Transcript
8/8/2019 Olympus Cam Manual
1/89
DIGITAL CAMERA
InstructionManual
Getting to know your
camera better
Quick Start Guide
Button operations
Menu operations
Printing pictures
Using OLYMPUS Master
Appendix
SP-570UZ
8/8/2019 Olympus Cam Manual
2/89
2 EN
Contents
Quick Start Guide P.3
Camera diagram P.11 Learn the names of the camera partsand get a general grasp of the
cameras functions. Use this sectionas reference for the functions.
Button operations P.16Test out the functions of the camerabuttons by following the illustrations
and trying them out on the camera.
Operations using the control panel P.29 Learn how to use the control panel toperform basic operations, and then trythem out.
Menu operations P.32 Learn everything about the menus,from basic operations to the functions
of each menu and their varioussettings.
Printing pictures P.59Learn how to print pictures you havetaken.
Using OLYMPUS Master P.64Learn how to transfer and savepictures to a computer.
Getting to know your camera better P.68Find out more about your camera and
learn what to do when you have aquestion regarding operations.
Appendix P.81Read about convenient functions andsafety precautions on how to use your
camera more effectively.
8/8/2019 Olympus Cam Manual
3/89
EN 3
QuickStartGuide
Gather these items (box contents)
Pull the strap tight so that it does not come loose.
Digital Camera StrapLens Cap
Lens Cap String
AA Batteries (four) USB cable AV Cable OLYMPUS Master 2
CD-ROM
Items not shown: Instruction Manual (this manual), warranty card.
Contents may vary depending on purchase location.
Attach the strap and the lens cap
34
Attach the strap to the other eyelet
in the same manner.
8/8/2019 Olympus Cam Manual
4/89
4 EN
QuickStartGuide
Prepare the camera
a. Load batteries into the camera
1
2
3
5
6
7
4
Slide the battery compartment
lock from) to= and ensurethat the battery compartment
cover is securely locked (7).Failure to do so may cause the
battery compartment cover toopen during shooting and the
batteries to fall out, resulting in
loss of image data.
Battery compartmentlock
8/8/2019 Olympus Cam Manual
5/89
EN 5
QuickStartGuide
Prepare the camera
b. Insert the (optional) xD-Picture Card into the camera
This camera allows you to take pictures without using an optional xD-
Picture Card (hereinafter called the card). When taking pictureswithout the card, pictures will be stored in the internal memory.
For details on the card, please refer to The card (P.85).
4
5
3
21
Card cover
Notch
Contact area
Make sure the card is correctly
oriented and insert it straight into
the card slot.Insert the card until it clicks into place.
To remove the card, push it all the way
in, release it slowly and remove.
8/8/2019 Olympus Cam Manual
6/89
6 EN
QuickStartGuide
Turn the camera on
This explains how to turn on the camera in shooting mode.
a. Set the mode dial toh.
Still picture shooting modes
b. Remove the lens cap and set the cameras power
switch to ON.
To turn off the camera, set the power switch to OFF.
h The camera determines the optimum settings for the shooting conditions
automatically.P The camera automatically sets the optimum aperture value and shutter speed.A This function allows you to change the aperture manually.S This function allows you to change the shutter speed manually.M This function allows you to change the aperture and shutter speed manually.r This function allows you to set each shooting function manually and use as
your original shooting mode.
s This function allows you to shoot pictures by selecting a scene according tothe shooting condition.
g This function allows you to set the target items by following the shootingguide displayed on the screen.
When shooting movies(shooting mode)
When shootingstill pictures
(shooting mode)
When viewing pictures(playback mode)
When the date and time havenot yet been set, this screenwill appear.
X
Y M
Y M D
D TIME
---- -- -- -- --
MENUCANCELPower switch
Tips
The directions of the arrow pad are indicated with
1243 in this manual.4 3
2
1
8/8/2019 Olympus Cam Manual
7/89
EN 7
QuickStartGuide
Set date and time
a. Press the1z button and the2Y button toselect [Y]. The first two digits of [Y] are fixed.
b. Press the 3# button.
c. Press the1z button and the2Y button to select [M].
About the date and time setting screen
Y-M-D (Year-Month-Day)
Exits a setting.
Minute
Date formats (Y/M/D, M/D/Y, D/M/Y)
Hour
X
Y M
Y M D
D TIME
---- -- -- -- --
MENUCANCEL
1 z button
2Y button
2008 -- -- -- --
X
Y M
Y M D
D TIME
MENUCANCEL
3# button
2008 08 -- -- --
X
Y M
Y M D
D TIME
MENUCANCEL
8/8/2019 Olympus Cam Manual
8/89
8 EN
QuickStartGuide
Set date and time
d. Press the 3# button.e. Press the1z button and the2Y button to select [D].f. Press the 3# button.g. Press the1z button and the2Y button to select the hours
and minutes. The time is displayed in the 24-hour
format.
h. Press the 3# button.i. Press the1z button and the2Y button to select [Y/M/D].j. After all items have been set,
press theo button. For precise time setting, press the o button as the time signal
strikes 00 seconds.
2008 08 26 -- --
X
Y M
Y M D
D TIME
MENUCANCEL
2008 08 26 12 30
OK
X
Y M
Y M D
D TIME
MENUCANCEL SET
2008 08 26 12 30
OK
X
Y M D
TIME
MENUCANCEL SET
YY MM DD
o button
10M10M44IN
AUTO
NORMNORM
The number of remaining still
pictures is displayed.
8/8/2019 Olympus Cam Manual
9/89
EN 9
QuickStartGuide
Take a picture
a. Hold the camera
b. Focus
The AF target mark lights in green when the focus and exposureare locked. The shutter speed and aperture value are displayed.
If the AF target mark blinks in red, the focus is not adjusted
properly. Try locking the focus again.c. Shoot
a. Press theu button.b. While looking through the
viewfinder, rotate the diopteradjustment dial little by little.
When you can see the icons in theviewfinder clearly, adjustment iscomplete.
10M10M44IN
AUTO
NORMNORM
Horizontal grip Vertical grip
Shutter button
AF target mark
1/4001/400 F3.5F3.5
AUTO
(PressedHalfway)
Shutter button
The card access lamp blinks.
(PressedCompletely)
Adjusting the viewfinders focus using the diopter
Diopter adjustment dial
u button
Viewfinder
8/8/2019 Olympus Cam Manual
10/89
10 EN
QuickStartGuide
View pictures
a. Set the mode dial toq.
a. Press the4& button and the3# button to displaythe picture you want to erase.
b. Press thef/S button.
c. Press the1z button to select [YES], and presstheo button to erase the picture.
Arrow pad
Next Picture
Prev. Picture
Mode Dial
11IN10M10M
2008.08.262008.08.26 12:3012:30 100-0001100-0001NORMNORM
Erase pictures
ERASEERASE
OK
IN
NONOYES
SETCANCEL MENU
f/S button
3# button4& button
1 z button
o button
INRASEERASE
NO
YESYES
OKSETCANCEL MENU
8/8/2019 Olympus Cam Manual
11/89
EN 11
Camera diagram
Camera
Flash (P.23, P.43)
Microphone
Strap Eyelet (P.3)Lens
Shutter Button(P.9, P.21)
F Button (ExposureCompensation) (P.22)
Strap Eyelet (P.3)
AF/MF Switch(P.24)
j Button (Drive)(P.24)
#UP Button (Flash Pop-up)(P.23)
Connector Cover
(P.56, P.59, P.65)
Multi-connector
(P.56, P.59, P.65)
DC-IN Jack(P.86)
Card Cover (P.5)
Card Slot (P.5)
Self-Timer Lamp/AF Illuminator
(P.28, P.38, P.42)
8/8/2019 Olympus Cam Manual
12/89
12 EN
Zoom Ring(P.21)
Hot Shoe(P.82)
Mode Dial(P.6, P.16)
Control Dial(P.22)
Power Switch(P.6, P.16)
Tripod Socket
Speaker
Battery CompartmentCover (P.4)
Battery CompartmentLock (P.4)
Monitor(P.13, P.54)
DISP./E Button(P.26)
m Button(P.25)
f/S Button
(Shadow AdjustmentTechnology/Erase)(P.25)
Arrow Pad (P.27)
o Button(OK/FUNC)(P.28)
u Button (Monitor/Viewfinder)
(P.22)AELAFL/m Button(AE Lock, AF Lock/SequentialPlayback) (P.23)
q/P Button(Playback/Print)(P.25, P.61)
Viewfinder (P.9)
Diopter Adjustment Dial
(P.9)z Button (Custom)(P.27)
# Button (Flash)(P.23)
Y Button(Self-timer) (P.28)
& Button (Macro)(P.27)
Card Access Lamp(P.9, P.67, P.73)
8/8/2019 Olympus Cam Manual
13/89
EN 13
(Shooting modeMonitor Symbols & Icons
Item Indication Ref. Page
1 Shooting mode P,c,B,F,U,A, etc. P.6, P.16,P.37
2 Flash mode !,#,H,$, etc. P.23
3 Silent mode j P.45
4 Digital image stabilization h P.42
5 Macro modeSuper macro mode
&%
P.27
6 Shadow Adjustment Technology f P.25
7 Noise reduction T P.44
8 AE lock mark B P.23
9 Battery check Z = full power, [ = low power P.76
10 AF lock markManual focusAF predict
^a{
P.23P.24P.42
11 Flash standbyCamera movement warning/Flash
charge
# Lit# Blinks
P.68
12 Flash intensity control w -2.0 - +2.0 P.42
13 Saturation 6 -5 - +5 P.44
14 Sharpness N -5 - +5 P.44
15 Contrast J -5 - +5 P.44
16 Conversion lens 1 P.45
17 Sound record R P.50
18 Dual time l P.55
19 Alarm k P.55
20 Number of storable still picturesRemaining recording time
400:34
P.8P.72
MovieStill picture
10M10M+2.0+2.0 1/4001/400 F3.5F3.5
+2.0+2.0+2+2+2+2+2+2
44IN
ISO1600ISO1600
AFL
NR A EL
+2.0+2.0
12s12sF IN EFIN E
C
1
1011
121314
1516
1718
1920
212425 2326
3233
31
30
29
28
27
2 54 96 7 83
22
+2.0+2.0 IN 00:3400:34VG AVGA1515
12s12s
1
17
18
20
19
22
212326
3331
29
28
27
2 54 93
8/8/2019 Olympus Cam Manual
14/89
14 EN
21 Current memory B: Pictures are recorded to the internalmemory
No indication: Pictures are recorded to thecard
P.85
22 AF target mark R P.9,P.21,P.41
23 Self-timer Y,W P.28
24 Aperture value F2.8 to F8.0 P.17
25 Shutter speed 15", 1/2, 1/400, 1/2000, BULB, etc. P.17
26 Exposure compensation -2.0 - +2.0 P.22
27 Image qualityCompression
Frame rate
P,QM (Normal),L (Fine)O (15 frames/sec.),N (30 frames/sec.)
