Alu type 200RSolid carbide end milling cutter, right fluted
SCM28
Dimensions Shank form HA
d1 d2 l1 l2 z Specification Order No.
253
2,50 3 38 6 1 SCM280-0250Z01L-S-HA-HU211 30393734 �
3,00 4 38 8 1 SCM280-0300Z01L-S-HA-HU211 30393735 �
3,17 6,35 38 8 1 SCM280-0317Z01L-S-HA-HU211 30393736 �
4,00 4 40 12 1 SCM280-0400Z01L-S-HA-HU211 30393737 �
4,00 6 50 10 1 SCM280-0400Z01L-S-HA-HU211 30393738 �
4,76 6,35 51 13 1 SCM280-0476Z01L-S-HA-HU211 30393739 �
5,00 5 60 15 1 SCM280-0500Z01L-S-HA-HU211 30393740 �
5,00 6 50 12 1 SCM280-0500Z01L-S-HA-HU211 30393741 �
6,00 6 60 15 1 SCM280-0600Z01L-S-HA-HU211 30393742 �
6,35 6,35 51 16 1 SCM280-0635Z01L-S-HA-HU211 30393743 �
8,00 8 60 20 1 SCM280-0800Z01L-S-HA-HU211 30393744 �
10,00 10 60 25 1 SCM280-1000Z01L-S-HA-HU211 30393745 �
d2 d1
l1
l2
N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Dimensions in mm.
Design:Milling cutter diameter: 2,50 – 10.00 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 1, left-hand
helix groove
Helix angle: 30°
Application: Especially for milling aluminium
with a low silicon content.
OptiMill®-Mono-Alu type 200LSolid carbide end milling cutter, left fluted
SCM28
Solid carbide tools | Milling | OptiMill®-Alu
Dimensions Shank form HA
d1 d2 l1 l2 z Specification Order No.
Opti
Mill®
–
mach
inin
g a
lum
iniu
m
254
5,00 6 4,9 70 30 20 1 1 SCM280-0500Z01R-R0100HA-HU211 30393755 �
6,00 8 5,6 80 35 20 1 1,5 SCM280-0600Z01R-R0150HA-HU211 30393756 �
8,00 10 7,6 90 45 22 1 1,5 SCM280-0800Z01R-R0150HA-HU211 30393757 �
10,00 10 9,5 100 50 25 1 2 SCM280-1000Z01R-R0200HA-HU211 30393758 �
10,00 12 9,5 90 50 25 1 2 SCM280-1000Z01R-R0200HA-HU211 30393759 �
12,00 12 11,5 120 60 30 1 2,5 SCM280-1200Z01R-R0250HA-HU211 30393760 �
d2
d1d3
R
l1
l2
l3
N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Alu
Dimensions in mm.
Design:Milling cutter diameter: 5,00 - 12,00 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 1, right-hand
helix groove
Helix angle: 30°
Application: Especially for milling aluminium
with a low silicon content.
OptiMill®-Mono-Alu type 200RYSolid carbide end milling cutter, right fluted
SCM28
Dimensions Shank form HA
d1 d2 d3 l1 l3 l2 z R Specification Order No.
255
Solid carbide tools | Milling | OptiMill®-Inox
Solid carbide end milling
cutter for machining
stainless materialsThese solid carbide end milling cutters OptiMill®-
Inox are particularly suitable for machining nickel
materials, highly heat resisting materials (CrNi and
CrNiCo steels) and acid-resistant steels.
OptiMill®-Inox
� OptiMill®-Inox 256
OptiMill®-Inox
Opti
Mill®
–
stain
less
mate
rials
256
2,00 2 32 8 4 SCM290-0200Z04R-S-HA-HP214 30393599 �
3,00 3 32 12 4 SCM290-0300Z04R-S-HA-HP214 30393601 �
4,00 4 40 12 4 SCM290-0400Z04R-S-HA-HP214 30393602 �
5,00 5 50 14 4 SCM290-0500Z04R-S-HA-HP214 30393603 �
6,00 6 50 16 4 SCM290-0600Z04R-S-HB-HP214 30393604 �
8,00 8 60 20 4 SCM290-0800Z04R-S-HB-HP214 30393605 �
10,00 10 72 22 4 SCM290-1000Z04R-S-HB-HP214 30393606 �
12,00 12 72 22 4 SCM290-1200Z04R-S-HB-HP214 30393607 �
16,00 16 75 25 4 SCM290-1600Z04R-S-HB-HP214 30393608 �
20,00 20 100 32 4 SCM290-2000Z04R-S-HB-HP214 30393609 �
M S
d 2 h
6
d 1 h
10
l1
l2
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-InoxSolid carbide end milling cutter | 30°
SCM29
Design:Milling cutter diameter: 2,00 - 20,00 mm
Shank form: Shank up to ø 5 mm: HA (DIN 6535);
from shank ø 6 mm: HB (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 4, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: To works' standard
Application: Milling of nickel materials, highly heat resisting
materials (CrNi and CrNiCo steels) and acid-resistant steels.
Solid carbide tools | Milling | OptiMill®-Inox
Dimensions in mm.
Dimensions Shank form HA / HB
d1 h10 d2 h6 l1 l2 z Specification Order No.
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
257257
Solid carbide tools | Milling | OptiMill®-Hardened
Solid carbide milling
cutters for hard machiningThe solid carbide milling cutters OptiMill®-
Hardened for hard machining materials with
50-65 HRC have been specially developed for
circumferential milling and copy milling. An extra
long design is available for machining workpieces
with tool restrictions.
OptiMill®-Hardened
OptiMill®-Hardened
� OptiMill®-Hardened, long design 258
� OptiMill®-Hardened 259
� OptiMill®-Hardened-Radius 260
Opti
Mill®
–
hard
mach
inin
g
H
6,00 6 62 18 6 SCM300-0600Z06R-S-HA-HP214 30393479 �
8,00 8 68 24 6 SCM300-0800Z06R-S-HA-HP214 30393480 �
10,00 10 80 30 6 SCM300-1000Z06R-S-HA-HP214 30393481 �
12,00 12 93 36 6 SCM300-1200Z06R-S-HA-HP214 30393482 �
14,00 14 99 42 6 SCM300-1400Z06R-S-HA-HP214 30393483 �
16,00 16 108 48 8 SCM300-1600Z08R-S-HA-HP214 30393484 �
18,00 18 114 54 8 SCM300-1800Z08R-S-HA-HP214 30393485 �
20,00 20 126 60 8 SCM300-2000Z08R-S-HA-HP214 30393486 �
d 2 h
6
d 1 h
10
l1
l2z = 6 z = 8
258
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Hardened
Design:Milling cutter diameter: 6,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 6 to ø 14 mm,
z = 8 from ø 16 mm,
not cutting on centre or
above centre
Point geometry: Specific lead geometry
Helix angle: 50°
Dimensions: Works standard – overlong
Application: Circumferential milling of tool steel and
hardened steel from 50 to 65 HRC.
Dimensions in mm.
OptiMill®-HardenedSolid carbide end milling cutter, overlong | 50°
SCM30, long design
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z Specification Order No.
259
H
4,00 6 57 11 6 SCM310-0400Z06R-S-HA-HP214 30393488 �
5,00 6 57 13 6 SCM310-0500Z06R-S-HA-HP214 30393489 �
6,00 6 57 13 6 SCM310-0600Z06R-S-HA-HP214 30393490 �
8,00 8 63 19 6 SCM310-0800Z06R-S-HA-HP214 30393491 �
10,00 10 72 22 6 SCM310-1000Z06R-S-HA-HP214 30393492 �
12,00 12 83 26 6 SCM310-1200Z06R-S-HA-HP214 30393493 �
14,00 14 83 26 6 SCM310-1400Z06R-S-HA-HP214 30393494 �
16,00 16 92 32 8 SCM310-1600Z08R-S-HA-HP214 30393497 �
18,00 18 92 32 8 SCM310-1800Z08R-S-HA-HP214 30393498 �
20,00 20 104 38 8 SCM310-2000Z08R-S-HA-HP214 30393499 �
d 2 h
6
d 1 h
10
l1
l2z = 6 z = 8
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Hardened
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 6 to ø 14 mm,
z = 8 from ø 16 mm,
not cutting above centre
Point geometry: Specific lead geometry
Helix angle: 50°
Dimensions: Similar to DIN 6527 – long
Application: Circumferential milling of tool steel
and hardened steel from 50 to 65 HRC.