P.34P.34
P.35
28 Image size F,H,D,C, etc. P.34
29 Spot metering n,J P.4130 ISO ISO 100, ISO 800, ISO 1600 etc. P.40
31 White balance 5,3,1,w -y,V P.39
32 Drive j,c,d,g,i, 7 P.24, P.40
33 White balance compensation B1 - B7, R1 - R7 P.43
Item Indication Ref. Page
8/8/2019 Olympus Cam Manual
15/89
EN 15
(Playback mode
Item Indication Ref. Page
1 Silent mode j P.452 Print reservation/Number of prints
8/8/2019 Olympus Cam Manual
16/89
16 EN
Button
operations
Button operations
Set the mode dial to the desired shooting or playback mode. Some functions cannot be set depending on the position of the mode dial.
g Functions available in shooting modes (P.79)
The camera determines the optimum settings for the shooting conditions automatically.Settings in the [CAMERA MENU] such as WB and ISO sensitivity cannot be changed.
The camera automatically sets the optimum aperture value and shutter speed for the brightness ofthe subject.Settings in the [CAMERA MENU] such as WB and ISO sensitivity can be changed.
1 Power switch Turning the camera on and off
Power on: Shooting mode Monitor turns on Lens extends
Playback mode Monitor turns on
2 Mode dial Switching between shooting and playback modes
h Shooting pictures with full automatic settings
P Set the optimum aperture value and shutter speed
Playbackmode
Shooting mode
Shooting mode
Flash mode
Drive mode
Macro mode/Super macro mode
10M10M
P
44INORMNORM 1/4001/400 F3.5F3.512s12sSelf-timer
c
d
e
f g
7 8
12 5
364
9
a
b
The number of
remaining still pictures isdisplayed.
h 0
j
i
k
8/8/2019 Olympus Cam Manual
17/89
EN 17
Buttonoperations
Turn the control dial. Press F to switch between the aperture value and the shutter speed.
To take long exposure (bulb) shotsTurn the control dial toward G to set the shutter speed to BULB. The shutter remains open as long
as the shutter button is pressed. (Bulb shooting is only possible when [ISO] is set to [64] (maximumtime: 8 minutes).)
A Changing the aperture value for shooting picturesTurn the control dial. The camera automatically sets the shutterspeed.
Aperture value
: Turning toward U increases the aperture value.
: Turning toward G decreases the aperture value.
When the correct exposure cannot be obtained, the aperture valueis displayed in red.
S Changing the shutter speed for shooting picturesTurn the control dial. The camera automatically sets the aperturevalue.
Shutter speed: Turning toward U sets the shutter speed faster.
: Turning toward G sets the shutter speed slower.
When the correct exposure cannot be obtained, the shutter speedis displayed in red.
M Changing the aperture value and shutter speed for shooting picturesExposure differentialWhen this range has been exceeded 3.0EV, the exposuredifferential is displayed in red.
Aperture value
: Turning toward U increases the aperture value.
: Turning toward G decreases the aperture value.
Shutter speed
: Turning toward U sets the shutter speed faster.
: Turning toward G sets the shutter speed slower.
1/10001/1000 F4.0F4.0
A
10M10M44INORMNORM
Adjustment rangeW : F2.8 to F8.0T : F4.5 to F8.0
1/1001/100 F2.8F2.8
S
10M10M44INORMNORM
Adjustment range1/2 to 1/1000(When [NOISE REDUCT.] is setto [ON]: up to 4 sec.)
1/10001/1000 F2.8F2.82.0+2.0
M
10M10M44INORMNORM
Adjustment range
Aperture value: F2.8 to F8.0(The aperture value variesdepending on the zoom position.)Shutter speed: 15" to 1/2000 (Theshutter speed varies depending
on the aperture value.)
8/8/2019 Olympus Cam Manual
18/89
Button
operations
18 EN
This mode allows you to set the shooting functions, save up to 4 shooting modes manually, and usethem as your original shooting modes.g MY MODE SETUP Setting and saving shooting-related functions (P.57)
Use the function menu or control panel to switch the registered My Mode.g My 1/2/3/4 Switching the registered original shooting mode (P.28)
Switching My Mode (P.31)
You can shoot pictures by selecting a scene mode according to the situation.
Select a scene mode/Change to another scene mode Press m and select [SCN] from the top menu. By switching to another scene mode, most settings will be changed to the default settings of the
new scene mode.g s (Scene) Shooting pictures by selecting a scene according to the situation (P.37)
Shooting pictures by comparing previews of different effects
When [R] (movies) is set to [ON], audio is recorded with the movie. When recording with sound, only the digital zoom can be used. To use the optical zoom, set [R]
(movies) to [OFF]. To zoom in when recording with sound, set [DIGITAL ZOOM] to [ON].g R (movies) Recording sound with movies (P.45)
DIGITAL ZOOM Zooming in on your subject (P.41)
r Shooting pictures with your own original modes
s Shoot pictures by selecting a scene mode according to the situation
g Follow the shooting guide to take better picturesThis function allows you to set the target items by following theshooting guide displayed on the screen. Press m to display the shooting guide again. To change the setting without using the shooting guide, select
another shooting mode. Functions set using the shooting guide will revert to the default
settings when m is pressed or when the shooting mode ischanged.
Select one of the [1 Shoot w/ effects preview.] options from the
[SHOOTING GUIDE] menu to preview a live, multi-frame windowon the monitor showing different levels of the selected shootingeffect. You can use the four preview frames to compare the desiredsettings/effects. Use the arrow pad to select the frame with the desired settings,
and press o. The camera automatically switches to shootingmode and allows you to shoot with the selected effect.
n Recording movies
1
2
3
4
5
OKSET
SHOOTING GUIDE
Shoot w/ effects preview.
Brightening subject.
Shooting into backlight.
Set particular lighting.
Blurring background.
Use 4 3 to change the display.
When [Exposure effects.] isselected
0.00.0 +0.3+0.3
+0.7+0.7 +1.0+1.0
Exposure effects.
8/8/2019 Olympus Cam Manual
19/89
EN 19
Buttonoperations
When [IMAGE STABILIZER] is set to [ON], continuous movie recording for a long period willcause the cameras internal temperature to rise and the camera may stop operationautomatically. Remove the battery and allow the camera to cool down for some time before youbegin shooting again. Or you can set [IMAGE STABILIZER] to [OFF].In addition, the temperature of the cameras exterior also rises during usage. This is not amalfunction.
The last picture taken is displayed. Press the arrow pad to view other pictures.
Use the control dial to switch between close-up playback, index display and calendar display.g Control dial Index display/Calendar display/Close-up playback (P.22)
Playing back moviesSelect a movie in the playback mode and press o to play.
Operations during movie playback
Press o to pause the playback.
This icon lights red during movie recording.
The remaining recording time is displayed.When the remaining recording time reaches 0, recording will stopautomatically.
q Viewing pictures you have taken/Selecting playback mode
00:3400:34
RECREC
2008.08.262008.08.26 12:3012:30100-0004100-0004
44INMOVIE PLAY OK
2008.08.262008.08.26 12:3012:30100-0004100-0004
00:12 /00:3400:12 /00:34IN1 : Increases the volume.2 : Reduces the volume.
3 : Each time you press the button, the playback speed changes in the followingorder: 2; 20; and back to 1.
4 : Plays the movie in reverse. Each time you press the button, the playback speedchanges in the following order: 1; 2; 20; and back to 1.
Playing time/Total recording time
8/8/2019 Olympus Cam Manual
20/89
Button
operations
20 EN
Operations during pause
To resume the movie, press o. To cancel the playback of the movie in the middle of it or during pause, press m.
Viewing panoramic pictures taken with [COMBINE IN CAMERA 1] [COMBINE INCAMERA 2] (Panorama playback)
Use the arrow pad to select a panoramic picture, and then presso. Scrolling from left to right or from bottom to top starts
automatically. Turn the control dial to zoom in or out while a picture is scrolling.
Use the arrow pad to change the scrolling direction of a zoomedin picture.
To stop or resume scrolling in the original magnification, presso.
To exit panorama playback, press m.g PANORAMA Taking and combining panoramic pictures
(P.36)
Displaying pictures that have been shot continuously in index view (SequentialPlayback) / Auto playing back of pictures that have been shot continuously
(Sequential Pictures Auto Playback)Only the first frame will be displayed for pictures that have been shot continuously using thefollowing options.
[j] [c] [d] [i] [BKT] [TIMELAPSE] [AUCTION] [SHOOT & SELECT1] [SHOOT &SELECT2] [SMILE SHOT]
Select the pictures withs icon and press AELAFL/m to play back in index view (SequentialPlayback). Press AELAFL/m again to return to the first frame.
Select the pictures withs icon and press o to play back automatically (Sequential PicturesAuto Playback).