OptiMill®-HardenedSolid carbide end milling cutter, long | 50°
SCM31
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z Specification Order No.
Opti
Mill®
–
hard
mach
inin
g
260
H
1,00 4 50 1,5 2 0,5 SCM320-0100Z02R-R0050HA-HP214 30393621 �
1,50 4 50 2,5 2 0,75 SCM320-0150Z02R-R0075HA-HP214 30393622 �
2,00 6 50 3,0 2 1,0 SCM320-0200Z02R-R0100HA-HP214 30393624 �
2,50 6 50 4,0 2 1,25 SCM320-0250Z02R-R0125HA-HP214 30393625 �
3,00 6 70 5,0 2 1,5 SCM320-0300Z02R-R0150HA-HP214 30393626 �
4,00 6 70 6,0 2 2,0 SCM320-0400Z02R-R0200HA-HP214 30393627 �
5,00 6 80 8,0 2 2,5 SCM320-0500Z02R-R0250HA-HP214 30393628 �
6,00 6 90 9,0 2 3,0 SCM320-0600Z02R-R0300HA-HP214 30393629 �
8,00 8 100 12,0 2 4,0 SCM320-0800Z02R-R0400HA-HP214 30393630 �
10,00 10 100 15,0 2 5,0 SCM320-1000Z02R-R0500HA-HP214 30393631 �
12,00 12 110 18,0 2 6,0 SCM320-1200Z02R-R0600HA-HP214 30393632 �
16,00 16 140 25,0 2 8,0 SCM320-1600Z02R-R0800HA-HP214 30393633 �
20,00 20 160 30,0 2 10,0 SCM320-2000Z02R-R1000HA-HP214 30393634 �
d 2 h
6
d 1 h
10
l1
l2
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Hardened
Dimensions in mm.
Design:Milling cutter diameter: 1,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 2, 2 blades on centre
Point geometry: Specific lead geometry
Helix angle: 30°
Dimensions: Similar to DIN 6527 – overlong
Application: Copy milling of tool steel and hardened steels
from 50 to 65 HRC.
OptiMill®-Hardened-RadiusSolid carbide radius milling cutter, overlong | 30°
SCM32
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z R Specification Order No.
261261261
Solid carbide tools | Milling
Milling of plastic materials
and titaniumProducts of lightweight design are playing an
ever more important role in meeting the growing
demand for weight reduction. An excerpt from the
MAPAL tool range for modern lightweight materi-
als can be found here in chapter.
OptiMill®-Mono-Plastic milling tools are versatile
in use and are characterised by high machining
quality, long tool life and suitability for high-
performance machining. The OptiMill®-Mono
end milling cutters impress with their compact
construction and polished chip flutes, and their
ease of use.
Titanium is particularly suitable for applications in
which high corrosion resistance, strength and low
weight are required. Titanium has a low thermal
OptiMill®-Mono-Plastic
� OptiMill®-Mono-Plastic, type 100R 262
� OptiMill®-Mono-Plastic, type 100L 263
� Performance EndMill-Titan 264
OptiMill®-Mono-Plastic
conductivity and is also very ductile, aspects that
require a full understanding of the process du-
ring machining. Depending on the cutting depth,
milling operations can be performed dry with the
PerformanceMill-Titan. MAPAL has developed the
PerformanceMill-Titan specially to meet these high
demands.
Opti
Mill®
–
pla
stic
s/ti
taniu
m
2,00 3 38 8 1 SCM330-0200Z01R-S-HA-HU211 30393650 �
2,50 3 38 8 1 SCM330-0250Z01R-S-HA-HU211 30393651 �
3,00 3 38 10 1 SCM330-0300Z01R-S-HA-HU211 30393652 �
3,00 4 38 10 1 SCM330-0300Z01R-S-HA-HU211 30393653 �
3,00 4 50 15 1 SCM330-0300Z01R-S-HA-HU211 30393654 �
3,00 6 50 10 1 SCM330-0300Z01R-S-HA-HU211 30393655 �
3,17 6,35 38 13 1 SCM330-0317Z01R-S-HA-HU211 30393656 �
3,17 4,75 38 13 1 SCM330-0317Z01R-S-HA-HU211 30393657 �
3,17 3,17 51 13 1 SCM330-0317Z01R-S-HA-HU211 30393658 �
4,00 4 40 12 1 SCM330-0400Z01R-S-HA-HU211 30393659 �
4,00 4 60 20 1 SCM330-0400Z01R-S-HA-HU211 30393660 �
4,00 4 70 30 1 SCM330-0400Z01R-S-HA-HU211 30393661 �
4,00 6 50 15 1 SCM330-0400Z01R-S-HA-HU211 30393662 �
4,00 4 50 13 1 SCM330-0400Z01R-S-HA-HU211 30393663 �
4,76 4,75 51 16 1 SCM330-0476Z01R-S-HA-HU211 30393664 �
5,00 5 50 16 1 SCM330-0500Z01R-S-HA-HU211 30393665 �
5,00 5 70 30 1 SCM330-0500Z01R-S-HA-HU211 30393666 �
5,00 5 60 15 1 SCM330-0500Z01R-S-HA-HU211 30393667 �
5,00 6 50 16 1 SCM330-0500Z01R-S-HA-HU211 30393668 �
6,00 6 60 21 1 SCM330-0600Z01R-S-HA-HU211 30393669 �
6,00 6 70 30 1 SCM330-0600Z01R-S-HA-HU211 30393670 �
6,00 6 80 38 1 SCM330-0600Z01R-S-HA-HU211 30393671 �
6,35 6,35 51 19 1 SCM330-0635Z01R-S-HA-HU211 30393672 �
6,35 6,35 77 38 1 SCM330-0635Z01R-S-HA-HU211 30393673 �
8,00 8 60 25 1 SCM330-0800Z01R-S-HA-HU211 30393674 �
8,00 8 80 38 1 SCM330-0800Z01R-S-HA-HU211 30393675 �
9,52 9,52 77 29 1 SCM330-0952Z01R-S-HA-HU211 30393676 �
10,00 10 75 30 1 SCM330-1000Z01R-S-HA-HU211 30393677 �
10,00 10 75 20 1 SCM330-1000Z01R-S-HA-HU211 30393678 �
12,00 12 75 30 1 SCM330-1200Z01R-S-HA-HU211 30393679 �
12,70 12,70 77 32 1 SCM330-1270Z01R-S-HA-HU211 30393680 �
d2 d1
l1
l2
262
N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Solid carbide tools | Milling | OptiMill®-Mono-Plastic
Dimensions in mm.
Design:Milling cutter diameter: 2,00 - 12,70 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 1, right-hand helix groove
Helix angle: 25°
Application: Especially for milling plastics.
OptiMill®-Mono-Plastic type 100RSolid carbide end milling cutter, right fluted
SCM33
Dimensions Shank form HA
d1 d2 l1 l2 z Specification Order No.