This function is only available for pictures taken with this model. When the first frame is displayed, changes to any of the following functions will be applied to all
the sequential pictures in the series:0/y/PRINT ORDER/ERASE
To configure settings to individual pictures, press AELAFL/m to display the pictures in indexview first before configuring.
2008.08.262008.08.26 12:3012:30100-0004100-0004
00:14 /00:3400:14 /00:34IN/
1 : Displays the first frame.2 : Displays the last frame.
3 : Displays the next frame.4 : Displays the previous frame.
22INEXPAND100-0002100-0002
10M10M
22INBACK
AELAFL/m
8/8/2019 Olympus Cam Manual
21/89
EN 21
Buttonoperations
Shooting still picturesSet the mode dial toh, P, A, S, M,r, g ors, and lightly press the shutter button(halfway). The AF target mark lights in green when the focus and exposure are locked (focus lock).The shutter speed and aperture value are displayed (only when the mode dial is set toh, P, A,S orM). Now press the shutter button all the way (completely) to shoot a picture.
Recording moviesSet the mode dial ton, and press the shutter button halfway to lock the focus, and then press theshutter button completely to start recording. Press the shutter button again to stop recording.
Turn the zoom ring to zoom in on your subject when shooting.Optical zoom ratio: 20
Note When the camera is mounted on a tripod, if the tripod pad is too big, it may obstruct rotation
of the zoom ring.
3 Shutter button Shooting pictures
Locking the focus and then composing the shot(Focus lock)Compose your picture with the focus locked, and then fully pressthe shutter button to shoot a picture. If the AF target mark blinks in red, the focus is not adjusted
properly. Try locking the focus again.
4 Zoom ring Zooming while shooting
1/4001/400 F3.5F3.5
P
AF target mark
Zoom outZoom in
WW TT0M10M
P
44INORMNORM 1/4001/400 F3.5F3.5WW TT0M10M
P
44INORMNORM 1/4001/400 F3.5F3.5
8/8/2019 Olympus Cam Manual
22/89
Button
operations
22 EN
Turn the control dial toward G orU to change the picture display in playback mode.
Toggles between the monitor and viewfinder.
5 Control dial Index display/Calendar display/Close-up playback
6 F button Changing picture brightness (Exposure Compensation)Press F in shooting mode and turn the control dial to adjust thebrightness. Press F again to confirm your selection. Adjustable from - 2.0EV to +2.0 EV
: Turn the control dial toward U to make the picturebrighter.
: Turn the control dial toward G to make the picturedarker.
7 u button Monitor/Viewfinder
Close-up playback Turn the control dial toward U to
incrementally enlarge the pictureup to 10 times the original size.Turn the control dial toward G toreduce the size.
Use the arrow pad during close-up playback to scroll around the
picture. Press o to return to the single-
frame playback.
Index display Use the arrow pad to select a
picture for playback, and presso to play back the single-frame of the picture selected.
Calendar display Use the arrow pad to select the date,
and press o or turn the control dialtoward U to display the pictures onthe date selected.
Single-frame playback Use the arrow pad to browse pictures.
0808 2727 2828 2929 3030 3131 11 22SUNSUN MONMON TUETUE WEDWED THUTHU FRIFRI SATSAT20082008
33 44 55 66 77 88 991010 1111 1212 1313 1414 1515 16161717 1818 1919 2020 2121 2222 23232424 2525 2626 2727 2828 2929 30303131 11 22 33 44 IN
2008.08.262008.08.26 44IN2:3012:30
44IN10M10M
2008.08.262008.08.26 12:3012:30100-0004100-0004NORMNORM
2008.08.262008.08.26 12:3012:30
1010x
44IN
2008.08.262008.08.26 12:3012:30 44IN
2008.08.262008.08.26 12:3012:30 44IN
GUG
GU
G
GU
GU
U
1/10001/1000 F8.0F8.02.0+2.0
P
10M10M44INORMNORM
8/8/2019 Olympus Cam Manual
23/89
EN 23
Buttonoperations
Assign [AE LOCK], [AF LOCK] or [AF LOCK + AE LOCK] to AELAFL so that the functionconcerned is enabled by pressing AELAFL in shooting mode.
g AEL/AFL BUTTON Registering the AE lock and AF lock functions (P.57)
Only the first frame is displayed for pictures that have been shot continuously.Pressm in the playback mode to display continuously shot pictures in index view.g Displaying pictures that have been shot continuously in index view (Sequential Playback) /
Auto playing back of pictures that have been shot continuously (Sequential Pictures AutoPlayback) (P.20)
Opens the flash.Press#UP to take a picture with flash.
Press#UP in shooting mode to open the flash. Then press 3# to select the flash setting.Press o to confirm your selection.
8 AELAFL/m buttonLocking the focus position and exposure/Playing back continuously shot pictures in index display
AELAFL Locking the focus position and exposure
Locking the focus position and exposure (AF lock +AE lock)
Assign [AF LOCK + AE LOCK] to AELAFL. The meteringvalue is saved by pressing AELAFL and the focus andexposure are locked.^ (AF lock mark) and B (AE lockmark) are displayed on the monitor. Press AELAFL again tocancel the AF lock + AE lock. Each time you press the button,the focus and exposure are locked and canceled alternately.
m Playing back continuously shot pictures in index display
9 #UP button Flash pop-up
0 3# button Flash shootingAUTO Auto-flash The flash fires automatically in low light or backlight
conditions.
! Red-eye reductionflash
This emits pre-flashes to reduce the occurrence of red-eye inyour pictures.
# Fill-in flash The flash fires regardless of the available light.H Red-eye fill-in flash The flash always fires after pre-flashes for red-eye reduction
are emitted.
$ Flash off The flash does not fire.
#SLOW Slowsynchronization
The flash fires with slow shutter speed. The flash fires rightafter the shutter fully opens (1st curtain). As the flash fireswith slow shutter speed, you can capture both thebackground, such as a night view, and the subject.
!SLOW Slowsynchronization/
Red-eye reductionflash
While using slow synchronization (1st curtain) with flashshooting, you can also use this function to achieve red-eye
reduction. Use this mode to take pictures of a person againsta night view.
1/4001/400 F3.5F3.5
PAFL
AEL
AF lock mark
AE lock mark
8/8/2019 Olympus Cam Manual
24/89
Button
operations
24 EN
Flash options are disabled if the pop-up flash is closed.
Press j in shooting mode to select the drive mode.Press o to confirm your selection.
You can take a sequence of pictures at one time by holding down the shutter button. The camerawill take pictures continuously until you release the shutter button.
The exposure differential and number of frames for bracket shooting can be set in [DRIVE] in the[CAMERA MENU].g DRIVE Continuous shooting (P.40)
Slide the AF/MF switch in shooting mode to set the focus mode.
#SLOW2 Slowsynchronization 2
The flash fires just before the shutter closes (2nd curtain).You can use this setting to create interesting effects in yourpicture, such as expressing the movement of a car byshowing the tail-lights streaming backwards. The slower theshutter speed, the more pronounced the effects.
a j button Single-frame shooting/Sequential shootingo Single-frame shooting Shoots 1 frame at a time when the shutter button is pressed.
j Sequential shooting Focus and exposure are locked at the first frame. Thesequential shooting speed varies depending on the imagequality setting.
c High speed sequentialshooting 1
Pictures can be taken at a faster speed than normal sequentialshooting.
d High speed sequential
shooting 2
Sequential shooting at a speed of approximately 13.5 frames/
sec.g Pre-capture Sequential shooting at a speed of approximately 13.5 frames/
sec. Pressing the shutter button halfway stores 10 frames of apicture immediately before shooting.
i AF sequential shooting Adjusts the focus 1 frame at a time. The shooting speed isslower than for normal sequential shooting.
7 Bracket shooting Takes pictures sequentially while changing the exposure foreach frame. Focus and white balance are locked at the firstframe.
b AF/MF switch Changing the focus method
AF Press the shutter button halfway. The camera automaticallyfocuses.
MF Adjust the focus manually.
When set to [MF] Press 4 3 to set the focus. During operation, the center of the
frame is enlarged. Hold down o to fix the focus. The focus is locked at the
distance you have set, and MF is displayed in red on themonitor. To adjust the focus, hold down o again.
The distance displayed on the monitor is a reference figure. You can use the zoom ring or the control dial as well as 4 3 to
adjust the focus.g MANUAL FOCUS Selecting the focusing method in manual
focus mode (P.58)
1m1m 3m3m 5m5m
10M10M
P
1/4001/400 F3.5F3.5 44
MF
ININ EFIN E
8/8/2019 Olympus Cam Manual
25/89
EN 25
Buttonoperations
Pictures you have taken are displayed on the monitor. Pressq in shooting mode.Pressq again or press the shutter button halfway to return to shooting mode.
When a printer is connected to the camera, display the picture you want to print in playback modeand press P.g EASY PRINT (P.59)
Pressf in shooting mode to turn on or off Shadow Adjustment Technology. Press o to confirm
your selection. A frame is displayed on the monitor around your subjects face (except forn). Thisfunction makes the subjects face appear brighter, even against strong backlighting.
It may take a few seconds until the frame is displayed on the monitor. The faces may not be detected depending on the subject. When [ON] is selected, the following setting restrictions apply:
[METERING] is fixed at [ESP]. [AF MODE] is fixed at [FACE DETECT]. When [DRIVE] is set to any mode other than [o], this function is only applied to the first
frame.
[i] automatically becomes [j].
In playback mode, select the picture you want to erase and pressS. Once erased, pictures cannot be restored. Check each picture before erasing to avoid
accidentally erasing pictures you want to keep.g 0Protecting pictures (P.50)
Displays the top menu.
c q/P button Viewing pictures/Printing picturesq Viewing pictures
P Printing picturesd f/S button Brightening the subject against backlight/Erasing picturesf Brightening the subject against backlight (Shadow Adjustment
Technology)
OFF Shadow Adjustment Technology is deactivated.