263
2,00 3 38 8 1 SCM330-0200Z01L-S-HA-HU211 30393681 �
2,50 3 38 8 1 SCM330-0250Z01L-S-HA-HU211 30393682 �
3,00 3 38 10 1 SCM330-0300Z01L-S-HA-HU211 30393683 �
3,00 4 38 10 1 SCM330-0300Z01L-S-HA-HU211 30393684 �
3,00 4 50 15 1 SCM330-0300Z01L-S-HA-HU211 30393685 �
3,00 6 50 10 1 SCM330-0300Z01L-S-HA-HU211 30393686 �
3,17 6,35 38 13 1 SCM330-0317Z01L-S-HA-HU211 30393687 �
4,00 4 40 12 1 SCM330-0400Z01L-S-HA-HU211 30393688 �
4,00 4 60 20 1 SCM330-0400Z01L-S-HA-HU211 30393689 �
4,00 4 70 30 1 SCM330-0400Z01L-S-HA-HU211 30393690 �
4,00 6 50 15 1 SCM330-0400Z01L-S-HA-HU211 30393691 �
4,00 4 50 13 1 SCM330-0400Z01L-S-HA-HU211 30393692 �
4,76 4,76 51 16 1 SCM330-0476Z01L-S-HA-HU211 30393693 �
4,76 6,35 51 16 1 SCM330-0476Z01L-S-HA-HU211 30393694 �
5,00 5 50 16 1 SCM330-0500Z01L-S-HA-HU211 30393695 �
5,00 5 70 30 1 SCM330-0500Z01L-S-HA-HU211 30393696 �
5,00 5 60 15 1 SCM330-0500Z01L-S-HA-HU211 30393697 �
6,00 6 60 20 1 SCM330-0600Z01L-S-HA-HU211 30393698 �
6,00 6 70 30 1 SCM330-0600Z01L-S-HA-HU211 30393699 �
6,00 6 80 38 1 SCM330-0600Z01L-S-HA-HU211 30393700 �
6,35 6,35 51 19 1 SCM330-0635Z01L-S-HA-HU211 30393701 �
8,00 8 60 25 1 SCM330-0800Z01L-S-HA-HU211 30393702 �
8,00 8 80 38 1 SCM330-0800Z01L-S-HA-HU211 30393703 �
10,00 10 75 30 1 SCM330-1000Z01L-S-HA-HU211 30393704 �
10,00 10 75 20 1 SCM330-1000Z01L-S-HA-HU211 30393705 �
d2 d1
l1
l2
N
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Dimensions in mm.
Solid carbide tools | Milling | OptiMill®-Mono-Plastic
OptiMill®-Mono-Plastic type 100LSolid carbide end milling cutter, left fluted
SCM33
Design:Milling cutter diameter: 2.00 – 10.00 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 1, left-hand helix groove
Helix angle: 25°
Application: Especially for milling plastics.
Dimensions Shank form HA
d1 d2 l1 l2 z Specification Order No.
Opti
Mill®
–
pla
stic
s/ti
taniu
m
264
d 2 d 1
l1
l
2l
3
6,00 6 57 13 20 4 0,12 SCM390-0600Z04R-F0012HB-HU621 30395593 �
6,00 6 57 13 20 4 0,5 SCM390-0600Z04R-R0050HB-HU621 30395594 �
8,00 8 63 19 25 4 0,16 SCM390-0800Z04R-F0016HB-HU621 30395595 �
8,00 8 63 19 25 4 0,5 SCM390-0800Z04R-R0050HB-HU621 30395596 �
10,00 10 72 22 30 4 0,20 SCM390-1000Z04R-F0020HB-HU621 30395597 �
10,00 10 72 22 30 4 0,5 SCM390-1000Z04R-R0050HB-HU621 30395598 �
10,00 10 72 22 30 4 1,0 SCM390-1000Z04R-R0100HB-HU621 30395599 �
12,00 12 83 26 36 4 0,24 SCM390-1200Z04R-F0024HB-HU621 30395600 �
12,00 12 83 26 36 4 0,5 SCM390-1200Z04R-R0050HB-HU621 30395601 �
12,00 12 83 26 36 4 1,0 SCM390-1200Z04R-R0100HB-HU621 30395602 �
12,00 12 83 26 36 4 1,5 SCM390-1200Z04R-R0150HB-HU621 30395603 �
14,00 14 83 26 36 4 0,28 SCM390-1400Z04R-F0028HB-HU621 30395604 �
14,00 14 83 26 36 4 1,0 SCM390-1400Z04R-R0100HB-HU621 30395605 �
16,00 16 92 36 42 4 0,32 SCM390-1600Z04R-F0032HB-HU621 30395606 �
16,00 16 92 36 42 4 1,0 SCM390-1600Z04R-R0100HB-HU621 30395607 �
16,00 16 92 36 42 4 1,5 SCM390-1600Z04R-R0150HB-HU621 30395609 �
16,00 16 92 36 42 4 2,0 SCM390-1600Z04R-R0200HB-HU621 30395610 �
20,00 20 104 41 55 4 0,40 SCM390-2000Z04R-F0040HB-HU621 30395611 �
20,00 20 104 41 55 4 1,5 SCM390-2000Z04R-R0150HB-HU621 30395612 �
20,00 20 104 41 55 4 2,0 SCM390-2000Z04R-R0200HB-HU621 30395613 �
20,00 20 104 41 55 4 2,5 SCM390-2000Z04R-R0250HB-HU621 30395614 �
S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Design:Milling cutter diameter: 6,00 - 20,0 mm
Shank form: HB (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 4
Point geometry: available with angular
radius and angular chamfer
Helix angle: ~ 39°
Application: Roughing and finishing titanium.
Performance EndMill-TitanSolid carbide end milling cutter
SCM39
Dimensions C R Shank form HA
d1 d2 l1 l2 l3 z Specification Order No.
Solid carbide tools | Milling | Performance EndMill-Titan
Dimensions in mm.
265
d 2 d 1
l1
l
2l
3
6,00 6 57 13 20 4 0,12 SCM391-0600Z04R-F0012HB-HU621 30395565 �
6,00 6 57 13 20 4 0,5 SCM391-0600Z04R-R0050HB-HU621 30395566 �
8,00 8 63 19 25 4 0,16 SCM391-0800Z04R-F0016HB-HU621 30395568 �
8,00 8 63 19 25 4 0,5 SCM391-0800Z04R-R0050HB-HU621 30395569 �
10,00 10 72 22 30 4 0,20 SCM391-1000Z04R-F0020HB-HU621 30395570 �
10,00 10 72 22 30 4 0,5 SCM391-1000Z04R-R0050HB-HU621 30395571 �
10,00 10 72 22 30 4 1,0 SCM391-1000Z04R-R0100HB-HU621 30395572 �
12,00 12 83 26 36 4 0,24 SCM391-1200Z04R-F0024HB-HU621 30395573 �
12,00 12 83 26 36 4 0,5 SCM391-1200Z04R-R0050HB-HU621 30395574 �
12,00 12 83 26 36 4 1,0 SCM391-1200Z04R-R0100HB-HU621 30395575 �
12,00 12 83 26 36 4 1,5 SCM391-1200Z04R-R0150HB-HU621 30395576 �
14,00 14 83 26 36 4 0,28 SCM391-1400Z04R-F0028HB-HU621 30395577 �
14,00 14 83 26 36 4 1,0 SCM391-1400Z04R-R0100HB-HU621 30395578 �
16,00 16 92 36 42 4 0,32 SCM391-1600Z04R-F0032HB-HU621 30395579 �
16,00 16 92 36 42 4 1,0 SCM391-1600Z04R-R0100HB-HU621 30395580 �
16,00 16 92 36 42 4 1,5 SCM391-1600Z04R-R0150HB-HU621 30395581 �
16,00 16 92 36 42 4 2,0 SCM391-1600Z04R-R0200HB-HU621 30395582 �
20,00 20 104 41 55 4 0,40 SCM391-2000Z04R-F0040HB-HU621 30395583 �
20,00 20 104 41 55 4 1,5 SCM391-2000Z04R-R0150HB-HU621 30395584 �
20,00 20 104 41 55 4 2,0 SCM391-2000Z04R-R0200HB-HU621 30395585 �
20,00 20 104 41 55 4 2,5 SCM391-2000Z04R-R0250HB-HU621 30395586 �
S
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Performance EndMill-TitanSolid carbide end milling cutter, internal coolant supply
SCM39
Solid carbide tools | Milling | Performance EndMill-Titan
Design:Milling cutter diameter: 6,00 - 20,0 mm
Shank form: HB (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 4
Point geometry: available with angular
radius and angular chamfer
Helix angle: ~ 39°
Application: Roughing and finishing titanium.
No axial plungeing possible - max. 3° ramping.
Dimensions C R Shank form HA
d1 d2 l1 l2 l3 z Specification Order No.