ON Shadow Adjustment Technology is activated.
S Erasing pictures
e m button (MENU)
8/8/2019 Olympus Cam Manual
26/89
Button
operations
26 EN
Press DISP. to change the display in the following order.
*1 This is not displayed when the mode dial is set ton org.*2 This is not displayed when the mode is set to [OFF] in the menu.g uDisplaying the histogram (P.57)
FRAME ASSIST Displaying the frame assist/Determining the type of frame assist (P.56)
f DISP./E buttonChanging the information on display/Displaying the menu guide/Checking the time
DISP. Changing the information on display
Frame assist(Horizontal andvertical lines ordiagonal lines)*1*2
Simple display*1
Normal display
Histogramdisplay*1*2
Shooting mode
Histogramdisplay*1
Normal display
Detailed
display
Playback mode
No informationdisplay
2008.08.262008.08.26 12:3012:30 44100-0004100-0004
IN
10M10MNORMNORM
10M10M
2008.08.262008.08.26 12:3012:30 44100-0004100-0004
+2.0+2.0F3.5F3.5/10001/1000
IN
ISO 40 0ISO 400NORMNORM
10M10M+2.0+2.0
P
44INORMNORM
ISO1600ISO1600
12s12s1/4001/400 F3.5F3.5
10M10M+2.0+2.0
P
44IN
ISO1600ISO1600
NORMNORM12s12s
1/4001/400 F3.5F3.5
12s12s
10M10M+2.0+2.0
P
44INORMNORM
ISO1600ISO1600
1/4001/400 F3.5F3.5
12s12s
10M10M
2008.08.262008.08.26 12:3012:30
+2.0+2.0F3.5F3.5
44IN
NORMNORM
1/10001/1000
ISO 40 0ISO 400
8/8/2019 Olympus Cam Manual
27/89
EN 27
Buttonoperations
While the camera is off, press DISP./E to display the set alarm time (when [ALARM CLOCK] isset) and the current time for 3 seconds.
Use the arrow pad to select scenes, playback picture, and the items on the menus.
Press 4& in shooting mode to select the macro mode.Press o to confirm your selection.
This allows you to register a frequently used function (excepth,n and g) to 1 z.Once registered, you can set the settings directly with the button instead of displaying the screen
from the menu. The default setting is [OFF].
(Example) When [FINE ZOOM] is registered in [CUSTOM BUTTON]
Press 1 zn
g CUSTOM BUTTON Assigning functions to the custom button (P.58)Functions that can be assigned to My Mode/custom button (P.78)
E Displaying the menu guideWith a menu item highlighted, press and hold downE to display themenu guide.
Checking the time
g Arrow pad (1243)h 4& button Shooting pictures close to the subject (Macro mode)
OFF Macro mode off Macro mode is deactivated.
& Macro mode This mode lets you shoot as close as 10 cm/3.9 in. (wide)from your subject.
% Super macro mode This mode lets you shoot as close as 1 cm/0.4 in. fromyour subject.
i 1z button Using this button as custom button
METERING
Sets picture brightness
for taking pictures.
OFF ONON
OKETSET OK
P
FINE ZOOMFINE ZOOM
A setting screen is displayed.
8/8/2019 Olympus Cam Manual
28/89
Button
operations
28 EN
Press 2Y in shooting mode to select on or off for the self-timer.Press o to confirm your selection.
To cancel the self-timer, press 2Y. Self-timer shooting is automatically canceled after one shot. The self-timer cannot be used when [AF PREDICT] is [ON] or [PRE-CAPTURE] is [ON].
Press o in shooting mode to display the control panel or function menu. You can use the controlpanel to view the current settings and set the shooting mode functions. You can use the functionmenu to set frequently used functions in shooting mode.This button is also used to confirm your selection. You can select whether to display the control panel or the function menu.g CONTROL PANEL Switching between the control panel and function menu (P.53)
g Operations using the control panel (P.29)
Displayed when the mode dial is set tor. Settings are registered ons as a factory default.
Other functions you can set with the function menug WB Adjusting the color of a picture (P.39)
ISO Changing the ISO sensitivity (P.40)
METERING Changing the area for measuring the brightness of a subject (P.41)IMAGE QUALITY Changing the image quality (P.34)
j 2Y button Self-timer shootingOFF Cancel the self-timer.
12s After pressing the shutter button completely, the self-timer lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.2s After pressing the shutter button completely, the self-timer
lamp blinks for approximately 2 seconds, and then the pictureis taken.
k o button (OK/FUNC) Setting using the control panel or function menu
Setting using the control panel
Setting using the function menu
My 1/2/3/4 .................................................... Switching the registered original shooting mode
s/E/c/d
Function menu
4 3 : Select a setting and press o.
12 : Select the function to be set.
c
10M10M MY MODE 2MY MODE 2
33ISO1600ISO1600
F IN EFIN E
8/8/2019 Olympus Cam Manual
29/89
EN 29
Operation
susingthecontrolpane
l
Operations using the control panel
Pressing o in shooting mode displays a screen for settingand displaying shooting functions. This is called the controlpanel.
u button
o button
Viewfinder Monitor Viewfinder Monitor
10M10M
P
44INORMNORM 1/4001/400 F3.5F3.5
ISO1600ISO160010M
1/400 F3.5
+0
+0
+0
44
ISO1600
+0.0
P
WBWBK0M10M
P
44INORMNORM 1/4001/400 F3.5F3.5
ISO1600ISO1600o button
10M
1/400 F3.5
+0
+0+0
44
ISO
1600
+0.0
P
2008.08.262008.08.26
u buttonControl panel
Whenu is pressed to turn the viewfinder on,the control panel is displayed on the monitor.
10M10M
P
44INORMNORM 1/4001/400 F3.5F3.5
ISO1600ISO1600
8/8/2019 Olympus Cam Manual
30/89
Operationsusingtheco
ntrolpanel
30 EN
1 Displays the function settings status. When 4&, 1 z, 2Y orf is pressed, the corresponding icon is selected and you can
set the function.
g Setting using the buttons (P.31)2 The battery check and flash charging marks are displayed.3 The name of the function selected in area 4 is displayed. The name of the function is also
displayed during custom button operations. When no function has been selected, the date isdisplayed.
4 You can set the following functions. Use the arrow pad to select a function and use the control dial to change the settings.g Using the control panel (P.31)
5 The shutter speed, aperture value, exposure compensation value, exposure compensationindicator and flash intensity control indicator are displayed.
6 The number of storable still pictures/remaining recording time is displayed.
Control panel indications
Function Ref. Page Function Ref. Page
WB P.39 IMAGE QUALITY P.34
FLASH MODE P.23 IMAGE SIZE P.34w P.42 COMPRESSION P.34
ISO P.40 PICTURE MODE P.43
DRIVE P.40 SHARPNESS P.44
AF MODE P.41 CONTRAST P.44
AREA P.42 SATURATION P.44
METERING P.41
12
3
4
10M
+2.0 1/1000
0
F8.0
+2
+2
+2
44
ISO1600
NR
+2.0
FIN E
P
WBWB
RC2s2s
3
5 6
8/8/2019 Olympus Cam Manual
31/89
EN 31
Operation
susingthecontrolpane
l
Using the control panel
(Example) To set [w]1 Press o to display the control panel on the monitor. The
cursor lights in the function area.2 Use the arrow pad to select [w] and then use the control dial
to change the settings.
Items which cannot be selected are displayed in gray. Items which cannot be set are indicated by [].
Setting using the buttons
When 4&, 1 z, 2Y orf is pressed, the correspondingicon on the control panel is selected. While its icon is selected,you can use the control dial to set the functions value.
Switching My Mode
You can use this function when the mode dial is set tor. Usethe arrow pad to selectr and use the control dial to switch MyMode.g MY MODE SETUP Setting and saving shooting-related
functions (P.57)
10M
+2.0 1/400 F3.5
+0
+0+0
44
ISO
1600
+2.0
P
wwK
FIN E
The flash intensity value and flashintensity control indicator are
displayed.
10M
1/400 F3.5
+0
+0
+0
44
ISO1600
+0.0
P
2008.08.262008.08.26K
When 4& is pressed
10M
1/400 F3.5
+0
+0
+0
44
ISO1600
+0.0
FIN E
r1/2/3/4r1/2/3/4c
K
Select this icon.
8/8/2019 Olympus Cam Manual
32/89
32 EN
Menuoperation
s
Menu operations
Pressing m displays the top menu on the monitor or viewfinder.
The items displayed on the top menu differ according to the mode.
When [CAMERA MENU], [PLAYBACK MENU], [EDIT], [ERASE] or [SETUP] is selected, themenu corresponding to the respective functions is displayed.
When your camera is set according to the shooting guide with the mode dial set at g,press m to display the shooting guide screen.
During menu operations, the buttons and their respective functions are displayed at the bottom ofthe monitor. Follow these guides to navigate the menus.
About the menus
Operation guide
BACKa : Returns to the previous menu.EXITa : Exits the menu.
SETf : Sets the selected item.
Mode dial
m button
Arrow pad
o button
Top menu (When Mode Dial is set to P)
S C NS C N
RESETRESET
PANORAMAPANORAMA
CAMERAMENUCAMERAMENUSILENTMODESILENTMODE
MENUEXIT SET OK
IMAGEQUALITYIMAGEQUALITY
SETUPSETUPISO
OFF
OFF
1
2
3
4
5
CAMERA MENU
SET OK
AUTO
o
FINE ZOOM
DIGITAL ZOOM
DRIVE
AUTOWB
MENUEXIT
Operation guide
m button o
S C NS CN
RESETRESET
PANORAMAPANORAMA
CAMERAMENUCAMERAMENUSILENTMODESILENTMODE
MENUEXIT SET OK
IMAGEQUALITYIMAGEQUALITY
SETUPSETUP
8/8/2019 Olympus Cam Manual
33/89
EN 33
Menuoperations
This explains how to use the menus with [DIGITAL ZOOM] as an example.
1 Set the mode dial to P.2 Pressm to display the top menu.
Select [CAMERA MENU] and presso. [DIGITAL ZOOM] is on a menu in [CAMERA MENU]. Press
o.
3 Press12 to select [DIGITAL ZOOM], andpresso. Unavailable settings cannot be selected. When pressing 4 on this screen, the cursor moves to the
page display. Pressing 12 changes the page. To return
to item selection, press 3 oro.
4 Press12 to select [OFF] or [ON], andpresso. The menu item is set and the previous menu is displayed.
Press m repeatedly to exit the menu. To cancel changes and continue menu operation, press
m before pressing o.
Using the menus
S C NS CN
RESETRESET
PANORAMAPANORAMA
CAMERAMENUCAMERAMENUSILENTMODESILENTMODE
MENUEXIT SET OK
IMAGEQUALITYIMAGEQUALITY
SETUPSETUP
ISO
OFF
OFF
1
2
3
4
5
CAMERA MENU
SET OK
AUTO
o
FINE ZOOM
DIGITAL ZOOM
DRIVE
AUTOWB
MENUEXIT
The selected item is displayedin a different color.
Page display:The page display mark is displayed when there
are additional menu items on the next page.
1
2
3
4
5
ISO
OFF
OFF
CAMERA MENU
AUTO
o
FINE ZOOM
DIGITAL ZOOM
DRIVE
AUTOWB
MENUEXIT SET OK
1
2
3
4
5
ISO
OFF
OFF
CAMERA MENU
AUTO
o
FINE ZOOM
DIGITAL ZOOM
DRIVE
AUTOWB
MENU SET OKBACK
DIGITAL ZOOM
OFF
ON
8/8/2019 Olympus Cam Manual
34/89
34 EN
Menuoperation
s
Some menu items are not available depending on the position of the mode dial.g Functions available in shooting modes (P.79)
g SETUP menus (P.52) The factory default settings are displayed in gray ( ).
This function allows you to set [IMAGE QUALITY] (still pictures only) and [IMAGE SIZE] and[COMPRESSION] ([FRAME RATE] when recording movies). When [RAW] is selected in [IMAGE QUALITY], you cannot set [IMAGE SIZE] or
[COMPRESSION].
Still picture image quality and their applications
* Cannot be selected when set toh ors.
Shooting mode menu hPASMrsn5CAMERA MENU
WBISODRIVEFINE ZOOM
DIGITAL ZOOMMETERINGAF MODEFULLTIME AFAF PREDICTAF ILLUMINAT.
IMAGE STABILIZERw
QFLASHR (still pictures)>PICTURE MODE
SHARPNESSCONTRASTSATURATIONNOISE REDUCT.TIMELAPSE1 (conversion lens)R (movies)
* An OLYMPUS xD-Picture Card is required.
1 IMAGE QUALITY Changing the image quality
IMAGE QUALITY
JPEG Compressed still picture data in JPEG format. [IMAGE SIZE] and[COMPRESSION] can be set.
RAW* 3648 2736 Raw uncompressed data. Data is in ORF format.
RAW + JPEG* Images are simultaneously recorded in JPEG and RAW formats at thetime of shooting.
IMAGE SIZE Application
F 3648 2736 Suitable for printing pictures over A3 (11 17 in.).
H 2560 1920 Suitable for printing pictures at A4 (8.5 11 in.).I 2048 1536 Suitable for printing pictures up to A4 (8.5 11 in.).
J 1600 1200 Suitable for printing pictures at A5 (5 7 in.).
K 1280 960 Suitable for printing pictures at postcard size.
C 0640 480 Suitable for viewing pictures on a TV or using pictures on emails andweb sites.
D 1920 1080 Suitable for playing pictures on wide screen TV.
COMPRESSION
LFINE Shooting at high quality.
M NORMAL Shooting at normal quality.
S C NS CN
RESETRESET
PANORAMAPANORAMA
CAMERAMENUCAMERAMENUSILENTMODESILENTMODE
MENUEXIT SET OK
IMAGEQUALITYIMAGEQUALITY
SETUPSETUP
1
2
3*
4
5
6
8/8/2019 Olympus Cam Manual
35/89
EN 35
Menuoperations
Movie image quality
g Number of storable still pictures and recording length of movies (P.72)
This function restores some shooting functions back to default settings.
Functions restored to the factory default settings
IMAGE SIZE FRAME RATE
C 640 480 N 30 frames/sec.
E 320 240 O 15 frames/sec.
2 RESET Change the shooting functions back to default settings
NO / YES
FunctionFactory default
settingRef.Page
FunctionFactory default
settingRef.Page
Flash AUTO P.23 FULLTIME AF OFF P.42
& OFF P.27 AF PREDICT OFF P.42
Y OFF P.28 AF ILLUMINAT. ON P.42Shadow AdjustmentTechnology
OFF P.25 IMAGE STABILIZER ON P.42
w 0.0 P.42
F 0.0 P.22 QFLASH INT/EXT P.43
IMAGE QUALITY JPEG P.34 R (still pictures) OFF P.43
IMAGE SIZE(still pictures/movies)
F/E P.34 > 0 P.43
PICTURE MODE NATURAL P.43
COMPRESSION M P.34 SHARPNESS 0 P.44
FRAME RATE O P.35 CONTRAST 0 P.44
WB AUTO P.39 SATURATION 0 P.44
ISO AUTO P.40 NOISE REDUCT. ON P.44
DRIVE o P.40 TIMELAPSE OFF P.45
FINE ZOOM OFF P.41 1 (conversion lens) OFF P.45
DIGITAL ZOOM OFF P.41 R (movies) OFF P.45
METERING ESP P.41 Monitor/Viewfinder (u) Monitor P.22
AF MODE iESP P.41 s PORTRAIT P.37
8/8/2019 Olympus Cam Manual
36/89
36 EN
Menuoperation
s
An Olympus xD-Picture Card is required for shooting. When the card capacity is insufficient, this function cannot be selected.
[COMBINE IN CAMERA 1]As you recompose the frame, the camera automatically shoots and combines pictures for a singlepanoramic picture in the camera. Only combined pictures are saved.
Take the first picture. When you slightly move the camera in the direction of the next picture, a target mark and a
pointer appear. The pointer moves as you pan the camera. Move the camera slowly and steadily until the pointer
overlaps the target mark, then stay still. The camera shoots the second picture automatically. After the current subject appears on the monitor, take the third picture in the same manner as
the second one. After the third picture is taken, the pictures are automatically combined, and then the combinedpicture is displayed. To combine only two pictures, press o before shooting the third picture.
To cancel making the panoramic picture during shooting, press m.
[COMBINE IN CAMERA 2]Pictures are manually shot, and the camera automatically combines pictures for a single panoramicpicture in the camera. Only combined pictures are saved.
Use the arrow pad to specify at which edge you want to connect the pictures, and then take thefirst picture.
Compose your second shot so that the edge of the first picture overlaps the edge of the secondpicture, then shoot.
Take the third picture in the same manner as the second one. After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press o before shooting the third picture. To cancel making the panoramic picture during shooting, press m.
3 PANORAMA Taking and combining panoramic pictures
COMBINE IN CAMERA1 As you recompose the frame, the camera automaticallyshoots and combines pictures in the camera.
COMBINE IN CAMERA2 Pictures are manually shot, and the camera automaticallycombines pictures in the camera.
COMBINE IN PC Pictures are manually shot to be combined on a computer.
SAVE OKMENUCANCELMENUCANCEL SAVE OKMENUCANCEL SAVE OKMENUCANCEL
2nd 3rd
Target mark
PointerConnects picturesfrom left to right
1st
Connects picturesfrom left to right
SAVE OKMENUCANCELMENUCANCEL SAVE OKMENUCANCEL
1st 2nd 3rd
8/8/2019 Olympus Cam Manual
37/89
EN 37
Menuoperations
[COMBINE IN PC]Create a panoramic picture using the OLYMPUS Master software from the provided CD-ROM.
Use the arrow pad to specify at which edge you want to connect the pictures, and then composeyour shots so that the edges of the pictures overlap.Shooting is possible for up to 10 pictures. Press o to exit panorama shooting. In [COMBINE IN PC] the previous picture for positioning does not remain. Remember the frame
displayed on the monitor as a rough indication, then compose the shot so that the edges of theprevious picture in the frame overlap with the next shot.
Note Focus, exposure, WB and zoom are locked in the first frame, and the flash does not fire.
In [COMBINE IN CAMERA1] or [COMBINE IN CAMERA2] mode, image quality is locked. Optical zoom magnification is restricted to 10. In [COMBINE IN CAMERA1] mode, camera settings are automatically optimized for this
mode. In [COMBINE IN CAMERA2] or [COMBINE IN PC] mode, pictures are taken in thelast [ISO] or [SCN] settings set (except for some scene modes).
In panorama mode, Shadow Adjustment Technology is not available. Pictures taken in panorama mode cannot be edited, except for [LIGHTING FIX] in
[PERFECT FIX].
The scene mode selection screen displays sample images aswell as a description of the shooting situation for which theselected scene is designed. It can be set only when the mode dialis set to s.g Mode dial Switching between shooting and playback modes
(P.16) By switching to another scene mode, most settings will be
changed to the default settings of the new scene mode.The zoom position may change automatically depending onthe scene.
*1 When the subject is dark, noise reduction is automaticallyactivated. This approximately doubles the shooting time, duringwhich the next picture cannot be taken.
*2 The focus is locked at the first frame.*3 During sequential shooting, the camera focuses for each frame.