Dimensions in mm.
Opti
Mill®
–
pla
stic
s/ti
taniu
m
266266
267267
Solid carbide tools | Milling | OptiMill®-Chamfer and OptiMill®-DrillMill
Solid carbide deburring
end milling cutter and drill
milling cutterThe OptiMill® solid carbide deburring end milling
cutters are highly suitable for the cost-effective
deburring of premachined parts.
The OptiMill® drill milling cutters permit a
combination of drilling and milling in a single tool.
Particularly for use in sheet metals and parts with
thin walls, tool changing times and tool costs can
be saved with these cutters.
OptiMill®-Chamfer and OptiMill®-DrillMill
� OptiMill®-Chamfer 268
� OptiMill®-DrillMill 269
OptiMill®-Chamfer and OptiMill®-DrillMill
Opti
Mill®
–
deburr
ing a
nd d
rill m
illing
268
K1 K2MP N
4,00 4 54 9 4 SCM340-0400Z04R-HA-HP214 30393635 �
6,00 6 54 12 4 SCM340-0600Z04R-HA-HP214 30393636 �
8,00 8 58 15 4 SCM340-0800Z04R-HA-HP214 30393637 �
10,00 10 66 16 4 SCM340-1000Z04R-HA-HP214 30393638 �
12,00 12 73 18 4 SCM340-1200Z04R-HA-HP214 30393639 �
16,00 16 82 25 4 SCM340-1600Z04R-HA-HP214 30393640 �
20,00 20 92 30 4 SCM340-2000Z04R-HA-HP214 30393641 �
d 2 h
6
d 1 ±
0,01
l1
l2
90°
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
Dimensions in mm.
Design:Milling cutter diameter: 4,00 - 20,00 mm
Shank form: HA (DIN 6535)
Coating: Special TiAlN coating
Number of cutting edges: z = 4
Point geometry: Specific lead geometry
Tip angle: 90°
Helix angle: 0°
Dimensions: To works' standard
Application: Of universal application, suitable for both
high-strength materials and for aluminium and non-
ferrous metals!
OptiMill®-ChamferSolid carbide deburring end milling cutters | 90°
SCM34
Solid carbide tools | Milling | OptiMill®-Chamfer and OptiMill®-DrillMill
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z Specification Order No.
269
K1 K2MP N
3,00 6 57 8 2 SCM350-0300Z02R-HA-HU211 30393642 �
4,00 6 57 11 2 SCM350-0400Z02R-HA-HU211 30393643 �
5,00 6 57 13 2 SCM350-0500Z02R-HA-HU211 30393644 �
6,00 6 57 13 2 SCM350-0600Z02R-HA-HU211 30393645 �
8,00 8 63 19 2 SCM350-0800Z02R-HA-HU211 30393646 �
10,00 10 72 22 2 SCM350-1000Z02R-HA-HU211 30393647 �
12,00 12 83 26 2 SCM350-1200Z02R-HA-HU211 30393648 �
16,00 16 92 32 2 SCM350-1600Z02R-HA-HU211 30393649 �
d 2 h
6
d 1 h
10
l1
l2
90°
� Available from stock in Germany
� No stockage of standard tool (delivery time on request)
For machining values see technical notes.
Special designs and other coatings on request.
OptiMill®-DrillMillSolid carbide drill milling cutter, long | 90°
SCM35
Dimensions in mm.
Design:Milling cutter diameter: 3.00 - 16.00 mm
Shank form: HA (DIN 6535)
Coating: Uncoated
Number of cutting edges: z = 2, 2 blades on centre
Point geometry: Specific lead geometry
Tip angle: 90°
Helix angle: 30°
Dimensions: Similar to DIN 6527 – long
Application: Of universal application, suitable for both
high-strength materials and for aluminium and non-
ferrous metals!
Solid carbide tools | Milling | OptiMill®-Chamfer and OptiMill®-DrillMill
Dimensions Shank form HA
d1 h10 d2 h6 l1 l2 z Specification Order No.
Opti
Mill®
–
deburr
ing a
nd d
rill m
illing
top related