4 s (Scene) Shooting pictures by selecting a scene according to the situationPORTRAIT /LANDSCAPE/LANDSCAPE+PORTRAIT/SPORT/NIGHT SCENE*1/NIGHT+PORTRAIT*1/INDOOR/CANDLE/SELF PORTRAIT/
AVAILABLE LIGHT/SUNSET/FIREWORKS*1/MULTI FIREWORKS/CUISINE/
BEHIND GLASS/DOCUMENTS/AUCTION*2/SHOOT & SELECT1*2/
SHOOT & SELECT2*3/SMILE SHOT/BEACH/SNOW/QUICK SHUTTER
Connects pictures from left to right Connects pictures from bottom to top
3: The next picture isconnected at the rightedge.
4: The next picture is
connected at the leftedge.
1 : The next picture isconnected at the top.
2: The next picture isconnected at the
bottom.
Scene mode selection screen
Set the scene mode.
PORTRAIT
SET OKMENUEXIT
8/8/2019 Olympus Cam Manual
38/89
38 EN
Menuoperation
s
[bMULTI FIREWORKS] This function allows you to take multiple exposures of two images on a single frame. Take the first image. The first image is saved and then displayed in the background. Compose
the shot and take the second image. The second image is saved and the two images arecombined and saved as a separate file. The combined picture is displayed during saving, andthen the camera is again ready to take a second image. You can continue to take multipleexposure pictures.
The exposure is locked at the first image.
[eSHOOT & SELECT1] [fSHOOT & SELECT2] Press and hold the shutter button to shoot sequential pictures. After shooting pictures, select the
ones you want to erase by marking them withR and pressf/S to erase them.
[lSMILE SHOT] When the camera detects a smiling face in shooting standby mode, 3 frames are automatically
taken in high speed sequential shooting mode. You can also shoot a picture by pressing theshutter button.
A smiling face may not be detected for some subjects. When [SMILE SHOT] is selected, the self-timer lamp lights. Shooting is not available while the
self-timer lamp is blinking.
[rQUICK SHUTTER] The shutter release time lag is shorter than normal. This enables you not to miss a single photo
opportunity. [FULLTIME AF] is automatically set to [ON].g FULLTIME AF Shooting pictures while keeping the subject in focus (P.42) [c] and [d] in [DRIVE] can be set.
10M10M44INORMNORM
10M10M33INORM OKEXIT
When taking the first image When taking the second image
Press o to return to taking the firstimage.
OK SMENUBACK GO
Selected picture.
Press 4 3 to scroll through the pictures.
Pictures withR are erased.
Select the pictures to be erased.Press o to add or eraseR to a picture to be deleted.
8/8/2019 Olympus Cam Manual
39/89
EN 39
Menuoperations
When [PRESET] is selected
When [V] is selected
With the [ONE TOUCH WB] screen displayed, point the camera at a sheet of white paper.Position the paper so that it fills the screen, making sure there are no shadows.
Press o. The new white balance is set.
5 CAMERA MENU
WB .................................................................................... Adjusting the color of a picture
AUTO The white balance is adjusted automatically for naturalcolor, regardless of the light source.
PRESET Selects the white balance according to the lightsource.
5 Sunny day For shooting under a clear sky.
3 Cloudy day For shooting under a cloudy sky.
1 Tungsten light For shooting under tungsten lighting.
w Fluorescent lamp 1 For shooting under daylight fluorescent lighting. (Thistype of lamp is mainly used in homes.)
x Fluorescent lamp 2 For shooting under a neutral white fluorescent lamp.(This type of lamp is mainly used in desk lamps.)
y Fluorescent lamp 3 For shooting under a white fluorescent lamp. (Thistype of lamp is mainly used in offices.)
V One-touch WB For setting a more precise white balance than presetwhite balance can provide.You can set and save the optimum white balance forthe shooting conditions.
Press 12 to select a white balance setting, then press o.
MENU
PRESET WB
BACK SET OK
1
2
o
1/4001/400 F3.5F3.5
P
44INORMNORM10M10M
8/8/2019 Olympus Cam Manual
40/89
40 EN
Menuoperation
s
If set to [6400], [IMAGE SIZE] is limited to [H] and lower. If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [6400] cannot be set.
You can take a sequence of pictures at one time by holding down the shutter button. The camera
will take pictures continuously until you release the shutter button. Only [o] is available when [IMAGE QUALITY] is set to [RAW] or [RAW+JPEG]. When [c] or [d] is selected, other functions are restricted as follows.
The flash mode is fixed at [$]. When [c] is selected, [IMAGE SIZE] is limited to [H] and lower and the number of pictures
that can be taken continuously to approximately 30 or less (or approximately 20 or less when[H] and [L] are selected). When [d] is selected, [IMAGE SIZE] is limited to [I] andlower and the number of pictures that can be taken continuously to approximately 30 or less(including the 10 pictures when [PRE-CAPTURE] is set to [ON]).
[ISO] settings will be restricted.
ISO ....................................................................................... Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions of thesubject.
HIGH ISO AUTO This function has a higher sensitivity compared to [AUTO] andstabilizes the blur caused by a moving subject or camera movementwhen taking pictures.
64/100/200/400/800/1600/3200/6400
A low value reduces the sensitivity for daylight shooting of sharp, clearpictures. The higher the value, the greater the cameras light sensitivityand ability to shoot with a fast shutter speed and in low light conditions.However, high sensitivity introduces noise into the resulting picture,which may give it a grainy appearance.
DRIVE ............................................................................................ Continuous shooting
o Shoots 1 frame at a time when the shutter button is pressed.
j Focus and exposure are locked at the first frame. The sequentialshooting speed varies depending on the setting of image quality.
c Pictures can be taken at a faster speed than normal sequentialshooting.
d Sequential shooting at a speed of approximately 13.5 frames/sec. [PRE-CAPTURE] can be set. When set to [ON], pressing the
shutter button halfway stores 10 frames of a pictureimmediately before shooting.
PRE-CAPTURE OFF / ON
i Adjusts the focus 1 frame at a time. The shooting speed is slowerthan for normal sequential shooting.
BKT Takes pictures sequentially while changing the exposure for eachframe (Bracket shooting). Focus and white balance are locked atthe first frame. When [BKT] is selected, the exposure differential and number
of frames can be set.
Exposure differential 0.3 / 0.7 / 1.0
Number of frames 3 / 5
8/8/2019 Olympus Cam Manual
41/89
EN 41
Menuoperations
This function allows you to zoom up to 30 by combining the optical zoom and image cropping.As data with few pixels are not converted to multiple pixels, there is no loss of image quality. [IMAGE SIZE] is limited to [I] and lower. [FINE ZOOM] cannot be used in combination with [DIGITAL ZOOM].
The digital zoom can be used to take close-up pictures with stronger magnification than the opticalzoom.
The [FACE DETECT] may not be able to detect the face for some subjects. If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [AREA] cannot be set.
FINE ZOOM ................................. Zooming in on your subject without reducing image quality
OFF /ON
DIGITAL ZOOM .................................................................... Zooming in on your subject
OFF /ON
METERING ................................ Changing the area for measuring the brightness of a subject
ESP Meters the brightness at the center of the monitor and the surroundingarea separately to capture an image with balanced brightness. Whentaking pictures against strong backlight, the center of the picture mayappear dark.
n The AF target mark area is metered. Recommended for taking apicture against strong backlight.
J Meters the brightness over a wide area with emphasis on the center ofthe screen. This method is used when you do not want to allowsurrounding light to affect the picture.
AF MODE .............................................................................. Changing the focusing area
FACE DETECT When a face is being detected in the screen, the camera will focus onthe face. A frame is displayed at the detected position.
iESP The camera determines which subject within the screen to focus on.Even when the subject is not in the center of the screen, focusing ispossible.
SPOT Focus selection is based on the subject within the AF target mark.
AREA Move the AF target mark to select the area you want to focus on to take
a picture.
Zoom barWhite: The optical zoom areaYellow: The digital zoom area
Optical zoom Digital zoom
Maximum magnification:Still picture shooting modes
Optical zoom digital zoom: Approx. 100 (max.)Movie shooting mode
Optical zoom digital zoom: Approx. 60 (max.)
WW TT0M10M
P
44INORMNORM 1/4001/400 F3.5F3.5WW TT0M10M
P
44INORMNORM 1/4001/400 F3.5F3.5
8/8/2019 Olympus Cam Manual
42/89
42 EN
Menuoperation
s
When [AREA] is selected
AF predict continues to operate while the shutter button is pressed halfway ({ blinks). Depending on the subject, the picture may be out of focus even if [AF PREDICT] is set. During macro and super macro mode, [AF PREDICT] is not available.
This function stabilizes the blur caused by camera movement when taking pictures.
When taking pictures with the camera stabilized (using a tripod), set to [OFF]. Images may not be correctable if the camera is severely shaken. During night shooting or when the shutter speed is very slow, the Digital image stabilization
mode may not work.
Depending on situations such as shooting small subjects or distant backgrounds, it may beadvisable to adjust the amount of light emitted by the flash. In addition, this function is useful whenincreased contrast is desired.
Press 12 to adjust, and press o.
To move the AF target markThe AF target mark changes toV. Use the arrow pad tomove the position of the AF target mark.You can take pictures while in this status.
To set the position of the AF target markHold down o.To change the position of the mark, hold down o again.
FULLTIME AF ...................................... Shooting pictures while keeping the subject in focus
OFF Press the shutter button halfway to focus.
ON Fulltime AF keeps the subject in front of the lens in focus at all times,without having to press the shutter button halfway. The focusing timeis reduced, so you will not miss snapshot opportunities. Also, thesubject is automatically kept in focus during movie recording.
AF PREDICT .................... Shooting pictures with the focus on subjects moving back and forth
OFF AF predict is deactivated.
ON When activated, position the AF target mark on the subject and pressthe shutter button halfway to engage the AF predict. Then, press theshutter button completely to take the picture.
AF ILLUMINAT. ............................................. Setting to light the illuminator in a dark place
OFF AF illuminator does not light.
ON Press the shutter button halfway. The AF illuminator lightsautomatically, allowing you to focus in a dark place.
IMAGE STABILIZER .............................. Shooting pictures using dual image stabilization
OFF Dual image stabilization is deactivated.
ON Dual image stabilization is activated after pressing the shutter buttonhalfway.
w ............................................................ Adjusting the amount of light emitted by the flash
-2.0EV to 0.0 to +2.0EV
P
1/4001/400 F3.5F3.5
8/8/2019 Olympus Cam Manual
43/89
EN 43
Menuoperations
Selecting an emission level When flash is set to [SLAVE], flash mode automatically changes to [#] (Fill-in flash) for all flash
modes except [$] (Flash off).
It automatically starts recording for about 4 seconds after shooting pictures.When recording, aim the camera microphone at the source of the sound you want to record.
QFLASH ........................................................................ Setting to use an external flashINT/EXT Allows you to take pictures using the built-in flash or a dedicated
external flash.g External flash shooting (P.82)
#RC Allows you to take pictures using a flash that is compatible with theOlympus wireless RC flash system.
g Shooting with the Olympus wireless RC flash system (P.84)SLAVE When using a commercially available slave flash that is synchronized
with the camera flash, the amount of the light emitted by the flash canbe adjusted in 10 levels.
Press 12 to select an emission level from [1] to [10], then presso. The bigger number indicates the bigger amount of light emittedby the flash.
The flash can fire in sequential shooting mode, but the intervalbetween shots will be longer if a high emission level is set.
R (still pictures) ......................................................... Recording sound with still picturesOFF /ON
> .................................................................. Adjusting the white balance compensation The white balance can be adjusted in 7 increments in both the
[BLUE] and [RED] directions.
12
::
Each press makes the color more blue.Each press makes the color more red.
Press o after setting is complete.
PICTURE MODE ....................................................... Adjusting the color tone of the image
VIVID Produces vivid colors.
NATURAL Produces natural colors.
SLAVE FLASH
1
MENUBACK SET OK
>
RED
BLUE
MENUBACK SET OK
8/8/2019 Olympus Cam Manual
44/89
44 EN
Menuoperation
s
This function may not work effectively with some shooting conditions or subjects.
SHARPNESS ........................................................... Adjusting the sharpness of the image
1 (Toward +) : The image contours are emphasized,making the image appear sharper. Ifyou adjust the sharpness too far toward+, noise may become conspicuous inthe picture.
2 (Toward ) : The image contours are softened.
CONTRAST ................................................................ Adjusting the contrast of the image
1 (Toward +) : The light and dark areas are definedmore clearly, making the image lookcrisper.
2 (Toward ) : The light and dark areas become lessdefined, giving the image a softerimpression.
SATURATION ........................................................... Adjusting the saturation of the image
1 (Toward +) : Colors become stronger.
2 (Toward ) : Colors become weaker.
NOISE REDUCT. .............................................. Reducing the noise during long exposures
OFF Noise is not reduced. Noise may be conspicuous at slow shutter speeds.
ON Noise is reduced. Shooting time takes twice as long as usual. Shootingis not available during noise reduction. Noise reduction can only be usedwhen the shutter speed is slower than 1/2 sec.
MENU
CAMERA MENU
BACK SET OK
PICTURE MODE
SHARPNESS
CONTRAST
SATURATION
NOISE REDUCT.
1
2
3
4
5
SHARPNESS
0
MENU
CAMERA MENU
BACK SET OK
PICTURE MODE
SHARPNESS
CONTRAST
SATURATION
NOISE REDUCT.
1
2
3
4
5
CONTRAST
0
MENU
CAMERA MENU
BACK SET OK
PICTURE MODE
SHARPNESS
CONTRAST
SATURATION
NOISE REDUCT.
1
2
3
4
5
SATURATION
0
8/8/2019 Olympus Cam Manual
45/89
EN 45
Menuoperations
If you will be taking pictures over a long period, make sure to use fully charged batteries or theAC adapter.
If any of the following operations occur during sleep mode, the camera cancels the timelapsemode and returns to normal shooting.
Opening the battery compartment cover, opening the card cover, connecting the camera to acomputer, operating the shutter button, arrow pad or other button.
If the internal memory/card becomes full or the battery power runs out during timelapse shooting,a warning is displayed, timelapse stops and the camera automatically turns off.
Set this function when shooting with the camera using a conversion lens (option) specified byOlympus. Using the built-in flash with the conversion lens attached can cause vignetting. Use an external
flash if required. When the conversion lens is attached, the camera may take some time to focus.
If the camera is more than 1 m (3.3 ft.) away from the source of the sound, sound may not be
recorded clearly. When [R] (movies) is set to [ON], [IMAGE STABILIZER] is not available. If [FULLTIME AF] and [R] (movies) are both set to [ON], the sound of operating lens may be
recorded.
This function allows you to turn off operational sounds that occur during shooting and playback,warning beeps, shutter sounds, etc.
TIMELAPSE .............................. Shooting pictures automatically as defined by set conditions
OFF Timelapse shooting is deactivated.
ON Timelapse shooting is activated.
When setting the timelapse shooting Press 4 3 to select [PICTURES] and [INTERVAL]. Press 12 to set the value. Press o to set. The first picture is taken when the shutter button is pressed, and
the pictures thereafter are automatically taken. During timelapse, the Lmark lights on the monitor. When recording to either the internal memory or the card, and
after the first picture is taken, the camera enters sleep mode. Thecamera automatically reactivates from sleep mode 4 secondsprior to taking the next picture.
When the preset number of pictures is taken, the cameraautomatically turns off.
1 ........................................................................... Shooting pictures with conversion lensOFF /ON
R (movies) ......................................................................... Recording sound with moviesOFF /ON
6 SILENT MODE Setting to turn off operational sounds
OFF /ON
TIMELAPSE
PICTURES
2
INTERVAL
1
MENUBACK SET OK
Number ofshots: 2 to 99
Shootinginterval: 1 to99 minutes in1 minuteintervals
8/8/2019 Olympus Cam Manual
46/89
46 EN
Menuoperation
s
g SETUP menus (P.52)SILENT MODE Setting to turn off operational sounds (P.45)
The factory default settings are displayed in gray ( ).
Only the first frame of each movie is displayed. Press o orm to cancel the slideshow.
This function allows you to correct the taken picture and save it as a new picture.
When red eye is not detected with [REDEYE FIX], press 4 to cancel the correction. Movies, pictures shot by another camera, and previously fixed or edited pictures cannot be corrected. Some pictures may not be corrected completely. Editing an image may cause it to suffer a minor loss in quality.
Playback mode menu
4EDIT 6PLAYBACK MENU
RAW DATA EDIT*2
Q*2
P*2
COLOR EDIT*2
FRAME*2
LABEL*2
CALENDAR*2
LAYOUT*2
EXPRESSION EDIT*2
FACE FOCUS*2
INDEX*3
EDIT*3
MOVIE INDEX*3
0yRINDEX PLAY
*1 A card is required.
*2 This is not displayed when amovie is selected.
*3 This is not displayed when thestill picture is selected.
1 SLIDESHOW Playing back pictures automatically
Select the transition effect between pictures from [TYPE] andpress o. The [BGM] selection screen is displayed. After selectingthe [BGM], press o to start the slideshow.
TYPE NORMAL /SCROLL/FADER/
SLIDE/ZOOM DOWN/ZOOM UP/
CHECKERBOARD/BLINDS/SWIVEL/RANDOM
BGM OFF / 1 / 2
2 PERFECT FIX
Select the item to be corrected with 12 and press o.
Select the picture with 4 3 and press o.
ALL Lighting fix and red-eye fix are activatedtogether.
LIGHTING FIX Only the dark areas of an image arecorrected. Underexposed areas caused bytaking pictures against backlight or insufficientlighting are brightened.
REDEYE FIX Only red-eye fix is activated.
q
MENUEXIT SET OK
ERASEERASE
EDITEDITPLAYBACKMENUPLAYBACKMENUPERFECTFIXPERFECTFIX
SILENTMODESILENTMODE
SLIDE-SHOWSLIDE-SHOW PRINTORDERPRINTORDER
SETUPSETUP
CALENDARCALENDAR
5*14
1
2
3
7 6
TYPE
NORMAL
SCROLL
FADER
SLIDE
ZOOM DOWN
MENUBACK SET OK
PERFECT FIX
SET OK
LIGHTING FIX
REDEYE FIX
ALL
MENUEXIT
8/8/2019 Olympus Cam Manual
47/89
EN 47
Menuoperations
This function lets you playback the pictures in a calendar format, organized by the date the imageswere recorded.
Adjusts the pictures recorded in raw data format and stores them as new pictures in JPEG format.
Items that can be set with [RAW DATA EDIT]
* Available only when the picture is taken with [WB] set to [V].
This changes the image size of a picture and saves it as a new file.
Designates and crops part of a still picture and saves it as a new file.
This function lets you change the color of a picture and save it as a new picture.
3 CALENDAR Playing back the pictures in a calendar format
4 EDIT
RAW DATA EDIT ....................................... Editing the pictures recorded in raw data format
Item Settings Ref. Page
IMAGE QUALITY IMAGE SIZE : F/H/I/J/K/C/DCOMPRESSION: L/M
P.34
WB AUTO/PRESET/V* P.39
> RED7 - BLUE7 P.43
PICTURE MODE VIVID/NATURAL P.43SHARPNESS -5 - + 5 P.44
CONTRAST -5 - + 5 P.44
SATURATION -5 - + 5 P.44
Q ...................................................................................... Changing the size of picturesC 640 480 /E 320 240
P .......................................................................................... Cropping a part of pictures Press 4 3 to select the image to crop, and press o. Use the arrow pad and the control dial to adjust the position and
size of the picture, and press o.
COLOR EDIT .................................................................... Changing the color of a picture
Select the picture with 4 3 and press o. Select your desired color with the arrow pad, and press o.
1 BLACK & WHITE This changes the picture to black and white.
2 SEPIA This changes the pictures to sepia.
3 SATURATION
(HARD)
This enhances the saturation of the picture.
4 SATURATION(SOFT)
This slightly enhances the saturation of thepicture.
SET OK
COLOR EDIT
1 2
3 4
8/8/2019 Olympus Cam Manual
48/89
48 EN
Menuoperation
s
This function lets you select a frame, integrate the frame with an image, and save it as a new picture.
This function lets you select a label, integrate the label with an image, and save it as a new picture.
This function lets you select a calendar format, integrate the calendar with a picture, and save it asa new file.
FRAME .................................................................................. Add a frame to your picture
Select the picture to be framed with 4 3, and press o.(Press 12 to turn the picture 90 degrees clockwise or 90degrees counterclockwise.)
Select a frame with 4 3 and press o. Use the arrow pad and the control dial to adjust the position and
size of the picture, and press o.
LABEL .................................................................................... Add a label to your picture
Select the picture with 4 3 and press o. Select the label with 4 3, and press o. (Press 12 to rotate the
picture 90 clockwise or counterclockwise.) Use the arrow pad and the control dial to adjust the position and
size of the label, and press o. Set the color of the label with the arrow pad, and press o.
CALENDAR ......................................................... Create a calendar print with your picture
Select the picture with 4 3 and press o. Select the calendar with 4 3, and press o. (Press 12 to rotate
the picture 90 clockwise or counterclockwise.) Set the date of the calendar, and press o.
LAYOUT ..................................................................... Creating an index layout of pictures
ALL IMAGES All pictures in the internal memory or the card are added to the layout.
CALENDAR A monthly calendar appears and the pictures you want to make layoutare selected by the date.
SEL. IMAGE Pictures that you want to make layout are specified one by one.
Press 4 3 to select a layout, and press o. Select the type of layout picture, and press o. Select the pictures and press o. (When [SEL. IMAGE] is selected
in [LAYOUT] screen, press 12 to rotate the picture 90clockwise or counterclockwise.)
OK
FRAME
SETMOVE
OK
LABEL
SET
OK
CALENDAR
SET
MENU
LAYOUT
BACK SET OK
ALL IMAGES
CALENDAR
SEL.IMAGE
8/8/2019 Olympus Cam Manual
49/89
EN 49
Menuoperations
This function lets you transform a face that is largest and facing front in the picture, and save it asa new picture. Select the picture with 4 3 and press o. Use the arrow pad to select the desired effect, and press o. The face may not be detected correctly for some subjects.
This function lets you change the largest face that is facing the front and save it as a new picture. Select the picture with 4 3 and press o. The face may not be detected correctly for some subjects.
This function extracts 9 frames from a movie and saves them as a new picture containingthumbnails of each frame.
Allows you to specify a part of the movie and overwrite it, or save it as a new movie.
Allows you to capture a frame from the movie and save it as a still image in JPEG format.
This function allows you to save printing data (the number of prints and the date and timeinformation) with the pictures stored on the card.g Print settings (DPOF) (P.61)
EXPRESSION EDIT ...................................................... Transforming a face in the picture
FACE FOCUS ................................................................. Showing up a face in the picture
INDEX ...................................................................... Making an index picture from a movie
Use 4 3 to select a movie and press o. Use the arrow pad to select the first frame of the part you want to
keep, and press o. In the same manner, select the last frame ofthe part you want to keep and press o.
EDIT ................................................................................... Extracting a part of the movie
Select [NEW FILE] or [OVERWRITE], and press o. Use the arrow pad to select the first frame of the part you want to
keep, and press o. In the same manner, select the last frame ofthe part you want to keep and press o.
MOVIE INDEX ......................................................... Capturing a still image from the movie
Use 4 3 to select a movie and press o. Use the arrow pad to select the frame to capture, and press o.
5 PRINT ORDER Making print reservations (DPOF)
SELECT FIRST FRAME
SET OK
00:00 /00:3600:00 /00:36
SELECT FIRST FRAME
SET OK
00:00 /00:3600:00 /00:36IN
00:00 /00:3400:00 /00:34SET OK
8/8/2019 Olympus Cam Manual
50/89
50 EN
Menuoperation
s
Pictures taken with the camera held vertically are displayed horizontally during playback. Thisfunction allows you to turn such pictures so that they are displayed vertically. New pictureorientations are saved even when the power is turned off.
Select the picture with 4 3, and rotate it by selecting [U+90], [V0] or [T-90] with 12. Youcan rotate several frames in succession.
6 PLAYBACK MENU
0 ................................................................................................... Protecting picturesOFF /ON
Protected pictures cannot be erased with [ERASE]/[SEL. IMAGE]/
[ALL ERASE], but they are all erased by formatting. Select the picture with 4 3, and protect it by selecting [ON] with
12. You can protect several frames in succession. When apicture is protected,9 is displayed on the monitor.
y ........................................................................................................ Rotating picturesU+90/ V0 /T-90
R ........................................................................................ Adding sound to still picturesYES / NO
Sound is recorded for about 4 seconds. Use 4 3 to select a picture, select [YES] and press o to start
recording. The [BUSY] bar will be temporarily displayed.
INDEX PLAY ................................................... Selecting the playback position of the movie
Movies are played from the specified position. Use the arrow pad to select a frame. Press o to start playback
from the selected frame. Use the control dial to change the number of displayed index
frames.
ON
OFFOFF
EXIT OK
0
EXIT OK
y
U
t
+90
EXIT OK
y
U
t
0 -90
EXIT OK
y
U
t
SET OKMENUBACK
NO
YESYES
R
8/8/2019 Olympus Cam Manual
51/89
EN 51
Menuoperations
Protected pictures cannot be erased. Cancel protection before erasing protected pictures. Onceerased, pictures cannot be restored. Check each picture before erasing to avoid accidentallyerasing pictures you want to keep. When erasing the picture in the internal memory, do not insert the card into the camera. When erasing the picture from the card, insert a card into the camera in advance. You can confirm on the monitor whether the internal memory or card is being used.
g Using the internal memory or card (P.85)
Select [YES], and press o.
7 ERASE Erase selected pictures/Erase all pictures
SEL. IMAGE ............................................................................ Selecting images to erase
Use the arrow pad to select a picture, and press o to addR. Press o again to cancel the selection. When the selection is completed, pressf/S. Select [YES], and press o.
ALL ERASE ..................................... Erase all the pictures in the internal memory or the card
1
4
2
5
3
6
IN
OK SMENUBACK GO
SEL. IMAGE
8/8/2019 Olympus Cam Manual
52/89
52 EN
Menuoperation
s
*1 A card is required.*2 Not available when the mode dial is set ton.*3 Not available when the mode dial is set toh.
All existing data, including protected pictures, are erased when the internal memory or card isformatted. Make sure that you save or transfer important data to a computer before formatting. Make sure there is no card inserted in the camera when formatting the internal memory.
Be sure that the card is inserted in the camera when formatting the card. Before using non-Olympus cards or cards which have been formatted on a computer, you must
format them with this camera.
Insert the optional card into the camera. Copying data does not erase the picture in the internal memory. It takes some time to back up data. Check if the battery is not empty before starting the copy, or
use the AC adapter.
You can select a language for on-screen display. Available languages vary depending on the area
where you purchased this camera.
Select [2] and press o to set the still picture saved in the internal memory or card as the startupscreen.
When [SCREEN] is set to [OFF], [VOLUME] cannot be set.
SETUP menus
Shooting mode
SETUP
MEMORY FORMAT(FORMAT*1)
BACKUP*1
WPW ON SETUPMENU COLORSOUND SETTINGSREC VIEW
MENU DISPLAYCONTROL PANELFILE NAMEPIXEL MAPPINGsX
DUALTIMEALARM CLOCK
VIDEO OUTFRAME ASSIST*2
u*2
MY MODE SETUP*2*3
m/ftAEL/AFL BUTTON*2
CUSTOM BUTTON*2*3
MANUAL FOCUS*2*3
SLEEP
Playback mode
MEMORY FORMAT (FORMAT) .............................. Formatting the internal memory or card
BACKUP ............................................... Copying pictures in the internal memory to the card
W .................................................................................... Selecting a display language
PW ON SETUP ........................................................ Setting the startup screen and sound
SCREEN OFF (No picture is displayed.) / 1 / 2
VOLUME OFF (No sound) / LOW / HIGH
MENU COLOR ................................................................... Setting the menu screen color
NORMAL / COLOR1 / COLOR2 / COLOR3
S C NS C N
RESETRESET
PANORAMAPANORAMA
CAMERAMENUCAMERAMENUSILENTMODESILENTMODE
MENUEXIT SET OK
IMAGEQUALITYIMAGEQUALITY
SETUPSETUP
MENUEXIT SET OK
ERASEERASE
EDITEDITPLAYBACKMENUPLAYBACKMENUPERFECTFIXPERFECTFIX
SILENTMODESILENTMODE
SLIDE-SHOWSLIDE-SHOW PRINTORDERPRINTORDER
SETUPSETUP
CALENDARCALENDAR
8/8/2019 Olympus Cam Manual
53/89
EN 53
Menuoperations
You can make the following settings with [SOUND SETTINGS]. Setting the type of button operation sounds and volume. (BEEP) Selecting the sound and volume of the shutter button. (SHUTTER SOUND) Adjusting the volume of the camera warning sound. (8) Adjusting the volume during playback. (q VOLUME)
You can set all the sounds muted at once by setting [SILENT MODE].g SILENT MODE Setting to turn off operational sounds (P. 45)
Perform next operation to set whether to display on the monitor or viewfinder. When m is pressed Whenf/S is pressed in the playback mode Whenq/P is pressed in the shooting mode
g o button (OK/FUNC) Setting using the control panel or function menu (P.28)Operations using the control panel (P.29)
SOUND SETTINGS .......................................... Setting the sounds output from the camera
BEEP SOUND TYPE 1 / 2
VOLUME OFF (No sound) / LOW /
top related